Home | History | Annotate | Line # | Download | only in sun3x
machdep.c revision 1.90
      1  1.90     lukem /*	$NetBSD: machdep.c,v 1.90 2003/07/15 03:36:20 lukem Exp $	*/
      2   1.1       gwr 
      3   1.1       gwr /*
      4   1.1       gwr  * Copyright (c) 1988 University of Utah.
      5   1.1       gwr  * Copyright (c) 1982, 1986, 1990, 1993
      6   1.1       gwr  *	The Regents of the University of California.  All rights reserved.
      7   1.1       gwr  *
      8   1.1       gwr  * This code is derived from software contributed to Berkeley by
      9   1.1       gwr  * the Systems Programming Group of the University of Utah Computer
     10   1.1       gwr  * Science Department.
     11   1.1       gwr  *
     12   1.1       gwr  * Redistribution and use in source and binary forms, with or without
     13   1.1       gwr  * modification, are permitted provided that the following conditions
     14   1.1       gwr  * are met:
     15   1.1       gwr  * 1. Redistributions of source code must retain the above copyright
     16   1.1       gwr  *    notice, this list of conditions and the following disclaimer.
     17   1.1       gwr  * 2. Redistributions in binary form must reproduce the above copyright
     18   1.1       gwr  *    notice, this list of conditions and the following disclaimer in the
     19   1.1       gwr  *    documentation and/or other materials provided with the distribution.
     20   1.1       gwr  * 3. All advertising materials mentioning features or use of this software
     21   1.1       gwr  *    must display the following acknowledgement:
     22   1.1       gwr  *	This product includes software developed by the University of
     23   1.1       gwr  *	California, Berkeley and its contributors.
     24   1.1       gwr  * 4. Neither the name of the University nor the names of its contributors
     25   1.1       gwr  *    may be used to endorse or promote products derived from this software
     26   1.1       gwr  *    without specific prior written permission.
     27   1.1       gwr  *
     28   1.1       gwr  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     29   1.1       gwr  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     30   1.1       gwr  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     31   1.1       gwr  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     32   1.1       gwr  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     33   1.1       gwr  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     34   1.1       gwr  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     35   1.1       gwr  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     36   1.1       gwr  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     37   1.1       gwr  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     38   1.1       gwr  * SUCH DAMAGE.
     39   1.1       gwr  *
     40   1.1       gwr  *	from: Utah Hdr: machdep.c 1.74 92/12/20
     41   1.1       gwr  *	from: @(#)machdep.c	8.10 (Berkeley) 4/20/94
     42   1.1       gwr  */
     43  1.90     lukem 
     44  1.90     lukem #include <sys/cdefs.h>
     45  1.90     lukem __KERNEL_RCSID(0, "$NetBSD: machdep.c,v 1.90 2003/07/15 03:36:20 lukem Exp $");
     46   1.1       gwr 
     47  1.35  jonathan #include "opt_ddb.h"
     48  1.69     lukem #include "opt_kgdb.h"
     49  1.34       gwr 
     50   1.1       gwr #include <sys/param.h>
     51   1.1       gwr #include <sys/systm.h>
     52   1.1       gwr #include <sys/kernel.h>
     53   1.1       gwr #include <sys/proc.h>
     54   1.1       gwr #include <sys/buf.h>
     55   1.1       gwr #include <sys/reboot.h>
     56   1.1       gwr #include <sys/conf.h>
     57   1.1       gwr #include <sys/file.h>
     58  1.37    kleink #include <sys/device.h>
     59   1.1       gwr #include <sys/malloc.h>
     60   1.1       gwr #include <sys/mbuf.h>
     61   1.1       gwr #include <sys/msgbuf.h>
     62   1.1       gwr #include <sys/ioctl.h>
     63   1.1       gwr #include <sys/tty.h>
     64   1.1       gwr #include <sys/mount.h>
     65   1.1       gwr #include <sys/user.h>
     66   1.1       gwr #include <sys/exec.h>
     67   1.1       gwr #include <sys/core.h>
     68   1.1       gwr #include <sys/kcore.h>
     69   1.1       gwr #include <sys/vnode.h>
     70  1.85   thorpej #include <sys/sa.h>
     71   1.1       gwr #include <sys/syscallargs.h>
     72  1.87     ragge #include <sys/ksyms.h>
     73   1.8       gwr #ifdef	KGDB
     74   1.8       gwr #include <sys/kgdb.h>
     75   1.8       gwr #endif
     76  1.26   hannken 
     77  1.42       mrg #include <uvm/uvm_extern.h>
     78  1.34       gwr 
     79  1.26   hannken #include <sys/sysctl.h>
     80   1.1       gwr 
     81   1.1       gwr #include <dev/cons.h>
     82   1.1       gwr 
     83   1.1       gwr #include <machine/cpu.h>
     84  1.29       gwr #include <machine/dvma.h>
     85  1.29       gwr #include <machine/idprom.h>
     86  1.29       gwr #include <machine/kcore.h>
     87   1.1       gwr #include <machine/reg.h>
     88   1.1       gwr #include <machine/psl.h>
     89   1.1       gwr #include <machine/pte.h>
     90  1.29       gwr 
     91  1.41    kleink #if defined(DDB)
     92   1.1       gwr #include <machine/db_machdep.h>
     93  1.33       gwr #include <ddb/db_sym.h>
     94  1.32        tv #include <ddb/db_extern.h>
     95  1.41    kleink #endif
     96   1.1       gwr 
     97  1.29       gwr #include <sun3/sun3/machdep.h>
     98   1.1       gwr 
     99  1.87     ragge #include "ksyms.h"
    100  1.87     ragge 
    101   1.1       gwr /* Defined in locore.s */
    102   1.1       gwr extern char kernel_text[];
    103   1.1       gwr /* Defined by the linker */
    104   1.1       gwr extern char etext[];
    105  1.56   thorpej 
    106  1.56   thorpej /* Our exported CPU info; we can have only one. */
    107  1.56   thorpej struct cpu_info cpu_info_store;
    108   1.1       gwr 
    109  1.70       chs struct vm_map *exec_map = NULL;
    110  1.70       chs struct vm_map *mb_map = NULL;
    111  1.70       chs struct vm_map *phys_map = NULL;
    112  1.34       gwr 
    113   1.1       gwr int	physmem;
    114   1.9       gwr int	fputype;
    115  1.22       leo caddr_t	msgbufaddr;
    116   1.1       gwr 
    117  1.29       gwr /* Virtual page frame for /dev/mem (see mem.c) */
    118  1.73   tsutsui vaddr_t vmmap;
    119  1.79     lukem 
    120  1.79     lukem union sun3sir sun3sir;
    121   1.1       gwr 
    122   1.1       gwr /*
    123   1.1       gwr  * safepri is a safe priority for sleep to set for a spin-wait
    124   1.1       gwr  * during autoconfiguration or after a panic.
