db_command.c revision 1.117 1 1.117 blymn /* $NetBSD: db_command.c,v 1.117 2008/07/10 12:42:24 blymn Exp $ */
2 1.64 simonb /*
3 1.1 cgd * Mach Operating System
4 1.1 cgd * Copyright (c) 1991,1990 Carnegie Mellon University
5 1.1 cgd * All Rights Reserved.
6 1.64 simonb *
7 1.1 cgd * Permission to use, copy, modify and distribute this software and its
8 1.1 cgd * documentation is hereby granted, provided that both the copyright
9 1.1 cgd * notice and this permission notice appear in all copies of the
10 1.1 cgd * software, derivative works or modified versions, and any portions
11 1.1 cgd * thereof, and that both notices appear in supporting documentation.
12 1.64 simonb *
13 1.30 pk * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
14 1.1 cgd * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
15 1.1 cgd * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
16 1.64 simonb *
17 1.1 cgd * Carnegie Mellon requests users of this software to return to
18 1.64 simonb *
19 1.1 cgd * Software Distribution Coordinator or Software.Distribution (at) CS.CMU.EDU
20 1.1 cgd * School of Computer Science
21 1.1 cgd * Carnegie Mellon University
22 1.1 cgd * Pittsburgh PA 15213-3890
23 1.64 simonb *
24 1.1 cgd * any improvements or extensions that they make and grant Carnegie the
25 1.1 cgd * rights to redistribute these changes.
26 1.1 cgd */
27 1.98 martin /*
28 1.98 martin * Copyright (c) 1996, 1997, 1998, 1999, 2002 The NetBSD Foundation, Inc.
29 1.98 martin * All rights reserved.
30 1.98 martin *
31 1.98 martin * This code is derived from software contributed to The NetBSD Foundation
32 1.98 martin * by Adam Hamsik.
33 1.98 martin *
34 1.98 martin * Redistribution and use in source and binary forms, with or without
35 1.98 martin * modification, are permitted provided that the following conditions
36 1.98 martin * are met:
37 1.98 martin * 1. Redistributions of source code must retain the above copyright
38 1.98 martin * notice, this list of conditions and the following disclaimer.
39 1.98 martin * 2. Redistributions in binary form must reproduce the above copyright
40 1.98 martin * notice, this list of conditions and the following disclaimer in the
41 1.98 martin * documentation and/or other materials provided with the distribution.
42 1.98 martin *
43 1.98 martin * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
44 1.98 martin * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
45 1.98 martin * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
46 1.98 martin * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
47 1.98 martin * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
48 1.98 martin * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
49 1.98 martin * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
50 1.98 martin * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
51 1.98 martin * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
52 1.98 martin * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
53 1.98 martin * POSSIBILITY OF SUCH DAMAGE.
54 1.98 martin */
55 1.25 mrg
56 1.63 lukem /*
57 1.63 lukem * Command dispatcher.
58 1.63 lukem */
59 1.63 lukem
60 1.63 lukem #include <sys/cdefs.h>
61 1.117 blymn __KERNEL_RCSID(0, "$NetBSD: db_command.c,v 1.117 2008/07/10 12:42:24 blymn Exp $");
62 1.63 lukem
63 1.27 tron #include "opt_ddb.h"
64 1.69 briggs #include "opt_kgdb.h"
65 1.40 jhawk #include "opt_inet.h"
66 1.80 yamt #include "opt_ddbparam.h"
67 1.5 mycroft
68 1.7 mycroft #include <sys/param.h>
69 1.18 christos #include <sys/systm.h>
70 1.23 scottr #include <sys/reboot.h>
71 1.65 simonb #include <sys/device.h>
72 1.112 yamt #include <sys/lwp.h>
73 1.65 simonb #include <sys/malloc.h>
74 1.83 yamt #include <sys/mbuf.h>
75 1.65 simonb #include <sys/namei.h>
76 1.65 simonb #include <sys/pool.h>
77 1.7 mycroft #include <sys/proc.h>
78 1.36 chs #include <sys/vnode.h>
79 1.112 yamt #include <sys/vmem.h>
80 1.92 ad #include <sys/lockdebug.h>
81 1.92 ad #include <sys/sleepq.h>
82 1.109 ad #include <sys/cpu.h>
83 1.15 gwr
84 1.98 martin /*include queue macros*/
85 1.98 martin #include <sys/queue.h>
86 1.98 martin
87 1.1 cgd #include <machine/db_machdep.h> /* type definitions */
88 1.1 cgd
89 1.58 mrg #if defined(_KERNEL_OPT)
90 1.34 sommerfe #include "opt_multiprocessor.h"
91 1.34 sommerfe #endif
92 1.34 sommerfe
93 1.1 cgd #include <ddb/db_lex.h>
94 1.1 cgd #include <ddb/db_output.h>
95 1.10 pk #include <ddb/db_command.h>
96 1.16 christos #include <ddb/db_break.h>
97 1.16 christos #include <ddb/db_watch.h>
98 1.16 christos #include <ddb/db_run.h>
99 1.16 christos #include <ddb/db_variables.h>
100 1.16 christos #include <ddb/db_interface.h>
101 1.16 christos #include <ddb/db_sym.h>
102 1.16 christos #include <ddb/db_extern.h>
103 1.1 cgd
104 1.24 mrg #include <uvm/uvm_extern.h>
105 1.26 jonathan #include <uvm/uvm_ddb.h>
106 1.24 mrg
107 1.46 jhawk #include "arp.h"
108 1.46 jhawk
109 1.1 cgd /*
110 1.64 simonb * Results of command search.
111 1.64 simonb */
112 1.64 simonb #define CMD_UNIQUE 0
113 1.64 simonb #define CMD_FOUND 1
114 1.64 simonb #define CMD_NONE 2
115 1.64 simonb #define CMD_AMBIGUOUS 3
116 1.98 martin
117 1.64 simonb /*
118 1.1 cgd * Exported global variables
119 1.1 cgd */
120 1.93 thorpej bool db_cmd_loop_done;
121 1.17 gwr label_t *db_recover;
122 1.64 simonb db_addr_t db_dot;
123 1.64 simonb db_addr_t db_last_addr;
124 1.64 simonb db_addr_t db_prev;
125 1.64 simonb db_addr_t db_next;
126 1.1 cgd
127 1.98 martin
128 1.98 martin /*
129 1.98 martin New DDB api for adding and removing commands uses three lists, because
130 1.98 martin we use two types of commands
131 1.98 martin a) standard commands without subcommands -> reboot
132 1.98 martin b) show commands which are subcommands of show command -> show aio_jobs
133 1.98 martin c) if defined machine specific commands
134 1.116 blymn
135 1.98 martin ddb_add_cmd, ddb_rem_cmd use type (DDB_SHOW_CMD||DDB_BASE_CMD)argument to
136 1.98 martin add them to representativ lists.
137 1.98 martin */
138 1.98 martin
139 1.103 martin static const struct db_command db_command_table[];
140 1.103 martin static const struct db_command db_show_cmds[];
141 1.103 martin #ifdef DB_MACHINE_COMMANDS
142 1.103 martin static const struct db_command db_machine_command_table[];
143 1.103 martin #endif
144 1.103 martin
145 1.105 martin /* the global queue of all command tables */
146 1.105 martin TAILQ_HEAD(db_cmd_tbl_en_head, db_cmd_tbl_en);
147 1.105 martin
148 1.105 martin /* TAILQ entry used to register command tables */
149 1.105 martin struct db_cmd_tbl_en {
150 1.105 martin const struct db_command *db_cmd; /* cmd table */
151 1.105 martin TAILQ_ENTRY(db_cmd_tbl_en) db_cmd_next;
152 1.105 martin };
153 1.105 martin
154 1.103 martin /* head of base commands list */
155 1.98 martin static struct db_cmd_tbl_en_head db_base_cmd_list =
156 1.98 martin TAILQ_HEAD_INITIALIZER(db_base_cmd_list);
157 1.103 martin static struct db_cmd_tbl_en db_base_cmd_builtins =
158 1.103 martin { .db_cmd = db_command_table };
159 1.98 martin
160 1.103 martin /* head of show commands list */
161 1.98 martin static struct db_cmd_tbl_en_head db_show_cmd_list =
162 1.98 martin TAILQ_HEAD_INITIALIZER(db_show_cmd_list);
163 1.103 martin static struct db_cmd_tbl_en db_show_cmd_builtins =
164 1.103 martin { .db_cmd = db_show_cmds };
165 1.98 martin
166 1.103 martin /* head of machine commands list */
167 1.98 martin static struct db_cmd_tbl_en_head db_mach_cmd_list =
168 1.98 martin TAILQ_HEAD_INITIALIZER(db_mach_cmd_list);
169 1.103 martin #ifdef DB_MACHINE_COMMANDS
170 1.103 martin static struct db_cmd_tbl_en db_mach_cmd_builtins =
171 1.103 martin { .db_cmd = db_machine_command_table };
172 1.98 martin #endif
173 1.98 martin
174 1.1 cgd /*
175 1.1 cgd * if 'ed' style: 'dot' is set at start of last item printed,
176 1.1 cgd * and '+' points to next line.
