asc_vsbus.c revision 1.13 1 /* $NetBSD: asc_vsbus.c,v 1.13 2000/05/17 21:22:20 matt Exp $ */
2
3 /*-
4 * Copyright (c) 1998 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Charles M. Hannum.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by the NetBSD
21 * Foundation, Inc. and its contributors.
22 * 4. Neither the name of The NetBSD Foundation nor the names of its
23 * contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 * POSSIBILITY OF SUCH DAMAGE.
37 */
38
39 #include "opt_vax46.h"
40
41 #include <sys/cdefs.h> /* RCS ID & Copyright macro defns */
42
43 __KERNEL_RCSID(0, "$NetBSD: asc_vsbus.c,v 1.13 2000/05/17 21:22:20 matt Exp $");
44
45 #include <sys/types.h>
46 #include <sys/param.h>
47 #include <sys/systm.h>
48 #include <sys/kernel.h>
49 #include <sys/errno.h>
50 #include <sys/ioctl.h>
51 #include <sys/device.h>
52 #include <sys/buf.h>
53 #include <sys/proc.h>
54 #include <sys/user.h>
55 #include <sys/reboot.h>
56 #include <sys/queue.h>
57
58 #include <dev/scsipi/scsi_all.h>
59 #include <dev/scsipi/scsipi_all.h>
60 #include <dev/scsipi/scsiconf.h>
61 #include <dev/scsipi/scsi_message.h>
62
63 #include <machine/bus.h>
64 #include <machine/vmparam.h>
65
66 #include <dev/ic/ncr53c9xreg.h>
67 #include <dev/ic/ncr53c9xvar.h>
68
69 #include <machine/cpu.h>
70 #include <machine/sid.h>
71 #include <machine/scb.h>
72 #include <machine/vsbus.h>
73 #include <machine/clock.h> /* for SCSI ctlr ID# XXX */
74
75 struct asc_vsbus_softc {
76 struct ncr53c9x_softc sc_ncr53c9x; /* Must be first */
77 bus_space_tag_t sc_bst; /* bus space tag */
78 bus_space_handle_t sc_bsh; /* bus space handle */
79 bus_space_handle_t sc_dirh; /* scsi direction handle */
80 bus_space_handle_t sc_adrh; /* scsi address handle */
81 bus_space_handle_t sc_ncrh; /* ncr bus space handle */
82 bus_dma_tag_t sc_dmat; /* bus dma tag */
83 bus_dmamap_t sc_dmamap;
84 caddr_t *sc_dmaaddr;
85 size_t *sc_dmalen;
86 size_t sc_dmasize;
87 unsigned int sc_flags;
88 #define ASC_FROMMEMORY 0x0001 /* Must be 1 */
89 #define ASC_DMAACTIVE 0x0002
90 #define ASC_MAPLOADED 0x0004
91 unsigned long sc_xfers;
92 };
93
94 #define ASC_REG_KA46_ADR 0x0000
95 #define ASC_REG_KA46_DIR 0x000C
96 #define ASC_REG_KA49_ADR 0x0000
97 #define ASC_REG_KA49_DIR 0x0004
98 #define ASC_REG_NCR 0x0080
99 #define ASC_REG_END 0x00B0
100
101 #define ASC_MAXXFERSIZE 65536
102 #define ASC_FREQUENCY 25000000
103
104 static int asc_vsbus_match __P((struct device *, struct cfdata *, void *));
105 static void asc_vsbus_attach __P((struct device *, struct device *, void *));
106
107 struct cfattach asc_vsbus_ca = {
108 sizeof(struct asc_vsbus_softc), asc_vsbus_match, asc_vsbus_attach
109 };
110
111 static struct scsipi_device asc_vsbus_dev = {
112 NULL, /* Use the default error handler */
113 NULL, /* have a queue, served by this */
114 NULL, /* have no async handler */
115 NULL, /* use the default done handler */
116 };
117
