xy.c revision 1.34
1 /* $NetBSD: xy.c,v 1.34 2001/07/22 13:34:08 wiz Exp $ */ 2 3 /* 4 * 5 * Copyright (c) 1995 Charles D. Cranor 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. All advertising materials mentioning features or use of this software 17 * must display the following acknowledgement: 18 * This product includes software developed by Charles D. Cranor. 19 * 4. The name of the author may not be used to endorse or promote products 20 * derived from this software without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 24 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 25 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34 /* 35 * 36 * x y . c x y l o g i c s 4 5 0 / 4 5 1 s m d d r i v e r 37 * 38 * author: Chuck Cranor <chuck (at) ccrc.wustl.edu> 39 * id: &Id: xy.c,v 1.1 1995/09/25 20:35:14 chuck Exp & 40 * started: 14-Sep-95 41 * references: [1] Xylogics Model 753 User's Manual 42 * part number: 166-753-001, Revision B, May 21, 1988. 43 * "Your Partner For Performance" 44 * [2] other NetBSD disk device drivers 45 * [3] Xylogics Model 450 User's Manual 46 * part number: 166-017-001, Revision B, 1983. 47 * [4] Addendum to Xylogics Model 450 Disk Controller User's 48 * Manual, Jan. 1985. 49 * [5] The 451 Controller, Rev. B3, September 2, 1986. 50 * [6] David Jones <dej (at) achilles.net>'s unfinished 450/451 driver 51 * 52 */ 53 54 #undef XYC_DEBUG /* full debug */ 55 #undef XYC_DIAG /* extra sanity checks */ 56 #if defined(DIAGNOSTIC) && !defined(XYC_DIAG) 57 #define XYC_DIAG /* link in with master DIAG option */ 58 #endif 59 60 #include <sys/param.h> 61 #include <sys/proc.h> 62 #include <sys/systm.h> 63 #include <sys/kernel.h> 64 #include <sys/file.h> 65 #include <sys/stat.h> 66 #include <sys/ioctl.h> 67 #include <sys/buf.h> 68 #include <sys/uio.h> 69 #include <sys/malloc.h> 70 #include <sys/device.h> 71 #include <sys/disklabel.h> 72 #include <sys/disk.h> 73 #include <sys/syslog.h> 74 #include <sys/dkbad.h> 75 #include <sys/conf.h> 76 77 #include <uvm/uvm_extern.h> 78 79 #include <dev/sun/disklabel.h> 80 81 #include <machine/autoconf.h> 82 #include <machine/dvma.h> 83 84 #include <sun3/dev/xyreg.h> 85 #include <sun3/dev/xyvar.h> 86 #include <sun3/dev/xio.h> 87 88 #include "locators.h" 89 90 /* 91 * Print a complaint when no xy children were specified 92 * in the config file. Better than a link error... 93 * 94 * XXX: Some folks say this driver should be split in two, 95 * but that seems pointless with ONLY one type of child. 96 */ 97 #include "xy.h" 98 #if NXY == 0 99 #error "xyc but no xy?" 100 #endif 101 102 /* 103 * macros 104 */ 105 106 /* 107 * XYC_GO: start iopb ADDR (DVMA addr in a u_long) on XYC 108 */ 109 #define XYC_GO(XYC, ADDR) { \ 110 (XYC)->xyc_addr_lo = ((ADDR) & 0xff); \ 111 (ADDR) = ((ADDR) >> 8); \ 112 (XYC)->xyc_addr_hi = ((ADDR) & 0xff); \ 113 (ADDR) = ((ADDR) >> 8); \ 114 (XYC)->xyc_reloc_lo = ((ADDR) & 0xff); \ 115 (ADDR) = ((ADDR) >> 8); \ 116 (XYC)->xyc_reloc_hi = (ADDR); \ 117 (XYC)->xyc_csr = XYC_GBSY; /* go! */ \ 118 } 119 120 /* 121 * XYC_DONE: don't need IORQ, get error code and free (done after xyc_cmd) 122 */ 123 124 #define XYC_DONE(SC,ER) { \ 125 if ((ER) == XY_ERR_AOK) { \ 126 (ER) = (SC)->ciorq->errno; \ 127 (SC)->ciorq->mode = XY_SUB_FREE; \ 128 wakeup((SC)->ciorq); \ 129 } \ 130 } 131 132 /* 133 * XYC_ADVANCE: advance iorq's pointers by a number of sectors 134 */ 135 136 #define XYC_ADVANCE(IORQ, N) { \ 137 if (N) { \ 138 (IORQ)->sectcnt -= (N); \ 139 (IORQ)->blockno += (N); \ 140 (IORQ)->dbuf += ((N)*XYFM_BPS); \ 141 } \ 142 } 143 144 /* 145 * note - addresses you can sleep on: 146 * [1] & of xy_softc's "state" (waiting for a chance to attach a drive) 147 * [2] & an iorq (waiting for an XY_SUB_WAIT iorq to finish) 148 */ 149 150 151 /* 152 * function prototypes 153 * "xyc_*" functions are internal, all others are external interfaces 154 */ 155 156 /* internals */ 157 struct xy_iopb *xyc_chain __P((struct xyc_softc *, struct xy_iorq *)); 158 int xyc_cmd __P((struct xyc_softc *, int, int, int, int, int, char *, int)); 159 char *xyc_e2str __P((int)); 160 int xyc_entoact __P((int)); 161 int xyc_error __P((struct xyc_softc *, struct xy_iorq *, 162 struct xy_iopb *, int)); 163 int xyc_ioctlcmd __P((struct xy_softc *, dev_t dev, struct xd_iocmd *)); 164 void xyc_perror __P((struct xy_iorq *, struct xy_iopb *, int)); 165 int xyc_piodriver __P((struct xyc_softc *, struct xy_iorq *)); 166 int xyc_remove_iorq __P((struct xyc_softc *)); 167 int xyc_reset __P((struct xyc_softc *, int, struct xy_iorq *, int, 168 struct xy_softc *)); 169 inline void xyc_rqinit __P((struct xy_iorq *, struct xyc_softc *, 170 struct xy_softc *, int, u_long, int, 171 caddr_t, struct buf *)); 172 void xyc_rqtopb __P((struct xy_iorq *, struct xy_iopb *, int, int)); 173 void xyc_start __P((struct xyc_softc *, struct xy_iorq *)); 174 int xyc_startbuf __P((struct xyc_softc *, struct xy_softc *, struct buf *)); 175 int xyc_submit_iorq __P((struct xyc_softc *, struct xy_iorq *, int)); 176 void xyc_tick __P((void *)); 177 int xyc_unbusy __P((struct xyc *, int)); 178 void xyc_xyreset __P((struct xyc_softc *, struct xy_softc *)); 179 180 /* machine interrupt hook */ 181 int xycintr __P((void *)); 182 183 /* bdevsw, cdevsw */ 184 bdev_decl(xy); 185 cdev_decl(xy); 186 187 /* autoconf */ 188 static int xycmatch __P((struct device *, struct cfdata *, void *)); 189 static void xycattach __P((struct device *, struct device *, void *)); 190 static int xyc_print __P((void *, const char *name)); 191 192 static int xymatch __P((struct device *, struct cfdata *, void *)); 193 static void xyattach __P((struct device *, struct device *, void *)); 194 static void xy_init __P((struct xy_softc *)); 195 196 static void xydummystrat __P((struct buf *)); 197 int xygetdisklabel __P((struct xy_softc *, void *)); 198 199 /* 200 * cfattach's: device driver interface to autoconfig 201 */ 202 203 struct cfattach xyc_ca = { 204 sizeof(struct xyc_softc), xycmatch, xycattach 205 }; 206 207 struct cfattach xy_ca = { 208 sizeof(struct xy_softc), xymatch, xyattach 209 }; 210 211 extern struct cfdriver xy_cd; 212 213 struct xyc_attach_args { /* this is the "aux" args to xyattach */ 214 int driveno; /* unit number */ 215 }; 216 217 /* 218 * dkdriver 219 */ 220 221 struct dkdriver xydkdriver = { xystrategy }; 222 223 /* 224 * start: disk label fix code (XXX) 225 */ 226 227 static void *xy_labeldata; 228 229 static void 230 xydummystrat(bp) 231 struct buf *bp; 232 { 233 if (bp->b_bcount != XYFM_BPS) 234 panic("xydummystrat"); 235 bcopy(xy_labeldata, bp->b_data, XYFM_BPS); 236 bp->b_flags |= B_DONE; 237 bp->b_flags &= ~B_BUSY; 238 } 239 240 int 241 xygetdisklabel(xy, b) 242 struct xy_softc *xy; 243 void *b; 244 { 245 char *err; 246 struct sun_disklabel *sdl; 247 248 /* We already have the label data in `b'; setup for dummy strategy */ 249 xy_labeldata = b; 250 251 /* Required parameter for readdisklabel() */ 252 xy->sc_dk.dk_label->d_secsize = XYFM_BPS; 253 254 err = readdisklabel(MAKEDISKDEV(0, xy->sc_dev.dv_unit, RAW_PART), 255 xydummystrat, 256 xy->sc_dk.dk_label, xy->sc_dk.dk_cpulabel); 257 if (err) { 258 printf("%s: %s\n", xy->sc_dev.dv_xname, err); 259 return(XY_ERR_FAIL); 260 } 261 262 /* Ok, we have the label; fill in `pcyl' if there's SunOS magic */ 263 sdl = (struct sun_disklabel *)xy->sc_dk.dk_cpulabel->cd_block; 264 if (sdl->sl_magic == SUN_DKMAGIC) 265 xy->pcyl = sdl->sl_pcyl; 266 else { 267 printf("%s: WARNING: no `pcyl' in disk label.