xref: /src/sys/arch/vax/conf/GENERIC

#	$NetBSD: GENERIC,v 1.63 2000/04/22 16:48:53 ragge Exp $
#
# GENERIC VAX configuration file; all supported devices.
#

include		"arch/vax/conf/std.vax"

#ident 		"GENERIC-$Revision: 1.63 $"

# Here are all different supported CPU types listed.
options 	"VAX8600"
options 	"VAX8200"
options 	"VAX780"
options 	"VAX750"
options 	"VAX630"	# MV II
options 	"VAX650"	# MV III, 3600, 3800, 3900
options 	"VAX670"	# VAX 4000/300
options 	"VAX410"	# VS 2000
options 	"VAX43"		# VS 3100/76
options 	"VAX46"		# VS 4000/60
options 	"VAX48"		# VS 4000 VLC
options 	"VAX49"		# VS 4000/90

# Max users on system; this is just a hint
maxusers	8

# Kernel compiled-in symbolic debugger & system call tracer
#makeoptions	DEBUG="-g"
#options 	DDB
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
options 	KTRACE
#options 	DIAGNOSTIC
#options 	DEBUG,KMEMSTATS,PMAPDEBUG,TRAPDEBUG

options 	SCSIVERBOSE		# Verbose SCSI errors

# Pull in config fragments for kernel crypto.  This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.

#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix

#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix

# Network support
#options 	GATEWAY
options		NTP		# NTP kernel support
options         INET		# IPv4
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security

# All supported filesystem types
file-system 	FFS
file-system 	LFS
file-system 	MFS
file-system 	NFS
file-system 	FDESC
file-system 	KERNFS
file-system 	NULLFS
file-system 	OVERLAY		# overlay file system
file-system 	PROCFS
file-system 	UMAPFS
file-system 	UNION
file-system 	CD9660

options 	QUOTA
#options 	FFS_EI		# FFS Endian Independant support
#options 	SOFTDEP         # FFS soft updates support.
options 	NFSSERVER
options 	NFS_BOOT_BOOTP,NFS_BOOT_DHCP	# Use bootp <> dhcp
options 	NFS_BOOT_BOOTPARAM	# Use the Sun way for netbooting.

# WS console uses VT100 terminal emulation
options 	WSEMUL_VT100
options 	WSDISPLAY_DEFAULTSCREENS=8

# System V shared memory & semaphores support.
options 	SYSVMSG
options 	SYSVSEM
options 	SYSVSHM

# Old compat stuff; needed to run 4.3BSD Reno programs.
# Note that if COMPAT_ULTRIX is set, you lose compatibility with
# 4.3BSD Reno programs and get Ultrix compatibility instead.
# (They cannot coexist).
options 	COMPAT_VAX1K	# Must be present to run pre-1.4 binaries.
options 	COMPAT_43
options 	COMPAT_09
options 	COMPAT_10
options 	COMPAT_11
options 	COMPAT_12
options 	COMPAT_13
options 	COMPAT_14
#options 	COMPAT_ULTRIX
options 	COMPAT_IBCS2	# DEC SVR.3 compatilibity

options 	LKM

# Kernel(s) to compile
config          netbsd root on ? type ?

mainbus0	at root

# All buses; from the beginning attached to mainbus.
abus0		at mainbus0		# Master bus on VAX 8600
sbi0		at mainbus0		# SBI, master bus on 11/780.
cmi0		at mainbus0		# 11/750 internal bus.
bi0		at mainbus0		# VAX 8200 
vsbus0		at mainbus0		# All VAXstations
ibus0		at mainbus0		# All Microvax
#nbi0		at mainbus0		# VAX 8800
#xmi0		at mainbus0		# VAX 6000

# Vsbus, the virtual VAXstation bus, and possible devices.
le0		at vsbus0 csr 0x200e0000 # LANCE ethernet
ze0		at vsbus0 csr 0x20008000 # SGEC ethernet
dz0		at vsbus0 csr 0x200a0000 # DC-367 DZ-11 lookalike ctlr
dz0		at vsbus0 csr 0x25000000 # VS4000/90 serial line
#hdc0		at vsbus0 csr 0x200c0000 # HDC9224 MFM/floppy ctlr
ncr0		at vsbus0 csr 0x200c0080 # VS2000/3100 SCSI-ctlr
asc0		at vsbus0 csr 0x200c0080 # VS4000 SCSI-ctlr
ncr1		at vsbus0 csr 0x200c0180 # VS2000/3100 SCSI-ctlr
smg0		at vsbus0 csr 0x200f0000 # Small monochrome display ctlr.
#clr0		at vsbus0 csr 0x30000000 # 4- or 8-bitplans color graphics

