locore.s revision 1.9
1 /* $NetBSD: locore.s,v 1.9 1997/02/20 00:54:21 jeremy Exp $ */ 2 3 /* 4 * Copyright (c) 1988 University of Utah. 5 * Copyright (c) 1980, 1990, 1993 6 * The Regents of the University of California. All rights reserved. 7 * 8 * This code is derived from software contributed to Berkeley by 9 * the Systems Programming Group of the University of Utah Computer 10 * Science Department. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. All advertising materials mentioning features or use of this software 21 * must display the following acknowledgement: 22 * This product includes software developed by the University of 23 * California, Berkeley and its contributors. 24 * 4. Neither the name of the University nor the names of its contributors 25 * may be used to endorse or promote products derived from this software 26 * without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 29 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 30 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 31 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 32 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 36 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 37 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 38 * SUCH DAMAGE. 39 * 40 * from: Utah $Hdr: locore.s 1.66 92/12/22$ 41 * @(#)locore.s 8.6 (Berkeley) 5/27/94 42 */ 43 44 #include "assym.h" 45 #include <machine/trap.h> 46 47 | Remember this is a fun project! 48 49 .data 50 .globl _mon_crp 51 _mon_crp: 52 .long 0,0 53 54 | This is for kvm_mkdb, and should be the address of the beginning 55 | of the kernel text segment (not necessarily the same as kernbase). 56 .text 57 .globl _kernel_text 58 _kernel_text: 59 60 | This is the entry point, as well as the end of the temporary stack 61 | used during process switch (one 8K page ending at start) 62 .globl tmpstk 63 tmpstk: 64 .globl start 65 start: 66 | The first step, after disabling interrupts, is to map enough of the kernel 67 | into high virtual address space so that we can use position dependent code. 68 | This is a tricky task on the sun3x because the MMU is already enabled and 69 | the ROM monitor provides no indication of where the root MMU table is mapped. 70 | Therefore we must use one of the 68030's 'transparent translation' registers 71 | to define a range in the address space where the MMU translation is 72 | turned off. Once this is complete we can modify the MMU table directly 73 | without the need for it to be mapped into virtual memory. 74 | All code must be position independent until otherwise noted, as the 75 | boot loader has loaded us into low memory but all the symbols in this 76 | code have been linked high. 77 movw #PSL_HIGHIPL, sr | no interrupts 78 movl #KERNBASE, a5 | for vtop conversion 79 lea _mon_crp, a0 | where to store the CRP 80 subl a5, a0 81 | Note: borrowing mon_crp for tt0 setup... 82 movl #0x3F8107, a0@ | map the low 1GB v=p with the 83 pmove a0@, tt0 | transparent translation reg0 84 85 | In order to map the kernel into high memory we will copy the root table 86 | entry which maps the 16 megabytes of memory starting at 0x0 into the 87 | entry which maps the 16 megabytes starting at KERNBASE. 88 pmove crp, a0@ | Get monitor CPU root pointer 89 movl a0@(4), a1 | 2nd word is PA of level A table 90 91 movl a1, a0 | compute the descriptor address 92 addl #0x3e0, a1 | for VA starting at KERNBASE 93 movl a0@, a1@ | copy descriptor type 94 movl a0@(4), a1@(4) | copy physical address 95 96 | Kernel is now double mapped at zero and KERNBASE. 97 | Force a long jump to the relocated code (high VA). 98 movl #IC_CLEAR, d0 | Flush the I-cache 99 movc d0, cacr 100 jmp L_high_code:l | long jump 101 102 L_high_code: 103 | We are now running in the correctly relocated kernel, so 104 | we are no longer restricted to position-independent code. 105 | It is handy to leave transparent translation enabled while 106 | for the low 1GB while __bootstrap() is doing its thing. 107 108 | Do bootstrap stuff needed before main() gets called. 109 | Our boot loader leaves a copy of the kernel's exec header 110 | just before the start of the kernel text segment, so the 111 | kernel can sanity-check the DDB symbols at [end...esym]. 112 | Pass the struct exec at tmpstk-32 to __bootstrap(). 113 | Also, make sure the initial frame pointer is zero so that 114 | the backtrace algorithm used by KGDB terminates nicely. 115 lea tmpstk-32, sp 116 movl #0,a6 117 jsr __bootstrap | See _startup.c 118 119 | Now turn off the transparent translation of the low 1GB. 120 | (this also flushes the ATC) 121 clrl sp@- 122 pmove sp@,tt0 123 addql #4,sp 124 125 | Now that __bootstrap() is done using the PROM functions, 126 | we can safely set the sfc/dfc to something != FC_CONTROL 127 moveq #FC_USERD, d0 | make movs access "user data" 128 movc d0, sfc | space for copyin/copyout 129 movc d0, dfc 130 131 | Setup process zero user/kernel stacks. 