linux_machdep.c revision 1.7 1 1.7 manu /* $NetBSD: linux_machdep.c,v 1.7 2001/03/22 22:10:04 manu Exp $ */
2 1.1 manu
3 1.1 manu /*-
4 1.1 manu * Copyright (c) 1995, 2000, 2001 The NetBSD Foundation, Inc.
5 1.1 manu * All rights reserved.
6 1.1 manu *
7 1.1 manu * This code is derived from software contributed to The NetBSD Foundation
8 1.1 manu * by Frank van der Linden and Emmanuel Dreyfus.
9 1.1 manu *
10 1.1 manu * Redistribution and use in source and binary forms, with or without
11 1.1 manu * modification, are permitted provided that the following conditions
12 1.1 manu * are met:
13 1.1 manu * 1. Redistributions of source code must retain the above copyright
14 1.1 manu * notice, this list of conditions and the following disclaimer.
15 1.1 manu * 2. Redistributions in binary form must reproduce the above copyright
16 1.1 manu * notice, this list of conditions and the following disclaimer in the
17 1.1 manu * documentation and/or other materials provided with the distribution.
18 1.1 manu * 3. All advertising materials mentioning features or use of this software
19 1.1 manu * must display the following acknowledgement:
20 1.1 manu * This product includes software developed by the NetBSD
21 1.1 manu * Foundation, Inc. and its contributors.
22 1.1 manu * 4. Neither the name of The NetBSD Foundation nor the names of its
23 1.1 manu * contributors may be used to endorse or promote products derived
24 1.1 manu * from this software without specific prior written permission.
25 1.1 manu *
26 1.1 manu * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27 1.1 manu * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28 1.1 manu * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 1.1 manu * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30 1.1 manu * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 1.1 manu * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 1.1 manu * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 1.1 manu * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 1.1 manu * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 1.1 manu * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 1.1 manu * POSSIBILITY OF SUCH DAMAGE.
37 1.1 manu */
38 1.1 manu
39 1.1 manu #include <sys/param.h>
40 1.1 manu #include <sys/systm.h>
41 1.1 manu #include <sys/signalvar.h>
42 1.1 manu #include <sys/kernel.h>
43 1.1 manu #include <sys/map.h>
44 1.1 manu #include <sys/proc.h>
45 1.1 manu #include <sys/user.h>
46 1.1 manu #include <sys/buf.h>
47 1.1 manu #include <sys/reboot.h>
48 1.1 manu #include <sys/conf.h>
49 1.1 manu #include <sys/exec.h>
50 1.1 manu #include <sys/file.h>
51 1.1 manu #include <sys/callout.h>
52 1.1 manu #include <sys/malloc.h>
53 1.1 manu #include <sys/mbuf.h>
54 1.1 manu #include <sys/msgbuf.h>
55 1.1 manu #include <sys/mount.h>
56 1.1 manu #include <sys/vnode.h>
57 1.1 manu #include <sys/device.h>
58 1.1 manu #include <sys/syscallargs.h>
59 1.1 manu #include <sys/filedesc.h>
60 1.1 manu #include <sys/exec_elf.h>
61 1.1 manu #include <sys/disklabel.h>
62 1.3 manu #include <sys/ioctl.h>
63 1.1 manu #include <miscfs/specfs/specdev.h>
64 1.1 manu
65 1.1 manu #include <compat/linux/common/linux_types.h>
66 1.1 manu #include <compat/linux/common/linux_signal.h>
67 1.1 manu #include <compat/linux/common/linux_util.h>
68 1.1 manu #include <compat/linux/common/linux_ioctl.h>
69 1.1 manu #include <compat/linux/common/linux_hdio.h>
70 1.1 manu #include <compat/linux/common/linux_exec.h>
71 1.1 manu #include <compat/linux/common/linux_machdep.h>
72 1.1 manu
73 1.1 manu #include <compat/linux/linux_syscallargs.h>
74 1.1 manu
75 1.1 manu #include <machine/cpu.h>
76 1.1 manu #include <machine/psl.h>
77 1.1 manu #include <machine/reg.h>
78 1.1 manu #include <machine/vmparam.h>
79 1.1 manu
80 1.1 manu /*
81 1.1 manu * To see whether wscons is configured (for virtual console ioctl calls).
