asc_vsbus.c revision 1.35 1 /* $NetBSD: asc_vsbus.c,v 1.35 2007/03/04 19:21:56 christos Exp $ */
2
3 /*-
4 * Copyright (c) 1998 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Charles M. Hannum.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by the NetBSD
21 * Foundation, Inc. and its contributors.
22 * 4. Neither the name of The NetBSD Foundation nor the names of its
23 * contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 * POSSIBILITY OF SUCH DAMAGE.
37 */
38
39 #include <sys/cdefs.h> /* RCS ID & Copyright macro defns */
40
41 __KERNEL_RCSID(0, "$NetBSD: asc_vsbus.c,v 1.35 2007/03/04 19:21:56 christos Exp $");
42
43 #include "locators.h"
44 #include "opt_cputype.h"
45
46 #include <sys/types.h>
47 #include <sys/param.h>
48 #include <sys/systm.h>
49 #include <sys/kernel.h>
50 #include <sys/errno.h>
51 #include <sys/ioctl.h>
52 #include <sys/device.h>
53 #include <sys/buf.h>
54 #include <sys/proc.h>
55 #include <sys/user.h>
56 #include <sys/reboot.h>
57 #include <sys/queue.h>
58
59 #include <dev/scsipi/scsi_all.h>
60 #include <dev/scsipi/scsipi_all.h>
61 #include <dev/scsipi/scsiconf.h>
62 #include <dev/scsipi/scsi_message.h>
63
64 #include <machine/bus.h>
65 #include <machine/vmparam.h>
66
67 #include <dev/ic/ncr53c9xreg.h>
68 #include <dev/ic/ncr53c9xvar.h>
69
70 #include <machine/cpu.h>
71 #include <machine/sid.h>
72 #include <machine/scb.h>
73 #include <machine/vsbus.h>
74 #include <machine/clock.h> /* for SCSI ctlr ID# XXX */
75
76 struct asc_vsbus_softc {
77 struct ncr53c9x_softc sc_ncr53c9x; /* Must be first */
78 struct evcnt sc_intrcnt; /* count interrupts */
79 bus_space_tag_t sc_bst; /* bus space tag */
80 bus_space_handle_t sc_bsh; /* bus space handle */
81 bus_space_handle_t sc_dirh; /* scsi direction handle */
82 bus_space_handle_t sc_adrh; /* scsi address handle */
83 bus_space_handle_t sc_ncrh; /* ncr bus space handle */
84 bus_dma_tag_t sc_dmat; /* bus DMA tag */
85 bus_dmamap_t sc_dmamap;
86 void **sc_dmaaddr;
87 size_t *sc_dmalen;
88 size_t sc_dmasize;
89 unsigned int sc_flags;
90 #define ASC_FROMMEMORY 0x0001 /* Must be 1 */
91 #define ASC_DMAACTIVE 0x0002
92 #define ASC_MAPLOADED 0x0004
93 unsigned long sc_xfers;
94 };
95
96 #define ASC_REG_KA46_ADR 0x0000
97 #define ASC_REG_KA46_DIR 0x000C
98 #define ASC_REG_KA49_ADR 0x0000
99 #define ASC_REG_KA49_DIR 0x0004
100 #define ASC_REG_NCR 0x0080
101 #define ASC_REG_END 0x00B0
102
103 #define ASC_MAXXFERSIZE 65536
104 #define ASC_FREQUENCY 25000000
105
106 static int asc_vsbus_match(struct device *, struct cfdata *, void *);
107 static void asc_vsbus_attach(struct device *, struct device *, void *);
108
109 CFATTACH_DECL(asc_vsbus, sizeof(struct asc_vsbus_softc),
110 asc_vsbus_match, asc_vsbus_attach, NULL, NULL);
111
112 /*
