RAMDISK3X revision 1.13
1 # $NetBSD: RAMDISK3X,v 1.13 2001/07/08 16:32:25 abs Exp $ 2 3 # RAMDISK: Root/swap on ramdisk 4 # This kernel is used to: 5 # format the disk (not yet implemented) 6 # partition the disk (disklabel) 7 # install the miniroot in the swap partition 8 9 include "arch/sun3/conf/std.sun3x" 10 11 # Machines to be supported by this kernel 12 # options FPU_EMULATE # XXX - Ever needed? 13 # options HAVE_IOCACHE # XXX - Not yet supported. 14 15 # Needs to be set per system. i.e change these as you see fit 16 maxusers 2 17 18 # Standard system options 19 # ... debugging options 20 #options DDB 21 # Compatibility options (none) 22 23 # Filesystem options 24 # Need FFS for the ramdisk image. 25 file-system FFS # Berkeley Fast Filesystem 26 # May need these to get miniroot image. 27 file-system NFS # Sun NFS client support 28 file-system CD9660 # ISO 9660 + Rock Ridge file system 29 30 # Networking options 31 options INET # IP prototol stack support 32 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 33 34 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 35 36 # Enable the hooks used for initializing the root memory-disk. 37 options MEMORY_DISK_HOOKS 38 options MEMORY_DISK_IS_ROOT # force root on memory disk 39 options MEMORY_DISK_SERVER=0 # no userspace memory disk support 40 options MINIROOTSIZE=800 # size of memory disk, in blocks 41 42 config netbsd root on ? type ffs 43 44 # On-board I/O space (required) 45 include "arch/sun3/conf/obio.sun3x" 46 47 # On-board memory (optional) 48 # See frame-buffers 49 # obmem0 at mainbus? 50 51 # VME bus support (optional) 52 # One unit for each address space 53 vme0 at mainbus? # A16/D16 54 vme1 at mainbus? # A16/D32 55 vme2 at mainbus? # A24/D16 56 vme3 at mainbus? # A24/D32 57 vme4 at mainbus? # A32/D16 58 vme5 at mainbus? # A32/D32 59 60 # 61 # Serial ports 62 # 63 zstty0 at zsc1 channel 0 # ttya 64 zstty1 at zsc1 channel 1 # ttyb 65 66 kbd0 at zsc0 channel 0 # keyboard 67 #ms0 at zsc0 channel 1 # mouse 68 69 # 70 # Network devices 71 # 72 73 # Intel Ethernet (onboard, or VME) 74 ie0 at obio0 addr 0x65000000 ipl 3 75 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 76 77 # Lance Ethernet (only onboard) 78 le0 at obio0 addr 0x65002000 ipl 3 79 80 # 81 # Disk and tape devices 82 # 83 84 # Emulex SCSI (3/80 only) 85 # Both `dma' and `esp' are needed. 86 # See GENERIC3X for the flags description. 87 dma0 at obio0 addr 0x66001000 ipl 2 88 esp0 at obio0 addr 0x66000000 ipl 2 flags 0xff0f 89 90 # Floppy drive 91 fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40 92 fd0 at fdc0 # First (and only) floppy drive. 93 94 # Sun3 "si" SCSI controller (NCR 5380) 95 # See GENERIC3X for the flags description. 96 si0 at vme2 addr 0x200000 ipl 2 vect 0x40 97 si1 at vme2 addr 0x204000 ipl 2 vect 0x41 98 99 # Xylogics 450/451 controllers (VME A16/D16) 100 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 101 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 102 xy* at xyc? drive ? 103 104 # Xylogics 7053 controllers (VME A16/D32) 105 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 106 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 107 xd* at xdc? drive ? 108 109 # Xylogics 472 tape controllers? 110 111 # 112 # Frame buffer devices 113 # (Not needed for installation kernels.) 114 115 # 116 # SCSI infrastructure 117 # 118 scsibus* at scsi? 119 120 sd* at scsibus? target ? lun ? # SCSI disks 121 st* at scsibus? target ? lun ? # SCSI tapes 122 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 123 #ch* at scsibus? target ? lun ? # SCSI changer devices 124 #ss* at scsibus? target ? lun ? # SCSI scanners 125 #uk* at scsibus? target ? lun ? # unknown SCSI devices 126 127 # Memory-disk drivers (root for install tape) 128 pseudo-device md 2 129 130 # Misc. 131 pseudo-device loop 1 # network loopback 132 pseudo-device sl 2 # CSLIP 133
Indexes created Wed Oct 01 07:09:59 GMT 2025