Home | History | Annotate | Line # | Download | only in conf
GENERIC3X revision 1.26
      1 # $NetBSD: GENERIC3X,v 1.26 1999/07/29 10:37:25 augustss Exp $
      2 
      3 # GENERIC Sun3X (3/80, 3/470)
      4 # Supports root on: ie0, le0, sd*, ...
      5 
      6 include "arch/sun3/conf/std.sun3x"
      7 
      8 # Machines to be supported by this kernel
      9 # options 	FPU_EMULATE	# XXX - Ever needed?
     10 # options 	HAVE_IOCACHE	# XXX - Not yet supported.
     11 
     12 # Needs to be set per system.  i.e change these as you see fit
     13 maxusers	4
     14 
     15 # Standard system options
     16 options 	KTRACE		# system call tracing
     17 options 	SYSVMSG		# System V message queues
     18 options 	SYSVSEM		# System V semaphores
     19 options 	SYSVSHM		# System V shared memory
     20 #options 	SHMMAXPGS=1024	# 1024 pages is the default
     21 options 	LKM		# loadable kernel modules
     22 #options 	INSECURE	# disable kernel security level
     23 #options 	UCONSOLE	# Allow non-root TIOCCONS
     24 
     25 # Which kernel debugger?  Uncomment either this:
     26 options 	DDB
     27 # ... or these for KGDB (gdb remote target)
     28 #makeoptions DEBUG="-g"		# debugging symbols for gdb
     29 #options 	KGDB
     30 #options 	KGDBDEV=0x0C01	# ttya=0C00 ttyb=0C01
     31 
     32 # Other debugging options
     33 #options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
     34 #options 	DEBUG		# kernel debugging code
     35 #options 	DIAGNOSTIC	# extra kernel sanity checking
     36 #options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
     37 #options 	PMAP_DEBUG
     38 #options 	SCSIDEBUG
     39 #options 	SCSIVERBOSE		# Verbose SCSI errors
     40 
     41 # Compatability options
     42 options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
     43 #options 	COMPAT_SVR4	# can run SVR4 executables
     44 options 	COMPAT_43	# and 4.3BSD and ...
     45 options 	COMPAT_10	# NetBSD 1.0
     46 options 	COMPAT_11	# NetBSD 1.1
     47 options 	COMPAT_12	# NetBSD 1.2
     48 options 	COMPAT_13	# NetBSD 1.3
     49 options 	COMPAT_14	# NetBSD 1.4
     50 #options 	COMPAT_LINUX	# can run Linux/m68k executables
     51 #options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
     52 
     53 # Filesystem options
     54 file-system	FFS		# Berkeley Fast Filesystem
     55 file-system	NFS		# Sun NFS client support
     56 file-system	CD9660		# ISO 9660 + Rock Ridge file system
     57 file-system	MSDOSFS		# MS-DOS FAT file system
     58 file-system	FDESC		# /dev/fd/*
     59 file-system	KERNFS		# /kern
     60 file-system	NULLFS		# loopback file system
     61 file-system	PROCFS		# /proc
     62 file-system	UNION		# union file system
     63 file-system	MFS		# memory-based filesystem
     64 
     65 options 	NFSSERVER	# nfs server support
     66 options 	QUOTA		# FFS quotas
     67 #options 	FFS_EI		# FFS Endian Independant support
     68 
     69 # Networking options
     70 options 	INET		# IP prototol stack support
     71 options 	TCP_COMPAT_42	# compatibility with 4.2BSD TCP/IP
     72 #options 	GATEWAY		# IP packet forwarding
     73 #options 	ISO,TPIP	# OSI networking
     74 #options 	EON		# OSI tunneling over IP
     75 #options 	CCITT,LLC,HDLC	# X.25
     76 #options 	PFIL_HOOKS	# pfil(9) packet filter hooks.
     77 
     78 # Work-around for root on slow servers (insurance...)
     79 options 	NFS_BOOT_RWSIZE=1024
     80 options 	NFS_BOOT_BOOTPARAM
     81 
     82 config		netbsd root on ? type ?
     83 
     84 # On-board I/O space (required)
     85 include "arch/sun3/conf/obio.sun3x"
     86 
     87 # On-board memory (optional)
     88 # See frame-buffers
     89 obmem0 at mainbus?
