Home | History | Annotate | Line # | Download | only in sun3x
machdep.c revision 1.71.2.3
      1  1.71.2.3  jdolecek /*	$NetBSD: machdep.c,v 1.71.2.3 2002/06/23 17:42:46 jdolecek Exp $	*/
      2       1.1       gwr 
      3       1.1       gwr /*
      4       1.1       gwr  * Copyright (c) 1988 University of Utah.
      5       1.1       gwr  * Copyright (c) 1982, 1986, 1990, 1993
      6       1.1       gwr  *	The Regents of the University of California.  All rights reserved.
      7       1.1       gwr  *
      8       1.1       gwr  * This code is derived from software contributed to Berkeley by
      9       1.1       gwr  * the Systems Programming Group of the University of Utah Computer
     10       1.1       gwr  * Science Department.
     11       1.1       gwr  *
     12       1.1       gwr  * Redistribution and use in source and binary forms, with or without
     13       1.1       gwr  * modification, are permitted provided that the following conditions
     14       1.1       gwr  * are met:
     15       1.1       gwr  * 1. Redistributions of source code must retain the above copyright
     16       1.1       gwr  *    notice, this list of conditions and the following disclaimer.
     17       1.1       gwr  * 2. Redistributions in binary form must reproduce the above copyright
     18       1.1       gwr  *    notice, this list of conditions and the following disclaimer in the
     19       1.1       gwr  *    documentation and/or other materials provided with the distribution.
     20       1.1       gwr  * 3. All advertising materials mentioning features or use of this software
     21       1.1       gwr  *    must display the following acknowledgement:
     22       1.1       gwr  *	This product includes software developed by the University of
     23       1.1       gwr  *	California, Berkeley and its contributors.
     24       1.1       gwr  * 4. Neither the name of the University nor the names of its contributors
     25       1.1       gwr  *    may be used to endorse or promote products derived from this software
     26       1.1       gwr  *    without specific prior written permission.
     27       1.1       gwr  *
     28       1.1       gwr  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     29       1.1       gwr  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     30       1.1       gwr  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     31       1.1       gwr  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     32       1.1       gwr  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     33       1.1       gwr  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     34       1.1       gwr  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     35       1.1       gwr  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     36       1.1       gwr  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     37       1.1       gwr  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     38       1.1       gwr  * SUCH DAMAGE.
     39       1.1       gwr  *
     40       1.1       gwr  *	from: Utah Hdr: machdep.c 1.74 92/12/20
     41       1.1       gwr  *	from: @(#)machdep.c	8.10 (Berkeley) 4/20/94
     42       1.1       gwr  */
     43       1.1       gwr 
     44      1.35  jonathan #include "opt_ddb.h"
     45      1.69     lukem #include "opt_kgdb.h"
     46      1.34       gwr 
     47       1.1       gwr #include <sys/param.h>
     48       1.1       gwr #include <sys/systm.h>
     49       1.1       gwr #include <sys/kernel.h>
     50       1.1       gwr #include <sys/map.h>
     51       1.1       gwr #include <sys/proc.h>
     52       1.1       gwr #include <sys/buf.h>
     53       1.1       gwr #include <sys/reboot.h>
     54       1.1       gwr #include <sys/conf.h>
     55       1.1       gwr #include <sys/file.h>
     56       1.1       gwr #include <sys/clist.h>
     57      1.37    kleink #include <sys/device.h>
     58       1.1       gwr #include <sys/malloc.h>
     59       1.1       gwr #include <sys/mbuf.h>
     60       1.1       gwr #include <sys/msgbuf.h>
     61       1.1       gwr #include <sys/ioctl.h>
     62       1.1       gwr #include <sys/tty.h>
     63       1.1       gwr #include <sys/mount.h>
     64       1.1       gwr #include <sys/user.h>
     65       1.1       gwr #include <sys/exec.h>
     66       1.1       gwr #include <sys/core.h>
     67       1.1       gwr #include <sys/kcore.h>
     68       1.1       gwr #include <sys/vnode.h>
     69       1.1       gwr #include <sys/syscallargs.h>
     70       1.8       gwr #ifdef	KGDB
     71       1.8       gwr #include <sys/kgdb.h>
     72       1.8       gwr #endif
     73      1.26   hannken 
     74      1.42       mrg #include <uvm/uvm_extern.h>
     75      1.34       gwr 
     76      1.26   hannken #include <sys/sysctl.h>
     77       1.1       gwr 
     78       1.1       gwr #include <dev/cons.h>
     79       1.1       gwr 
     80       1.1       gwr #include <machine/cpu.h>
     81      1.29       gwr #include <machine/dvma.h>
     82      1.29       gwr #include <machine/idprom.h>
     83      1.29       gwr #include <machine/kcore.h>
     84       1.1       gwr #include <machine/reg.h>
     85       1.1       gwr #include <machine/psl.h>
     86       1.1       gwr #include <machine/pte.h>
     87      1.29       gwr 
     88      1.41    kleink #if defined(DDB)
     89       1.1       gwr #include <machine/db_machdep.h>
     90      1.33       gwr #include <ddb/db_sym.h>
     91      1.32        tv #include <ddb/db_extern.h>
     92      1.41    kleink #endif
     93       1.1       gwr 
     94      1.29       gwr #include <sun3/sun3/machdep.h>
     95       1.1       gwr 
     96       1.1       gwr /* Defined in locore.s */
     97       1.1       gwr extern char kernel_text[];
     98       1.1       gwr /* Defined by the linker */
     99       1.1       gwr extern char etext[];
    100      1.56   thorpej 
    101      1.56   thorpej /* Our exported CPU info; we can have only one. */
    102      1.56   thorpej struct cpu_info cpu_info_store;
    103       1.1       gwr 
    104      1.70       chs struct vm_map *exec_map = NULL;
    105      1.70       chs struct vm_map *mb_map = NULL;
    106      1.70       chs struct vm_map *phys_map = NULL;
    107      1.34       gwr 
    108       1.1       gwr int	physmem;
    109       1.9       gwr int	fputype;
    110      1.22       leo caddr_t	msgbufaddr;
    111       1.1       gwr 
    112      1.29       gwr /* Virtual page frame for /dev/mem (see mem.c) */
    113  1.71.2.1   thorpej vaddr_t vmmap;
    114       1.1       gwr 
    115  1.71.2.3  jdolecek union sun3sir sun3sir;
    116  1.71.2.3  jdolecek 
    117       1.1       gwr /*
    118       1.1       gwr  * safepri is a safe priority for sleep to set for a spin-wait
    119       1.1       gwr  * during autoconfiguration or after a panic.
