KGDB3X revision 1.13 1 # $NetBSD: KGDB3X,v 1.13 1997/10/17 02:55:40 gwr Exp $
2
3 # GENERIC Sun3x (3/80, 3/470)
4 # Supports root on: le0, sd*
5
6 include "arch/sun3x/conf/std.sun3x"
7
8 # Machines to be supported by this kernel
9 # options FPU_EMULATE # XXX - Ever needed?
10
11 # Needs to be set per system. i.e change these as you see fit
12 maxusers 4
13
14 # Standard system options
15 options KTRACE # system call tracing
16 options SYSVMSG # System V message queues
17 options SYSVSEM # System V semaphores
18 options SYSVSHM # System V shared memory
19 #options SHMMAXPGS=1024 # 1024 pages is the default
20 #options LKM # loadable kernel modules
21 #options INSECURE # disable kernel security level
22 #options UCONSOLE # Allow non-root TIOCCONS
23
24 # Which kernel debugger? Uncomment either this:
25 options DDB
26 # ... or these for KGDB (gdb remote target)
27 #makeoptions DEBUG="-g" # debugging symbols for gdb
28 #options KGDB
29 #options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01
30
31 # Other debugging options
32 #options DEBUG # kernel debugging code
33 #options DIAGNOSTIC # extra kernel sanity checking
34 #options KMEMSTATS # kernel memory statistics (vmstat -m)
35 #options PMAP_DEBUG
36 #options SCSIDEBUG
37 #options SCSIVERBOSE # Verbose SCSI errors
38
39 # Compatability options
40 options COMPAT_SUNOS # can run SunOS 4.1.1 executables
41 options COMPAT_43 # and 4.3BSD and ...
42 options COMPAT_10 # NetBSD 1.0
43 options COMPAT_11 # NetBSD 1.1
44 options COMPAT_12 # NetBSD 1.2
45
46 # Filesystem options
47 file-system FFS # Berkeley Fast Filesystem
48 file-system NFS # Sun NFS client support
49 file-system CD9660 # ISO 9660 + Rock Ridge file system
50 file-system MSDOSFS # MS-DOS FAT file system
51 file-system FDESC # /dev/fd/*
52 file-system KERNFS # /kern
53 file-system NULLFS # loopback file system
54 file-system PROCFS # /proc
55 file-system UNION # union file system
56 file-system MFS # memory-based filesystem
57
58 options FIFO # FIFOs; RECOMMENDED
59 options NFSSERVER # nfs server support
60 options QUOTA # FFS quotas
61
62 # Networking options
63 options INET # IP prototol stack support
64 options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
65 #options GATEWAY # IP packet forwarding
66 #options ISO,TPIP # OSI networking
67 #options EON # OSI tunneling over IP
68 #options CCITT,LLC,HDLC # X.25
69 #options PFIL_HOOKS # pfil(9) packet filter hooks.
70
71 # Work-around for root on slow servers (insurance...)
72 options NFS_BOOT_RWSIZE=1024
73
74 config netbsd root on ? type ?
75
76 #
77 # Serial ports
78 #
79 zstty0 at zsc1 channel 0 # ttya
80 zstty1 at zsc1 channel 1 # ttyb
81
82 kbd0 at zsc0 channel 0 # keyboard
83 ms0 at zsc0 channel 1 # mouse
84
85 #
86 # Network devices
87 #
88
89 # Intel Ethernet
90 ie0 at obio0 addr 0x65000000 ipl 3
91 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
92
93 # Lance Ethernet (only onboard)
94 le0 at obio0 addr 0x65002000 ipl 3
95
96 #
97 # Disk and tape devices
98 #
99
100 # Emulex SCSI (3/80 only)
101 # Note the flags on the esp entries below, that work around
102 # deficiencies in the current driver:
103 # bits 0-7: disable disconnect/reselect for the corresponding target
104 # bits 8-15: disable synch negotiation for target [bit-8]
105 # Note: targets 4-7 have disconnect/reselect enabled on the premise
106 # that tape devices normally have one of these targets. Tape
107 # devices should be allowed to disconnect for the SCSI bus
108 # to operate acceptably.
109 #
110 esp0 at obio0 addr 0x66000000 ipl 2 flags 0xff0f
111
112 # Floppy drive
113 fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40
114 fd0 at fdc0 # First (and only) floppy drive.
115
116 # Sun3 "si" SCSI controller (NCR 5380)
117 # This driver has several flags which may be enabled using
118 # the "flags" directive. Valid flags are:
119 #
120 # 0x000ff Set (1<<target) to disable disconnect/reselect
121 # 0x0ff00 Set (1<<(target+8)) to disable parity checking
122 # 0x10000 Set this bit to disable DMA interrupts (poll)
123 # 0x20000 Set this bit to disable DMA entirely (use PIO)
124 #
125 # For example: "flags 0x1000f" would disable DMA interrupts,
126 # and disable disconnect/reselect for targets 0-3
127 # XXX: Disable DMA entirely until it is debugged.
128 si0 at vme2 addr 0x200000 ipl 2 vect 0x40 flags 0x300ff
129 si1 at vme2 addr 0x204000 ipl 2 vect 0x41 flags 0x300ff
130
131 #
132 # Frame buffer devices
133 #
134
135 # bwtwo - Monochrome frame buffer.
136 bwtwo0 at obmem0 addr 0x50400000 ipl 4
137
138 #
139 # SCSI infrastructure
140 #
141 scsibus* at scsi?
142
143 sd* at scsibus? target ? lun ? # SCSI disks
144 st* at scsibus? target ? lun ? # SCSI tapes
145 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
146 ch* at scsibus? target ? lun ? # SCSI changer devices
147 ss* at scsibus? target ? lun ? # SCSI scanners
148 uk* at scsibus? target ? lun ? # unknown SCSI devices
149
150 # Memory-disk drivers
151 pseudo-device md 2
152
153 # Misc.
154 pseudo-device loop 1 # network loopback
155 pseudo-device bpfilter 8 # packet filter
156 pseudo-device sl 2 # CSLIP
157 pseudo-device ppp 2 # PPP
158 pseudo-device tun 2 # network tunneling over tty
159 #pseudo-device ipfilter # ip filter
160
161 pseudo-device pty 64 # pseudo-terminals
162 #pseudo-device vnd 4 # paging to files
163 #pseudo-device ccd 4 # concatenated disks
164