113 * Functions and the switch for the MI code
114 */
115 static u_char asc_vsbus_read_reg(struct ncr53c9x_softc *, int);
116 static void asc_vsbus_write_reg(struct ncr53c9x_softc *, int, u_char);
117 static int asc_vsbus_dma_isintr(struct ncr53c9x_softc *);
118 static void asc_vsbus_dma_reset(struct ncr53c9x_softc *);
119 static int asc_vsbus_dma_intr(struct ncr53c9x_softc *);
120 static int asc_vsbus_dma_setup(struct ncr53c9x_softc *, void **,
121 size_t *, int, size_t *);
122 static void asc_vsbus_dma_go(struct ncr53c9x_softc *);
123 static void asc_vsbus_dma_stop(struct ncr53c9x_softc *);
124 static int asc_vsbus_dma_isactive(struct ncr53c9x_softc *);
125
126 static struct ncr53c9x_glue asc_vsbus_glue = {
127 asc_vsbus_read_reg,
128 asc_vsbus_write_reg,
129 asc_vsbus_dma_isintr,
130 asc_vsbus_dma_reset,
131 asc_vsbus_dma_intr,
132 asc_vsbus_dma_setup,
133 asc_vsbus_dma_go,
134 asc_vsbus_dma_stop,
135 asc_vsbus_dma_isactive,
136 NULL,
137 };
138
139 static u_int8_t asc_attached; /* can't have more than one asc */
140
141 static int
142 asc_vsbus_match( struct device *parent, struct cfdata *cf, void *aux)
143 {
144 struct vsbus_attach_args *va = aux;
145 volatile u_int8_t *ncr_regs;
146 int dummy;
147
148 if (asc_attached)
149 return 0;
150
151 if (vax_boardtype == VAX_BTYP_46 || vax_boardtype == VAX_BTYP_48) {
152 if (cf->cf_loc[VSBUSCF_CSR] != 0x200c0080)
153 return 0;
154 } else if (vax_boardtype == VAX_BTYP_49 ||
155 vax_boardtype == VAX_BTYP_53) {
156 if (cf->cf_loc[VSBUSCF_CSR] != 0x26000080)
157 return 0;
158 } else {
159 return 0;
160 }
161
162 ncr_regs = (volatile u_int8_t *) va->va_addr;
163
164 /* *** need to generate an interrupt here
165 * From trial and error, I've determined that an INT is generated
166 * only when the following sequence of events occurs:
167 * 1) The interrupt status register (0x05) must be read.
168 * 2) SCSI bus reset interrupt must be enabled
169 * 3) SCSI bus reset command must be sent
170 * 4) NOP command must be sent
171 */
172
173 dummy = ncr_regs[NCR_INTR << 2] & 0xFF;
174 ncr_regs[NCR_CFG1 << 2] = 0x06; /* we're ID 6, turn on INT for SCSI reset */
175 ncr_regs[NCR_CMD << 2] = NCRCMD_RSTSCSI; /* send the reset */
176 ncr_regs[NCR_CMD << 2] = NCRCMD_NOP; /* send a NOP */
177 DELAY(10000);
178
179 dummy = ncr_regs[NCR_INTR << 2] & 0xFF;
180 return (dummy & NCRINTR_SBR) != 0;
181 }
182
183
184 /*
185 * Attach this instance, and then all the sub-devices
186 */
187 static void
188 asc_vsbus_attach(struct device *parent, struct device *self, void *aux)
189 {
190 struct vsbus_attach_args *va = aux;
191 struct asc_vsbus_softc *asc = (void *)self;
192 struct ncr53c9x_softc *sc = &asc->sc_ncr53c9x;
193 int error;
194
195 asc_attached = 1;
196 /*
197 * Set up glue for MI code early; we use some of it here.