    125   1.1       gwr  */
    126   1.1       gwr int	safepri = PSL_LOWIPL;
    127   1.1       gwr 
    128  1.29       gwr u_char cpu_machine_id = 0;
    129  1.15       gwr char *cpu_string = NULL;
    130  1.15       gwr int cpu_has_vme = 0;
    131  1.15       gwr int has_iocache = 0;
    132  1.15       gwr 
    133  1.66       chs vaddr_t dumppage;
    134  1.66       chs 
    135   1.1       gwr static void identifycpu __P((void));
    136   1.1       gwr static void initcpu __P((void));
    137   1.1       gwr 
    138   1.1       gwr /*
    139   1.1       gwr  * Console initialization: called early on from main,
    140  1.15       gwr  * before vm init or cpu_startup.  This system is able
    141  1.29       gwr  * to use the console for output immediately (via PROM)
    142  1.29       gwr  * but can not use it for input until after this point.
    143   1.1       gwr  */
    144   1.8       gwr void
    145   1.8       gwr consinit()
    146   1.1       gwr {
    147  1.29       gwr 
    148  1.29       gwr 	/*
    149  1.29       gwr 	 * Switch from the PROM console (output only)
    150  1.29       gwr 	 * to our own console driver.
    151  1.29       gwr 	 */
    152  1.29       gwr 	cninit();
    153   1.1       gwr 
    154  1.87     ragge #if NKSYMS || defined(DDB) || defined(LKM)
    155  1.32        tv 	{
    156  1.63       chs 		extern int nsym;
    157  1.63       chs 		extern char *ssym, *esym;
    158  1.32        tv 
    159  1.87     ragge 		ksyms_init(nsym, ssym, esym);
    160  1.32        tv 	}
    161  1.72    simonb #endif	/* DDB */
    162  1.31       gwr 
    163  1.31       gwr 	/*
    164  1.31       gwr 	 * Now that the console can do input as well as
    165  1.31       gwr 	 * output, consider stopping for a debugger.
    166  1.31       gwr 	 */
    167  1.31       gwr 	if (boothowto & RB_KDB) {
    168  1.31       gwr #ifdef KGDB
    169  1.31       gwr 		/* XXX - Ask on console for kgdb_dev? */
    170  1.31       gwr 		/* Note: this will just return if kgdb_dev==NODEV */
    171  1.31       gwr 		kgdb_connect(1);
    172  1.31       gwr #else	/* KGDB */
    173  1.31       gwr 		/* Either DDB or no debugger (just PROM). */
    174   1.1       gwr 		Debugger();
    175  1.31       gwr #endif	/* KGDB */
    176  1.31       gwr 	}
    177   1.1       gwr }
    178   1.1       gwr 
    179   1.1       gwr /*
    180   1.1       gwr  * cpu_startup: allocate memory for variable-sized tables,
    181   1.1       gwr  * initialize cpu, and do autoconfiguration.
    182   1.1       gwr  *
    183   1.1       gwr  * This is called early in init_main.c:main(), after the
    184   1.1       gwr  * kernel memory allocator is ready for use, but before
    185   1.1       gwr  * the creation of processes 1,2, and mountroot, etc.
    186   1.1       gwr  */
    187   1.1       gwr void
    188   1.1       gwr cpu_startup()
    189   1.1       gwr {
    190   1.1       gwr 	caddr_t v;
    191  1.73   tsutsui 	vsize_t size;
    192  1.80   thorpej 	int sz, i, base, residual;
    193  1.73   tsutsui 	vaddr_t minaddr, maxaddr;
    194  1.50     lukem 	char pbuf[9];
    195   1.1       gwr 
    196  1.85   thorpej 	if (fputype != FPU_NONE)
    197  1.85   thorpej 		m68k_make_fpu_idle_frame();
    198  1.85   thorpej 
    199   1.1       gwr 	/*
    200   1.1       gwr 	 * Initialize message buffer (for kernel printf).
    201   1.1       gwr 	 * This is put in physical page zero so it will
    202   1.1       gwr 	 * always be in the same place after a reboot.
    203   1.1       gwr 	 * Its mapping was prepared in pmap_bootstrap().
    204   1.1       gwr 	 * Also, offset some to avoid PROM scribbles.
