Home | History | Annotate | Line # | Download | only in conf
GENERIC3X revision 1.96
      1  1.96   tsutsui # $NetBSD: GENERIC3X,v 1.96 2007/07/18 15:48:49 tsutsui Exp $
      2  1.11       gwr 
      3  1.18       gwr # GENERIC Sun3X (3/80, 3/470)
      4  1.18       gwr # Supports root on: ie0, le0, sd*, ...
      5   1.1    jeremy 
      6  1.82   tsutsui include 	"arch/sun3/conf/std.sun3x"
      7  1.50    atatat 
      8  1.50    atatat options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
      9   1.1    jeremy 
     10  1.96   tsutsui #ident		"GENERIC3X-$Revision: 1.96 $"
     11  1.82   tsutsui 
     12  1.19       gwr # Machines to be supported by this kernel
     13  1.82   tsutsui #options 	FPU_EMULATE	# XXX - Ever needed?
     14  1.82   tsutsui #options 	HAVE_IOCACHE	# XXX - Not yet supported.
     15   1.1    jeremy 
     16   1.1    jeremy # Needs to be set per system.  i.e change these as you see fit
     17   1.1    jeremy maxusers	4
     18   1.1    jeremy 
     19   1.1    jeremy # Standard system options
     20  1.10       gwr options 	KTRACE		# system call tracing
     21  1.90  christos #options 	SYSTRACE	# system call vetting via systrace(1)
     22  1.10       gwr options 	SYSVMSG		# System V message queues
     23  1.10       gwr options 	SYSVSEM		# System V semaphores
     24  1.53   tsutsui #options 	SEMMNI=10	# number of semaphore identifiers
     25  1.53   tsutsui #options 	SEMMNS=60	# number of semaphores in system
     26  1.53   tsutsui #options 	SEMUME=10	# max number of undo entries per process
     27  1.53   tsutsui #options 	SEMMNU=30	# number of undo structures in system
     28  1.10       gwr options 	SYSVSHM		# System V shared memory
     29  1.10       gwr #options 	SHMMAXPGS=1024	# 1024 pages is the default
     30  1.63    bouyer options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
     31  1.21      fair options 	LKM		# loadable kernel modules
     32  1.10       gwr #options 	INSECURE	# disable kernel security level
     33  1.52     lukem options 	USERCONF	# userconf(4) support
     34  1.96   tsutsui #options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
     35  1.64    atatat options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
     36   1.1    jeremy 
     37  1.55       wiz # Enable experimental buffer queue strategy for better responsiveness under 
     38  1.54   tsutsui # high disk I/O load. Use it with caution - it's not proven to be stable yet.
     39  1.73   tsutsui #options 	BUFQ_READPRIO
     40  1.73   tsutsui #options 	BUFQ_PRIOCSCAN
     41  1.54   tsutsui 
     42  1.10       gwr # Which kernel debugger?  Uncomment either this:
     43   1.1    jeremy options 	DDB
     44   1.1    jeremy # ... or these for KGDB (gdb remote target)
     45  1.44     lukem #makeoptions	DEBUG="-g"	# debugging symbols for gdb
     46   1.1    jeremy #options 	KGDB
     47  1.43     lukem #options 	KGDB_DEV=0x0C01	# ttya=0C00 ttyb=0C01
     48  1.10       gwr 
     49  1.10       gwr # Other debugging options
     50  1.14     lukem #options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
     51  1.10       gwr #options 	DEBUG		# kernel debugging code
     52  1.10       gwr #options 	DIAGNOSTIC	# extra kernel sanity checking
     53  1.10       gwr #options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
     54  1.10       gwr #options 	PMAP_DEBUG
     55  1.10       gwr #options 	SCSIDEBUG
     56   1.9    mjacob #options 	SCSIVERBOSE		# Verbose SCSI errors
     57   1.1    jeremy 
     58  1.39       wiz # Compatibility options
     59  1.10       gwr options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
     60  1.25    kleink #options 	COMPAT_SVR4	# can run SVR4 executables
     61  1.10       gwr options 	COMPAT_43	# and 4.3BSD and ...
