xref: /src/sys/arch/vax/conf/INSTALL

#	$NetBSD: INSTALL,v 1.48 2008/03/11 05:43:17 matt Exp $
#
# INSTALL kernel; all supported devices but nothing fancy.
#

include		"arch/vax/conf/std.vax"

#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

makeoptions	COPTS="-Os"	# Optimise for space. Implies -O2

# Here are all different supported CPU types listed.
options 	VAX8600
options 	VAX8200
options 	VAX780
options 	VAX750
options 	VAX630		# MV II
options 	VAX650		# MV III, 3300, 3400, 3500, 3600, 3800, 3900
options 	VAX660		# VAX 4000/200
options 	VAX670		# VAX 4000/300
options 	VAX680		# VAX 4000/[45]00
options 	VAX410		# VS 2000
options 	VAX43		# VS 3100/76
options 	VAX46		# VS 4000/60
options 	VAX48		# VS 4000 VLC
options 	VAX49		# VS 4000/90
options 	VAX53		# VAX 4000/105A

# Max users on system; this is just a hint
maxusers	8

# Enable the hooks used for initializing the root memory-disk.
options 	MEMORY_DISK_HOOKS
options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
options 	MEMORY_DISK_ROOT_SIZE=3072	# size of memory disk, in blocks


# Kernel compiled-in symbolic debugger & system call tracer
#options 	DDB
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
#options 	KTRACE
#options 	DIAGNOSTIC,DEBUG,KMEMSTATS,PMAPDEBUG,TRAPDEBUG

#options 	SCSIVERBOSE		# Verbose SCSI errors

# Network support
#options 	GATEWAY
options 	INET

# File systems
file-system 	FFS
#file-system 	LFS
#file-system 	MFS
file-system 	NFS
#file-system 	FDESC
file-system 	KERNFS
#file-system 	NULLFS
#file-system 	PROCFS
#file-system 	UMAPFS
#file-system 	UNION
file-system 	CD9660
#file-system	PTYFS		# /dev/pts/N support

# Filesystem options
#options 	QUOTA
#options 	FFS_EI		# FFS Endian Independant support
#options 	NFSSERVER
#options 	NFS_V2_ONLY	# Exclude NFS3 code to save space
options 	FFS_NO_SNAPSHOT	# No FFS snapshot support

#options 	NFS_BOOT_BOOTP,NFS_BOOT_DHCP	# Use bootp <> dhcp
#options 	NFS_BOOT_BOOTPARAM	# Use the Sun way for netbooting.

# WS console uses VT100 terminal emulation
options 	WSEMUL_VT100
#options 	WSDISPLAY_DEFAULTSCREENS=8

# System V shared memory & semaphores support.
#options 	SYSVMSG
#options 	SYSVSEM
#options 	SYSVSHM

# Old compat stuff; needed to run 4.3BSD Reno programs.
# Note that if COMPAT_ULTRIX is set, you lose compatibility with
# 4.3BSD Reno programs and get Ultrix compatibility instead.
# (They cannot coexist).
#options 	COMPAT_VAX1K	# Must be present to run pre-1.4 binaries.
#options 	COMPAT_43
#options 	COMPAT_09
#options 	COMPAT_10
#options 	COMPAT_11
#options 	COMPAT_12
#options 	COMPAT_13
options 	COMPAT_14
options 	COMPAT_15
options 	COMPAT_20
options 	COMPAT_30	# NetBSD 3.0 compatibility.
#options 	COMPAT_ULTRIX
options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.

#options 	LKM

options 	USERCONF	# userconf(4) support
options		PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Kernel(s) to compile
config		netbsd root on ? type ?

mainbus0	at root

# Devices directly attached to mainbus.
sbi*		at mainbus0	# SBI's, VAX-11/78[05] main bus
bi*		at mainbus0	# VAXBI bus
cmi0		at mainbus0	# 11/750 internal bus.
vsbus0		at mainbus0	# Internal "virtual" VAXstation bus
sbi*		at mainbus0	# SBI adapter
uba0		at mainbus0	# Q-Bus adapter
ze0		at mainbus0	# SGEC on-board ethernet
le0		at mainbus0	# LANCE

# Devices connected at VAXBI
cpu0		at bi? node?	# KA820/KA825 CPU
cpu*		at bi? node?
mem*		at bi? node?	# Memory subsystems
#uba*		at bi? node?	# DWBUA BI-Unibus adapter
#ni*		at bi? node?	# DEBNA/DEBNT ethernet adapter
kdb*		at bi? node?	# KDB50 MSCP disk ctlr
mscpbus*	at kdb?