    120       1.1       gwr  */
    121       1.1       gwr int	safepri = PSL_LOWIPL;
    122       1.1       gwr 
    123      1.29       gwr u_char cpu_machine_id = 0;
    124      1.15       gwr char *cpu_string = NULL;
    125      1.15       gwr int cpu_has_vme = 0;
    126      1.15       gwr int has_iocache = 0;
    127      1.15       gwr 
    128      1.66       chs vaddr_t dumppage;
    129      1.66       chs 
    130       1.1       gwr static void identifycpu __P((void));
    131       1.1       gwr static void initcpu __P((void));
    132       1.1       gwr 
    133       1.1       gwr /*
    134       1.1       gwr  * Console initialization: called early on from main,
    135      1.15       gwr  * before vm init or cpu_startup.  This system is able
    136      1.29       gwr  * to use the console for output immediately (via PROM)
    137      1.29       gwr  * but can not use it for input until after this point.
    138       1.1       gwr  */
    139       1.8       gwr void
    140       1.8       gwr consinit()
    141       1.1       gwr {
    142      1.29       gwr 
    143      1.29       gwr 	/*
    144      1.29       gwr 	 * Switch from the PROM console (output only)
    145      1.29       gwr 	 * to our own console driver.
    146      1.29       gwr 	 */
    147      1.29       gwr 	cninit();
    148       1.1       gwr 
    149       1.1       gwr #ifdef DDB
    150      1.32        tv 	{
    151      1.63       chs 		extern int nsym;
    152      1.63       chs 		extern char *ssym, *esym;
    153      1.32        tv 
    154      1.63       chs 		ddb_init(nsym, ssym, esym);
    155      1.32        tv 	}
    156  1.71.2.1   thorpej #endif	/* DDB */
    157      1.31       gwr 
    158      1.31       gwr 	/*
    159      1.31       gwr 	 * Now that the console can do input as well as
    160      1.31       gwr 	 * output, consider stopping for a debugger.
    161      1.31       gwr 	 */
    162      1.31       gwr 	if (boothowto & RB_KDB) {
    163      1.31       gwr #ifdef KGDB
    164      1.31       gwr 		/* XXX - Ask on console for kgdb_dev? */
    165      1.31       gwr 		/* Note: this will just return if kgdb_dev==NODEV */
    166      1.31       gwr 		kgdb_connect(1);
    167      1.31       gwr #else	/* KGDB */
    168      1.31       gwr 		/* Either DDB or no debugger (just PROM). */
    169       1.1       gwr 		Debugger();
    170      1.31       gwr #endif	/* KGDB */
    171      1.31       gwr 	}
    172       1.1       gwr }
    173       1.1       gwr 
    174       1.1       gwr /*
    175       1.1       gwr  * cpu_startup: allocate memory for variable-sized tables,
    176       1.1       gwr  * initialize cpu, and do autoconfiguration.
    177       1.1       gwr  *
    178       1.1       gwr  * This is called early in init_main.c:main(), after the
    179       1.1       gwr  * kernel memory allocator is ready for use, but before
    180       1.1       gwr  * the creation of processes 1,2, and mountroot, etc.
    181       1.1       gwr  */
    182       1.1       gwr void
    183       1.1       gwr cpu_startup()
    184       1.1       gwr {
    185       1.1       gwr 	caddr_t v;
    186       1.1       gwr 	int sz, i;
    187  1.71.2.1   thorpej 	vsize_t size;
    188       1.1       gwr 	int base, residual;
    189  1.71.2.1   thorpej 	vaddr_t minaddr, maxaddr;
    190      1.50     lukem 	char pbuf[9];
    191       1.1       gwr 
    192       1.1       gwr 	/*
    193       1.1       gwr 	 * Initialize message buffer (for kernel printf).
    194       1.1       gwr 	 * This is put in physical page zero so it will
    195       1.1       gwr 	 * always be in the same place after a reboot.
    196       1.1       gwr 	 * Its mapping was prepared in pmap_bootstrap().
    197       1.1       gwr 	 * Also, offset some to avoid PROM scribbles.
    198       1.1       gwr 	 */
    199       1.1       gwr 	v = (caddr_t) KERNBASE;
    200      1.23       gwr 	msgbufaddr = (caddr_t)(v + MSGBUFOFF);
    201      1.23       gwr 	initmsgbuf(msgbufaddr, MSGBUFSIZE);
    202       1.1       gwr 
    203       1.1       gwr 	/*
    204       1.1       gwr 	 * Good {morning,afternoon,evening,night}.