     62  1.13       gwr options 	COMPAT_10	# NetBSD 1.0
     63  1.13       gwr options 	COMPAT_11	# NetBSD 1.1
     64  1.10       gwr options 	COMPAT_12	# NetBSD 1.2
     65  1.16    kleink options 	COMPAT_13	# NetBSD 1.3
     66  1.26  augustss options 	COMPAT_14	# NetBSD 1.4
     67  1.93      manu options 	COMPAT_15	# NetBSD 1.5
     68  1.58        cl options 	COMPAT_16	# NetBSD 1.6
     69  1.67   tsutsui options 	COMPAT_20	# NetBSD 2.0
     70  1.96   tsutsui options 	COMPAT_30	# NetBSD 3.0
     71  1.96   tsutsui options 	COMPAT_40	# NetBSD 4.0 compatibility.
     72  1.38       chs options 	COMPAT_AOUT_M68K # support for NetBSD a.out executables
     73  1.23       gwr #options 	COMPAT_LINUX	# can run Linux/m68k executables
     74  1.38       chs options 	EXEC_AOUT	# support for a.out executables
     75  1.40       abs #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
     76  1.96   tsutsui options 	COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
     77  1.10       gwr 
     78   1.1    jeremy # Filesystem options
     79  1.10       gwr file-system	FFS		# Berkeley Fast Filesystem
     80  1.10       gwr file-system	NFS		# Sun NFS client support
     81   1.7     lukem file-system	CD9660		# ISO 9660 + Rock Ridge file system
     82   1.5    jeremy file-system	MSDOSFS		# MS-DOS FAT file system
     83   1.7     lukem file-system	FDESC		# /dev/fd/*
     84   1.7     lukem file-system	KERNFS		# /kern
     85   1.7     lukem file-system	NULLFS		# loopback file system
     86  1.29   tsutsui file-system	OVERLAY		# overlay file system
     87   1.7     lukem file-system	PROCFS		# /proc
     88   1.7     lukem file-system	UNION		# union file system
     89   1.7     lukem file-system	MFS		# memory-based filesystem
     90  1.80  christos file-system	PTYFS		# /dev/pts/N support
     91  1.94      jmmv #file-system	TMPFS		# Efficient memory file-system
     92  1.85   tsutsui #file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
     93   1.1    jeremy 
     94   1.1    jeremy options 	NFSSERVER	# nfs server support
     95  1.10       gwr options 	QUOTA		# FFS quotas
     96  1.20    bouyer #options 	FFS_EI		# FFS Endian Independant support
     97  1.44     lukem options 	SOFTDEP		# FFS soft updates support.
     98  1.96   tsutsui #options 	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
     99  1.83   tsutsui #options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
    100  1.28   tsutsui 
    101   1.1    jeremy # Networking options
    102  1.81     isaki options 	INET		# IP protocol stack support
    103  1.28   tsutsui options 	INET6		# IPV6
    104  1.28   tsutsui #options 	IPSEC		# IP security
    105  1.28   tsutsui #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
    106  1.75      tron #options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
    107  1.28   tsutsui #options 	IPSEC_DEBUG	# debug for IP security
    108   1.7     lukem #options 	GATEWAY		# IP packet forwarding
    109  1.10       gwr #options 	ISO,TPIP	# OSI networking
    110  1.10       gwr #options 	EON		# OSI tunneling over IP
    111  1.82   tsutsui options 	PFIL_HOOKS	# pfil(9) packet filter hooks.