177 1.1 cgd * Otherwise: 'dot' points to next item, '..' points to last.
178 1.1 cgd */
179 1.95 thorpej static bool db_ed_style = true;
180 1.64 simonb
181 1.104 martin static void db_init_commands(void);
182 1.103 martin static int db_register_tbl_entry(uint8_t type,
183 1.103 martin struct db_cmd_tbl_en *list_ent);
184 1.98 martin static void db_cmd_list(const struct db_cmd_tbl_en_head *);
185 1.98 martin static int db_cmd_search(const char *, const struct db_command *,
186 1.98 martin const struct db_command **);
187 1.98 martin static void db_command(const struct db_command **);
188 1.94 matt static void db_buf_print_cmd(db_expr_t, bool, db_expr_t, const char *);
189 1.94 matt static void db_event_print_cmd(db_expr_t, bool, db_expr_t, const char *);
190 1.94 matt static void db_fncall(db_expr_t, bool, db_expr_t, const char *);
191 1.98 martin static int db_get_list_type(const char *);
192 1.98 martin static void db_help_print_cmd(db_expr_t, bool, db_expr_t, const char *);
193 1.98 martin static void db_lock_print_cmd(db_expr_t, bool, db_expr_t, const char *);
194 1.98 martin static void db_mount_print_cmd(db_expr_t, bool, db_expr_t, const char *);
195 1.98 martin static void db_mbuf_print_cmd(db_expr_t, bool, db_expr_t, const char *);
196 1.94 matt static void db_malloc_print_cmd(db_expr_t, bool, db_expr_t, const char *);
197 1.94 matt static void db_map_print_cmd(db_expr_t, bool, db_expr_t, const char *);
198 1.98 martin static void db_namecache_print_cmd(db_expr_t, bool, db_expr_t,
199 1.98 martin const char *);
200 1.94 matt static void db_object_print_cmd(db_expr_t, bool, db_expr_t, const char *);
201 1.94 matt static void db_page_print_cmd(db_expr_t, bool, db_expr_t, const char *);
202 1.94 matt static void db_show_all_pages(db_expr_t, bool, db_expr_t, const char *);
203 1.94 matt static void db_pool_print_cmd(db_expr_t, bool, db_expr_t, const char *);
204 1.94 matt static void db_reboot_cmd(db_expr_t, bool, db_expr_t, const char *);
205 1.94 matt static void db_sifting_cmd(db_expr_t, bool, db_expr_t, const char *);
206 1.94 matt static void db_stack_trace_cmd(db_expr_t, bool, db_expr_t, const char *);
207 1.94 matt static void db_sync_cmd(db_expr_t, bool, db_expr_t, const char *);
208 1.112 yamt static void db_whatis_cmd(db_expr_t, bool, db_expr_t, const char *);
209 1.94 matt static void db_uvmexp_print_cmd(db_expr_t, bool, db_expr_t, const char *);
210 1.94 matt static void db_vnode_print_cmd(db_expr_t, bool, db_expr_t, const char *);
211 1.64 simonb
212 1.64 simonb static const struct db_command db_show_cmds[] = {
213 1.98 martin /*added from all sub cmds*/
214 1.98 martin { DDB_ADD_CMD("callout", db_show_callout,
215 1.98 martin 0 ,"List all used callout functions.",NULL,NULL) },
216 1.98 martin { DDB_ADD_CMD("pages", db_show_all_pages,
217 1.98 martin 0 ,"List all used memory pages.",NULL,NULL) },
218 1.98 martin { DDB_ADD_CMD("procs", db_show_all_procs,
219 1.98 martin 0 ,"List all processes.",NULL,NULL) },
220 1.98 martin { DDB_ADD_CMD("pools", db_show_all_pools,
221 1.98 martin 0 ,"Show all poolS",NULL,NULL) },
222 1.98 martin /*added from all sub cmds*/
223 1.98 martin { DDB_ADD_CMD("aio_jobs", db_show_aio_jobs, 0,
224 1.98 martin "Show aio jobs",NULL,NULL) },
225 1.98 martin { DDB_ADD_CMD("all", NULL,
226 1.98 martin CS_COMPAT, NULL,NULL,NULL) },
227 1.64 simonb #if defined(INET) && (NARP > 0)
228 1.98 martin { DDB_ADD_CMD("arptab", db_show_arptab, 0,NULL,NULL,NULL) },
229 1.64 simonb #endif
230 1.98 martin { DDB_ADD_CMD("breaks", db_listbreak_cmd, 0,
231 1.98 martin "Display all breaks.",NULL,NULL) },
232 1.98 martin { DDB_ADD_CMD("buf", db_buf_print_cmd, 0,
233 1.98 martin "Print the struct buf at address.", "[/f] address",NULL) },
234 1.98 martin { DDB_ADD_CMD("event", db_event_print_cmd, 0,
235 1.98 martin "Print all the non-zero evcnt(9) event counters.", "[/f]",NULL) },
236 1.117 blymn { DDB_ADD_CMD("files", db_show_files_cmd, 0,
237 1.117 blymn "Print the files open by process at address",
238 1.117 blymn "[/f] address", NULL) },
239 1.98 martin { DDB_ADD_CMD("lock", db_lock_print_cmd, 0,NULL,NULL,NULL) },
240 1.98 martin { DDB_ADD_CMD("malloc", db_malloc_print_cmd,0,NULL,NULL,NULL) },
241 1.98 martin { DDB_ADD_CMD("map", db_map_print_cmd, 0,
242 1.98 martin "Print the vm_map at address.", "[/f] address",NULL) },
243 1.98 martin { DDB_ADD_CMD("mount", db_mount_print_cmd, 0,
244 1.98 martin "Print the mount structure at address.", "[/f] address",NULL) },
245 1.98 martin { DDB_ADD_CMD("mbuf", db_mbuf_print_cmd, 0,NULL,NULL,
246 1.98 martin "-c prints all mbuf chains") },
247 1.98 martin { DDB_ADD_CMD("ncache", db_namecache_print_cmd, 0,
248 1.98 martin "Dump the namecache list.", "address",NULL) },
249 1.98 martin { DDB_ADD_CMD("object", db_object_print_cmd, 0,
250 1.98 martin "Print the vm_object at address.", "[/f] address",NULL) },
251 1.98 martin { DDB_ADD_CMD("page", db_page_print_cmd, 0,
252 1.98 martin "Print the vm_page at address.", "[/f] address",NULL) },
253 1.98 martin { DDB_ADD_CMD("pool", db_pool_print_cmd, 0,
254 1.98 martin "Print the pool at address.", "[/clp] address",NULL) },
255 1.98 martin { DDB_ADD_CMD("registers", db_show_regs, 0,
256 1.98 martin "Display the register set.", "[/u]",NULL) },
257 1.98 martin { DDB_ADD_CMD("sched_qs", db_show_sched_qs, 0,
258 1.98 martin "Print the state of the scheduler's run queues.",
259 1.98 martin NULL,NULL) },
260 1.98 martin { DDB_ADD_CMD("uvmexp", db_uvmexp_print_cmd, 0,
261 1.98 martin "Print a selection of UVM counters and statistics.",
262 1.98 martin NULL,NULL) },
263 1.98 martin { DDB_ADD_CMD("vnode", db_vnode_print_cmd, 0,
264 1.98 martin "Print the vnode at address.", "[/f] address",NULL) },
265 1.98 martin { DDB_ADD_CMD("watches", db_listwatch_cmd, 0,
266 1.98 martin "Display all watchpoints.", NULL,NULL) },
267 1.98 martin { DDB_ADD_CMD(NULL, NULL, 0,NULL,NULL,NULL) }
268 1.64 simonb };
269 1.64 simonb
270 1.77 yamt /* arch/<arch>/<arch>/db_interface.c */
271 1.77 yamt #ifdef DB_MACHINE_COMMANDS
272 1.77 yamt extern const struct db_command db_machine_command_table[];