    205       1.1       gwr 	 */
    206       1.1       gwr 	printf(version);
    207       1.1       gwr 	identifycpu();
    208       1.1       gwr 	initfpu();	/* also prints FPU type */
    209       1.1       gwr 
    210      1.50     lukem 	format_bytes(pbuf, sizeof(pbuf), ctob(physmem));
    211      1.50     lukem 	printf("total memory = %s\n", pbuf);
    212       1.1       gwr 
    213       1.1       gwr 	/*
    214      1.66       chs 	 * Get scratch page for dumpsys().
    215      1.66       chs 	 */
    216      1.66       chs 	if ((dumppage = uvm_km_alloc(kernel_map, NBPG)) == 0)
    217      1.66       chs 		panic("startup: alloc dumppage");
    218      1.66       chs 
    219      1.66       chs 	/*
    220       1.1       gwr 	 * Find out how much space we need, allocate it,
    221       1.1       gwr 	 * and then give everything true virtual addresses.
    222       1.1       gwr 	 */
    223      1.50     lukem 	sz = (int)allocsys(NULL, NULL);
    224      1.42       mrg 	if ((v = (caddr_t)uvm_km_alloc(kernel_map, round_page(sz))) == 0)
    225       1.1       gwr 		panic("startup: no room for tables");
    226      1.50     lukem 	if (allocsys(v, NULL) - v != sz)
    227       1.1       gwr 		panic("startup: table size inconsistency");
    228       1.1       gwr 
    229       1.1       gwr 	/*
    230       1.1       gwr 	 * Now allocate buffers proper.  They are different than the above
    231       1.1       gwr 	 * in that they usually occupy more virtual memory than physical.
    232       1.1       gwr 	 */
    233       1.1       gwr 	size = MAXBSIZE * nbuf;
    234  1.71.2.1   thorpej 	if (uvm_map(kernel_map, (vaddr_t *) &buffers, round_page(size),
    235      1.60   thorpej 		    NULL, UVM_UNKNOWN_OFFSET, 0,
    236      1.34       gwr 		    UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE, UVM_INH_NONE,
    237      1.64       chs 				UVM_ADV_NORMAL, 0)) != 0)
    238      1.34       gwr 		panic("startup: cannot allocate VM for buffers");
    239  1.71.2.1   thorpej 	minaddr = (vaddr_t)buffers;
    240       1.1       gwr 	if ((bufpages / nbuf) >= btoc(MAXBSIZE)) {
    241       1.1       gwr 		/* don't want to alloc more physical mem than needed */
    242       1.1       gwr 		bufpages = btoc(MAXBSIZE) * nbuf;
    243       1.1       gwr 	}
    244       1.1       gwr 	base = bufpages / nbuf;
    245       1.1       gwr 	residual = bufpages % nbuf;
    246       1.1       gwr 	for (i = 0; i < nbuf; i++) {
    247  1.71.2.1   thorpej 		vsize_t curbufsize;
    248  1.71.2.1   thorpej 		vaddr_t curbuf;
    249      1.34       gwr 		struct vm_page *pg;
    250      1.34       gwr 
    251      1.34       gwr 		/*
    252      1.34       gwr 		 * Each buffer has MAXBSIZE bytes of VM space allocated.  Of
    253      1.34       gwr 		 * that MAXBSIZE space, we allocate and map (base+1) pages
    254      1.34       gwr 		 * for the first "residual" buffers, and then we allocate
    255      1.34       gwr 		 * "base" pages for the rest.
    256      1.34       gwr 		 */
    257  1.71.2.1   thorpej 		curbuf = (vaddr_t) buffers + (i * MAXBSIZE);
    258      1.54     ragge 		curbufsize = NBPG * ((i < residual) ? (base+1) : base);
    259      1.34       gwr 
    260      1.34       gwr 		while (curbufsize) {
    261      1.47       chs 			pg = uvm_pagealloc(NULL, 0, NULL, 0);
    262      1.34       gwr 			if (pg == NULL)
    263      1.34       gwr 				panic("cpu_startup: not enough memory for "
    264      1.34       gwr 				    "buffer cache");
    265      1.52       chs 			pmap_kenter_pa(curbuf, VM_PAGE_TO_PHYS(pg),
    266      1.52       chs 				       VM_PROT_READ|VM_PROT_WRITE);
    267      1.34       gwr 			curbuf += PAGE_SIZE;
    268      1.34       gwr 			curbufsize -= PAGE_SIZE;
    269      1.34       gwr 		}
    270       1.1       gwr 	}
    271  1.71.2.1   thorpej 	pmap_update(pmap_kernel());
    272       1.1       gwr 
    273       1.1       gwr 	/*
    274       1.1       gwr 	 * Allocate a submap for exec arguments.  This map effectively
    275       1.1       gwr 	 * limits the number of processes exec'ing at any time.
    276       1.1       gwr 	 */
    277      1.34       gwr 	exec_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
    278      1.51   thorpej 				   16*NCARGS, VM_MAP_PAGEABLE, FALSE, NULL);
    279       1.1       gwr 
    280       1.1       gwr 	/*
    281       1.1       gwr 	 * We don't use a submap for physio, and use a separate map
    282       1.1       gwr 	 * for DVMA allocations.  Our vmapbuf just maps pages into
    283       1.1       gwr 	 * the kernel map (any kernel mapping is OK) and then the
    284       1.1       gwr 	 * device drivers clone the kernel mappings into DVMA space.
