locore.s revision 1.69.4.1
1 /* $NetBSD: locore.s,v 1.69.4.1 2024/06/27 19:27:28 martin Exp $ */ 2 3 /* 4 * Copyright (c) 1988 University of Utah. 5 * Copyright (c) 1980, 1990, 1993 6 * The Regents of the University of California. All rights reserved. 7 * 8 * This code is derived from software contributed to Berkeley by 9 * the Systems Programming Group of the University of Utah Computer 10 * Science Department. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. Neither the name of the University nor the names of its contributors 21 * may be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 34 * SUCH DAMAGE. 35 * 36 * from: Utah $Hdr: locore.s 1.66 92/12/22$ 37 * @(#)locore.s 8.6 (Berkeley) 5/27/94 38 */ 39 40 #include "opt_compat_netbsd.h" 41 #include "opt_compat_sunos.h" 42 #include "opt_kgdb.h" 43 #include "opt_lockdebug.h" 44 45 #include "assym.h" 46 #include <machine/asm.h> 47 #include <machine/trap.h> 48 49 | Remember this is a fun project! 50 51 .data 52 GLOBAL(mon_crp) 53 .long 0,0 54 55 | This is for kvm_mkdb, and should be the address of the beginning 56 | of the kernel text segment (not necessarily the same as kernbase). 57 .text 58 GLOBAL(kernel_text) 59 60 | This is the entry point, as well as the end of the temporary stack 61 | used during process switch (one 8K page ending at start) 62 ASGLOBAL(tmpstk) 63 ASGLOBAL(start) 64 65 | The first step, after disabling interrupts, is to map enough of the kernel 66 | into high virtual address space so that we can use position dependent code. 67 | This is a tricky task on the sun3x because the MMU is already enabled and 68 | the ROM monitor provides no indication of where the root MMU table is mapped. 69 | Therefore we must use one of the 68030's 'transparent translation' registers 70 | to define a range in the address space where the MMU translation is 71 | turned off. Once this is complete we can modify the MMU table directly 72 | without the need for it to be mapped into virtual memory. 73 | All code must be position independent until otherwise noted, as the 74 | boot loader has loaded us into low memory but all the symbols in this 75 | code have been linked high. 76 movw #PSL_HIGHIPL,%sr | no interrupts 77 movl #KERNBASE3X,%a5 | for vtop conversion 78 lea _C_LABEL(mon_crp),%a0 | where to store the CRP 79 subl %a5,%a0 80 | Note: borrowing mon_crp for tt0 setup... 81 movl #0x3F8107,%a0@ | map the low 1GB v=p with the 82 .long 0xf0100800 | transparent translation reg0 83 | [ pmove a0@, tt0 ] 84 | In order to map the kernel into high memory we will copy the root table 85 | entry which maps the 16 megabytes of memory starting at 0x0 into the 86 | entry which maps the 16 megabytes starting at KERNBASE. 87 pmove %crp,%a0@ | Get monitor CPU root pointer 88 movl %a0@(4),%a1 | 2nd word is PA of level A table 89 90 movl %a1,%a0 | compute the descriptor address 91 addl #0x3e0,%a1 | for VA starting at KERNBASE 92 movl %a0@,%a1@ | copy descriptor type 93 movl %a0@(4),%a1@(4) | copy physical address 94 95 | Kernel is now double mapped at zero and KERNBASE. 96 | Force a long jump to the relocated code (high VA). 