Home | History | Annotate | Line # | Download | only in pci
ichlpcib.c revision 1.61
      1  1.61  riastrad /*	$NetBSD: ichlpcib.c,v 1.61 2023/05/09 23:11:09 riastradh Exp $	*/
      2   1.1   xtraeme 
      3   1.1   xtraeme /*-
      4   1.1   xtraeme  * Copyright (c) 2004 The NetBSD Foundation, Inc.
      5   1.1   xtraeme  * All rights reserved.
      6   1.1   xtraeme  *
      7   1.1   xtraeme  * This code is derived from software contributed to The NetBSD Foundation
      8   1.1   xtraeme  * by Minoura Makoto and Matthew R. Green.
      9   1.1   xtraeme  *
     10   1.1   xtraeme  * Redistribution and use in source and binary forms, with or without
     11   1.1   xtraeme  * modification, are permitted provided that the following conditions
     12   1.1   xtraeme  * are met:
     13   1.1   xtraeme  * 1. Redistributions of source code must retain the above copyright
     14   1.1   xtraeme  *    notice, this list of conditions and the following disclaimer.
     15   1.1   xtraeme  * 2. Redistributions in binary form must reproduce the above copyright
     16   1.1   xtraeme  *    notice, this list of conditions and the following disclaimer in the
     17   1.1   xtraeme  *    documentation and/or other materials provided with the distribution.
     18   1.1   xtraeme  *
     19   1.1   xtraeme  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     20   1.1   xtraeme  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     21   1.1   xtraeme  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     22   1.1   xtraeme  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     23   1.1   xtraeme  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     24   1.1   xtraeme  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     25   1.1   xtraeme  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     26   1.1   xtraeme  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     27   1.1   xtraeme  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     28   1.1   xtraeme  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     29   1.1   xtraeme  * POSSIBILITY OF SUCH DAMAGE.
     30   1.1   xtraeme  */
     31   1.1   xtraeme 
     32   1.1   xtraeme /*
     33   1.1   xtraeme  * Intel I/O Controller Hub (ICHn) LPC Interface Bridge driver
     34   1.1   xtraeme  *
     35   1.1   xtraeme  *  LPC Interface Bridge is basically a pcib (PCI-ISA Bridge), but has
     36   1.1   xtraeme  *  some power management and monitoring functions.
     37  1.49  pgoyette  *  Currently we support the watchdog timer, SpeedStep (on some systems),
     38  1.49  pgoyette  *  the gpio interface, hpet timer, hardware random number generator,
     39   1.1   xtraeme  *  and the power management timer.
     40   1.1   xtraeme  */
     41   1.1   xtraeme 
     42   1.1   xtraeme #include <sys/cdefs.h>
     43  1.61  riastrad __KERNEL_RCSID(0, "$NetBSD: ichlpcib.c,v 1.61 2023/05/09 23:11:09 riastradh Exp $");
     44   1.1   xtraeme 
     45   1.1   xtraeme #include <sys/types.h>
     46   1.1   xtraeme #include <sys/param.h>
     47   1.1   xtraeme #include <sys/systm.h>
     48   1.1   xtraeme #include <sys/device.h>
     49   1.1   xtraeme #include <sys/sysctl.h>
     50   1.6  jmcneill #include <sys/timetc.h>
     51  1.20  jakllsch #include <sys/gpio.h>
     52  1.32    dyoung #include <sys/bus.h>
     53   1.1   xtraeme 
     54   1.1   xtraeme #include <dev/pci/pcivar.h>
     55   1.1   xtraeme #include <dev/pci/pcireg.h>
     56   1.1   xtraeme #include <dev/pci/pcidevs.h>
     57   1.1   xtraeme 
     58  1.20  jakllsch #include <dev/gpio/gpiovar.h>
     59   1.1   xtraeme 
     60   1.6  jmcneill #include <dev/ic/acpipmtimer.h>
     61   1.1   xtraeme #include <dev/ic/i82801lpcreg.h>
     62  1.31    jruoho #include <dev/ic/i82801lpcvar.h>
     63   1.6  jmcneill #include <dev/ic/hpetreg.h>
     64   1.6  jmcneill #include <dev/ic/hpetvar.h>
     65   1.6  jmcneill 
     66  1.49  pgoyette #include <arch/x86/pci/tco.h>
     67  1.49  pgoyette 
     68  1.12    martin #include "pcibvar.h"
     69  1.20  jakllsch #include "gpio.h"
     70  1.25  jakllsch #include "fwhrng.h"
     71  1.20  jakllsch 
     72  1.20  jakllsch #define LPCIB_GPIO_NPINS 64
     73   1.1   xtraeme 
     74   1.1   xtraeme struct lpcib_softc {
     75  1.12    martin 	/* we call pcibattach() which assumes this starts like this: */
     76  1.12    martin 	struct pcib_softc	sc_pcib;
     77   1.1   xtraeme 
     78   1.6  jmcneill 	struct pci_attach_args	sc_pa;
     79   1.6  jmcneill 	int			sc_has_rcba;
     80   1.6  jmcneill 	int			sc_has_ich5_hpet;
     81   1.6  jmcneill 
     82   1.6  jmcneill 	/* RCBA */
     83   1.6  jmcneill 	bus_space_tag_t		sc_rcbat;
     84   1.6  jmcneill 	bus_space_handle_t	sc_rcbah;
     85   1.6  jmcneill 	pcireg_t		sc_rcba_reg;
     86   1.6  jmcneill 
     87  1.49  pgoyette 	/* Power management variables. */
     88  1.58  riastrad 	bus_space_tag_t		sc_pmt;
     89  1.58  riastrad 	bus_space_handle_t	sc_pmh;
     90  1.19    dyoung 	bus_size_t		sc_iosize;
     91   1.6  jmcneill 
     92  1.59  riastrad 	/* TCO variables. */
     93  1.59  riastrad 	bus_space_tag_t		sc_tcot;
     94  1.59  riastrad 	bus_space_handle_t	sc_tcoh;
     95  1.59  riastrad 	bus_size_t		sc_tcosz;
     96  1.59  riastrad 
     97   1.6  jmcneill 	/* HPET variables. */
     98   1.6  jmcneill 	uint32_t		sc_hpet_reg;
     99   1.6  jmcneill 
    100  1.20  jakllsch #if NGPIO > 0
    101  1.20  jakllsch 	device_t		sc_gpiobus;
    102  1.20  jakllsch 	kmutex_t		sc_gpio_mtx;
    103  1.20  jakllsch 	bus_space_tag_t		sc_gpio_iot;
    104  1.20  jakllsch 	bus_space_handle_t	sc_gpio_ioh;
    105  1.20  jakllsch 	bus_size_t		sc_gpio_ios;
    106  1.20  jakllsch 	struct gpio_chipset_tag	sc_gpio_gc;
    107  1.20  jakllsch 	gpio_pin_t		sc_gpio_pins[LPCIB_GPIO_NPINS];
    108  1.20  jakllsch #endif
    109  1.20  jakllsch 
    110  1.25  jakllsch #if NFWHRNG > 0
    111  1.25  jakllsch 	device_t		sc_fwhbus;
    112  1.25  jakllsch #endif
    113  1.25  jakllsch 
    114  1.16     joerg 	/* Speedstep */
    115  1.16     joerg 	pcireg_t		sc_pmcon_orig;
    116  1.16     joerg 
    117   1.1   xtraeme 	/* Power management */
    118   1.7  drochner 	pcireg_t		sc_pirq[2];
    119   1.6  jmcneill 	pcireg_t		sc_pmcon;
    120   1.6  jmcneill 	pcireg_t		sc_fwhsel2;
    121  1.19    dyoung 
    122  1.19    dyoung 	/* Child devices */
    123  1.49  pgoyette 	device_t		sc_tco;
    124  1.19    dyoung 	device_t		sc_hpetbus;
    125  1.19    dyoung 	acpipmtimer_t		sc_pmtimer;
    126  1.19    dyoung 	pcireg_t		sc_acpi_cntl;
    127  1.19    dyoung 
    128  1.19    dyoung 	struct sysctllog	*sc_log;
    129   1.1   xtraeme };
    130   1.1   xtraeme 
    131   1.9   xtraeme static int lpcibmatch(device_t, cfdata_t, void *);
    132   1.9   xtraeme static void lpcibattach(device_t, device_t, void *);
    133  1.19    dyoung static int lpcibdetach(device_t, int);
    134  1.19    dyoung static void lpcibchilddet(device_t, device_t);
    135  1.19    dyoung static int lpcibrescan(device_t, const char *, const int *);
    136  1.24    dyoung static bool lpcib_suspend(device_t, const pmf_qual_t *);
    137  1.24    dyoung static bool lpcib_resume(device_t, const pmf_qual_t *);
    138  1.16     joerg static bool lpcib_shutdown(device_t, int);
    139   1.1   xtraeme 
    140   1.9   xtraeme static void pmtimer_configure(device_t);
    141  1.61  riastrad static void pmtimer_unconfigure(device_t, int);
    142   1.1   xtraeme 
    143   1.9   xtraeme static void tcotimer_configure(device_t);
    144   1.1   xtraeme 
    145   1.9   xtraeme static void speedstep_configure(device_t);
    146  1.19    dyoung static void speedstep_unconfigure(device_t);
    147   1.1   xtraeme static int speedstep_sysctl_helper(SYSCTLFN_ARGS);
    148   1.1   xtraeme 
    149   1.9   xtraeme static void lpcib_hpet_configure(device_t);
    150   1.6  jmcneill 
    151  1.20  jakllsch #if NGPIO > 0
    152  1.20  jakllsch static void lpcib_gpio_configure(device_t);
    153  1.61  riastrad static void lpcib_gpio_unconfigure(device_t);
    154  1.20  jakllsch static int lpcib_gpio_pin_read(void *, int);
    155  1.20  jakllsch static void lpcib_gpio_pin_write(void *, int, int);
    156  1.20  jakllsch static void lpcib_gpio_pin_ctl(void *, int, int);
    157  1.20  jakllsch #endif
    158  1.20  jakllsch 
    159  1.25  jakllsch #if NFWHRNG > 0
    160  1.25  jakllsch static void lpcib_fwh_configure(device_t);
    161  1.25  jakllsch #endif
    162  1.25  jakllsch 
    163   1.1   xtraeme struct lpcib_softc *speedstep_cookie;	/* XXX */
    164   1.1   xtraeme 
    165  1.19    dyoung CFATTACH_DECL2_NEW(ichlpcib, sizeof(struct lpcib_softc),
    166  1.19    dyoung     lpcibmatch, lpcibattach, lpcibdetach, NULL, lpcibrescan, lpcibchilddet);
    167   1.1   xtraeme 
    168  1.52      maxv static const struct lpcib_device {
    169   1.6  jmcneill 	pcireg_t vendor, product;
    170   1.6  jmcneill 	int has_rcba;
    171   1.6  jmcneill 	int has_ich5_hpet;
    172   1.6  jmcneill } lpcib_devices[] = {
    173  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_3400_LPC, 1, 0 },
