1 1.141 tsutsui # $NetBSD: GENERIC3X,v 1.141 2022/08/17 19:13:05 tsutsui Exp $ 2 1.11 gwr 3 1.18 gwr # GENERIC Sun3X (3/80, 3/470) 4 1.18 gwr # Supports root on: ie0, le0, sd*, ... 5 1.1 jeremy 6 1.82 tsutsui include "arch/sun3/conf/std.sun3x" 7 1.50 atatat 8 1.131 mrg #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 9 1.1 jeremy 10 1.141 tsutsui #ident "GENERIC3X-$Revision: 1.141 $" 11 1.100 tsutsui 12 1.137 rin makeoptions COPTS="-Os -fno-unwind-tables -fno-omit-frame-pointer" 13 1.137 rin # Bootloader has size limit (~2MB). -fno-omit-frame-pointer is 14 1.137 rin # necessary for backtraces in DDB. 15 1.82 tsutsui 16 1.19 gwr # Machines to be supported by this kernel 17 1.82 tsutsui #options FPU_EMULATE # XXX - Ever needed? 18 1.82 tsutsui #options HAVE_IOCACHE # XXX - Not yet supported. 19 1.1 jeremy 20 1.1 jeremy # Needs to be set per system. i.e change these as you see fit 21 1.1 jeremy maxusers 4 22 1.1 jeremy 23 1.1 jeremy # Standard system options 24 1.10 gwr options KTRACE # system call tracing 25 1.10 gwr options SYSVMSG # System V message queues 26 1.10 gwr options SYSVSEM # System V semaphores 27 1.10 gwr options SYSVSHM # System V shared memory 28 1.108 tsutsui 29 1.110 tsutsui #options MODULAR # new style module(7) framework 30 1.125 jnemeth #options MODULAR_DEFAULT_AUTOLOAD 31 1.108 tsutsui 32 1.10 gwr #options INSECURE # disable kernel security level 33 1.100 tsutsui #options USERCONF # userconf(4) support 34 1.131 mrg options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 35 1.131 mrg #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 36 1.1 jeremy 37 1.130 sevan # Alternate buffer queue strategies for better responsiveness under high 38 1.130 sevan # disk I/O load. 39 1.73 tsutsui #options BUFQ_READPRIO 40 1.73 tsutsui #options BUFQ_PRIOCSCAN 41 1.54 tsutsui 42 1.10 gwr # Which kernel debugger? Uncomment either this: 43 1.1 jeremy options DDB 44 1.1 jeremy # ... or these for KGDB (gdb remote target) 45 1.44 lukem #makeoptions DEBUG="-g" # debugging symbols for gdb 46 1.1 jeremy #options KGDB 47 1.43 lukem #options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01 48 1.10 gwr 49 1.10 gwr # Other debugging options 50 1.14 lukem #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 51 1.10 gwr #options DEBUG # kernel debugging code 52 1.10 gwr #options DIAGNOSTIC # extra kernel sanity checking 53 1.10 gwr #options PMAP_DEBUG 54 1.10 gwr #options SCSIDEBUG 55 1.9 mjacob #options SCSIVERBOSE # Verbose SCSI errors 56 1.1 jeremy 57 1.39 wiz # Compatibility options 58 1.131 mrg # Originally in NetBSD 1.0, but limited to 6.0 for size. 59 1.131 mrg #include "conf/compat_netbsd10.config" 60 1.131 mrg include "conf/compat_netbsd60.config" 61 1.131 mrg #options COMPAT_AOUT_M68K # support for NetBSD a.out executables 62 1.23 gwr #options COMPAT_LINUX # can run Linux/m68k executables 63 1.139 nia #options COMPAT_OSSAUDIO # can run Linux/m68k executables 64 1.131 mrg #options EXEC_AOUT # support for a.out executables 65 1.131 mrg #options COMPAT_SUNOS # can run SunOS 4.1.1 executables 66 1.10 gwr 67 1.140 simonb # File systems 68 1.10 gwr file-system FFS # Berkeley Fast Filesystem 69 1.10 gwr file-system NFS # Sun NFS client support 70 1.7 lukem file-system CD9660 # ISO 9660 + Rock Ridge file system 71 1.5 jeremy file-system MSDOSFS # MS-DOS FAT file system 72 1.131 mrg #file-system FDESC # /dev/fd/* 73 1.131 mrg #file-system KERNFS # /kern 74 1.7 lukem file-system NULLFS # loopback file system 75 1.100 tsutsui #file-system OVERLAY # overlay file system 76 1.7 lukem file-system PROCFS # /proc 77 1.100 tsutsui #file-system UNION # union file system 78 1.7 lukem file-system MFS # memory-based filesystem 79 1.80 christos file-system PTYFS # /dev/pts/N support 80 1.131 mrg # Disabled as 20KB larger than MFS. 81 1.131 mrg #file-system TMPFS # Efficient memory file-system 82 1.85 tsutsui #file-system UDF # experimental - OSTA UDF CD/DVD file-system 83 1.1 jeremy 84 1.140 simonb # File system options 85 1.140 simonb #options FFS_EI # FFS Endian Independent support 86 1.140 simonb options FFS_NO_SNAPSHOT # No FFS snapshot support 87 1.111 bouyer #options QUOTA # legacy UFS quotas 88 1.111 bouyer #options QUOTA2 # new, in-filesystem UFS quotas 89 1.140 simonb #options UFS_DIRHASH # UFS Large Directory Hashing 90 1.140 simonb #options UFS_EXTATTR # Extended attribute support for UFS1 91 1.131 mrg #options WAPBL # File system journaling support 92 1.140 simonb #options NFSSERVER # Network File System server 93 1.28 tsutsui 94 1.1 jeremy # Networking options 95 1.81 isaki options INET # IP protocol stack support 96 1.131 mrg #options INET6 # IPV6 97 1.28 tsutsui #options IPSEC # IP security 98 1.28 tsutsui #options IPSEC_DEBUG # debug for IP security 99 1.7 lukem #options GATEWAY # IP packet forwarding 100 1.40 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 101 1.10 gwr 102 1.62 abs #options ALTQ # Manipulate network interfaces' output queues 103 1.62 abs #options ALTQ_BLUE # Stochastic Fair Blue 104 1.62 abs #options ALTQ_CBQ # Class-Based Queueing 105 1.62 abs #options ALTQ_CDNR # Diffserv Traffic Conditioner 106 1.62 abs #options ALTQ_FIFOQ # First-In First-Out Queue 107 1.62 abs #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 108 1.62 abs #options ALTQ_HFSC # Hierarchical Fair Service Curve 109 1.62 abs #options ALTQ_LOCALQ # Local queueing discipline 110 1.62 abs #options ALTQ_PRIQ # Priority Queueing 111 1.62 abs #options ALTQ_RED # Random Early Detection 112 1.62 abs #options ALTQ_RIO # RED with IN/OUT 113 1.62 abs #options ALTQ_WFQ # Weighted Fair Queueing 114 1.62 abs 115 1.10 gwr # Work-around for root on slow servers (insurance...) 116 1.1 jeremy options NFS_BOOT_RWSIZE=1024 117 1.18 gwr options NFS_BOOT_BOOTPARAM 118 1.1 jeremy 119 1.1 jeremy config netbsd root on ? type ? 120 1.1 jeremy 121 1.18 gwr # On-board I/O space (required) 122 1.18 gwr include "arch/sun3/conf/obio.sun3x" 123 1.18 gwr 124 1.18 gwr # On-board memory (optional) 125 1.18 gwr # See frame-buffers 126 1.18 gwr obmem0 at mainbus? 127 1.18 gwr 128 1.18 gwr # VME bus support (optional) 129 1.18 gwr # One unit for each address space 130 1.18 gwr vme0 at mainbus? # A16/D16 131 1.18 gwr vme1 at mainbus? # A16/D32 132 1.18 gwr vme2 at mainbus? # A24/D16 133 1.18 gwr vme3 at mainbus? # A24/D32 134 1.18 gwr vme4 at mainbus? # A32/D16 135 1.18 gwr vme5 at mainbus? # A32/D32 136 1.18 gwr 137 1.1 jeremy # 138 1.1 jeremy # Serial ports 139 1.1 jeremy # 140 1.11 gwr zstty0 at zsc1 channel 0 # ttya 141 1.11 gwr zstty1 at zsc1 channel 1 # ttyb 142 1.1 jeremy 143 1.11 gwr kbd0 at zsc0 channel 0 # keyboard 144 1.11 gwr ms0 at zsc0 channel 1 # mouse 145 1.1 jeremy 146 1.1 jeremy # 147 1.1 jeremy # Network devices 148 1.1 jeremy # 149 1.10 gwr 150 1.18 gwr # Intel Ethernet (onboard, or VME) 151 1.10 gwr ie0 at obio0 addr 0x65000000 ipl 3 152 1.44 lukem ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 153 1.1 jeremy 154 1.1 jeremy # Lance Ethernet (only onboard) 155 1.1 jeremy le0 at obio0 addr 0x65002000 ipl 3 156 1.1 jeremy 157 1.1 jeremy # 158 1.1 jeremy # Disk and tape devices 159 1.1 jeremy # 160 1.1 jeremy 161 1.11 gwr # Emulex SCSI (3/80 only) 162 1.24 gwr # Both `dma' and `esp' are needed. 163 1.24 gwr # The following flags may be set for the NCR53c94 based esp driver: 164 1.6 gwr # bits 0-7: disable disconnect/reselect for the corresponding target 165 1.24 gwr # bits 8-15: disable synchronous negotiation for target [bit-8] 166 1.6 gwr # 167 1.24 gwr dma0 at obio0 addr 0x66001000 ipl 2 168 1.69 tsutsui esp0 at obio0 addr 0x66000000 ipl 2 flags 0x000000 169 1.5 jeremy 170 1.5 jeremy # Floppy drive 171 1.5 jeremy fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40 172 1.44 lukem fd0 at fdc0 # First (and only) floppy drive. 173 1.12 gwr 174 1.12 gwr # Sun3 "si" SCSI controller (NCR 5380) 175 1.12 gwr # This driver has several flags which may be enabled using 176 1.12 gwr # the "flags" directive. Valid flags are: 177 1.12 gwr # 178 1.12 gwr # 0x000ff Set (1<<target) to disable disconnect/reselect 179 1.12 gwr # 0x0ff00 Set (1<<(target+8)) to disable parity checking 180 1.12 gwr # 0x10000 Set this bit to disable DMA interrupts (poll) 181 1.12 gwr # 0x20000 Set this bit to disable DMA entirely (use PIO) 182 1.12 gwr # 183 1.12 gwr # For example: "flags 0x1000f" would disable DMA interrupts, 184 1.12 gwr # and disable disconnect/reselect for targets 0-3 185 1.44 lukem si0 at vme2 addr 0x200000 ipl 2 vect 0x40 186 1.44 lukem si1 at vme2 addr 0x204000 ipl 2 vect 0x41 187 1.18 gwr 188 1.18 gwr # Xylogics 450/451 controllers (VME A16/D16) 189 1.18 gwr xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 190 1.18 gwr xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 191 1.18 gwr xy* at xyc? drive ? 192 1.18 gwr 193 1.18 gwr # Xylogics 7053 controllers (VME A16/D32) 194 1.18 gwr xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 195 1.18 gwr xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 196 1.18 gwr xd* at xdc? drive ? 197 1.18 gwr 198 1.18 gwr # Xylogics 472 tape controllers? 199 1.1 jeremy 200 1.1 jeremy # 201 1.1 jeremy # Frame buffer devices 202 1.1 jeremy # 203 1.1 jeremy 204 1.19 gwr # P4 Monochrome frame buffer. 205 1.44 lukem bwtwo0 at obmem0 addr 0x50300000 206 1.141 tsutsui # The bw2 driver can also run on a cg4 overlay plane, 207 1.141 tsutsui # and the 0x40 flag means "CG overlay plane" mode. 208 1.141 tsutsui # The low 4 bits of the flags (if set) are matched 209 1.141 tsutsui # against the same bits of the machine type ID code. 210 1.141 tsutsui bwtwo0 at obmem0 addr 0x50300000 flags 0x42 # 3/80 (P4 cgfour overlay) 211 1.19 gwr 212 1.19 gwr # P4 8-bit color frame buffer 213 1.19 gwr cgfour0 at obmem0 addr 0x50300000 214 1.19 gwr 215 1.19 gwr # P4 accelerated 8-bit color frame buffer 216 1.23 gwr # cgsix0 at obmem0 addr 0x50000000 217 1.19 gwr 218 1.19 gwr # P4 24-bit color frame buffer 219 1.19 gwr # cgeight0 at obmem0 addr 0x50300000 220 1.19 gwr 221 1.19 gwr # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 222 1.19 gwr # This driver is going to need work in its mmap function. 