273 1.77 yamt #endif
274 1.77 yamt
275 1.64 simonb static const struct db_command db_command_table[] = {
276 1.98 martin { DDB_ADD_CMD("b", db_breakpoint_cmd, 0,
277 1.98 martin "Set a breakpoint at address", "[/u] address[,count].",NULL) },
278 1.98 martin { DDB_ADD_CMD("break", db_breakpoint_cmd, 0,
279 1.98 martin "Set a breakpoint at address", "[/u] address[,count].",NULL) },
280 1.98 martin { DDB_ADD_CMD("bt", db_stack_trace_cmd, 0,
281 1.98 martin "Show backtrace.", "See help trace.",NULL) },
282 1.98 martin { DDB_ADD_CMD("c", db_continue_cmd, 0,
283 1.98 martin "Continue execution.", "[/c]",NULL) },
284 1.98 martin { DDB_ADD_CMD("call", db_fncall, CS_OWN,
285 1.98 martin "Call the function", "address[(expression[,...])]",NULL) },
286 1.98 martin { DDB_ADD_CMD("callout", db_show_callout, 0, NULL,
287 1.98 martin NULL,NULL ) },
288 1.98 martin { DDB_ADD_CMD("continue", db_continue_cmd, 0,
289 1.98 martin "Continue execution.", "[/c]",NULL) },
290 1.98 martin { DDB_ADD_CMD("d", db_delete_cmd, 0,
291 1.98 martin "Delete a breakpoint.", "address | #number",NULL) },
292 1.98 martin { DDB_ADD_CMD("delete", db_delete_cmd, 0,
293 1.98 martin "Delete a breakpoint.", "address | #number",NULL) },
294 1.98 martin { DDB_ADD_CMD("dmesg", db_dmesg, 0,
295 1.98 martin "Show kernel message buffer.", "[count]",NULL) },
296 1.98 martin { DDB_ADD_CMD("dwatch", db_deletewatch_cmd, 0,
297 1.98 martin "Delete the watchpoint.", "address",NULL) },
298 1.98 martin { DDB_ADD_CMD("examine", db_examine_cmd, CS_SET_DOT,
299 1.98 martin "Display the address locations.",
300 1.98 martin "[/modifier] address[,count]",NULL) },
301 1.98 martin { DDB_ADD_CMD("help", db_help_print_cmd, CS_OWN|CS_NOREPEAT,
302 1.98 martin "Display help about commands",
303 1.98 martin "Use other commands as arguments.",NULL) },
304 1.98 martin { DDB_ADD_CMD("kill", db_kill_proc, CS_OWN,
305 1.98 martin "Send a signal to the process","pid[,signal_number]",
306 1.98 martin " pid:\t\t\tthe process id (may need 0t prefix for decimal)\n"
307 1.98 martin " signal_number:\tthe signal to send") },
308 1.69 briggs #ifdef KGDB
309 1.99 martin { DDB_ADD_CMD("kgdb", db_kgdb_cmd, 0, NULL,NULL,NULL) },
310 1.69 briggs #endif
311 1.98 martin { DDB_ADD_CMD("machine",NULL,CS_MACH,
312 1.98 martin "Architecture specific functions.",NULL,NULL) },
313 1.98 martin { DDB_ADD_CMD("match", db_trace_until_matching_cmd,0,
314 1.98 martin "Stop at the matching return instruction.","See help next",NULL) },
315 1.98 martin { DDB_ADD_CMD("next", db_trace_until_matching_cmd,0,
316 1.98 martin "Stop at the matching return instruction.","[/p]",NULL) },
317 1.98 martin { DDB_ADD_CMD("p", db_print_cmd, 0,
318 1.98 martin "Print address according to the format.",
319 1.98 martin "[/axzodurc] address [address ...]",NULL) },
320 1.98 martin { DDB_ADD_CMD("print", db_print_cmd, 0,
321 1.98 martin "Print address according to the format.",
322 1.98 martin "[/axzodurc] address [address ...]",NULL) },
323 1.98 martin { DDB_ADD_CMD("ps", db_show_all_procs, 0,
324 1.98 martin "Print all processes.","See show all procs",NULL) },
325 1.98 martin { DDB_ADD_CMD("reboot", db_reboot_cmd, CS_OWN,
326 1.98 martin "Reboot","0x1 RB_ASKNAME, 0x2 RB_SINGLE, 0x4 RB_NOSYNC, 0x8 RB_HALT,"
327 1.98 martin "0x40 RB_KDB, 0x100 RB_DUMP, 0x808 RB_POWERDOWN",NULL) },
328 1.98 martin { DDB_ADD_CMD("s", db_single_step_cmd, 0,
329 1.98 martin "Single-step count times.","[/p] [,count]",NULL) },
330 1.98 martin { DDB_ADD_CMD("search", db_search_cmd, CS_OWN|CS_SET_DOT,
331 1.98 martin "Search memory from address for value.",
332 1.98 martin "[/bhl] address value [mask] [,count]",NULL) },
333 1.98 martin { DDB_ADD_CMD("set", db_set_cmd, CS_OWN,
334 1.98 martin "Set the named variable","$variable [=] expression",NULL) },
335 1.107 martin { DDB_ADD_CMD("show", NULL, CS_SHOW,
336 1.98 martin "Show kernel stats.", NULL,NULL) },
337 1.98 martin { DDB_ADD_CMD("sifting", db_sifting_cmd, CS_OWN,
338 1.98 martin "Search the symbol tables ","[/F] string",NULL) },
339 1.98 martin { DDB_ADD_CMD("step", db_single_step_cmd, 0,
340 1.98 martin "Single-step count times.","[/p] [,count]",NULL) },
341 1.98 martin { DDB_ADD_CMD("sync", db_sync_cmd, CS_OWN,
342 1.98 martin "Force a crash dump, and then reboot.",NULL,NULL) },
343 1.98 martin { DDB_ADD_CMD("trace", db_stack_trace_cmd, 0,
344 1.98 martin "Stack trace from frame-address.",
345 1.98 martin "[/u[l]] [frame-address][,count]",NULL) },
346 1.98 martin { DDB_ADD_CMD("until", db_trace_until_call_cmd,0,
347 1.98 martin "Stop at the next call or return instruction.","[/p]",NULL) },
348 1.98 martin { DDB_ADD_CMD("w", db_write_cmd, CS_MORE|CS_SET_DOT,
349 1.114 uwe "Write the expressions at succeeding locations.",
350 1.114 uwe "[/bhl] address expression [expression ...]",NULL) },
351 1.98 martin { DDB_ADD_CMD("watch", db_watchpoint_cmd, CS_MORE,
352 1.98 martin "Set a watchpoint for a region. ","address[,size]",NULL) },
353 1.112 yamt { DDB_ADD_CMD("whatis", db_whatis_cmd, 0,
354 1.112 yamt "Describe what an address is", "address", NULL) },
355 1.98 martin { DDB_ADD_CMD("write", db_write_cmd, CS_MORE|CS_SET_DOT,
356 1.98 martin "Write the expressions at succeeding locations.",
357 1.98 martin "[/bhl] address expression [expression ...]",NULL) },
358 1.98 martin { DDB_ADD_CMD("x", db_examine_cmd, CS_SET_DOT,
359 1.98 martin "Display the address locations.",
360 1.98 martin "[/modifier] address[,count]",NULL) },
361 1.98 martin { DDB_ADD_CMD(NULL, NULL, 0, NULL, NULL, NULL) }
362 1.64 simonb };
363 1.64 simonb
364 1.64 simonb static const struct db_command *db_last_command = NULL;
365 1.80 yamt #if defined(DDB_COMMANDONENTER)
366 1.81 yamt char db_cmd_on_enter[DB_LINE_MAXLEN + 1] = ___STRING(DDB_COMMANDONENTER);
367 1.81 yamt #else /* defined(DDB_COMMANDONENTER) */
368 1.81 yamt char db_cmd_on_enter[DB_LINE_MAXLEN + 1] = "";
369 1.80 yamt #endif /* defined(DDB_COMMANDONENTER) */
370 1.80 yamt #define DB_LINE_SEP ';'
371 1.1 cgd
372 1.1 cgd /*
373 1.1 cgd * Utility routine - discard tokens through end-of-line.