\n", 268 xy->sc_dev.dv_xname); 269 xy->pcyl = xy->sc_dk.dk_label->d_ncylinders + 270 xy->sc_dk.dk_label->d_acylinders; 271 printf("%s: WARNING: guessing pcyl=%d (ncyl+acyl)\n", 272 xy->sc_dev.dv_xname, xy->pcyl); 273 } 274 275 xy->ncyl = xy->sc_dk.dk_label->d_ncylinders; 276 xy->acyl = xy->sc_dk.dk_label->d_acylinders; 277 xy->nhead = xy->sc_dk.dk_label->d_ntracks; 278 xy->nsect = xy->sc_dk.dk_label->d_nsectors; 279 xy->sectpercyl = xy->nhead * xy->nsect; 280 xy->sc_dk.dk_label->d_secsize = XYFM_BPS; /* not handled by 281 * sun->bsd */ 282 return(XY_ERR_AOK); 283 } 284 285 /* 286 * end: disk label fix code (XXX) 287 */ 288 289 /* 290 * a u t o c o n f i g f u n c t i o n s 291 */ 292 293 /* 294 * xycmatch: determine if xyc is present or not. we do a 295 * soft reset to detect the xyc. 296 */ 297 static int 298 xycmatch(parent, cf, aux) 299 struct device *parent; 300 struct cfdata *cf; 301 void *aux; 302 { 303 struct confargs *ca = aux; 304 305 /* No default VME address. */ 306 if (ca->ca_paddr == -1) 307 return (0); 308 309 /* Make sure something is there... */ 310 if (bus_peek(ca->ca_bustype, ca->ca_paddr + 5, 1) == -1) 311 return (0); 312 313 /* Default interrupt priority. */ 314 if (ca->ca_intpri == -1) 315 ca->ca_intpri = 2; 316 317 return (1); 318 } 319 320 /* 321 * xycattach: attach controller 322 */ 323 static void 324 xycattach(parent, self, aux) 325 struct device *parent, *self; 326 void *aux; 327 { 328 struct xyc_softc *xyc = (void *) self; 329 struct confargs *ca = aux; 330 struct xyc_attach_args xa; 331 int lcv, err, res, pbsz; 332 void *tmp, *tmp2; 333 u_long ultmp; 334 335 /* get addressing and intr level stuff from autoconfig and load it 336 * into our xyc_softc. */ 337 338 xyc->xyc = (struct xyc *) 339 bus_mapin(ca->ca_bustype, ca->ca_paddr, sizeof(struct xyc)); 340 xyc->bustype = ca->ca_bustype; 341 xyc->ipl = ca->ca_intpri; 342 xyc->vector = ca->ca_intvec; 343 xyc->no_ols = 0; /* XXX should be from config */ 344 345 for (lcv = 0; lcv < XYC_MAXDEV; lcv++) 346 xyc->sc_drives[lcv] = (struct xy_softc *) 0; 347 348 /* 349 * allocate and zero buffers 350 * check boundaries of the KVA's ... all IOPBs must reside in 351 * the same 64K region. 352 */ 353 354 pbsz = XYC_MAXIOPB * sizeof(struct xy_iopb); 355 tmp = tmp2 = (struct xy_iopb *) dvma_malloc(pbsz); /* KVA */ 356 ultmp = (u_long) tmp; 357 if ((ultmp & 0xffff0000) != ((ultmp + pbsz) & 0xffff0000)) { 358 tmp = (struct xy_iopb *) dvma_malloc(pbsz); /* retry! */ 359 dvma_free(tmp2, pbsz); 360 ultmp = (u_long) tmp; 361 if ((ultmp & 0xffff0000) != ((ultmp + pbsz) & 0xffff0000)) { 362 printf("%s: can't alloc IOPB mem in 64K\n", 363 xyc->sc_dev.dv_xname); 364 return; 365 } 366 } 367 bzero(tmp, pbsz); 368 xyc->iopbase = tmp; 369 xyc->dvmaiopb = (struct xy_iopb *) 370 dvma_kvtopa(xyc->iopbase, xyc->bustype); 371 xyc->reqs = (struct xy_iorq *) 372 malloc(XYC_MAXIOPB * sizeof(struct xy_iorq), M_DEVBUF, M_NOWAIT); 373 if (xyc->reqs == NULL) 374 panic("xyc malloc"); 375 bzero(xyc->reqs, XYC_MAXIOPB * sizeof(struct xy_iorq)); 376 377 /* 378 * init iorq to iopb pointers, and non-zero fields in the 379 * iopb which never change. 380 */ 381 382 for (lcv = 0; lcv < XYC_MAXIOPB; lcv++) { 383 xyc->xy_chain[lcv] = NULL; 384 xyc->reqs[lcv].iopb = &xyc->iopbase[lcv]; 385 xyc->iopbase[lcv].asr = 1; /* always the same */ 386 xyc->iopbase[lcv].eef = 1; /* always the same */ 387 xyc->iopbase[lcv].ecm = XY_ECM; /* always the same */ 388 xyc->iopbase[lcv].aud = 1; /* always the same */ 389 xyc->iopbase[lcv].relo = 1; /* always the same */ 390 xyc->iopbase[lcv].thro = XY_THRO;/* always the same */ 391 } 392 xyc->ciorq = &xyc->reqs[XYC_CTLIOPB]; /* short hand name */ 393 xyc->ciopb = &xyc->iopbase[XYC_CTLIOPB]; /* short hand name */ 394 xyc->xy_hand = 0; 395 396 /* read controller parameters and insure we have a 450/451 */ 397 398 err = xyc_cmd(xyc, XYCMD_ST, 0, 0, 0, 0, 0, XY_SUB_POLL); 399 res = xyc->ciopb->ctyp; 400 XYC_DONE(xyc, err); 401 if (res != XYCT_450) { 402 if (err) 403 printf(": %s: ", xyc_e2str(err)); 404 printf(": doesn't identify as a 450/451\n"); 405 return; 406 } 407 printf(": Xylogics 450/451"); 408 if (xyc->no_ols) 409 printf(" [OLS disabled]"); /* 450 doesn't overlap seek right */ 410 printf("\n"); 411 if (err) { 412 printf("%s: error: %s\n", xyc->sc_dev.dv_xname, 413 xyc_e2str(err)); 414 return; 415 } 416 if ((xyc->xyc->xyc_csr & XYC_ADRM) == 0) { 417 printf("%s: 24 bit addressing turned off\n", 418 xyc->sc_dev.dv_xname); 419 printf("please set hardware jumpers JM1-JM2=in, JM3-JM4=out\n"); 420 printf("to enable 24 bit mode and this driver\n"); 421 return; 422 } 423 424 /* link in interrupt with higher level software */ 425 isr_add_vectored(xycintr, (void *)xyc, 426 ca->ca_intpri, ca->ca_intvec); 427 evcnt_attach_dynamic(&xyc->sc_intrcnt, EVCNT_TYPE_INTR, NULL, 428 xyc->sc_dev.dv_xname, "intr"); 429 430 callout_init(&xyc->sc_tick_ch); 431 432 /* now we must look for disks using autoconfig */ 433 for (xa.driveno = 0; xa.driveno < XYC_MAXDEV; xa.driveno++) 434 (void) config_found(self, (void *) &xa, xyc_print); 435 436 /* start the watchdog clock */ 437 callout_reset(&xyc->sc_tick_ch, XYC_TICKCNT, xyc_tick, xyc); 438 } 439 440 static int 441 xyc_print(aux, name) 442 void *aux; 443 const char *name; 444 { 445 struct xyc_attach_args *xa = aux; 446 447 if (name != NULL) 448 printf("%s: ", name); 449 450 if (xa->driveno != -1) 451 printf(" drive %d", xa->driveno); 452 453 return UNCONF; 454 } 455 456 /* 457 * xymatch: probe for disk. 458 * 459 * note: we almost always say disk is present. this allows us to 460 * spin up and configure a disk after the system is booted (we can 461 * call xyattach!). Also, wire down the relationship between the 462 * xy* and xyc* devices, to simplify boot device identification. 463 */ 464 static int 465 xymatch(parent, cf, aux) 466 struct device *parent; 467 struct cfdata *cf; 468 void *aux; 469 { 470 struct xyc_attach_args *xa = aux; 471 int xy_unit; 472 473 /* Match only on the "wired-down" controller+disk. */ 474 xy_unit = parent->dv_unit * 2 + xa->driveno; 475 if (cf->cf_unit != xy_unit) 476 return (0); 477 478 return (1); 479 } 480 481 /* 482 * xyattach: attach a disk. 483 */ 484 static void 485 xyattach(parent, self, aux) 486 struct device *parent, *self; 487 void *aux; 488 { 489 struct xy_softc *xy = (void *) self; 490 struct xyc_softc *xyc = (void *) parent; 491 struct xyc_attach_args *xa = aux; 492 493 printf("\n"); 494 495 /* 496 * Always re-initialize the disk structure. We want statistics 497 * to start with a clean slate. 498 */ 499 bzero(&xy->sc_dk, sizeof(xy->sc_dk)); 500 xy->sc_dk.dk_driver = &xydkdriver; 501 xy->sc_dk.dk_name = xy->sc_dev.dv_xname; 502 503 xy->state = XY_DRIVE_UNKNOWN; /* to start */ 504 xy->flags = 0; 505 xy->parent = xyc; 506 507 /* init queue of waiting bufs */ 508 BUFQ_INIT(&xy->xyq); 509 xy->xyrq = &xyc->reqs[xa->driveno]; 510 511 xy->xy_drive = xa->driveno; 512 xyc->sc_drives[xa->driveno] = xy; 513 514 /* Do init work common to attach and open. */ 515 xy_init(xy); 516 } 517 518 /* 519 * end of autoconfig functions 520 */ 521 522 /* 523 * Initialize a disk. This can be called from both autoconf and 524 * also from xyopen/xystrategy. 