118 /*
119 * Functions and the switch for the MI code
120 */
121 static u_char asc_vsbus_read_reg __P((struct ncr53c9x_softc *, int));
122 static void asc_vsbus_write_reg __P((struct ncr53c9x_softc *, int, u_char));
123 static int asc_vsbus_dma_isintr __P((struct ncr53c9x_softc *));
124 static void asc_vsbus_dma_reset __P((struct ncr53c9x_softc *));
125 static int asc_vsbus_dma_intr __P((struct ncr53c9x_softc *));
126 static int asc_vsbus_dma_setup __P((struct ncr53c9x_softc *, caddr_t *,
127 size_t *, int, size_t *));
128 static void asc_vsbus_dma_go __P((struct ncr53c9x_softc *));
129 static void asc_vsbus_dma_stop __P((struct ncr53c9x_softc *));
130 static int asc_vsbus_dma_isactive __P((struct ncr53c9x_softc *));
131
132 static struct ncr53c9x_glue asc_vsbus_glue = {
133 asc_vsbus_read_reg,
134 asc_vsbus_write_reg,
135 asc_vsbus_dma_isintr,
136 asc_vsbus_dma_reset,
137 asc_vsbus_dma_intr,
138 asc_vsbus_dma_setup,
139 asc_vsbus_dma_go,
140 asc_vsbus_dma_stop,
141 asc_vsbus_dma_isactive,
142 NULL,
143 };
144
145 static u_int8_t asc_attached; /* can't have more than one asc */
146
147 static int
148 asc_vsbus_match( struct device *parent, struct cfdata *cf, void *aux)
149 {
150 struct vsbus_attach_args *va = aux;
151 volatile u_int8_t *ncr_regs;
152 int dummy;
153
154 if (asc_attached)
155 return 0;
156
157 if (vax_boardtype != VAX_BTYP_46
158 && vax_boardtype != VAX_BTYP_48
159 && vax_boardtype != VAX_BTYP_49)
160 return 0;
161
162 if (vax_boardtype == VAX_BTYP_49 && cf->cf_loc[0] != 0x26000080)
163 return 0;
164
165 if ((vax_boardtype == VAX_BTYP_46 || vax_boardtype == VAX_BTYP_48)
166 && cf->cf_loc[0] != 0x200c0080)
167 return 0;
168
169 ncr_regs = (volatile u_int8_t *) va->va_addr;
170
171 /* *** need to generate an interrupt here
172 * From trial and error, I've determined that an INT is generated
173 * only when the following sequence of events occurs:
174 * 1) The interrupt status register (0x05) must be read.
175 * 2) SCSI bus reset interrupt must be enabled
176 * 3) SCSI bus reset command must be sent
177 * 4) NOP command must be sent
178 */
179
180 dummy = ncr_regs[NCR_INTR << 2] & 0xFF;
181 ncr_regs[NCR_CFG1 << 2] = 0x06; /* we're ID 6, turn on INT for SCSI reset */
182 ncr_regs[NCR_CMD << 2] = NCRCMD_RSTSCSI; /* send the reset */
183 ncr_regs[NCR_CMD << 2] = NCRCMD_NOP; /* send a NOP */
184 DELAY(10000);
185
186 dummy = ncr_regs[NCR_INTR << 2] & 0xFF;
187 printf("ncr intr = %d\n", dummy);
188 return (dummy & NCRINTR_SBR) != 0;
189 }
190
191
192 /*
193 * Attach this instance, and then all the sub-devices
194 */
195 static void
196 asc_vsbus_attach(struct device *parent, struct device *self, void *aux)
197 {
198 struct vsbus_attach_args *va = aux;
199 struct asc_vsbus_softc *asc = (void *)self;
200 struct ncr53c9x_softc *sc = &asc->sc_ncr53c9x;
201 int error;
202
203 asc_attached = 1;
204 /*
205 * Set up glue for MI code early; we use some of it here.