    174  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_3420_LPC, 1, 0 },
    175  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_3450_LPC, 1, 0 },
    176  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_6300ESB_LPC, 1, 0 },
    177  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_63XXESB_LPC, 1, 0 },
    178   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801AA_LPC, 0, 0 },
    179  1.27  jakllsch 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801AB_LPC, 0, 0 },
    180   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801BA_LPC, 0, 0 },
    181   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801BAM_LPC, 0, 0 },
    182   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801CA_LPC, 0, 0 },
    183   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801CAM_LPC, 0, 0 },
    184   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801DB_LPC, 0, 0 },
    185  1.30   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801DBM_LPC, 0, 0 },
    186  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801E_LPC, 0, 1 },
    187   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801EB_LPC, 0, 1 },
    188   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801FB_LPC, 1, 0 },
    189   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801FBM_LPC, 1, 0 },
    190   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801G_LPC, 1, 0 },
    191   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801GBM_LPC, 1, 0 },
    192  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801GH_LPC, 1, 0 },
    193   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801GHM_LPC, 1, 0 },
    194   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_LPC, 1, 0 },
    195   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HEM_LPC, 1, 0 },
    196   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HH_LPC, 1, 0 },
    197   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HO_LPC, 1, 0 },
    198   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_LPC, 1, 0 },
    199  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IB_LPC, 1, 0 },
    200   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IH_LPC, 1, 0 },
    201  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IM_LPC, 1, 0 },
    202   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IO_LPC, 1, 0 },
    203   1.6  jmcneill 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IR_LPC, 1, 0 },
    204  1.17     njoly 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801IEM_LPC, 1, 0 },
    205  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801JD_LPC, 1, 0 },
    206  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801JDO_LPC, 1, 0 },
    207  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801JIB_LPC, 1, 0 },
    208  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801JIR_LPC, 1, 0 },
    209  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C202_LPC, 1, 0 },
    210  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C204_LPC, 1, 0 },
    211  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C206_LPC, 1, 0 },
    212  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C216_LPC, 1, 0 },
    213  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_NM10_LPC, 1, 0 },
    214  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_H55_LPC, 1, 0 },
    215  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_H57_LPC, 1, 0 },
    216  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_HM55_LPC, 1, 0 },
    217  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_HM57_LPC, 1, 0 },
    218  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_P55_LPC, 1, 0 },
    219  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_PM55_LPC, 1, 0 },
    220  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Q57_LPC, 1, 0 },
    221  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_QM57_LPC, 1, 0 },
    222  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_QS57_LPC, 1, 0 },
    223  1.36   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_B65_LPC, 1, 0 },
    224  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_H61_LPC, 1, 0 },
    225  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_H67_LPC, 1, 0 },
    226  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_HM65_LPC, 1, 0 },
    227  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_HM67_LPC, 1, 0 },
    228  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_P67_LPC, 1, 0 },
    229  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Q65_LPC, 1, 0 },
    230  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Q67_LPC, 1, 0 },
    231  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_QM67_LPC, 1, 0 },
    232  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_QS67_LPC, 1, 0 },
    233  1.35   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_UM67_LPC, 1, 0 },
    234  1.43   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Z68_LPC, 1, 0 },
    235  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_B75_LPC, 1, 0 },
    236  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_H77_LPC, 1, 0 },
    237  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_MOBILE_HM70_LPC, 1, 0 },
    238  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_MOBILE_HM75_LPC, 1, 0 },
    239  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_MOBILE_HM76_LPC, 1, 0 },
    240  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_MOBILE_HM77_LPC, 1, 0 },
    241  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_MOBILE_QM77_LPC, 1, 0 },
    242  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_MOBILE_QS77_LPC, 1, 0 },
    243  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_MOBILE_UM77_LPC, 1, 0 },
    244  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_NM70_LPC, 1, 0 },
    245  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Q75_LPC, 1, 0 },
    246  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Q77_LPC, 1, 0 },
    247  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Z75_LPC, 1, 0 },
    248  1.37   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Z77_LPC, 1, 0 },
    249  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Z87_LPC, 1, 0 },
    250  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Z85_LPC, 1, 0 },
    251  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_HM86_LPC, 1, 0 },
    252  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_H87_LPC, 1, 0 },
    253  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_HM87_LPC, 1, 0 },
    254  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Q85_LPC, 1, 0 },
    255  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Q87_LPC, 1, 0 },
    256  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_QM87_LPC, 1, 0 },
    257  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_B85_LPC, 1, 0 },
    258  1.47   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_H97_LPC, 1, 0 },
    259  1.47   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_Z97_LPC, 1, 0 },
    260  1.48   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_X99_LPC, 1, 0 },
    261  1.48   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_X99_LPC_2, 1, 0 },
    262  1.50   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_CORE5G_M_LPC_4, 1, 0 },
    263  1.50   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_CORE5G_M_LPC_7, 1, 0 },
    264  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C222_LPC, 1, 0 },
    265  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C224_LPC, 1, 0 },
    266  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C226_LPC, 1, 0 },
    267  1.39   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_H81_LPC, 1, 0 },
    268  1.38  riastrad 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C600_LPC, 1, 0 },
    269  1.44   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_DH89XXCC_LPC, 1, 0 },
    270  1.44   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_DH89XXCL_LPC, 1, 0 },
    271  1.42   msaitoh #if 0
    272  1.41   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C2000_PCU_1, 1, 0 },
    273  1.41   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C2000_PCU_2, 1, 0 },
    274  1.41   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C2000_PCU_3, 1, 0 },
    275  1.41   msaitoh 	{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_C2000_PCU_4, 1, 0 },
    276  1.42   msaitoh #endif
    277  1.14     joerg 
    278   1.6  jmcneill 	{ 0, 0, 0, 0 },
    279   1.6  jmcneill };
    280   1.6  jmcneill 
    281   1.1   xtraeme /*
    282  1.51  jakllsch  * Allow user to enable GPIO functionality if they really need it.  The
    283  1.51  jakllsch  * vast majority of systems with an ICH should not expose GPIO to the
    284  1.51  jakllsch  * kernel or user.  In at least one instance the gpio_resume() handler
    285  1.51  jakllsch  * on ICH GPIO was found to sabotage S3 suspend/resume.
    286  1.51  jakllsch  */
    287  1.51  jakllsch int	ichlpcib_gpio_disable = 1;
    288  1.51  jakllsch 
    289  1.51  jakllsch /*
    290   1.1   xtraeme  * Autoconf callbacks.