# Devices connected at cmi
mem*		at cmi? tr?	# Memory subsystems
uba*		at cmi? tr?	# Unibus adapters
mba*		at cmi? tr?	# Massbus adapters

# Devices connected at abus

# Devices connected at sbi
mem*		at sbi? tr?	# Memory subsystems
uba*		at sbi? tr?	# Unibus adapters
mba*		at sbi? tr?	# Massbus adapters

# Devices on Massbus adapters
hp*		at mba? drive?	# RM/RP disk drives

# Devices on internal MicroVAX bus
#asc0		at ibus?	# VAX 4000/105A SCSI ctlr

# Disk controllers at Unibus
uda*		at uba?	csr 0172150	# UDA50/RQDX?
uda*		at uba?	csr 0160334
mscpbus*	at uda?

# Tape drivers
mtc*		at uba? csr 0174500	# Tape MSCP ctlr
mscpbus*	at mtc?

# MSCP devices
ra*		at mscpbus? drive?	# MSCP disk
rx*		at mscpbus? drive?	# MSCP floppy
mt*		at mscpbus? drive?	# MSCP tape

# Unibus tapes
#ts*		at uba? csr 0172520	# TS11/TSV05 tape.

# VS2000 builtin MFM controller (HDC9224)
hdc0		at vsbus0 csr 0x200c0000 # HDC9224 MFM/floppy ctlr
rd*		at hdc0 drive?		# RD5x disks

# SCSI controllers.
asc0		at vsbus0 csr 0x200c0080 # VS4000/{60,VLC} SCSI-controller
asc0		at vsbus0 csr 0x26000080 # VS4000/90 SCSI-controller
si0		at vsbus0 csr 0x200c0080 # VS2000/3100 SCSI-controller (5380)
si1		at vsbus0 csr 0x200c0180 # VS2000/3100 SCSI-controller (5380)
scsibus*	at asc?
scsibus*	at si?

# SCSI devices
sd*		at scsibus? target? lun?
st*		at scsibus? target? lun?
cd*		at scsibus? target? lun?
#ch*		at scsibus? target? lun?
#ss*		at scsibus? target? lun?
#uk*		at scsibus? target? lun?

# Ethernet cards
de*		at uba? csr 0174510	# DELUA/DEUNA
qe*		at uba? csr 0174440	# DEQNA/DELQA
qe*		at uba? csr 0174460	# DEQNA/DELQA
le0		at vsbus0 csr 0x200e0000 # LANCE ethernet


# Terminal lines
dhu*		at uba? csr 0160440	# DHU-11
dz*		at uba? csr 0160100	# DZ-11
dz0		at vsbus0 csr 0x200a0000# DC-367
dz0		at vsbus0 csr 0x25000000# VS4000/90 and VAX 4000/10x serial lines
dl*		at uba? csr 0176500	# DL-11

# VAXstation graphics support
#qd0		at uba? csr 0177400
smg0		at vsbus0 csr 0x200f0000# Small monochrome display ctlr.
wsdisplay0	at smg0			# display device driver.
lkkbd0		at dz0 line 0		# Keyboard LK201
wskbd0		at lkkbd0		# wscons keyboard

pseudo-device	loop	1
pseudo-device	pty		2	# pseudo-terminals (Sysinst needs two)
#pseudo-device	bpfilter
#pseudo-device	tun	
#pseudo-device	gre			# generic L3 over IP tunnel
#pseudo-device	vnd	
#pseudo-device	ccd	4
#pseudo-device	raid	4		# RAIDframe disk driver
#pseudo-device	fss	4		# file system snapshot device
pseudo-device	rnd			# /dev/random and in-kernel generator
pseudo-device	md	1