206 */
207 sc->sc_glue = &asc_vsbus_glue;
208
209 asc->sc_bst = va->va_iot;
210 asc->sc_dmat = va->va_dmat;
211
212 error = bus_space_map(asc->sc_bst, va->va_paddr - ASC_REG_NCR,
213 ASC_REG_END, 0, &asc->sc_bsh);
214 if (error) {
215 printf(": failed to map registers: error=%d\n", error);
216 return;
217 }
218 error = bus_space_subregion(asc->sc_bst, asc->sc_bsh, ASC_REG_NCR,
219 ASC_REG_END - ASC_REG_NCR, &asc->sc_ncrh);
220 if (error) {
221 printf(": failed to map ncr registers: error=%d\n", error);
222 return;
223 }
224 if (vax_boardtype == VAX_BTYP_46 || vax_boardtype == VAX_BTYP_48) {
225 error = bus_space_subregion(asc->sc_bst, asc->sc_bsh,
226 ASC_REG_KA46_ADR, sizeof(u_int32_t), &asc->sc_adrh);
227 if (error) {
228 printf(": failed to map adr register: error=%d\n",
229 error);
230 return;
231 }
232 error = bus_space_subregion(asc->sc_bst, asc->sc_bsh,
233 ASC_REG_KA46_DIR, sizeof(u_int32_t), &asc->sc_dirh);
234 if (error) {
235 printf(": failed to map dir register: error=%d\n",
236 error);
237 return;
238 }
239 } else {
240 /* This is a gross and disgusting kludge but it'll
241 * save a bunch of ugly code. Unlike the VS4000/60,
242 * the SCSI Address and direction registers are not
243 * near the SCSI NCR registers and are inside the
244 * block of general VAXstation registers. So we grab
245 * them from there and knowing the internals of the
246 * bus_space implementation, we cast to bus_space_handles.
247 */
248 struct vsbus_softc *vsc = (struct vsbus_softc *) parent;
249 asc->sc_adrh = (bus_space_handle_t) (vsc->sc_vsregs + ASC_REG_KA49_ADR);
250 asc->sc_dirh = (bus_space_handle_t) (vsc->sc_vsregs + ASC_REG_KA49_DIR);
251 }
252 error = bus_dmamap_create(asc->sc_dmat, ASC_MAXXFERSIZE, 1,
253 ASC_MAXXFERSIZE, 0, BUS_DMA_NOWAIT, &asc->sc_dmamap);
254
255 switch (vax_boardtype) {
256 #if defined(VAX46)
257 case VAX_BTYP_46:
258 sc->sc_id = (clk_page[0xbc/2] >> clk_tweak) & 7;
259 break;
260 #endif
261 default:
262 sc->sc_id = 6; /* XXX need to get this from VMB */
263 break;
264 }
265
266 sc->sc_freq = ASC_FREQUENCY;
267
268 /* gimme Mhz */
269 sc->sc_freq /= 1000000;
270
271 scb_vecalloc(va->va_cvec, (void (*)(void *)) ncr53c9x_intr,
272 &asc->sc_ncr53c9x, SCB_ISTACK);
273
274 /*
275 * XXX More of this should be in ncr53c9x_attach(), but
276 * XXX should we really poke around the chip that much in
277 * XXX the MI code? Think about this more...
278 */
279
280 /*
281 * Set up static configuration info.
282 */
283 sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
284 sc->sc_cfg2 = NCRCFG2_SCSI2;
285 sc->sc_cfg3 = 0;
286 sc->sc_rev = NCR_VARIANT_NCR53C94;
287
288 /*
289 * XXX minsync and maxxfer _should_ be set up in MI code,
290 * XXX but it appears to have some dependency on what sort
291 * XXX of DMA we're hooked up to, etc.
292 */
293
294 /*
295 * This is the value used to start sync negotiations
296 * Note that the NCR register "SYNCTP" is programmed
297 * in "clocks per byte", and has a minimum value of 4.