97 movl #IC_CLEAR,%d0 | Flush the I-cache 98 movc %d0,%cacr 99 jmp L_high_code:l | long jump 100 101 L_high_code: 102 | We are now running in the correctly relocated kernel, so 103 | we are no longer restricted to position-independent code. 104 | It is handy to leave transparent translation enabled while 105 | for the low 1GB while _bootstrap() is doing its thing. 106 107 | Do bootstrap stuff needed before main() gets called. 108 | Our boot loader leaves a copy of the kernel's exec header 109 | just before the start of the kernel text segment, so the 110 | kernel can sanity-check the DDB symbols at [end...esym]. 111 | Pass the struct exec at tmpstk-32 to _bootstrap(). 112 | Also, make sure the initial frame pointer is zero so that 113 | the backtrace algorithm used by KGDB terminates nicely. 114 lea _ASM_LABEL(tmpstk)-32,%sp 115 movl #0,%a6 116 jsr _C_LABEL(_bootstrap) | See locore2.c 117 118 | Now turn off the transparent translation of the low 1GB. 119 | (this also flushes the ATC) 120 clrl %sp@- 121 .long 0xf0170800 | pmove sp@,tt0 122 addql #4,%sp 123 124 | Now that _bootstrap() is done using the PROM functions, 125 | we can safely set the sfc/dfc to something != FC_CONTROL 126 moveq #FC_USERD,%d0 | make movs access "user data" 127 movc %d0,%sfc | space for copyin/copyout 128 movc %d0,%dfc 129 130 | Setup process zero user/kernel stacks. 131 lea _C_LABEL(lwp0),%a0 | get lwp0 132 movl %a0@(L_PCB),%a1 | XXXuvm_lwp_getuarea 133 lea %a1@(USPACE-4),%sp | set SSP to last word 134 movl #USRSTACK3X-4,%a2 135 movl %a2,%usp | init user SP 136 137 | Note curpcb was already set in _bootstrap(). 138 | Will do fpu initialization during autoconfig (see fpu.c) 139 | The interrupt vector table and stack are now ready. 140 | Interrupts will be enabled later, AFTER autoconfiguration 141 | is finished, to avoid spurrious interrupts. 142 143 /* 144 * Create a fake exception frame so that cpu_lwp_fork() can copy it. 145 * main() nevers returns; we exit to user mode from a forked process 146 * later on. 147 */ 148 clrw %sp@- | tf_format,tf_vector 149 clrl %sp@- | tf_pc (filled in later) 150 movw #PSL_USER,%sp@- | tf_sr for user mode 151 clrl %sp@- | tf_stackadj 152 lea %sp@(-64),%sp | tf_regs[16] 153 movl %a1,%a0@(L_MD_REGS) | lwp0.l_md.md_regs = trapframe 154 jbsr _C_LABEL(main) | main(&trapframe) 155 PANIC("main() returned") 156 157 | That is all the assembly startup code we need on the sun3x! 158 | The rest of this is like the hp300/locore.s where possible. 159 160 /* 161 * Trap/interrupt vector routines 162 */ 163 #include <m68k/m68k/trap_subr.s> 164 165 GLOBAL(buserr) 166 tstl _C_LABEL(nofault) | device probe? 167 jeq _C_LABEL(addrerr) | no, handle as usual 168 movl _C_LABEL(nofault),%sp@- | yes, 169 jbsr _C_LABEL(longjmp) | longjmp(nofault) 170 GLOBAL(addrerr) 171 clrl %sp@- | stack adjust count 172 moveml #0xFFFF,%sp@- | save user registers 173 movl %usp,%a0 | save the user SP 174 movl %a0,%sp@(FR_SP) | in the savearea 175 lea %sp@(FR_HW),%a1 | grab base of HW berr frame 176 moveq #0,%d0 177 movw %a1@(10),%d0 | grab SSW for fault processing 178 btst #12,%d0 | RB set? 179 jeq LbeX0 | no, test RC 180 bset #14,%d0 | yes, must set FB 181 movw %d0,%a1@(10) | for hardware too 182 LbeX0: 183 btst #13,%d0 | RC set? 184 jeq LbeX1 | no, skip 185 bset #15,%d0 | yes, must set FC 186 movw %d0,%a1@(10) | for hardware too 187 LbeX1: 188 btst #8,%d0 | data fault? 