82 1.1 manu */
83 1.1 manu #if defined(_KERNEL) && !defined(_LKM)
84 1.1 manu #include "wsdisplay.h"
85 1.1 manu #endif
86 1.1 manu #if (NWSDISPLAY > 0)
87 1.1 manu #include <dev/wscons/wsconsio.h>
88 1.1 manu #include <dev/wscons/wsdisplay_usl_io.h>
89 1.1 manu #if defined(_KERNEL) && !defined(_LKM)
90 1.1 manu #endif
91 1.1 manu #endif
92 1.1 manu
93 1.1 manu /*
94 1.1 manu * Set set up registers on exec.
95 1.1 manu * XXX not used at the moment since in sys/kern/exec_conf, LINUX_COMPAT
96 1.1 manu * entry uses NetBSD's native setregs instead of linux_setregs
97 1.1 manu */
98 1.1 manu void
99 1.1 manu linux_setregs(p, pack, stack)
100 1.1 manu struct proc *p;
101 1.1 manu struct exec_package *pack;
102 1.1 manu u_long stack;
103 1.1 manu {
104 1.1 manu setregs(p, pack, stack);
105 1.1 manu }
106 1.1 manu
107 1.1 manu /*
108 1.1 manu * Send an interrupt to process.
109 1.1 manu *
110 1.1 manu * Adapted from arch/powerpc/powerpc/sig_machdep.c:sendsig and
111 1.1 manu * compat/linux/arch/i386/linux_machdep.c:linux_sendsig
112 1.1 manu *
113 1.6 manu * XXX Does not work well yet with RT signals
114 1.1 manu *
115 1.1 manu */
116 1.1 manu
117 1.1 manu void
118 1.1 manu linux_sendsig(catcher, sig, mask, code) /* XXX Check me */
119 1.1 manu sig_t catcher;
120 1.1 manu int sig;
121 1.1 manu sigset_t *mask;
122 1.1 manu u_long code;
123 1.1 manu {
124 1.1 manu struct proc *p = curproc;
125 1.1 manu struct trapframe *tf;
126 1.1 manu struct linux_sigregs *fp, frame;
127 1.4 christos struct linux_pt_regs linux_regs;
128 1.1 manu struct linux_sigcontext sc;
129 1.1 manu int onstack;
130 1.1 manu int i;
131 1.1 manu
132 1.1 manu tf = trapframe(p);
133 1.1 manu
134 1.1 manu /*
135 1.1 manu * Do we need to jump onto the signal stack?
136 1.1 manu */
137 1.1 manu onstack =
138 1.1 manu (p->p_sigctx.ps_sigstk.ss_flags & (SS_DISABLE | SS_ONSTACK)) == 0 &&
139 1.1 manu (SIGACTION(p, sig).sa_flags & SA_ONSTACK) != 0;
140 1.1 manu
141 1.1 manu /*
142 1.1 manu * Signal stack is broken (see at the end of linux_sigreturn), so we do
143 1.1 manu * not use it yet. XXX fix this.
144 1.1 manu */
145 1.1 manu onstack=0;
146 1.1 manu
147 1.1 manu /*
148 1.1 manu * Allocate space for the signal handler context.
149 1.1 manu */
150 1.4 christos if (onstack) {
151 1.4 christos fp = (struct linux_sigregs *)
152 1.4 christos ((caddr_t)p->p_sigctx.ps_sigstk.ss_sp +
153 1.1 manu p->p_sigctx.ps_sigstk.ss_size);
154 1.4 christos } else {
155 1.1 manu fp = (struct linux_sigregs *)tf->fixreg[1];
156 1.4 christos }
157 1.1 manu fp = (struct linux_sigregs *)((int)(fp - 1) & ~0xf);
158 1.1 manu
159 1.1 manu /*
160 1.1 manu * Prepare a sigcontext for later.
