GENERIC3X revision 1.36
11.36Stsutsui# $NetBSD: GENERIC3X,v 1.36 2000/12/19 15:45:23 tsutsui Exp $
21.11Sgwr
31.18Sgwr# GENERIC Sun3X (3/80, 3/470)
41.18Sgwr# Supports root on: ie0, le0, sd*, ...
51.1Sjeremy
61.19Sgwrinclude "arch/sun3/conf/std.sun3x"
71.1Sjeremy
81.19Sgwr# Machines to be supported by this kernel
91.19Sgwr# options 	FPU_EMULATE	# XXX - Ever needed?
101.18Sgwr# options 	HAVE_IOCACHE	# XXX - Not yet supported.
111.1Sjeremy
121.1Sjeremy# Needs to be set per system.  i.e change these as you see fit
131.1Sjeremymaxusers	4
141.1Sjeremy
151.1Sjeremy# Standard system options
161.10Sgwroptions 	KTRACE		# system call tracing
171.10Sgwroptions 	SYSVMSG		# System V message queues
181.10Sgwroptions 	SYSVSEM		# System V semaphores
191.10Sgwroptions 	SYSVSHM		# System V shared memory
201.10Sgwr#options 	SHMMAXPGS=1024	# 1024 pages is the default
211.21Sfairoptions 	LKM		# loadable kernel modules
221.10Sgwr#options 	INSECURE	# disable kernel security level
231.10Sgwr#options 	UCONSOLE	# Allow non-root TIOCCONS
241.1Sjeremy
251.10Sgwr# Which kernel debugger?  Uncomment either this:
261.1Sjeremyoptions 	DDB
271.1Sjeremy# ... or these for KGDB (gdb remote target)
281.1Sjeremy#makeoptions DEBUG="-g"		# debugging symbols for gdb
291.1Sjeremy#options 	KGDB
301.1Sjeremy#options 	KGDBDEV=0x0C01	# ttya=0C00 ttyb=0C01
311.10Sgwr
321.10Sgwr# Other debugging options
331.14Slukem#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
341.10Sgwr#options 	DEBUG		# kernel debugging code
351.10Sgwr#options 	DIAGNOSTIC	# extra kernel sanity checking
361.10Sgwr#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
371.10Sgwr#options 	PMAP_DEBUG
381.10Sgwr#options 	SCSIDEBUG
391.9Smjacob#options 	SCSIVERBOSE		# Verbose SCSI errors
401.1Sjeremy
411.10Sgwr# Compatability options
421.10Sgwroptions 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
431.25Skleink#options 	COMPAT_SVR4	# can run SVR4 executables
441.10Sgwroptions 	COMPAT_43	# and 4.3BSD and ...
451.13Sgwroptions 	COMPAT_10	# NetBSD 1.0
461.13Sgwroptions 	COMPAT_11	# NetBSD 1.1
471.10Sgwroptions 	COMPAT_12	# NetBSD 1.2
481.16Skleinkoptions 	COMPAT_13	# NetBSD 1.3
491.26Saugustssoptions 	COMPAT_14	# NetBSD 1.4
501.23Sgwr#options 	COMPAT_LINUX	# can run Linux/m68k executables
511.25Skleink#options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
521.10Sgwr
531.1Sjeremy# Filesystem options
541.10Sgwrfile-system	FFS		# Berkeley Fast Filesystem
551.10Sgwrfile-system	NFS		# Sun NFS client support
561.7Slukemfile-system	CD9660		# ISO 9660 + Rock Ridge file system
571.5Sjeremyfile-system	MSDOSFS		# MS-DOS FAT file system
581.7Slukemfile-system	FDESC		# /dev/fd/*
591.7Slukemfile-system	KERNFS		# /kern
601.7Slukemfile-system	NULLFS		# loopback file system
611.29Stsutsuifile-system	OVERLAY		# overlay file system
621.7Slukemfile-system	PROCFS		# /proc
631.7Slukemfile-system	UNION		# union file system
641.7Slukemfile-system	MFS		# memory-based filesystem
651.1Sjeremy
661.1Sjeremyoptions 	NFSSERVER	# nfs server support
671.10Sgwroptions 	QUOTA		# FFS quotas
681.20Sbouyer#options 	FFS_EI		# FFS Endian Independant support
691.35Stsutsuioptions 	SOFTDEP         # FFS soft updates support.