298 * The SCSI period used in negotiation is one-fourth
299 * of the time (in nanoseconds) needed to transfer one byte.
300 * Since the chip's clock is given in MHz, we have the following
301 * formula: 4 * period = (1000 / freq) * 4
302 */
303 sc->sc_minsync = (1000 / sc->sc_freq);
304 sc->sc_maxxfer = 63 * 1024;
305
306 printf("\n%s", self->dv_xname); /* Pretty print */
307
308 /* Do the common parts of attachment. */
309 sc->sc_adapter.scsipi_cmd = ncr53c9x_scsi_cmd;
310 sc->sc_adapter.scsipi_minphys = minphys;
311 ncr53c9x_attach(sc, &asc_vsbus_dev);
312 }
313
314 /*
315 * Glue functions.
316 */
317
318 static u_char
319 asc_vsbus_read_reg(struct ncr53c9x_softc *sc, int reg)
320 {
321 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
322
323 return bus_space_read_1(asc->sc_bst, asc->sc_ncrh,
324 reg * sizeof(u_int32_t));
325 }
326
327 static void
328 asc_vsbus_write_reg(sc, reg, val)
329 struct ncr53c9x_softc *sc;
330 int reg;
331 u_char val;
332 {
333 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
334
335 bus_space_write_1(asc->sc_bst, asc->sc_ncrh,
336 reg * sizeof(u_int32_t), val);
337 }
338
339 static int
340 asc_vsbus_dma_isintr(sc)
341 struct ncr53c9x_softc *sc;
342 {
343 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
344 return bus_space_read_1(asc->sc_bst, asc->sc_ncrh,
345 NCR_STAT * sizeof(u_int32_t)) & NCRSTAT_INT;
346 }
347
348 static void
349 asc_vsbus_dma_reset(sc)
350 struct ncr53c9x_softc *sc;
351 {
352 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
353
354 if (asc->sc_flags & ASC_MAPLOADED)
355 bus_dmamap_unload(asc->sc_dmat, asc->sc_dmamap);
356 asc->sc_flags &= ~(ASC_DMAACTIVE|ASC_MAPLOADED);
357 }
358
359 static int
360 asc_vsbus_dma_intr(sc)
361 struct ncr53c9x_softc *sc;
362 {
363 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
364 u_int tcl, tcm;
365 int trans, resid;
366
367 if ((asc->sc_flags & ASC_DMAACTIVE) == 0)
368 panic("asc_vsbus_dma_intr: DMA wasn't active");
369
370 asc->sc_flags &= ~ASC_DMAACTIVE;
371
372 if (asc->sc_dmasize == 0) {
373 /* A "Transfer Pad" operation completed */
374 tcl = NCR_READ_REG(sc, NCR_TCL);
375 tcm = NCR_READ_REG(sc, NCR_TCM);
376 NCR_DMA(("asc_vsbus_intr: discarded %d bytes (tcl=%d, tcm=%d)\n",
377 tcl | (tcm << 8), tcl, tcm));
378 return 0;
379 }
380
381 resid = 0;
382 if ((resid = (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF)) != 0) {
383 NCR_DMA(("asc_vsbus_intr: empty FIFO of %d ", resid));
384 DELAY(1);
385 }
386 if (asc->sc_flags & ASC_MAPLOADED) {
387 bus_dmamap_sync(asc->sc_dmat, asc->sc_dmamap,
388 0, asc->sc_dmasize,
389 asc->sc_flags & ASC_FROMMEMORY
390 ? BUS_DMASYNC_POSTWRITE
391 : BUS_DMASYNC_POSTREAD);
392 bus_dmamap_unload(asc->sc_dmat, asc->sc_dmamap);
393 }
394 asc->sc_flags &= ~ASC_MAPLOADED;