189 jeq Lbe0 | no, check for hard cases 190 movl %a1@(16),%d1 | fault address is as given in frame 191 jra Lbe10 | thats it 192 Lbe0: 193 btst #4,%a1@(6) | long (type B) stack frame? 194 jne Lbe4 | yes, go handle 195 movl %a1@(2),%d1 | no, can use save PC 196 btst #14,%d0 | FB set? 197 jeq Lbe3 | no, try FC 198 addql #4,%d1 | yes, adjust address 199 jra Lbe10 | done 200 Lbe3: 201 btst #15,%d0 | FC set? 202 jeq Lbe10 | no, done 203 addql #2,%d1 | yes, adjust address 204 jra Lbe10 | done 205 Lbe4: 206 movl %a1@(36),%d1 | long format, use stage B address 207 btst #15,%d0 | FC set? 208 jeq Lbe10 | no, all done 209 subql #2,%d1 | yes, adjust address 210 Lbe10: 211 movl %d1,%sp@- | push fault VA 212 movl %d0,%sp@- | and padded SSW 213 movw %a1@(6),%d0 | get frame format/vector offset 214 andw #0x0FFF,%d0 | clear out frame format 215 cmpw #12,%d0 | address error vector? 216 jeq Lisaerr | yes, go to it 217 218 /* MMU-specific code to determine reason for bus error. */ 219 movl %d1,%a0 | fault address 220 movl %sp@,%d0 | function code from ssw 221 btst #8,%d0 | data fault? 222 jne Lbe10a 223 movql #1,%d0 | user program access FC 224 | (we dont separate data/program) 225 btst #5,%a1@ | supervisor mode? 226 jeq Lbe10a | if no, done 227 movql #5,%d0 | else supervisor program access 228 Lbe10a: 229 ptestr %d0,%a0@,#7 | do a table search 230 pmove %psr,%sp@ | save result 231 movb %sp@,%d1 232 btst #2,%d1 | invalid? (incl. limit viol and berr) 233 jeq Lmightnotbemerr | no -> wp check 234 btst #7,%d1 | is it MMU table berr? 235 jeq Lismerr | no, must be fast 236 jra Lisberr1 | real bus err needs not be fast 237 Lmightnotbemerr: 238 btst #3,%d1 | write protect bit set? 239 jeq Lisberr1 | no, must be bus error 240 movl %sp@,%d0 | ssw into low word of d0 241 andw #0xc0,%d0 | write protect is set on page: 242 cmpw #0x40,%d0 | was it read cycle? 243 jeq Lisberr1 | yes, was not WPE, must be bus err 244 /* End of MMU-specific bus error code. */ 245 246 Lismerr: 247 movl #T_MMUFLT,%sp@- | show that we are an MMU fault 248 jra _ASM_LABEL(faultstkadj) | and deal with it 249 Lisaerr: 250 movl #T_ADDRERR,%sp@- | mark address error 251 jra _ASM_LABEL(faultstkadj) | and deal with it 252 Lisberr1: 253 clrw %sp@ | re-clear pad word 254 Lisberr: 255 movl #T_BUSERR,%sp@- | mark bus error 256 jra _ASM_LABEL(faultstkadj) | and deal with it 257 258 /* 259 * FP exceptions. 260 */ 261 GLOBAL(fpfline) 262 clrl %sp@- | stack adjust count 263 moveml #0xFFFF,%sp@- | save registers 264 moveq #T_FPEMULI,%d0 | denote as FP emulation trap 265 jra _ASM_LABEL(fault) | do it 266 267 GLOBAL(fpunsupp) 268 clrl %sp@- | stack adjust count 269 moveml #0xFFFF,%sp@- | save registers 270 moveq #T_FPEMULD,%d0 | denote as FP emulation trap 271 jra _ASM_LABEL(fault) | do it 272 273 /* 274 * Handles all other FP coprocessor exceptions. 