161 1.1 manu */
162 1.1 manu sc.lsignal = (int)native_to_linux_sig[sig];
163 1.1 manu sc.lhandler = (unsigned long)catcher;
164 1.1 manu native_to_linux_old_sigset(mask, &sc.lmask);
165 1.1 manu sc.lregs = (struct linux_pt_regs*)fp;
166 1.1 manu
167 1.1 manu /*
168 1.1 manu * Setup the signal stack frame as Linux does it in
169 1.1 manu * arch/ppc/kernel/signal.c:setup_frame()
170 1.1 manu *
171 1.1 manu * Save register context.
172 1.1 manu */
173 1.4 christos for (i = 0; i < 32; i++)
174 1.1 manu linux_regs.lgpr[i] = tf->fixreg[i];
175 1.1 manu linux_regs.lnip = tf->srr0;
176 1.1 manu linux_regs.lmsr = tf->srr1;
177 1.1 manu linux_regs.lorig_gpr3 = tf->fixreg[3]; /* XXX Is that right? */
178 1.1 manu linux_regs.lctr = tf->ctr;
179 1.1 manu linux_regs.llink = tf->lr;
180 1.1 manu linux_regs.lxer = tf->xer;
181 1.1 manu linux_regs.lccr = tf->cr;
182 1.1 manu linux_regs.lmq = 0; /* Unused, 601 only */
183 1.4 christos linux_regs.ltrap = 0; /* XXX What is ltrap counterpart in NetBSD ? */
184 1.1 manu linux_regs.ldar = tf->dar;
185 1.1 manu linux_regs.ldsisr = tf->dsisr;
186 1.1 manu linux_regs.lresult = tf->exc;
187 1.4 christos memcpy(&frame.lgp_regs, &linux_regs, sizeof(frame.lgp_regs));
188 1.1 manu
189 1.1 manu /*
190 1.1 manu * NetBSD does not uses the FPU in the kernel, so there is no
191 1.1 manu * need to save floating point register. However, Linux expects
192 1.1 manu * them to be saved on the stack. Therefore we just keep a
193 1.1 manu * gap of zero'ed data where the FP registers should be stored
194 1.1 manu */
195 1.4 christos memset(&frame.lfp_regs, 0, sizeof (frame.lfp_regs));
196 1.1 manu
197 1.1 manu /*
198 1.4 christos * Copy Linux's signal trampoline on the user stack It should not
199 1.6 manu * be used, but Linux binaries might expect it to be there.
200 1.1 manu */
201 1.4 christos frame.ltramp[0] = 0x38997777; /* li r0, 0x7777 */
202 1.4 christos frame.ltramp[1] = 0x44000002; /* sc */
203 1.1 manu
204 1.1 manu /*
205 1.1 manu * Move it to the user stack
206 1.1 manu * There is a little trick here, about the LINUX_ABIGAP: the
207 1.1 manu * linux_sigreg structure has a 56 int gap to support rs6000/xcoff
208 1.1 manu * binaries. But the Linux kernel seems to do without it, and it
209 1.1 manu * just skip it when building the stack frame. Hence the LINUX_ABIGAP.
210 1.1 manu */
211 1.4 christos if (copyout(&frame, fp, sizeof (frame) - LINUX_ABIGAP) != 0) {
212 1.1 manu /*
213 1.1 manu * Process has trashed its stack; give it an illegal
214 1.1 manu * instructoin to halt it in its tracks.
215 1.1 manu */
216 1.1 manu sigexit(p, SIGILL);
217 1.1 manu /* NOTREACHED */
218 1.1 manu }
219 1.1 manu
220 1.1 manu /*
221 1.1 manu * adjust stack pointer after the previous data copy
222 1.1 manu */
223 1.4 christos fp = (struct linux_sigregs *)
224 1.4 christos ((unsigned long)fp - (sizeof (frame) - LINUX_ABIGAP));
225 1.1 manu
226 1.1 manu /*
227 1.1 manu * "Mind the gap" Linux expects a gap here.
