INSTALL revision 1.73
1 # $NetBSD: INSTALL,v 1.73 2006/02/05 05:02:06 cube Exp $ 2 3 # 4 # INSTALL -- installation kernel. 5 # 6 7 include "arch/x68k/conf/std.x68k" 8 9 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11 #ident "INSTALL-$Revision: 1.73 $" 12 13 makeoptions COPTS="-Os" # Optimise for space. Implies -O2 14 15 maxusers 4 16 17 ## Enable the hooks used for initializing the memory-disk. 18 options MEMORY_DISK_HOOKS 19 options MEMORY_DISK_IS_ROOT # Force root on memory-disk 20 options MEMORY_DISK_SERVER=0 # No user space hooks 21 #options MEMORY_DISK_ROOT_SIZE=2400 # 1.2M, same as a 130mm floppy 22 #options MEMORY_DISK_ROOT_SIZE=2880 # 1.44M, same as a 90mm floppy 23 options MEMORY_DISK_ROOT_SIZE=2550 24 25 ## System kernel configuration. See options(4) for more detail. 26 27 28 ## Options for variants of the m68k MPU 29 ## you must have at least the correct one; REQUIRED 30 options M68030 31 options M68040 32 options M68060 33 ## If you want an optimized kernel for a specific processor, use either: 34 #makeoptions CMACHFLAGS="-m68030" 35 #makeoptions CMACHFLAGS="-m68040 -Wa,-m68030 -Wa,-m68851" 36 #makeoptions CMACHFLAGS="-m68060 -Wa,-m68030 -Wa,-m68851" 37 38 39 #### System options specific to the x68k port 40 41 options EXTENDED_MEMORY # support for >16MB memory 42 options FPU_EMULATE # software fpu emulation for MC68030 43 options FPSP # floating point emulation for MC68040 44 options M060SP # int/fp emulation for MC68060 45 #options JUPITER # support for "Jupiter-X" accelerator 46 #options MAPPEDCOPY # use page mapping for large copyin/copyout 47 #options ZSCONSOLE,ZSCN_SPEED="9600" # use serial console 48 49 50 #### System options that are the same for all ports 51 52 ## Root device configuration: change the ?'s if you are going to use a 53 ## nonstandard root partition (other than where the kernel is booted from) 54 ## and/or nonstandard root type (not ffs or nfs). Normally this can be 55 ## automagically determined at boot time. 56 57 config netbsd root on ? type ? 58 #config netbsd root on sd0 type ffs 59 60 ## RTC is offset from GMT; -540 means JST-9 61 options RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT 62 63 ## System call tracing (see ktrace(1)). 64 #options KTRACE 65 66 ## Collect statistics on kernel malloc's and free's. This does have a 67 ## significant performance hit on slower machines, so it is intended for 68 ## diagnostic use only. 69 #options KMEMSTATS 70 71 ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 72 #options SYSVMSG # System V message queues 73 #options SYSVSEM # System V semaphores 74 #options SYSVSHM # System V shared memory 75 #options SHMMAXPGS=1024 # 1024 pages is the default 76 77 ## Loadable kernel module support 78 #options LKM 79 80 options USERCONF # userconf(4) support 81 options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 82 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 83 options MALLOC_NOINLINE # Not inlining MALLOC saves memory 84 85 ## NFS boot options; not supported currently: needs nfsboot program 86 #options NFS_BOOT_BOOTPARAM 87 #options NFS_BOOT_BOOTP 88 #options NFS_BOOT_DHCP 89 90 #### Debugging options 91 92 ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 93 ## serial console break or keyboard reset, where the PROM would normally 94 ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 95 #options DDB # kernel dynamic debugger 96 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 97 #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 98 #options PANICBUTTON # interrupt switch invokes DDB 99 100 ## You may also use gdb, on another computer connected to this machine over 101 ## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 102 ## KGDB_DEV is a dev_t encoded device number of the serial port to use. 103 ## KGDB is not supported for now. 104 #options KGDB # support for kernel gdb 105 #options KGDB_DEV=0xc00 # kgdb device number 106 #options KGDB_DEVRATE=9600 # baud rate 107 108 ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 109 ## such that gdb(1) can be used on a kernel coredump. 