525 */ 526 static void 527 xy_init(xy) 528 struct xy_softc *xy; 529 { 530 struct xyc_softc *xyc; 531 struct dkbad *dkb; 532 void *dvmabuf; 533 int err, spt, mb, blk, lcv, fullmode, newstate; 534 535 xyc = xy->parent; 536 xy->state = XY_DRIVE_ATTACHING; 537 newstate = XY_DRIVE_UNKNOWN; 538 fullmode = (cold) ? XY_SUB_POLL : XY_SUB_WAIT; 539 dvmabuf = dvma_malloc(XYFM_BPS); 540 541 /* first try and reset the drive */ 542 543 err = xyc_cmd(xyc, XYCMD_RST, 0, xy->xy_drive, 0, 0, 0, fullmode); 544 XYC_DONE(xyc, err); 545 if (err == XY_ERR_DNRY) { 546 printf("%s: drive %d: off-line\n", 547 xy->sc_dev.dv_xname, xy->xy_drive); 548 goto done; 549 } 550 if (err) { 551 printf("%s: ERROR 0x%02x (%s)\n", 552 xy->sc_dev.dv_xname, err, xyc_e2str(err)); 553 goto done; 554 } 555 printf("%s: drive %d ready", 556 xy->sc_dev.dv_xname, xy->xy_drive); 557 558 /* 559 * now set drive parameters (to semi-bogus values) so we can read the 560 * disk label. 561 */ 562 xy->pcyl = xy->ncyl = 1; 563 xy->acyl = 0; 564 xy->nhead = 1; 565 xy->nsect = 1; 566 xy->sectpercyl = 1; 567 for (lcv = 0; lcv < 126; lcv++) /* init empty bad144 table */ 568 xy->dkb.bt_bad[lcv].bt_cyl = 569 xy->dkb.bt_bad[lcv].bt_trksec = 0xffff; 570 571 /* read disk label */ 572 for (xy->drive_type = 0 ; xy->drive_type <= XYC_MAXDT ; 573 xy->drive_type++) { 574 err = xyc_cmd(xyc, XYCMD_RD, 0, xy->xy_drive, 0, 1, 575 dvmabuf, fullmode); 576 XYC_DONE(xyc, err); 577 if (err == XY_ERR_AOK) break; 578 } 579 580 if (err != XY_ERR_AOK) { 581 printf("%s: reading disk label failed: %s\n", 582 xy->sc_dev.dv_xname, xyc_e2str(err)); 583 goto done; 584 } 585 printf("%s: drive type %d\n", 586 xy->sc_dev.dv_xname, xy->drive_type); 587 588 newstate = XY_DRIVE_NOLABEL; 589 590 xy->hw_spt = spt = 0; /* XXX needed ? */ 591 /* Attach the disk: must be before getdisklabel to malloc label */ 592 disk_attach(&xy->sc_dk); 593 594 if (xygetdisklabel(xy, dvmabuf) != XY_ERR_AOK) 595 goto done; 596 597 /* inform the user of what is up */ 598 printf("%s: <%s>, pcyl %d\n", 599 xy->sc_dev.dv_xname, 600 (char *)dvmabuf, xy->pcyl); 601 mb = xy->ncyl * (xy->nhead * xy->nsect) / (1048576 / XYFM_BPS); 602 printf("%s: %dMB, %d cyl, %d head, %d sec\n", 603 xy->sc_dev.dv_xname, mb, 604 xy->ncyl, xy->nhead, xy->nsect); 605 606 /* 607 * 450/451 stupidity: the drive type is encoded into the format 608 * of the disk. the drive type in the IOPB must match the drive 609 * type in the format, or you will not be able to do I/O to the 610 * disk (you get header not found errors). if you have two drives 611 * of different sizes that have the same drive type in their 612 * formatting then you are out of luck. 613 * 614 * this problem was corrected in the 753/7053. 615 */ 616 617 for (lcv = 0 ; lcv < XYC_MAXDEV ; lcv++) { 618 struct xy_softc *oxy; 619 620 oxy = xyc->sc_drives[lcv]; 621 if (oxy == NULL || oxy == xy) continue; 622 if (oxy->drive_type != xy->drive_type) continue; 623 if (xy->nsect != oxy->nsect || xy->pcyl != oxy->pcyl || 624 xy->nhead != oxy->nhead) { 625 printf("%s: %s and %s must be the same size!\n", 626 xyc->sc_dev.dv_xname, 627 xy ->sc_dev.dv_xname, 628 oxy->sc_dev.dv_xname); 629 panic("xy drive size mismatch"); 630 } 631 } 632 633 634 /* now set the real drive parameters! */ 635 blk = (xy->nsect - 1) + 636 ((xy->nhead - 1) * xy->nsect) + 637 ((xy->pcyl - 1) * xy->nsect * xy->nhead); 638 err = xyc_cmd(xyc, XYCMD_SDS, 0, xy->xy_drive, blk, 0, 0, fullmode); 639 XYC_DONE(xyc, err); 640 if (err) { 641 printf("%s: write drive size failed: %s\n", 642 xy->sc_dev.dv_xname, xyc_e2str(err)); 643 goto done; 644 } 645 newstate = XY_DRIVE_ONLINE; 646 647 /* 648 * read bad144 table. this table resides on the first sector of the 649 * last track of the disk (i.e. second cyl of "acyl" area). 650 */ 651 blk = (xy->ncyl + xy->acyl - 1) * (xy->nhead * xy->nsect) + 652 /* last cyl */ 653 (xy->nhead - 1) * xy->nsect; /* last head */ 654 err = xyc_cmd(xyc, XYCMD_RD, 0, xy->xy_drive, blk, 1, 655 dvmabuf, fullmode); 656 XYC_DONE(xyc, err); 657 if (err) { 658 printf("%s: reading bad144 failed: %s\n", 659 xy->sc_dev.dv_xname, xyc_e2str(err)); 660 goto done; 661 } 662 663 /* check dkbad for sanity */ 664 dkb = (struct dkbad *) dvmabuf; 665 for (lcv = 0; lcv < 126; lcv++) { 666 if ((dkb->bt_bad[lcv].bt_cyl == 0xffff || 667 dkb->bt_bad[lcv].bt_cyl == 0) && 668 dkb->bt_bad[lcv].bt_trksec == 0xffff) 669 continue; /* blank */ 670 if (dkb->bt_bad[lcv].bt_cyl >= xy->ncyl) 671 break; 672 if ((dkb->bt_bad[lcv].bt_trksec >> 8) >= xy->nhead) 673 break; 674 if ((dkb->bt_bad[lcv].bt_trksec & 0xff) >= xy->nsect) 675 break; 676 } 677 if (lcv != 126) { 678 printf("%s: warning: invalid bad144 sector!\n", 679 xy->sc_dev.dv_xname); 680 } else { 681 bcopy(dvmabuf, &xy->dkb, XYFM_BPS); 682 } 683 684 done: 685 xy->state = newstate; 686 dvma_free(dvmabuf, XYFM_BPS); 687 } 688 689 /* 690 * { b , c } d e v s w f u n c t i o n s 691 */ 692 693 /* 694 * xyclose: close device 695 */ 696 int 697 xyclose(dev, flag, fmt, p) 698 dev_t dev; 699 int flag, fmt; 700 struct proc *p; 701 { 702 struct xy_softc *xy = xy_cd.cd_devs[DISKUNIT(dev)]; 703 int part = DISKPART(dev); 704 705 /* clear mask bits */ 706 707 switch (fmt) { 708 case S_IFCHR: 709 xy->sc_dk.dk_copenmask &= ~(1 << part); 710 break; 711 case S_IFBLK: 712 xy->sc_dk.dk_bopenmask &= ~(1 << part); 713 break; 714 } 715 xy->sc_dk.dk_openmask = xy->sc_dk.dk_copenmask | xy->sc_dk.dk_bopenmask; 716 717 return 0; 718 } 719 720 /* 721 * xydump: crash dump system 722 */ 723 int 724 xydump(dev, blkno, va, sz) 725 dev_t dev; 726 daddr_t blkno; 727 caddr_t va; 728 size_t sz; 729 { 730 int unit, part; 731 struct xy_softc *xy; 732 733 unit = DISKUNIT(dev); 734 if (unit >= xy_cd.cd_ndevs) 735 return ENXIO; 736 part = DISKPART(dev); 737 738 xy = xy_cd.cd_devs[unit]; 739 740 printf("%s%c: crash dump not supported (yet)\n", xy->sc_dev.dv_xname, 741 'a' + part); 742 743 return ENXIO; 744 745 /* outline: globals: "dumplo" == sector number of partition to start 746 * dump at (convert to physical sector with partition table) 747 * "dumpsize" == size of dump in clicks "physmem" == size of physical 748 * memory (clicks, ctob() to get bytes) (normal case: dumpsize == 749 * physmem) 750 * 751 * dump a copy of physical memory to the dump device starting at sector 752 * "dumplo" in the swap partition (make sure > 0). map in pages as 753 * we go. use polled I/O. 754 * 755 * XXX how to handle NON_CONTIG? 756 */ 757 } 758 759 /* 760 * xyioctl: ioctls on XY drives. based on ioctl's of other netbsd disks. 761 */ 762 int 763 xyioctl(dev, command, addr, flag, p) 764 dev_t dev; 765 u_long command; 766 caddr_t addr; 767 int flag; 768 struct proc *p; 769 770 { 771 struct xy_softc *xy; 772 struct xd_iocmd *xio; 773 int error, s, unit; 774 775 unit = DISKUNIT(dev); 776 777 if (unit >= xy_cd.cd_ndevs || (xy = xy_cd.cd_devs[unit]) == NULL) 778 return (ENXIO); 779 780 /* switch on ioctl type */ 781 782 switch (command) { 783 case DIOCSBAD: /* set bad144 info */ 784 if ((flag & FWRITE) == 0) 785 return EBADF; 786 s = splbio(); 787 bcopy(addr, &xy->dkb, sizeof(xy->dkb)); 788 splx(s); 789 return 0; 790 791 case DIOCGDINFO: /* get disk label */ 792 bcopy(xy->sc_dk.dk_label, addr, sizeof(struct disklabel)); 793 return 0; 794 795 case DIOCGPART: /* get partition info */ 796 ((struct partinfo *) addr)->disklab = xy->sc_dk.dk_label; 797 ((struct partinfo *) addr)->part = 798 &xy->sc_dk.dk_label->d_partitions[DISKPART(dev)]; 799 return 0; 800 801 case DIOCSDINFO: /* set disk label */ 802 if ((flag & FWRITE) == 0) 803 return EBADF; 804 error = setdisklabel(xy->sc_dk.dk_label, 805 (struct disklabel *) addr, /* xy->sc_dk.dk_openmask : */ 0, 