INSTALL revision 1.33
1#	$NetBSD: INSTALL,v 1.33 2000/09/25 11:46:40 abs Exp $
2
3#
4#	INSTALL -- installation kernel.
5#
6
7include "arch/x68k/conf/std.x68k"
8
9#ident 		"INSTALL-$Revision: 1.33 $"
10
11# Saving space
12makeoptions     COPTS="-Os"             # Optimise for space. Implies -O2
13#options        VNODE_OP_NOINLINE       # Don't inline vnode op calls
14#options        NFS_V2_ONLY             # Exclude NFS3 and NQNFS code
15
16maxusers	4
17
18## Enable the hooks used for initializing the memory-disk.
19options 	MEMORY_DISK_HOOKS
20options 	MEMORY_DISK_IS_ROOT     # Force root on memory-disk
21options 	MEMORY_DISK_SERVER=0	# No user space hooks
22#options 	MINIROOTSIZE=2400	# 1.2M, same as a 130mm floppy
23#options 	MINIROOTSIZE=2880	# 1.44M, same as a 90mm floppy
24options 	MINIROOTSIZE=2200
25
26## System kernel configuration.  See options(4) for more detail.
27
28
29## Options for variants of the m68k MPU
30## you must have at least the correct one; REQUIRED
31options 	M68030
32options 	M68040
33options 	M68060
34
35
36#### System options specific to the x68k port
37
38options 	EXTENDED_MEMORY		# support for >16MB memory
39options 	FPU_EMULATE		# software fpu emulation for MC68030
40options 	FPSP			# floating point emulation for MC68040
41options 	M060SP			# int/fp emulation for MC68060
42options 	JUPITER			# support for "Jupiter-X" accelerator
43#options 	MAPPEDCOPY		# use page mapping for large copyin/copyout
44#options 	ZSCONSOLE,ZSCN_SPEED="9600"	# use serial console
45
46
47#### System options that are the same for all ports
48
49## Root device configuration: change the ?'s if you are going to use a
50## nonstandard root partition (other than where the kernel is booted from)
51## and/or nonstandard root type (not ffs or nfs).  Normally this can be
52## automagically determined at boot time.
53
54config		netbsd	root on ? type ?
55#config		netbsd	root on sd0 type ffs
56
57## RTC is offset from GMT; -540 means JST-9
58options 	RTC_OFFSET=-540	# hardware clock is this many mins. west of GMT
59
60## System call tracing (see ktrace(1)).
61#options 	KTRACE
62
63## Collect statistics on kernel malloc's and free's.  This does have a
64## significant performance hit on slower machines, so it is intended for
65## diagnostic use only.
66#options 	KMEMSTATS
67
68## System V compatible IPC subsystem.  (msgctl(2), semctl(2), and shmctl(2))
69#options 	SYSVMSG		# System V message queues
70#options 	SYSVSEM		# System V semaphores
71#options 	SYSVSHM		# System V shared memory
72#options 	SHMMAXPGS=1024	# 1024 pages is the default
73
74## Loadable kernel module support
75#options 	LKM
76
77## NFS boot options; not supported currently: needs nfsboot program
78#options 	NFS_BOOT_BOOTPARAM
79#options 	NFS_BOOT_BOOTP
80#options 	NFS_BOOT_DHCP
81
82#### Debugging options
83
84## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
85## serial console break or keyboard reset, where the PROM would normally
86## intercept.  DDB_HISTORY_SIZE adds up/down arrow command history.
87#options 	DDB			# kernel dynamic debugger
88#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
89#options 	DDB_ONPANIC=1		# see also sysctl(8): `ddb.onpanic'
90#options 	PANICBUTTON		# interrupt switch invokes DDB
91
92## You may also use gdb, on another computer connected to this machine over
93## a serial port.  Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is
94## a dev_t encoded device number of the serial port to use.
95## KGDB is not supported for now.
96#options 	KGDB		# support for kernel gdb
97#options 	KGDBDEV=0xc00	# kgdb device number
98#options 	KGDBRATE=9600	# baud rate
99
100## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
101## such that gdb(1) can be used on a kernel coredump.
102
103#makeoptions 	DEBUG="-g"
104
105## Adds code to the kernel that does internal consistency checks, and will
106## cause the kernel to panic if corruption of internal data structures
107## is detected.
108#options 	DIAGNOSTIC	# extra kernel sanity checking
109
110## Enable (possibly expensive) debugging code that may also display messages
111## on the system console
112#options 	DEBUG
113
114## Make SCSI error messages more verbose when explaining their meanings.
115#options 	SCSIVERBOSE
116
117## `INSECURE' turns off the kernel security level (securelevel = 0 always).
