GENERIC3X revision 1.141 1 # $NetBSD: GENERIC3X,v 1.141 2022/08/17 19:13:05 tsutsui Exp $
2
3 # GENERIC Sun3X (3/80, 3/470)
4 # Supports root on: ie0, le0, sd*, ...
5
6 include "arch/sun3/conf/std.sun3x"
7
8 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
9
10 #ident "GENERIC3X-$Revision: 1.141 $"
11
12 makeoptions COPTS="-Os -fno-unwind-tables -fno-omit-frame-pointer"
13 # Bootloader has size limit (~2MB). -fno-omit-frame-pointer is
14 # necessary for backtraces in DDB.
15
16 # Machines to be supported by this kernel
17 #options FPU_EMULATE # XXX - Ever needed?
18 #options HAVE_IOCACHE # XXX - Not yet supported.
19
20 # Needs to be set per system. i.e change these as you see fit
21 maxusers 4
22
23 # Standard system options
24 options KTRACE # system call tracing
25 options SYSVMSG # System V message queues
26 options SYSVSEM # System V semaphores
27 options SYSVSHM # System V shared memory
28
29 #options MODULAR # new style module(7) framework
30 #options MODULAR_DEFAULT_AUTOLOAD
31
32 #options INSECURE # disable kernel security level
33 #options USERCONF # userconf(4) support
34 options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
35 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
36
37 # Alternate buffer queue strategies for better responsiveness under high
38 # disk I/O load.
39 #options BUFQ_READPRIO
40 #options BUFQ_PRIOCSCAN
41
42 # Which kernel debugger? Uncomment either this:
43 options DDB
44 # ... or these for KGDB (gdb remote target)
45 #makeoptions DEBUG="-g" # debugging symbols for gdb
46 #options KGDB
47 #options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01
48
49 # Other debugging options
50 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB
51 #options DEBUG # kernel debugging code
52 #options DIAGNOSTIC # extra kernel sanity checking
53 #options PMAP_DEBUG
54 #options SCSIDEBUG
55 #options SCSIVERBOSE # Verbose SCSI errors
56
57 # Compatibility options
58 # Originally in NetBSD 1.0, but limited to 6.0 for size.
59 #include "conf/compat_netbsd10.config"
60 include "conf/compat_netbsd60.config"
61 #options COMPAT_AOUT_M68K # support for NetBSD a.out executables
62 #options COMPAT_LINUX # can run Linux/m68k executables
63 #options COMPAT_OSSAUDIO # can run Linux/m68k executables
64 #options EXEC_AOUT # support for a.out executables
65 #options COMPAT_SUNOS # can run SunOS 4.1.1 executables
66
67 # File systems
68 file-system FFS # Berkeley Fast Filesystem
69 file-system NFS # Sun NFS client support
70 file-system CD9660 # ISO 9660 + Rock Ridge file system
71 file-system MSDOSFS # MS-DOS FAT file system
72 #file-system FDESC # /dev/fd/*
73 #file-system KERNFS # /kern
74 file-system NULLFS # loopback file system
75 #file-system OVERLAY # overlay file system
76 file-system PROCFS # /proc
77 #file-system UNION # union file system
78 file-system MFS # memory-based filesystem
79 file-system PTYFS # /dev/pts/N support
80 # Disabled as 20KB larger than MFS.