806 xy->sc_dk.dk_cpulabel); 807 if (error == 0) { 808 if (xy->state == XY_DRIVE_NOLABEL) 809 xy->state = XY_DRIVE_ONLINE; 810 } 811 return error; 812 813 case DIOCWLABEL: /* change write status of disk label */ 814 if ((flag & FWRITE) == 0) 815 return EBADF; 816 if (*(int *) addr) 817 xy->flags |= XY_WLABEL; 818 else 819 xy->flags &= ~XY_WLABEL; 820 return 0; 821 822 case DIOCWDINFO: /* write disk label */ 823 if ((flag & FWRITE) == 0) 824 return EBADF; 825 error = setdisklabel(xy->sc_dk.dk_label, 826 (struct disklabel *) addr, /* xy->sc_dk.dk_openmask : */ 0, 827 xy->sc_dk.dk_cpulabel); 828 if (error == 0) { 829 if (xy->state == XY_DRIVE_NOLABEL) 830 xy->state = XY_DRIVE_ONLINE; 831 832 /* Simulate opening partition 0 so write succeeds. */ 833 xy->sc_dk.dk_openmask |= (1 << 0); 834 error = writedisklabel(MAKEDISKDEV(major(dev), DISKUNIT(dev), RAW_PART), 835 xystrategy, xy->sc_dk.dk_label, 836 xy->sc_dk.dk_cpulabel); 837 xy->sc_dk.dk_openmask = 838 xy->sc_dk.dk_copenmask | xy->sc_dk.dk_bopenmask; 839 } 840 return error; 841 842 case DIOSXDCMD: 843 xio = (struct xd_iocmd *) addr; 844 if ((error = suser(p->p_ucred, &p->p_acflag)) != 0) 845 return (error); 846 return (xyc_ioctlcmd(xy, dev, xio)); 847 848 default: 849 return ENOTTY; 850 } 851 } 852 853 /* 854 * xyopen: open drive 855 */ 856 int 857 xyopen(dev, flag, fmt, p) 858 dev_t dev; 859 int flag, fmt; 860 struct proc *p; 861 { 862 int err, unit, part, s; 863 struct xy_softc *xy; 864 865 /* first, could it be a valid target? */ 866 unit = DISKUNIT(dev); 867 if (unit >= xy_cd.cd_ndevs || (xy = xy_cd.cd_devs[unit]) == NULL) 868 return (ENXIO); 869 part = DISKPART(dev); 870 err = 0; 871 872 /* 873 * If some other processing is doing init, sleep. 874 */ 875 s = splbio(); 876 while (xy->state == XY_DRIVE_ATTACHING) { 877 if (tsleep(&xy->state, PRIBIO, "xyopen", 0)) { 878 err = EINTR; 879 goto done; 880 } 881 } 882 /* Do we need to init the drive? */ 883 if (xy->state == XY_DRIVE_UNKNOWN) { 884 xy_init(xy); 885 wakeup(&xy->state); 886 } 887 /* Was the init successful? */ 888 if (xy->state == XY_DRIVE_UNKNOWN) { 889 err = EIO; 890 goto done; 891 } 892 893 /* check for partition */ 894 if (part != RAW_PART && 895 (part >= xy->sc_dk.dk_label->d_npartitions || 896 xy->sc_dk.dk_label->d_partitions[part].p_fstype == FS_UNUSED)) { 897 err = ENXIO; 898 goto done; 899 } 900 901 /* set open masks */ 902 switch (fmt) { 903 case S_IFCHR: 904 xy->sc_dk.dk_copenmask |= (1 << part); 905 break; 906 case S_IFBLK: 907 xy->sc_dk.dk_bopenmask |= (1 << part); 908 break; 909 } 910 xy->sc_dk.dk_openmask = xy->sc_dk.dk_copenmask | xy->sc_dk.dk_bopenmask; 911 912 done: 913 splx(s); 914 return (err); 915 } 916 917 int 918 xyread(dev, uio, flags) 919 dev_t dev; 920 struct uio *uio; 921 int flags; 922 { 923 924 return (physio(xystrategy, NULL, dev, B_READ, minphys, uio)); 925 } 926 927 int 928 xywrite(dev, uio, flags) 929 dev_t dev; 930 struct uio *uio; 931 int flags; 932 { 933 934 return (physio(xystrategy, NULL, dev, B_WRITE, minphys, uio)); 935 } 936 937 938 /* 939 * xysize: return size of a partition for a dump 940 */ 941 942 int 943 xysize(dev) 944 dev_t dev; 945 946 { 947 struct xy_softc *xysc; 948 int unit, part, size, omask; 949 950 /* valid unit? */ 951 unit = DISKUNIT(dev); 952 if (unit >= xy_cd.cd_ndevs || (xysc = xy_cd.cd_devs[unit]) == NULL) 953 return (-1); 954 955 part = DISKPART(dev); 956 omask = xysc->sc_dk.dk_openmask & (1 << part); 957 958 if (omask == 0 && xyopen(dev, 0, S_IFBLK, NULL) != 0) 959 return (-1); 960 961 /* do it */ 962 if (xysc->sc_dk.dk_label->d_partitions[part].p_fstype != FS_SWAP) 963 size = -1; /* only give valid size for swap partitions */ 964 else 965 size = xysc->sc_dk.dk_label->d_partitions[part].p_size * 966 (xysc->sc_dk.dk_label->d_secsize / DEV_BSIZE); 967 if (omask == 0 && xyclose(dev, 0, S_IFBLK, NULL) != 0) 968 return (-1); 969 return (size); 970 } 971 972 /* 973 * xystrategy: buffering system interface to xy. 974 */ 975 void 976 xystrategy(bp) 977 struct buf *bp; 978 979 { 980 struct xy_softc *xy; 981 int s, unit; 982 struct disklabel *lp; 983 daddr_t blkno; 984 985 unit = DISKUNIT(bp->b_dev); 986 987 /* check for live device */ 988 989 if (unit >= xy_cd.cd_ndevs || (xy = xy_cd.cd_devs[unit]) == 0 || 990 bp->b_blkno < 0 || 991 (bp->b_bcount % xy->sc_dk.dk_label->d_secsize) != 0) { 992 bp->b_error = EINVAL; 993 goto bad; 994 } 995 996 /* There should always be an open first. */ 997 if (xy->state == XY_DRIVE_UNKNOWN) { 998 bp->b_error = EIO; 999 goto bad; 1000 } 1001 if (xy->state != XY_DRIVE_ONLINE && DISKPART(bp->b_dev) != RAW_PART) { 1002 /* no I/O to unlabeled disks, unless raw partition */ 1003 bp->b_error = EIO; 1004 goto bad; 1005 } 1006 /* short circuit zero length request */ 1007 1008 if (bp->b_bcount == 0) 1009 goto done; 1010 1011 /* check bounds with label (disksubr.c). Determine the size of the 1012 * transfer, and make sure it is within the boundaries of the 1013 * partition. Adjust transfer if needed, and signal errors or early 1014 * completion. */ 1015 1016 lp = xy->sc_dk.dk_label; 1017 1018 if (bounds_check_with_label(bp, lp, 1019 (xy->flags & XY_WLABEL) != 0) <= 0) 1020 goto done; 1021 1022 /* 1023 * Now convert the block number to absolute and put it in 1024 * terms of the device's logical block size. 1025 */ 1026 blkno = bp->b_blkno / (lp->d_secsize / DEV_BSIZE); 1027 if (DISKPART(bp->b_dev) != RAW_PART) 1028 blkno += lp->d_partitions[DISKPART(bp->b_dev)].p_offset; 1029 1030 bp->b_rawblkno = blkno; 1031 1032 /* 1033 * now we know we have a valid buf structure that we need to do I/O 1034 * on. 1035 */ 1036 1037 s = splbio(); /* protect the queues */ 1038 1039 disksort_blkno(&xy->xyq, bp); /* XXX disksort_cylinder */ 1040 1041 /* start 'em up */ 1042 1043 xyc_start(xy->parent, NULL); 1044 1045 /* done! */ 1046 1047 splx(s); 1048 return; 1049 1050 bad: /* tells upper layers we have an error */ 1051 bp->b_flags |= B_ERROR; 1052 done: /* tells upper layers we are done with this 1053 * buf */ 1054 bp->b_resid = bp->b_bcount; 1055 biodone(bp); 1056 } 1057 /* 1058 * end of {b,c}devsw functions 1059 */ 1060 1061 /* 1062 * i n t e r r u p t f u n c t i o n 1063 * 1064 * xycintr: hardware interrupt. 1065 */ 1066 int 1067 xycintr(v) 1068 void *v; 1069 1070 { 1071 struct xyc_softc *xycsc = v; 1072 1073 /* kick the event counter */ 1074 xycsc->sc_intrcnt.ev_count++; 1075 1076 /* remove as many done IOPBs as possible */ 1077 xyc_remove_iorq(xycsc); 1078 1079 /* start any iorq's already waiting */ 1080 xyc_start(xycsc, NULL); 1081 1082 return (1); 1083 } 1084 /* 1085 * end of interrupt function 1086 */ 1087 1088 /* 1089 * i n t e r n a l f u n c t i o n s 1090 */ 1091 1092 /* 1093 * xyc_rqinit: fill out the fields of an I/O request 1094 */ 1095 1096 inline void 1097 xyc_rqinit(rq, xyc, xy, md, blk, cnt, db, bp) 1098 struct xy_iorq *rq; 1099 struct xyc_softc *xyc; 1100 struct xy_softc *xy; 1101 int md; 1102 u_long blk; 1103 int cnt; 1104 caddr_t db; 1105 struct buf *bp; 1106 { 1107 rq->xyc = xyc; 1108 rq->xy = xy; 1109 rq->ttl = XYC_MAXTTL + 10; 1110 rq->mode = md; 1111 rq->tries = rq->errno = rq->lasterror = 0; 1112 rq->blockno = blk; 1113 rq->sectcnt = cnt; 1114 rq->dbuf = rq->dbufbase = db; 1115 rq->buf = bp; 1116 } 1117 1118 /* 1119 * xyc_rqtopb: load up an IOPB based on an iorq 1120 */ 1121 1122 void 1123 xyc_rqtopb(iorq, iopb, cmd, subfun) 1124 struct xy_iorq *iorq; 1125 struct xy_iopb *iopb; 1126 int cmd, subfun; 1127 1128 { 1129 u_long block, dp; 1130 1131 /* normal IOPB case, standard stuff */ 1132 1133 /* chain bit handled later */ 1134 iopb->ien = (XY_STATE(iorq->mode) == XY_SUB_POLL) ? 