#rd*		at hdc0 drive?		# RD5x disks
#ry*		at hdc0 drive?		# RX floppies

# Ibus, the internal bus on most Microvaxen
uba0		at ibus0 		# Qbus adapter
ze0		at ibus0 		# SGEC on-board ethernet
#shac0		at ibus0 		# DSSI controller

# Devices connected at VAXBI
cpu*		at bi? node?		# KA820/KA825 cpu
mem*		at bi? node?		# Memory subsystems
#uba*		at bi? node?		# DWBUA BI-Unibus adapter
#ni*		at bi? node?		# DEBNA/DEBNT ethernet adapter
#kdb*		at bi? node?		# KDB50 MSCP disk ctlr
#mscpbus*	at kdb?

# CMI (VAX 11/750)
mem*		at cmi? tr?		# Memory subsystems
uba*		at cmi? tr?		# Unibus adapters
mba*		at cmi? tr?		# Massbus adapters

# SBI (VAX 11/780, VAX 8600)
sbi*		at abus0		# VAX 8600 can have up to 4 SBI's.

mem*		at sbi? tr?		# Memory subsystems
uba*		at sbi? tr?		# Unibus adapters
mba*		at sbi? tr?		# Massbus adapters

# Devices on Massbus adapters
hp*		at mba? drive?		# RM/RP disk drives

# Devices on Unibus/Qbus adapters
uda0		at uba?	csr 0172150	# UDA50/RQDX?
uda1		at uba?	csr 0160334
mtc0		at uba? csr 0174500	# Tape MSCP ctlr
#ts0		at uba? csr 0172520	# TS11/TSV05 tape.
#qd0		at uba? csr 0177400	# 4- or 8-bitplans color graphics
#qv0		at uba? csr 0177400	# Monochrome graphics
#de0		at uba? csr 0174510	# DELUA/DEUNA
qe0		at uba? csr 0174440	# DEQNA/DELQA
dhu0		at uba? csr 0160440	# DHU-11
dz0		at uba? csr 0160100	# DZ-11
dl0		at uba? csr 0176500	# DL-11
rlc0		at uba? csr 0174400	# RL11/RLV11 controller
rl*		at rlc? drive?		# RL01/RL02 disk drive

# MSCP devices
mscpbus*	at uda?
mscpbus*	at mtc?
#mscpbus*	at kdb?

ra*		at mscpbus? drive?	# MSCP disk
rx*		at mscpbus? drive?	# MSCP floppy
mt*		at mscpbus? drive?	# MSCP tape

# VS2000 builtin MFM controller (HDC9224)
#hdc0		at vsbus0		# The strange builtin MFM controller

# SCSI devices
scsibus*	at asc?
scsibus*	at ncr?

sd*		at scsibus? target? lun?
st*		at scsibus? target? lun?
cd*		at scsibus? target? lun?
ch*		at scsibus? target? lun?
ss*		at scsibus? target? lun?
uk*		at scsibus? target? lun?

# VAXstation graphics support
wsdisplay0	at smg0
#wsdisplay0	at clr0
#wsdisplay0	at qd0
#wsdisplay0	at qv0
lkc0		at dz0

pseudo-device   loop	1
pseudo-device   pty	48
pseudo-device	bpfilter 8		# Not supported by de yet.
pseudo-device	sl	2
pseudo-device	ppp	2
pseudo-device	tun	2
#pseudo-device	gre	2		# generic L3 over IP tunnel
pseudo-device	gif	4		# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith	1		# IPv[46] tcp relay translation i/f
#pseudo-device	stf	1		# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	tb	1
pseudo-device	vnd	4
pseudo-device	ccd	4
#pseudo-device	raid	4		# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
# rnd is EXPERIMENTAL
#pseudo-device	rnd			# /dev/random and in-kernel generator