81 #file-system TMPFS # Efficient memory file-system
82 #file-system UDF # experimental - OSTA UDF CD/DVD file-system
83
84 # File system options
85 #options FFS_EI # FFS Endian Independent support
86 options FFS_NO_SNAPSHOT # No FFS snapshot support
87 #options QUOTA # legacy UFS quotas
88 #options QUOTA2 # new, in-filesystem UFS quotas
89 #options UFS_DIRHASH # UFS Large Directory Hashing
90 #options UFS_EXTATTR # Extended attribute support for UFS1
91 #options WAPBL # File system journaling support
92 #options NFSSERVER # Network File System server
93
94 # Networking options
95 options INET # IP protocol stack support
96 #options INET6 # IPV6
97 #options IPSEC # IP security
98 #options IPSEC_DEBUG # debug for IP security
99 #options GATEWAY # IP packet forwarding
100 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
101
102 #options ALTQ # Manipulate network interfaces' output queues
103 #options ALTQ_BLUE # Stochastic Fair Blue
104 #options ALTQ_CBQ # Class-Based Queueing
105 #options ALTQ_CDNR # Diffserv Traffic Conditioner
106 #options ALTQ_FIFOQ # First-In First-Out Queue
107 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
108 #options ALTQ_HFSC # Hierarchical Fair Service Curve
109 #options ALTQ_LOCALQ # Local queueing discipline
110 #options ALTQ_PRIQ # Priority Queueing
111 #options ALTQ_RED # Random Early Detection
112 #options ALTQ_RIO # RED with IN/OUT
113 #options ALTQ_WFQ # Weighted Fair Queueing
114
115 # Work-around for root on slow servers (insurance...)
116 options NFS_BOOT_RWSIZE=1024
117 options NFS_BOOT_BOOTPARAM
118
119 config netbsd root on ? type ?
120
121 # On-board I/O space (required)
122 include "arch/sun3/conf/obio.sun3x"
123
124 # On-board memory (optional)
125 # See frame-buffers
126 obmem0 at mainbus?
127
128 # VME bus support (optional)
129 # One unit for each address space
130 vme0 at mainbus? # A16/D16
131 vme1 at mainbus? # A16/D32
132 vme2 at mainbus? # A24/D16
133 vme3 at mainbus? # A24/D32
134 vme4 at mainbus? # A32/D16
135 vme5 at mainbus? # A32/D32
136
137 #
138 # Serial ports
139 #
140 zstty0 at zsc1 channel 0 # ttya
141 zstty1 at zsc1 channel 1 # ttyb
142
143 kbd0 at zsc0 channel 0 # keyboard
144 ms0 at zsc0 channel 1 # mouse
145
146 #
147 # Network devices
148 #
149
150 # Intel Ethernet (onboard, or VME)
151 ie0 at obio0 addr 0x65000000 ipl 3
152 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
153
154 # Lance Ethernet (only onboard)
155 le0 at obio0 addr 0x65002000 ipl 3
156
157 #
158 # Disk and tape devices
159 #
160
161 # Emulex SCSI (3/80 only)
162 # Both `dma' and `esp' are needed.
163 # The following flags may be set for the NCR53c94 based esp driver:
164 # bits 0-7: disable disconnect/reselect for the corresponding target
165 # bits 8-15: disable synchronous negotiation for target [bit-8]
166 #
167 dma0 at obio0 addr 0x66001000 ipl 2
168 esp0 at obio0 addr 0x66000000 ipl 2 flags 0x000000
169
170 # Floppy drive
171 fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40
172 fd0 at fdc0 # First (and only) floppy drive.
173
174 # Sun3 "si" SCSI controller (NCR 5380)
175 # This driver has several flags which may be enabled using
176 # the "flags" directive. Valid flags are:
177 #
178 # 0x000ff Set (1<<target) to disable disconnect/reselect
179 # 0x0ff00 Set (1<<(target+8)) to disable parity checking
180 # 0x10000 Set this bit to disable DMA interrupts (poll)
181 # 0x20000 Set this bit to disable DMA entirely (use PIO)
182 #
183 # For example: "flags 0x1000f" would disable DMA interrupts,
184 # and disable disconnect/reselect for targets 0-3
185 si0 at vme2 addr 0x200000 ipl 2 vect 0x40
186 si1 at vme2 addr 0x204000 ipl 2 vect 0x41
187
188 # Xylogics 450/451 controllers (VME A16/D16)
189 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
190 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
191 xy* at xyc? drive ?
