INSTALL revision 1.62
1# $NetBSD: INSTALL,v 1.62 2020/06/19 10:35:11 tsutsui Exp $
2#
3# INSTALL - Installation kernel for the Sun3
4#
5# This kernel is derived from GENERIC with some features commented out.
6#
7# This kernel does NOT support X, mice, non-NetBSD emulation, etc.
8#
9
10include "arch/sun3/conf/std.sun3"
11
12#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
13
14makeoptions	COPTS="-Os -fno-unwind-tables"	# Optimise for space. Implies -O2
15
16# Machines to be supported by this kernel
17options 	FPU_EMULATE
18options 	HAVECACHE	# Sun3/260 VAC
19
20# Needs to be set per system.  i.e change these as you see fit
21maxusers	2
22
23# Standard system options
24#options 	KTRACE		# system call tracing
25#options 	SYSVMSG		# System V message queues
26#options 	SYSVSEM		# System V semaphores
27#options 	SYSVSHM		# System V shared memory
28#options 	INSECURE	# disable kernel security level
29options 	USERCONF	# userconf(4) support
30options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
31#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
32
33# Which kernel debugger?  Uncomment either this:
34#options 	DDB
35# ... or these for KGDB (gdb remote target)
36#makeoptions	DEBUG="-g"	# debugging symbols for gdb
37#options 	KGDB
38#options 	KGDB_DEV=0x0C01	# ttya=0C00 ttyb=0C01
39
40# Other debugging options
41#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
42#options 	DEBUG		# kernel debugging code
43#options 	DIAGNOSTIC	# extra kernel sanity checking
44#options 	PMAP_DEBUG
45#options 	SCSIDEBUG
46#options 	SCSIVERBOSE		# Verbose SCSI errors
47
48# Compatibility options
49include 	"conf/compat_netbsd13.config"
50#options 	COMPAT_LINUX	# can run Linux/m68k executables
51
52# File systems
53file-system	FFS		# Berkeley Fast Filesystem
54file-system	NFS		# Sun NFS client support
55file-system	CD9660		# ISO 9660 + Rock Ridge file system
56#file-system	FDESC		# /dev/fd/*
57file-system	KERNFS		# /kern
58#file-system	NULLFS		# loopback file system
59#file-system	PROCFS		# /proc
60#file-system	UNION		# union file system
61#file-system	MFS		# memory-based filesystem
62#file-system	PTYFS		# /dev/pts/N support
63
64# Filesystem options
65#options 	NFSSERVER	# nfs server support
66#options 	QUOTA		# legacy UFS quotas
67#options 	QUOTA2		# new, in-filesystem UFS quotas
68#options 	FFS_EI		# FFS Endian Independent support
69#options 	NFS_V2_ONLY	# Exclude NFS3 code to save space
70options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
71options 	WAPBL		# File system journaling support
72
73# Networking options
74options 	INET		# IP protocol stack support
75#options 	GATEWAY		# IP packet forwarding
76#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
77
78# Work-around for root on slow servers (insurance...)
79options 	NFS_BOOT_RWSIZE=1024
80options 	NFS_BOOT_BOOTPARAM
81
82config		netbsd root on ? type ?
83
84# On-board I/O space (required)
85include "arch/sun3/conf/obio.sun3"
86
87# On-board memory (optional)
88# See frame-buffers
89# obmem0 at mainbus?
90
91# VME bus support (optional)
92# One unit for each address space
93vme0 at mainbus? # A16/D16
94vme1 at mainbus? # A16/D32
95vme2 at mainbus? # A24/D16
96vme3 at mainbus? # A24/D32
97vme4 at mainbus? # A32/D16
98vme5 at mainbus? # A32/D32
99
100#
101# Serial ports
102#
103zstty0	at zsc1 channel 0	# ttya
104zstty1	at zsc1 channel 1	# ttyb
105
106kbd0	at zsc0 channel 0	# keyboard
107#ms0	at zsc0 channel 1	# mouse
108
109#
110# Network devices
111#
112
113# Intel Ethernet (onboard, or VME)
114ie0 at obio0 addr 0x0C0000 ipl 3
115ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
116
117# Lance Ethernet (only onboard)
118le0 at obio0 addr 0x120000 ipl 3
119
120# All Sun3 machines with an "le" (3/50, 3/60) should be
121# presumed to have the old, buggy LANCE chip. (Rev. C)
122options 	LANCE_REVC_BUG
123
124#
125# Disk and tape devices
126#
127
128# Sun3 "si" SCSI controller (NCR 5380)
129# See GENERIC for the flags description.
130si0 at obio0 addr 0x140000 ipl 2
131si0 at vme2 addr 0x200000 ipl 2 vect 0x40
132si1 at vme2 addr 0x204000 ipl 2 vect 0x41
133
134# Xylogics 450/451 controllers (VME A16/D16)
135xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
136xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
137xy* at xyc? drive ?
138
139# Xylogics 7053 controllers (VME A16/D32)
140xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
141xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
142xd* at xdc? drive ?
143
144# Xylogics 472 tape controllers?
145
146# Sun3/E SCSI+Ethernet board (VME A24/D16)
147# Note: the board uses vect and vect+1
148sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
149sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
150si* at sebuf?
151ie* at sebuf?
152
153#
154# Frame buffer devices
155# (Not needed for installation kernels.)
156
157#
158# SCSI infrastructure
159#
160scsibus* at scsi?
161
162sd* at scsibus? target ? lun ?		# SCSI disks
163st* at scsibus? target ? lun ?		# SCSI tapes
164cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
165#ch* at scsibus? target ? lun ?		# SCSI changer devices
166#ss* at scsibus? target ? lun ?		# SCSI scanners
167#uk* at scsibus? target ? lun ?		# unknown SCSI devices
168
169# Memory-disk drivers
170#pseudo-device	md		
171
172# Misc.
173pseudo-device	loop			# network loopback
174#pseudo-device	bpfilter		# packet filter
175pseudo-device	sl			# CSLIP
176pseudo-device	ppp			# PPP
177pseudo-device	tun			# network tunneling over tty
178#pseudo-device	gre			# generic L3 over IP tunnel
179#pseudo-device	npf			# NPF packet filter
180
181pseudo-device	pty			# pseudo-terminals
182#pseudo-device	vnd			# paging to files
183#pseudo-device	ccd			# concatenated disks
184#pseudo-device	fss			# file system snapshot device
185