701.28Stsutsui
711.1Sjeremy# Networking options
721.1Sjeremyoptions 	INET		# IP prototol stack support
731.28Stsutsuioptions 	INET6		# IPV6
741.28Stsutsui#options 	IPSEC		# IP security
751.28Stsutsui#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
761.28Stsutsui#options 	IPSEC_DEBUG	# debug for IP security
771.10Sgwroptions 	TCP_COMPAT_42	# compatibility with 4.2BSD TCP/IP
781.7Slukem#options 	GATEWAY		# IP packet forwarding
791.10Sgwr#options 	ISO,TPIP	# OSI networking
801.10Sgwr#options 	EON		# OSI tunneling over IP
811.10Sgwr#options 	CCITT,LLC,HDLC	# X.25
821.10Sgwr#options 	PFIL_HOOKS	# pfil(9) packet filter hooks.
831.10Sgwr
841.10Sgwr# Work-around for root on slow servers (insurance...)
851.1Sjeremyoptions 	NFS_BOOT_RWSIZE=1024
861.18Sgwroptions 	NFS_BOOT_BOOTPARAM
871.1Sjeremy
881.1Sjeremyconfig		netbsd root on ? type ?
891.1Sjeremy
901.18Sgwr# On-board I/O space (required)
911.18Sgwrinclude "arch/sun3/conf/obio.sun3x"
921.18Sgwr
931.18Sgwr# On-board memory (optional)
941.18Sgwr# See frame-buffers
951.18Sgwrobmem0 at mainbus?
961.18Sgwr
971.18Sgwr# VME bus support (optional)
981.18Sgwr# One unit for each address space
991.18Sgwrvme0 at mainbus? # A16/D16
1001.18Sgwrvme1 at mainbus? # A16/D32
1011.18Sgwrvme2 at mainbus? # A24/D16
1021.18Sgwrvme3 at mainbus? # A24/D32
1031.18Sgwrvme4 at mainbus? # A32/D16
1041.18Sgwrvme5 at mainbus? # A32/D32
1051.18Sgwr
1061.1Sjeremy#
1071.1Sjeremy# Serial ports
1081.1Sjeremy#
1091.11Sgwrzstty0	at zsc1 channel 0	# ttya
1101.11Sgwrzstty1	at zsc1 channel 1	# ttyb
1111.1Sjeremy
1121.11Sgwrkbd0	at zsc0 channel 0	# keyboard
1131.11Sgwrms0	at zsc0 channel 1	# mouse
1141.1Sjeremy
1151.1Sjeremy#
1161.1Sjeremy# Network devices
1171.1Sjeremy#
1181.10Sgwr
1191.18Sgwr# Intel Ethernet (onboard, or VME)
1201.10Sgwrie0 at obio0 addr 0x65000000 ipl 3
1211.12Sgwrie1 at vme2  addr   0xe88000 ipl 3 vect 0x75
1221.1Sjeremy
1231.1Sjeremy# Lance Ethernet (only onboard)
1241.1Sjeremyle0 at obio0 addr 0x65002000 ipl 3
1251.1Sjeremy
1261.1Sjeremy#
1271.1Sjeremy# Disk and tape devices
1281.1Sjeremy#
1291.1Sjeremy
1301.11Sgwr# Emulex SCSI (3/80 only)
1311.24Sgwr# Both `dma' and `esp' are needed.
1321.24Sgwr# The following flags may be set for the NCR53c94 based esp driver:
1331.6Sgwr#	bits 0-7:  disable disconnect/reselect for the corresponding target
1341.24Sgwr#	bits 8-15: disable synchronous negotiation for target [bit-8]
1351.6Sgwr#
1361.24Sgwrdma0 at obio0 addr 0x66001000 ipl 2
1371.6Sgwresp0 at obio0 addr 0x66000000 ipl 2 flags 0xff0f
1381.5Sjeremy
1391.5Sjeremy# Floppy drive
1401.5Sjeremyfdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40
1411.5Sjeremyfd0  at fdc0	# First (and only) floppy drive.