0 : 1; 1135 iopb->com = cmd; 1136 iopb->errno = 0; 1137 iopb->errs = 0; 1138 iopb->done = 0; 1139 if (iorq->xy) { 1140 iopb->unit = iorq->xy->xy_drive; 1141 iopb->dt = iorq->xy->drive_type; 1142 } else { 1143 iopb->unit = 0; 1144 iopb->dt = 0; 1145 } 1146 block = iorq->blockno; 1147 if (iorq->xy == NULL || block == 0) { 1148 iopb->sect = iopb->head = iopb->cyl = 0; 1149 } else { 1150 iopb->sect = block % iorq->xy->nsect; 1151 block = block / iorq->xy->nsect; 1152 iopb->head = block % iorq->xy->nhead; 1153 block = block / iorq->xy->nhead; 1154 iopb->cyl = block; 1155 } 1156 iopb->scnt = iorq->sectcnt; 1157 if (iorq->dbuf == NULL) { 1158 iopb->dataa = 0; 1159 iopb->datar = 0; 1160 } else { 1161 dp = dvma_kvtopa(iorq->dbuf, iorq->xyc->bustype); 1162 iopb->dataa = (dp & 0xffff); 1163 iopb->datar = ((dp & 0xff0000) >> 16); 1164 } 1165 iopb->subfn = subfun; 1166 } 1167 1168 1169 /* 1170 * xyc_unbusy: wait for the xyc to go unbusy, or timeout. 1171 */ 1172 1173 int 1174 xyc_unbusy(xyc, del) 1175 1176 struct xyc *xyc; 1177 int del; 1178 1179 { 1180 while (del-- > 0) { 1181 if ((xyc->xyc_csr & XYC_GBSY) == 0) 1182 break; 1183 DELAY(1); 1184 } 1185 return(del == 0 ? XY_ERR_FAIL : XY_ERR_AOK); 1186 } 1187 1188 /* 1189 * xyc_cmd: front end for POLL'd and WAIT'd commands. Returns 0 or error. 1190 * note that NORM requests are handled separately. 1191 */ 1192 int 1193 xyc_cmd(xycsc, cmd, subfn, unit, block, scnt, dptr, fullmode) 1194 struct xyc_softc *xycsc; 1195 int cmd, subfn, unit, block, scnt; 1196 char *dptr; 1197 int fullmode; 1198 { 1199 struct xy_iorq *iorq = xycsc->ciorq; 1200 struct xy_iopb *iopb = xycsc->ciopb; 1201 int submode = XY_STATE(fullmode); 1202 1203 /* 1204 * is someone else using the control iopq wait for it if we can 1205 */ 1206 start: 1207 if (submode == XY_SUB_WAIT && XY_STATE(iorq->mode) != XY_SUB_FREE) { 1208 if (tsleep(iorq, PRIBIO, "xyc_cmd", 0)) 1209 return(XY_ERR_FAIL); 1210 goto start; 1211 } 1212 1213 if (XY_STATE(iorq->mode) != XY_SUB_FREE) { 1214 DELAY(1000000); /* XY_SUB_POLL: steal the iorq */ 1215 iorq->mode = XY_SUB_FREE; 1216 printf("%s: stole control iopb\n", xycsc->sc_dev.dv_xname); 1217 } 1218 1219 /* init iorq/iopb */ 1220 1221 xyc_rqinit(iorq, xycsc, 1222 (unit == XYC_NOUNIT) ? NULL : xycsc->sc_drives[unit], 1223 fullmode, block, scnt, dptr, NULL); 1224 1225 /* load IOPB from iorq */ 1226 1227 xyc_rqtopb(iorq, iopb, cmd, subfn); 1228 1229 /* submit it for processing */ 1230 1231 xyc_submit_iorq(xycsc, iorq, fullmode); /* error code will be in iorq */ 1232 1233 return(XY_ERR_AOK); 1234 } 1235 1236 /* 1237 * xyc_startbuf 1238 * start a buffer for running 1239 */ 1240 1241 int 1242 xyc_startbuf(xycsc, xysc, bp) 1243 struct xyc_softc *xycsc; 1244 struct xy_softc *xysc; 1245 struct buf *bp; 1246 1247 { 1248 int partno; 1249 struct xy_iorq *iorq; 1250 struct xy_iopb *iopb; 1251 u_long block; 1252 caddr_t dbuf; 1253 1254 iorq = xysc->xyrq; 1255 iopb = iorq->iopb; 1256 1257 /* get buf */ 1258 1259 if (bp == NULL) 1260 panic("xyc_startbuf null buf"); 1261 1262 partno = DISKPART(bp->b_dev); 1263 #ifdef XYC_DEBUG 1264 printf("xyc_startbuf: %s%c: %s block %d\n", xysc->sc_dev.dv_xname, 1265 'a' + partno, (bp->b_flags & B_READ) ? "read" : "write", bp->b_blkno); 1266 printf("xyc_startbuf: b_bcount %d, b_data 0x%x\n", 1267 bp->b_bcount, bp->b_data); 1268 #endif 1269 1270 /* 1271 * load request. 1272 * 1273 * also, note that there are two kinds of buf structures, those with 1274 * B_PHYS set and those without B_PHYS. if B_PHYS is set, then it is 1275 * a raw I/O (to a cdevsw) and we are doing I/O directly to the users' 1276 * buffer which has already been mapped into DVMA space. (Not on sun3) 1277 * However, if B_PHYS is not set, then the buffer is a normal system 1278 * buffer which does *not* live in DVMA space. In that case we call 1279 * dvma_mapin to map it into DVMA space so we can do the DMA to it. 1280 * 1281 * in cases where we do a dvma_mapin, note that iorq points to the buffer 1282 * as mapped into DVMA space, where as the bp->b_data points to its 1283 * non-DVMA mapping. 1284 * 1285 * XXX - On the sun3, B_PHYS does NOT mean the buffer is mapped 1286 * into dvma space, only that it was remapped into the kernel. 1287 * We ALWAYS have to remap the kernel buf into DVMA space. 1288 * (It is done inexpensively, using whole segments!) 1289 */ 1290 1291 block = bp->b_rawblkno; 1292 1293 dbuf = dvma_mapin(bp->b_data, bp->b_bcount, 0); 1294 if (dbuf == NULL) { /* out of DVMA space */ 1295 printf("%s: warning: out of DVMA space\n", 1296 xycsc->sc_dev.dv_xname); 1297 return (XY_ERR_FAIL); /* XXX: need some sort of 1298 * call-back scheme here? */ 1299 } 1300 1301 /* init iorq and load iopb from it */ 1302 1303 xyc_rqinit(iorq, xycsc, xysc, XY_SUB_NORM | XY_MODE_VERBO, block, 1304 bp->b_bcount / XYFM_BPS, dbuf, bp); 1305 1306 xyc_rqtopb(iorq, iopb, (bp->b_flags & B_READ) ? XYCMD_RD : XYCMD_WR, 0); 1307 1308 /* Instrumentation. */ 1309 disk_busy(&xysc->sc_dk); 1310 1311 return (XY_ERR_AOK); 1312 } 1313 1314 1315 /* 1316 * xyc_submit_iorq: submit an iorq for processing. returns XY_ERR_AOK 1317 * if ok. if it fail returns an error code. type is XY_SUB_*. 1318 * 1319 * note: caller frees iorq in all cases except NORM 1320 * 1321 * return value: 1322 * NORM: XY_AOK (req pending), XY_FAIL (couldn't submit request) 1323 * WAIT: XY_AOK (success), <error-code> (failed) 1324 * POLL: <same as WAIT> 1325 * NOQ : <same as NORM> 1326 * 1327 * there are three sources for i/o requests: 1328 * [1] xystrategy: normal block I/O, using "struct buf" system. 1329 * [2] autoconfig/crash dump: these are polled I/O requests, no interrupts. 1330 * [3] open/ioctl: these are I/O requests done in the context of a process, 1331 * and the process should block until they are done. 1332 * 1333 * software state is stored in the iorq structure. each iorq has an 1334 * iopb structure. the hardware understands the iopb structure. 1335 * every command must go through an iopb. a 450 handles one iopb at a 1336 * time, where as a 451 can take them in chains. [the 450 claims it 1337 * can handle chains, but is appears to be buggy...] iopb are allocated 1338 * in DVMA space at boot up time. each disk gets one iopb, and the 1339 * controller gets one (for POLL and WAIT commands). what happens if 1340 * the iopb is busy? for i/o type [1], the buffers are queued at the 1341 * "buff" layer and * picked up later by the interrupt routine. for case 1342 * [2] we can only be blocked if there is a WAIT type I/O request being 1343 * run. since this can only happen when we are crashing, we wait a sec 1344 * and then steal the IOPB. for case [3] the process can sleep 1345 * on the iorq free list until some iopbs are avaliable. 