    291   1.1   xtraeme  */
    292   1.1   xtraeme static int
    293   1.9   xtraeme lpcibmatch(device_t parent, cfdata_t match, void *aux)
    294   1.1   xtraeme {
    295   1.1   xtraeme 	struct pci_attach_args *pa = aux;
    296  1.52      maxv 	const struct lpcib_device *lpcib_dev;
    297   1.1   xtraeme 
    298   1.1   xtraeme 	/* We are ISA bridge, of course */
    299   1.1   xtraeme 	if (PCI_CLASS(pa->pa_class) != PCI_CLASS_BRIDGE ||
    300   1.1   xtraeme 	    PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_BRIDGE_ISA)
    301   1.1   xtraeme 		return 0;
    302   1.1   xtraeme 
    303   1.6  jmcneill 	for (lpcib_dev = lpcib_devices; lpcib_dev->vendor; ++lpcib_dev) {
    304   1.6  jmcneill 		if (PCI_VENDOR(pa->pa_id) == lpcib_dev->vendor &&
    305   1.6  jmcneill 		    PCI_PRODUCT(pa->pa_id) == lpcib_dev->product)
    306   1.1   xtraeme 			return 10;
    307   1.1   xtraeme 	}
    308   1.1   xtraeme 
    309   1.1   xtraeme 	return 0;
    310   1.1   xtraeme }
    311   1.1   xtraeme 
    312   1.1   xtraeme static void
    313   1.9   xtraeme lpcibattach(device_t parent, device_t self, void *aux)
    314   1.1   xtraeme {
    315   1.1   xtraeme 	struct pci_attach_args *pa = aux;
    316   1.6  jmcneill 	struct lpcib_softc *sc = device_private(self);
    317  1.52      maxv 	const struct lpcib_device *lpcib_dev;
    318  1.46   msaitoh 	pcireg_t pmbase;
    319   1.1   xtraeme 
    320   1.6  jmcneill 	sc->sc_pa = *pa;
    321   1.6  jmcneill 
    322   1.6  jmcneill 	for (lpcib_dev = lpcib_devices; lpcib_dev->vendor; ++lpcib_dev) {
    323   1.6  jmcneill 		if (PCI_VENDOR(pa->pa_id) != lpcib_dev->vendor ||
    324   1.6  jmcneill 		    PCI_PRODUCT(pa->pa_id) != lpcib_dev->product)
    325   1.6  jmcneill 			continue;
    326   1.6  jmcneill 		sc->sc_has_rcba = lpcib_dev->has_rcba;
    327   1.6  jmcneill 		sc->sc_has_ich5_hpet = lpcib_dev->has_ich5_hpet;
    328   1.6  jmcneill 		break;
    329   1.6  jmcneill 	}
    330   1.1   xtraeme 
    331   1.1   xtraeme 	pcibattach(parent, self, aux);
    332   1.1   xtraeme 
    333   1.1   xtraeme 	/*
    334   1.1   xtraeme 	 * Part of our I/O registers are used as ACPI PM regs.
    335   1.1   xtraeme 	 * Since our ACPI subsystem accesses the I/O space directly so far,
    336   1.1   xtraeme 	 * we do not have to bother bus_space I/O map confliction.
    337  1.45   msaitoh 	 *
    338  1.45   msaitoh 	 * The PMBASE register is alike PCI BAR but not completely compatible
    339  1.45   msaitoh 	 * with it. The PMBASE define the base address and the type but
    340  1.46   msaitoh 	 * not describe the size. The value of the register may be lower
    341  1.46   msaitoh 	 * than LPCIB_PCI_PM_SIZE. It makes impossible to use
    342  1.46   msaitoh 	 * pci_mapreg_submap() because the function does range check.
    343   1.1   xtraeme 	 */
    344  1.58  riastrad 	sc->sc_pmt = pa->pa_iot;
    345  1.46   msaitoh 	pmbase = pci_conf_read(pa->pa_pc, pa->pa_tag, LPCIB_PCI_PMBASE);
    346  1.58  riastrad 	if (bus_space_map(sc->sc_pmt, PCI_MAPREG_IO_ADDR(pmbase),
    347  1.60  riastrad 		LPCIB_PCI_PM_SIZE, 0, &sc->sc_pmh) != 0) {
    348  1.46   msaitoh 		aprint_error_dev(self,
    349  1.60  riastrad 		    "can't map power management i/o space\n");
    350   1.1   xtraeme 		return;
    351   1.1   xtraeme 	}
    352   1.1   xtraeme 
    353  1.59  riastrad 	if (bus_space_subregion(sc->sc_pmt, sc->sc_pmh, PMC_TCO_BASE,
    354  1.59  riastrad 		TCO_REGSIZE, &sc->sc_tcoh)) {
    355  1.59  riastrad 		aprint_error_dev(self, "can't map TCO space\n");
    356  1.59  riastrad 	} else {
    357  1.59  riastrad 		sc->sc_tcot = sc->sc_pmt;
    358  1.59  riastrad 	}
    359  1.59  riastrad 
    360  1.16     joerg 	sc->sc_pmcon_orig = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    361  1.16     joerg 	    LPCIB_PCI_GEN_PMCON_1);
    362  1.16     joerg 
    363   1.6  jmcneill 	/* For ICH6 and later, always enable RCBA */
    364   1.6  jmcneill 	if (sc->sc_has_rcba) {
    365   1.6  jmcneill 		pcireg_t rcba;
    366   1.6  jmcneill 
    367   1.6  jmcneill 		sc->sc_rcbat = sc->sc_pa.pa_memt;
    368   1.6  jmcneill 
    369  1.12    martin 		rcba = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    370  1.60  riastrad 		    LPCIB_RCBA);
    371   1.6  jmcneill 		if ((rcba & LPCIB_RCBA_EN) == 0) {
    372  1.40  jakllsch 			aprint_error_dev(self, "RCBA is not enabled\n");
    373   1.6  jmcneill 			return;
    374   1.6  jmcneill 		}
    375   1.6  jmcneill 		rcba &= ~LPCIB_RCBA_EN;
    376   1.6  jmcneill 
    377   1.6  jmcneill 		if (bus_space_map(sc->sc_rcbat, rcba, LPCIB_RCBA_SIZE, 0,
    378  1.60  riastrad 			&sc->sc_rcbah)) {
    379  1.40  jakllsch 			aprint_error_dev(self, "RCBA could not be mapped\n");
    380   1.6  jmcneill 			return;
    381   1.6  jmcneill 		}
    382   1.6  jmcneill 	}
    383   1.6  jmcneill 
    384   1.1   xtraeme 	/* Set up the power management timer. */
    385   1.9   xtraeme 	pmtimer_configure(self);
    386   1.1   xtraeme 
    387   1.1   xtraeme 	/* Set up the TCO (watchdog). */
    388   1.9   xtraeme 	tcotimer_configure(self);
    389   1.1   xtraeme 
    390   1.1   xtraeme 	/* Set up SpeedStep. */
    391   1.9   xtraeme 	speedstep_configure(self);
    392   1.1   xtraeme 
    393   1.6  jmcneill 	/* Set up HPET. */
    394   1.9   xtraeme 	lpcib_hpet_configure(self);
    395   1.6  jmcneill 
    396  1.20  jakllsch #if NGPIO > 0
    397  1.20  jakllsch 	/* Set up GPIO */
    398  1.20  jakllsch 	lpcib_gpio_configure(self);
    399  1.20  jakllsch #endif
    400  1.20  jakllsch 
    401  1.25  jakllsch #if NFWHRNG > 0
    402  1.25  jakllsch 	lpcib_fwh_configure(self);
    403  1.25  jakllsch #endif
    404  1.25  jakllsch 
    405   1.6  jmcneill 	/* Install power handler */
    406  1.16     joerg 	if (!pmf_device_register1(self, lpcib_suspend, lpcib_resume,
    407  1.60  riastrad 		lpcib_shutdown))
    408   1.6  jmcneill 		aprint_error_dev(self, "couldn't establish power handler\n");
    409   1.6  jmcneill }
    410   1.6  jmcneill 
    411  1.19    dyoung static void
    412  1.19    dyoung lpcibchilddet(device_t self, device_t child)
    413  1.19    dyoung {
    414  1.19    dyoung 	struct lpcib_softc *sc = device_private(self);
    415  1.19    dyoung 	uint32_t val;
    416  1.19    dyoung 
    417  1.25  jakllsch #if NFWHRNG > 0
    418  1.25  jakllsch 	if (sc->sc_fwhbus == child) {
    419  1.25  jakllsch 		sc->sc_fwhbus = NULL;
    420  1.25  jakllsch 		return;
    421  1.25  jakllsch 	}
    422  1.25  jakllsch #endif
    423  1.21  jakllsch #if NGPIO > 0
    424  1.20  jakllsch 	if (sc->sc_gpiobus == child) {
    425  1.20  jakllsch 		sc->sc_gpiobus = NULL;
    426  1.20  jakllsch 		return;
    427  1.20  jakllsch 	}
    428  1.21  jakllsch #endif
    429  1.49  pgoyette 	if (sc->sc_tco == child) {
    430  1.49  pgoyette 		sc->sc_tco = NULL;
    431  1.49  pgoyette 		return;
    432  1.49  pgoyette 	}
    433  1.49  pgoyette 
    434  1.19    dyoung 	if (sc->sc_hpetbus != child) {
    435  1.19    dyoung 		pcibchilddet(self, child);
    436  1.19    dyoung 		return;
    437  1.19    dyoung 	}
    438  1.19    dyoung 	sc->sc_hpetbus = NULL;
    439  1.19    dyoung 	if (sc->sc_has_ich5_hpet) {
    440  1.19    dyoung 		val = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    441  1.19    dyoung 		    LPCIB_PCI_GEN_CNTL);