275 * Note that since some FP exceptions generate mid-instruction frames 276 * and may cause signal delivery, we need to test for stack adjustment 277 * after the trap call. 278 */ 279 GLOBAL(fpfault) 280 clrl %sp@- | stack adjust count 281 moveml #0xFFFF,%sp@- | save user registers 282 movl %usp,%a0 | and save 283 movl %a0,%sp@(FR_SP) | the user stack pointer 284 clrl %sp@- | no VA arg 285 movl _C_LABEL(curpcb),%a0 | current pcb 286 lea %a0@(PCB_FPCTX),%a0 | address of FP savearea 287 fsave %a0@ | save state 288 tstb %a0@ | null state frame? 289 jeq Lfptnull | yes, safe 290 clrw %d0 | no, need to tweak BIU 291 movb %a0@(1),%d0 | get frame size 292 bset #3,%a0@(0,%d0:w) | set exc_pend bit of BIU 293 Lfptnull: 294 fmovem %fpsr,%sp@- | push fpsr as code argument 295 frestore %a0@ | restore state 296 movl #T_FPERR,%sp@- | push type arg 297 jra _ASM_LABEL(faultstkadj) | call trap and deal with stack cleanup 298 299 /* 300 * Other exceptions only cause four and six word stack frame and require 301 * no post-trap stack adjustment. 302 */ 303 GLOBAL(badtrap) 304 clrl %sp@- | stack adjust count 305 moveml #0xFFFF,%sp@- | save std frame regs 306 jbsr _C_LABEL(straytrap) | report 307 moveml %sp@+,#0xFFFF | restore regs 308 addql #4,%sp | stack adjust count 309 jra _ASM_LABEL(rei) | all done 310 311 /* 312 * Trap 0 is for system calls 313 */ 314 GLOBAL(trap0) 315 clrl %sp@- | stack adjust count 316 moveml #0xFFFF,%sp@- | save user registers 317 movl %usp,%a0 | save the user SP 318 movl %a0,%sp@(FR_SP) | in the savearea 319 movl %d0,%sp@- | push syscall number 320 jbsr _C_LABEL(syscall) | handle it 321 addql #4,%sp | pop syscall arg 322 movl %sp@(FR_SP),%a0 | grab and restore 323 movl %a0,%usp | user SP 324 moveml %sp@+,#0x7FFF | restore most registers 325 addql #8,%sp | pop SP and stack adjust 326 jra _ASM_LABEL(rei) | all done 327 328 /* 329 * Trap 12 is the entry point for the cachectl "syscall" 330 * cachectl(command, addr, length) 331 * command in d0, addr in a1, length in d1 332 */ 333 GLOBAL(trap12) 334 movl _C_LABEL(curlwp),%a0 335 movl %a0@(L_PROC),%sp@- | push curproc pointer 336 movl %d1,%sp@- | push length 337 movl %a1,%sp@- | push addr 338 movl %d0,%sp@- | push command 339 jbsr _C_LABEL(cachectl1) | do it 340 lea %sp@(16),%sp | pop args 341 jra _ASM_LABEL(rei) | all done 342 343 /* 344 * Trace (single-step) trap. Kernel-mode is special. 345 * User mode traps are simply passed on to trap(). 346 */ 347 GLOBAL(trace) 348 clrl %sp@- | stack adjust count 349 moveml #0xFFFF,%sp@- 350 moveq #T_TRACE,%d0 351 352 | Check PSW and see what happen. 353 | T=0 S=0 (should not happen) 354 | T=1 S=0 trace trap from user mode 355 | T=0 S=1 trace trap on a trap instruction 356 | T=1 S=1 trace trap from system mode (kernel breakpoint) 357 358 movw %sp@(FR_HW),%d1 | get PSW 359 notw %d1 | XXX no support for T0 on 680[234]0 360 andw #PSL_TS,%d1 | from system mode (T=1, S=1)? 361 jeq _ASM_LABEL(kbrkpt) | yes, kernel brkpt 362 jra _ASM_LABEL(fault) | no, user-mode fault 363 364 /* 365 * Trap 15 is used for: 366 * - GDB breakpoints (in user programs) 367 * - KGDB breakpoints (in the kernel) 368 * - trace traps for SUN binaries (not fully supported yet) 369 * User mode traps are simply passed to trap(). 