    112  1.40       abs #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
    113  1.10       gwr 
    114  1.62       abs #options 	ALTQ		# Manipulate network interfaces' output queues
    115  1.62       abs #options 	ALTQ_BLUE	# Stochastic Fair Blue
    116  1.62       abs #options 	ALTQ_CBQ	# Class-Based Queueing
    117  1.62       abs #options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
    118  1.62       abs #options 	ALTQ_FIFOQ	# First-In First-Out Queue
    119  1.62       abs #options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
    120  1.62       abs #options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
    121  1.62       abs #options 	ALTQ_LOCALQ	# Local queueing discipline
    122  1.62       abs #options 	ALTQ_PRIQ	# Priority Queueing
    123  1.62       abs #options 	ALTQ_RED	# Random Early Detection
    124  1.62       abs #options 	ALTQ_RIO	# RED with IN/OUT
    125  1.62       abs #options 	ALTQ_WFQ	# Weighted Fair Queueing
    126  1.62       abs 
    127  1.10       gwr # Work-around for root on slow servers (insurance...)
    128   1.1    jeremy options 	NFS_BOOT_RWSIZE=1024
    129  1.18       gwr options 	NFS_BOOT_BOOTPARAM
    130   1.1    jeremy 
    131   1.1    jeremy config		netbsd root on ? type ?
    132   1.1    jeremy 
    133  1.18       gwr # On-board I/O space (required)
    134  1.18       gwr include "arch/sun3/conf/obio.sun3x"
    135  1.18       gwr 
    136  1.18       gwr # On-board memory (optional)
    137  1.18       gwr # See frame-buffers
    138  1.18       gwr obmem0 at mainbus?
    139  1.18       gwr 
    140  1.18       gwr # VME bus support (optional)
    141  1.18       gwr # One unit for each address space
    142  1.18       gwr vme0 at mainbus? # A16/D16
    143  1.18       gwr vme1 at mainbus? # A16/D32
    144  1.18       gwr vme2 at mainbus? # A24/D16
    145  1.18       gwr vme3 at mainbus? # A24/D32
    146  1.18       gwr vme4 at mainbus? # A32/D16
    147  1.18       gwr vme5 at mainbus? # A32/D32
    148  1.18       gwr 
    149   1.1    jeremy #
    150   1.1    jeremy # Serial ports
    151   1.1    jeremy #
    152  1.11       gwr zstty0	at zsc1 channel 0	# ttya
    153  1.11       gwr zstty1	at zsc1 channel 1	# ttyb
    154   1.1    jeremy 
    155  1.11       gwr kbd0	at zsc0 channel 0	# keyboard
    156  1.11       gwr ms0	at zsc0 channel 1	# mouse
    157   1.1    jeremy 
    158   1.1    jeremy #
    159   1.1    jeremy # Network devices
    160   1.1    jeremy #
    161  1.10       gwr 
    162  1.18       gwr # Intel Ethernet (onboard, or VME)
    163  1.10       gwr ie0 at obio0 addr 0x65000000 ipl 3
    164  1.44     lukem ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
    165   1.1    jeremy 
    166   1.1    jeremy # Lance Ethernet (only onboard)
    167   1.1    jeremy le0 at obio0 addr 0x65002000 ipl 3
    168   1.1    jeremy 
    169   1.1    jeremy #
    170   1.1    jeremy # Disk and tape devices
    171   1.1    jeremy #
    172   1.1    jeremy 
    173  1.11       gwr # Emulex SCSI (3/80 only)
    174  1.24       gwr # Both `dma' and `esp' are needed.
    175  1.24       gwr # The following flags may be set for the NCR53c94 based esp driver:
    176   1.6       gwr #	bits 0-7:  disable disconnect/reselect for the corresponding target
    177  1.24       gwr #	bits 8-15: disable synchronous negotiation for target [bit-8]
    178   1.6       gwr #
    179  1.24       gwr dma0 at obio0 addr 0x66001000 ipl 2
    180  1.69   tsutsui esp0 at obio0 addr 0x66000000 ipl 2 flags 0x000000
    181   1.5    jeremy 
    182   1.5    jeremy # Floppy drive
    183   1.5    jeremy fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40
    184  1.44     lukem fd0	at fdc0	# First (and only) floppy drive.