374 1.1 cgd */
375 1.1 cgd void
376 1.64 simonb db_skip_to_eol(void)
377 1.1 cgd {
378 1.64 simonb int t;
379 1.64 simonb
380 1.1 cgd do {
381 1.64 simonb t = db_read_token();
382 1.1 cgd } while (t != tEOL);
383 1.1 cgd }
384 1.1 cgd
385 1.64 simonb void
386 1.89 uwe db_error(const char *s)
387 1.64 simonb {
388 1.64 simonb
389 1.64 simonb if (s)
390 1.64 simonb db_printf("%s", s);
391 1.64 simonb db_flush_lex();
392 1.64 simonb longjmp(db_recover);
393 1.64 simonb }
394 1.64 simonb
395 1.98 martin /*Execute commandlist after ddb start
396 1.98 martin *This function goes through the command list created from commands and ';'
397 1.98 martin */
398 1.98 martin
399 1.81 yamt static void
400 1.81 yamt db_execute_commandlist(const char *cmdlist)
401 1.81 yamt {
402 1.81 yamt const char *cmd = cmdlist;
403 1.81 yamt const struct db_command *dummy = NULL;
404 1.81 yamt
405 1.81 yamt while (*cmd != '\0') {
406 1.81 yamt const char *ep = cmd;
407 1.81 yamt
408 1.81 yamt while (*ep != '\0' && *ep != DB_LINE_SEP) {
409 1.81 yamt ep++;
410 1.81 yamt }
411 1.81 yamt db_set_line(cmd, ep);
412 1.98 martin db_command(&dummy);
413 1.81 yamt cmd = ep;
414 1.81 yamt if (*cmd == DB_LINE_SEP) {
415 1.81 yamt cmd++;
416 1.81 yamt }
417 1.81 yamt }
418 1.81 yamt }
419 1.81 yamt
420 1.98 martin /*Initialize ddb command tables*/
421 1.102 martin void
422 1.98 martin db_init_commands(void)
423 1.98 martin {
424 1.101 martin static bool done = false;
425 1.98 martin
426 1.101 martin if (done) return;
427 1.101 martin done = true;
428 1.98 martin
429 1.103 martin /* register command tables */
430 1.103 martin (void)db_register_tbl_entry(DDB_BASE_CMD, &db_base_cmd_builtins);
431 1.98 martin #ifdef DB_MACHINE_COMMANDS
432 1.103 martin (void)db_register_tbl_entry(DDB_MACH_CMD, &db_mach_cmd_builtins);
433 1.98 martin #endif
434 1.103 martin (void)db_register_tbl_entry(DDB_SHOW_CMD, &db_show_cmd_builtins);
435 1.98 martin }
436 1.98 martin
437 1.98 martin
438 1.98 martin /*
439 1.98 martin * Add command table to the specified list
440 1.98 martin * Arg:
441 1.98 martin * int type specifies type of command table DDB_SHOW_CMD|DDB_BASE_CMD|DDB_MAC_CMD
442 1.98 martin * *cmd_tbl poiter to static allocated db_command table
443 1.98 martin *
444 1.98 martin *Command table must be NULL terminated array of struct db_command
445 1.98 martin */
446 1.98 martin int
447 1.98 martin db_register_tbl(uint8_t type, const struct db_command *cmd_tbl)
448 1.98 martin {
449 1.98 martin struct db_cmd_tbl_en *list_ent;
450 1.103 martin
451 1.103 martin if (cmd_tbl->name == 0)
452 1.103 martin /* empty list - ignore */
453 1.103 martin return 0;
454 1.103 martin
455 1.105 martin /* force builtin commands to be registered first */
456 1.105 martin db_init_commands();
457 1.105 martin
458 1.105 martin /* now create a list entry for this table */
459 1.103 martin list_ent = malloc(sizeof(struct db_cmd_tbl_en), M_TEMP, M_ZERO);
460 1.103 martin if (list_ent == NULL)
461 1.103 martin return ENOMEM;
462 1.105 martin list_ent->db_cmd=cmd_tbl;
463 1.103 martin
464 1.105 martin /* and register it */
465 1.103 martin return db_register_tbl_entry(type, list_ent);
466 1.103 martin }
467 1.103 martin
468 1.103 martin static int
469 1.103 martin db_register_tbl_entry(uint8_t type, struct db_cmd_tbl_en *list_ent)
470 1.103 martin {
471 1.98 martin struct db_cmd_tbl_en_head *list;
472 1.98 martin
473 1.103 martin switch(type) {
474 1.103 martin case DDB_BASE_CMD:
475 1.103 martin list = &db_base_cmd_list;
476 1.103 martin break;
477 1.103 martin case DDB_SHOW_CMD:
478 1.103 martin list = &db_show_cmd_list;
479 1.103 martin break;
480 1.103 martin case DDB_MACH_CMD:
481 1.103 martin list = &db_mach_cmd_list;
482 1.103 martin break;
483 1.103 martin default:
484 1.103 martin return ENOENT;
485 1.98 martin }
486 1.103 martin
487 1.105 martin TAILQ_INSERT_TAIL(list, list_ent, db_cmd_next);
488 1.103 martin
489 1.98 martin return 0;
490 1.98 martin }
491 1.103 martin
492 1.98 martin /*
493 1.103 martin * Remove command table specified with db_cmd address == cmd_tbl
494 1.98 martin */
495 1.98 martin int
496 1.98 martin db_unregister_tbl(uint8_t type,const struct db_command *cmd_tbl)
497 1.98 martin {
498 1.98 martin struct db_cmd_tbl_en *list_ent;
499 1.98 martin struct db_cmd_tbl_en_head *list;
500 1.98 martin
501 1.103 martin /* find list on which the entry should live */
502 1.103 martin switch (type) {
503 1.98 martin case DDB_BASE_CMD:
504 1.98 martin list=&db_base_cmd_list;
505 1.98 martin break;
506 1.98 martin case DDB_SHOW_CMD:
507 1.98 martin list=&db_show_cmd_list;
508 1.98 martin break;
509 1.98 martin case DDB_MACH_CMD:
510 1.98 martin list=&db_mach_cmd_list;
511 1.98 martin break;
512 1.98 martin default:
513 1.103 martin return EINVAL;
514 1.98 martin }
515 1.103 martin
516 1.103 martin TAILQ_FOREACH (list_ent,list,db_cmd_next) {
517 1.98 martin if (list_ent->db_cmd == cmd_tbl){
518 1.98 martin TAILQ_REMOVE(list,
519 1.98 martin list_ent,db_cmd_next);
520 1.98 martin free(list_ent,M_TEMP);
521 1.105 martin return 0;
522 1.98 martin }
523 1.103 martin }
524 1.105 martin return ENOENT;
525 1.116 blymn }
526 1.103 martin
527 1.98 martin /*This function is called from machine trap code.*/
528 1.64 simonb void
529 1.64 simonb db_command_loop(void)
530 1.64 simonb {
531 1.116 blymn
532 1.64 simonb label_t db_jmpbuf;
533 1.64 simonb label_t *savejmp;
534 1.64 simonb
535 1.64 simonb /*
536 1.64 simonb * Initialize 'prev' and 'next' to dot.