118## This allows writing to /dev/mem, loading kernel modules while multi-user,
119## and other insecurities good only for development work.  Do not use this
120## option on a production machine.
121#options 	INSECURE
122
123## Allow non-root users to grab /dev/console with programs such as xconsole.
124## `xconsole' therefore does not need setuid root with this option enabled.
125#options 	UCONSOLE
126
127## `FDSCRIPTS' allows non-readable but executable scripts by providing a
128## pre-opened opaque file to the script interpreter.  `SETUIDSCRIPTS',
129## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
130## opaque file mechanism.  Perl calls this "secure setuid scripts."
131
132#options 	FDSCRIPTS
133#options 	SETUIDSCRIPTS
134
135## Options for compatibility with previous releases foreign system binaries.
136
137#options 	COMPAT_43	# 4.3BSD system interfaces
138#options 	COMPAT_09	# NetBSD 0.9 binary compatibility
139#options 	COMPAT_10	# NetBSD 1.0 binary compatibility
140#options 	COMPAT_11	# NetBSD 1.1 binary compatibility
141#options 	COMPAT_12	# NetBSD 1.2 binary compatibility
142#options 	COMPAT_13	# NetBSD 1.3 binary compatibility
143#options 	COMPAT_14	# NetBSD 1.4 binary compatibility
144#options 	COMPAT_M68K4K	# NetBSD/m68k4k binaries
145#options 	COMPAT_SUNOS	# SunOS 4.x binary compatibility; broken
146#options 	COMPAT_SVR4	# SVR4 binary compatibility; broken
147#options 	COMPAT_LINUX	# Linux/m68k binary compatibility
148#options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
149
150## File systems.
151file-system	FFS		# Berkeley Fast Filesystem
152file-system	NFS		# Sun NFS-compatible filesystem client
153#file-system	KERNFS		# kernel data-structure filesystem
154#file-system	NULLFS		# NULL layered filesystem (buggy)
155#file-system 	OVERLAY		# overlay file system
156#file-system	MFS		# memory-based filesystem
157#file-system	FDESC		# user file descriptor filesystem
158#file-system	UMAPFS		# uid/gid remapping filesystem
159#file-system	LFS		# Log-structured filesystem (experimental)
160#file-system	PORTAL		# portal filesystem (experimental)
161#file-system	PROCFS		# /proc
162file-system	CD9660		# ISO 9660 + Rock Ridge file system
163#file-system	UNION		# union file system (a little buggy)
164file-system	MSDOSFS		# MS-DOS FAT filesystem(s).
165#file-system 	ADOSFS		# AmigaDOS filesystem
166
167## File system options.
168#options 	NFSSERVER	# Sun NFS-compatible filesystem server
169#options 	QUOTA		# FFS quotas
170#options 	FFS_EI		# FFS Endian Independent support
171#options 	SOFTDEP         # FFS soft updates support.
172
173## Network protocol support.  In most environments, INET is required.
174options 	INET		# IP (Internet Protocol) v4
175options 	INET6		# IPV6
176#options 	IPSEC		# IP security
177#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
178#options 	IPSEC_DEBUG	# debug for IP security
179#options 	TCP_COMPAT_42	# 4.2BSD IP implementation compatibility
180#options 	GATEWAY		# packet forwarding ("router switch")
181#options 	MROUTING	# packet forwarding of multicast packets
182#options 	DIRECTED_BROADCAST	# allow broadcasts through routers
183#options 	NS		# Xerox NS networking
184#options 	NSIP		# Xerox NS tunneling over IP
185#options 	ISO,TPIP	# OSI networking
186#options 	EON		# OSI tunneling over IP
187#options 	CCITT,LLC,HDLC	# X.25 packet switched protocol
188#options 	NETATALK	# AppleTalk (over Ethernet) protocol
189#options 	NTP		# Network Time Protocol in-kernel support
190#options 	PPS_SYNC	# Add serial line synchronization for NTP
191#options 	PFIL_HOOKS	# Add pfil(9) hooks, intended for custom LKMs.