228 1.1 manu */
229 1.4 christos fp = (struct linux_sigregs *)
230 1.4 christos ((unsigned long)fp - LINUX__SIGNAL_FRAMESIZE);
231 1.1 manu
232 1.1 manu /*
233 1.1 manu * Add a sigcontext on the stack
234 1.1 manu */
235 1.4 christos if (copyout(&sc, fp, sizeof (struct linux_sigcontext)) != 0) {
236 1.1 manu /*
237 1.1 manu * Process has trashed its stack; give it an illegal
238 1.1 manu * instructoin to halt it in its tracks.
239 1.1 manu */
240 1.1 manu sigexit(p, SIGILL);
241 1.1 manu /* NOTREACHED */
242 1.1 manu }
243 1.1 manu
244 1.1 manu /*
245 1.1 manu * Here, I expected to need a stack pointer adjust after the copy.
246 1.1 manu * Something like this: (unsigned long)fp-=sizeof(struct sigcontext)
247 1.1 manu * But if we do it, the signal handler does not get its arguments as
248 1.1 manu * expected.
249 1.1 manu */
250 1.1 manu
251 1.1 manu /*
252 1.1 manu * Set the registers according to how the Linux process expects them
253 1.1 manu */
254 1.1 manu tf->fixreg[1] = (int)fp;
255 1.1 manu tf->lr = (int)catcher;
256 1.7 manu tf->fixreg[3] = (int)native_to_linux_sig[sig];
257 1.2 manu tf->fixreg[4] = (int)&fp->lgp_regs;
258 1.1 manu tf->srr0 = (int)p->p_sigctx.ps_sigcode;
259 1.1 manu
260 1.1 manu /*
261 1.1 manu * Remember that we're now on the signal stack.
262 1.1 manu */
263 1.1 manu if (onstack)
264 1.1 manu p->p_sigctx.ps_sigstk.ss_flags |= SS_ONSTACK;
265 1.1 manu #ifdef DEBUG_LINUX
266 1.1 manu printf("linux_sendsig: exitting. fp=0x%lx\n",(long)fp);
267 1.1 manu #endif
268 1.1 manu }
269 1.1 manu
270 1.1 manu /*
271 1.1 manu * System call to cleanup state after a signal
272 1.1 manu * has been taken. Reset signal mask and
273 1.1 manu * stack state from context left by sendsig (above).
274 1.1 manu * Return to previous pc and psl as specified by
275 1.1 manu * context left by sendsig. Check carefully to
276 1.1 manu * make sure that the user has not modified the
277 1.1 manu * psl to gain improper privileges or to cause
278 1.1 manu * a machine fault.
279 1.1 manu *
280 1.1 manu * XXX not tested
281 1.1 manu */
282 1.1 manu int
283 1.1 manu linux_sys_rt_sigreturn(p, v, retval)
284 1.1 manu struct proc *p;
285 1.1 manu void *v;
286 1.1 manu register_t *retval;
287 1.1 manu {
288 1.1 manu struct linux_sys_rt_sigreturn_args /* {
289 1.1 manu syscallarg(struct linux_rt_sigframe *) sfp;
290 1.1 manu } */ *uap = v;
291 1.1 manu struct linux_rt_sigframe *scp, sigframe;
292 1.1 manu struct trapframe *tf;
293 1.1 manu sigset_t mask;
294 1.1 manu int i;
295 1.1 manu
296 1.1 manu /*
297 1.1 manu * The trampoline code hands us the context.
298 1.1 manu * It is unsafe to keep track of it ourselves, in the event that a
299 1.1 manu * program jumps out of a signal handler.