    442  1.19    dyoung 		switch (val & LPCIB_ICH5_HPTC_WIN_MASK) {
    443  1.19    dyoung 		case LPCIB_ICH5_HPTC_0000:
    444  1.19    dyoung 		case LPCIB_ICH5_HPTC_1000:
    445  1.19    dyoung 		case LPCIB_ICH5_HPTC_2000:
    446  1.19    dyoung 		case LPCIB_ICH5_HPTC_3000:
    447  1.19    dyoung 			break;
    448  1.19    dyoung 		default:
    449  1.19    dyoung 			return;
    450  1.19    dyoung 		}
    451  1.19    dyoung 		val &= ~LPCIB_ICH5_HPTC_EN;
    452  1.19    dyoung 		pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    453  1.19    dyoung 		    LPCIB_PCI_GEN_CNTL, val);
    454  1.19    dyoung 	} else if (sc->sc_has_rcba) {
    455  1.19    dyoung 		val = bus_space_read_4(sc->sc_rcbat, sc->sc_rcbah,
    456  1.19    dyoung 		    LPCIB_RCBA_HPTC);
    457  1.19    dyoung 		switch (val & LPCIB_RCBA_HPTC_WIN_MASK) {
    458  1.19    dyoung 		case LPCIB_RCBA_HPTC_0000:
    459  1.19    dyoung 		case LPCIB_RCBA_HPTC_1000:
    460  1.19    dyoung 		case LPCIB_RCBA_HPTC_2000:
    461  1.19    dyoung 		case LPCIB_RCBA_HPTC_3000:
    462  1.19    dyoung 			break;
    463  1.19    dyoung 		default:
    464  1.19    dyoung 			return;
    465  1.19    dyoung 		}
    466  1.19    dyoung 		val &= ~LPCIB_RCBA_HPTC_EN;
    467  1.19    dyoung 		bus_space_write_4(sc->sc_rcbat, sc->sc_rcbah, LPCIB_RCBA_HPTC,
    468  1.19    dyoung 		    val);
    469  1.19    dyoung 	}
    470  1.19    dyoung }
    471  1.19    dyoung 
    472  1.19    dyoung static int
    473  1.19    dyoung lpcibrescan(device_t self, const char *ifattr, const int *locators)
    474  1.19    dyoung {
    475  1.19    dyoung 	struct lpcib_softc *sc = device_private(self);
    476  1.19    dyoung 
    477  1.60  riastrad 	if (ifattr_match(ifattr, "tcoichbus") && sc->sc_tco == NULL)
    478  1.49  pgoyette 		tcotimer_configure(self);
    479  1.49  pgoyette 
    480  1.25  jakllsch #if NFWHRNG > 0
    481  1.25  jakllsch 	if (ifattr_match(ifattr, "fwhichbus") && sc->sc_fwhbus == NULL)
    482  1.25  jakllsch 		lpcib_fwh_configure(self);
    483  1.25  jakllsch #endif
    484  1.25  jakllsch 
    485  1.19    dyoung 	if (ifattr_match(ifattr, "hpetichbus") && sc->sc_hpetbus == NULL)
    486  1.19    dyoung 		lpcib_hpet_configure(self);
    487  1.19    dyoung 
    488  1.20  jakllsch #if NGPIO > 0
    489  1.20  jakllsch 	if (ifattr_match(ifattr, "gpiobus") && sc->sc_gpiobus == NULL)
    490  1.20  jakllsch 		lpcib_gpio_configure(self);
    491  1.20  jakllsch #endif
    492  1.20  jakllsch 
    493  1.19    dyoung 	return pcibrescan(self, ifattr, locators);
    494  1.19    dyoung }
    495  1.19    dyoung 
    496  1.19    dyoung static int
    497  1.19    dyoung lpcibdetach(device_t self, int flags)
    498  1.19    dyoung {
    499  1.19    dyoung 	struct lpcib_softc *sc = device_private(self);
    500  1.61  riastrad 	int error;
    501  1.61  riastrad 
    502  1.61  riastrad 	error = config_detach_children(self, flags);
    503  1.61  riastrad 	if (error)
    504  1.61  riastrad 		return error;
    505  1.19    dyoung 
    506  1.19    dyoung 	pmf_device_deregister(self);
    507  1.19    dyoung 
    508  1.20  jakllsch #if NGPIO > 0
    509  1.61  riastrad 	lpcib_gpio_unconfigure(self);
    510  1.20  jakllsch #endif
    511  1.20  jakllsch 
    512  1.19    dyoung 	/* Set up SpeedStep. */
    513  1.19    dyoung 	speedstep_unconfigure(self);
    514  1.19    dyoung 
    515  1.61  riastrad 	pmtimer_unconfigure(self, flags);
    516  1.19    dyoung 
    517  1.19    dyoung 	if (sc->sc_has_rcba)
    518  1.19    dyoung 		bus_space_unmap(sc->sc_rcbat, sc->sc_rcbah, LPCIB_RCBA_SIZE);
    519  1.19    dyoung 
    520  1.58  riastrad 	bus_space_unmap(sc->sc_pmt, sc->sc_pmh, sc->sc_iosize);
    521  1.19    dyoung 
    522  1.61  riastrad 	error = pcibdetach(self, flags);
    523  1.61  riastrad 	KASSERTMSG(error == 0, "error=%d", error);
    524  1.61  riastrad 
    525  1.61  riastrad 	return 0;
    526  1.19    dyoung }
    527  1.19    dyoung 
    528   1.6  jmcneill static bool
    529  1.16     joerg lpcib_shutdown(device_t dv, int howto)
    530  1.16     joerg {
    531  1.16     joerg 	struct lpcib_softc *sc = device_private(dv);
    532  1.16     joerg 
    533  1.16     joerg 	pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    534  1.16     joerg 	    LPCIB_PCI_GEN_PMCON_1, sc->sc_pmcon_orig);
    535  1.16     joerg 
    536  1.16     joerg 	return true;
    537  1.16     joerg }
    538  1.16     joerg 
    539  1.16     joerg static bool
    540  1.24    dyoung lpcib_suspend(device_t dv, const pmf_qual_t *qual)
    541   1.6  jmcneill {
    542   1.6  jmcneill 	struct lpcib_softc *sc = device_private(dv);
    543  1.12    martin 	pci_chipset_tag_t pc = sc->sc_pcib.sc_pc;
    544  1.12    martin 	pcitag_t tag = sc->sc_pcib.sc_tag;
    545   1.6  jmcneill 
    546   1.6  jmcneill 	/* capture PIRQ routing control registers */
    547   1.6  jmcneill 	sc->sc_pirq[0] = pci_conf_read(pc, tag, LPCIB_PCI_PIRQA_ROUT);
    548   1.7  drochner 	sc->sc_pirq[1] = pci_conf_read(pc, tag, LPCIB_PCI_PIRQE_ROUT);
    549   1.6  jmcneill 
    550   1.6  jmcneill 	sc->sc_pmcon = pci_conf_read(pc, tag, LPCIB_PCI_GEN_PMCON_1);
    551   1.6  jmcneill 	sc->sc_fwhsel2 = pci_conf_read(pc, tag, LPCIB_PCI_GEN_STA);
    552   1.6  jmcneill 
    553   1.6  jmcneill 	if (sc->sc_has_rcba) {
    554   1.6  jmcneill 		sc->sc_rcba_reg = pci_conf_read(pc, tag, LPCIB_RCBA);
    555   1.6  jmcneill 		sc->sc_hpet_reg = bus_space_read_4(sc->sc_rcbat, sc->sc_rcbah,
    556   1.6  jmcneill 		    LPCIB_RCBA_HPTC);
    557   1.6  jmcneill 	} else if (sc->sc_has_ich5_hpet) {
    558   1.6  jmcneill 		sc->sc_hpet_reg = pci_conf_read(pc, tag, LPCIB_PCI_GEN_CNTL);
    559   1.6  jmcneill 	}
    560   1.6  jmcneill 
    561   1.6  jmcneill 	return true;
    562   1.6  jmcneill }
    563   1.6  jmcneill 
    564   1.6  jmcneill static bool
    565  1.24    dyoung lpcib_resume(device_t dv, const pmf_qual_t *qual)
    566   1.6  jmcneill {
    567   1.6  jmcneill 	struct lpcib_softc *sc = device_private(dv);
    568  1.12    martin 	pci_chipset_tag_t pc = sc->sc_pcib.sc_pc;
    569  1.12    martin 	pcitag_t tag = sc->sc_pcib.sc_tag;
    570   1.6  jmcneill 
    571   1.6  jmcneill 	/* restore PIRQ routing control registers */
    572   1.6  jmcneill 	pci_conf_write(pc, tag, LPCIB_PCI_PIRQA_ROUT, sc->sc_pirq[0]);
    573   1.7  drochner 	pci_conf_write(pc, tag, LPCIB_PCI_PIRQE_ROUT, sc->sc_pirq[1]);
    574   1.6  jmcneill 
    575   1.6  jmcneill 	pci_conf_write(pc, tag, LPCIB_PCI_GEN_PMCON_1, sc->sc_pmcon);
    576   1.6  jmcneill 	pci_conf_write(pc, tag, LPCIB_PCI_GEN_STA, sc->sc_fwhsel2);
    577   1.6  jmcneill 
    578   1.6  jmcneill 	if (sc->sc_has_rcba) {
    579   1.6  jmcneill 		pci_conf_write(pc, tag, LPCIB_RCBA, sc->sc_rcba_reg);
    580   1.6  jmcneill 		bus_space_write_4(sc->sc_rcbat, sc->sc_rcbah, LPCIB_RCBA_HPTC,
    581   1.6  jmcneill 		    sc->sc_hpet_reg);
    582   1.6  jmcneill 	} else if (sc->sc_has_ich5_hpet) {
    583   1.6  jmcneill 		pci_conf_write(pc, tag, LPCIB_PCI_GEN_CNTL, sc->sc_hpet_reg);
    584   1.6  jmcneill 	}
    585   1.1   xtraeme 
    586   1.6  jmcneill 	return true;
    587   1.1   xtraeme }
    588   1.1   xtraeme 
    589   1.1   xtraeme /*
    590   1.1   xtraeme  * Initialize the power management timer.