1421.12Sgwr
1431.12Sgwr# Sun3 "si" SCSI controller (NCR 5380)
1441.12Sgwr# This driver has several flags which may be enabled using
1451.12Sgwr# the "flags" directive.  Valid flags are:
1461.12Sgwr#
1471.12Sgwr# 0x000ff	Set (1<<target) to disable disconnect/reselect
1481.12Sgwr# 0x0ff00	Set (1<<(target+8)) to disable parity checking
1491.12Sgwr# 0x10000	Set this bit to disable DMA interrupts (poll)
1501.12Sgwr# 0x20000	Set this bit to disable DMA entirely (use PIO)
1511.12Sgwr#
1521.12Sgwr# For example: "flags 0x1000f" would disable DMA interrupts,
1531.12Sgwr# and disable disconnect/reselect for targets 0-3
1541.18Sgwrsi0 at vme2  addr 0x200000 ipl 2 vect 0x40
1551.18Sgwrsi1 at vme2  addr 0x204000 ipl 2 vect 0x41
1561.18Sgwr
1571.18Sgwr# Xylogics 450/451 controllers (VME A16/D16)
1581.18Sgwrxyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
1591.18Sgwrxyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
1601.18Sgwrxy* at xyc? drive ?
1611.18Sgwr
1621.18Sgwr# Xylogics 7053 controllers (VME A16/D32)
1631.18Sgwrxdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
1641.18Sgwrxdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
1651.18Sgwrxd* at xdc? drive ?
1661.18Sgwr
1671.18Sgwr# Xylogics 472 tape controllers?
1681.1Sjeremy
1691.1Sjeremy#
1701.1Sjeremy# Frame buffer devices
1711.1Sjeremy#
1721.1Sjeremy
1731.19Sgwr# P4 Monochrome frame buffer.
1741.19Sgwrbwtwo0  at obmem0 addr 0x50300000
1751.19Sgwr
1761.19Sgwr# P4 8-bit color frame buffer
1771.19Sgwrcgfour0 at obmem0 addr 0x50300000
1781.19Sgwr
1791.19Sgwr# P4 accelerated 8-bit color frame buffer
1801.23Sgwr# cgsix0 at obmem0 addr 0x50000000
1811.19Sgwr
1821.19Sgwr# P4 24-bit color frame buffer
1831.19Sgwr# cgeight0 at obmem0 addr 0x50300000
1841.19Sgwr
1851.19Sgwr# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
1861.19Sgwr# This driver is going to need work in its mmap function.
1871.19Sgwr# cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
1881.19Sgwr
1891.19Sgwr# Support for the CG9 24-bit frame buffer (VME A32/D32).
1901.19Sgwr# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
1911.1Sjeremy
1921.1Sjeremy#
1931.1Sjeremy# SCSI infrastructure
1941.1Sjeremy#
1951.1Sjeremyscsibus* at scsi?
1961.1Sjeremy
1971.1Sjeremysd* at scsibus? target ? lun ?		# SCSI disks
1981.1Sjeremyst* at scsibus? target ? lun ?		# SCSI tapes
1991.1Sjeremycd* at scsibus? target ? lun ?		# SCSI CD-ROMs
2001.1Sjeremych* at scsibus? target ? lun ?		# SCSI changer devices
2011.1Sjeremyss* at scsibus? target ? lun ?		# SCSI scanners
2021.1Sjeremyuk* at scsibus? target ? lun ?		# unknown SCSI devices
2031.1Sjeremy
2041.1Sjeremy# Memory-disk drivers
2051.7Slukempseudo-device	md		2
2061.1Sjeremy
2071.1Sjeremy# Misc.
2081.7Slukempseudo-device	loop		1	# network loopback
2091.7Slukempseudo-device	bpfilter	8	# packet filter
2101.7Slukempseudo-device	sl		2	# CSLIP
2111.7Slukempseudo-device	ppp		2	# PPP
2121.7Slukempseudo-device	tun		2	# network tunneling over tty
2131.23Sgwr#pseudo-device	gre		2	# generic L3 over IP tunnel
2141.1Sjeremy#pseudo-device	ipfilter		# ip filter
2151.28Stsutsuipseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
2161.28Stsutsui#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
2171.31Stsutsui#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
2181.36Stsutsuipseudo-device	vlan			# IEEE 802.1q encapsulation
2191.15Sfair# rnd is EXPERIMENTAL
2201.34Sitojunpseudo-device	rnd			# /dev/random and in-kernel generator
2211.1Sjeremy
2221.33Sjdolecekpseudo-device	pty			# pseudo-terminals
2231.30Stsutsuipseudo-device	vnd		4	# paging to files
2241.7Slukem#pseudo-device	ccd		4	# concatenated disks
2251.23Sgwr#pseudo-device	raid		4	# RAIDframe disk driver
2261.29Stsutsui#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
227