    205   1.1       gwr 	 */
    206   1.1       gwr 	v = (caddr_t) KERNBASE;
    207  1.23       gwr 	msgbufaddr = (caddr_t)(v + MSGBUFOFF);
    208  1.23       gwr 	initmsgbuf(msgbufaddr, MSGBUFSIZE);
    209   1.1       gwr 
    210   1.1       gwr 	/*
    211   1.1       gwr 	 * Good {morning,afternoon,evening,night}.
    212   1.1       gwr 	 */
    213   1.1       gwr 	printf(version);
    214   1.1       gwr 	identifycpu();
    215   1.1       gwr 	initfpu();	/* also prints FPU type */
    216   1.1       gwr 
    217  1.50     lukem 	format_bytes(pbuf, sizeof(pbuf), ctob(physmem));
    218  1.50     lukem 	printf("total memory = %s\n", pbuf);
    219   1.1       gwr 
    220   1.1       gwr 	/*
    221  1.66       chs 	 * Get scratch page for dumpsys().
    222  1.66       chs 	 */
    223  1.86   thorpej 	if ((dumppage = uvm_km_alloc(kernel_map, PAGE_SIZE)) == 0)
    224  1.66       chs 		panic("startup: alloc dumppage");
    225  1.66       chs 
    226  1.66       chs 	/*
    227   1.1       gwr 	 * Find out how much space we need, allocate it,
    228   1.1       gwr 	 * and then give everything true virtual addresses.
    229   1.1       gwr 	 */
    230  1.80   thorpej 	sz = (u_int)allocsys(NULL, NULL);
    231  1.42       mrg 	if ((v = (caddr_t)uvm_km_alloc(kernel_map, round_page(sz))) == 0)
    232   1.1       gwr 		panic("startup: no room for tables");
    233  1.50     lukem 	if (allocsys(v, NULL) - v != sz)
    234   1.1       gwr 		panic("startup: table size inconsistency");
    235   1.1       gwr 
    236   1.1       gwr 	/*
    237   1.1       gwr 	 * Now allocate buffers proper.  They are different than the above
    238   1.1       gwr 	 * in that they usually occupy more virtual memory than physical.
    239   1.1       gwr 	 */
    240   1.1       gwr 	size = MAXBSIZE * nbuf;
    241  1.73   tsutsui 	if (uvm_map(kernel_map, (vaddr_t *) &buffers, round_page(size),
    242  1.60   thorpej 		    NULL, UVM_UNKNOWN_OFFSET, 0,
    243  1.34       gwr 		    UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE, UVM_INH_NONE,
    244  1.64       chs 				UVM_ADV_NORMAL, 0)) != 0)
    245  1.34       gwr 		panic("startup: cannot allocate VM for buffers");
    246  1.73   tsutsui 	minaddr = (vaddr_t)buffers;
    247   1.1       gwr 	if ((bufpages / nbuf) >= btoc(MAXBSIZE)) {
    248   1.1       gwr 		/* don't want to alloc more physical mem than needed */
    249   1.1       gwr 		bufpages = btoc(MAXBSIZE) * nbuf;
    250   1.1       gwr 	}
    251   1.1       gwr 	base = bufpages / nbuf;
    252   1.1       gwr 	residual = bufpages % nbuf;
    253   1.1       gwr 	for (i = 0; i < nbuf; i++) {
    254  1.73   tsutsui 		vsize_t curbufsize;
    255  1.73   tsutsui 		vaddr_t curbuf;
    256  1.34       gwr 		struct vm_page *pg;
    257  1.34       gwr 
    258  1.34       gwr 		/*
    259  1.34       gwr 		 * Each buffer has MAXBSIZE bytes of VM space allocated.  Of
    260  1.34       gwr 		 * that MAXBSIZE space, we allocate and map (base+1) pages
    261  1.34       gwr 		 * for the first "residual" buffers, and then we allocate
    262  1.34       gwr 		 * "base" pages for the rest.
    263  1.34       gwr 		 */
    264  1.73   tsutsui 		curbuf = (vaddr_t) buffers + (i * MAXBSIZE);
    265  1.86   thorpej 		curbufsize = PAGE_SIZE * ((i < residual) ? (base+1) : base);
    266  1.34       gwr 
    267  1.34       gwr 		while (curbufsize) {
    268  1.47       chs 			pg = uvm_pagealloc(NULL, 0, NULL, 0);
    269  1.34       gwr 			if (pg == NULL)
    270  1.34       gwr 				panic("cpu_startup: not enough memory for "
    271  1.34       gwr 				    "buffer cache");
    272  1.52       chs 			pmap_kenter_pa(curbuf, VM_PAGE_TO_PHYS(pg),
    273  1.52       chs 				       VM_PROT_READ|VM_PROT_WRITE);
    274  1.34       gwr 			curbuf += PAGE_SIZE;
    275  1.34       gwr 			curbufsize -= PAGE_SIZE;
    276  1.34       gwr 		}
    277   1.1       gwr 	}
    278  1.75     chris 	pmap_update(pmap_kernel());
    279   1.1       gwr 
    280   1.1       gwr 	/*
    281   1.1       gwr 	 * Allocate a submap for exec arguments.  This map effectively
    282   1.1       gwr 	 * limits the number of processes exec'ing at any time.
    283   1.1       gwr 	 */
    284  1.34       gwr 	exec_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
    285  1.51   thorpej 				   16*NCARGS, VM_MAP_PAGEABLE, FALSE, NULL);
    286   1.1       gwr 
    287   1.1       gwr 	/*
    288  1.84       chs 	 * Allocate a submap for physio
    289   1.1       gwr 	 */
    290  1.84       chs 	phys_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
    291  1.84       chs 				   VM_PHYS_SIZE, 0, FALSE, NULL);
    292   1.1       gwr 
    293   1.1       gwr 	/*
    294  1.12   thorpej 	 * Finally, allocate mbuf cluster submap.