198 */
199 sc->sc_glue = &asc_vsbus_glue;
200
201 asc->sc_bst = va->va_iot;
202 asc->sc_dmat = va->va_dmat;
203
204 error = bus_space_map(asc->sc_bst, va->va_paddr - ASC_REG_NCR,
205 ASC_REG_END, 0, &asc->sc_bsh);
206 if (error) {
207 printf(": failed to map registers: error=%d\n", error);
208 return;
209 }
210 error = bus_space_subregion(asc->sc_bst, asc->sc_bsh, ASC_REG_NCR,
211 ASC_REG_END - ASC_REG_NCR, &asc->sc_ncrh);
212 if (error) {
213 printf(": failed to map ncr registers: error=%d\n", error);
214 return;
215 }
216 if (vax_boardtype == VAX_BTYP_46 || vax_boardtype == VAX_BTYP_48) {
217 error = bus_space_subregion(asc->sc_bst, asc->sc_bsh,
218 ASC_REG_KA46_ADR, sizeof(u_int32_t), &asc->sc_adrh);
219 if (error) {
220 printf(": failed to map adr register: error=%d\n",
221 error);
222 return;
223 }
224 error = bus_space_subregion(asc->sc_bst, asc->sc_bsh,
225 ASC_REG_KA46_DIR, sizeof(u_int32_t), &asc->sc_dirh);
226 if (error) {
227 printf(": failed to map dir register: error=%d\n",
228 error);
229 return;
230 }
231 } else {
232 /* This is a gross and disgusting kludge but it'll
233 * save a bunch of ugly code. Unlike the VS4000/60,
234 * the SCSI Address and direction registers are not
235 * near the SCSI NCR registers and are inside the
236 * block of general VAXstation registers. So we grab
237 * them from there and knowing the internals of the
238 * bus_space implementation, we cast to bus_space_handles.
239 */
240 struct vsbus_softc *vsc = (struct vsbus_softc *) parent;
241 asc->sc_adrh = (bus_space_handle_t) (vsc->sc_vsregs + ASC_REG_KA49_ADR);
242 asc->sc_dirh = (bus_space_handle_t) (vsc->sc_vsregs + ASC_REG_KA49_DIR);
243 #if 0
244 printf("\n%s: adrh=0x%08lx dirh=0x%08lx", self->dv_xname,
245 asc->sc_adrh, asc->sc_dirh);
246 ncr53c9x_debug = NCR_SHOWDMA|NCR_SHOWINTS|NCR_SHOWCMDS|NCR_SHOWPHASE|NCR_SHOWSTART|NCR_SHOWMSGS;
247 #endif
248 }
249 error = bus_dmamap_create(asc->sc_dmat, ASC_MAXXFERSIZE, 1,
250 ASC_MAXXFERSIZE, 0, BUS_DMA_NOWAIT, &asc->sc_dmamap);
251
252 /* SCSI ID is store in the clock NVRAM at magic address 0xbc */
253 sc->sc_id = (clk_page[0xbc/2] >> clk_tweak) & 7;
254 sc->sc_freq = ASC_FREQUENCY;
255
256 /* gimme MHz */
257 sc->sc_freq /= 1000000;
258
259 scb_vecalloc(va->va_cvec, (void (*)(void *)) ncr53c9x_intr,
260 &asc->sc_ncr53c9x, SCB_ISTACK, &asc->sc_intrcnt);
261 evcnt_attach_dynamic(&asc->sc_intrcnt, EVCNT_TYPE_INTR, NULL,
262 self->dv_xname, "intr");
263
264 /*
265 * XXX More of this should be in ncr53c9x_attach(), but
266 * XXX should we really poke around the chip that much in
267 * XXX the MI code? Think about this more...
268 */
269
270 /*
271 * Set up static configuration info.
272 */
273 sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
274 sc->sc_cfg2 = NCRCFG2_SCSI2;
275 sc->sc_cfg3 = 0;
276 sc->sc_rev = NCR_VARIANT_NCR53C94;
277
278 /*
279 * XXX minsync and maxxfer _should_ be set up in MI code,
280 * XXX but it appears to have some dependency on what sort
281 * XXX of DMA we're hooked up to, etc.
282 */
283
284 /*
285 * This is the value used to start sync negotiations
286 * Note that the NCR register "SYNCTP" is programmed
287 * in "clocks per byte", and has a minimum value of 4.
288 * The SCSI period used in negotiation is one-fourth
289 * of the time (in nanoseconds) needed to transfer one byte.