395
396 resid += (tcl = NCR_READ_REG(sc, NCR_TCL));
397 resid += (tcm = NCR_READ_REG(sc, NCR_TCM)) << 8;
398
399 trans = asc->sc_dmasize - resid;
400 if (trans < 0) { /* transferred < 0 ? */
401 printf("asc_vsbus_intr: xfer (%d) > req (%d)\n",
402 trans, asc->sc_dmasize);
403 trans = asc->sc_dmasize;
404 }
405 NCR_DMA(("asc_vsbus_intr: tcl=%d, tcm=%d; trans=%d, resid=%d\n",
406 tcl, tcm, trans, resid));
407
408 *asc->sc_dmalen -= trans;
409 *asc->sc_dmaaddr += trans;
410
411 asc->sc_xfers++;
412 return 0;
413 }
414
415 static int
416 asc_vsbus_dma_setup(struct ncr53c9x_softc *sc, caddr_t *addr, size_t *len,
417 int datain, size_t *dmasize)
418 {
419 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
420
421 asc->sc_dmaaddr = addr;
422 asc->sc_dmalen = len;
423 if (datain) {
424 asc->sc_flags &= ~ASC_FROMMEMORY;
425 } else {
426 asc->sc_flags |= ASC_FROMMEMORY;
427 }
428 if ((vaddr_t) *asc->sc_dmaaddr < VM_MIN_KERNEL_ADDRESS)
429 panic("asc_vsbus_dma_setup: dma address (%p) outside of kernel",
430 *asc->sc_dmaaddr);
431
432 NCR_DMA(("%s: start %d@%p,%d\n", sc->sc_dev.dv_xname,
433 (int)*asc->sc_dmalen, *asc->sc_dmaaddr, (asc->sc_flags & ASC_FROMMEMORY)));
434 *dmasize = asc->sc_dmasize = min(*dmasize, ASC_MAXXFERSIZE);
435
436 if (asc->sc_dmasize) {
437 if (bus_dmamap_load(asc->sc_dmat, asc->sc_dmamap,
438 *asc->sc_dmaaddr, asc->sc_dmasize,
439 NULL /* kernel address */,
440 BUS_DMA_NOWAIT|VAX_BUS_DMA_SPILLPAGE))
441 panic("%s: cannot load dma map", sc->sc_dev.dv_xname);
442 bus_dmamap_sync(asc->sc_dmat, asc->sc_dmamap,
443 0, asc->sc_dmasize,
444 asc->sc_flags & ASC_FROMMEMORY
445 ? BUS_DMASYNC_PREWRITE
446 : BUS_DMASYNC_PREREAD);
447 bus_space_write_4(asc->sc_bst, asc->sc_adrh, 0,
448 asc->sc_dmamap->dm_segs[0].ds_addr);
449 bus_space_write_4(asc->sc_bst, asc->sc_dirh, 0,
450 asc->sc_flags & ASC_FROMMEMORY);
451 asc->sc_flags |= ASC_MAPLOADED;
452 }
453
454 return 0;
455 }
456
457 static void
458 asc_vsbus_dma_go(struct ncr53c9x_softc *sc)
459 {
460 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
461
462 asc->sc_flags |= ASC_DMAACTIVE;
463 }
464
465 static void
466 asc_vsbus_dma_stop(struct ncr53c9x_softc *sc)
467 {
468 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
469
470 if (asc->sc_flags & ASC_MAPLOADED) {
471 bus_dmamap_sync(asc->sc_dmat, asc->sc_dmamap,
472 0, asc->sc_dmasize,
473 asc->sc_flags & ASC_FROMMEMORY
474 ? BUS_DMASYNC_POSTWRITE
475 : BUS_DMASYNC_POSTREAD);
476 bus_dmamap_unload(asc->sc_dmat, asc->sc_dmamap);
477 }
478
479 asc->sc_flags &= ~(ASC_DMAACTIVE|ASC_MAPLOADED);
480 }
481
482 static int
483 asc_vsbus_dma_isactive(struct ncr53c9x_softc *sc)
484 {
485 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
486
487 return (asc->sc_flags & ASC_DMAACTIVE) != 0;
488 }
489