300 1.1 manu */
301 1.1 manu scp = SCARG(uap, sfp);
302 1.1 manu
303 1.1 manu /*
304 1.4 christos * It seems we need a 16 bytes alignement here (it just works with it,
305 1.4 christos * don't ask me why
306 1.1 manu */
307 1.5 manu scp = (struct linux_rt_sigframe *)((unsigned long)scp & ~0xfUL);
308 1.1 manu
309 1.1 manu /*
310 1.1 manu * Get the context from user stack
311 1.1 manu */
312 1.4 christos if (copyin((caddr_t)scp, &sigframe, sizeof(*scp)) != 0)
313 1.1 manu return (EFAULT);
314 1.1 manu
315 1.1 manu /*
316 1.1 manu * Grab the signal mask
317 1.1 manu */
318 1.1 manu linux_to_native_sigset(&sigframe.luc.luc_sigmask, &mask);
319 1.1 manu
320 1.1 manu /*
321 1.1 manu * Restore register context. XXX need security review
322 1.1 manu */
323 1.1 manu tf = trapframe(p);
324 1.1 manu #ifdef DEBUG_LINUX
325 1.1 manu printf("linux_sys_sigreturn: trapframe=0x%lx scp=0x%lx\n",
326 1.1 manu (unsigned long)tf, (unsigned long)scp);
327 1.1 manu #endif
328 1.1 manu
329 1.1 manu if ((sigframe.luc.luc_context.lregs->lmsr & PSL_USERSTATIC) !=
330 1.1 manu (tf->srr1 & PSL_USERSTATIC))
331 1.1 manu return (EINVAL);
332 1.1 manu
333 1.4 christos for (i = 0; i < 32; i++)
334 1.1 manu tf->fixreg[i] = sigframe.luc.luc_context.lregs->lgpr[i];
335 1.1 manu tf->lr = sigframe.luc.luc_context.lregs->llink;
336 1.1 manu tf->cr = sigframe.luc.luc_context.lregs->lccr;
337 1.1 manu tf->xer = sigframe.luc.luc_context.lregs->lxer;
338 1.1 manu tf->ctr = sigframe.luc.luc_context.lregs->lctr;
339 1.1 manu tf->srr0 = sigframe.luc.luc_context.lregs->lnip;
340 1.1 manu tf->srr1 = sigframe.luc.luc_context.lregs->lmsr;
341 1.1 manu tf->dar = sigframe.luc.luc_context.lregs->ldar;
342 1.1 manu tf->dsisr = sigframe.luc.luc_context.lregs->ldsisr;
343 1.1 manu tf->exc = sigframe.luc.luc_context.lregs->lresult;
344 1.1 manu
345 1.1 manu /*
346 1.1 manu * Restore signal stack.
347 1.1 manu *
348 1.1 manu * XXX cannot find the onstack information in Linux sig context.
349 1.1 manu * Is signal stack really supported on Linux?
350 1.1 manu *
351 1.1 manu * It seems to be supported in libc6...
352 1.1 manu */
353 1.1 manu /* if (sc.sc_onstack & SS_ONSTACK)
354 1.1 manu p->p_sigctx.ps_sigstk.ss_flags |= SS_ONSTACK;
355 1.1 manu else */
356 1.1 manu p->p_sigctx.ps_sigstk.ss_flags &= ~SS_ONSTACK;
357 1.1 manu
358 1.1 manu return (EJUSTRETURN);
359 1.1 manu }
360 1.1 manu
361 1.1 manu
362 1.1 manu /*
363 1.1 manu * The following needs code review for potential security issues
364 1.1 manu */
365 1.1 manu int
366 1.1 manu linux_sys_sigreturn(p, v, retval)
367 1.1 manu struct proc *p;
368 1.1 manu void *v;
369 1.1 manu register_t *retval;
370 1.1 manu {
371 1.1 manu struct linux_sys_sigreturn_args /* {
372 1.1 manu syscallarg(struct linux_sigcontext *) scp;
373 1.1 manu } */ *uap = v;
374 1.1 manu struct linux_sigcontext *scp, context;
375 1.1 manu struct trapframe *tf;
376 1.1 manu sigset_t mask;
377 1.1 manu int i;
378 1.1 manu
379 1.1 manu /*
380 1.1 manu * The trampoline code hands us the context.
381 1.1 manu * It is unsafe to keep track of it ourselves, in the event that a
382 1.1 manu * program jumps out of a signal handler.