110 111 #makeoptions DEBUG="-g" 112 113 ## Adds code to the kernel that does internal consistency checks, and will 114 ## cause the kernel to panic if corruption of internal data structures 115 ## is detected. 116 #options DIAGNOSTIC # extra kernel sanity checking 117 118 ## Enable (possibly expensive) debugging code that may also display messages 119 ## on the system console 120 #options DEBUG 121 122 ## Make SCSI error messages more verbose when explaining their meanings. 123 #options SCSIVERBOSE 124 125 ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 126 ## This allows writing to /dev/mem, loading kernel modules while multi-user, 127 ## and other insecurities good only for development work. Do not use this 128 ## option on a production machine. 129 #options INSECURE 130 131 ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 132 ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 133 ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 134 ## opaque file mechanism. Perl calls this "secure setuid scripts." 135 136 #options FDSCRIPTS 137 #options SETUIDSCRIPTS 138 139 ## Options for compatibility with previous releases foreign system binaries. 140 141 #options COMPAT_43 # 4.3BSD system interfaces 142 #options COMPAT_09 # NetBSD 0.9 binary compatibility 143 #options COMPAT_10 # NetBSD 1.0 binary compatibility 144 #options COMPAT_11 # NetBSD 1.1 binary compatibility 145 #options COMPAT_12 # NetBSD 1.2 binary compatibility 146 #options COMPAT_13 # NetBSD 1.3 binary compatibility 147 #options COMPAT_14 # NetBSD 1.4 binary compatibility 148 #options COMPAT_15 # NetBSD 1.5 binary compatibility 149 #options COMPAT_16 # NetBSD 1.6 binary compatibility 150 #options COMPAT_20 # NetBSD 2.0 binary compatibility 151 options COMPAT_30 # NetBSD 3.0 compatibility. 152 #options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 153 #options COMPAT_M68K4K # NetBSD/m68k4k binaries 154 #options COMPAT_SUNOS # SunOS 4.x binary compatibility; broken 155 #options COMPAT_SVR4 # SVR4 binary compatibility; broken 156 #options COMPAT_LINUX # Linux/m68k binary compatibility 157 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 158 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 159 160 ## File systems. 161 file-system FFS # Berkeley Fast Filesystem 162 file-system NFS # Sun NFS-compatible filesystem client 163 #file-system KERNFS # kernel data-structure filesystem 164 #file-system NULLFS # NULL layered filesystem (buggy) 165 #file-system OVERLAY # overlay file system 166 #file-system MFS # memory-based filesystem 167 #file-system FDESC # user file descriptor filesystem 168 #file-system UMAPFS # uid/gid remapping filesystem 169 #file-system LFS # Log-structured filesystem (experimental) 170 #file-system PORTAL # portal filesystem (experimental) 171 #file-system PROCFS # /proc 172 file-system CD9660 # ISO 9660 + Rock Ridge file system 173 #file-system UNION # union file system (a little buggy) 174 file-system MSDOSFS # MS-DOS FAT filesystem(s). 175 #file-system ADOSFS # AmigaDOS filesystem 176 #file-system PTYFS # /dev/pts/N support 177 178 ## File system options. 179 #options NFSSERVER # Sun NFS-compatible filesystem server 180 #options QUOTA # FFS quotas 181 #options FFS_EI # FFS Endian Independent support 182 #options SOFTDEP # FFS soft updates support. 183 #options NFS_V2_ONLY # Exclude NFS3 and NQNFS code to save space 184 options FFS_NO_SNAPSHOT # No FFS snapshot support 185 186 ## Network protocol support. In most environments, INET is required. 