132 movl _proc0paddr,a1 | get proc0 pcb addr 133 lea a1@(USPACE-4),sp | set SSP to last word 134 movl #USRSTACK-4,a2 135 movl a2,usp | init user SP 136 137 | Note curpcb was already set in __bootstrap(). 138 | Will do fpu initialization during autoconfig (see fpu.c) 139 | The interrupt vector table and stack are now ready. 140 | Interrupts will be enabled later, AFTER autoconfiguration 141 | is finished, to avoid spurrious interrupts. 142 143 /* 144 * Final preparation for calling main. 145 * 146 * Create a fake exception frame that returns to user mode, 147 * and save its address in p->p_md.md_regs for cpu_fork(). 148 * The new frames for process 1 and 2 will be adjusted by 149 * cpu_set_kpc() to arrange for a call to a kernel function 150 * before the new process does its rte out to user mode. 151 */ 152 clrw sp@- | tf_format,tf_vector 153 clrl sp@- | tf_pc (filled in later) 154 movw #PSL_USER,sp@- | tf_sr for user mode 155 clrl sp@- | tf_stackadj 156 lea sp@(-64),sp | tf_regs[16] 157 movl sp,a1 | a1=trapframe 158 lea _proc0,a0 | proc0.p_md.md_regs = 159 movl a1,a0@(P_MDREGS) | trapframe 160 movl a2,a1@(FR_SP) | a2 == usp (from above) 161 pea a1@ | push &trapframe 162 jbsr _main | main(&trapframe) 163 addql #4,sp | help DDB backtrace 164 trap #15 | should not get here 165 166 | This is used by cpu_fork() to return to user mode. 167 | It is called with SP pointing to a struct trapframe. 168 .globl _proc_do_uret 169 _proc_do_uret: 170 movl sp@(FR_SP),a0 | grab and load 171 movl a0,usp | user SP 172 moveml sp@+,#0x7FFF | load most registers (all but SSP) 173 addql #8,sp | pop SSP and stack adjust count 174 rte 175 176 /* 177 * proc_trampoline: 178 * This is used by cpu_set_kpc() to "push" a function call onto the 179 * kernel stack of some process, very much like a signal delivery. 180 * When we get here, the stack has: 181 * 182 * SP+8: switchframe from before cpu_set_kpc 183 * SP+4: void *proc; 184 * SP: u_long func; 185 * 186 * On entry, the switchframe pushed by cpu_set_kpc has already been 187 * popped off the stack, so all this needs to do is pop the function 188 * pointer into a register, call it, then pop the arg, and finally 189 * return using the switchframe that remains on the stack. 190 */ 191 .globl _proc_trampoline 192 _proc_trampoline: 193 movl sp@+,a0 | function pointer 194 jbsr a0@ | (*func)(procp) 195 addql #4,sp | toss the arg 196 rts | as cpu_switch would do 197 198 | That is all the assembly startup code we need on the sun3x! 199 | The rest of this is like the hp300/locore.s where possible. 200 201 /* 202 * Trap/interrupt vector routines 203 */ 204 205 .globl _buserr, _addrerr, _illinst, _zerodiv, _chkinst 206 .globl _trapvinst, _privinst, _trace, _badtrap, _fmterr 207 .globl _trap0, _trap1, _trap2, _trap12, _trap15 208 .globl _coperr, _fpfline, _fpunsupp 209 210 .globl _trap, _nofault, _longjmp 211 _buserr: 212 tstl _nofault | device probe? 213 jeq _addrerr | no, handle as usual 214 movl _nofault,sp@- | yes, 215 jbsr _longjmp | longjmp(nofault) 216 _addrerr: 217 clrl sp@- | stack adjust count 218 moveml #0xFFFF,sp@- | save user registers 219 movl usp,a0 | save the user SP 220 movl a0,sp@(FR_SP) | in the savearea 221 lea sp@(FR_HW),a1 | grab base of HW berr frame 222 moveq #0,d0 223 movw a1@(10),d0 | grab SSW for fault processing 224 btst #12,d0 | RB set? 225 jeq LbeX0 | no, test RC 226 bset #14,d0 | yes, must set FB 227 movw d0,a1@(10) | for hardware too 228 LbeX0: 229 btst #13,d0 | RC set? 230 jeq LbeX1 | no, skip 231 bset #15,d0 | yes, must set FC 232 movw d0,a1@(10) | for hardware too 233 LbeX1: 234 btst #8,d0 | data fault? 235 jeq Lbe0 | no, check for hard cases 236 movl a1@(16),d1 | fault address is as given in frame 237 jra Lbe10 | thats it 238 Lbe0: 239 btst #4,a1@(6) | long (type B) stack frame? 240 jne Lbe4 | yes, go handle 241 movl a1@(2),d1 | no, can use save PC 242 btst #14,d0 | FB set? 243 jeq Lbe3 | no, try FC 244 addql #4,d1 | yes, adjust address 245 jra Lbe10 | done 246 Lbe3: 247 btst #15,d0 | FC set? 248 jeq Lbe10 | no, done 249 addql #2,d1 | yes, adjust address 250 jra Lbe10 | done 251 Lbe4: 252 movl a1@(36),d1 | long format, use stage B address 253 btst #15,d0 | FC set? 254 jeq Lbe10 | no, all done 255 subql #2,d1 | yes, adjust address 256 Lbe10: 257 movl d1,sp@- | push fault VA 258 movl d0,sp@- | and padded SSW 259 movw a1@(6),d0 | get frame format/vector offset 260 andw #0x0FFF,d0 | clear out frame format 261 cmpw #12,d0 | address error vector? 262 jeq Lisaerr | yes, go to it 263 264 /* MMU-specific code to determine reason for bus error. */ 265 movl d1,a0 | fault address 266 movl sp@,d0 | function code from ssw 267 btst #8,d0 | data fault? 268 jne Lbe10a 269 movql #1,d0 | user program access FC 270 | (we dont separate data/program) 271 btst #5,a1@ | supervisor mode? 272 jeq Lbe10a | if no, done 273 movql #5,d0 | else supervisor program access 274 Lbe10a: 275 ptestr d0,a0@,#7 | do a table search 276 pmove psr,sp@ | save result 277 movb sp@,d1 278 btst #2,d1 | invalid? (incl. limit viol and berr) 279 jeq Lmightnotbemerr | no -> wp check 280 btst #7,d1 | is it MMU table berr? 281 jeq Lismerr | no, must be fast 282 jra Lisberr1 | real bus err needs not be fast 283 Lmightnotbemerr: 284 btst #3,d1 | write protect bit set? 285 jeq Lisberr1 | no, must be bus error 286 movl sp@,d0 | ssw into low word of d0 287 andw #0xc0,d0 | write protect is set on page: 288 cmpw #0x40,d0 | was it read cycle? 