    285       1.1       gwr 	 */
    286       1.1       gwr 
    287       1.1       gwr 	/*
    288      1.12   thorpej 	 * Finally, allocate mbuf cluster submap.
    289       1.1       gwr 	 */
    290      1.39   thorpej 	mb_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
    291      1.51   thorpej 				 nmbclusters * mclbytes, VM_MAP_INTRSAFE,
    292      1.51   thorpej 				 FALSE, NULL);
    293       1.1       gwr 
    294      1.50     lukem 	format_bytes(pbuf, sizeof(pbuf), ptoa(uvmexp.free));
    295      1.50     lukem 	printf("avail memory = %s\n", pbuf);
    296      1.54     ragge 	format_bytes(pbuf, sizeof(pbuf), bufpages * NBPG);
    297      1.50     lukem 	printf("using %d buffers containing %s of memory\n", nbuf, pbuf);
    298       1.1       gwr 
    299       1.1       gwr 	/*
    300       1.1       gwr 	 * Allocate a virtual page (for use by /dev/mem)
    301       1.1       gwr 	 * This page is handed to pmap_enter() therefore
    302       1.1       gwr 	 * it has to be in the normal kernel VA range.
    303       1.1       gwr 	 */
    304      1.34       gwr 	vmmap = uvm_km_valloc_wait(kernel_map, NBPG);
    305       1.1       gwr 
    306       1.1       gwr 	/*
    307       1.1       gwr 	 * Create the DVMA maps.
    308       1.1       gwr 	 */
    309       1.1       gwr 	dvma_init();
    310       1.1       gwr 
    311       1.1       gwr 	/*
    312       1.1       gwr 	 * Set up CPU-specific registers, cache, etc.
    313       1.1       gwr 	 */
    314       1.1       gwr 	initcpu();
    315       1.1       gwr 
    316       1.1       gwr 	/*
    317       1.1       gwr 	 * Set up buffers, so they can be used to read disk labels.
    318       1.1       gwr 	 */
    319       1.1       gwr 	bufinit();
    320       1.1       gwr }
    321       1.1       gwr 
    322       1.1       gwr /*
    323       1.1       gwr  * Set registers on exec.
    324       1.1       gwr  */
    325       1.1       gwr void
    326      1.19   mycroft setregs(p, pack, stack)
    327      1.34       gwr 	struct proc *p;
    328       1.1       gwr 	struct exec_package *pack;
    329       1.1       gwr 	u_long stack;
    330       1.1       gwr {
    331       1.5       gwr 	struct trapframe *tf = (struct trapframe *)p->p_md.md_regs;
    332       1.1       gwr 
    333      1.21   mycroft 	tf->tf_sr = PSL_USERSET;
    334       1.5       gwr 	tf->tf_pc = pack->ep_entry & ~1;
    335      1.20   mycroft 	tf->tf_regs[D0] = 0;
    336      1.20   mycroft 	tf->tf_regs[D1] = 0;
    337      1.20   mycroft 	tf->tf_regs[D2] = 0;
    338      1.20   mycroft 	tf->tf_regs[D3] = 0;
    339      1.20   mycroft 	tf->tf_regs[D4] = 0;
    340      1.20   mycroft 	tf->tf_regs[D5] = 0;
    341      1.20   mycroft 	tf->tf_regs[D6] = 0;
    342      1.20   mycroft 	tf->tf_regs[D7] = 0;
    343      1.20   mycroft 	tf->tf_regs[A0] = 0;
    344      1.20   mycroft 	tf->tf_regs[A1] = 0;
    345  1.71.2.3  jdolecek 	tf->tf_regs[A2] = (int)p->p_psstr;
    346      1.20   mycroft 	tf->tf_regs[A3] = 0;
    347      1.20   mycroft 	tf->tf_regs[A4] = 0;
    348      1.20   mycroft 	tf->tf_regs[A5] = 0;
    349      1.20   mycroft 	tf->tf_regs[A6] = 0;
    350       1.5       gwr 	tf->tf_regs[SP] = stack;
    351       1.1       gwr 
    352       1.1       gwr 	/* restore a null state frame */
    353       1.1       gwr 	p->p_addr->u_pcb.pcb_fpregs.fpf_null = 0;
    354      1.19   mycroft 	if (fputype)
    355       1.1       gwr 		m68881_restore(&p->p_addr->u_pcb.pcb_fpregs);
    356      1.19   mycroft 
    357       1.1       gwr 	p->p_md.md_flags = 0;
    358       1.1       gwr }
    359       1.1       gwr 
    360       1.1       gwr /*
    361       1.1       gwr  * Info for CTL_HW
    362       1.1       gwr  */
    363      1.46       gwr char	machine[16] = MACHINE;		/* from <machine/param.h> */
    364      1.46       gwr char	kernel_arch[16] = "sun3x";	/* XXX needs a sysctl node */
    365       1.1       gwr char	cpu_model[120];
    366      1.15       gwr 
    367      1.15       gwr /*
    368      1.15       gwr  * XXX - Should empirically estimate the divisor...
    369      1.15       gwr  * Note that the value of delay_divisor is roughly
    370      1.15       gwr  * 2048 / cpuclock	(where cpuclock is in MHz).
