RAMDISK revision 1.24
1 # $NetBSD: RAMDISK,v 1.24 2000/06/10 04:29:41 tsutsui Exp $ 2 3 # RAMDISK: Root/swap on ramdisk 4 # This kernel is used to: 5 # format the disk (not yet implemented) 6 # partition the disk (disklabel) 7 # install the miniroot in the swap partition 8 9 include "arch/sun3/conf/std.sun3" 10 11 # Machines to be supported by this kernel 12 # options FPU_EMULATE # No FP code here! 13 options HAVECACHE # Sun3/260 VAC 14 15 # Needs to be set per system. i.e change these as you see fit 16 maxusers 2 17 18 # Standard system options 19 # ... debugging options 20 #options DDB 21 # Compatability options (none) 22 23 # Filesystem options 24 # Need FFS for the ramdisk image. 25 file-system FFS # Berkeley Fast Filesystem 26 # May need these to get miniroot image. 27 file-system NFS # Sun NFS client support 28 file-system CD9660 # ISO 9660 + Rock Ridge file system 29 30 # Networking options 31 options INET # IP prototol stack support 32 options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 33 34 # Enable the hooks used for initializing the root memory-disk. 35 options MEMORY_DISK_HOOKS 36 options MEMORY_DISK_IS_ROOT # force root on memory disk 37 options MEMORY_DISK_SERVER=0 # no userspace memory disk support 38 options MINIROOTSIZE=800 # size of memory disk, in blocks 39 40 config netbsd root on ? type ffs 41 42 # On-board I/O space (required) 43 include "arch/sun3/conf/obio.sun3" 44 45 # On-board memory (optional) 46 # See frame-buffers 47 # obmem0 at mainbus? 48 49 # VME bus support (optional) 50 # One unit for each address space 51 vme0 at mainbus? # A16/D16 52 vme1 at mainbus? # A16/D32 53 vme2 at mainbus? # A24/D16 54 vme3 at mainbus? # A24/D32 55 vme4 at mainbus? # A32/D16 56 vme5 at mainbus? # A32/D32 57 58 # 59 # Serial ports 60 # 61 zstty0 at zsc1 channel 0 # ttya 62 zstty1 at zsc1 channel 1 # ttyb 63 64 kbd0 at zsc0 channel 0 # keyboard 65 #ms0 at zsc0 channel 1 # mouse 66 67 # 68 # Network devices 69 # 70 71 # Intel Ethernet (onboard, or VME) 72 ie0 at obio0 addr 0x0C0000 ipl 3 73 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 74 75 # Lance Ethernet (only onboard) 76 le0 at obio0 addr 0x120000 ipl 3 77 78 # All Sun3 machines with an "le" (3/50, 3/60) should be 79 # presumed to have the old, buggy LANCE chip. (Rev. C) 80 options LANCE_REVC_BUG 81 82 # 83 # Disk and tape devices 84 # 85 86 # Sun3 "si" SCSI controller (NCR 5380) 87 # See GENERIC for the flags description. 88 si0 at obio0 addr 0x140000 ipl 2 89 si0 at vme2 addr 0x200000 ipl 2 vect 0x40 90 si1 at vme2 addr 0x204000 ipl 2 vect 0x41 91 92 # Xylogics 450/451 controllers (VME A16/D16) 93 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 94 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 95 xy* at xyc? drive ? 96 97 # Xylogics 7053 controllers (VME A16/D32) 98 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 99 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 100 xd* at xdc? drive ? 101 102 # Xylogics 472 tape controllers? 103 104 # Sun3/E SCSI+Ethernet board (VME A24/D16) 105 # Note: the board uses vect and vect+1 106 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 107 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 108 si* at sebuf? 109 ie* at sebuf? 110 111 # 112 # Frame buffer devices 113 # (Not needed for installation kernels.) 114 115 # 116 # SCSI infrastructure 117 # 118 scsibus* at scsi? 119 120 sd* at scsibus? target ? lun ? # SCSI disks 121 st* at scsibus? target ? lun ? # SCSI tapes 122 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 123 #ch* at scsibus? target ? lun ? # SCSI changer devices 124 #ss* at scsibus? target ? lun ? # SCSI scanners 125 #uk* at scsibus? target ? lun ? # unknown SCSI devices 126 127 # Memory-disk drivers (root for install tape) 128 pseudo-device md 2 129 130 # Misc. 131 pseudo-device loop 1 # network loopback 132 pseudo-device sl 2 # CSLIP 133
Indexes created Tue Sep 30 20:09:53 GMT 2025