289 jeq Lisberr1 | yes, was not WPE, must be bus err 290 /* End of MMU-specific bus error code. */ 291 292 Lismerr: 293 movl #T_MMUFLT,sp@- | show that we are an MMU fault 294 jra Ltrapnstkadj | and deal with it 295 Lisaerr: 296 movl #T_ADDRERR,sp@- | mark address error 297 jra Ltrapnstkadj | and deal with it 298 Lisberr1: 299 clrw sp@ | re-clear pad word 300 Lisberr: 301 movl #T_BUSERR,sp@- | mark bus error 302 Ltrapnstkadj: 303 jbsr _trap | handle the error 304 lea sp@(12),sp | pop value args 305 movl sp@(FR_SP),a0 | restore user SP 306 movl a0,usp | from save area 307 movw sp@(FR_ADJ),d0 | need to adjust stack? 308 jne Lstkadj | yes, go to it 309 moveml sp@+,#0x7FFF | no, restore most user regs 310 addql #8,sp | toss SSP and stkadj 311 jra rei | all done 312 Lstkadj: 313 lea sp@(FR_HW),a1 | pointer to HW frame 314 addql #8,a1 | source pointer 315 movl a1,a0 | source 316 addw d0,a0 | + hole size = dest pointer 317 movl a1@-,a0@- | copy 318 movl a1@-,a0@- | 8 bytes 319 movl a0,sp@(FR_SP) | new SSP 320 moveml sp@+,#0x7FFF | restore user registers 321 movl sp@,sp | and our SP 322 jra rei | all done 323 324 /* 325 * FP exceptions. 326 */ 327 _fpfline: 328 clrl sp@- | stack adjust count 329 moveml #0xFFFF,sp@- | save registers 330 moveq #T_FPEMULI,d0 | denote as FP emulation trap 331 jra fault | do it 332 333 _fpunsupp: 334 clrl sp@- | stack adjust count 335 moveml #0xFFFF,sp@- | save registers 336 moveq #T_FPEMULD,d0 | denote as FP emulation trap 337 jra fault | do it 338 339 /* 340 * Handles all other FP coprocessor exceptions. 341 * Note that since some FP exceptions generate mid-instruction frames 342 * and may cause signal delivery, we need to test for stack adjustment 343 * after the trap call. 344 */ 345 .globl _fpfault 346 _fpfault: 347 clrl sp@- | stack adjust count 348 moveml #0xFFFF,sp@- | save user registers 349 movl usp,a0 | and save 350 movl a0,sp@(FR_SP) | the user stack pointer 351 clrl sp@- | no VA arg 352 movl _curpcb,a0 | current pcb 353 lea a0@(PCB_FPCTX),a0 | address of FP savearea 354 fsave a0@ | save state 355 tstb a0@ | null state frame? 356 jeq Lfptnull | yes, safe 357 clrw d0 | no, need to tweak BIU 358 movb a0@(1),d0 | get frame size 359 bset #3,a0@(0,d0:w) | set exc_pend bit of BIU 360 Lfptnull: 361 fmovem fpsr,sp@- | push fpsr as code argument 362 frestore a0@ | restore state 363 movl #T_FPERR,sp@- | push type arg 364 jra Ltrapnstkadj | call trap and deal with stack cleanup 365 366 /* 367 * Coprocessor and format errors can generate mid-instruction stack 368 * frames and cause signal delivery hence we need to check for potential 369 * stack adjustment. 370 */ 371 _coperr: 372 clrl sp@- | stack adjust count 373 moveml #0xFFFF,sp@- 374 movl usp,a0 | get and save 375 movl a0,sp@(FR_SP) | the user stack pointer 376 clrl sp@- | no VA arg 377 clrl sp@- | or code arg 378 movl #T_COPERR,sp@- | push trap type 379 jra Ltrapnstkadj | call trap and deal with stack adjustments 380 381 _fmterr: 382 clrl sp@- | stack adjust count 383 moveml #0xFFFF,sp@- 384 movl usp,a0 | get and save 385 movl a0,sp@(FR_SP) | the user stack pointer 386 clrl sp@- | no VA arg 387 clrl sp@- | or code arg 388 movl #T_FMTERR,sp@- | push trap type 389 jra Ltrapnstkadj | call trap and deal with stack adjustments 390 391 /* 392 * Other exceptions only cause four and six word stack frame and require 393 * no post-trap stack adjustment. 394 */ 395 _illinst: 396 clrl sp@- 397 moveml #0xFFFF,sp@- 398 moveq #T_ILLINST,d0 399 jra fault 400 401 _zerodiv: 402 clrl sp@- 403 moveml #0xFFFF,sp@- 404 moveq #T_ZERODIV,d0 405 jra fault 406 407 _chkinst: 408 clrl sp@- 409 moveml #0xFFFF,sp@- 410 moveq #T_CHKINST,d0 411 jra fault 412 413 _trapvinst: 414 clrl sp@- 415 moveml #0xFFFF,sp@- 416 moveq #T_TRAPVINST,d0 417 jra fault 418 419 _privinst: 420 clrl sp@- 421 moveml #0xFFFF,sp@- 422 moveq #T_PRIVINST,d0 423 jra fault 424 425 .globl fault 426 fault: 427 movl usp,a0 | get and save 428 movl a0,sp@(FR_SP) | the user stack pointer 429 clrl sp@- | no VA arg 430 clrl sp@- | or code arg 431 movl d0,sp@- | push trap type 432 jbsr _trap | handle trap 433 lea sp@(12),sp | pop value args 434 movl sp@(FR_SP),a0 | restore 435 movl a0,usp | user SP 436 moveml sp@+,#0x7FFF | restore most user regs 437 addql #8,sp | pop SP and stack adjust 438 jra rei | all done 439 440 .globl _straytrap 441 _badtrap: 442 clrl sp@- | stack adjust count 443 moveml #0xFFFF,sp@- | save std frame regs 444 jbsr _straytrap | report 445 moveml sp@+,#0xFFFF | restore regs 446 addql #4, sp | stack adjust count 447 jra rei | all done 448 449 /* 450 * Trap 0 is for system calls 451 */ 452 .globl _syscall 453 _trap0: 454 clrl sp@- | stack adjust count 455 moveml #0xFFFF,sp@- | save user registers 456 movl usp,a0 | save the user SP 457 movl a0,sp@(FR_SP) | in the savearea 458 movl d0,sp@- | push syscall number 459 jbsr _syscall | handle it 460 addql #4,sp | pop syscall arg 461 movl sp@(FR_SP),a0 | grab and restore 462 movl a0,usp | user SP 463 moveml sp@+,#0x7FFF | restore most registers 464 addql #8,sp | pop SP and stack adjust 465 jra rei | all done 466 467 /* 468 * Trap 1 is either: 469 * sigreturn (native NetBSD executable) 470 * breakpoint (HPUX executable) 471 */ 472 _trap1: 473 #if 0 /* COMPAT_HPUX */ 474 /* If process is HPUX, this is a user breakpoint. */ 475 jne trap15 | breakpoint 476 #endif 477 /* fall into sigreturn */ 478 479 /* 480 * The sigreturn() syscall comes here. It requires special handling 481 * because we must open a hole in the stack to fill in the (possibly much 482 * larger) original stack frame. 483 */ 484 sigreturn: 485 lea sp@(-84),sp | leave enough space for largest frame 486 movl sp@(84),sp@ | move up current 8 byte frame 487 movl sp@(88),sp@(4) 488 movl #84,sp@- | default: adjust by 84 bytes 489 moveml #0xFFFF,sp@- | save user registers 490 movl usp,a0 | save the user SP 491 movl a0,sp@(FR_SP) | in the savearea 492 movl #SYS_sigreturn,sp@- | push syscall number 493 jbsr _syscall | handle it 494 addql #4,sp | pop syscall# 495 movl sp@(FR_SP),a0 | grab and restore 496 movl a0,usp | user SP 497 lea sp@(FR_HW),a1 | pointer to HW frame 498 movw sp@(FR_ADJ),d0 | do we need to adjust the stack? 499 jeq Lsigr1 | no, just continue 500 moveq #92,d1 | total size 501 subw d0,d1 | - hole size = frame size 502 lea a1@(92),a0 | destination 503 addw d1,a1 | source 504 lsrw #1,d1 | convert to word count 505 subqw #1,d1 | minus 1 for dbf 506 Lsigrlp: 507 movw a1@-,a0@- | copy a word 508 dbf d1,Lsigrlp | continue 509 movl a0,a1 | new HW frame base 510 Lsigr1: 511 movl a1,sp@(FR_SP) | new SP value 512 moveml sp@+,#0x7FFF | restore user registers 513 movl sp@,sp | and our SP 514 jra rei | all done 515 516 /* 517 * Trap 2 is one of: 518 * NetBSD: not used (ignore) 519 * SunOS: Some obscure FPU operation 520 * HPUX: sigreturn 521 */ 522 _trap2: 523 #if 0 /* COMPAT_HPUX */ 524 /* XXX: If HPUX, this is a user breakpoint. */ 525 jne sigreturn 526 #endif 527 /* fall into trace (NetBSD or SunOS) */ 528 529 /* 530 * Trace (single-step) trap. Kernel-mode is special. 531 * User mode traps are simply passed on to trap(). 532 */ 533 _trace: 534 clrl sp@- | stack adjust count 535 moveml #0xFFFF,sp@- 536 moveq #T_TRACE,d0 537 movw sp@(FR_HW),d1 | get PSW 538 andw #PSL_S,d1 | from system mode? 539 jne kbrkpt | yes, kernel breakpoint 540 jra fault | no, user-mode fault 541 542 /* 543 * Trap 15 is used for: 544 * - GDB breakpoints (in user programs) 545 * - KGDB breakpoints (in the kernel) 546 * - trace traps for SUN binaries (not fully supported yet) 547 * User mode traps are passed simply passed to trap() 548 */ 549 _trap15: 550 clrl sp@- | stack adjust count 551 moveml #0xFFFF,sp@- 552 moveq #T_TRAP15,d0 553 movw sp@(FR_HW),d1 | get PSW 554 andw #PSL_S,d1 | from system mode? 555 jne kbrkpt | yes, kernel breakpoint 556 jra fault | no, user-mode fault 557 558 kbrkpt: | Kernel-mode breakpoint or trace trap. (d0=trap_type) 559 | Save the system sp rather than the user sp. 560 movw #PSL_HIGHIPL,sr | lock out interrupts 561 lea sp@(FR_SIZE),a6 | Save stack pointer 562 movl a6,sp@(FR_SP) | from before trap 563 564 | If we are not on tmpstk switch to it. 565 | (so debugger can change the stack pointer) 566 movl a6,d1 567 cmpl #tmpstk,d1 568 jls Lbrkpt2 | already on tmpstk 569 | Copy frame to the temporary stack 570 movl sp,a0 | a0=src 571 lea tmpstk-96,a1 | a1=dst 572 movl a1,sp | sp=new frame 573 moveq #FR_SIZE,d1 574 Lbrkpt1: 575 movl a0@+,a1@+ 576 subql #4,d1 577 bgt Lbrkpt1 578 579 Lbrkpt2: 580 | Call the special kernel debugger trap handler. 581 | Do not call trap() to handle it, so that we can 582 | set breakpoints in trap() if we want. We know 583 | the trap type is either T_TRACE or T_BREAKPOINT. 584 movl d0,sp@- | push trap type 585 jbsr _trap_kdebug 586 addql #4,sp | pop args 587 588 | The stack pointer may have been modified, or 589 | data below it modified (by kgdb push call), 590 | so push the hardware frame at the current sp 591 | before restoring registers and returning. 592 movl sp@(FR_SP),a0 | modified sp 593 lea sp@(FR_SIZE),a1 | end of our frame 594 movl a1@-,a0@- | copy 2 longs with 595 movl a1@-,a0@- | ... predecrement 596 movl a0,sp@(FR_SP) | sp = h/w frame 597 moveml sp@+,#0x7FFF | restore all but sp 598 movl sp@,sp | ... and sp 599 rte | all done 600 601 /* 602 * Trap 12 is the entry point for the cachectl "syscall" 603 * cachectl(command, addr, length) 604 * command in d0, addr in a1, length in d1 605 */ 606 .globl _cachectl 607 _trap12: 608 movl d1,sp@- | push length 609 movl a1,sp@- | push addr 610 movl d0,sp@- | push command 611 jbsr _cachectl | do it 612 lea sp@(12),sp | pop args 613 jra rei | all done 614 615 /* 616 * Interrupt handlers. Most are auto-vectored, 617 * and hard-wired the same way on all sun3 models. 