1346 */ 1347 1348 1349 int 1350 xyc_submit_iorq(xycsc, iorq, type) 1351 struct xyc_softc *xycsc; 1352 struct xy_iorq *iorq; 1353 int type; 1354 1355 { 1356 struct xy_iopb *iopb; 1357 u_long iopbaddr; 1358 1359 #ifdef XYC_DEBUG 1360 printf("xyc_submit_iorq(%s, addr=0x%x, type=%d)\n", 1361 xycsc->sc_dev.dv_xname, iorq, type); 1362 #endif 1363 1364 /* first check and see if controller is busy */ 1365 if ((xycsc->xyc->xyc_csr & XYC_GBSY) != 0) { 1366 #ifdef XYC_DEBUG 1367 printf("xyc_submit_iorq: XYC not ready (BUSY)\n"); 1368 #endif 1369 if (type == XY_SUB_NOQ) 1370 return (XY_ERR_FAIL); /* failed */ 1371 switch (type) { 1372 case XY_SUB_NORM: 1373 return XY_ERR_AOK; /* success */ 1374 case XY_SUB_WAIT: 1375 while (iorq->iopb->done == 0) { 1376 (void) tsleep(iorq, PRIBIO, "xyciorq", 0); 1377 } 1378 return (iorq->errno); 1379 case XY_SUB_POLL: /* steal controller */ 1380 iopbaddr = xycsc->xyc->xyc_rsetup; /* RESET */ 1381 if (xyc_unbusy(xycsc->xyc,XYC_RESETUSEC) == XY_ERR_FAIL) 1382 panic("xyc_submit_iorq: stuck xyc"); 1383 printf("%s: stole controller\n", 1384 xycsc->sc_dev.dv_xname); 1385 break; 1386 default: 1387 panic("xyc_submit_iorq adding"); 1388 } 1389 } 1390 1391 iopb = xyc_chain(xycsc, iorq); /* build chain */ 1392 if (iopb == NULL) { /* nothing doing? */ 1393 if (type == XY_SUB_NORM || type == XY_SUB_NOQ) 1394 return(XY_ERR_AOK); 1395 panic("xyc_submit_iorq: xyc_chain failed!\n"); 1396 } 1397 iopbaddr = dvma_kvtopa(iopb, xycsc->bustype); 1398 1399 XYC_GO(xycsc->xyc, iopbaddr); 1400 1401 /* command now running, wrap it up */ 1402 switch (type) { 1403 case XY_SUB_NORM: 1404 case XY_SUB_NOQ: 1405 return (XY_ERR_AOK); /* success */ 1406 case XY_SUB_WAIT: 1407 while (iorq->iopb->done == 0) { 1408 (void) tsleep(iorq, PRIBIO, "xyciorq", 0); 1409 } 1410 return (iorq->errno); 1411 case XY_SUB_POLL: 1412 return (xyc_piodriver(xycsc, iorq)); 1413 default: 1414 panic("xyc_submit_iorq wrap up"); 1415 } 1416 panic("xyc_submit_iorq"); 1417 return 0; /* not reached */ 1418 } 1419 1420 1421 /* 1422 * xyc_chain: build a chain. return dvma address of first element in 1423 * the chain. iorq != NULL: means we only want that item on the chain. 1424 */ 1425 1426 struct xy_iopb * 1427 xyc_chain(xycsc, iorq) 1428 struct xyc_softc *xycsc; 1429 struct xy_iorq *iorq; 1430 { 1431 int togo, chain, hand; 1432 struct xy_iopb *iopb, *prev_iopb; 1433 bzero(xycsc->xy_chain, sizeof(xycsc->xy_chain)); 1434 1435 /* 1436 * promote control IOPB to the top 1437 */ 1438 if (iorq == NULL) { 1439 if ((XY_STATE(xycsc->reqs[XYC_CTLIOPB].mode) == XY_SUB_POLL || 1440 XY_STATE(xycsc->reqs[XYC_CTLIOPB].mode) == XY_SUB_WAIT) && 1441 xycsc->iopbase[XYC_CTLIOPB].done == 0) 1442 iorq = &xycsc->reqs[XYC_CTLIOPB]; 1443 } 1444 /* 1445 * special case: if iorq != NULL then we have a POLL or WAIT request. 1446 * we let these take priority and do them first. 1447 */ 1448 if (iorq) { 1449 xycsc->xy_chain[0] = iorq; 1450 iorq->iopb->chen = 0; 1451 return(iorq->iopb); 1452 } 1453 1454 /* 1455 * NORM case: do round robin and maybe chain (if allowed and possible) 1456 */ 1457 1458 chain = 0; 1459 hand = xycsc->xy_hand; 1460 xycsc->xy_hand = (xycsc->xy_hand + 1) % XYC_MAXIOPB; 1461 1462 for (togo = XYC_MAXIOPB ; 1463 togo > 0 ; 1464 togo--, hand = (hand + 1) % XYC_MAXIOPB) 1465 { 1466 1467 if (XY_STATE(xycsc->reqs[hand].mode) != XY_SUB_NORM || 1468 xycsc->iopbase[hand].done) 1469 continue; /* not ready-for-i/o */ 1470 1471 xycsc->xy_chain[chain] = &xycsc->reqs[hand]; 1472 iopb = xycsc->xy_chain[chain]->iopb; 1473 iopb->chen = 0; 1474 if (chain != 0) { /* adding a link to a chain? */ 1475 prev_iopb = xycsc->xy_chain[chain-1]->iopb; 1476 prev_iopb->chen = 1; 1477 prev_iopb->nxtiopb = 0xffff & 1478 dvma_kvtopa(iopb, xycsc->bustype); 1479 } else { /* head of chain */ 1480 iorq = xycsc->xy_chain[chain]; 1481 } 1482 chain++; 1483 if (xycsc->no_ols) break; /* quit if chaining dis-allowed */ 1484 } 1485 return(iorq ? iorq->iopb : NULL); 1486 } 1487 1488 /* 1489 * xyc_piodriver 1490 * 1491 * programmed i/o driver. this function takes over the computer 1492 * and drains off the polled i/o request. it returns the status of the iorq 1493 * the caller is interesting in. 1494 */ 1495 int 1496 xyc_piodriver(xycsc, iorq) 1497 struct xyc_softc *xycsc; 1498 struct xy_iorq *iorq; 1499 1500 { 1501 int nreset = 0; 1502 int retval = 0; 1503 u_long res; 1504 1505 #ifdef XYC_DEBUG 1506 printf("xyc_piodriver(%s, 0x%x)\n", xycsc->sc_dev.dv_xname, iorq); 1507 #endif 1508 1509 while (iorq->iopb->done == 0) { 1510 1511 res = xyc_unbusy(xycsc->xyc, XYC_MAXTIME); 1512 1513 /* we expect some progress soon */ 1514 if (res == XY_ERR_FAIL && nreset >= 2) { 1515 xyc_reset(xycsc, 0, XY_RSET_ALL, XY_ERR_FAIL, 0); 1516 #ifdef XYC_DEBUG 1517 printf("xyc_piodriver: timeout\n"); 1518 #endif 1519 return (XY_ERR_FAIL); 1520 } 1521 if (res == XY_ERR_FAIL) { 1522 if (xyc_reset(xycsc, 0, 1523 (nreset++ == 0) ? XY_RSET_NONE : iorq, 1524 XY_ERR_FAIL, 1525 0) == XY_ERR_FAIL) 1526 return (XY_ERR_FAIL); /* flushes all but POLL 1527 * requests, resets */ 1528 continue; 1529 } 1530 1531 xyc_remove_iorq(xycsc); /* may resubmit request */ 1532 1533 if (iorq->iopb->done == 0) 1534 xyc_start(xycsc, iorq); 1535 } 1536 1537 /* get return value */ 1538 1539 retval = iorq->errno; 1540 1541 #ifdef XYC_DEBUG 1542 printf("xyc_piodriver: done, retval = 0x%x (%s)\n", 1543 iorq->errno, xyc_e2str(iorq->errno)); 1544 #endif 1545 1546 /* start up any bufs that have queued */ 1547 1548 xyc_start(xycsc, NULL); 1549 1550 return (retval); 1551 } 1552 1553 /* 1554 * xyc_xyreset: reset one drive. NOTE: assumes xyc was just reset. 1555 * we steal iopb[XYC_CTLIOPB] for this, but we put it back when we are done. 1556 */ 1557 void 1558 xyc_xyreset(xycsc, xysc) 1559 struct xyc_softc *xycsc; 1560 struct xy_softc *xysc; 1561 1562 { 1563 struct xy_iopb tmpiopb; 1564 u_long addr; 1565 int del; 1566 bcopy(xycsc->ciopb, &tmpiopb, sizeof(tmpiopb)); 1567 xycsc->ciopb->chen = xycsc->ciopb->done = xycsc->ciopb->errs = 0; 1568 xycsc->ciopb->ien = 0; 1569 xycsc->ciopb->com = XYCMD_RST; 1570 xycsc->ciopb->unit = xysc->xy_drive; 1571 addr = dvma_kvtopa(xycsc->ciopb, xycsc->bustype); 1572 1573 XYC_GO(xycsc->xyc, addr); 1574 1575 del = XYC_RESETUSEC; 1576 while (del > 0) { 1577 if ((xycsc->xyc->xyc_csr & XYC_GBSY) == 0) break; 1578 DELAY(1); 1579 del--; 1580 } 1581 1582 if (del <= 0 || xycsc->ciopb->errs) { 1583 printf("%s: off-line: %s\n", xycsc->sc_dev.dv_xname, 1584 xyc_e2str(xycsc->ciopb->errno)); 1585 del = xycsc->xyc->xyc_rsetup; 1586 if (xyc_unbusy(xycsc->xyc, XYC_RESETUSEC) == XY_ERR_FAIL) 1587 panic("xyc_reset"); 1588 } else { 1589 xycsc->xyc->xyc_csr = XYC_IPND; /* clear IPND */ 1590 } 1591 bcopy(&tmpiopb, xycsc->ciopb, sizeof(tmpiopb)); 1592 } 1593 1594 1595 /* 1596 * xyc_reset: reset everything: requests are marked as errors except 1597 * a polled request (which is resubmitted) 1598 */ 1599 int 1600 xyc_reset(xycsc, quiet, blastmode, error, xysc) 1601 struct xyc_softc *xycsc; 1602 int quiet, error; 1603 struct xy_iorq *blastmode; 1604 struct xy_softc *xysc; 1605 1606 { 1607 int del = 0, lcv, retval = XY_ERR_AOK; 1608 struct xy_iorq *iorq; 1609 1610 /* soft reset hardware */ 1611 1612 if (!quiet) 1613 printf("%s: soft reset\n", xycsc->sc_dev.dv_xname); 1614 del = xycsc->xyc->xyc_rsetup; 1615 del = xyc_unbusy(xycsc->xyc, XYC_RESETUSEC); 1616 if (del == XY_ERR_FAIL) { 1617 blastmode = XY_RSET_ALL; /* dead, flush all requests */ 1618 retval = XY_ERR_FAIL; 1619 } 1620 if (xysc) 1621 xyc_xyreset(xycsc, xysc); 1622 1623 /* fix queues based on "blast-mode" */ 1624 1625 for (lcv = 0; lcv < XYC_MAXIOPB; lcv++) { 1626 iorq = &xycsc->reqs[lcv]; 1627 1628 if (XY_STATE(iorq->mode) != XY_SUB_POLL && 1629 XY_STATE(iorq->mode) != XY_SUB_WAIT && 1630 XY_STATE(iorq->mode) != XY_SUB_NORM) 1631 /* is it active? */ 1632 continue; 1633 1634 if (blastmode == XY_RSET_ALL || 1635 blastmode != iorq) { 1636 /* failed */ 1637 iorq->errno = error; 1638 xycsc->iopbase[lcv].done = xycsc->iopbase[lcv].errs = 1; 1639 switch (XY_STATE(iorq->mode)) { 1640 case XY_SUB_NORM: 1641 iorq->buf->b_error = EIO; 1642 iorq->buf->b_flags |= B_ERROR; 1643 iorq->buf->b_resid = 1644 iorq->sectcnt * XYFM_BPS; 1645 /* Sun3: map/unmap regardless of B_PHYS */ 1646 dvma_mapout(iorq->dbufbase, 1647 iorq->buf->b_bcount); 1648 BUFQ_REMOVE(&iorq->xy->xyq, iorq->buf); 1649 disk_unbusy(&iorq->xy->sc_dk, 1650 (iorq->buf->b_bcount - 1651 iorq->buf->b_resid)); 1652 biodone(iorq->buf); 1653 iorq->mode = XY_SUB_FREE; 1654 break; 1655 case XY_SUB_WAIT: 1656 wakeup(iorq); 1657 case XY_SUB_POLL: 1658 iorq->mode = 1659 XY_NEWSTATE(iorq->mode, XY_SUB_DONE); 1660 break; 1661 } 1662 1663 } else { 1664 1665 /* resubmit, no need to do anything here */ 1666 } 1667 } 1668 1669 /* 1670 * now, if stuff is waiting, start it. 1671 * since we just reset it should go 1672 */ 1673 xyc_start(xycsc, NULL); 1674 1675 return (retval); 1676 } 1677 1678 /* 1679 * xyc_start: start waiting buffers 1680 */ 1681 1682 void 1683 xyc_start(xycsc, iorq) 1684 struct xyc_softc *xycsc; 1685 struct xy_iorq *iorq; 1686 1687 { 1688 int lcv; 1689 struct xy_softc *xy; 1690 1691 if (iorq == NULL) { 1692 for (lcv = 0; lcv < XYC_MAXDEV ; lcv++) { 1693 if ((xy = xycsc->sc_drives[lcv]) == NULL) continue; 1694 if (BUFQ_FIRST(&xy->xyq) == NULL) continue; 1695 if (xy->xyrq->mode != XY_SUB_FREE) continue; 1696 xyc_startbuf(xycsc, xy, BUFQ_FIRST(&xy->xyq)); 1697 } 1698 } 1699 xyc_submit_iorq(xycsc, iorq, XY_SUB_NOQ); 1700 } 1701 1702 /* 1703 * xyc_remove_iorq: remove "done" IOPB's. 1704 */ 1705 1706 int 1707 xyc_remove_iorq(xycsc) 1708 struct xyc_softc *xycsc; 1709 1710 { 1711 int errno, rq, comm, errs; 1712 struct xyc *xyc = xycsc->xyc; 1713 u_long addr; 1714 struct xy_iopb *iopb; 1715 struct xy_iorq *iorq; 1716 struct buf *bp; 1717 1718 if (xyc->xyc_csr & XYC_DERR) { 1719 /* 1720 * DOUBLE ERROR: should never happen under normal use. This 1721 * error is so bad, you can't even tell which IOPB is bad, so 1722 * we dump them all. 1723 */ 1724 errno = XY_ERR_DERR; 1725 printf("%s: DOUBLE ERROR!\n", xycsc->sc_dev.dv_xname); 1726 if (xyc_reset(xycsc, 0, XY_RSET_ALL, errno, 0) != XY_ERR_AOK) { 1727 printf("%s: soft reset failed!\n", 1728 xycsc->sc_dev.dv_xname); 1729 panic("xyc_remove_iorq: controller DEAD"); 1730 } 1731 return (XY_ERR_AOK); 1732 } 1733 1734 /* 1735 * get iopb that is done, loop down the chain 1736 */ 1737 1738 if (xyc->xyc_csr & XYC_ERR) { 1739 xyc->xyc_csr = XYC_ERR; /* clear error condition */ 1740 } 1741 if (xyc->xyc_csr & XYC_IPND) { 1742 xyc->xyc_csr = XYC_IPND; /* clear interrupt */ 1743 } 1744 1745 for (rq = 0; rq < XYC_MAXIOPB; rq++) { 1746 iorq = xycsc->xy_chain[rq]; 1747 if (iorq == NULL) break; /* done ! */ 1748 if (iorq->mode == 0 || XY_STATE(iorq->mode) == XY_SUB_DONE) 1749 continue; /* free, or done */ 1750 iopb = iorq->iopb; 1751 if (iopb->done == 0) 1752 continue; /* not done yet */ 1753 1754 comm = iopb->com; 1755 errs = iopb->errs; 1756 1757 if (errs) 1758 iorq->errno = iopb->errno; 1759 else 1760 iorq->errno = 0; 1761 1762 /* handle non-fatal errors */ 1763 1764 if (errs && 1765 xyc_error(xycsc, iorq, iopb, comm) == XY_ERR_AOK) 1766 continue; /* AOK: we resubmitted it */ 1767 1768 1769 /* this iorq is now done (hasn't been restarted or anything) */ 1770 1771 if ((iorq->mode & XY_MODE_VERBO) && iorq->lasterror) 1772 xyc_perror(iorq, iopb, 0); 1773 1774 /* now, if read/write check to make sure we got all the data 1775 * we needed. (this may not be the case if we got an error in 1776 * the middle of a multisector request). */ 1777 1778 if ((iorq->mode & XY_MODE_B144) != 0 && errs == 0 && 1779 (comm == XYCMD_RD || comm == XYCMD_WR)) { 1780 /* we just successfully processed a bad144 sector 1781 * note: if we are in bad 144 mode, the pointers have 1782 * been advanced already (see above) and are pointing 1783 * at the bad144 sector. to exit bad144 mode, we 1784 * must advance the pointers 1 sector and issue a new 1785 * request if there are still sectors left to process 1786 * 1787 */ 1788 XYC_ADVANCE(iorq, 1); /* advance 1 sector */ 1789 1790 /* exit b144 mode */ 1791 iorq->mode = iorq->mode & (~XY_MODE_B144); 1792 1793 if (iorq->sectcnt) { /* more to go! */ 1794 iorq->lasterror = iorq->errno = iopb->errno = 0; 1795 iopb->errs = iopb->done = 0; 1796 iorq->tries = 0; 1797 iopb->scnt = iorq->sectcnt; 1798 iopb->cyl = iorq->blockno / 1799 iorq->xy->sectpercyl; 1800 iopb->head = 1801 (iorq->blockno / iorq->xy->nhead) % 1802 iorq->xy->nhead; 1803 iopb->sect = iorq->blockno % XYFM_BPS; 1804 addr = dvma_kvtopa(iorq->dbuf, xycsc->bustype); 1805 iopb->dataa = (addr & 0xffff); 1806 iopb->datar = ((addr & 0xff0000) >> 16); 1807 /* will resubit at end */ 1808 continue; 1809 } 1810 } 1811 /* final cleanup, totally done with this request */ 1812 1813 switch (XY_STATE(iorq->mode)) { 1814 case XY_SUB_NORM: 1815 bp = iorq->buf; 1816 if (errs) { 1817 bp->b_error = EIO; 1818 bp->b_flags |= B_ERROR; 1819 bp->b_resid = iorq->sectcnt * XYFM_BPS; 1820 } else { 1821 bp->b_resid = 0; /* done */ 1822 } 1823 /* Sun3: map/unmap regardless of B_PHYS */ 1824 dvma_mapout(iorq->dbufbase, 1825 iorq->buf->b_bcount); 1826 BUFQ_REMOVE(&iorq->xy->xyq, bp); 1827 disk_unbusy(&iorq->xy->sc_dk, 1828 (bp->b_bcount - bp->b_resid)); 1829 iorq->mode = XY_SUB_FREE; 1830 biodone(bp); 1831 break; 1832 case XY_SUB_WAIT: 1833 iorq->mode = XY_NEWSTATE(iorq->mode, XY_SUB_DONE); 1834 wakeup(iorq); 1835 break; 1836 case XY_SUB_POLL: 1837 iorq->mode = XY_NEWSTATE(iorq->mode, XY_SUB_DONE); 1838 break; 1839 } 1840 } 1841 1842 return (XY_ERR_AOK); 1843 } 1844 1845 /* 1846 * xyc_perror: print error. 1847 * - if still_trying is true: we got an error, retried and got a 1848 * different error. in that case lasterror is the old error, 1849 * and errno is the new one. 1850 * - if still_trying is not true, then if we ever had an error it 1851 * is in lasterror. also, if iorq->errno == 0, then we recovered 1852 * from that error (otherwise iorq->errno == iorq->lasterror). 1853 */ 1854 void 1855 xyc_perror(iorq, iopb, still_trying) 1856 struct xy_iorq *iorq; 1857 struct xy_iopb *iopb; 1858 int still_trying; 1859 1860 { 1861 1862 int error = iorq->lasterror; 1863 1864 printf("%s", (iorq->xy) ? iorq->xy->sc_dev.dv_xname 1865 : iorq->xyc->sc_dev.dv_xname); 1866 if (iorq->buf) 1867 printf("%c: ", 'a' + DISKPART(iorq->buf->b_dev)); 1868 if (iopb->com == XYCMD_RD || iopb->com == XYCMD_WR) 1869 printf("%s %d/%d/%d: ", 1870 (iopb->com == XYCMD_RD) ? "read" : "write", 1871 iopb->cyl, iopb->head, iopb->sect); 1872 printf("%s", xyc_e2str(error)); 1873 1874 if (still_trying) 1875 printf(" [still trying, new error=%s]", xyc_e2str(iorq->errno)); 1876 else 1877 if (iorq->errno == 0) 1878 printf(" [recovered in %d tries]", iorq->tries); 1879 1880 printf("\n"); 1881 } 1882 1883 /* 1884 * xyc_error: non-fatal error encountered... recover. 