537 1.64 simonb */
538 1.64 simonb db_prev = db_dot;
539 1.64 simonb db_next = db_dot;
540 1.64 simonb
541 1.102 martin db_cmd_loop_done = false;
542 1.64 simonb
543 1.101 martin /*Init default command tables add machine, base,
544 1.101 martin show command tables to the list*/
545 1.102 martin db_init_commands();
546 1.101 martin
547 1.98 martin /*save context for return from ddb*/
548 1.64 simonb savejmp = db_recover;
549 1.64 simonb db_recover = &db_jmpbuf;
550 1.64 simonb (void) setjmp(&db_jmpbuf);
551 1.64 simonb
552 1.98 martin /*Execute default ddb start commands*/
553 1.81 yamt db_execute_commandlist(db_cmd_on_enter);
554 1.80 yamt
555 1.106 martin (void) setjmp(&db_jmpbuf);
556 1.64 simonb while (!db_cmd_loop_done) {
557 1.64 simonb if (db_print_position() != 0)
558 1.64 simonb db_printf("\n");
559 1.64 simonb db_output_line = 0;
560 1.64 simonb
561 1.64 simonb
562 1.64 simonb #ifdef MULTIPROCESSOR
563 1.64 simonb db_printf("db{%ld}> ", (long)cpu_number());
564 1.64 simonb #else
565 1.64 simonb db_printf("db> ");
566 1.64 simonb #endif
567 1.64 simonb (void) db_read_line();
568 1.64 simonb
569 1.98 martin db_command(&db_last_command);
570 1.64 simonb }
571 1.64 simonb
572 1.64 simonb db_recover = savejmp;
573 1.64 simonb }
574 1.1 cgd
575 1.1 cgd /*
576 1.98 martin * Search for command table for command prefix
577 1.108 uwe * ret: CMD_UNIQUE -> completely matches command
578 1.108 uwe * CMD_FOUND -> matches prefix of single command
579 1.108 uwe * CMD_AMBIGIOUS -> matches prefix of more than one command
580 1.108 uwe * CMD_NONE -> command not found
581 1.1 cgd */
582 1.64 simonb static int
583 1.98 martin db_cmd_search(const char *name,const struct db_command *table,
584 1.64 simonb const struct db_command **cmdp)
585 1.1 cgd {
586 1.116 blymn
587 1.53 jdolecek const struct db_command *cmd;
588 1.108 uwe int result;
589 1.1 cgd
590 1.108 uwe result = CMD_NONE;
591 1.110 martin *cmdp = NULL;
592 1.1 cgd for (cmd = table; cmd->name != 0; cmd++) {
593 1.64 simonb const char *lp;
594 1.64 simonb const char *rp;
595 1.64 simonb
596 1.64 simonb lp = name;
597 1.64 simonb rp = cmd->name;
598 1.108 uwe while (*lp != '\0' && *lp == *rp) {
599 1.107 martin rp++;
600 1.64 simonb lp++;
601 1.64 simonb }
602 1.108 uwe
603 1.108 uwe if (*lp != '\0') /* mismatch or extra chars in name */
604 1.108 uwe continue;
605 1.108 uwe
606 1.108 uwe if (*rp == '\0') { /* complete match */
607 1.107 martin *cmdp = cmd;
608 1.107 martin return (CMD_UNIQUE);
609 1.107 martin }
610 1.108 uwe
611 1.108 uwe /* prefix match: end of name, not end of command */
612 1.108 uwe if (result == CMD_NONE) {
613 1.108 uwe result = CMD_FOUND;
614 1.108 uwe *cmdp = cmd;
615 1.108 uwe }
616 1.108 uwe else if (result == CMD_FOUND) {
617 1.108 uwe result = CMD_AMBIGUOUS;
618 1.108 uwe *cmdp = NULL;
619 1.1 cgd }
620 1.1 cgd }
621 1.108 uwe
622 1.1 cgd return (result);
623 1.1 cgd }
624 1.1 cgd
625 1.98 martin /*
626 1.98 martin *List commands to the console.
627 1.98 martin */
628 1.64 simonb static void
629 1.98 martin db_cmd_list(const struct db_cmd_tbl_en_head *list)
630 1.1 cgd {
631 1.98 martin
632 1.98 martin struct db_cmd_tbl_en *list_ent;
633 1.98 martin const struct db_command *table;
634 1.105 martin size_t i, j, w, columns, lines, numcmds, width=0;
635 1.53 jdolecek const char *p;
636 1.1 cgd
637 1.105 martin TAILQ_FOREACH(list_ent,list,db_cmd_next) {
638 1.105 martin table = list_ent->db_cmd;
639 1.105 martin for (i = 0; table[i].name != NULL; i++) {
640 1.98 martin w = strlen(table[i].name);
641 1.98 martin if (w > width)
642 1.98 martin width = w;
643 1.98 martin }
644 1.32 lukem }
645 1.98 martin
646 1.32 lukem width = DB_NEXT_TAB(width);
647 1.32 lukem
648 1.32 lukem columns = db_max_width / width;
649 1.32 lukem if (columns == 0)
650 1.32 lukem columns = 1;
651 1.98 martin
652 1.105 martin TAILQ_FOREACH(list_ent,list,db_cmd_next) {
653 1.105 martin table = list_ent->db_cmd;
654 1.98 martin
655 1.105 martin for (numcmds = 0; table[numcmds].name != NULL; numcmds++)
656 1.105 martin ;
657 1.105 martin lines = (numcmds + columns - 1) / columns;
658 1.116 blymn
659 1.98 martin for (i = 0; i < lines; i++) {
660 1.98 martin for (j = 0; j < columns; j++) {
661 1.98 martin p = table[j * lines + i].name;
662 1.98 martin if (p)
663 1.98 martin db_printf("%s", p);
664 1.105 martin if (j * lines + i + lines >= numcmds) {
665 1.98 martin db_putchar('\n');
666 1.98 martin break;
667 1.98 martin }
668 1.98 martin if (p) {
669 1.98 martin w = strlen(p);
670 1.98 martin while (w < width) {
671 1.98 martin w = DB_NEXT_TAB(w);
672 1.98 martin db_putchar('\t');
673 1.98 martin }
674 1.98 martin }
675 1.98 martin }
676 1.98 martin }
677 1.98 martin }
678 1.98 martin return;
679 1.98 martin }
680 1.98 martin
681 1.98 martin /*
682 1.98 martin *Returns type of list for command with name *name.
683 1.98 martin */
684 1.98 martin static int
685 1.98 martin db_get_list_type(const char *name)
686 1.98 martin {
687 1.98 martin
688 1.98 martin const struct db_command *cmd;
689 1.98 martin struct db_cmd_tbl_en *list_ent;
690 1.98 martin int error,ret=-1;
691 1.98 martin
692 1.105 martin /* search for the command name */
693 1.105 martin TAILQ_FOREACH(list_ent,&db_base_cmd_list,db_cmd_next) {
694 1.105 martin /*
695 1.105 martin * cmd_search returns CMD_UNIQUE, CMD_FOUND ...
696 1.105 martin * CMD_UNIQUE when name was completly matched to cmd->name
697 1.105 martin * CMD_FOUND when name was only partially matched to cmd->name
698 1.105 martin * CMD_NONE command not found in a list
699 1.105 martin * CMD_AMBIGIOUS ->more partialy matches
700 1.98 martin */
701 1.98 martin
702 1.105 martin error = db_cmd_search(name, list_ent->db_cmd, &cmd);
703 1.105 martin
704 1.105 martin if (error == CMD_UNIQUE) {
705 1.105 martin /* exact match found */
706 1.105 martin if (cmd->flag == CS_SHOW) {
707 1.105 martin ret = DDB_SHOW_CMD;
708 1.32 lukem break;
709 1.32 lukem }
710 1.105 martin if (cmd->flag == CS_MACH) {
711 1.105 martin ret = DDB_MACH_CMD;
712 1.98 martin break;
713 1.98 martin } else {
714 1.105 martin ret = DDB_BASE_CMD;
715 1.98 martin break;
716 1.32 lukem }
717 1.105 martin
718 1.111 martin } else if (error == CMD_FOUND) {
719 1.105 martin /*
720 1.105 martin * partial match, search will continue, but
721 1.105 martin * note current result in case we won't
722 1.105 martin * find anything better.
723 1.105 martin */
724 1.98 martin if (cmd->flag == CS_SHOW)
725 1.105 martin ret = DDB_SHOW_CMD;
726 1.111 martin else if (cmd->flag == CS_MACH)
727 1.105 martin ret = DDB_MACH_CMD;
728 1.98 martin else
729 1.105 martin ret = DDB_BASE_CMD;
730 1.32 lukem }
731 1.1 cgd }
732 1.102 martin
733 1.105 martin return ret;
734 1.1 cgd }
735 1.1 cgd
736 1.98 martin /*
737 1.98 martin *Parse command line and execute apropriate function.
