INSTALL revision 1.26.2.5
1 # $NetBSD: INSTALL,v 1.26.2.5 2002/01/06 20:12:21 he Exp $ 2 3 # 4 # INSTALL -- installation kernel. 5 # 6 7 include "arch/x68k/conf/std.x68k" 8 9 #ident "INSTALL-$Revision: 1.26.2.5 $" 10 11 maxusers 8 12 13 ## Enable the hooks used for initializing the memory-disk. 14 options MEMORY_DISK_HOOKS 15 options MEMORY_DISK_IS_ROOT # Force root on memory-disk 16 options MEMORY_DISK_SERVER=0 # No user space hooks 17 #options MINIROOTSIZE=2400 # 1.2M, same as a 130mm floppy 18 #options MINIROOTSIZE=2880 # 1.44M, same as a 90mm floppy 19 options MINIROOTSIZE=2400 20 21 ## System kernel configuration. See options(4) for more detail. 22 23 24 ## Options for variants of the m68k MPU 25 ## you must have at least the correct one; REQUIRED 26 options M68030 27 options M68040 28 options M68060 29 ## If you want an optimized kernel for a specific processor, use either: 30 #makeoptions CMACHFLAGS="-m68030" 31 #makeoptions CMACHFLAGS="-m68040 -Wa,-m68030 -Wa,-m68851" 32 #makeoptions CMACHFLAGS="-m68060 -Wa,-m68030 -Wa,-m68851" 33 34 35 #### System options specific to the x68k port 36 37 options EXTENDED_MEMORY # support for >16MB memory 38 options FPU_EMULATE # software fpu emulation for MC68030 39 options FPSP # floating point emulation for MC68040 40 options M060SP # int/fp emulation for MC68060 41 #options JUPITER # support for "Jupiter-X" accelerator 42 #options MAPPEDCOPY # use page mapping for large copyin/copyout 43 #options ZSCONSOLE,ZSCN_SPEED="9600" # use serial console 44 45 46 #### System options that are the same for all ports 47 48 ## Root device configuration: change the ?'s if you are going to use a 49 ## nonstandard root partition (other than where the kernel is booted from) 50 ## and/or nonstandard root type (not ffs or nfs). Normally this can be 51 ## automagically determined at boot time. 52 53 config netbsd root on ? type ? 54 #config netbsd root on sd0 type ffs 55 56 ## RTC is offset from GMT; -540 means JST-9 57 options RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT 58 59 ## System call tracing (see ktrace(1)). 60 #options KTRACE 61 62 ## Collect statistics on kernel malloc's and free's. This does have a 63 ## significant performance hit on slower machines, so it is intended for 64 ## diagnostic use only. 65 #options KMEMSTATS 66 67 ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 68 #options SYSVMSG # System V message queues 69 #options SYSVSEM # System V semaphores 70 #options SYSVSHM # System V shared memory 71 #options SHMMAXPGS=1024 # 1024 pages is the default 72 73 ## Loadable kernel module support 74 #options LKM 75 76 ## NFS boot options; not supported currently: needs nfsboot program 77 #options NFS_BOOT_BOOTPARAM 78 #options NFS_BOOT_BOOTP 79 #options NFS_BOOT_DHCP 80 81 #### Debugging options 82 83 ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 84 ## serial console break or keyboard reset, where the PROM would normally 85 ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 86 #options DDB # kernel dynamic debugger 87 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 88 #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 89 #options PANICBUTTON # interrupt switch invokes DDB 90 91 ## You may also use gdb, on another computer connected to this machine over 92 ## a serial port. Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is 93 ## a dev_t encoded device number of the serial port to use. 94 ## KGDB is not supported for now. 95 #options KGDB # support for kernel gdb 96 #options KGDBDEV=0xc00 # kgdb device number 97 #options KGDBRATE=9600 # baud rate 98 99 ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 100 ## such that gdb(1) can be used on a kernel coredump. 101 102 #makeoptions DEBUG="-g" 103 makeoptions COPTS="-Os" 104 105 ## Adds code to the kernel that does internal consistency checks, and will 106 ## cause the kernel to panic if corruption of internal data structures 107 ## is detected. 108 #options DIAGNOSTIC # extra kernel sanity checking 109 110 ## Enable (possibly expensive) debugging code that may also display messages 111 ## on the system console 112 #options DEBUG 113 114 ## Make SCSI error messages more verbose when explaining their meanings. 