    371      1.15       gwr  */
    372      1.16       gwr int delay_divisor = 62;		/* assume the fastest (33 MHz) */
    373       1.1       gwr 
    374       1.1       gwr void
    375       1.1       gwr identifycpu()
    376       1.1       gwr {
    377      1.29       gwr 	u_char machtype;
    378       1.1       gwr 
    379      1.15       gwr 	machtype = identity_prom.idp_machtype;
    380      1.29       gwr 	if ((machtype & IDM_ARCH_MASK) != IDM_ARCH_SUN3X) {
    381      1.29       gwr 		printf("Bad IDPROM arch!\n");
    382      1.15       gwr 		sunmon_abort();
    383      1.15       gwr 	}
    384      1.15       gwr 
    385      1.29       gwr 	cpu_machine_id = machtype;
    386      1.15       gwr 	switch (cpu_machine_id) {
    387      1.15       gwr 
    388      1.15       gwr 	case SUN3X_MACH_80:
    389      1.15       gwr 		cpu_string = "80";  	/* Hydra */
    390      1.16       gwr 		delay_divisor = 102;	/* 20 MHz */
    391      1.15       gwr 		cpu_has_vme = FALSE;
    392      1.15       gwr 		break;
    393      1.15       gwr 
    394      1.15       gwr 	case SUN3X_MACH_470:
    395      1.15       gwr 		cpu_string = "470"; 	/* Pegasus */
    396      1.15       gwr 		delay_divisor = 62; 	/* 33 MHz */
    397      1.15       gwr 		cpu_has_vme = TRUE;
    398      1.15       gwr 		break;
    399      1.15       gwr 
    400      1.15       gwr 	default:
    401      1.15       gwr 		printf("unknown sun3x model\n");
    402      1.15       gwr 		sunmon_abort();
    403      1.15       gwr 	}
    404      1.15       gwr 
    405      1.15       gwr 	/* Other stuff? (VAC, mc6888x version, etc.) */
    406      1.46       gwr 	/* Note: miniroot cares about the kernel_arch part. */
    407      1.46       gwr 	sprintf(cpu_model, "%s %s", kernel_arch, cpu_string);
    408       1.1       gwr 
    409      1.29       gwr 	printf("Model: %s\n", cpu_model);
    410       1.1       gwr }
    411       1.1       gwr 
    412       1.1       gwr /*
    413       1.1       gwr  * machine dependent system variables.
    414       1.1       gwr  */
    415       1.1       gwr int
    416       1.1       gwr cpu_sysctl(name, namelen, oldp, oldlenp, newp, newlen, p)
    417       1.1       gwr 	int *name;
    418       1.1       gwr 	u_int namelen;
    419       1.1       gwr 	void *oldp;
    420       1.1       gwr 	size_t *oldlenp;
    421       1.1       gwr 	void *newp;
    422       1.1       gwr 	size_t newlen;
    423       1.1       gwr 	struct proc *p;
    424       1.1       gwr {
    425       1.1       gwr 	int error;
    426       1.1       gwr 	dev_t consdev;
    427       1.1       gwr 
    428       1.1       gwr 	/* all sysctl names at this level are terminal */
    429       1.1       gwr 	if (namelen != 1)
    430       1.1       gwr 		return (ENOTDIR);		/* overloaded */
    431       1.1       gwr 
    432       1.1       gwr 	switch (name[0]) {
    433       1.1       gwr 	case CPU_CONSDEV:
    434       1.1       gwr 		if (cn_tab != NULL)
    435       1.1       gwr 			consdev = cn_tab->cn_dev;
    436       1.1       gwr 		else
    437       1.1       gwr 			consdev = NODEV;
    438       1.1       gwr 		error = sysctl_rdstruct(oldp, oldlenp, newp,
    439       1.1       gwr 		    &consdev, sizeof consdev);
    440       1.1       gwr 		break;
    441       1.1       gwr 
    442       1.1       gwr #if 0	/* XXX - Not yet... */
    443       1.1       gwr 	case CPU_ROOT_DEVICE:
    444       1.1       gwr 		error = sysctl_rdstring(oldp, oldlenp, newp, root_device);
    445       1.1       gwr 		break;
    446       1.1       gwr 
    447       1.1       gwr 	case CPU_BOOTED_KERNEL:
    448       1.1       gwr 		error = sysctl_rdstring(oldp, oldlenp, newp, booted_kernel);
    449       1.1       gwr 		break;
    450       1.1       gwr #endif
    451       1.1       gwr 
    452       1.1       gwr 	default:
    453       1.1       gwr 		error = EOPNOTSUPP;
    454       1.1       gwr 	}
    455       1.1       gwr 	return (error);
    456       1.1       gwr }
    457       1.1       gwr 
    458       1.7       gwr /* See: sig_machdep.c */
    459       1.1       gwr 
    460       1.1       gwr /*
    461       1.1       gwr  * Do a sync in preparation for a reboot.
    462       1.1       gwr  * XXX - This could probably be common code.
    463       1.1       gwr  * XXX - And now, most of it is in vfs_shutdown()
    464       1.1       gwr  * XXX - Put waittime checks in there too?
    465       1.1       gwr  */
    466       1.1       gwr int waittime = -1;	/* XXX - Who else looks at this? -gwr */
    467       1.1       gwr static void
    468       1.1       gwr reboot_sync __P((void))
    469       1.1       gwr {
    470       1.1       gwr 
    471       1.1       gwr 	/* Check waittime here to localize its use to this function. */
    472       1.1       gwr 	if (waittime >= 0)
    473       1.1       gwr 		return;
    474       1.1       gwr 	waittime = 0;
    475       1.1       gwr 	vfs_shutdown();
    476       1.1       gwr }
    477       1.1       gwr 
    478       1.1       gwr /*
    479       1.1       gwr  * Common part of the BSD and SunOS reboot system calls.