    185  1.12       gwr 
    186  1.12       gwr # Sun3 "si" SCSI controller (NCR 5380)
    187  1.12       gwr # This driver has several flags which may be enabled using
    188  1.12       gwr # the "flags" directive.  Valid flags are:
    189  1.12       gwr #
    190  1.12       gwr # 0x000ff	Set (1<<target) to disable disconnect/reselect
    191  1.12       gwr # 0x0ff00	Set (1<<(target+8)) to disable parity checking
    192  1.12       gwr # 0x10000	Set this bit to disable DMA interrupts (poll)
    193  1.12       gwr # 0x20000	Set this bit to disable DMA entirely (use PIO)
    194  1.12       gwr #
    195  1.12       gwr # For example: "flags 0x1000f" would disable DMA interrupts,
    196  1.12       gwr # and disable disconnect/reselect for targets 0-3
    197  1.44     lukem si0 at vme2 addr 0x200000 ipl 2 vect 0x40
    198  1.44     lukem si1 at vme2 addr 0x204000 ipl 2 vect 0x41
    199  1.18       gwr 
    200  1.18       gwr # Xylogics 450/451 controllers (VME A16/D16)
    201  1.18       gwr xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
    202  1.18       gwr xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
    203  1.18       gwr xy* at xyc? drive ?
    204  1.18       gwr 
    205  1.18       gwr # Xylogics 7053 controllers (VME A16/D32)
    206  1.18       gwr xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
    207  1.18       gwr xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
    208  1.18       gwr xd* at xdc? drive ?
    209  1.18       gwr 
    210  1.18       gwr # Xylogics 472 tape controllers?
    211   1.1    jeremy 
    212   1.1    jeremy #
    213   1.1    jeremy # Frame buffer devices
    214   1.1    jeremy #
    215   1.1    jeremy 
    216  1.19       gwr # P4 Monochrome frame buffer.
    217  1.44     lukem bwtwo0	at obmem0 addr 0x50300000
    218  1.19       gwr 
    219  1.19       gwr # P4 8-bit color frame buffer
    220  1.19       gwr cgfour0 at obmem0 addr 0x50300000
    221  1.19       gwr 
    222  1.19       gwr # P4 accelerated 8-bit color frame buffer
    223  1.23       gwr # cgsix0 at obmem0 addr 0x50000000
    224  1.19       gwr 
    225  1.19       gwr # P4 24-bit color frame buffer
    226  1.19       gwr # cgeight0 at obmem0 addr 0x50300000
    227  1.19       gwr 
    228  1.19       gwr # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
    229  1.19       gwr # This driver is going to need work in its mmap function.
    230  1.19       gwr # cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
    231  1.19       gwr 
    232  1.19       gwr # Support for the CG9 24-bit frame buffer (VME A32/D32).
    233  1.19       gwr # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
    234   1.1    jeremy 
    235   1.1    jeremy #
    236   1.1    jeremy # SCSI infrastructure
    237   1.1    jeremy #
    238   1.1    jeremy scsibus* at scsi?
    239   1.1    jeremy 
    240   1.1    jeremy sd* at scsibus? target ? lun ?		# SCSI disks
    241   1.1    jeremy st* at scsibus? target ? lun ?		# SCSI tapes
    242   1.1    jeremy cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
    243   1.1    jeremy ch* at scsibus? target ? lun ?		# SCSI changer devices
    244   1.1    jeremy ss* at scsibus? target ? lun ?		# SCSI scanners
    245   1.1    jeremy uk* at scsibus? target ? lun ?		# unknown SCSI devices
    246   1.1    jeremy 
    247   1.1    jeremy # Memory-disk drivers
    248   1.7     lukem pseudo-device	md		2
    249   1.1    jeremy 
    250   1.1    jeremy # Misc.