    591   1.1   xtraeme  */
    592   1.1   xtraeme static void
    593   1.9   xtraeme pmtimer_configure(device_t self)
    594   1.1   xtraeme {
    595   1.9   xtraeme 	struct lpcib_softc *sc = device_private(self);
    596   1.1   xtraeme 	pcireg_t control;
    597   1.1   xtraeme 
    598  1.60  riastrad 	/*
    599   1.1   xtraeme 	 * Check if power management I/O space is enabled and enable the ACPI_EN
    600   1.1   xtraeme 	 * bit if it's disabled.
    601   1.1   xtraeme 	 */
    602  1.12    martin 	control = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    603  1.12    martin 	    LPCIB_PCI_ACPI_CNTL);
    604  1.19    dyoung 	sc->sc_acpi_cntl = control;
    605   1.1   xtraeme 	if ((control & LPCIB_PCI_ACPI_CNTL_EN) == 0) {
    606   1.1   xtraeme 		control |= LPCIB_PCI_ACPI_CNTL_EN;
    607  1.12    martin 		pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    608  1.12    martin 		    LPCIB_PCI_ACPI_CNTL, control);
    609   1.1   xtraeme 	}
    610   1.1   xtraeme 
    611   1.1   xtraeme 	/* Attach our PM timer with the generic acpipmtimer function */
    612  1.58  riastrad 	sc->sc_pmtimer = acpipmtimer_attach(self, sc->sc_pmt, sc->sc_pmh,
    613  1.57  riastrad 	    PMC_PM1_TMR, 0);
    614   1.1   xtraeme }
    615   1.1   xtraeme 
    616  1.61  riastrad static void
    617  1.19    dyoung pmtimer_unconfigure(device_t self, int flags)
    618  1.19    dyoung {
    619  1.19    dyoung 	struct lpcib_softc *sc = device_private(self);
    620  1.61  riastrad 	int error __diagused;
    621  1.19    dyoung 
    622  1.61  riastrad 	if (sc->sc_pmtimer != NULL) {
    623  1.61  riastrad 		error = acpipmtimer_detach(sc->sc_pmtimer, flags);
    624  1.61  riastrad 		KASSERTMSG(error == 0, "error=%d", error);
    625  1.61  riastrad 	}
    626  1.19    dyoung 
    627  1.19    dyoung 	pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    628  1.19    dyoung 	    LPCIB_PCI_ACPI_CNTL, sc->sc_acpi_cntl);
    629  1.19    dyoung }
    630  1.19    dyoung 
    631   1.1   xtraeme /*
    632  1.49  pgoyette  * Configure the watchdog timer.
    633   1.1   xtraeme  */
    634   1.1   xtraeme static void
    635   1.9   xtraeme tcotimer_configure(device_t self)
    636   1.1   xtraeme {
    637   1.9   xtraeme 	struct lpcib_softc *sc = device_private(self);
    638  1.56  riastrad 	struct tco_attach_args arg;
    639   1.1   xtraeme 
    640  1.55  riastrad 	if (sc->sc_has_rcba)
    641  1.55  riastrad 		arg.ta_version = TCO_VERSION_RCBA;
    642  1.55  riastrad 	else
    643  1.55  riastrad 		arg.ta_version = TCO_VERSION_PCIB;
    644  1.58  riastrad 	arg.ta_pmt = sc->sc_pmt;
    645  1.58  riastrad 	arg.ta_pmh = sc->sc_pmh;
    646  1.49  pgoyette 	arg.ta_rcbat = sc->sc_rcbat;
    647  1.49  pgoyette 	arg.ta_rcbah = sc->sc_rcbah;
    648  1.55  riastrad 	arg.ta_pcib = &sc->sc_pcib;
    649  1.59  riastrad 	arg.ta_tcot = sc->sc_tcot;
    650  1.59  riastrad 	arg.ta_tcoh = sc->sc_tcoh;
    651   1.1   xtraeme 
    652  1.53   thorpej 	sc->sc_tco = config_found(self, &arg, NULL,
    653  1.54   thorpej 	    CFARGS(.iattr = "tcoichbus"));
    654   1.1   xtraeme }
    655   1.1   xtraeme 
    656   1.1   xtraeme 
    657   1.1   xtraeme /*
    658   1.1   xtraeme  * Intel ICH SpeedStep support.
    659   1.1   xtraeme  */
    660   1.1   xtraeme #define SS_READ(sc, reg) \
    661  1.58  riastrad 	bus_space_read_1((sc)->sc_pmt, (sc)->sc_pmh, (reg))
    662   1.1   xtraeme #define SS_WRITE(sc, reg, val) \
    663  1.58  riastrad 	bus_space_write_1((sc)->sc_pmt, (sc)->sc_pmh, (reg), (val))
    664   1.1   xtraeme 
    665   1.1   xtraeme /*
    666   1.1   xtraeme  * Linux driver says that SpeedStep on older chipsets cause
    667   1.1   xtraeme  * lockups on Dell Inspiron 8000 and 8100.
    668  1.15       mrg  * It should also not be enabled on systems with the 82855GM
    669  1.15       mrg  * Hub, which typically have an EST-enabled CPU.