    295   1.1       gwr 	 */
    296  1.39   thorpej 	mb_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
    297  1.51   thorpej 				 nmbclusters * mclbytes, VM_MAP_INTRSAFE,
    298  1.51   thorpej 				 FALSE, NULL);
    299   1.1       gwr 
    300  1.50     lukem 	format_bytes(pbuf, sizeof(pbuf), ptoa(uvmexp.free));
    301  1.50     lukem 	printf("avail memory = %s\n", pbuf);
    302  1.86   thorpej 	format_bytes(pbuf, sizeof(pbuf), bufpages * PAGE_SIZE);
    303  1.80   thorpej 	printf("using %u buffers containing %s of memory\n", nbuf, pbuf);
    304   1.1       gwr 
    305   1.1       gwr 	/*
    306   1.1       gwr 	 * Allocate a virtual page (for use by /dev/mem)
    307   1.1       gwr 	 * This page is handed to pmap_enter() therefore
    308   1.1       gwr 	 * it has to be in the normal kernel VA range.
    309   1.1       gwr 	 */
    310  1.86   thorpej 	vmmap = uvm_km_valloc_wait(kernel_map, PAGE_SIZE);
    311   1.1       gwr 
    312   1.1       gwr 	/*
    313   1.1       gwr 	 * Create the DVMA maps.
    314   1.1       gwr 	 */
    315   1.1       gwr 	dvma_init();
    316   1.1       gwr 
    317   1.1       gwr 	/*
    318   1.1       gwr 	 * Set up CPU-specific registers, cache, etc.
    319   1.1       gwr 	 */
    320   1.1       gwr 	initcpu();
    321   1.1       gwr 
    322   1.1       gwr 	/*
    323   1.1       gwr 	 * Set up buffers, so they can be used to read disk labels.
    324   1.1       gwr 	 */
    325   1.1       gwr 	bufinit();
    326   1.1       gwr }
    327   1.1       gwr 
    328   1.1       gwr /*
    329   1.1       gwr  * Set registers on exec.
    330   1.1       gwr  */
    331   1.1       gwr void
    332  1.85   thorpej setregs(l, pack, stack)
    333  1.85   thorpej 	struct lwp *l;
    334   1.1       gwr 	struct exec_package *pack;
    335   1.1       gwr 	u_long stack;
    336   1.1       gwr {
    337  1.85   thorpej 	struct trapframe *tf = (struct trapframe *)l->l_md.md_regs;
    338   1.1       gwr 
    339  1.21   mycroft 	tf->tf_sr = PSL_USERSET;
    340   1.5       gwr 	tf->tf_pc = pack->ep_entry & ~1;
    341  1.20   mycroft 	tf->tf_regs[D0] = 0;
    342  1.20   mycroft 	tf->tf_regs[D1] = 0;
    343  1.20   mycroft 	tf->tf_regs[D2] = 0;
    344  1.20   mycroft 	tf->tf_regs[D3] = 0;
    345  1.20   mycroft 	tf->tf_regs[D4] = 0;
    346  1.20   mycroft 	tf->tf_regs[D5] = 0;
    347  1.20   mycroft 	tf->tf_regs[D6] = 0;
    348  1.20   mycroft 	tf->tf_regs[D7] = 0;
    349  1.20   mycroft 	tf->tf_regs[A0] = 0;
    350  1.20   mycroft 	tf->tf_regs[A1] = 0;
    351  1.85   thorpej 	tf->tf_regs[A2] = (int)l->l_proc->p_psstr;
    352  1.20   mycroft 	tf->tf_regs[A3] = 0;
    353  1.20   mycroft 	tf->tf_regs[A4] = 0;
    354  1.20   mycroft 	tf->tf_regs[A5] = 0;
    355  1.20   mycroft 	tf->tf_regs[A6] = 0;
    356   1.5       gwr 	tf->tf_regs[SP] = stack;
    357   1.1       gwr 
    358   1.1       gwr 	/* restore a null state frame */
    359  1.85   thorpej 	l->l_addr->u_pcb.pcb_fpregs.fpf_null = 0;
    360  1.19   mycroft 	if (fputype)
    361  1.85   thorpej 		m68881_restore(&l->l_addr->u_pcb.pcb_fpregs);
    362  1.19   mycroft 
    363  1.85   thorpej 	l->l_md.md_flags = 0;
    364   1.1       gwr }
    365   1.1       gwr 
    366   1.1       gwr /*
    367   1.1       gwr  * Info for CTL_HW
    368   1.1       gwr  */
    369  1.46       gwr char	machine[16] = MACHINE;		/* from <machine/param.h> */
    370  1.46       gwr char	kernel_arch[16] = "sun3x";	/* XXX needs a sysctl node */
    371   1.1       gwr char	cpu_model[120];
    372  1.15       gwr 
    373  1.15       gwr /*
    374  1.15       gwr  * XXX - Should empirically estimate the divisor...
    375  1.15       gwr  * Note that the value of delay_divisor is roughly
    376  1.15       gwr  * 2048 / cpuclock	(where cpuclock is in MHz).