115 #options SCSIVERBOSE 116 117 ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 118 ## This allows writing to /dev/mem, loading kernel modules while multi-user, 119 ## and other insecurities good only for development work. Do not use this 120 ## option on a production machine. 121 #options INSECURE 122 123 ## Allow non-root users to grab /dev/console with programs such as xconsole. 124 ## `xconsole' therefore does not need setuid root with this option enabled. 125 #options UCONSOLE 126 127 ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 128 ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 129 ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 130 ## opaque file mechanism. Perl calls this "secure setuid scripts." 131 132 #options FDSCRIPTS 133 #options SETUIDSCRIPTS 134 135 ## Options for compatibility with previous releases foreign system binaries. 136 137 #options COMPAT_43 # 4.3BSD system interfaces 138 #options COMPAT_09 # NetBSD 0.9 binary compatibility 139 #options COMPAT_10 # NetBSD 1.0 binary compatibility 140 #options COMPAT_11 # NetBSD 1.1 binary compatibility 141 #options COMPAT_12 # NetBSD 1.2 binary compatibility 142 #options COMPAT_13 # NetBSD 1.3 binary compatibility 143 #options COMPAT_14 # NetBSD 1.4 binary compatibility 144 #options COMPAT_M68K4K # NetBSD/m68k4k binaries 145 #options COMPAT_SUNOS # SunOS 4.x binary compatibility; broken 146 #options COMPAT_SVR4 # SVR4 binary compatibility; broken 147 #options COMPAT_LINUX # Linux/m68k binary compatibility 148 #options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 149 150 ## File systems. 151 file-system FFS # Berkeley Fast Filesystem 152 file-system NFS # Sun NFS-compatible filesystem client 153 file-system KERNFS # kernel data-structure filesystem 154 #file-system NULLFS # NULL layered filesystem (buggy) 155 #file-system OVERLAY # overlay file system 156 #file-system MFS # memory-based filesystem 157 #file-system FDESC # user file descriptor filesystem 158 #file-system UMAPFS # uid/gid remapping filesystem 159 #file-system LFS # Log-structured filesystem (experimental) 160 #file-system PORTAL # portal filesystem (experimental) 161 #file-system PROCFS # /proc 162 file-system CD9660 # ISO 9660 + Rock Ridge file system 163 #file-system UNION # union file system (a little buggy) 164 file-system MSDOSFS # MS-DOS FAT filesystem(s). 165 #file-system ADOSFS # AmigaDOS filesystem 166 167 ## File system options. 168 #options NFSSERVER # Sun NFS-compatible filesystem server 169 #options QUOTA # FFS quotas 170 #options FFS_EI # FFS Endian Independent support 171 #options SOFTDEP # FFS soft updates support. 172 173 ## Network protocol support. In most environments, INET is required. 174 options INET # IP (Internet Protocol) v4 175 options INET6 # IPV6 176 #options IPSEC # IP security 177 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 178 #options IPSEC_DEBUG # debug for IP security 179 options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility 180 #options GATEWAY # packet forwarding ("router switch") 181 #options MROUTING # packet forwarding of multicast packets 182 #options DIRECTED_BROADCAST # allow broadcasts through routers 183 #options NS # Xerox NS networking 184 #options NSIP # Xerox NS tunneling over IP 185 #options ISO,TPIP # OSI networking 186 #options EON # OSI tunneling over IP 187 #options CCITT,LLC,HDLC # X.25 packet switched protocol 188 #options NETATALK # AppleTalk (over Ethernet) protocol 189 #options NTP # Network Time Protocol in-kernel support 190 #options PPS_SYNC # Add serial line synchronization for NTP 191 #options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 192 #options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 193 #options PPP_BSDCOMP # Add BSD compression to ppp device 194 #options PPP_DEFLATE # Add deflate (libz) compression to ppp device 195 #options PPP_FILTER # Add active filters for ppp (via bpf) 196 197 198 199 #### Device configurations 200 201 ## Fundamental devices; see also std.x68k 202 dmac0 at intio0 addr 0xe84000 # DMA controler 203 xel0 at intio0 204 opm0 at intio0 addr 0xe90000 # OPM: required for fdc 205 206 ## Display devices and console 207 grfbus0 at mainbus0 # bitmapped displays 208 grf0 at grfbus0 # multiplane graphics 209 #grf1 