RAMDISK revision 1.26
1 # $NetBSD: RAMDISK,v 1.26 2001/07/08 16:32:25 abs Exp $ 2 3 # RAMDISK: Root/swap on ramdisk 4 # This kernel is used to: 5 # format the disk (not yet implemented) 6 # partition the disk (disklabel) 7 # install the miniroot in the swap partition 8 9 include "arch/sun3/conf/std.sun3" 10 11 # Machines to be supported by this kernel 12 # options FPU_EMULATE # No FP code here! 13 options HAVECACHE # Sun3/260 VAC 14 15 # Needs to be set per system. i.e change these as you see fit 16 maxusers 2 17 18 # Standard system options 19 # ... debugging options 20 #options DDB 21 # Compatibility options (none) 22 23 # Filesystem options 24 # Need FFS for the ramdisk image. 25 file-system FFS # Berkeley Fast Filesystem 26 # May need these to get miniroot image. 27 file-system NFS # Sun NFS client support 28 file-system CD9660 # ISO 9660 + Rock Ridge file system 29 30 # Networking options 31 options INET # IP prototol stack support 32 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 33 34 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 35 36 # Enable the hooks used for initializing the root memory-disk. 37 options MEMORY_DISK_HOOKS 38 options MEMORY_DISK_IS_ROOT # force root on memory disk 39 options MEMORY_DISK_SERVER=0 # no userspace memory disk support 40 options MINIROOTSIZE=800 # size of memory disk, in blocks 41 42 config netbsd root on ? type ffs 43 44 # On-board I/O space (required) 45 include "arch/sun3/conf/obio.sun3" 46 47 # On-board memory (optional) 48 # See frame-buffers 49 # obmem0 at mainbus? 50 51 # VME bus support (optional) 52 # One unit for each address space 53 vme0 at mainbus? # A16/D16 54 vme1 at mainbus? # A16/D32 55 vme2 at mainbus? # A24/D16 56 vme3 at mainbus? # A24/D32 57 vme4 at mainbus? # A32/D16 58 vme5 at mainbus? # A32/D32 59 60 # 61 # Serial ports 62 # 63 zstty0 at zsc1 channel 0 # ttya 64 zstty1 at zsc1 channel 1 # ttyb 65 66 kbd0 at zsc0 channel 0 # keyboard 67 #ms0 at zsc0 channel 1 # mouse 68 69 # 70 # Network devices 71 # 72 73 # Intel Ethernet (onboard, or VME) 74 ie0 at obio0 addr 0x0C0000 ipl 3 75 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 76 77 # Lance Ethernet (only onboard) 78 le0 at obio0 addr 0x120000 ipl 3 79 80 # All Sun3 machines with an "le" (3/50, 3/60) should be 81 # presumed to have the old, buggy LANCE chip. (Rev. C) 82 options LANCE_REVC_BUG 83 84 # 85 # Disk and tape devices 86 # 87 88 # Sun3 "si" SCSI controller (NCR 5380) 89 # See GENERIC for the flags description. 90 si0 at obio0 addr 0x140000 ipl 2 91 si0 at vme2 addr 0x200000 ipl 2 vect 0x40 92 si1 at vme2 addr 0x204000 ipl 2 vect 0x41 93 94 # Xylogics 450/451 controllers (VME A16/D16) 95 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 96 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 97 xy* at xyc? drive ? 98 99 # Xylogics 7053 controllers (VME A16/D32) 100 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 101 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 102 xd* at xdc? drive ? 103 104 # Xylogics 472 tape controllers? 105 106 # Sun3/E SCSI+Ethernet board (VME A24/D16) 107 # Note: the board uses vect and vect+1 108 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 109 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 110 si* at sebuf? 111 ie* at sebuf? 112 113 # 114 # Frame buffer devices 115 # (Not needed for installation kernels.) 116 117 # 118 # SCSI infrastructure 119 # 120 scsibus* at scsi? 121 122 sd* at scsibus? target ? lun ? # SCSI disks 123 st* at scsibus? target ? lun ? # SCSI tapes 124 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 125 #ch* at scsibus? target ? lun ? # SCSI changer devices 126 #ss* at scsibus? target ? lun ? # SCSI scanners 127 #uk* at scsibus? target ? lun ? # unknown SCSI devices 128 129 # Memory-disk drivers (root for install tape) 130 pseudo-device md 2 131 132 # Misc. 133 pseudo-device loop 1 # network loopback 134 pseudo-device sl 2 # CSLIP 135
Indexes created Tue Sep 30 20:09:53 GMT 2025