    377  1.15       gwr  */
    378  1.16       gwr int delay_divisor = 62;		/* assume the fastest (33 MHz) */
    379   1.1       gwr 
    380   1.1       gwr void
    381   1.1       gwr identifycpu()
    382   1.1       gwr {
    383  1.29       gwr 	u_char machtype;
    384   1.1       gwr 
    385  1.15       gwr 	machtype = identity_prom.idp_machtype;
    386  1.29       gwr 	if ((machtype & IDM_ARCH_MASK) != IDM_ARCH_SUN3X) {
    387  1.29       gwr 		printf("Bad IDPROM arch!\n");
    388  1.15       gwr 		sunmon_abort();
    389  1.15       gwr 	}
    390  1.15       gwr 
    391  1.29       gwr 	cpu_machine_id = machtype;
    392  1.15       gwr 	switch (cpu_machine_id) {
    393  1.15       gwr 
    394  1.15       gwr 	case SUN3X_MACH_80:
    395  1.15       gwr 		cpu_string = "80";  	/* Hydra */
    396  1.16       gwr 		delay_divisor = 102;	/* 20 MHz */
    397  1.15       gwr 		cpu_has_vme = FALSE;
    398  1.15       gwr 		break;
    399  1.15       gwr 
    400  1.15       gwr 	case SUN3X_MACH_470:
    401  1.15       gwr 		cpu_string = "470"; 	/* Pegasus */
    402  1.15       gwr 		delay_divisor = 62; 	/* 33 MHz */
    403  1.15       gwr 		cpu_has_vme = TRUE;
    404  1.15       gwr 		break;
    405  1.15       gwr 
    406  1.15       gwr 	default:
    407  1.15       gwr 		printf("unknown sun3x model\n");
    408  1.15       gwr 		sunmon_abort();
    409  1.15       gwr 	}
    410  1.15       gwr 
    411  1.15       gwr 	/* Other stuff? (VAC, mc6888x version, etc.) */
    412  1.46       gwr 	/* Note: miniroot cares about the kernel_arch part. */
    413  1.46       gwr 	sprintf(cpu_model, "%s %s", kernel_arch, cpu_string);
    414   1.1       gwr 
    415  1.29       gwr 	printf("Model: %s\n", cpu_model);
    416   1.1       gwr }
    417   1.1       gwr 
    418   1.1       gwr /*
    419   1.1       gwr  * machine dependent system variables.
    420   1.1       gwr  */
    421   1.1       gwr int
    422   1.1       gwr cpu_sysctl(name, namelen, oldp, oldlenp, newp, newlen, p)
    423   1.1       gwr 	int *name;
    424   1.1       gwr 	u_int namelen;
    425   1.1       gwr 	void *oldp;
    426   1.1       gwr 	size_t *oldlenp;
    427   1.1       gwr 	void *newp;
    428   1.1       gwr 	size_t newlen;
    429   1.1       gwr 	struct proc *p;
    430   1.1       gwr {
    431   1.1       gwr 	int error;
    432   1.1       gwr 	dev_t consdev;
    433   1.1       gwr 
    434   1.1       gwr 	/* all sysctl names at this level are terminal */
    435   1.1       gwr 	if (namelen != 1)
    436   1.1       gwr 		return (ENOTDIR);		/* overloaded */
    437   1.1       gwr 
    438   1.1       gwr 	switch (name[0]) {
    439   1.1       gwr 	case CPU_CONSDEV:
    440   1.1       gwr 		if (cn_tab != NULL)
    441   1.1       gwr 			consdev = cn_tab->cn_dev;
    442   1.1       gwr 		else
    443   1.1       gwr 			consdev = NODEV;
    444   1.1       gwr 		error = sysctl_rdstruct(oldp, oldlenp, newp,
    445   1.1       gwr 		    &consdev, sizeof consdev);
    446   1.1       gwr 		break;
    447   1.1       gwr 
    448   1.1       gwr #if 0	/* XXX - Not yet... */
    449   1.1       gwr 	case CPU_ROOT_DEVICE:
    450   1.1       gwr 		error = sysctl_rdstring(oldp, oldlenp, newp, root_device);
    451   1.1       gwr 		break;
    452   1.1       gwr 
    453   1.1       gwr 	case CPU_BOOTED_KERNEL:
    454   1.1       gwr 		error = sysctl_rdstring(oldp, oldlenp, newp, booted_kernel);
    455   1.1       gwr 		break;
    456   1.1       gwr #endif
    457   1.1       gwr 
    458   1.1       gwr 	default:
    459   1.1       gwr 		error = EOPNOTSUPP;
    460   1.1       gwr 	}
    461   1.1       gwr 	return (error);
    462   1.1       gwr }
    463   1.1       gwr 
    464   1.7       gwr /* See: sig_machdep.c */
    465   1.1       gwr 
    466   1.1       gwr /*
    467   1.1       gwr  * Do a sync in preparation for a reboot.
    468   1.1       gwr  * XXX - This could probably be common code.
    469   1.1       gwr  * XXX - And now, most of it is in vfs_shutdown()
    470   1.1       gwr  * XXX - Put waittime checks in there too?
    471   1.1       gwr  */
    472   1.1       gwr int waittime = -1;	/* XXX - Who else looks at this? -gwr */
    473   1.1       gwr static void
    474   1.1       gwr reboot_sync __P((void))
    475   1.1       gwr {
    476   1.1       gwr 
    477   1.1       gwr 	/* Check waittime here to localize its use to this function. */
    478   1.1       gwr 	if (waittime >= 0)
    479   1.1       gwr 		return;
    480   1.1       gwr 	waittime = 0;
    481   1.1       gwr 	vfs_shutdown();
    482   1.1       gwr }
    483   1.1       gwr 
    484   1.1       gwr /*
    485   1.1       gwr  * Common part of the BSD and SunOS reboot system calls.