383 1.1 manu */
384 1.1 manu scp = SCARG(uap, scp);
385 1.1 manu
386 1.1 manu /*
387 1.4 christos * It seems we need a 16 bytes alignement here (it just works with it,
388 1.4 christos * don't ask me why
389 1.1 manu */
390 1.1 manu (unsigned long)scp = (unsigned long) scp & ~0xfUL;
391 1.1 manu
392 1.1 manu /*
393 1.1 manu * Get the context from user stack
394 1.1 manu */
395 1.4 christos if (copyin(scp, &context, sizeof(struct linux_sigcontext)) != 0)
396 1.1 manu return (EFAULT);
397 1.1 manu
398 1.1 manu /*
399 1.1 manu * Restore register context. XXX need security review
400 1.1 manu */
401 1.1 manu tf = trapframe(p);
402 1.1 manu #ifdef DEBUG_LINUX
403 1.1 manu printf("linux_sys_sigreturn: trapframe=0x%lx scp=0x%lx\n",
404 1.1 manu (unsigned long)tf, (unsigned long)scp);
405 1.1 manu #endif
406 1.1 manu
407 1.4 christos if ((context.lregs->lmsr & PSL_USERSTATIC) !=
408 1.4 christos (tf->srr1 & PSL_USERSTATIC))
409 1.1 manu return (EINVAL);
410 1.1 manu
411 1.4 christos for (i = 0; i < 32; i++)
412 1.1 manu tf->fixreg[i] = context.lregs->lgpr[i];
413 1.1 manu tf->lr = context.lregs->llink;
414 1.1 manu tf->cr = context.lregs->lccr;
415 1.1 manu tf->xer = context.lregs->lxer;
416 1.1 manu tf->ctr = context.lregs->lctr;
417 1.1 manu tf->srr0 = context.lregs->lnip;
418 1.1 manu tf->srr1 = context.lregs->lmsr;
419 1.1 manu tf->dar = context.lregs->ldar;
420 1.1 manu tf->dsisr = context.lregs->ldsisr;
421 1.1 manu tf->exc = context.lregs->lresult;
422 1.1 manu
423 1.1 manu /*
424 1.1 manu * Restore signal stack.
425 1.1 manu *
426 1.1 manu * XXX cannot find the onstack information in Linux sig context.
427 1.1 manu * Is signal stack really supported on Linux?
428 1.1 manu */
429 1.4 christos #if 0
430 1.4 christos if (sc.sc_onstack & SS_ONSTACK)
431 1.1 manu p->p_sigctx.ps_sigstk.ss_flags |= SS_ONSTACK;
432 1.4 christos else
433 1.4 christos #endif
434 1.1 manu p->p_sigctx.ps_sigstk.ss_flags &= ~SS_ONSTACK;
435 1.1 manu
436 1.1 manu /* Restore signal mask. */
437 1.1 manu linux_old_to_native_sigset(&context.lmask, &mask);
438 1.1 manu (void) sigprocmask1(p, SIG_SETMASK, &mask, 0);
439 1.1 manu
440 1.1 manu return (EJUSTRETURN);
441 1.1 manu }
442 1.1 manu
443 1.1 manu
444 1.1 manu int
445 1.1 manu linux_sys_modify_ldt(p, v, retval)
446 1.1 manu struct proc *p;
447 1.1 manu void *v;
448 1.1 manu register_t *retval;
449 1.1 manu {
450 1.1 manu /*
451 1.4 christos * This syscall is not implemented in Linux/PowerPC: we should not
452 1.4 christos * be here
453 1.1 manu */
454 1.1 manu #ifdef DEBUG_LINUX
455 1.1 manu printf("linux_sys_modify_ldt: should not be here.\n");
456 1.1 manu #endif
457 1.1 manu return 0;
458 1.1 manu }
459 1.1 manu
460 1.6 manu /*
461 1.6 manu * major device numbers remapping
462 1.6 manu */
463 1.1 manu dev_t
464 1.1 manu linux_fakedev(dev)
465 1.1 manu dev_t dev;
466 1.1 manu {
467 1.1 manu /* XXX write me */
468 1.1 manu return dev;
469 1.1 manu }
470 1.1 manu
