RAMDISK3X revision 1.24 1 # $NetBSD: RAMDISK3X,v 1.24 2004/07/15 03:53:52 atatat Exp $
2
3 # RAMDISK: Root/swap on ramdisk
4 # This kernel is used to:
5 # format the disk (not yet implemented)
6 # partition the disk (disklabel)
7 # install the miniroot in the swap partition
8
9 include "arch/sun3/conf/std.sun3x"
10
11 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
12
13 # Machines to be supported by this kernel
14 # options FPU_EMULATE # XXX - Ever needed?
15 # options HAVE_IOCACHE # XXX - Not yet supported.
16
17 # Needs to be set per system. i.e change these as you see fit
18 maxusers 2
19
20 # Standard system options
21 # ... debugging options
22 #options DDB
23 # Compatibility options (none)
24
25 # Filesystem options
26 # Need FFS for the ramdisk image.
27 file-system FFS # Berkeley Fast Filesystem
28 # May need these to get miniroot image.
29 file-system NFS # Sun NFS client support
30 file-system CD9660 # ISO 9660 + Rock Ridge file system
31
32 # Networking options
33 options INET # IP prototol stack support
34 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
35
36 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
37
38 # Enable the hooks used for initializing the root memory-disk.
39 options MEMORY_DISK_HOOKS
40 options MEMORY_DISK_IS_ROOT # force root on memory disk
41 options MEMORY_DISK_SERVER=0 # no userspace memory disk support
42 options MEMORY_DISK_ROOT_SIZE=1000 # size of memory disk, in blocks
43
44 options USERCONF # userconf(4) support
45 options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
46 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
47
48 config netbsd root on ? type ffs
49
50 # On-board I/O space (required)
51 include "arch/sun3/conf/obio.sun3x"
52
53 # On-board memory (optional)
54 # See frame-buffers
55 # obmem0 at mainbus?
56
57 # VME bus support (optional)
58 # One unit for each address space
59 vme0 at mainbus? # A16/D16
60 vme1 at mainbus? # A16/D32
61 vme2 at mainbus? # A24/D16
62 vme3 at mainbus? # A24/D32
63 vme4 at mainbus? # A32/D16
64 vme5 at mainbus? # A32/D32
65
66 #
67 # Serial ports
68 #
69 zstty0 at zsc1 channel 0 # ttya
70 zstty1 at zsc1 channel 1 # ttyb
71
72 kbd0 at zsc0 channel 0 # keyboard
73 #ms0 at zsc0 channel 1 # mouse
74
75 #
76 # Network devices
77 #
78
79 # Intel Ethernet (onboard, or VME)
80 ie0 at obio0 addr 0x65000000 ipl 3
81 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
82
83 # Lance Ethernet (only onboard)
84 le0 at obio0 addr 0x65002000 ipl 3
85
86 #
87 # Disk and tape devices
88 #
89
90 # Emulex SCSI (3/80 only)
91 # Both `dma' and `esp' are needed.
92 # See GENERIC3X for the flags description.
93 dma0 at obio0 addr 0x66001000 ipl 2
94 esp0 at obio0 addr 0x66000000 ipl 2 flags 0xff0f
95
96 # Floppy drive
97 fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40
98 fd0 at fdc0 # First (and only) floppy drive.
99
100 # Sun3 "si" SCSI controller (NCR 5380)
101 # See GENERIC3X for the flags description.
102 si0 at vme2 addr 0x200000 ipl 2 vect 0x40
103 si1 at vme2 addr 0x204000 ipl 2 vect 0x41
104
105 # Xylogics 450/451 controllers (VME A16/D16)
106 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
107 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
108 xy* at xyc? drive ?
109
110 # Xylogics 7053 controllers (VME A16/D32)
111 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
112 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
113 xd* at xdc? drive ?
114
115 # Xylogics 472 tape controllers?
116
117 #
118 # Frame buffer devices
119 # (Not needed for installation kernels.)
120
121 #
122 # SCSI infrastructure
123 #
124 scsibus* at scsi?
125
126 sd* at scsibus? target ? lun ? # SCSI disks
127 st* at scsibus? target ? lun ? # SCSI tapes
128 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
129 #ch* at scsibus? target ? lun ? # SCSI changer devices
130 #ss* at scsibus? target ? lun ? # SCSI scanners
131 #uk* at scsibus? target ? lun ? # unknown SCSI devices
132
133 # Memory-disk drivers (root for install tape)
134 pseudo-device md 2
135
136 # Misc.
137 pseudo-device loop 1 # network loopback
138 pseudo-device sl 2 # CSLIP
139