187 options INET # IP (Internet Protocol) v4 188 options INET6 # IPV6 189 #options IPSEC # IP security 190 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 191 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 192 #options IPSEC_DEBUG # debug for IP security 193 #options GATEWAY # packet forwarding ("router switch") 194 #options MROUTING # packet forwarding of multicast packets 195 #options PIM # Protocol Independent Multicast 196 #options DIRECTED_BROADCAST # allow broadcasts through routers 197 #options NS # Xerox NS networking 198 #options NSIP # Xerox NS tunneling over IP 199 #options ISO,TPIP # OSI networking 200 #options EON # OSI tunneling over IP 201 #options CCITT,LLC,HDLC # X.25 packet switched protocol 202 #options NETATALK # AppleTalk (over Ethernet) protocol 203 #options NTP # Network Time Protocol in-kernel support 204 #options PPS_SYNC # Add serial line synchronization for NTP 205 #options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 206 #options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 207 #options PPP_BSDCOMP # Add BSD compression to ppp device 208 #options PPP_DEFLATE # Add deflate (libz) compression to ppp device 209 #options PPP_FILTER # Add active filters for ppp (via bpf) 210 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 211 212 213 #### Device configurations 214 215 ## Fundamental devices; see also std.x68k 216 dmac0 at intio0 addr 0xe84000 # DMA controller 217 xel0 at intio0 218 opm0 at intio0 addr 0xe90000 # OPM: required for fdc 219 220 ## Display devices and console 221 grfbus0 at mainbus0 # bitmapped displays 222 grf0 at grfbus0 addr 0 # multiplane graphics 223 #grf1 at grfbus0 addr 1 # flexible graphics 224 225 kbd0 at mfp0 # standard keyboard 226 ite0 at grf0 grfaddr 0 # internal terminal emulator 227 options ITE_KERNEL_ATTR=4 # bold for kernel messages 228 # see /sys/arch/x68k/dev/itevar.h 229 #pseudo-device pow 2 # software power switch 230 231 ## floppy disks 232 fdc0 at intio0 addr 0xe94000 intr 96 dma 0 dmaintr 100 # floppy controller 233 fd* at fdc0 unit ? # builtin floppy drives 234 235 ## SCSI devices 236 scsirom0 at intio0 # SCSI BIOS 237 scsirom1 at intio0 # SCSI BIOS 238 spc* at scsirom? # genuin SCSI 239 scsibus* at spc? 240 mha0 at scsirom? # Mankai MK-HA1 (Mach-2) 241 scsibus* at mha0 242 243 sd* at scsibus? target ? lun ? # SCSI disks 244 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 245 st* at scsibus? target ? lun ? # SCSI tapes 246 #ss* at scsibus? target ? lun ? # SCSI scanners 247 #ch* at scsibus? target ? lun ? # SCSI changer devices 248 #uk* at scsibus? target ? lun ? # SCSI unknown devices 249 250 ## Ports 251 zsc0 at intio0 addr 0xe98000 intr 112 252 zstty0 at zsc0 channel 0 # built-in RS-232C 253 #ms0 at zsc0 channel 1 # standard mouse 254 #zsc1 at intio0 addr 0xeafc00 intr 113 255 #zstty2 at zsc1 channel 0 256 #zstty3 at zsc1 channel 1 257 #zsc2 at intio0 addr 0xeafc10 intr 114 258 #zstty4 at zsc2 channel 0 259 #zstty5 at zsc2 channel 1 260 #par0 at intio0 addr 0xe8c000 # Builtin printer port 261 262 pseudo-device sram # battery-backuped static RAM 263 #pseudo-device bell # OPM bell 264 265 #xcom0 at mainbus0 # NS16550 fast serial 266 #xcom1 at mainbus0 267 268 ## Audio device 269 #vs0 at intio0 addr 0xe92000 dma 3 dmaintr 106 270 #audio* at vs? 271 272 ## Network interfaces 273 ne* at intio0 addr 0xece300 intr 249 # Nereid Ethernet 274 ne* at intio0 addr 0xeceb00 intr 248 # Nereid Ethernet 275 neptune0 at intio0 addr 0xece000 intr 249 # Neptune-X 276 neptune1 at intio0 addr 0xece400 intr 249 # Neptune-X at alt. addr. 277 ne* at neptune? addr 0x300 # NE2000 or clone 278 279 280 #### Pseudo devices 281 282 pseudo-device md 1 # boot floppy image 283 pseudo-device loop 284 pseudo-device sl 285 pseudo-device pty 2 # pseudo-terminals (Sysinst needs two) 286 pseudo-device rnd 287
Indexes created Thu Oct 16 14:10:15 GMT 2025