    480       1.1       gwr  */
    481       1.1       gwr __dead void
    482      1.11       gwr cpu_reboot(howto, user_boot_string)
    483       1.1       gwr 	int howto;
    484       1.1       gwr 	char *user_boot_string;
    485       1.1       gwr {
    486       1.2       gwr 	/* Note: this string MUST be static! */
    487       1.2       gwr 	static char bootstr[128];
    488       1.2       gwr 	char *p;
    489       1.1       gwr 
    490       1.1       gwr 	/* If system is cold, just halt. (early panic?) */
    491       1.1       gwr 	if (cold)
    492       1.1       gwr 		goto haltsys;
    493       1.1       gwr 
    494      1.24       gwr 	/* Un-blank the screen if appropriate. */
    495      1.24       gwr 	cnpollc(1);
    496      1.24       gwr 
    497       1.1       gwr 	if ((howto & RB_NOSYNC) == 0) {
    498       1.1       gwr 		reboot_sync();
    499       1.1       gwr 		/*
    500       1.1       gwr 		 * If we've been adjusting the clock, the todr
    501       1.1       gwr 		 * will be out of synch; adjust it now.
    502       1.1       gwr 		 *
    503       1.1       gwr 		 * XXX - However, if the kernel has been sitting in ddb,
    504       1.1       gwr 		 * the time will be way off, so don't set the HW clock!
    505       1.1       gwr 		 * XXX - Should do sanity check against HW clock. -gwr
    506       1.1       gwr 		 */
    507       1.1       gwr 		/* resettodr(); */
    508       1.1       gwr 	}
    509       1.1       gwr 
    510       1.1       gwr 	/* Disable interrupts. */
    511       1.1       gwr 	splhigh();
    512       1.1       gwr 
    513       1.1       gwr 	/* Write out a crash dump if asked. */
    514       1.1       gwr 	if (howto & RB_DUMP)
    515       1.1       gwr 		dumpsys();
    516       1.1       gwr 
    517       1.1       gwr 	/* run any shutdown hooks */
    518       1.1       gwr 	doshutdownhooks();
    519       1.1       gwr 
    520       1.1       gwr 	if (howto & RB_HALT) {
    521       1.1       gwr 	haltsys:
    522      1.63       chs 		printf("halted.\n");
    523      1.61   tsutsui 		sunmon_halt();
    524       1.1       gwr 	}
    525       1.1       gwr 
    526       1.1       gwr 	/*
    527       1.1       gwr 	 * Automatic reboot.
    528       1.1       gwr 	 */
    529       1.2       gwr 	if (user_boot_string)
    530       1.2       gwr 		strncpy(bootstr, user_boot_string, sizeof(bootstr));
    531       1.2       gwr 	else {
    532       1.1       gwr 		/*
    533       1.1       gwr 		 * Build our own boot string with an empty
    534       1.1       gwr 		 * boot device/file and (maybe) some flags.
    535       1.1       gwr 		 * The PROM will supply the device/file name.
    536       1.1       gwr 		 */
    537       1.2       gwr 		p = bootstr;
    538       1.2       gwr 		*p = '\0';
    539       1.1       gwr 		if (howto & (RB_KDB|RB_ASKNAME|RB_SINGLE)) {
    540       1.1       gwr 			/* Append the boot flags. */
    541       1.1       gwr 			*p++ = ' ';
    542       1.1       gwr 			*p++ = '-';
    543       1.1       gwr 			if (howto & RB_KDB)
    544       1.1       gwr 				*p++ = 'd';
    545       1.1       gwr 			if (howto & RB_ASKNAME)
    546       1.1       gwr 				*p++ = 'a';
    547       1.1       gwr 			if (howto & RB_SINGLE)
    548       1.1       gwr 				*p++ = 's';
    549       1.1       gwr 			*p = '\0';
    550       1.1       gwr 		}
    551       1.1       gwr 	}
    552      1.63       chs 	printf("rebooting...\n");
    553       1.3       gwr 	sunmon_reboot(bootstr);
    554       1.1       gwr 	for (;;) ;
    555       1.1       gwr 	/*NOTREACHED*/
    556       1.1       gwr }
    557       1.1       gwr 
    558       1.1       gwr /*
    559       1.1       gwr  * These variables are needed by /sbin/savecore
    560       1.1       gwr  */
    561  1.71.2.2  jdolecek u_int32_t dumpmag = 0x8fca0101;	/* magic number */
    562       1.1       gwr int 	dumpsize = 0;		/* pages */
    563       1.1       gwr long	dumplo = 0; 		/* blocks */
    564       1.1       gwr 
    565      1.71   tsutsui #define DUMP_EXTRA	1	/* CPU-dependent extra pages */
    566      1.71   tsutsui 
    567       1.1       gwr /*
    568      1.11       gwr  * This is called by main to set dumplo, dumpsize.
    569      1.54     ragge  * Dumps always skip the first NBPG of disk space
    570       1.1       gwr  * in case there might be a disk label stored there.
    571       1.1       gwr  * If there is extra space, put dump at the end to
    572       1.1       gwr  * reduce the chance that swapping trashes it.