192#options 	IPFILTER_LOG	# Add ipmon(8) logging for ipfilter device
193#options 	PPP_BSDCOMP	# Add BSD compression to ppp device
194#options 	PPP_DEFLATE	# Add deflate (libz) compression to ppp device
195#options 	PPP_FILTER	# Add active filters for ppp (via bpf)
196
197
198
199#### Device configurations
200
201## Fundamental devices; see also std.x68k
202dmac0	at intio0 addr 0xe84000		# DMA controler
203xel0	at intio0
204opm0	at intio0 addr 0xe90000		# OPM: required for fdc
205
206## Display devices and console
207grfbus0	at mainbus0			# bitmapped displays
208grf0	at grfbus0			# multiplane graphics
209#grf1	at grfbus0			# flexible graphics
210
211kbd0	at mfp0				# standard keyboard
212ite0	at grf0				# internal terminal emulator
213options 	ITE_KERNEL_ATTR=4	# bold for kernel messages
214					# see /sys/arch/x68k/dev/itevar.h
215#pseudo-device	pow		2	# software power switch
216
217## floppy disks
218fdc0	at intio0 addr 0xe94000 intr 96 dma 0 dmaintr 100 # floppy controler
219fd*	at fdc0 unit ?			# builtin floppy drives
220
221## SCSI devices
222scsirom0 at intio0				# SCSI BIOS
223scsirom1 at intio0				# SCSI BIOS
224spc*	at scsirom?				# genuin SCSI
225scsibus* at spc?
226mha0	at scsirom?				# Mankai MK-HA1 (Mach-2)
227scsibus* at mha0
228
229sd*	at scsibus? target ? lun ?	# SCSI disks
230cd*	at scsibus? target ? lun ?	# SCSI CD-ROMs
231st*	at scsibus? target ? lun ?	# SCSI tapes
232#ss*	at scsibus? target ? lun ?	# SCSI scanners
233#ch*	at scsibus? target ? lun ?	# SCSI changer devices
234#uk*	at scsibus? target ? lun ?	# SCSI unknown devices
235
236## Ports
237zsc0	at intio0 addr 0xe98000 intr 112
238zstty0	at zsc0 channel 0		# built-in RS-232C
239#ms0	at zsc0 channel 1		# standard mouse
240#zsc1	at intio0 addr 0xeafc00 intr 113
241#zstty2	at zsc1 channel 0
242#zstty3	at zsc1 channel 1
243#zsc2	at intio0 addr 0xeafc10 intr 114
244#zstty4	at zsc2 channel 0
245#zstty5	at zsc2 channel 1
246#par0	at intio0 addr 0xe8c000 	# Builtin printer port
247
248pseudo-device	sram			# battery-backuped static RAM
249#pseudo-device	bell			# OPM bell
250
251#xcom0	at mainbus0			# NS16550 fast serial
252#xcom1	at mainbus0
253
254## Audio device; broken
255#okiadpcm0 at intio0 addr 0xe92000 intr 106 errintr 107 dma 3
256#audio*	at okiadpcm*
257
258## Network interfaces
259neptune0 at intio0 addr 0xece000 intr 249	# Neptune-X
260neptune1 at intio0 addr 0xece400 intr 249	# Neptune-X at alt. addr.
261ne0	at neptune? addr 0x300			# NE2000 or clone
262#se0	at scsibus? target ? lun ?		# Ether+; broken
263
264
265#### Pseudo devices
266
267## A disk-like interface to files.  Can be used to create floppy, CD,
268## miniroot images, etc.
269
270#pseudo-device	vnd	4
271
272## Concatenated and striped disks; with this, you can create a software-based
273## disk array similar to a "RAID 0" setup.  See ccd(4).
274
275#pseudo-device	ccd	4
276
277## RAIDframe disk driver: software RAID driver.  See raid(4).
278
279#pseudo-device	raid	4
280#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
281
282## Memory disk device, used on boot floppies with compressed
283## kernel-plus-root-disk images.
284
285pseudo-device	md	1
286
287## Loopback network interface; required
288pseudo-device	loop
289
290## SLIP and CSLIP interfaces, for IP over a serial line.
291pseudo-device	sl		1
292
293## PPP, the successor to SLIP.  See pppd(8).
294#pseudo-device	ppp		1
295
296## Network "tunnel" device, allowing protocol stacks to run in the userland.
297## This is used by the third-party user-mode "ppp" program, and others.
298#pseudo-device	tun		4
299
300## Generic L3 over IP tunnel
301#pseudo-device	gre		2	# generic L3 over IP tunnel
302
303## Berkeley Packet Filter, required to run RARPD.  A generic C-language
304## interface that allows selective examining of incoming packets.
305#pseudo-device	bpfilter	8
306
307## IP Filter, used in firewall and NAT applications.  See ipnat(8) for
308## one example of the use of the IP Filter.
309#pseudo-device	ipfilter
310
311## for IPv6
312#pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
313#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
314#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
315
316#### Other device configuration
317
318## Pseudo ttys, required for network logins and programs like screen.
319
320pseudo-device	pty		4	# pseudo-ttys (for network, etc.)
321
322## Random device, used to implement /dev/random (a source of random noise),
323## and generate randomness for some kernel formulae.
324
325#pseudo-device	rnd
326