    670   1.1   xtraeme  */
    671   1.1   xtraeme static int
    672  1.29    dyoung speedstep_bad_hb_check(const struct pci_attach_args *pa)
    673   1.1   xtraeme {
    674   1.1   xtraeme 
    675   1.1   xtraeme 	if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_INTEL_82815_FULL_HUB &&
    676   1.1   xtraeme 	    PCI_REVISION(pa->pa_class) < 5)
    677   1.1   xtraeme 		return 1;
    678   1.1   xtraeme 
    679  1.15       mrg 	if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_INTEL_82855GM_MCH)
    680  1.15       mrg 		return 1;
    681  1.15       mrg 
    682   1.1   xtraeme 	return 0;
    683   1.1   xtraeme }
    684   1.1   xtraeme 
    685   1.1   xtraeme static void
    686   1.9   xtraeme speedstep_configure(device_t self)
    687   1.1   xtraeme {
    688   1.9   xtraeme 	struct lpcib_softc *sc = device_private(self);
    689   1.1   xtraeme 	const struct sysctlnode	*node, *ssnode;
    690   1.1   xtraeme 	int rv;
    691   1.1   xtraeme 
    692   1.1   xtraeme 	/* Supported on ICH2-M, ICH3-M and ICH4-M.  */
    693  1.30   msaitoh 	if (PCI_PRODUCT(sc->sc_pa.pa_id) == PCI_PRODUCT_INTEL_82801DBM_LPC ||
    694   1.6  jmcneill 	    PCI_PRODUCT(sc->sc_pa.pa_id) == PCI_PRODUCT_INTEL_82801CAM_LPC ||
    695   1.6  jmcneill 	    (PCI_PRODUCT(sc->sc_pa.pa_id) == PCI_PRODUCT_INTEL_82801BAM_LPC &&
    696  1.60  riastrad 		pci_find_device(&sc->sc_pa, speedstep_bad_hb_check) == 0)) {
    697  1.19    dyoung 		pcireg_t pmcon;
    698   1.1   xtraeme 
    699   1.1   xtraeme 		/* Enable SpeedStep if it isn't already enabled. */
    700  1.12    martin 		pmcon = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    701  1.60  riastrad 		    LPCIB_PCI_GEN_PMCON_1);
    702   1.1   xtraeme 		if ((pmcon & LPCIB_PCI_GEN_PMCON_1_SS_EN) == 0)
    703  1.12    martin 			pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    704  1.60  riastrad 			    LPCIB_PCI_GEN_PMCON_1,
    705  1.60  riastrad 			    pmcon | LPCIB_PCI_GEN_PMCON_1_SS_EN);
    706   1.1   xtraeme 
    707   1.1   xtraeme 		/* Put in machdep.speedstep_state (0 for low, 1 for high). */
    708  1.19    dyoung 		if ((rv = sysctl_createv(&sc->sc_log, 0, NULL, &node,
    709   1.1   xtraeme 		    CTLFLAG_PERMANENT, CTLTYPE_NODE, "machdep", NULL,
    710   1.1   xtraeme 		    NULL, 0, NULL, 0, CTL_MACHDEP, CTL_EOL)) != 0)
    711   1.1   xtraeme 			goto err;
    712   1.1   xtraeme 
    713   1.1   xtraeme 		/* CTLFLAG_ANYWRITE? kernel option like EST? */
    714  1.19    dyoung 		if ((rv = sysctl_createv(&sc->sc_log, 0, &node, &ssnode,
    715   1.1   xtraeme 		    CTLFLAG_READWRITE, CTLTYPE_INT, "speedstep_state", NULL,
    716   1.1   xtraeme 		    speedstep_sysctl_helper, 0, NULL, 0, CTL_CREATE,
    717   1.1   xtraeme 		    CTL_EOL)) != 0)
    718   1.1   xtraeme 			goto err;
    719   1.1   xtraeme 
    720   1.1   xtraeme 		/* XXX save the sc for IO tag/handle */
    721   1.1   xtraeme 		speedstep_cookie = sc;
    722   1.9   xtraeme 		aprint_verbose_dev(self, "SpeedStep enabled\n");
    723   1.1   xtraeme 	}
    724   1.1   xtraeme 
    725   1.1   xtraeme 	return;
    726   1.1   xtraeme 
    727   1.1   xtraeme err:
    728   1.1   xtraeme 	aprint_normal("%s: sysctl_createv failed (rv = %d)\n", __func__, rv);
    729   1.1   xtraeme }
    730   1.1   xtraeme 
    731  1.19    dyoung static void
    732  1.19    dyoung speedstep_unconfigure(device_t self)
    733  1.19    dyoung {
    734  1.19    dyoung 	struct lpcib_softc *sc = device_private(self);
    735  1.19    dyoung 
    736  1.19    dyoung 	sysctl_teardown(&sc->sc_log);
    737  1.19    dyoung 	pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    738  1.19    dyoung 	    LPCIB_PCI_GEN_PMCON_1, sc->sc_pmcon_orig);
    739  1.19    dyoung 
    740  1.19    dyoung 	speedstep_cookie = NULL;
    741  1.19    dyoung }
    742  1.19    dyoung 
    743   1.1   xtraeme /*
    744   1.1   xtraeme  * get/set the SpeedStep state: 0 == low power, 1 == high power.
    745   1.1   xtraeme  */
    746   1.1   xtraeme static int
    747   1.1   xtraeme speedstep_sysctl_helper(SYSCTLFN_ARGS)
    748   1.1   xtraeme {
    749   1.1   xtraeme 	struct sysctlnode	node;
    750   1.1   xtraeme 	struct lpcib_softc 	*sc = speedstep_cookie;
    751   1.1   xtraeme 	uint8_t			state, state2;
    752   1.1   xtraeme 	int			ostate, nstate, s, error = 0;
    753   1.1   xtraeme 
    754   1.1   xtraeme 	/*
    755   1.1   xtraeme 	 * We do the dance with spl's to avoid being at high ipl during
    756   1.1   xtraeme 	 * sysctl_lookup() which can both copyin and copyout.
    757   1.1   xtraeme 	 */
    758   1.1   xtraeme 	s = splserial();
    759  1.57  riastrad 	state = SS_READ(sc, PMC_PM_SS_CNTL);
    760   1.1   xtraeme 	splx(s);
    761  1.57  riastrad 	if ((state & PMC_PM_SS_STATE_LOW) == 0)
    762   1.1   xtraeme 		ostate = 1;
    763   1.1   xtraeme 	else
    764   1.1   xtraeme 		ostate = 0;
    765   1.1   xtraeme 	nstate = ostate;
    766   1.1   xtraeme 
    767   1.1   xtraeme 	node = *rnode;
    768   1.1   xtraeme 	node.sysctl_data = &nstate;
    769   1.1   xtraeme 
    770   1.1   xtraeme 	error = sysctl_lookup(SYSCTLFN_CALL(&node));
    771   1.1   xtraeme 	if (error || newp == NULL)
    772   1.1   xtraeme 		goto out;
    773   1.1   xtraeme 
    774   1.1   xtraeme 	/* Only two states are available */
    775   1.1   xtraeme 	if (nstate != 0 && nstate != 1) {
    776   1.1   xtraeme 		error = EINVAL;
    777   1.1   xtraeme 		goto out;
    778   1.1   xtraeme 	}
    779   1.1   xtraeme 
    780   1.1   xtraeme 	s = splserial();
    781  1.57  riastrad 	state2 = SS_READ(sc, PMC_PM_SS_CNTL);
    782  1.57  riastrad 	if ((state2 & PMC_PM_SS_STATE_LOW) == 0)
    783   1.1   xtraeme 		ostate = 1;
    784   1.1   xtraeme 	else
    785   1.1   xtraeme 		ostate = 0;
    786   1.1   xtraeme 
    787   1.1   xtraeme 	if (ostate != nstate) {
    788   1.1   xtraeme 		uint8_t cntl;
    789   1.1   xtraeme 
    790   1.1   xtraeme 		if (nstate == 0)
    791  1.57  riastrad 			state2 |= PMC_PM_SS_STATE_LOW;
    792   1.1   xtraeme 		else
    793  1.57  riastrad 			state2 &= ~PMC_PM_SS_STATE_LOW;
    794   1.1   xtraeme 
    795   1.1   xtraeme 		/*
    796   1.1   xtraeme 		 * Must disable bus master arbitration during the change.
    797   1.1   xtraeme 		 */
    798  1.57  riastrad 		cntl = SS_READ(sc, PMC_PM_CTRL);
    799  1.57  riastrad 		SS_WRITE(sc, PMC_PM_CTRL, cntl | PMC_PM_SS_CNTL_ARB_DIS);
    800  1.57  riastrad 		SS_WRITE(sc, PMC_PM_SS_CNTL, state2);
    801  1.57  riastrad 		SS_WRITE(sc, PMC_PM_CTRL, cntl);
    802   1.1   xtraeme 	}
    803   1.1   xtraeme 	splx(s);
    804   1.1   xtraeme out:
    805   1.1   xtraeme 	return error;
    806   1.1   xtraeme }
    807   1.6  jmcneill 
    808   1.6  jmcneill static void
    809   1.9   xtraeme lpcib_hpet_configure(device_t self)