192
193 # Xylogics 7053 controllers (VME A16/D32)
194 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
195 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
196 xd* at xdc? drive ?
197
198 # Xylogics 472 tape controllers?
199
200 #
201 # Frame buffer devices
202 #
203
204 # P4 Monochrome frame buffer.
205 bwtwo0 at obmem0 addr 0x50300000
206 # The bw2 driver can also run on a cg4 overlay plane,
207 # and the 0x40 flag means "CG overlay plane" mode.
208 # The low 4 bits of the flags (if set) are matched
209 # against the same bits of the machine type ID code.
210 bwtwo0 at obmem0 addr 0x50300000 flags 0x42 # 3/80 (P4 cgfour overlay)
211
212 # P4 8-bit color frame buffer
213 cgfour0 at obmem0 addr 0x50300000
214
215 # P4 accelerated 8-bit color frame buffer
216 # cgsix0 at obmem0 addr 0x50000000
217
218 # P4 24-bit color frame buffer
219 # cgeight0 at obmem0 addr 0x50300000
220
221 # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
222 # This driver is going to need work in its mmap function.
223 # cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
224
225 # Support for the CG9 24-bit frame buffer (VME A32/D32).
226 # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
227
228 #
229 # SCSI infrastructure
230 #
231 scsibus* at scsi?
232
233 sd* at scsibus? target ? lun ? # SCSI disks
234 st* at scsibus? target ? lun ? # SCSI tapes
235 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
236 #ch* at scsibus? target ? lun ? # SCSI changer devices
237 #ss* at scsibus? target ? lun ? # SCSI scanners
238 uk* at scsibus? target ? lun ? # unknown SCSI devices
239
240 #
241 # accept filters
242 #pseudo-device accf_data # "dataready" accept filter
243 #pseudo-device accf_http # "httpready" accept filter
244
245 # Memory-disk drivers
246 pseudo-device md
247
248 # Misc.
249 pseudo-device loop # network loopback
250 pseudo-device bpfilter # packet filter
251 #pseudo-device carp # Common Address Redundancy Protocol
252 pseudo-device sl # CSLIP
253 pseudo-device ppp # PPP
254 #pseudo-device pppoe # PPP over Ethernet (RFC 2516)
255 #pseudo-device tun # network tunneling over tty
256 #pseudo-device tap # virtual Ethernet
257 #pseudo-device gre # generic L3 over IP tunnel
258 #pseudo-device npf # NPF packet filter
259 #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
260 #pseudo-device faith # IPv[46] tcp relay translation i/f
261 #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
262 pseudo-device vlan # IEEE 802.1q encapsulation
263 #pseudo-device bridge # simple inter-network bridging
264 #pseudo-device vether # Virtual Ethernet for bridge
265 #pseudo-device agr # IEEE 802.3ad link aggregation
266
267 pseudo-device pty # pseudo-terminals
268 pseudo-device vnd # paging to files
269 #options VND_COMPRESSION # compressed vnd(4)
270 #pseudo-device ccd # concatenated disks
271 #pseudo-device cgd # cryptographic disk devices
272 #pseudo-device raid # RAIDframe disk driver
273 #options RAID_AUTOCONFIG # auto-configuration of RAID components
274 # Options to enable various other RAIDframe RAID types.
275 #options RF_INCLUDE_EVENODD=1
276 #options RF_INCLUDE_RAID5_RS=1
277 #options RF_INCLUDE_PARITYLOGGING=1
278 #options RF_INCLUDE_CHAINDECLUSTER=1
279 #options RF_INCLUDE_INTERDECLUSTER=1
280 #options RF_INCLUDE_PARITY_DECLUSTERING=1
281 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
282 #pseudo-device fss # file system snapshot device
283 pseudo-device clockctl # user control of clock subsystem
284 pseudo-device ksyms # /dev/ksyms
285
286 # Veriexec
287 # include "dev/veriexec.config"
288