290 * Since the chip's clock is given in MHz, we have the following
291 * formula: 4 * period = (1000 / freq) * 4
292 */
293 sc->sc_minsync = (1000 / sc->sc_freq);
294 sc->sc_maxxfer = 64 * 1024;
295
296 printf("\n%s", self->dv_xname); /* Pretty print */
297
298 /* Do the common parts of attachment. */
299 sc->sc_adapter.adapt_minphys = minphys;
300 sc->sc_adapter.adapt_request = ncr53c9x_scsipi_request;
301 ncr53c9x_attach(sc);
302 }
303
304 /*
305 * Glue functions.
306 */
307
308 static u_char
309 asc_vsbus_read_reg(struct ncr53c9x_softc *sc, int reg)
310 {
311 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
312
313 return bus_space_read_1(asc->sc_bst, asc->sc_ncrh,
314 reg * sizeof(u_int32_t));
315 }
316
317 static void
318 asc_vsbus_write_reg(sc, reg, val)
319 struct ncr53c9x_softc *sc;
320 int reg;
321 u_char val;
322 {
323 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
324
325 bus_space_write_1(asc->sc_bst, asc->sc_ncrh,
326 reg * sizeof(u_int32_t), val);
327 }
328
329 static int
330 asc_vsbus_dma_isintr(sc)
331 struct ncr53c9x_softc *sc;
332 {
333 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
334 return bus_space_read_1(asc->sc_bst, asc->sc_ncrh,
335 NCR_STAT * sizeof(u_int32_t)) & NCRSTAT_INT;
336 }
337
338 static void
339 asc_vsbus_dma_reset(sc)
340 struct ncr53c9x_softc *sc;
341 {
342 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
343
344 if (asc->sc_flags & ASC_MAPLOADED)
345 bus_dmamap_unload(asc->sc_dmat, asc->sc_dmamap);
346 asc->sc_flags &= ~(ASC_DMAACTIVE|ASC_MAPLOADED);
347 }
348
349 static int
350 asc_vsbus_dma_intr(sc)
351 struct ncr53c9x_softc *sc;
352 {
353 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
354 u_int tcl, tcm;
355 int trans, resid;
356
357 if ((asc->sc_flags & ASC_DMAACTIVE) == 0)
358 panic("asc_vsbus_dma_intr: DMA wasn't active");
359
360 asc->sc_flags &= ~ASC_DMAACTIVE;
361
362 if (asc->sc_dmasize == 0) {
363 /* A "Transfer Pad" operation completed */
364 tcl = NCR_READ_REG(sc, NCR_TCL);
365 tcm = NCR_READ_REG(sc, NCR_TCM);
366 NCR_DMA(("asc_vsbus_intr: discarded %d bytes (tcl=%d, tcm=%d)\n",
367 tcl | (tcm << 8), tcl, tcm));
368 return 0;
369 }
370
371 resid = 0;
372 if ((resid = (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF)) != 0) {
373 NCR_DMA(("asc_vsbus_intr: empty FIFO of %d ", resid));
374 DELAY(1);
375 }
376 if (asc->sc_flags & ASC_MAPLOADED) {
377 bus_dmamap_sync(asc->sc_dmat, asc->sc_dmamap,
378 0, asc->sc_dmasize,
379 asc->sc_flags & ASC_FROMMEMORY
380 ? BUS_DMASYNC_POSTWRITE
381 : BUS_DMASYNC_POSTREAD);
382 bus_dmamap_unload(asc->sc_dmat, asc->sc_dmamap);
383 }
384 asc->sc_flags &= ~ASC_MAPLOADED;
385
386 resid += (tcl = NCR_READ_REG(sc, NCR_TCL));
387 resid += (tcm = NCR_READ_REG(sc, NCR_TCM)) << 8;
388
389 trans = asc->sc_dmasize - resid;