    810   1.6  jmcneill {
    811   1.9   xtraeme 	struct lpcib_softc *sc = device_private(self);
    812  1.31    jruoho 	struct lpcib_hpet_attach_args arg;
    813   1.6  jmcneill 	uint32_t hpet_reg, val;
    814   1.6  jmcneill 
    815   1.6  jmcneill 	if (sc->sc_has_ich5_hpet) {
    816  1.12    martin 		val = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    817   1.9   xtraeme 		    LPCIB_PCI_GEN_CNTL);
    818   1.6  jmcneill 		switch (val & LPCIB_ICH5_HPTC_WIN_MASK) {
    819   1.6  jmcneill 		case LPCIB_ICH5_HPTC_0000:
    820   1.6  jmcneill 			hpet_reg = LPCIB_ICH5_HPTC_0000_BASE;
    821   1.6  jmcneill 			break;
    822   1.6  jmcneill 		case LPCIB_ICH5_HPTC_1000:
    823   1.6  jmcneill 			hpet_reg = LPCIB_ICH5_HPTC_1000_BASE;
    824   1.6  jmcneill 			break;
    825   1.6  jmcneill 		case LPCIB_ICH5_HPTC_2000:
    826   1.6  jmcneill 			hpet_reg = LPCIB_ICH5_HPTC_2000_BASE;
    827   1.6  jmcneill 			break;
    828   1.6  jmcneill 		case LPCIB_ICH5_HPTC_3000:
    829   1.6  jmcneill 			hpet_reg = LPCIB_ICH5_HPTC_3000_BASE;
    830   1.6  jmcneill 			break;
    831   1.6  jmcneill 		default:
    832   1.6  jmcneill 			return;
    833   1.6  jmcneill 		}
    834   1.6  jmcneill 		val |= sc->sc_hpet_reg | LPCIB_ICH5_HPTC_EN;
    835  1.12    martin 		pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    836   1.9   xtraeme 		    LPCIB_PCI_GEN_CNTL, val);
    837   1.6  jmcneill 	} else if (sc->sc_has_rcba) {
    838   1.6  jmcneill 		val = bus_space_read_4(sc->sc_rcbat, sc->sc_rcbah,
    839   1.6  jmcneill 		    LPCIB_RCBA_HPTC);
    840   1.6  jmcneill 		switch (val & LPCIB_RCBA_HPTC_WIN_MASK) {
    841   1.6  jmcneill 		case LPCIB_RCBA_HPTC_0000:
    842   1.6  jmcneill 			hpet_reg = LPCIB_RCBA_HPTC_0000_BASE;
    843   1.6  jmcneill 			break;
    844   1.6  jmcneill 		case LPCIB_RCBA_HPTC_1000:
    845   1.6  jmcneill 			hpet_reg = LPCIB_RCBA_HPTC_1000_BASE;
    846   1.6  jmcneill 			break;
    847   1.6  jmcneill 		case LPCIB_RCBA_HPTC_2000:
    848   1.6  jmcneill 			hpet_reg = LPCIB_RCBA_HPTC_2000_BASE;
    849   1.6  jmcneill 			break;
    850   1.6  jmcneill 		case LPCIB_RCBA_HPTC_3000:
    851   1.6  jmcneill 			hpet_reg = LPCIB_RCBA_HPTC_3000_BASE;
    852   1.6  jmcneill 			break;
    853   1.6  jmcneill 		default:
    854   1.6  jmcneill 			return;
    855   1.6  jmcneill 		}
    856   1.6  jmcneill 		val |= LPCIB_RCBA_HPTC_EN;
    857   1.6  jmcneill 		bus_space_write_4(sc->sc_rcbat, sc->sc_rcbah, LPCIB_RCBA_HPTC,
    858   1.6  jmcneill 		    val);
    859   1.6  jmcneill 	} else {
    860   1.6  jmcneill 		/* No HPET here */
    861   1.6  jmcneill 		return;
    862   1.6  jmcneill 	}
    863   1.6  jmcneill 
    864   1.6  jmcneill 	arg.hpet_mem_t = sc->sc_pa.pa_memt;
    865   1.6  jmcneill 	arg.hpet_reg = hpet_reg;
    866   1.6  jmcneill 
    867  1.53   thorpej 	sc->sc_hpetbus = config_found(self, &arg, NULL,
    868  1.54   thorpej 	    CFARGS(.iattr = "hpetichbus"));
    869  1.19    dyoung }
    870  1.19    dyoung 
    871  1.20  jakllsch #if NGPIO > 0
    872  1.20  jakllsch static void
    873  1.20  jakllsch lpcib_gpio_configure(device_t self)
    874  1.20  jakllsch {
    875  1.20  jakllsch 	struct lpcib_softc *sc = device_private(self);
    876  1.20  jakllsch 	struct gpiobus_attach_args gba;
    877  1.20  jakllsch 	pcireg_t gpio_cntl;
    878  1.20  jakllsch 	uint32_t use, io, bit;
    879  1.20  jakllsch 	int pin, shift, base_reg, cntl_reg, reg;
    880  1.45   msaitoh 	int rv;
    881  1.20  jakllsch 
    882  1.51  jakllsch 	if (ichlpcib_gpio_disable != 0)
    883  1.51  jakllsch 		return;
    884  1.51  jakllsch 
    885  1.20  jakllsch 	/* this implies ICH >= 6, and thus different mapreg */
    886  1.20  jakllsch 	if (sc->sc_has_rcba) {
    887  1.20  jakllsch 		base_reg = LPCIB_PCI_GPIO_BASE_ICH6;
    888  1.20  jakllsch 		cntl_reg = LPCIB_PCI_GPIO_CNTL_ICH6;
    889  1.20  jakllsch 	} else {
    890  1.20  jakllsch 		base_reg = LPCIB_PCI_GPIO_BASE;
    891  1.20  jakllsch 		cntl_reg = LPCIB_PCI_GPIO_CNTL;
    892  1.20  jakllsch 	}
    893  1.20  jakllsch 
    894  1.20  jakllsch 	gpio_cntl = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
    895  1.60  riastrad 	    cntl_reg);
    896  1.20  jakllsch 
    897  1.20  jakllsch 	/* Is GPIO enabled? */
    898  1.20  jakllsch 	if ((gpio_cntl & LPCIB_PCI_GPIO_CNTL_EN) == 0)
    899  1.20  jakllsch 		return;
    900  1.45   msaitoh 	/*
    901  1.45   msaitoh 	 * The GPIO_BASE register is alike PCI BAR but not completely
    902  1.45   msaitoh 	 * compatible with it. The PMBASE define the base address and the type
    903  1.46   msaitoh 	 * but not describe the size. The value of the register may be lower
    904  1.46   msaitoh 	 * than LPCIB_PCI_GPIO_SIZE. It makes impossible to use
    905  1.46   msaitoh 	 * pci_mapreg_submap() because the function does range check.
    906  1.45   msaitoh 	 */
    907  1.46   msaitoh 	sc->sc_gpio_iot = sc->sc_pa.pa_iot;
    908  1.46   msaitoh 	reg = pci_conf_read(sc->sc_pa.pa_pc, sc->sc_pa.pa_tag, base_reg);
    909  1.46   msaitoh 	rv = bus_space_map(sc->sc_gpio_iot, PCI_MAPREG_IO_ADDR(reg),
    910  1.46   msaitoh 	    LPCIB_PCI_GPIO_SIZE, 0, &sc->sc_gpio_ioh);
    911  1.45   msaitoh 	if (rv != 0) {
    912  1.45   msaitoh 		aprint_error_dev(self, "can't map general purpose i/o space(rv = %d)\n", rv);
    913  1.20  jakllsch 		return;
    914  1.20  jakllsch 	}
    915  1.20  jakllsch 
    916  1.20  jakllsch 	mutex_init(&sc->sc_gpio_mtx, MUTEX_DEFAULT, IPL_NONE);
    917  1.20  jakllsch 
    918  1.20  jakllsch 	for (pin = 0; pin < LPCIB_GPIO_NPINS; pin++) {
    919  1.20  jakllsch 		sc->sc_gpio_pins[pin].pin_num = pin;
    920  1.20  jakllsch 
    921  1.20  jakllsch 		/* Read initial state */
    922  1.20  jakllsch 		reg = (pin < 32) ? LPCIB_GPIO_GPIO_USE_SEL : LPCIB_GPIO_GPIO_USE_SEL2;
    923  1.20  jakllsch 		use = bus_space_read_4(sc->sc_gpio_iot, sc->sc_gpio_ioh, reg);
    924  1.20  jakllsch 		reg = (pin < 32) ? LPCIB_GPIO_GP_IO_SEL : LPCIB_GPIO_GP_IO_SEL;
    925  1.20  jakllsch 		io = bus_space_read_4(sc->sc_gpio_iot, sc->sc_gpio_ioh, 4);
    926  1.20  jakllsch 		shift = pin % 32;
    927  1.20  jakllsch 		bit = __BIT(shift);
    928  1.20  jakllsch 
    929  1.20  jakllsch 		if ((use & bit) != 0) {
    930  1.20  jakllsch 			sc->sc_gpio_pins[pin].pin_caps =
    931  1.20  jakllsch 			    GPIO_PIN_INPUT | GPIO_PIN_OUTPUT;
    932  1.20  jakllsch 			if (pin < 32)
    933  1.20  jakllsch 				sc->sc_gpio_pins[pin].pin_caps |=
    934  1.20  jakllsch 				    GPIO_PIN_PULSATE;
    935  1.20  jakllsch 			if ((io & bit) != 0)
    936  1.20  jakllsch 				sc->sc_gpio_pins[pin].pin_flags =
    937  1.20  jakllsch 				    GPIO_PIN_INPUT;
    938  1.20  jakllsch 			else
    939  1.20  jakllsch 				sc->sc_gpio_pins[pin].pin_flags =
    940  1.20  jakllsch 				    GPIO_PIN_OUTPUT;