    486   1.1       gwr  */
    487   1.1       gwr __dead void
    488  1.11       gwr cpu_reboot(howto, user_boot_string)
    489   1.1       gwr 	int howto;
    490   1.1       gwr 	char *user_boot_string;
    491   1.1       gwr {
    492   1.2       gwr 	/* Note: this string MUST be static! */
    493   1.2       gwr 	static char bootstr[128];
    494   1.2       gwr 	char *p;
    495   1.1       gwr 
    496   1.1       gwr 	/* If system is cold, just halt. (early panic?) */
    497   1.1       gwr 	if (cold)
    498   1.1       gwr 		goto haltsys;
    499   1.1       gwr 
    500  1.24       gwr 	/* Un-blank the screen if appropriate. */
    501  1.24       gwr 	cnpollc(1);
    502  1.24       gwr 
    503   1.1       gwr 	if ((howto & RB_NOSYNC) == 0) {
    504   1.1       gwr 		reboot_sync();
    505   1.1       gwr 		/*
    506   1.1       gwr 		 * If we've been adjusting the clock, the todr
    507   1.1       gwr 		 * will be out of synch; adjust it now.
    508   1.1       gwr 		 *
    509   1.1       gwr 		 * XXX - However, if the kernel has been sitting in ddb,
    510   1.1       gwr 		 * the time will be way off, so don't set the HW clock!
    511   1.1       gwr 		 * XXX - Should do sanity check against HW clock. -gwr
    512   1.1       gwr 		 */
    513   1.1       gwr 		/* resettodr(); */
    514   1.1       gwr 	}
    515   1.1       gwr 
    516   1.1       gwr 	/* Disable interrupts. */
    517   1.1       gwr 	splhigh();
    518   1.1       gwr 
    519   1.1       gwr 	/* Write out a crash dump if asked. */
    520   1.1       gwr 	if (howto & RB_DUMP)
    521   1.1       gwr 		dumpsys();
    522   1.1       gwr 
    523   1.1       gwr 	/* run any shutdown hooks */
    524   1.1       gwr 	doshutdownhooks();
    525   1.1       gwr 
    526   1.1       gwr 	if (howto & RB_HALT) {
    527   1.1       gwr 	haltsys:
    528  1.63       chs 		printf("halted.\n");
    529  1.61   tsutsui 		sunmon_halt();
    530   1.1       gwr 	}
    531   1.1       gwr 
    532   1.1       gwr 	/*
    533   1.1       gwr 	 * Automatic reboot.
    534   1.1       gwr 	 */
    535   1.2       gwr 	if (user_boot_string)
    536   1.2       gwr 		strncpy(bootstr, user_boot_string, sizeof(bootstr));
    537   1.2       gwr 	else {
    538   1.1       gwr 		/*
    539   1.1       gwr 		 * Build our own boot string with an empty
    540   1.1       gwr 		 * boot device/file and (maybe) some flags.
    541   1.1       gwr 		 * The PROM will supply the device/file name.
    542   1.1       gwr 		 */
    543   1.2       gwr 		p = bootstr;
    544   1.2       gwr 		*p = '\0';
    545   1.1       gwr 		if (howto & (RB_KDB|RB_ASKNAME|RB_SINGLE)) {
    546   1.1       gwr 			/* Append the boot flags. */
    547   1.1       gwr 			*p++ = ' ';
    548   1.1       gwr 			*p++ = '-';
    549   1.1       gwr 			if (howto & RB_KDB)
    550   1.1       gwr 				*p++ = 'd';
    551   1.1       gwr 			if (howto & RB_ASKNAME)
    552   1.1       gwr 				*p++ = 'a';
    553   1.1       gwr 			if (howto & RB_SINGLE)
    554   1.1       gwr 				*p++ = 's';
    555   1.1       gwr 			*p = '\0';
    556   1.1       gwr 		}
    557   1.1       gwr 	}
    558  1.63       chs 	printf("rebooting...\n");
    559   1.3       gwr 	sunmon_reboot(bootstr);
    560   1.1       gwr 	for (;;) ;
    561   1.1       gwr 	/*NOTREACHED*/
    562   1.1       gwr }
    563   1.1       gwr 
    564   1.1       gwr /*
    565   1.1       gwr  * These variables are needed by /sbin/savecore
    566   1.1       gwr  */
    567  1.77   tsutsui u_int32_t dumpmag = 0x8fca0101;	/* magic number */
    568   1.1       gwr int 	dumpsize = 0;		/* pages */
    569   1.1       gwr long	dumplo = 0; 		/* blocks */
    570   1.1       gwr 
    571  1.71   tsutsui #define DUMP_EXTRA	1	/* CPU-dependent extra pages */
    572  1.71   tsutsui 
    573   1.1       gwr /*
    574  1.11       gwr  * This is called by main to set dumplo, dumpsize.
    575  1.86   thorpej  * Dumps always skip the first PAGE_SIZE of disk space
    576   1.1       gwr  * in case there might be a disk label stored there.
    577   1.1       gwr  * If there is extra space, put dump at the end to
    578   1.1       gwr  * reduce the chance that swapping trashes it.