370 */ 371 GLOBAL(trap15) 372 clrl %sp@- | stack adjust count 373 moveml #0xFFFF,%sp@- 374 moveq #T_TRAP15,%d0 375 btst #5,%sp@(FR_HW) | was supervisor mode? 376 jne _ASM_LABEL(kbrkpt) | yes, kernel brkpt 377 jra _ASM_LABEL(fault) | no, user-mode fault 378 379 ASLOCAL(kbrkpt) 380 | Kernel-mode breakpoint or trace trap. (%d0=trap_type) 381 | Save the system sp rather than the user sp. 382 movw #PSL_HIGHIPL,%sr | lock out interrupts 383 lea %sp@(FR_SIZE),%a6 | Save stack pointer 384 movl %a6,%sp@(FR_SP) | from before trap 385 386 | If we are not on tmpstk switch to it. 387 | (so debugger can change the stack pointer) 388 movl %a6,%d1 389 cmpl #_ASM_LABEL(tmpstk),%d1 390 jls Lbrkpt2 | already on tmpstk 391 | Copy frame to the temporary stack 392 movl %sp,%a0 | %a0=src 393 lea _ASM_LABEL(tmpstk)-96,%a1 | %a1=dst 394 movl %a1,%sp | sp=new frame 395 moveq #FR_SIZE,%d1 396 Lbrkpt1: 397 movl %a0@+,%a1@+ 398 subql #4,%d1 399 bgt Lbrkpt1 400 401 Lbrkpt2: 402 | Call the trap handler for the kernel debugger. 403 | Do not call trap() to handle it, so that we can 404 | set breakpoints in trap() if we want. We know 405 | the trap type is either T_TRACE or T_BREAKPOINT. 406 movl %d0,%sp@- | push trap type 407 jbsr _C_LABEL(trap_kdebug) 408 addql #4,%sp | pop args 409 410 | The stack pointer may have been modified, or 411 | data below it modified (by kgdb push call), 412 | so push the hardware frame at the current sp 413 | before restoring registers and returning. 414 movl %sp@(FR_SP),%a0 | modified sp 415 lea %sp@(FR_SIZE),%a1 | end of our frame 416 movl %a1@-,%a0@- | copy 2 longs with 417 movl %a1@-,%a0@- | ... predecrement 418 movl %a0,%sp@(FR_SP) | sp = h/w frame 419 moveml %sp@+,#0x7FFF | restore all but sp 420 movl %sp@,%sp | ... and sp 421 rte | all done 422 423 /* 424 * Interrupt handlers. Most are auto-vectored, 425 * and hard-wired the same way on all sun3 models. 426 * Format in the stack is: 427 * %d0,%d1,%a0,%a1, sr, pc, vo 428 */ 429 430 /* 431 * This is the common auto-vector interrupt handler, 432 * for which the CPU provides the vector=0x18+level. 433 * These are installed in the interrupt vector table. 434 */ 435 #ifdef __ELF__ 436 .align 4 437 #else 438 .align 2 439 #endif 440 GLOBAL(_isr_autovec) 441 INTERRUPT_SAVEREG 442 jbsr _C_LABEL(isr_autovec) 443 INTERRUPT_RESTOREREG 444 jra _ASM_LABEL(rei) 445 446 /* clock: see clock.c */ 447 #ifdef __ELF__ 448 .align 4 449 #else 450 .align 2 451 #endif 452 GLOBAL(_isr_clock) 453 INTERRUPT_SAVEREG 454 jbsr _C_LABEL(clock_intr) 455 INTERRUPT_RESTOREREG 456 jra _ASM_LABEL(rei) 457 458 | Handler for all vectored interrupts (i.e. VME interrupts) 459 #ifdef __ELF__ 460 .align 4 461 #else 462 .align 2 463 #endif 464 GLOBAL(_isr_vectored) 465 INTERRUPT_SAVEREG 466 jbsr _C_LABEL(isr_vectored) 467 INTERRUPT_RESTOREREG 468 jra _ASM_LABEL(rei) 469 470 /* interrupt counters (needed by vmstat) */ 471 GLOBAL(intrnames) 472 .asciz "spur" | 0 473 .asciz "lev1" | 1 474 .asciz "lev2" | 2 475 .asciz "lev3" | 3 476 .asciz "lev4" | 4 477 .asciz "clock" | 5 478 .asciz "lev6" | 6 479 .asciz "nmi" | 7 480 GLOBAL(eintrnames) 481 482 .data 483 .even 484 GLOBAL(intrcnt) 485 .long 0,0,0,0,0,0,0,0 486 GLOBAL(eintrcnt) 487 .text 488 489 /* 490 * Emulation of VAX REI instruction. 491 * 492 * This code is (mostly) un-altered from the hp300 code, 493 * except that sun machines do not need a simulated SIR 494 * because they have a real software interrupt register. 