    251   1.7     lukem pseudo-device	loop		1	# network loopback
    252  1.86    rpaulo pseudo-device	bpfilter		# packet filter
    253  1.89   tsutsui #pseudo-device	carp			# Common Address Redundancy Protocol
    254  1.87      cube pseudo-device	sl			# CSLIP
    255  1.87      cube pseudo-device	ppp			# PPP
    256  1.46    martin pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    257  1.87      cube pseudo-device	tun			# network tunneling over tty
    258  1.66      cube pseudo-device	tap			# virtual Ethernet
    259  1.87      cube #pseudo-device	gre			# generic L3 over IP tunnel
    260   1.1    jeremy #pseudo-device	ipfilter		# ip filter
    261  1.87      cube pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
    262  1.87      cube #pseudo-device	faith			# IPv[46] tcp relay translation i/f
    263  1.88     pavel pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
    264  1.36   tsutsui pseudo-device	vlan			# IEEE 802.1q encapsulation
    265  1.45    atatat pseudo-device	bridge			# simple inter-network bridging
    266  1.95    martin pseudo-device	agr			# IEEE 802.3ad link aggregation
    267  1.57   tsutsui #options 	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
    268  1.34    itojun pseudo-device	rnd			# /dev/random and in-kernel generator
    269   1.1    jeremy 
    270  1.33  jdolecek pseudo-device	pty			# pseudo-terminals
    271  1.87      cube pseudo-device	vnd			# paging to files
    272  1.76   hubertf #options 	VND_COMPRESSION		# compressed vnd(4)
    273   1.7     lukem #pseudo-device	ccd		4	# concatenated disks
    274  1.54   tsutsui #pseudo-device	cgd		4	# cryptographic disk devices
    275  1.23       gwr #pseudo-device	raid		4	# RAIDframe disk driver
    276  1.29   tsutsui #options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    277  1.47     oster # Options to enable various other RAIDframe RAID types.
    278  1.96   tsutsui #options 	RF_INCLUDE_EVENODD=1
    279  1.96   tsutsui #options 	RF_INCLUDE_RAID5_RS=1
    280  1.96   tsutsui #options 	RF_INCLUDE_PARITYLOGGING=1
    281  1.96   tsutsui #options 	RF_INCLUDE_CHAINDECLUSTER=1
    282  1.96   tsutsui #options 	RF_INCLUDE_INTERDECLUSTER=1
    283  1.96   tsutsui #options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    284  1.96   tsutsui #options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    285  1.70   hannken pseudo-device	fss		4	# file system snapshot device
    286  1.51     lukem pseudo-device	clockctl		# user control of clock subsystem
    287  1.57   tsutsui pseudo-device	ksyms			# /dev/ksyms
    288  1.61    itojun #pseudo-device	pf			# PF packet filter
    289  1.61    itojun #pseudo-device	pflog			# PF log if
    290  1.84   tsutsui 
    291  1.84   tsutsui # Veriexec
    292  1.84   tsutsui #
    293  1.84   tsutsui # a pseudo device needed for veriexec
    294  1.84   tsutsui #pseudo-device	veriexec		1
    295  1.84   tsutsui #
    296  1.84   tsutsui # Uncomment the fingerprint methods below that are desired. Note that
    297  1.84   tsutsui # removing fingerprint methods will have almost no impact on the kernel
    298  1.84   tsutsui # code size.
    299  1.84   tsutsui #
    300  1.84   tsutsui #options VERIFIED_EXEC_FP_RMD160
    301  1.84   tsutsui #options VERIFIED_EXEC_FP_SHA256
    302  1.84   tsutsui #options VERIFIED_EXEC_FP_SHA384
    303  1.84   tsutsui #options VERIFIED_EXEC_FP_SHA512
    304  1.84   tsutsui #options VERIFIED_EXEC_FP_SHA1
    305  1.84   tsutsui #options VERIFIED_EXEC_FP_MD5
    306