    573       1.1       gwr  */
    574       1.1       gwr void
    575      1.11       gwr cpu_dumpconf()
    576       1.1       gwr {
    577      1.71   tsutsui 	int devblks;	/* size of dump device in blocks */
    578      1.71   tsutsui 	int dumpblks;	/* size of dump image in blocks */
    579       1.1       gwr 	int maj;
    580       1.1       gwr 	int (*getsize)__P((dev_t));
    581       1.1       gwr 
    582       1.1       gwr 	if (dumpdev == NODEV)
    583       1.1       gwr 		return;
    584       1.1       gwr 
    585       1.1       gwr 	maj = major(dumpdev);
    586       1.1       gwr 	if (maj < 0 || maj >= nblkdev)
    587       1.1       gwr 		panic("dumpconf: bad dumpdev=0x%x", dumpdev);
    588       1.1       gwr 	getsize = bdevsw[maj].d_psize;
    589       1.1       gwr 	if (getsize == NULL)
    590       1.1       gwr 		return;
    591      1.71   tsutsui 	devblks = (*getsize)(dumpdev);
    592      1.71   tsutsui 	if (devblks <= ctod(1))
    593       1.1       gwr 		return;
    594      1.71   tsutsui 	devblks &= ~(ctod(1) - 1);
    595      1.71   tsutsui 
    596      1.71   tsutsui 	/*
    597      1.71   tsutsui 	 * Note: savecore expects dumpsize to be the
    598      1.71   tsutsui 	 * number of pages AFTER the dump header.
    599      1.71   tsutsui 	 */
    600      1.71   tsutsui 	dumpsize = physmem; 	/* pages */
    601       1.1       gwr 
    602       1.1       gwr 	/* Position dump image near end of space, page aligned. */
    603      1.71   tsutsui 	dumpblks = ctod(physmem + DUMP_EXTRA);
    604      1.71   tsutsui 	dumplo = devblks - dumpblks;
    605       1.1       gwr 
    606       1.1       gwr 	/* If it does not fit, truncate it by moving dumplo. */
    607       1.1       gwr 	/* Note: Must force signed comparison. */
    608       1.1       gwr 	if (dumplo < ((long)ctod(1))) {
    609       1.1       gwr 		dumplo = ctod(1);
    610      1.71   tsutsui 		dumpsize = dtoc(devblks - dumplo) - DUMP_EXTRA;
    611       1.1       gwr 	}
    612       1.1       gwr }
    613       1.1       gwr 
    614      1.13       gwr /* Note: gdb looks for "dumppcb" in a kernel crash dump. */
    615       1.1       gwr struct pcb dumppcb;
    616       1.1       gwr 
    617       1.1       gwr /*
    618       1.1       gwr  * Write a crash dump.  The format while in swap is:
    619       1.1       gwr  *   kcore_seg_t cpu_hdr;
    620       1.1       gwr  *   cpu_kcore_hdr_t cpu_data;
    621       1.1       gwr  *   padding (NBPG-sizeof(kcore_seg_t))
    622       1.1       gwr  *   pagemap (2*NBPG)
    623       1.1       gwr  *   physical memory...
    624       1.1       gwr  */
    625       1.1       gwr void
    626       1.1       gwr dumpsys()
    627       1.1       gwr {
    628       1.1       gwr 	struct bdevsw *dsw;
    629      1.66       chs 	kcore_seg_t *kseg_p;
    630      1.10       gwr 	cpu_kcore_hdr_t *chdr_p;
    631      1.14   thorpej 	struct sun3x_kcore_hdr *sh;
    632      1.14   thorpej 	phys_ram_seg_t *crs_p;
    633       1.1       gwr 	char *vaddr;
    634  1.71.2.1   thorpej 	paddr_t paddr;
    635      1.10       gwr 	int psize, todo, seg, segsz;
    636       1.1       gwr 	daddr_t blkno;
    637       1.1       gwr 	int error = 0;
    638       1.1       gwr 
    639       1.1       gwr 	if (dumpdev == NODEV)
    640       1.1       gwr 		return;
    641       1.1       gwr 
    642       1.1       gwr 	/*
    643       1.1       gwr 	 * For dumps during autoconfiguration,
    644       1.1       gwr 	 * if dump device has already configured...
    645       1.1       gwr 	 */
    646       1.1       gwr 	if (dumpsize == 0)
    647      1.11       gwr 		cpu_dumpconf();
    648      1.28   mycroft 	if (dumplo <= 0) {
    649      1.28   mycroft 		printf("\ndump to dev %u,%u not possible\n", major(dumpdev),
    650      1.28   mycroft 		    minor(dumpdev));
    651       1.1       gwr 		return;
    652      1.28   mycroft 	}
    653       1.1       gwr 	savectx(&dumppcb);
    654       1.1       gwr 
    655       1.1       gwr 	dsw = &bdevsw[major(dumpdev)];
    656       1.1       gwr 	psize = (*(dsw->d_psize))(dumpdev);
    657       1.1       gwr 	if (psize == -1) {
    658       1.1       gwr 		printf("dump area unavailable\n");
    659       1.1       gwr 		return;
    660       1.1       gwr 	}
    661       1.1       gwr 
    662      1.28   mycroft 	printf("\ndumping to dev %u,%u offset %ld\n", major(dumpdev),
    663      1.28   mycroft 	    minor(dumpdev), dumplo);
    664       1.1       gwr 
    665       1.1       gwr 	/*
    666      1.71   tsutsui 	 * Prepare the dump header
    667       1.1       gwr 	 */
    668      1.71   tsutsui 	blkno = dumplo;
    669      1.71   tsutsui 	todo = dumpsize;	/* pages */
    670      1.71   tsutsui 	vaddr = (char *)dumppage;