738 1.98 martin */
739 1.64 simonb static void
740 1.98 martin db_command(const struct db_command **last_cmdp)
741 1.1 cgd {
742 1.98 martin const struct db_command *command;
743 1.98 martin struct db_cmd_tbl_en *list_ent;
744 1.98 martin struct db_cmd_tbl_en_head *list;
745 1.116 blymn
746 1.1 cgd int t;
747 1.98 martin int result;
748 1.116 blymn
749 1.1 cgd char modif[TOK_STRING_SIZE];
750 1.1 cgd db_expr_t addr, count;
751 1.95 thorpej bool have_addr = false;
752 1.98 martin
753 1.87 he static db_expr_t last_count = 0;
754 1.116 blymn
755 1.98 martin command = NULL; /* XXX gcc */
756 1.86 mrg
757 1.1 cgd t = db_read_token();
758 1.38 jhawk if ((t == tEOL) || (t == tCOMMA)) {
759 1.1 cgd /*
760 1.64 simonb * An empty line repeats last command, at 'next'.
761 1.64 simonb * Only a count repeats the last command with the new count.
762 1.64 simonb */
763 1.98 martin command = *last_cmdp;
764 1.98 martin
765 1.98 martin if (!command)
766 1.98 martin return;
767 1.98 martin
768 1.64 simonb addr = (db_expr_t)db_next;
769 1.64 simonb if (t == tCOMMA) {
770 1.64 simonb if (!db_expression(&count)) {
771 1.64 simonb db_printf("Count missing\n");
772 1.64 simonb db_flush_lex();
773 1.64 simonb return;
774 1.64 simonb }
775 1.64 simonb } else
776 1.64 simonb count = last_count;
777 1.95 thorpej have_addr = false;
778 1.64 simonb modif[0] = '\0';
779 1.64 simonb db_skip_to_eol();
780 1.98 martin
781 1.64 simonb } else if (t == tEXCL) {
782 1.64 simonb db_fncall(0, 0, 0, NULL);
783 1.64 simonb return;
784 1.98 martin
785 1.64 simonb } else if (t != tIDENT) {
786 1.64 simonb db_printf("?\n");
787 1.64 simonb db_flush_lex();
788 1.64 simonb return;
789 1.98 martin
790 1.64 simonb } else {
791 1.98 martin
792 1.98 martin switch(db_get_list_type(db_tok_string)) {
793 1.98 martin
794 1.98 martin case DDB_BASE_CMD:
795 1.107 martin list = &db_base_cmd_list;
796 1.98 martin break;
797 1.107 martin
798 1.98 martin case DDB_SHOW_CMD:
799 1.107 martin list = &db_show_cmd_list;
800 1.98 martin /* need to read show subcommand if show command list
801 1.98 martin is used. */
802 1.107 martin t = db_read_token();
803 1.98 martin
804 1.98 martin if (t != tIDENT) {
805 1.98 martin /* if only show command is executed, print
806 1.98 martin all subcommands */
807 1.116 blymn db_cmd_list(list);
808 1.64 simonb db_flush_lex();
809 1.64 simonb return;
810 1.98 martin }
811 1.98 martin break;
812 1.98 martin case DDB_MACH_CMD:
813 1.107 martin list = &db_mach_cmd_list;
814 1.98 martin /* need to read machine subcommand if
815 1.98 martin machine level 2 command list is used. */
816 1.98 martin t = db_read_token();
817 1.98 martin
818 1.98 martin if (t != tIDENT) {
819 1.98 martin /* if only show command is executed, print
820 1.98 martin all subcommands */
821 1.98 martin db_cmd_list(list);
822 1.64 simonb db_flush_lex();
823 1.64 simonb return;
824 1.116 blymn }
825 1.98 martin break;
826 1.98 martin default:
827 1.98 martin db_printf("No such command\n");
828 1.116 blymn db_flush_lex();
829 1.98 martin return;
830 1.98 martin }
831 1.98 martin
832 1.98 martin COMPAT_RET:
833 1.107 martin TAILQ_FOREACH(list_ent, list, db_cmd_next) {
834 1.98 martin result = db_cmd_search(db_tok_string, list_ent->db_cmd,
835 1.98 martin &command);
836 1.98 martin
837 1.98 martin /* after CMD_UNIQUE in cmd_list only a single command
838 1.98 martin name is possible */
839 1.98 martin if (result == CMD_UNIQUE)
840 1.64 simonb break;
841 1.98 martin
842 1.98 martin }
843 1.101 martin
844 1.107 martin /* check compatibility flag */
845 1.101 martin if (command && command->flag & CS_COMPAT){
846 1.98 martin t = db_read_token();
847 1.98 martin if (t != tIDENT) {
848 1.98 martin db_cmd_list(list);
849 1.64 simonb db_flush_lex();
850 1.64 simonb return;
851 1.64 simonb }
852 1.1 cgd
853 1.98 martin /* support only level 2 commands here */
854 1.98 martin goto COMPAT_RET;
855 1.101 martin }
856 1.101 martin
857 1.101 martin if (!command) {
858 1.101 martin db_printf("No such command\n");
859 1.101 martin db_flush_lex();
860 1.101 martin return;
861 1.101 martin }
862 1.98 martin
863 1.98 martin if ((command->flag & CS_OWN) == 0) {
864 1.98 martin
865 1.64 simonb /*
866 1.64 simonb * Standard syntax:
867 1.64 simonb * command [/modifier] [addr] [,count]
868 1.64 simonb */
869 1.98 martin t = db_read_token(); /* get modifier */
870 1.116 blymn if (t == tSLASH) {
871 1.64 simonb t = db_read_token();
872 1.64 simonb if (t != tIDENT) {
873 1.64 simonb db_printf("Bad modifier\n");
874 1.64 simonb db_flush_lex();
875 1.64 simonb return;
876 1.64 simonb }
877 1.98 martin /* save modifier */
878 1.71 itojun strlcpy(modif, db_tok_string, sizeof(modif));
879 1.116 blymn
880 1.64 simonb } else {
881 1.64 simonb db_unread_token(t);
882 1.64 simonb modif[0] = '\0';
883 1.64 simonb }
884 1.64 simonb
885 1.98 martin if (db_expression(&addr)) { /*get address*/
886 1.64 simonb db_dot = (db_addr_t) addr;
887 1.64 simonb db_last_addr = db_dot;
888 1.95 thorpej have_addr = true;
889 1.64 simonb } else {
890 1.64 simonb addr = (db_expr_t) db_dot;
891 1.95 thorpej have_addr = false;
892 1.64 simonb }
893 1.98 martin
894 1.64 simonb t = db_read_token();
895 1.98 martin if (t == tCOMMA) { /*Get count*/
896 1.64 simonb if (!db_expression(&count)) {
897 1.64 simonb db_printf("Count missing\n");
898 1.64 simonb db_flush_lex();
899 1.64 simonb return;
900 1.64 simonb }
901 1.116 blymn } else {
902 1.64 simonb db_unread_token(t);
903 1.64 simonb count = -1;
904 1.64 simonb }
905 1.98 martin if ((command->flag & CS_MORE) == 0) {
906 1.64 simonb db_skip_to_eol();
907 1.64 simonb }
908 1.1 cgd }
909 1.1 cgd }
910 1.98 martin
911 1.98 martin if (command->flag & CS_NOREPEAT) {
912 1.98 martin *last_cmdp = NULL;
913 1.98 martin last_count = 0;
914 1.98 martin } else {
915 1.98 martin *last_cmdp = command;
916 1.98 martin last_count = count;
917 1.98 martin }
918 1.98 martin
919 1.98 martin if (command != NULL) {
920 1.1 cgd /*
921 1.64 simonb * Execute the command.
922 1.1 cgd */
923 1.107 martin if (command->fcn != NULL)
924 1.107 martin (*command->fcn)(addr, have_addr, count, modif);
925 1.64 simonb
926 1.98 martin if (command->flag & CS_SET_DOT) {
927 1.64 simonb /*
928 1.64 simonb * If command changes dot, set dot to
929 1.64 simonb * previous address displayed (if 'ed' style).