223 1.19 gwr # cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 224 1.19 gwr 225 1.19 gwr # Support for the CG9 24-bit frame buffer (VME A32/D32). 226 1.19 gwr # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 227 1.1 jeremy 228 1.1 jeremy # 229 1.1 jeremy # SCSI infrastructure 230 1.1 jeremy # 231 1.1 jeremy scsibus* at scsi? 232 1.1 jeremy 233 1.1 jeremy sd* at scsibus? target ? lun ? # SCSI disks 234 1.1 jeremy st* at scsibus? target ? lun ? # SCSI tapes 235 1.1 jeremy cd* at scsibus? target ? lun ? # SCSI CD-ROMs 236 1.100 tsutsui #ch* at scsibus? target ? lun ? # SCSI changer devices 237 1.100 tsutsui #ss* at scsibus? target ? lun ? # SCSI scanners 238 1.1 jeremy uk* at scsibus? target ? lun ? # unknown SCSI devices 239 1.1 jeremy 240 1.102 tsutsui # 241 1.102 tsutsui # accept filters 242 1.131 mrg #pseudo-device accf_data # "dataready" accept filter 243 1.131 mrg #pseudo-device accf_http # "httpready" accept filter 244 1.102 tsutsui 245 1.1 jeremy # Memory-disk drivers 246 1.109 hannken pseudo-device md 247 1.1 jeremy 248 1.1 jeremy # Misc. 249 1.119 christos pseudo-device loop # network loopback 250 1.86 rpaulo pseudo-device bpfilter # packet filter 251 1.89 tsutsui #pseudo-device carp # Common Address Redundancy Protocol 252 1.87 cube pseudo-device sl # CSLIP 253 1.87 cube pseudo-device ppp # PPP 254 1.100 tsutsui #pseudo-device pppoe # PPP over Ethernet (RFC 2516) 255 1.100 tsutsui #pseudo-device tun # network tunneling over tty 256 1.100 tsutsui #pseudo-device tap # virtual Ethernet 257 1.87 cube #pseudo-device gre # generic L3 over IP tunnel 258 1.132 maxv #pseudo-device npf # NPF packet filter 259 1.100 tsutsui #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 260 1.87 cube #pseudo-device faith # IPv[46] tcp relay translation i/f 261 1.100 tsutsui #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 262 1.36 tsutsui pseudo-device vlan # IEEE 802.1q encapsulation 263 1.100 tsutsui #pseudo-device bridge # simple inter-network bridging 264 1.138 roy #pseudo-device vether # Virtual Ethernet for bridge 265 1.100 tsutsui #pseudo-device agr # IEEE 802.3ad link aggregation 266 1.1 jeremy 267 1.33 jdolecek pseudo-device pty # pseudo-terminals 268 1.87 cube pseudo-device vnd # paging to files 269 1.76 hubertf #options VND_COMPRESSION # compressed vnd(4) 270 1.119 christos #pseudo-device ccd # concatenated disks 271 1.119 christos #pseudo-device cgd # cryptographic disk devices 272 1.120 christos #pseudo-device raid # RAIDframe disk driver 273 1.29 tsutsui #options RAID_AUTOCONFIG # auto-configuration of RAID components 274 1.47 oster # Options to enable various other RAIDframe RAID types. 275 1.96 tsutsui #options RF_INCLUDE_EVENODD=1 276 1.96 tsutsui #options RF_INCLUDE_RAID5_RS=1 277 1.96 tsutsui #options RF_INCLUDE_PARITYLOGGING=1 278 1.96 tsutsui #options RF_INCLUDE_CHAINDECLUSTER=1 279 1.96 tsutsui #options RF_INCLUDE_INTERDECLUSTER=1 280 1.96 tsutsui #options RF_INCLUDE_PARITY_DECLUSTERING=1 281 1.96 tsutsui #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 282 1.106 pooka #pseudo-device fss # file system snapshot device 283 1.51 lukem pseudo-device clockctl # user control of clock subsystem 284 1.57 tsutsui pseudo-device ksyms # /dev/ksyms 285 1.84 tsutsui 286 1.84 tsutsui # Veriexec 287 1.134 sevan # include "dev/veriexec.config" 288