618 * Format in the stack is: 619 * d0,d1,a0,a1, sr, pc, vo 620 */ 621 622 #define INTERRUPT_SAVEREG \ 623 moveml #0xC0C0,sp@- 624 625 #define INTERRUPT_RESTORE \ 626 moveml sp@+,#0x0303 627 628 /* 629 * This is the common auto-vector interrupt handler, 630 * for which the CPU provides the vector=0x18+level. 631 * These are installed in the interrupt vector table. 632 */ 633 .align 2 634 .globl __isr_autovec, _isr_autovec 635 __isr_autovec: 636 INTERRUPT_SAVEREG 637 jbsr _isr_autovec 638 INTERRUPT_RESTORE 639 jra rei 640 641 /* clock: see clock.c */ 642 .align 2 643 .globl __isr_clock, _clock_intr 644 __isr_clock: 645 INTERRUPT_SAVEREG 646 jbsr _clock_intr 647 INTERRUPT_RESTORE 648 jra rei 649 650 | Handler for all vectored interrupts (i.e. VME interrupts) 651 .align 2 652 .globl __isr_vectored, _isr_vectored 653 __isr_vectored: 654 INTERRUPT_SAVEREG 655 jbsr _isr_vectored 656 INTERRUPT_RESTORE 657 jra rei 658 659 #undef INTERRUPT_SAVEREG 660 #undef INTERRUPT_RESTORE 661 662 /* interrupt counters (needed by vmstat) */ 663 .globl _intrcnt,_eintrcnt,_intrnames,_eintrnames 664 _intrnames: 665 .asciz "spur" | 0 666 .asciz "lev1" | 1 667 .asciz "lev2" | 2 668 .asciz "lev3" | 3 669 .asciz "lev4" | 4 670 .asciz "clock" | 5 671 .asciz "lev6" | 6 672 .asciz "nmi" | 7 673 _eintrnames: 674 675 .data 676 .even 677 _intrcnt: 678 .long 0,0,0,0,0,0,0,0,0,0 679 _eintrcnt: 680 .text 681 682 /* 683 * Emulation of VAX REI instruction. 684 * 685 * This code is (mostly) un-altered from the hp300 code, 686 * except that sun machines do not need a simulated SIR 687 * because they have a real software interrupt register. 688 * 689 * This code deals with checking for and servicing ASTs 690 * (profiling, scheduling) and software interrupts (network, softclock). 691 * We check for ASTs first, just like the VAX. To avoid excess overhead 692 * the T_ASTFLT handling code will also check for software interrupts so we 693 * do not have to do it here. After identifying that we need an AST we 694 * drop the IPL to allow device interrupts. 695 * 696 * This code is complicated by the fact that sendsig may have been called 697 * necessitating a stack cleanup. 698 */ 699 700 .globl _astpending 701 .globl rei 702 rei: 703 #ifdef DIAGNOSTIC 704 tstl _panicstr | have we paniced? 705 jne Ldorte | yes, do not make matters worse 706 #endif 707 tstl _astpending | AST pending? 708 jeq Ldorte | no, done 709 Lrei1: 710 btst #5,sp@ | yes, are we returning to user mode? 711 jne Ldorte | no, done 712 movw #PSL_LOWIPL,sr | lower SPL 713 clrl sp@- | stack adjust 714 moveml #0xFFFF,sp@- | save all registers 715 movl usp,a1 | including 716 movl a1,sp@(FR_SP) | the users SP 717 clrl sp@- | VA == none 718 clrl sp@- | code == none 719 movl #T_ASTFLT,sp@- | type == async system trap 720 jbsr _trap | go handle it 721 lea sp@(12),sp | pop value args 722 movl sp@(FR_SP),a0 | restore user SP 723 movl a0,usp | from save area 724 movw sp@(FR_ADJ),d0 | need to adjust stack? 725 jne Laststkadj | yes, go to it 726 moveml sp@+,#0x7FFF | no, restore most user regs 727 addql #8,sp | toss SP and stack adjust 728 rte | and do real RTE 729 Laststkadj: 730 lea sp@(FR_HW),a1 | pointer to HW frame 731 addql #8,a1 | source pointer 732 movl a1,a0 | source 733 addw d0,a0 | + hole size = dest pointer 734 movl a1@-,a0@- | copy 735 movl a1@-,a0@- | 8 bytes 736 movl a0,sp@(FR_SP) | new SSP 737 moveml sp@+,#0x7FFF | restore user registers 738 movl sp@,sp | and our SP 739 Ldorte: 740 rte | real return 741 742 /* 743 * Initialization is at the beginning of this file, because the 744 * kernel entry point needs to be at zero for compatibility with 745 * the Sun boot loader. This works on Sun machines because the 746 * interrupt vector table for reset is NOT at address zero. 747 * (The MMU has a "boot" bit that forces access to the PROM) 748 */ 749 750 /* 751 * Signal "trampoline" code (18 bytes). Invoked from RTE setup by sendsig(). 752 * 753 * Stack looks like: 754 * 755 * sp+0 -> signal number 756 * sp+4 signal specific code 757 * sp+8 pointer to signal context frame (scp) 758 * sp+12 address of handler 759 * sp+16 saved hardware state 760 * . 761 * . 762 * scp+0-> beginning of signal context frame 763 */ 764 .globl _sigcode, _esigcode 765 .data 766 .align 2 767 _sigcode: /* Found at address: 0x0DFFffdc */ 768 movl sp@(12),a0 | signal handler addr (4 bytes) 769 jsr a0@ | call signal handler (2 bytes) 770 addql #4,sp | pop signo (2 bytes) 771 trap #1 | special syscall entry (2 bytes) 772 movl d0,sp@(4) | save errno (4 bytes) 773 moveq #1,d0 | syscall == exit (2 bytes) 774 trap #0 | exit(errno) (2 bytes) 775 .align 2 776 _esigcode: 777 .text 778 779 /* XXX - hp300 still has icode here... */ 780 781 /* 782 * Primitives 783 */ 784 #include <machine/asm.h> 785 786 /* 787 * non-local gotos 788 */ 789 ENTRY(setjmp) 790 movl sp@(4),a0 | savearea pointer 791 moveml #0xFCFC,a0@ | save d2-d7/a2-a7 792 movl sp@,a0@(48) | and return address 793 moveq #0,d0 | return 0 794 rts 795 796 ENTRY(longjmp) 797 movl sp@(4),a0 798 moveml a0@+,#0xFCFC 799 movl a0@,sp@ 800 moveq #1,d0 801 rts 802 803 /* 804 * The following primitives manipulate the run queues. 