930 1.64 simonb */
931 1.64 simonb if (db_ed_style)
932 1.64 simonb db_dot = db_prev;
933 1.64 simonb else
934 1.64 simonb db_dot = db_next;
935 1.64 simonb } else {
936 1.64 simonb /*
937 1.64 simonb * If command does not change dot,
938 1.64 simonb * set 'next' location to be the same.
939 1.64 simonb */
940 1.64 simonb db_next = db_dot;
941 1.1 cgd }
942 1.1 cgd }
943 1.1 cgd }
944 1.1 cgd
945 1.98 martin /*
946 1.98 martin * Print help for commands
947 1.98 martin */
948 1.98 martin static void
949 1.98 martin db_help_print_cmd(db_expr_t addr, bool have_addr, db_expr_t count,
950 1.98 martin const char *modif)
951 1.98 martin {
952 1.116 blymn
953 1.98 martin const struct db_cmd_tbl_en_head *list;
954 1.98 martin const struct db_cmd_tbl_en *list_ent;
955 1.110 martin const struct db_command *help = NULL;
956 1.98 martin int t, result;
957 1.116 blymn
958 1.98 martin t = db_read_token();
959 1.98 martin /* is there another command after the "help"? */
960 1.98 martin if (t == tIDENT){
961 1.98 martin
962 1.110 martin switch(db_get_list_type(db_tok_string)) {
963 1.98 martin
964 1.98 martin case DDB_BASE_CMD:
965 1.98 martin list=&db_base_cmd_list;
966 1.98 martin break;
967 1.98 martin case DDB_SHOW_CMD:
968 1.98 martin list=&db_show_cmd_list;
969 1.98 martin /* read the show subcommand */
970 1.116 blymn t = db_read_token();
971 1.98 martin
972 1.98 martin if (t != tIDENT) {
973 1.98 martin /* no subcommand, print the list */
974 1.98 martin db_cmd_list(list);
975 1.98 martin db_flush_lex();
976 1.98 martin return;
977 1.116 blymn }
978 1.116 blymn
979 1.98 martin break;
980 1.98 martin case DDB_MACH_CMD:
981 1.98 martin list=&db_mach_cmd_list;
982 1.98 martin /* read machine subcommand */
983 1.116 blymn t = db_read_token();
984 1.98 martin
985 1.98 martin if (t != tIDENT) {
986 1.98 martin /* no subcommand - just print the list */
987 1.98 martin db_cmd_list(list);
988 1.98 martin db_flush_lex();
989 1.98 martin return;
990 1.98 martin }
991 1.98 martin break;
992 1.103 martin
993 1.98 martin default:
994 1.98 martin db_printf("No such command\n");
995 1.98 martin db_flush_lex();
996 1.98 martin return;
997 1.98 martin }
998 1.116 blymn COMPAT_RET:
999 1.98 martin TAILQ_FOREACH(list_ent,list,db_cmd_next){
1000 1.98 martin result = db_cmd_search(db_tok_string, list_ent->db_cmd,
1001 1.98 martin &help);
1002 1.98 martin /* after CMD_UNIQUE only a single command
1003 1.98 martin name is possible */
1004 1.98 martin if (result == CMD_UNIQUE)
1005 1.98 martin break;
1006 1.98 martin }
1007 1.98 martin #ifdef DDB_VERBOSE_HELP
1008 1.98 martin /*print help*/
1009 1.98 martin
1010 1.98 martin db_printf("Command: %s\n",help->name);
1011 1.98 martin
1012 1.98 martin if (help->cmd_descr != NULL)
1013 1.98 martin db_printf(" Description: %s\n",help->cmd_descr);
1014 1.116 blymn
1015 1.98 martin if (help->cmd_arg != NULL)
1016 1.98 martin db_printf(" Arguments: %s\n",help->cmd_arg);
1017 1.98 martin
1018 1.98 martin if (help->cmd_arg_help != NULL)
1019 1.98 martin db_printf(" Arguments description:\n%s\n",
1020 1.98 martin help->cmd_arg_help);
1021 1.98 martin
1022 1.98 martin if ((help->cmd_arg == NULL) && (help->cmd_descr == NULL))
1023 1.98 martin db_printf("%s Doesn't have any help message included.\n",
1024 1.98 martin help->name);
1025 1.98 martin #endif
1026 1.98 martin /* check compatibility flag */
1027 1.98 martin /*
1028 1.98 martin * The "show all" command table has been merged with the
1029 1.98 martin * "show" command table - but we want to keep the old UI
1030 1.98 martin * available. So if we find a CS_COMPAT entry, we read
1031 1.98 martin * the next token and try again.
1032 1.98 martin */
1033 1.98 martin if (help->flag == CS_COMPAT){
1034 1.98 martin t = db_read_token();
1035 1.98 martin
1036 1.98 martin if (t != tIDENT){
1037 1.98 martin db_cmd_list(list);
1038 1.98 martin db_flush_lex();
1039 1.98 martin return;
1040 1.98 martin }
1041 1.98 martin
1042 1.98 martin goto COMPAT_RET;
1043 1.98 martin /* support only level 2 commands here */
1044 1.98 martin } else {
1045 1.98 martin db_skip_to_eol();
1046 1.98 martin }
1047 1.116 blymn
1048 1.98 martin } else /* t != tIDENT */
1049 1.98 martin /* print base commands */
1050 1.98 martin db_cmd_list(&db_base_cmd_list);
1051 1.116 blymn
1052 1.98 martin return;
1053 1.98 martin }
1054 1.110 martin
1055 1.4 brezak /*ARGSUSED*/
1056 1.64 simonb static void
1057 1.94 matt db_map_print_cmd(db_expr_t addr, bool have_addr, db_expr_t count,
1058 1.90 christos const char *modif)
1059 1.64 simonb {
1060 1.95 thorpej bool full = false;
1061 1.64 simonb
1062 1.64 simonb if (modif[0] == 'f')
1063 1.95 thorpej full = true;
1064 1.60 matt
1065 1.95 thorpej if (have_addr == false)
1066 1.66 scw addr = (db_expr_t)(intptr_t) kernel_map;
1067 1.4 brezak
1068 1.66 scw uvm_map_printit((struct vm_map *)(intptr_t) addr, full, db_printf);
1069 1.4 brezak }
1070 1.4 brezak
1071 1.4 brezak /*ARGSUSED*/
1072 1.64 simonb static void
1073 1.94 matt db_malloc_print_cmd(db_expr_t addr, bool have_addr,
1074 1.91 christos db_expr_t count, const char *modif)
1075 1.62 thorpej {
1076 1.64 simonb
1077 1.62 thorpej #ifdef MALLOC_DEBUG
1078 1.62 thorpej if (!have_addr)
1079 1.62 thorpej addr = 0;
1080 1.62 thorpej
1081 1.62 thorpej debug_malloc_printit(db_printf, (vaddr_t) addr);
1082 1.62 thorpej #else
1083 1.62 thorpej db_printf("The kernel is not built with the MALLOC_DEBUG option.\n");
1084 1.62 thorpej #endif /* MALLOC_DEBUG */
1085 1.62 thorpej }
1086 1.62 thorpej
1087 1.62 thorpej /*ARGSUSED*/
1088 1.64 simonb static void
1089 1.94 matt db_object_print_cmd(db_expr_t addr, bool have_addr,
1090 1.91 christos db_expr_t count, const char *modif)
1091 1.64 simonb {
1092 1.95 thorpej bool full = false;
1093 1.64 simonb
1094 1.64 simonb if (modif[0] == 'f')
1095 1.95 thorpej full = true;
1096 1.4 brezak
1097 1.66 scw uvm_object_printit((struct uvm_object *)(intptr_t) addr, full,
1098 1.66 scw db_printf);
1099 1.24 mrg }
1100 1.24 mrg
1101 1.24 mrg /*ARGSUSED*/
1102 1.64 simonb static void
1103 1.94 matt db_page_print_cmd(db_expr_t addr, bool have_addr,