    941  1.20  jakllsch 		} else
    942  1.20  jakllsch 			sc->sc_gpio_pins[pin].pin_caps = 0;
    943  1.20  jakllsch 
    944  1.20  jakllsch 		if (lpcib_gpio_pin_read(sc, pin) == 0)
    945  1.20  jakllsch 			sc->sc_gpio_pins[pin].pin_state = GPIO_PIN_LOW;
    946  1.20  jakllsch 		else
    947  1.20  jakllsch 			sc->sc_gpio_pins[pin].pin_state = GPIO_PIN_HIGH;
    948  1.20  jakllsch 
    949  1.20  jakllsch 	}
    950  1.20  jakllsch 
    951  1.20  jakllsch 	/* Create controller tag */
    952  1.20  jakllsch 	sc->sc_gpio_gc.gp_cookie = sc;
    953  1.20  jakllsch 	sc->sc_gpio_gc.gp_pin_read = lpcib_gpio_pin_read;
    954  1.20  jakllsch 	sc->sc_gpio_gc.gp_pin_write = lpcib_gpio_pin_write;
    955  1.20  jakllsch 	sc->sc_gpio_gc.gp_pin_ctl = lpcib_gpio_pin_ctl;
    956  1.20  jakllsch 
    957  1.20  jakllsch 	memset(&gba, 0, sizeof(gba));
    958  1.20  jakllsch 
    959  1.20  jakllsch 	gba.gba_gc = &sc->sc_gpio_gc;
    960  1.20  jakllsch 	gba.gba_pins = sc->sc_gpio_pins;
    961  1.20  jakllsch 	gba.gba_npins = LPCIB_GPIO_NPINS;
    962  1.20  jakllsch 
    963  1.53   thorpej 	sc->sc_gpiobus = config_found(self, &gba, gpiobus_print,
    964  1.54   thorpej 	    CFARGS(.iattr = "gpiobus"));
    965  1.20  jakllsch }
    966  1.20  jakllsch 
    967  1.61  riastrad static void
    968  1.61  riastrad lpcib_gpio_unconfigure(device_t self)
    969  1.20  jakllsch {
    970  1.20  jakllsch 	struct lpcib_softc *sc = device_private(self);
    971  1.20  jakllsch 
    972  1.20  jakllsch 	mutex_destroy(&sc->sc_gpio_mtx);
    973  1.20  jakllsch 
    974  1.20  jakllsch 	bus_space_unmap(sc->sc_gpio_iot, sc->sc_gpio_ioh, sc->sc_gpio_ios);
    975  1.20  jakllsch }
    976  1.20  jakllsch 
    977  1.20  jakllsch static int
    978  1.20  jakllsch lpcib_gpio_pin_read(void *arg, int pin)
    979  1.20  jakllsch {
    980  1.20  jakllsch 	struct lpcib_softc *sc = arg;
    981  1.20  jakllsch 	uint32_t data;
    982  1.20  jakllsch 	int reg, shift;
    983  1.60  riastrad 
    984  1.20  jakllsch 	reg = (pin < 32) ? LPCIB_GPIO_GP_LVL : LPCIB_GPIO_GP_LVL2;
    985  1.20  jakllsch 	shift = pin % 32;
    986  1.20  jakllsch 
    987  1.20  jakllsch 	mutex_enter(&sc->sc_gpio_mtx);
    988  1.20  jakllsch 	data = bus_space_read_4(sc->sc_gpio_iot, sc->sc_gpio_ioh, reg);
    989  1.20  jakllsch 	mutex_exit(&sc->sc_gpio_mtx);
    990  1.60  riastrad 
    991  1.20  jakllsch 	return (__SHIFTOUT(data, __BIT(shift)) ? GPIO_PIN_HIGH : GPIO_PIN_LOW);
    992  1.20  jakllsch }
    993  1.20  jakllsch 
    994  1.20  jakllsch static void
    995  1.20  jakllsch lpcib_gpio_pin_write(void *arg, int pin, int value)
    996  1.20  jakllsch {
    997  1.20  jakllsch 	struct lpcib_softc *sc = arg;
    998  1.20  jakllsch 	uint32_t data;
    999  1.20  jakllsch 	int reg, shift;
   1000  1.20  jakllsch 
   1001  1.20  jakllsch 	reg = (pin < 32) ? LPCIB_GPIO_GP_LVL : LPCIB_GPIO_GP_LVL2;
   1002  1.20  jakllsch 	shift = pin % 32;
   1003  1.20  jakllsch 
   1004  1.20  jakllsch 	mutex_enter(&sc->sc_gpio_mtx);
   1005  1.20  jakllsch 
   1006  1.20  jakllsch 	data = bus_space_read_4(sc->sc_gpio_iot, sc->sc_gpio_ioh, reg);
   1007  1.20  jakllsch 
   1008  1.60  riastrad 	if (value)
   1009  1.20  jakllsch 		data |= __BIT(shift);
   1010  1.20  jakllsch 	else
   1011  1.20  jakllsch 		data &= ~__BIT(shift);
   1012  1.20  jakllsch 
   1013  1.20  jakllsch 	bus_space_write_4(sc->sc_gpio_iot, sc->sc_gpio_ioh, reg, data);
   1014  1.20  jakllsch 
   1015  1.20  jakllsch 	mutex_exit(&sc->sc_gpio_mtx);
   1016  1.20  jakllsch }
   1017  1.20  jakllsch 
   1018  1.20  jakllsch static void
   1019  1.20  jakllsch lpcib_gpio_pin_ctl(void *arg, int pin, int flags)
   1020  1.20  jakllsch {
   1021  1.20  jakllsch 	struct lpcib_softc *sc = arg;
   1022  1.20  jakllsch 	uint32_t data;
   1023  1.20  jakllsch 	int reg, shift;
   1024  1.20  jakllsch 
   1025  1.20  jakllsch 	shift = pin % 32;
   1026  1.20  jakllsch 	reg = (pin < 32) ? LPCIB_GPIO_GP_IO_SEL : LPCIB_GPIO_GP_IO_SEL2;
   1027  1.60  riastrad 
   1028  1.20  jakllsch 	mutex_enter(&sc->sc_gpio_mtx);
   1029  1.60  riastrad 
   1030  1.20  jakllsch 	data = bus_space_read_4(sc->sc_gpio_iot, sc->sc_gpio_ioh, reg);
   1031  1.60  riastrad 
   1032  1.20  jakllsch 	if (flags & GPIO_PIN_OUTPUT)
   1033  1.20  jakllsch 		data &= ~__BIT(shift);
   1034  1.20  jakllsch 
   1035  1.20  jakllsch 	if (flags & GPIO_PIN_INPUT)
   1036  1.20  jakllsch 		data |= __BIT(shift);
   1037  1.20  jakllsch 
   1038  1.20  jakllsch 	bus_space_write_4(sc->sc_gpio_iot, sc->sc_gpio_ioh, reg, data);
   1039  1.20  jakllsch 
   1040  1.20  jakllsch 
   1041  1.20  jakllsch 	if (pin < 32) {
   1042  1.20  jakllsch 		reg = LPCIB_GPIO_GPO_BLINK;
   1043  1.20  jakllsch 		data = bus_space_read_4(sc->sc_gpio_iot, sc->sc_gpio_ioh, reg);
   1044  1.20  jakllsch 
   1045  1.20  jakllsch 		if (flags & GPIO_PIN_PULSATE)
   1046  1.20  jakllsch 			data |= __BIT(shift);
   1047  1.20  jakllsch 		else
   1048  1.20  jakllsch 			data &= ~__BIT(shift);
   1049  1.20  jakllsch 
   1050  1.20  jakllsch 		bus_space_write_4(sc->sc_gpio_iot, sc->sc_gpio_ioh, reg, data);
   1051  1.20  jakllsch 	}
   1052  1.20  jakllsch 
   1053  1.20  jakllsch 	mutex_exit(&sc->sc_gpio_mtx);
   1054  1.20  jakllsch }
   1055  1.20  jakllsch #endif
   1056  1.25  jakllsch 
   1057  1.25  jakllsch #if NFWHRNG > 0
   1058  1.25  jakllsch static void
   1059  1.25  jakllsch lpcib_fwh_configure(device_t self)
   1060  1.25  jakllsch {
   1061  1.26  jakllsch 	struct lpcib_softc *sc;
   1062  1.26  jakllsch 	pcireg_t pr;
   1063  1.25  jakllsch 
   1064  1.26  jakllsch 	sc = device_private(self);
   1065  1.25  jakllsch 
   1066  1.25  jakllsch 	if (sc->sc_has_rcba) {
   1067  1.25  jakllsch 		/*
   1068  1.25  jakllsch 		 * Very unlikely to find a 82802 on a ICH6 or newer.
   1069  1.25  jakllsch 		 * Also the write enable register moved at that point.
   1070  1.25  jakllsch 		 */
   1071  1.25  jakllsch 		return;
   1072  1.25  jakllsch 	} else {
   1073  1.25  jakllsch 		/* Enable FWH write to identify FWH. */
   1074  1.25  jakllsch 		pr = pci_conf_read(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
   1075  1.26  jakllsch 		    LPCIB_PCI_BIOS_CNTL);
   1076  1.25  jakllsch 		pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
   1077  1.26  jakllsch 		    LPCIB_PCI_BIOS_CNTL, pr|LPCIB_PCI_BIOS_CNTL_BWE);
   1078  1.25  jakllsch 	}
   1079  1.25  jakllsch 
   1080  1.53   thorpej 	sc->sc_fwhbus = config_found(self, NULL, NULL,
   1081  1.54   thorpej 	    CFARGS(.iattr = "fwhichbus"));
   1082  1.25  jakllsch 
   1083  1.26  jakllsch 	/* restore previous write enable setting */
   1084  1.26  jakllsch 	pci_conf_write(sc->sc_pcib.sc_pc, sc->sc_pcib.sc_tag,
   1085  1.26  jakllsch 	    LPCIB_PCI_BIOS_CNTL, pr);
   1086  1.25  jakllsch }
   1087  1.25  jakllsch #endif
   1088