     90 
     91 # VME bus support (optional)
     92 # One unit for each address space
     93 vme0 at mainbus? # A16/D16
     94 vme1 at mainbus? # A16/D32
     95 vme2 at mainbus? # A24/D16
     96 vme3 at mainbus? # A24/D32
     97 vme4 at mainbus? # A32/D16
     98 vme5 at mainbus? # A32/D32
     99 
    100 #
    101 # Serial ports
    102 #
    103 zstty0	at zsc1 channel 0	# ttya
    104 zstty1	at zsc1 channel 1	# ttyb
    105 
    106 kbd0	at zsc0 channel 0	# keyboard
    107 ms0	at zsc0 channel 1	# mouse
    108 
    109 #
    110 # Network devices
    111 #
    112 
    113 # Intel Ethernet (onboard, or VME)
    114 ie0 at obio0 addr 0x65000000 ipl 3
    115 ie1 at vme2  addr   0xe88000 ipl 3 vect 0x75
    116 
    117 # Lance Ethernet (only onboard)
    118 le0 at obio0 addr 0x65002000 ipl 3
    119 
    120 #
    121 # Disk and tape devices
    122 #
    123 
    124 # Emulex SCSI (3/80 only)
    125 # Both `dma' and `esp' are needed.
    126 # The following flags may be set for the NCR53c94 based esp driver:
    127 #	bits 0-7:  disable disconnect/reselect for the corresponding target
    128 #	bits 8-15: disable synchronous negotiation for target [bit-8]
    129 #
    130 dma0 at obio0 addr 0x66001000 ipl 2
    131 esp0 at obio0 addr 0x66000000 ipl 2 flags 0xff0f
    132 
    133 # Floppy drive
    134 fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40
    135 fd0  at fdc0	# First (and only) floppy drive.
    136 
    137 # Sun3 "si" SCSI controller (NCR 5380)
    138 # This driver has several flags which may be enabled using
    139 # the "flags" directive.  Valid flags are:
    140 #
    141 # 0x000ff	Set (1<<target) to disable disconnect/reselect
    142 # 0x0ff00	Set (1<<(target+8)) to disable parity checking
    143 # 0x10000	Set this bit to disable DMA interrupts (poll)
    144 # 0x20000	Set this bit to disable DMA entirely (use PIO)
    145 #
    146 # For example: "flags 0x1000f" would disable DMA interrupts,
    147 # and disable disconnect/reselect for targets 0-3
    148 si0 at vme2  addr 0x200000 ipl 2 vect 0x40
    149 si1 at vme2  addr 0x204000 ipl 2 vect 0x41
    150 
    151 # Xylogics 450/451 controllers (VME A16/D16)
    152 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
    153 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
    154 xy* at xyc? drive ?
    155 
    156 # Xylogics 7053 controllers (VME A16/D32)
    157 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
    158 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
    159 xd* at xdc? drive ?
    160 
    161 # Xylogics 472 tape controllers?
    162 
    163 #
    164 # Frame buffer devices
    165 #
    166 
    167 # P4 Monochrome frame buffer.
    168 bwtwo0  at obmem0 addr 0x50300000
    169 
    170 # P4 8-bit color frame buffer
    171 cgfour0 at obmem0 addr 0x50300000
    172 
    173 # P4 accelerated 8-bit color frame buffer
    174 # cgsix0 at obmem0 addr 0x50000000
    175 
    176 # P4 24-bit color frame buffer
    177 # cgeight0 at obmem0 addr 0x50300000
    178 
    179 # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
    180 # This driver is going to need work in its mmap function.
    181 # cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
    182 
    183 # Support for the CG9 24-bit frame buffer (VME A32/D32).
    184 # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
    185 
    186 #
    187 # SCSI infrastructure
    188 #
    189 scsibus* at scsi?
    190 
    191 sd* at scsibus? target ? lun ?		# SCSI disks
    192 st* at scsibus? target ? lun ?		# SCSI tapes
    193 cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
    194 ch* at scsibus? target ? lun ?		# SCSI changer devices
    195 ss* at scsibus? target ? lun ?		# SCSI scanners
    196 uk* at scsibus? target ? lun ?		# unknown SCSI devices
    197 
    198 # Memory-disk drivers
    199 pseudo-device	md		2
    200 
    201 # Misc.
    202 pseudo-device	loop		1	# network loopback
    203 pseudo-device	bpfilter	8	# packet filter
    204 pseudo-device	sl		2	# CSLIP
    205 pseudo-device	ppp		2	# PPP
    206 pseudo-device	tun		2	# network tunneling over tty
    207 #pseudo-device	gre		2	# generic L3 over IP tunnel
    208 #pseudo-device	ipfilter		# ip filter
    209 # rnd is EXPERIMENTAL
    210 #pseudo-device	rnd			# /dev/random and in-kernel generator
    211 
    212 pseudo-device	pty		32	# pseudo-terminals
    213 #pseudo-device	vnd		4	# paging to files
    214 #pseudo-device	ccd		4	# concatenated disks
    215 #pseudo-device	raid		4	# RAIDframe disk driver
    216