805 * _whichqs tells which of the 32 queues _qs have processes in them. 806 * Setrunqueue puts processes into queues, Remrunqueue removes them 807 * from queues. The running process is on no queue, other processes 808 * are on a queue related to p->p_priority, divided by 4 actually to 809 * shrink the 0-127 range of priorities into the 32 available queues. 810 */ 811 812 .globl _whichqs,_qs,_cnt,_panic 813 .globl _curproc 814 .comm _want_resched,4 815 816 /* 817 * setrunqueue(p) 818 * 819 * Call should be made at splclock(), and p->p_stat should be SRUN 820 */ 821 ENTRY(setrunqueue) 822 movl sp@(4),a0 823 #ifdef DIAGNOSTIC 824 tstl a0@(P_BACK) 825 jne Lset1 826 tstl a0@(P_WCHAN) 827 jne Lset1 828 cmpb #SRUN,a0@(P_STAT) 829 jne Lset1 830 #endif 831 clrl d0 832 movb a0@(P_PRIORITY),d0 833 lsrb #2,d0 834 movl _whichqs,d1 835 bset d0,d1 836 movl d1,_whichqs 837 lslb #3,d0 838 addl #_qs,d0 839 movl d0,a0@(P_FORW) 840 movl d0,a1 841 movl a1@(P_BACK),a0@(P_BACK) 842 movl a0,a1@(P_BACK) 843 movl a0@(P_BACK),a1 844 movl a0,a1@(P_FORW) 845 rts 846 #ifdef DIAGNOSTIC 847 Lset1: 848 movl #Lset2,sp@- 849 jbsr _panic 850 Lset2: 851 .asciz "setrunqueue" 852 .even 853 #endif 854 855 /* 856 * remrunqueue(p) 857 * 858 * Call should be made at splclock(). 859 */ 860 ENTRY(remrunqueue) 861 movl sp@(4),a0 | proc *p 862 clrl d0 863 movb a0@(P_PRIORITY),d0 864 lsrb #2,d0 865 movl _whichqs,d1 866 bclr d0,d1 | if ((d1 & (1 << d0)) == 0) 867 jeq Lrem2 | panic (empty queue) 868 movl d1,_whichqs 869 movl a0@(P_FORW),a1 870 movl a0@(P_BACK),a1@(P_BACK) 871 movl a0@(P_BACK),a1 872 movl a0@(P_FORW),a1@(P_FORW) 873 movl #_qs,a1 874 movl d0,d1 875 lslb #3,d1 876 addl d1,a1 877 cmpl a1@(P_FORW),a1 878 jeq Lrem1 879 movl _whichqs,d1 880 bset d0,d1 881 movl d1,_whichqs 882 Lrem1: 883 clrl a0@(P_BACK) 884 rts 885 Lrem2: 886 movl #Lrem3,sp@- 887 jbsr _panic 888 Lrem3: 889 .asciz "remrunqueue" 890 .even 891 892 | Message for Lbadsw panic 893 Lsw0: 894 .asciz "cpu_switch" 895 .even 896 897 .globl _curpcb 898 .globl _masterpaddr | XXX compatibility (debuggers) 899 .data 900 _masterpaddr: | XXX compatibility (debuggers) 901 _curpcb: 902 .long 0 903 .comm nullpcb,SIZEOF_PCB 904 .text 905 906 /* 907 * At exit of a process, do a cpu_switch for the last time. 908 * Switch to a safe stack and PCB, and deallocate the process's resources. 909 * The ipl is high enough to prevent the memory from being reallocated. 910 */ 911 ENTRY(switch_exit) 912 movl sp@(4),a0 | struct proc *p 913 movl #nullpcb,_curpcb | save state into garbage pcb 914 lea tmpstk,sp | goto a tmp stack 915 movl a0,sp@- | pass proc ptr down 916 917 /* Free old process's u-area. */ 918 movl #USPACE,sp@- | size of u-area 919 movl a0@(P_ADDR),sp@- | address of process's u-area 920 movl _kernel_map,sp@- | map it was allocated in 921 jbsr _kmem_free | deallocate it 922 lea sp@(12),sp | pop args 923 924 jra _cpu_switch 925 926 /* 927 * When no processes are on the runq, cpu_switch() branches to idle 928 * to wait for something to come ready. 929 */ 930 .data 931 .globl _Idle_count 932 _Idle_count: 933 .long 0 934 .text 935 936 .globl Idle 937 Lidle: 938 stop #PSL_LOWIPL 939 Idle: 940 movw #PSL_HIGHIPL,sr 941 addql #1, _Idle_count 942 tstl _whichqs 943 jeq Lidle 944 movw #PSL_LOWIPL,sr 945 jra Lsw1 946 947 Lbadsw: 948 movl #Lsw0,sp@- 949 jbsr _panic 950 /*NOTREACHED*/ 951 952 /* 953 * cpu_switch() 954 * Hacked for sun3 955 * XXX - Arg 1 is a proc pointer (curproc) but this doesn't use it. 956 * XXX - Sould we use p->p_addr instead of curpcb? -gwr 957 */ 958 ENTRY(cpu_switch) 959 movl _curpcb,a1 | current pcb 960 movw sr,a1@(PCB_PS) | save sr before changing ipl 961 #ifdef notyet 962 movl _curproc,sp@- | remember last proc running 963 #endif 964 clrl _curproc 965 966 Lsw1: 967 /* 968 * Find the highest-priority queue that isn't empty, 969 * then take the first proc from that queue. 970 */ 971 clrl d0 972 lea _whichqs,a0 973 movl a0@,d1 974 Lswchk: 975 btst d0,d1 976 jne Lswfnd 977 addqb #1,d0 978 cmpb #32,d0 979 jne Lswchk 980 jra Idle 981 Lswfnd: 982 movw #PSL_HIGHIPL,sr | lock out interrupts 983 movl a0@,d1 | and check again... 984 bclr d0,d1 985 jeq Lsw1 | proc moved, rescan 986 movl d1,a0@ | update whichqs 987 moveq #1,d1 | double check for higher priority 988 lsll d0,d1 | process (which may have snuck in 989 subql #1,d1 | while we were finding this one) 990 andl a0@,d1 991 jeq Lswok | no one got in, continue 992 movl a0@,d1 993 bset d0,d1 | otherwise put this one back 994 movl d1,a0@ 995 jra Lsw1 | and rescan 996 Lswok: 997 movl d0,d1 998 lslb #3,d1 | convert queue number to index 999 addl #_qs,d1 | locate queue (q) 1000 movl d1,a1 1001 cmpl a1@(P_FORW),a1 | anyone on queue? 1002 jeq Lbadsw | no, panic 1003 movl a1@(P_FORW),a0 | p = q->p_forw 1004 movl a0@(P_FORW),a1@(P_FORW) | q->p_forw = p->p_forw 1005 movl a0@(P_FORW),a1 | q = p->p_forw 1006 movl a0@(P_BACK),a1@(P_BACK) | q->p_back = p->p_back 1007 cmpl a0@(P_FORW),d1 | anyone left on queue? 