495 * 496 * This code deals with checking for and servicing ASTs 497 * (profiling, scheduling) and software interrupts (network, softclock). 498 * We check for ASTs first, just like the VAX. To avoid excess overhead 499 * the T_ASTFLT handling code will also check for software interrupts so we 500 * do not have to do it here. After identifying that we need an AST we 501 * drop the IPL to allow device interrupts. 502 * 503 * This code is complicated by the fact that sendsig may have been called 504 * necessitating a stack cleanup. 505 */ 506 507 ASGLOBAL(rei) 508 #ifdef DIAGNOSTIC 509 tstl _C_LABEL(panicstr) | have we panicked? 510 jne Ldorte | yes, do not make matters worse 511 #endif 512 tstl _C_LABEL(astpending) | AST pending? 513 jeq Ldorte | no, done 514 Lrei1: 515 btst #5,%sp@ | yes, are we returning to user mode? 516 jne Ldorte | no, done 517 movw #PSL_LOWIPL,%sr | lower SPL 518 clrl %sp@- | stack adjust 519 moveml #0xFFFF,%sp@- | save all registers 520 movl %usp,%a1 | including 521 movl %a1,%sp@(FR_SP) | the users SP 522 clrl %sp@- | VA == none 523 clrl %sp@- | code == none 524 movl #T_ASTFLT,%sp@- | type == async system trap 525 pea %sp@(12) | fp == address of trap frame 526 jbsr _C_LABEL(trap) | go handle it 527 lea %sp@(16),%sp | pop value args 528 movl %sp@(FR_SP),%a0 | restore user SP 529 movl %a0,%usp | from save area 530 movw %sp@(FR_ADJ),%d0 | need to adjust stack? 531 jne Laststkadj | yes, go to it 532 moveml %sp@+,#0x7FFF | no, restore most user regs 533 addql #8,%sp | toss SP and stack adjust 534 rte | and do real RTE 535 Laststkadj: 536 lea %sp@(FR_HW),%a1 | pointer to HW frame 537 addql #8,%a1 | source pointer 538 movl %a1,%a0 | source 539 addw %d0,%a0 | + hole size = dest pointer 540 movl %a1@-,%a0@- | copy 541 movl %a1@-,%a0@- | 8 bytes 542 movl %a0,%sp@(FR_SP) | new SSP 543 moveml %sp@+,#0x7FFF | restore user registers 544 movl %sp@,%sp | and our SP 545 Ldorte: 546 rte | real return 547 548 /* 549 * Initialization is at the beginning of this file, because the 550 * kernel entry point needs to be at zero for compatibility with 551 * the Sun boot loader. This works on Sun machines because the 552 * interrupt vector table for reset is NOT at address zero. 553 * (The MMU has a "boot" bit that forces access to the PROM) 554 */ 555 556 /* 557 * Use common m68k sigcode. 558 */ 559 #include <m68k/m68k/sigcode.s> 560 #ifdef COMPAT_SUNOS 561 #include <m68k/m68k/sunos_sigcode.s> 562 #endif 563 564 .text 565 566 /* 567 * Primitives 568 */ 569 570 /* 571 * Use common m68k support routines. 572 */ 573 #include <m68k/m68k/support.s> 574 575 /* 576 * Use common m68k process/lwp switch and context save subroutines. 577 */ 578 #define FPCOPROC /* XXX: Temp. Reqd. */ 579 #include <m68k/m68k/switch_subr.s> 580 581 582 /* suline() */ 583 584 #ifdef DEBUG 585 .data 586 ASGLOBAL(fulltflush) 587 .long 0 588 ASGLOBAL(fullcflush) 589 .long 0 590 .text 591 #endif 592 593 ENTRY(ecacheon) 594 rts 595 596 ENTRY(ecacheoff) 597 rts 598 599 /* 600 * Get callers current SP value. 