471 1.1 manu /*
472 1.1 manu * We come here in a last attempt to satisfy a Linux ioctl() call
473 1.1 manu */
474 1.1 manu int
475 1.1 manu linux_machdepioctl(p, v, retval)
476 1.1 manu struct proc *p;
477 1.1 manu void *v;
478 1.1 manu register_t *retval;
479 1.1 manu {
480 1.1 manu struct linux_sys_ioctl_args /* {
481 1.1 manu syscallarg(int) fd;
482 1.1 manu syscallarg(u_long) com;
483 1.1 manu syscallarg(caddr_t) data;
484 1.1 manu } */ *uap = v;
485 1.1 manu struct sys_ioctl_args bia;
486 1.1 manu u_long com;
487 1.1 manu
488 1.1 manu SCARG(&bia, fd) = SCARG(uap, fd);
489 1.1 manu SCARG(&bia, data) = SCARG(uap, data);
490 1.1 manu com = SCARG(uap, com);
491 1.1 manu
492 1.1 manu switch (com) {
493 1.1 manu default:
494 1.1 manu printf("linux_machdepioctl: invalid ioctl %08lx\n", com);
495 1.1 manu return EINVAL;
496 1.1 manu }
497 1.1 manu SCARG(&bia, com) = com;
498 1.1 manu return sys_ioctl(p, &bia, retval);
499 1.1 manu }
500 1.1 manu /*
501 1.1 manu * Set I/O permissions for a process. Just set the maximum level
502 1.1 manu * right away (ignoring the argument), otherwise we would have
503 1.1 manu * to rely on I/O permission maps, which are not implemented.
504 1.1 manu */
505 1.1 manu int
506 1.1 manu linux_sys_iopl(p, v, retval)
507 1.1 manu struct proc *p;
508 1.1 manu void *v;
509 1.1 manu register_t *retval;
510 1.1 manu {
511 1.1 manu /*
512 1.1 manu * This syscall is not implemented in Linux/PowerPC: we should not be here
513 1.1 manu */
514 1.1 manu #ifdef DEBUG_LINUX
515 1.1 manu printf("linux_sys_iopl: should not be here.\n");
516 1.1 manu #endif
517 1.1 manu return 0;
518 1.1 manu }
519 1.1 manu
520 1.1 manu /*
521 1.1 manu * See above. If a root process tries to set access to an I/O port,
522 1.1 manu * just let it have the whole range.
523 1.1 manu */
524 1.1 manu int
525 1.1 manu linux_sys_ioperm(p, v, retval)
526 1.1 manu struct proc *p;
527 1.1 manu void *v;
528 1.1 manu register_t *retval;
529 1.1 manu {
530 1.1 manu /*
531 1.1 manu * This syscall is not implemented in Linux/PowerPC: we should not be here
532 1.1 manu */
533 1.1 manu #ifdef DEBUG_LINUX
534 1.1 manu printf("linux_sys_ioperm: should not be here.\n");
535 1.1 manu #endif
536 1.1 manu return 0;
537 1.1 manu }
538 1.1 manu
539 1.1 manu /*
540 1.1 manu * wrapper linux_sys_new_uname() -> linux_sys_uname()
541 1.1 manu */
542 1.1 manu int
543 1.1 manu linux_sys_new_uname(p, v, retval)
544 1.1 manu struct proc *p;
545 1.1 manu void *v;
546 1.1 manu register_t *retval;
547 1.1 manu {
548 1.1 manu return linux_sys_uname(p, v, retval);
549 1.1 manu }
550 1.1 manu
551 1.1 manu /*
552 1.1 manu * wrapper linux_sys_new_select() -> linux_sys_select()
553 1.1 manu */
554 1.1 manu int
555 1.1 manu linux_sys_new_select(p, v, retval)
556 1.1 manu struct proc *p;
557 1.1 manu void *v;
558 1.1 manu register_t *retval;
559 1.1 manu {
560 1.1 manu return linux_sys_select(p, v, retval);
561 1.1 manu }
562