1008 jeq Lsw2 | no, skip 1009 movl _whichqs,d1 1010 bset d0,d1 | yes, reset bit 1011 movl d1,_whichqs 1012 Lsw2: 1013 movl a0,_curproc 1014 clrl _want_resched 1015 #ifdef notyet 1016 movl sp@+,a1 | XXX - Make this work! 1017 cmpl a0,a1 | switching to same proc? 1018 jeq Lswdone | yes, skip save and restore 1019 #endif 1020 /* 1021 * Save state of previous process in its pcb. 1022 */ 1023 movl _curpcb,a1 1024 moveml #0xFCFC,a1@(PCB_REGS) | save non-scratch registers 1025 movl usp,a2 | grab USP (a2 has been saved) 1026 movl a2,a1@(PCB_USP) | and save it 1027 1028 tstl _fpu_type | Do we have an fpu? 1029 jeq Lswnofpsave | No? Then don't try save. 1030 lea a1@(PCB_FPCTX),a2 | pointer to FP save area 1031 fsave a2@ | save FP state 1032 tstb a2@ | null state frame? 1033 jeq Lswnofpsave | yes, all done 1034 fmovem fp0-fp7,a2@(FPF_REGS) | save FP general regs 1035 fmovem fpcr/fpsr/fpi,a2@(FPF_FPCR) | save FP control regs 1036 Lswnofpsave: 1037 1038 /* 1039 * Now that we have saved all the registers that must be 1040 * preserved, we are free to use those registers until 1041 * we load the registers for the switched-to process. 1042 * In this section, keep: a0=curproc, a1=curpcb 1043 */ 1044 1045 #ifdef DIAGNOSTIC 1046 tstl a0@(P_WCHAN) 1047 jne Lbadsw 1048 cmpb #SRUN,a0@(P_STAT) 1049 jne Lbadsw 1050 #endif 1051 clrl a0@(P_BACK) | clear back link 1052 movl a0@(P_ADDR),a1 | get p_addr 1053 movl a1,_curpcb 1054 1055 /* 1056 * Load the new VM context (new MMU root pointer) 1057 */ 1058 movl a0@(P_VMSPACE),a2 | vm = p->p_vmspace 1059 #ifdef DIAGNOSTIC 1060 tstl a2 | map == VM_MAP_NULL? 1061 jeq Lbadsw | panic 1062 #endif 1063 #ifdef PMAP_DEBUG 1064 /* 1065 * Just call pmap_activate() for now. Later on, 1066 * use the in-line version below (for speed). 1067 */ 1068 lea a2@(VM_PMAP),a2 | pmap = &vmspace.vm_pmap 1069 pea a2@ | push pmap 1070 jbsr _pmap_activate | pmap_activate(pmap) 1071 addql #4,sp 1072 movl _curpcb,a1 | restore p_addr 1073 #else 1074 /* XXX - Later, use this inline version. */ 1075 /* Just load the new CPU Root Pointer (MMU) */ 1076 lea _kernel_crp, a3 | our CPU Root Ptr. (CRP) 1077 lea a2@(VM_PMAP),a2 | pmap = &vmspace.vm_pmap 1078 movl a2@(PM_A_PHYS),d0 | phys = pmap->pm_a_phys 1079 cmpl a3@(4),d0 | == kernel_crp.rp_addr ? 1080 jeq Lsame_mmuctx | skip loadcrp/flush 1081 /* OK, it is a new MMU context. Load it up. */ 1082 movl d0,a3@(4) 1083 movl #CACHE_CLR,d0 1084 movc d0,cacr | invalidate cache(s) 1085 pflusha | flush entire TLB 1086 pmove a3@,crp | load new user root pointer 1087 Lsame_mmuctx: 1088 #endif 1089 1090 /* 1091 * Reload the registers for the new process. 1092 * After this point we can only use d0,d1,a0,a1 1093 */ 1094 moveml a1@(PCB_REGS),#0xFCFC | reload registers 1095 movl a1@(PCB_USP),a0 1096 movl a0,usp | and USP 1097 1098 tstl _fpu_type | If we don't have an fpu, 1099 jeq Lres_skip | don't try to restore it. 1100 lea a1@(PCB_FPCTX),a0 | pointer to FP save area 1101 tstb a0@ | null state frame? 1102 jeq Lresfprest | yes, easy 1103 fmovem a0@(FPF_FPCR),fpcr/fpsr/fpi | restore FP control regs 1104 fmovem a0@(FPF_REGS),fp0-fp7 | restore FP general regs 1105 Lresfprest: 1106 frestore a0@ | restore state 1107 Lres_skip: 1108 movw a1@(PCB_PS),d0 | no, restore PS 1109 #ifdef DIAGNOSTIC 1110 btst #13,d0 | supervisor mode? 1111 jeq Lbadsw | no? panic! 1112 #endif 1113 movw d0,sr | OK, restore PS 1114 moveq #1,d0 | return 1 (for alternate returns) 1115 rts 1116 1117 /* 1118 * savectx(pcb) 1119 * Update pcb, saving current processor state. 1120 */ 1121 ENTRY(savectx) 1122 movl sp@(4),a1 1123 movw sr,a1@(PCB_PS) 1124 movl usp,a0 | grab USP 1125 movl a0,a1@(PCB_USP) | and save it 1126 moveml #0xFCFC,a1@(PCB_REGS) | save non-scratch registers 1127 1128 tstl _fpu_type | Do we have FPU? 1129 jeq Lsavedone | No? Then don't save state. 1130 lea a1@(PCB_FPCTX),a0 | pointer to FP save area 1131 fsave a0@ | save FP state 1132 tstb a0@ | null state frame? 1133 jeq Lsavedone | yes, all done 1134 fmovem fp0-fp7,a0@(FPF_REGS) | save FP general regs 1135 fmovem fpcr/fpsr/fpi,a0@(FPF_FPCR) | save FP control regs 1136 Lsavedone: 1137 moveq #0,d0 | return 0 1138 rts 1139 1140 /* suline() `040 only */ 1141 1142 #ifdef DEBUG 1143 .data 1144 .globl fulltflush, fullcflush 1145 fulltflush: 1146 .long 0 1147 fullcflush: 1148 .long 0 1149 .text 1150 #endif 1151 1152 /* 1153 * Invalidate entire TLB. 1154 */ 1155 ENTRY(TBIA) 1156 __TBIA: 1157 pflusha 1158 movl #DC_CLEAR,d0 1159 movc d0,cacr | invalidate on-chip d-cache 1160 rts 1161 1162 /* 1163 * Invalidate any TLB entry for given VA (TB Invalidate Single) 1164 */ 1165 ENTRY(TBIS) 1166 #ifdef DEBUG 1167 tstl fulltflush | being conservative? 1168 jne __TBIA | yes, flush entire TLB 1169 #endif 1170 movl sp@(4),a0 1171 pflush #0,#0,a0@ | flush address from both sides 1172 movl #DC_CLEAR,d0 1173 movc d0,cacr | invalidate on-chip data cache 1174 rts 1175 1176 /* 1177 * Invalidate supervisor side of TLB 1178 */ 1179 ENTRY(TBIAS) 1180 #ifdef DEBUG 1181 tstl fulltflush | being conservative? 