601 * Note that simply taking the address of a local variable in a C function 602 * doesn't work because callee saved registers may be outside the stack frame 603 * defined by A6 (e.g. GCC generated code). 604 * 605 * [I don't think the ENTRY() macro will do the right thing with this -- glass] 606 */ 607 GLOBAL(getsp) 608 movl %sp,%d0 | get current SP 609 addql #4,%d0 | compensate for return address 610 movl %d0,%a0 611 rts 612 613 ENTRY(getvbr) 614 movc %vbr,%d0 615 movl %d0,%a0 616 rts 617 618 ENTRY(setvbr) 619 movl %sp@(4),%d0 620 movc %d0,%vbr 621 rts 622 623 /* 624 * Load a new CPU Root Pointer (CRP) into the MMU. 625 * void loadcrp(struct mmu_rootptr *); 626 */ 627 ENTRY(loadcrp) 628 movl %sp@(4),%a0 | arg1: &CRP 629 movl #CACHE_CLR,%d0 630 movc %d0,%cacr | invalidate cache(s) 631 pflusha | flush entire TLB 632 pmove %a0@,%crp | load new user root pointer 633 rts 634 635 ENTRY(getcrp) 636 movl %sp@(4),%a0 | arg1: &crp 637 pmove %crp,%a0@ | *crpp = %crp 638 rts 639 640 /* 641 * Get the physical address of the PTE for a given VA. 642 */ 643 ENTRY(ptest_addr) 644 movl %sp@(4),%a1 | VA 645 ptestr #5,%a1@,#7,%a0 | %a0 = addr of PTE 646 movl %a0,%d0 | Result in %d0 (not a pointer return) 647 rts 648 649 /* 650 * Set processor priority level calls. Most are implemented with 651 * inline asm expansions. However, we need one instantiation here 652 * in case some non-optimized code makes external references. 653 * Most places will use the inlined functions param.h supplies. 654 */ 655 656 ENTRY(_getsr) 657 clrl %d0 658 movw %sr,%d0 659 movl %a1,%d0 660 rts 661 662 ENTRY(_spl) 663 clrl %d0 664 movw %sr,%d0 665 movl %sp@(4),%d1 666 movw %d1,%sr 667 rts 668 669 ENTRY(_splraise) 670 clrl %d0 671 movw %sr,%d0 672 movl %d0,%d1 673 andl #PSL_HIGHIPL,%d1 | old &= PSL_HIGHIPL 674 cmpl %sp@(4),%d1 | (old - new) 675 bge Lsplr 676 movl %sp@(4),%d1 677 movw %d1,%sr 678 Lsplr: 679 rts 680 681 /* 682 * _delay(unsigned N) 683 * Delay for at least (N/256) microseconds. 684 * This routine depends on the variable: delay_divisor 685 * which should be set based on the CPU clock rate. 686 * XXX: Currently this is set based on the CPU model, 687 * XXX: but this should be determined at run time... 688 */ 689 GLOBAL(_delay) 690 | %d0 = arg = (usecs << 8) 691 movl %sp@(4),%d0 692 | %d1 = delay_divisor; 693 movl _C_LABEL(delay_divisor),%d1 694 jra L_delay /* Jump into the loop! */ 695 696 /* 697 * Align the branch target of the loop to a half-line (8-byte) 698 * boundary to minimize cache effects. This guarantees both 699 * that there will be no prefetch stalls due to cache line burst 700 * operations and that the loop will run from a single cache 701 * half-line. 702 */ 703 #ifdef __ELF__ 704 .align 8 705 #else 706 .align 3 707 #endif 708 L_delay: 709 subl %d1,%d0 710 jgt L_delay 711 rts 712 713 | Define some addresses, mostly so DDB can print useful info. 714 | Not using _C_LABEL() here because these symbols are never 715 | referenced by any C code, and if the leading underscore 716 | ever goes away, these lines turn into syntax errors... 717 .set _KERNBASE3X,KERNBASE3X 718 .set _MONSTART,SUN3X_MONSTART 719 .set _PROM_BASE,SUN3X_PROM_BASE 720 .set _MONEND,SUN3X_MONEND 721 722 |The end! 723
Indexes created Wed Oct 29 05:09:45 GMT 2025