    579   1.1       gwr  */
    580   1.1       gwr void
    581  1.11       gwr cpu_dumpconf()
    582   1.1       gwr {
    583  1.81   gehenna 	const struct bdevsw *bdev;
    584  1.71   tsutsui 	int devblks;	/* size of dump device in blocks */
    585  1.71   tsutsui 	int dumpblks;	/* size of dump image in blocks */
    586   1.1       gwr 	int (*getsize)__P((dev_t));
    587   1.1       gwr 
    588   1.1       gwr 	if (dumpdev == NODEV)
    589   1.1       gwr 		return;
    590   1.1       gwr 
    591  1.81   gehenna 	bdev = bdevsw_lookup(dumpdev);
    592  1.81   gehenna 	if (bdev == NULL)
    593   1.1       gwr 		panic("dumpconf: bad dumpdev=0x%x", dumpdev);
    594  1.81   gehenna 	getsize = bdev->d_psize;
    595   1.1       gwr 	if (getsize == NULL)
    596   1.1       gwr 		return;
    597  1.71   tsutsui 	devblks = (*getsize)(dumpdev);
    598  1.71   tsutsui 	if (devblks <= ctod(1))
    599   1.1       gwr 		return;
    600  1.71   tsutsui 	devblks &= ~(ctod(1) - 1);
    601  1.71   tsutsui 
    602  1.71   tsutsui 	/*
    603  1.71   tsutsui 	 * Note: savecore expects dumpsize to be the
    604  1.71   tsutsui 	 * number of pages AFTER the dump header.
    605  1.71   tsutsui 	 */
    606  1.71   tsutsui 	dumpsize = physmem; 	/* pages */
    607   1.1       gwr 
    608   1.1       gwr 	/* Position dump image near end of space, page aligned. */
    609  1.71   tsutsui 	dumpblks = ctod(physmem + DUMP_EXTRA);
    610  1.71   tsutsui 	dumplo = devblks - dumpblks;
    611   1.1       gwr 
    612   1.1       gwr 	/* If it does not fit, truncate it by moving dumplo. */
    613   1.1       gwr 	/* Note: Must force signed comparison. */
    614   1.1       gwr 	if (dumplo < ((long)ctod(1))) {
    615   1.1       gwr 		dumplo = ctod(1);
    616  1.71   tsutsui 		dumpsize = dtoc(devblks - dumplo) - DUMP_EXTRA;
    617   1.1       gwr 	}
    618   1.1       gwr }
    619   1.1       gwr 
    620  1.13       gwr /* Note: gdb looks for "dumppcb" in a kernel crash dump. */
    621   1.1       gwr struct pcb dumppcb;
    622   1.1       gwr 
    623   1.1       gwr /*
    624   1.1       gwr  * Write a crash dump.  The format while in swap is:
    625   1.1       gwr  *   kcore_seg_t cpu_hdr;
    626   1.1       gwr  *   cpu_kcore_hdr_t cpu_data;
    627  1.86   thorpej  *   padding (PAGE_SIZE-sizeof(kcore_seg_t))
    628  1.86   thorpej  *   pagemap (2*PAGE_SIZE)
    629   1.1       gwr  *   physical memory...
    630   1.1       gwr  */
    631   1.1       gwr void
    632   1.1       gwr dumpsys()
    633   1.1       gwr {
    634  1.81   gehenna 	const struct bdevsw *dsw;
    635  1.66       chs 	kcore_seg_t *kseg_p;
    636  1.10       gwr 	cpu_kcore_hdr_t *chdr_p;
    637  1.14   thorpej 	struct sun3x_kcore_hdr *sh;
    638  1.14   thorpej 	phys_ram_seg_t *crs_p;
    639   1.1       gwr 	char *vaddr;
    640  1.73   tsutsui 	paddr_t paddr;
    641  1.10       gwr 	int psize, todo, seg, segsz;
    642   1.1       gwr 	daddr_t blkno;
    643   1.1       gwr 	int error = 0;
    644   1.1       gwr 
    645   1.1       gwr 	if (dumpdev == NODEV)
    646   1.1       gwr 		return;
    647  1.81   gehenna 	dsw = bdevsw_lookup(dumpdev);
    648  1.81   gehenna 	if (dsw == NULL || dsw->d_psize == NULL)
    649  1.81   gehenna 		return;
    650   1.1       gwr 
    651   1.1       gwr 	/*
    652   1.1       gwr 	 * For dumps during autoconfiguration,
    653   1.1       gwr 	 * if dump device has already configured...
    654   1.1       gwr 	 */
    655   1.1       gwr 	if (dumpsize == 0)
    656  1.11       gwr 		cpu_dumpconf();
    657  1.28   mycroft 	if (dumplo <= 0) {
    658  1.28   mycroft 		printf("\ndump to dev %u,%u not possible\n", major(dumpdev),
    659  1.28   mycroft 		    minor(dumpdev));
    660   1.1       gwr 		return;
    661  1.28   mycroft 	}
    662   1.1       gwr 	savectx(&dumppcb);
    663   1.1       gwr 
    664   1.1       gwr 	psize = (*(dsw->d_psize))(dumpdev);
    665   1.1       gwr 	if (psize == -1) {
    666   1.1       gwr 		printf("dump area unavailable\n");
    667   1.1       gwr 		return;
    668   1.1       gwr 	}
    669   1.1       gwr 
    670  1.28   mycroft 	printf("\ndumping to dev %u,%u offset %ld\n", major(dumpdev),
    671  1.28   mycroft 	    minor(dumpdev), dumplo);
    672   1.1       gwr 
    673   1.1       gwr 	/*
    674  1.71   tsutsui 	 * Prepare the dump header
    675   1.1       gwr 	 */
    676  1.71   tsutsui 	blkno = dumplo;
    677  1.71   tsutsui 	todo = dumpsize;	/* pages */
    678  1.71   tsutsui 	vaddr = (char *)dumppage;