1182 jne __TBIA | yes, flush everything 1183 #endif 1184 pflush #4,#4 | flush supervisor TLB entries 1185 movl #DC_CLEAR,d0 1186 movc d0,cacr | invalidate on-chip d-cache 1187 rts 1188 1189 /* 1190 * Invalidate user side of TLB 1191 */ 1192 ENTRY(TBIAU) 1193 #ifdef DEBUG 1194 tstl fulltflush | being conservative? 1195 jne __TBIA | yes, flush everything 1196 #endif 1197 pflush #0,#4 | flush user TLB entries 1198 movl #DC_CLEAR,d0 1199 movc d0,cacr | invalidate on-chip d-cache 1200 rts 1201 1202 /* 1203 * Invalidate instruction cache 1204 */ 1205 ENTRY(ICIA) 1206 movl #IC_CLEAR,d0 1207 movc d0,cacr | invalidate i-cache 1208 rts 1209 1210 /* 1211 * Invalidate data cache. 1212 * NOTE: we do not flush 68030 on-chip cache as there are no aliasing 1213 * problems with DC_WA. The only cases we have to worry about are context 1214 * switch and TLB changes, both of which are handled "in-line" in resume 1215 * and TBI*. 1216 */ 1217 ENTRY(DCIA) 1218 __DCIA: 1219 rts 1220 1221 ENTRY(DCIS) 1222 __DCIS: 1223 rts 1224 1225 /* 1226 * Invalidate data cache. 1227 */ 1228 ENTRY(DCIU) 1229 rts 1230 1231 /* ICPL, ICPP, DCPL, DCPP, DCPA, DCFL, DCFP */ 1232 1233 ENTRY(PCIA) 1234 movl #DC_CLEAR,d0 1235 movc d0,cacr | invalidate on-chip d-cache 1236 rts 1237 1238 ENTRY(ecacheon) 1239 rts 1240 1241 ENTRY(ecacheoff) 1242 rts 1243 1244 /* 1245 * Get callers current SP value. 1246 * Note that simply taking the address of a local variable in a C function 1247 * doesn't work because callee saved registers may be outside the stack frame 1248 * defined by A6 (e.g. GCC generated code). 1249 * 1250 * [I don't think the ENTRY() macro will do the right thing with this -- glass] 1251 */ 1252 .globl _getsp 1253 _getsp: 1254 movl sp,d0 | get current SP 1255 addql #4,d0 | compensate for return address 1256 rts 1257 1258 ENTRY(getsfc) 1259 movc sfc,d0 1260 rts 1261 1262 ENTRY(getdfc) 1263 movc dfc,d0 1264 rts 1265 1266 ENTRY(getvbr) 1267 movc vbr, d0 1268 rts 1269 1270 ENTRY(setvbr) 1271 movl sp@(4), d0 1272 movc d0, vbr 1273 rts 1274 1275 /* 1276 * Load a new CPU Root Pointer (CRP) into the MMU. 1277 * void loadcrp(struct mmu_rootptr *); 1278 */ 1279 ENTRY(loadcrp) 1280 movl sp@(4),a0 | arg1: &CRP 1281 movl #CACHE_CLR,d0 1282 movc d0,cacr | invalidate cache(s) 1283 pflusha | flush entire TLB 1284 pmove a0@,crp | load new user root pointer 1285 rts 1286 1287 /* 1288 * Set processor priority level calls. Most are implemented with 1289 * inline asm expansions. However, we need one instantiation here 1290 * in case some non-optimized code makes external references. 1291 * Most places will use the inlined function param.h supplies. 1292 */ 1293 1294 ENTRY(_spl) 1295 movl sp@(4),d1 1296 clrl d0 1297 movw sr,d0 1298 movw d1,sr 1299 rts 1300 1301 ENTRY(getsr) 1302 moveq #0, d0 1303 movw sr, d0 1304 rts 1305 1306 ENTRY(_insque) 1307 movw sr,d0 1308 movw #PSL_HIGHIPL,sr | atomic 1309 movl sp@(8),a0 | where to insert (after) 1310 movl sp@(4),a1 | element to insert (e) 1311 movl a0@,a1@ | e->next = after->next 1312 movl a0,a1@(4) | e->prev = after 1313 movl a1,a0@ | after->next = e 1314 movl a1@,a0 1315 movl a1,a0@(4) | e->next->prev = e 1316 movw d0,sr 1317 rts 1318 1319 ENTRY(_remque) 1320 movw sr,d0 1321 movw #PSL_HIGHIPL,sr | atomic 1322 movl sp@(4),a0 | element to remove (e) 1323 movl a0@,a1 1324 movl a0@(4),a0 1325 movl a0,a1@(4) | e->next->prev = e->prev 1326 movl a1,a0@ | e->prev->next = e->next 1327 movw d0,sr 1328 rts 1329 1330 /* 1331 * Save and restore 68881 state. 1332 */ 1333 ENTRY(m68881_save) 1334 movl sp@(4),a0 | save area pointer 1335 fsave a0@ | save state 1336 tstb a0@ | null state frame? 1337 jeq Lm68881sdone | yes, all done 1338 fmovem fp0-fp7,a0@(FPF_REGS) | save FP general regs 1339 fmovem fpcr/fpsr/fpi,a0@(FPF_FPCR) | save FP control regs 1340 Lm68881sdone: 1341 rts 1342 1343 ENTRY(m68881_restore) 1344 movl sp@(4),a0 | save area pointer 1345 tstb a0@ | null state frame? 1346 jeq Lm68881rdone | yes, easy 1347 fmovem a0@(FPF_FPCR),fpcr/fpsr/fpi | restore FP control regs 1348 fmovem a0@(FPF_REGS),fp0-fp7 | restore FP general regs 1349 Lm68881rdone: 1350 frestore a0@ | restore state 1351 rts 1352 1353 /* 1354 * _delay(unsigned N) 1355 * Delay for at least (N/256) microseconds. 1356 * This routine depends on the variable: delay_divisor 1357 * which should be set based on the CPU clock rate. 1358 * XXX: Currently this is set in sun3_startup.c based on the 1359 * XXX: CPU model but this should be determined at run time... 1360 */ 1361 .globl __delay 1362 __delay: 1363 | d0 = arg = (usecs << 8) 1364 movl sp@(4),d0 1365 | d1 = delay_divisor; 1366 movl _delay_divisor,d1 1367 L_delay: 1368 subl d1,d0 1369 jgt L_delay 1370 rts 1371 1372 1373 | Define some addresses, mostly so DDB can print useful info. 1374 .globl _kernbase 1375 .set _kernbase,KERNBASE 1376 .globl _dvma_base 1377 .set _dvma_base,DVMA_SPACE_START 1378 .globl _prom_start 1379 .set _prom_start,MONSTART 1380 .globl _prom_base 1381 .set _prom_base,PROM_BASE 1382 1383 |The end! 1384
Indexes created Tue Oct 07 21:09:53 GMT 2025