390 if (trans < 0) { /* transferred < 0 ? */
391 printf("asc_vsbus_intr: xfer (%d) > req (%lu)\n",
392 trans, (u_long) asc->sc_dmasize);
393 trans = asc->sc_dmasize;
394 }
395 NCR_DMA(("asc_vsbus_intr: tcl=%d, tcm=%d; trans=%d, resid=%d\n",
396 tcl, tcm, trans, resid));
397
398 *asc->sc_dmalen -= trans;
399 *asc->sc_dmaaddr = (char *)*asc->sc_dmaaddr + trans;
400
401 asc->sc_xfers++;
402 return 0;
403 }
404
405 static int
406 asc_vsbus_dma_setup(struct ncr53c9x_softc *sc, void **addr, size_t *len,
407 int datain, size_t *dmasize)
408 {
409 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
410
411 asc->sc_dmaaddr = addr;
412 asc->sc_dmalen = len;
413 if (datain) {
414 asc->sc_flags &= ~ASC_FROMMEMORY;
415 } else {
416 asc->sc_flags |= ASC_FROMMEMORY;
417 }
418 if ((vaddr_t) *asc->sc_dmaaddr < VM_MIN_KERNEL_ADDRESS)
419 panic("asc_vsbus_dma_setup: DMA address (%p) outside of kernel",
420 *asc->sc_dmaaddr);
421
422 NCR_DMA(("%s: start %d@%p,%d\n", sc->sc_dev.dv_xname,
423 (int)*asc->sc_dmalen, *asc->sc_dmaaddr, (asc->sc_flags & ASC_FROMMEMORY)));
424 *dmasize = asc->sc_dmasize = min(*dmasize, ASC_MAXXFERSIZE);
425
426 if (asc->sc_dmasize) {
427 if (bus_dmamap_load(asc->sc_dmat, asc->sc_dmamap,
428 *asc->sc_dmaaddr, asc->sc_dmasize,
429 NULL /* kernel address */,
430 BUS_DMA_NOWAIT|VAX_BUS_DMA_SPILLPAGE))
431 panic("%s: cannot load DMA map", sc->sc_dev.dv_xname);
432 bus_dmamap_sync(asc->sc_dmat, asc->sc_dmamap,
433 0, asc->sc_dmasize,
434 asc->sc_flags & ASC_FROMMEMORY
435 ? BUS_DMASYNC_PREWRITE
436 : BUS_DMASYNC_PREREAD);
437 bus_space_write_4(asc->sc_bst, asc->sc_adrh, 0,
438 asc->sc_dmamap->dm_segs[0].ds_addr);
439 bus_space_write_4(asc->sc_bst, asc->sc_dirh, 0,
440 asc->sc_flags & ASC_FROMMEMORY);
441 NCR_DMA(("%s: dma-load %lu@0x%08lx\n", sc->sc_dev.dv_xname,
442 asc->sc_dmamap->dm_segs[0].ds_len,
443 asc->sc_dmamap->dm_segs[0].ds_addr));
444 asc->sc_flags |= ASC_MAPLOADED;
445 }
446
447 return 0;
448 }
449
450 static void
451 asc_vsbus_dma_go(struct ncr53c9x_softc *sc)
452 {
453 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
454
455 asc->sc_flags |= ASC_DMAACTIVE;
456 }
457
458 static void
459 asc_vsbus_dma_stop(struct ncr53c9x_softc *sc)
460 {
461 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
462
463 if (asc->sc_flags & ASC_MAPLOADED) {
464 bus_dmamap_sync(asc->sc_dmat, asc->sc_dmamap,
465 0, asc->sc_dmasize,
466 asc->sc_flags & ASC_FROMMEMORY
467 ? BUS_DMASYNC_POSTWRITE
468 : BUS_DMASYNC_POSTREAD);
469 bus_dmamap_unload(asc->sc_dmat, asc->sc_dmamap);
470 }
471
472 asc->sc_flags &= ~(ASC_DMAACTIVE|ASC_MAPLOADED);
473 }
474
475 static int
476 asc_vsbus_dma_isactive(struct ncr53c9x_softc *sc)
477 {
478 struct asc_vsbus_softc *asc = (struct asc_vsbus_softc *)sc;
479
480 return (asc->sc_flags & ASC_DMAACTIVE) != 0;
481 }
482