    679  1.86   thorpej 	memset(vaddr, 0, PAGE_SIZE);
    680  1.25       gwr 
    681  1.25       gwr 	/* Set pointers to all three parts. */
    682  1.71   tsutsui 	kseg_p = (kcore_seg_t *)vaddr;
    683  1.66       chs 	chdr_p = (cpu_kcore_hdr_t *)(kseg_p + 1);
    684  1.14   thorpej 	sh = &chdr_p->un._sun3x;
    685  1.25       gwr 
    686  1.25       gwr 	/* Fill in kcore_seg_t part. */
    687  1.10       gwr 	CORE_SETMAGIC(*kseg_p, KCORE_MAGIC, MID_MACHINE, CORE_CPU);
    688  1.71   tsutsui 	kseg_p->c_size = (ctob(DUMP_EXTRA) - sizeof(*kseg_p));
    689  1.25       gwr 
    690  1.25       gwr 	/* Fill in cpu_kcore_hdr_t part. */
    691  1.46       gwr 	strncpy(chdr_p->name, kernel_arch, sizeof(chdr_p->name));
    692  1.86   thorpej 	chdr_p->page_size = PAGE_SIZE;
    693  1.25       gwr 	chdr_p->kernbase = KERNBASE;
    694  1.25       gwr 
    695  1.25       gwr 	/* Fill in the sun3x_kcore_hdr part. */
    696  1.25       gwr 	pmap_kcore_hdr(sh);
    697  1.10       gwr 
    698  1.71   tsutsui 	/* Write out the dump header. */
    699  1.86   thorpej 	error = (*dsw->d_dump)(dumpdev, blkno, vaddr, PAGE_SIZE);
    700  1.71   tsutsui 	if (error)
    701  1.71   tsutsui 		goto fail;
    702  1.86   thorpej 	blkno += btodb(PAGE_SIZE);
    703  1.71   tsutsui 
    704  1.10       gwr 	/*
    705  1.10       gwr 	 * Now dump physical memory.  Note that physical memory
    706  1.10       gwr 	 * might NOT be congiguous, so do it by segments.
    707  1.10       gwr 	 */
    708  1.10       gwr 
    709  1.66       chs 	vaddr = (char *)vmmap;	/* Borrow /dev/mem VA */
    710   1.1       gwr 
    711  1.14   thorpej 	for (seg = 0; seg < SUN3X_NPHYS_RAM_SEGS; seg++) {
    712  1.14   thorpej 		crs_p = &sh->ram_segs[seg];
    713  1.10       gwr 		paddr = crs_p->start;
    714  1.10       gwr 		segsz = crs_p->size;
    715   1.1       gwr 
    716  1.10       gwr 		while (todo && (segsz > 0)) {
    717   1.1       gwr 
    718  1.10       gwr 			/* Print pages left after every 16. */
    719  1.10       gwr 			if ((todo & 0xf) == 0)
    720  1.10       gwr 				printf("\r%4d", todo);
    721  1.10       gwr 
    722  1.10       gwr 			/* Make a temporary mapping for the page. */
    723  1.76       chs 			pmap_kenter_pa(vmmap, paddr | PMAP_NC, VM_PROT_READ);
    724  1.75     chris 			pmap_update(pmap_kernel());
    725  1.86   thorpej 			error = (*dsw->d_dump)(dumpdev, blkno, vaddr,
    726  1.86   thorpej 					       PAGE_SIZE);
    727  1.86   thorpej 			pmap_kremove(vmmap, PAGE_SIZE);
    728  1.75     chris 			pmap_update(pmap_kernel());
    729  1.10       gwr 			if (error)
    730  1.10       gwr 				goto fail;
    731  1.86   thorpej 			paddr += PAGE_SIZE;
    732  1.86   thorpej 			segsz -= PAGE_SIZE;
    733  1.86   thorpej 			blkno += btodb(PAGE_SIZE);
    734  1.10       gwr 			todo--;
    735  1.10       gwr 		}
    736  1.10       gwr 	}
    737   1.1       gwr 	printf("\rdump succeeded\n");
    738   1.1       gwr 	return;
    739   1.1       gwr fail:
    740   1.1       gwr 	printf(" dump error=%d\n", error);
    741   1.1       gwr }
    742   1.1       gwr 
    743   1.1       gwr static void
    744   1.1       gwr initcpu()
    745   1.1       gwr {
    746   1.1       gwr 	/* XXX: Enable RAM parity/ECC checking? */
    747   1.1       gwr 	/* XXX: parityenable(); */
    748   1.1       gwr 
    749   1.1       gwr #ifdef	HAVECACHE
    750   1.1       gwr 	cache_enable();
    751   1.1       gwr #endif
    752   1.1       gwr }
    753   1.1       gwr 
    754   1.8       gwr /* straptrap() in trap.c */
    755   1.1       gwr 
    756   1.1       gwr /* from hp300: badaddr() */
    757  1.15       gwr /* peek_byte(), peek_word() moved to bus_subr.c */
    758   1.1       gwr 
    759   1.1       gwr /* XXX: parityenable() ? */
    760   1.7       gwr /* regdump() moved to regdump.c */
    761   1.1       gwr 
    762   1.1       gwr /*
    763   1.1       gwr  * cpu_exec_aout_makecmds():
    764   1.1       gwr  *	cpu-dependent a.out format hook for execve().
    765   1.1       gwr  *
    766   1.1       gwr  * Determine if the given exec package refers to something which we
    767   1.1       gwr  * understand and, if so, set up the vmcmds for it.
    768   1.1       gwr  */
    769   1.1       gwr int
    770  1.89      fvdl cpu_exec_aout_makecmds(p, epp)
    771  1.89      fvdl 	struct proc *p;
    772   1.1       gwr 	struct exec_package *epp;
    773   1.1       gwr {
    774  1.27        tv 	return ENOEXEC;
    775   1.1       gwr }
    776