    671  1.71.2.1   thorpej 	memset(vaddr, 0, NBPG);
    672      1.25       gwr 
    673      1.25       gwr 	/* Set pointers to all three parts. */
    674      1.71   tsutsui 	kseg_p = (kcore_seg_t *)vaddr;
    675      1.66       chs 	chdr_p = (cpu_kcore_hdr_t *)(kseg_p + 1);
    676      1.14   thorpej 	sh = &chdr_p->un._sun3x;
    677      1.25       gwr 
    678      1.25       gwr 	/* Fill in kcore_seg_t part. */
    679      1.10       gwr 	CORE_SETMAGIC(*kseg_p, KCORE_MAGIC, MID_MACHINE, CORE_CPU);
    680      1.71   tsutsui 	kseg_p->c_size = (ctob(DUMP_EXTRA) - sizeof(*kseg_p));
    681      1.25       gwr 
    682      1.25       gwr 	/* Fill in cpu_kcore_hdr_t part. */
    683      1.46       gwr 	strncpy(chdr_p->name, kernel_arch, sizeof(chdr_p->name));
    684      1.25       gwr 	chdr_p->page_size = NBPG;
    685      1.25       gwr 	chdr_p->kernbase = KERNBASE;
    686      1.25       gwr 
    687      1.25       gwr 	/* Fill in the sun3x_kcore_hdr part. */
    688      1.25       gwr 	pmap_kcore_hdr(sh);
    689      1.10       gwr 
    690      1.71   tsutsui 	/* Write out the dump header. */
    691      1.71   tsutsui 	error = (*dsw->d_dump)(dumpdev, blkno, vaddr, NBPG);
    692      1.71   tsutsui 	if (error)
    693      1.71   tsutsui 		goto fail;
    694      1.71   tsutsui 	blkno += btodb(NBPG);
    695      1.71   tsutsui 
    696      1.10       gwr 	/*
    697      1.10       gwr 	 * Now dump physical memory.  Note that physical memory
    698      1.10       gwr 	 * might NOT be congiguous, so do it by segments.
    699      1.10       gwr 	 */
    700      1.10       gwr 
    701      1.66       chs 	vaddr = (char *)vmmap;	/* Borrow /dev/mem VA */
    702       1.1       gwr 
    703      1.14   thorpej 	for (seg = 0; seg < SUN3X_NPHYS_RAM_SEGS; seg++) {
    704      1.14   thorpej 		crs_p = &sh->ram_segs[seg];
    705      1.10       gwr 		paddr = crs_p->start;
    706      1.10       gwr 		segsz = crs_p->size;
    707       1.1       gwr 
    708      1.10       gwr 		while (todo && (segsz > 0)) {
    709       1.1       gwr 
    710      1.10       gwr 			/* Print pages left after every 16. */
    711      1.10       gwr 			if ((todo & 0xf) == 0)
    712      1.10       gwr 				printf("\r%4d", todo);
    713      1.10       gwr 
    714      1.10       gwr 			/* Make a temporary mapping for the page. */
    715  1.71.2.1   thorpej 			pmap_kenter_pa(vmmap, paddr | PMAP_NC, VM_PROT_READ);
    716  1.71.2.1   thorpej 			pmap_update(pmap_kernel());
    717      1.10       gwr 			error = (*dsw->d_dump)(dumpdev, blkno, vaddr, NBPG);
    718  1.71.2.1   thorpej 			pmap_kremove(vmmap, NBPG);
    719  1.71.2.1   thorpej 			pmap_update(pmap_kernel());
    720      1.10       gwr 			if (error)
    721      1.10       gwr 				goto fail;
    722      1.10       gwr 			paddr += NBPG;
    723      1.10       gwr 			segsz -= NBPG;
    724      1.10       gwr 			blkno += btodb(NBPG);
    725      1.10       gwr 			todo--;
    726      1.10       gwr 		}
    727      1.10       gwr 	}
    728       1.1       gwr 	printf("\rdump succeeded\n");
    729       1.1       gwr 	return;
    730       1.1       gwr fail:
    731       1.1       gwr 	printf(" dump error=%d\n", error);
    732       1.1       gwr }
    733       1.1       gwr 
    734       1.1       gwr static void
    735       1.1       gwr initcpu()
    736       1.1       gwr {
    737       1.1       gwr 	/* XXX: Enable RAM parity/ECC checking? */
    738       1.1       gwr 	/* XXX: parityenable(); */
    739       1.1       gwr 
    740       1.1       gwr #ifdef	HAVECACHE
    741       1.1       gwr 	cache_enable();
    742       1.1       gwr #endif
    743       1.1       gwr }
    744       1.1       gwr 
    745       1.8       gwr /* straptrap() in trap.c */
    746       1.1       gwr 
    747       1.1       gwr /* from hp300: badaddr() */
    748      1.15       gwr /* peek_byte(), peek_word() moved to bus_subr.c */
    749       1.1       gwr 
    750       1.1       gwr /* XXX: parityenable() ? */
    751       1.7       gwr /* regdump() moved to regdump.c */
    752       1.1       gwr 
    753       1.1       gwr /*
    754       1.1       gwr  * cpu_exec_aout_makecmds():
    755       1.1       gwr  *	cpu-dependent a.out format hook for execve().
    756       1.1       gwr  *
    757       1.1       gwr  * Determine if the given exec package refers to something which we
    758       1.1       gwr  * understand and, if so, set up the vmcmds for it.
    759       1.1       gwr  */
    760       1.1       gwr int
    761       1.1       gwr cpu_exec_aout_makecmds(p, epp)
    762       1.1       gwr 	struct proc *p;
    763       1.1       gwr 	struct exec_package *epp;
    764       1.1       gwr {
    765      1.27        tv 	return ENOEXEC;
    766       1.1       gwr }
    767