Home | History | Annotate | Line # | Download | only in conf
RAMDISK revision 1.5
      1  1.5  jtc #	$NetBSD: RAMDISK,v 1.5 1996/10/08 18:01:50 jtc Exp $
      2  1.1  gwr 
      3  1.1  gwr #
      4  1.1  gwr # RAMDISK: Root/swap on ramdisk
      5  1.1  gwr # This kernel is used to:
      6  1.1  gwr #	format the disk (not yet implemented)
      7  1.1  gwr #	partition the disk (disklabel)
      8  1.1  gwr #	install the miniroot in the swap partition
      9  1.1  gwr #
     10  1.1  gwr 
     11  1.5  jtc include "arch/sun3/conf/std.sun3"
     12  1.1  gwr 
     13  1.1  gwr # Machines to be supported by this kernel
     14  1.1  gwr options 	HAVECACHE		# Sun3/260 VAC
     15  1.1  gwr 
     16  1.1  gwr # Needs to be set per system.  i.e change these as you see fit
     17  1.1  gwr maxusers	2
     18  1.1  gwr 
     19  1.1  gwr # Standard system options
     20  1.3  gwr options 	SWAPPAGER, VNODEPAGER, DEVPAGER	# paging
     21  1.3  gwr #makeoptions DEBUG="-g"			# symbols for kgdb + nm
     22  1.2  gwr #options 	DDB
     23  1.2  gwr 
     24  1.2  gwr # Enable the hooks used for initializing the ram-disk.
     25  1.2  gwr options 	RAMDISK_HOOKS
     26  1.2  gwr options 	MINIROOTSIZE=512	# 256K
     27  1.1  gwr 
     28  1.1  gwr # Filesystem options
     29  1.1  gwr # May need NFSCLIENT to get miniroot image
     30  1.1  gwr options 	NFSCLIENT			# nfs client support
     31  1.1  gwr # Need FFS for the ramdisk image
     32  1.1  gwr options 	FFS				# ufs file system
     33  1.3  gwr options 	FIFO		# FIFOs; RECOMMENDED
     34  1.1  gwr 
     35  1.1  gwr # Networking options
     36  1.3  gwr options 	INET				# IP prototol stack support
     37  1.3  gwr # XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...)
     38  1.3  gwr options 	NFS_BOOT_RWSIZE=1024
     39  1.1  gwr 
     40  1.3  gwr # Compatability options
     41  1.1  gwr #options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
     42  1.1  gwr #options 	COMPAT_09	# NetBSD 0.9,
     43  1.1  gwr options 	COMPAT_10	# NetBSD 1.0,
     44  1.3  gwr options 	COMPAT_11	# NetBSD 1.1,
     45  1.4  mrg options		COMPAT_12	# NetBSD 1.2,
     46  1.1  gwr options 	COMPAT_43	# and 4.3BSD
     47  1.1  gwr options 	TCP_COMPAT_42	# TCP bug compatibility with 4.2BSD
     48  1.3  gwr #options 	UCONSOLE	# Allow non-root TIOCCONS
     49  1.1  gwr 
     50  1.1  gwr # Sun3-specific debugging options
     51  1.1  gwr options 	DIAGNOSTIC
     52  1.1  gwr 
     53  1.1  gwr # The config program assumes all devices have partions...
     54  1.1  gwr # Is it OK to put swap on a non-existent partition?
     55  1.1  gwr config		netbsd root on rd0a swap on rd0b
     56  1.1  gwr 
     57  1.2  gwr #
     58  1.3  gwr # Serial ports
     59  1.3  gwr #
     60  1.3  gwr zstty0 at zsc1 channel 0	# ttya
     61  1.3  gwr zstty1 at zsc1 channel 1	# ttyb
     62  1.3  gwr 
     63  1.3  gwr kbd0   at zsc0 channel 0	# keyboard
     64  1.3  gwr ms0    at zsc0 channel 1	# mouse
     65  1.3  gwr 
     66  1.3  gwr #
     67  1.2  gwr # Network devices
     68  1.2  gwr #
     69  1.1  gwr 
     70  1.2  gwr # Intel Ethernet (onboard, or VME)
     71  1.1  gwr ie0 at obio0 addr ? level ?
     72  1.1  gwr ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
     73  1.1  gwr 
     74  1.2  gwr # Lance Ethernet (only onboard)
     75  1.1  gwr le0 at obio0 addr ? level ?
     76  1.1  gwr 
     77  1.2  gwr #
     78  1.2  gwr # Disk and tape devices
     79  1.2  gwr #
     80  1.2  gwr 
     81  1.2  gwr # Sun3 "si" SCSI controller (NCR 5380)
     82  1.3  gwr si0 at obio0 addr ? level ?
     83  1.3  gwr si0 at vmes0 addr 0xff200000 level 2 vect 0x40
     84  1.3  gwr si1 at vmes0 addr 0xff204000 level 2 vect 0x41
     85  1.2  gwr 
     86  1.2  gwr # Xylogics 7053 controllers
     87  1.2  gwr # xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
     88  1.2  gwr # xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
     89  1.2  gwr # xd* at xdc? drive ?
     90  1.2  gwr 
     91  1.2  gwr # Xylogics 450/451 controllers
     92  1.2  gwr # xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
     93  1.2  gwr # xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
     94  1.2  gwr # xy* at xyc? drive ?
     95  1.2  gwr 
     96  1.2  gwr # Xylogics 472 tape controllers?
     97  1.2  gwr 
     98  1.2  gwr #
     99  1.2  gwr # Frame buffer devices
    100  1.2  gwr # (Not needed for the RAMDISK installation kernel)
    101  1.1  gwr 
    102  1.2  gwr #
    103  1.2  gwr # SCSI infrastructure
    104  1.2  gwr #
    105  1.1  gwr scsibus* at scsi?
    106  1.1  gwr 
    107  1.1  gwr # Sun compatible scsi device mappings
    108  1.1  gwr sd0 at scsibus? target 0 lun 0
    109  1.1  gwr sd1 at scsibus? target 0 lun 1
    110  1.1  gwr sd2 at scsibus? target 1 lun 0
    111  1.1  gwr sd3 at scsibus? target 1 lun 1
    112  1.1  gwr sd* at scsibus? target ? lun ?
    113  1.1  gwr 
    114  1.1  gwr st0 at scsibus? target 4 lun 0
    115  1.1  gwr st1 at scsibus? target 5 lun 0
    116  1.1  gwr st* at scsibus? target ? lun ?
    117  1.1  gwr 
    118  1.1  gwr cd0 at scsibus? target 6 lun 0
    119  1.1  gwr cd* at scsibus? target ? lun ?
    120  1.1  gwr 
    121  1.1  gwr #ch* at scsibus? target ? lun ?
    122  1.1  gwr 
    123  1.3  gwr # RAM-disk (root for install tape)
    124  1.3  gwr pseudo-device	rd	2		# RAM-disk
    125  1.2  gwr 
    126  1.2  gwr # Misc.
    127  1.1  gwr pseudo-device	loop	1		# network loopback
    128  1.2  gwr pseudo-device	sl	2		# CSLIP
    129  1.2  gwr pseudo-device	ppp	2		# PPP
    130  1.1  gwr 
    131