KGDB3X revision 1.9 1 # $NetBSD: KGDB3X,v 1.9 1997/08/23 19:19:22 mjacob Exp $
2 #
3 # GENERIC Sun3x (3/80, 3/470)
4 # Supports root on: le0, sd*
5 #
6
7 include "arch/sun3x/conf/std.sun3x"
8
9 # Machines to be supported by this kernel
10 # options FPU_EMULATE # XXX - Ever needed?
11
12 # Needs to be set per system. i.e change these as you see fit
13 maxusers 4
14
15 # Standard system options
16 options KTRACE # system call tracing support
17
18 # Debugging options. Uncomment either these:
19 options DDB
20 #options SYMTAB_SPACE=0x1C000
21 # ... or these for KGDB (gdb remote target)
22 #makeoptions DEBUG="-g" # debugging symbols for gdb
23 #options KGDB
24 #options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01
25 #options SCSIVERBOSE # Verbose SCSI errors
26
27 # Filesystem options
28 file-system FFS # ufs file system
29 file-system NFS # nfs client support
30 file-system CD9660 # ISO 9660 + Rock Ridge file system
31 file-system MSDOSFS # MS-DOS FAT file system
32 file-system FDESC # /dev/fd/*
33 file-system KERNFS # /kern
34 file-system NULLFS # loopback file system
35 file-system PROCFS # /proc
36 file-system UNION # union file system
37 file-system MFS # memory-based filesystem
38
39 options NFSSERVER # nfs server support
40 options FIFO # FIFOs; RECOMMENDED
41
42 # Networking options
43 options INET # IP prototol stack support
44 #options GATEWAY # IP packet forwarding
45 options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
46 # XXX - Work-around for root on slow servers (insurance...)
47 options NFS_BOOT_RWSIZE=1024
48
49 # Compatability options
50 options COMPAT_SUNOS # can run SunOS 4.1.1 executables
51 options COMPAT_43 # and 4.3BSD and ...
52 options COMPAT_12 # NetBSD 1.2
53 options UCONSOLE # Allow non-root TIOCCONS
54
55 # Sun3x-specific debugging options
56 #options PMAP_DEBUG
57 #options VMFAULT_TRACE
58 #options SYSCALL_DEBUG
59 #options EXEC_DEBUG
60 #options DIAGNOSTIC
61 #options SCSIDEBUG
62
63 config netbsd root on ? type ?
64
65 #
66 # Serial ports
67 #
68 zstty0 at zsc1 channel 0 # ttya
69 zstty1 at zsc1 channel 1 # ttyb
70
71 kbd0 at zsc0 channel 0 # keyboard
72 ms0 at zsc0 channel 1 # mouse
73
74 #
75 # Network devices
76 #
77
78 # Lance Ethernet (only onboard)
79 le0 at obio0 addr 0x65002000 ipl 3
80
81 #
82 # Disk and tape devices
83 #
84
85 # Note the flags on the esp entries below, that work around
86 # deficiencies in the current driver:
87 # bits 0-7: disable disconnect/reselect for the corresponding target
88 # bits 8-15: disable synch negotiation for target [bit-8]
89 # Note: targets 4-7 have disconnect/reselect enabled on the premise
90 # that tape devices normally have one of these targets. Tape
91 # devices should be allowed to disconnect for the SCSI bus
92 # to operate acceptably.
93 #
94 # Emulex SCSI (3/80 only)
95 esp0 at obio0 addr 0x66000000 ipl 2 flags 0xff0f
96
97 # Floppy drive
98 fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40
99 fd0 at fdc0 # First (and only) floppy drive.
100
101 #
102 # Frame buffer devices
103 #
104
105 # bwtwo - Monochrome frame buffer.
106 bwtwo0 at obmem0 addr 0x50400000 ipl 4
107
108 #
109 # SCSI infrastructure
110 #
111 scsibus* at scsi?
112
113 sd* at scsibus? target ? lun ? # SCSI disks
114 st* at scsibus? target ? lun ? # SCSI tapes
115 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
116 ch* at scsibus? target ? lun ? # SCSI changer devices
117 ss* at scsibus? target ? lun ? # SCSI scanners
118 uk* at scsibus? target ? lun ? # unknown SCSI devices
119
120 # Memory-disk drivers
121 pseudo-device md 2
122
123 # Misc.
124 pseudo-device loop 1 # network loopback
125 pseudo-device bpfilter 8 # packet filter
126 pseudo-device sl 2 # CSLIP
127 pseudo-device ppp 2 # PPP
128 pseudo-device tun 2 # network tunneling over tty
129 #pseudo-device ipfilter # ip filter
130
131 pseudo-device pty 64 # pseudo-terminals
132 #pseudo-device vnd 4 # paging to files
133 #pseudo-device ccd 4 # concatenated disks
134