at grfbus0 # flexible graphics 210 211 kbd0 at mfp0 # standard keyboard 212 ite0 at grf0 # internal terminal emulator 213 options ITE_KERNEL_ATTR=4 # bold for kernel messages 214 # see /sys/arch/x68k/dev/itevar.h 215 #pseudo-device pow 2 # software power switch 216 217 ## floppy disks 218 fdc0 at intio0 addr 0xe94000 intr 96 dma 0 dmaintr 100 # floppy controler 219 fd* at fdc0 unit ? # builtin floppy drives 220 221 ## SCSI devices 222 scsirom0 at intio0 # SCSI BIOS 223 scsirom1 at intio0 # SCSI BIOS 224 spc* at scsirom? # genuin SCSI 225 scsibus* at spc? 226 mha0 at scsirom? # Mankai MK-HA1 (Mach-2) 227 scsibus* at mha0 228 229 sd* at scsibus? target ? lun ? # SCSI disks 230 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 231 st* at scsibus? target ? lun ? # SCSI tapes 232 #ss* at scsibus? target ? lun ? # SCSI scanners 233 #ch* at scsibus? target ? lun ? # SCSI changer devices 234 #uk* at scsibus? target ? lun ? # SCSI unknown devices 235 236 ## Ports 237 zsc0 at intio0 addr 0xe98000 intr 112 238 zstty0 at zsc0 channel 0 # built-in RS-232C 239 #ms0 at zsc0 channel 1 # standard mouse 240 #zsc1 at intio0 addr 0xeafc00 intr 113 241 #zstty2 at zsc1 channel 0 242 #zstty3 at zsc1 channel 1 243 #zsc2 at intio0 addr 0xeafc10 intr 114 244 #zstty4 at zsc2 channel 0 245 #zstty5 at zsc2 channel 1 246 #par0 at intio0 addr 0xe8c000 # Builtin printer port 247 248 pseudo-device sram # battery-backuped static RAM 249 #pseudo-device bell # OPM bell 250 251 #xcom0 at mainbus0 # NS16550 fast serial 252 #xcom1 at mainbus0 253 254 ## Audio device; broken 255 #okiadpcm0 at intio0 addr 0xe92000 intr 106 errintr 107 dma 3 256 #audio* at okiadpcm* 257 258 ## Network interfaces 259 ne* at intio0 addr 0xece300 intr 249 # Nereid Ethernet 260 neptune0 at intio0 addr 0xece000 intr 249 # Neptune-X 261 neptune1 at intio0 addr 0xece400 intr 249 # Neptune-X at alt. addr. 262 ne* at neptune? addr 0x300 # NE2000 or clone 263 #se0 at scsibus? target ? lun ? # Ether+; broken 264 265 266 #### Pseudo devices 267 268 ## A disk-like interface to files. Can be used to create floppy, CD, 269 ## miniroot images, etc. 270 271 #pseudo-device vnd 4 272 273 ## Concatenated and striped disks; with this, you can create a software-based 274 ## disk array similar to a "RAID 0" setup. See ccd(4). 275 276 pseudo-device ccd 4 277 278 ## RAIDframe disk driver: software RAID driver. See raid(4). 279 280 #pseudo-device raid 4 281 #options RAID_AUTOCONFIG # auto-configuration of RAID components 282 283 ## Memory disk device, used on boot floppies with compressed 284 ## kernel-plus-root-disk images. 285 286 pseudo-device md 1 287 288 ## Loopback network interface; required 289 pseudo-device loop 290 291 ## SLIP and CSLIP interfaces, for IP over a serial line. 292 pseudo-device sl 1 293 294 ## PPP, the successor to SLIP. See pppd(8). 295 #pseudo-device ppp 1 296 297 ## Network "tunnel" device, allowing protocol stacks to run in the userland. 298 ## This is used by the third-party user-mode "ppp" program, and others. 299 #pseudo-device tun 4 300 301 ## Generic L3 over IP tunnel 302 #pseudo-device gre 2 # generic L3 over IP tunnel 303 304 ## Berkeley Packet Filter, required to run RARPD. A generic C-language 305 ## interface that allows selective examining of incoming packets. 306 #pseudo-device bpfilter 8 307 308 ## IP Filter, used in firewall and NAT applications. See ipnat(8) for 309 ## one example of the use of the IP Filter. 310 #pseudo-device ipfilter 311 312 ## for IPv6 313 #pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 314 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 315 316 #### Other device configuration 317 318 ## Pseudo ttys, required for network logins and programs like screen. 319 ## 32 is a good number for average systems; you may have as many as you 320 ## like, though 256 is more or less the upper limit. Increasing this 321 ## number still requires you to run /dev/MAKEDEV to create the files 322 ## for the ptys. 323 324 pseudo-device pty 8 # pseudo-ttys (for network, etc.) 325 326 ## Random device, used to implement /dev/random (a source of random noise), 327 ## and generate randomness for some kernel formulae. 328 329 #pseudo-device rnd 330
Indexes created Wed Oct 29 12:09:47 GMT 2025