1885 * return AOK if resubmitted, return FAIL if this iopb is done 1886 */ 1887 int 1888 xyc_error(xycsc, iorq, iopb, comm) 1889 struct xyc_softc *xycsc; 1890 struct xy_iorq *iorq; 1891 struct xy_iopb *iopb; 1892 int comm; 1893 1894 { 1895 int errno = iorq->errno; 1896 int erract = xyc_entoact(errno); 1897 int oldmode, advance, i; 1898 1899 if (erract == XY_ERA_RSET) { /* some errors require a reset */ 1900 oldmode = iorq->mode; 1901 iorq->mode = XY_SUB_DONE | (~XY_SUB_MASK & oldmode); 1902 /* make xyc_start ignore us */ 1903 xyc_reset(xycsc, 1, XY_RSET_NONE, errno, iorq->xy); 1904 iorq->mode = oldmode; 1905 } 1906 /* check for read/write to a sector in bad144 table if bad: redirect 1907 * request to bad144 area */ 1908 1909 if ((comm == XYCMD_RD || comm == XYCMD_WR) && 1910 (iorq->mode & XY_MODE_B144) == 0) { 1911 advance = iorq->sectcnt - iopb->scnt; 1912 XYC_ADVANCE(iorq, advance); 1913 if ((i = isbad(&iorq->xy->dkb, iorq->blockno / iorq->xy->sectpercyl, 1914 (iorq->blockno / iorq->xy->nsect) % iorq->xy->nhead, 1915 iorq->blockno % iorq->xy->nsect)) != -1) { 1916 iorq->mode |= XY_MODE_B144; /* enter bad144 mode & 1917 * redirect */ 1918 iopb->errno = iopb->done = iopb->errs = 0; 1919 iopb->scnt = 1; 1920 iopb->cyl = (iorq->xy->ncyl + iorq->xy->acyl) - 2; 1921 /* second to last acyl */ 1922 i = iorq->xy->sectpercyl - 1 - i; /* follow bad144 1923 * standard */ 1924 iopb->head = i / iorq->xy->nhead; 1925 iopb->sect = i % iorq->xy->nhead; 1926 /* will resubmit when we come out of remove_iorq */ 1927 return (XY_ERR_AOK); /* recovered! */ 1928 } 1929 } 1930 1931 /* 1932 * it isn't a bad144 sector, must be real error! see if we can retry 1933 * it? 1934 */ 1935 if ((iorq->mode & XY_MODE_VERBO) && iorq->lasterror) 1936 xyc_perror(iorq, iopb, 1); /* inform of error state 1937 * change */ 1938 iorq->lasterror = errno; 1939 1940 if ((erract == XY_ERA_RSET || erract == XY_ERA_HARD) 1941 && iorq->tries < XYC_MAXTRIES) { /* retry? */ 1942 iorq->tries++; 1943 iorq->errno = iopb->errno = iopb->done = iopb->errs = 0; 1944 /* will resubmit at end of remove_iorq */ 1945 return (XY_ERR_AOK); /* recovered! */ 1946 } 1947 1948 /* failed to recover from this error */ 1949 return (XY_ERR_FAIL); 1950 } 1951 1952 /* 1953 * xyc_tick: make sure xy is still alive and ticking (err, kicking). 1954 */ 1955 void 1956 xyc_tick(arg) 1957 void *arg; 1958 1959 { 1960 struct xyc_softc *xycsc = arg; 1961 int lcv, s, reset = 0; 1962 1963 /* reduce ttl for each request if one goes to zero, reset xyc */ 1964 s = splbio(); 1965 for (lcv = 0; lcv < XYC_MAXIOPB; lcv++) { 1966 if (xycsc->reqs[lcv].mode == 0 || 1967 XY_STATE(xycsc->reqs[lcv].mode) == XY_SUB_DONE) 1968 continue; 1969 xycsc->reqs[lcv].ttl--; 1970 if (xycsc->reqs[lcv].ttl == 0) 1971 reset = 1; 1972 } 1973 if (reset) { 1974 printf("%s: watchdog timeout\n", xycsc->sc_dev.dv_xname); 1975 xyc_reset(xycsc, 0, XY_RSET_NONE, XY_ERR_FAIL, NULL); 1976 } 1977 splx(s); 1978 1979 /* until next time */ 1980 1981 callout_reset(&xycsc->sc_tick_ch, XYC_TICKCNT, xyc_tick, xycsc); 1982 } 1983 1984 /* 1985 * xyc_ioctlcmd: this function provides a user level interface to the 1986 * controller via ioctl. this allows "format" programs to be written 1987 * in user code, and is also useful for some debugging. we return 1988 * an error code. called at user priority. 1989 * 1990 * XXX missing a few commands (see the 7053 driver for ideas) 1991 */ 1992 int 1993 xyc_ioctlcmd(xy, dev, xio) 1994 struct xy_softc *xy; 1995 dev_t dev; 1996 struct xd_iocmd *xio; 1997 1998 { 1999 int s, err, rqno; 2000 void * dvmabuf = NULL; 2001 struct xyc_softc *xycsc; 2002 2003 /* check sanity of requested command */ 2004 2005 switch (xio->cmd) { 2006 2007 case XYCMD_NOP: /* no op: everything should be zero */ 2008 if (xio->subfn || xio->dptr || xio->dlen || 2009 xio->block || xio->sectcnt) 2010 return (EINVAL); 2011 break; 2012 2013 case XYCMD_RD: /* read / write sectors (up to XD_IOCMD_MAXS) */ 2014 case XYCMD_WR: 2015 if (xio->subfn || xio->sectcnt > XD_IOCMD_MAXS || 2016 xio->sectcnt * XYFM_BPS != xio->dlen || xio->dptr == NULL) 2017 return (EINVAL); 2018 break; 2019 2020 case XYCMD_SK: /* seek: doesn't seem useful to export this */ 2021 return (EINVAL); 2022 2023 break; 2024 2025 default: 2026 return (EINVAL);/* ??? */ 2027 } 2028 2029 /* create DVMA buffer for request if needed */ 2030 2031 if (xio->dlen) { 2032 dvmabuf = dvma_malloc(xio->dlen); 2033 if (xio->cmd == XYCMD_WR) { 2034 err = copyin(xio->dptr, dvmabuf, xio->dlen); 2035 if (err) { 2036 dvma_free(dvmabuf, xio->dlen); 2037 return (err); 2038 } 2039 } 2040 } 2041 /* do it! */ 2042 2043 err = 0; 2044 xycsc = xy->parent; 2045 s = splbio(); 2046 rqno = xyc_cmd(xycsc, xio->cmd, xio->subfn, xy->xy_drive, xio->block, 2047 xio->sectcnt, dvmabuf, XY_SUB_WAIT); 2048 if (rqno == XY_ERR_FAIL) { 2049 err = EIO; 2050 goto done; 2051 } 2052 xio->errno = xycsc->ciorq->errno; 2053 xio->tries = xycsc->ciorq->tries; 2054 XYC_DONE(xycsc, err); 2055 2056 if (xio->cmd == XYCMD_RD) 2057 err = copyout(dvmabuf, xio->dptr, xio->dlen); 2058 2059 done: 2060 splx(s); 2061 if (dvmabuf) 2062 dvma_free(dvmabuf, xio->dlen); 2063 return (err); 2064 } 2065 2066 /* 2067 * xyc_e2str: convert error code number into an error string 2068 */ 2069 char * 2070 xyc_e2str(no) 2071 int no; 2072 { 2073 switch (no) { 2074 case XY_ERR_FAIL: 2075 return ("Software fatal error"); 2076 case XY_ERR_DERR: 2077 return ("DOUBLE ERROR"); 2078 case XY_ERR_AOK: 2079 return ("Successful completion"); 2080 case XY_ERR_IPEN: 2081 return("Interrupt pending"); 2082 case XY_ERR_BCFL: 2083 return("Busy conflict"); 2084 case XY_ERR_TIMO: 2085 return("Operation timeout"); 2086 case XY_ERR_NHDR: 2087 return("Header not found"); 2088 case XY_ERR_HARD: 2089 return("Hard ECC error"); 2090 case XY_ERR_ICYL: 2091 return("Illegal cylinder address"); 2092 case XY_ERR_ISEC: 2093 return("Illegal sector address"); 2094 case XY_ERR_SMAL: 2095 return("Last sector too small"); 2096 case XY_ERR_SACK: 2097 return("Slave ACK error (non-existent memory)"); 2098 case XY_ERR_CHER: 2099 return("Cylinder and head/header error"); 2100 case XY_ERR_SRTR: 2101 return("Auto-seek retry successful"); 2102 case XY_ERR_WPRO: 2103 return("Write-protect error"); 2104 case XY_ERR_UIMP: 2105 return("Unimplemented command"); 2106 case XY_ERR_DNRY: 2107 return("Drive not ready"); 2108 case XY_ERR_SZER: 2109 return("Sector count zero"); 2110 case XY_ERR_DFLT: 2111 return("Drive faulted"); 2112 case XY_ERR_ISSZ: 2113 return("Illegal sector size"); 2114 case XY_ERR_SLTA: 2115 return("Self test A"); 2116 case XY_ERR_SLTB: 2117 return("Self test B"); 2118 case XY_ERR_SLTC: 2119 return("Self test C"); 2120 case XY_ERR_SOFT: 2121 return("Soft ECC error"); 2122 case XY_ERR_SFOK: 2123 return("Soft ECC error recovered"); 2124 case XY_ERR_IHED: 2125 return("Illegal head"); 2126 case XY_ERR_DSEQ: 2127 return("Disk sequencer error"); 2128 case XY_ERR_SEEK: 2129 return("Seek error"); 2130 default: 2131 return ("Unknown error"); 2132 } 2133 } 2134 2135 int 2136 xyc_entoact(errno) 2137 2138 int errno; 2139 2140 { 2141 switch (errno) { 2142 case XY_ERR_FAIL: case XY_ERR_DERR: case XY_ERR_IPEN: 2143 case XY_ERR_BCFL: case XY_ERR_ICYL: case XY_ERR_ISEC: 2144 case XY_ERR_UIMP: case XY_ERR_SZER: case XY_ERR_ISSZ: 2145 case XY_ERR_SLTA: case XY_ERR_SLTB: case XY_ERR_SLTC: 2146 case XY_ERR_IHED: case XY_ERR_SACK: case XY_ERR_SMAL: 2147 2148 return(XY_ERA_PROG); /* program error ! */ 2149 2150 case XY_ERR_TIMO: case XY_ERR_NHDR: case XY_ERR_HARD: 2151 case XY_ERR_DNRY: case XY_ERR_CHER: case XY_ERR_SEEK: 2152 case XY_ERR_SOFT: 2153 2154 return(XY_ERA_HARD); /* hard error, retry */ 2155 2156 case XY_ERR_DFLT: case XY_ERR_DSEQ: 2157 2158 return(XY_ERA_RSET); /* hard error reset */ 2159 2160 case XY_ERR_SRTR: case XY_ERR_SFOK: case XY_ERR_AOK: 2161 2162 return(XY_ERA_SOFT); /* an FYI error */ 2163 2164 case XY_ERR_WPRO: 2165 2166 return(XY_ERA_WPRO); /* write protect */ 2167 } 2168 2169 return(XY_ERA_PROG); /* ??? */ 2170 } 2171
Indexes created Mon Sep 29 21:09:56 GMT 2025