1104 1.91 christos db_expr_t count, const char *modif)
1105 1.64 simonb {
1106 1.95 thorpej bool full = false;
1107 1.64 simonb
1108 1.64 simonb if (modif[0] == 'f')
1109 1.95 thorpej full = true;
1110 1.24 mrg
1111 1.66 scw uvm_page_printit((struct vm_page *)(intptr_t) addr, full, db_printf);
1112 1.36 chs }
1113 1.36 chs
1114 1.36 chs /*ARGSUSED*/
1115 1.64 simonb static void
1116 1.94 matt db_show_all_pages(db_expr_t addr, bool have_addr,
1117 1.91 christos db_expr_t count, const char *modif)
1118 1.84 bjh21 {
1119 1.84 bjh21
1120 1.84 bjh21 uvm_page_printall(db_printf);
1121 1.84 bjh21 }
1122 1.84 bjh21
1123 1.84 bjh21 /*ARGSUSED*/
1124 1.84 bjh21 static void
1125 1.94 matt db_buf_print_cmd(db_expr_t addr, bool have_addr,
1126 1.91 christos db_expr_t count, const char *modif)
1127 1.36 chs {
1128 1.95 thorpej bool full = false;
1129 1.64 simonb
1130 1.36 chs if (modif[0] == 'f')
1131 1.95 thorpej full = true;
1132 1.36 chs
1133 1.66 scw vfs_buf_print((struct buf *)(intptr_t) addr, full, db_printf);
1134 1.65 simonb }
1135 1.65 simonb
1136 1.65 simonb /*ARGSUSED*/
1137 1.65 simonb static void
1138 1.94 matt db_event_print_cmd(db_expr_t addr, bool have_addr,
1139 1.91 christos db_expr_t count, const char *modif)
1140 1.65 simonb {
1141 1.95 thorpej bool full = false;
1142 1.65 simonb
1143 1.65 simonb if (modif[0] == 'f')
1144 1.95 thorpej full = true;
1145 1.65 simonb
1146 1.65 simonb event_print(full, db_printf);
1147 1.36 chs }
1148 1.36 chs
1149 1.36 chs /*ARGSUSED*/
1150 1.64 simonb static void
1151 1.94 matt db_vnode_print_cmd(db_expr_t addr, bool have_addr,
1152 1.91 christos db_expr_t count, const char *modif)
1153 1.36 chs {
1154 1.95 thorpej bool full = false;
1155 1.64 simonb
1156 1.36 chs if (modif[0] == 'f')
1157 1.95 thorpej full = true;
1158 1.36 chs
1159 1.66 scw vfs_vnode_print((struct vnode *)(intptr_t) addr, full, db_printf);
1160 1.74 dbj }
1161 1.74 dbj
1162 1.74 dbj static void
1163 1.94 matt db_mount_print_cmd(db_expr_t addr, bool have_addr,
1164 1.91 christos db_expr_t count, const char *modif)
1165 1.74 dbj {
1166 1.95 thorpej bool full = false;
1167 1.74 dbj
1168 1.74 dbj if (modif[0] == 'f')
1169 1.95 thorpej full = true;
1170 1.74 dbj
1171 1.74 dbj vfs_mount_print((struct mount *)(intptr_t) addr, full, db_printf);
1172 1.4 brezak }
1173 1.4 brezak
1174 1.31 thorpej /*ARGSUSED*/
1175 1.64 simonb static void
1176 1.94 matt db_mbuf_print_cmd(db_expr_t addr, bool have_addr,
1177 1.91 christos db_expr_t count, const char *modif)
1178 1.83 yamt {
1179 1.83 yamt
1180 1.83 yamt m_print((const struct mbuf *)(intptr_t) addr, modif, db_printf);
1181 1.83 yamt }
1182 1.83 yamt
1183 1.83 yamt /*ARGSUSED*/
1184 1.83 yamt static void
1185 1.94 matt db_pool_print_cmd(db_expr_t addr, bool have_addr,
1186 1.91 christos db_expr_t count, const char *modif)
1187 1.31 thorpej {
1188 1.64 simonb
1189 1.66 scw pool_printit((struct pool *)(intptr_t) addr, modif, db_printf);
1190 1.51 chs }
1191 1.31 thorpej
1192 1.51 chs /*ARGSUSED*/
1193 1.64 simonb static void
1194 1.94 matt db_namecache_print_cmd(db_expr_t addr, bool have_addr,
1195 1.91 christos db_expr_t count, const char *modif)
1196 1.51 chs {
1197 1.64 simonb
1198 1.66 scw namecache_print((struct vnode *)(intptr_t) addr, db_printf);
1199 1.51 chs }
1200 1.51 chs
1201 1.51 chs /*ARGSUSED*/
1202 1.64 simonb static void
1203 1.94 matt db_uvmexp_print_cmd(db_expr_t addr, bool have_addr,
1204 1.91 christos db_expr_t count, const char *modif)
1205 1.51 chs {
1206 1.64 simonb
1207 1.51 chs uvmexp_print(db_printf);
1208 1.31 thorpej }
1209 1.31 thorpej
1210 1.92 ad /*ARGSUSED*/
1211 1.92 ad static void
1212 1.94 matt db_lock_print_cmd(db_expr_t addr, bool have_addr,
1213 1.92 ad db_expr_t count, const char *modif)
1214 1.92 ad {
1215 1.92 ad
1216 1.92 ad lockdebug_lock_print((void *)addr, db_printf);
1217 1.92 ad }
1218 1.92 ad
1219 1.1 cgd /*
1220 1.1 cgd * Call random function:
1221 1.1 cgd * !expr(arg,arg,arg)
1222 1.1 cgd */
1223 1.16 christos /*ARGSUSED*/
1224 1.64 simonb static void
1225 1.94 matt db_fncall(db_expr_t addr, bool have_addr,
1226 1.91 christos db_expr_t count, const char *modif)
1227 1.1 cgd {
1228 1.1 cgd db_expr_t fn_addr;
1229 1.1 cgd #define MAXARGS 11
1230 1.1 cgd db_expr_t args[MAXARGS];
1231 1.1 cgd int nargs = 0;
1232 1.1 cgd db_expr_t retval;
1233 1.64 simonb db_expr_t (*func)(db_expr_t, ...);
1234 1.1 cgd int t;
1235 1.1 cgd
1236 1.1 cgd if (!db_expression(&fn_addr)) {
1237 1.64 simonb db_printf("Bad function\n");
1238 1.64 simonb db_flush_lex();
1239 1.64 simonb return;
1240 1.1 cgd }
1241 1.66 scw func = (db_expr_t (*)(db_expr_t, ...))(intptr_t) fn_addr;
1242 1.1 cgd
1243 1.1 cgd t = db_read_token();
1244 1.1 cgd if (t == tLPAREN) {
1245 1.64 simonb if (db_expression(&args[0])) {
1246 1.64 simonb nargs++;
1247 1.64 simonb while ((t = db_read_token()) == tCOMMA) {
1248 1.64 simonb if (nargs == MAXARGS) {
1249 1.64 simonb db_printf("Too many arguments\n");
1250 1.64 simonb db_flush_lex();
1251 1.64 simonb return;
1252 1.64 simonb }
1253 1.64 simonb if (!db_expression(&args[nargs])) {
1254 1.64 simonb db_printf("Argument missing\n");
1255 1.64 simonb db_flush_lex();
1256 1.64 simonb return;
1257 1.64 simonb }
1258 1.64 simonb nargs++;
1259 1.64 simonb }
1260 1.64 simonb db_unread_token(t);
1261 1.64 simonb }
1262 1.64 simonb if (db_read_token() != tRPAREN) {
1263 1.64 simonb db_printf("?\n");
1264 1.1 cgd db_flush_lex();
1265 1.1 cgd return;
1266 1.1 cgd }
1267 1.1 cgd }
1268 1.1 cgd db_skip_to_eol();
1269 1.1 cgd
1270 1.1 cgd while (nargs < MAXARGS) {
1271 1.64 simonb args[nargs++] = 0;
1272 1.1 cgd }
1273 1.1 cgd
1274 1.1 cgd retval = (*func)(args[0], args[1], args[2], args[3], args[4],
1275 1.20 christos args[5], args[6], args[7], args[8], args[9]);
1276 1.45 jhawk db_printf("%s\n", db_num_to_str(retval));
1277 1.23 scottr }
1278 1.23 scottr
1279 1.64 simonb static void
1280 1.94 matt db_reboot_cmd(db_expr_t addr, bool have_addr,
1281 1.91 christos db_expr_t count, const char *modif)
1282 1.23 scottr {
1283 1.23 scottr db_expr_t bootflags;
1284 1.23 scottr
1285 1.23 scottr /* Flags, default to RB_AUTOBOOT */
1286 1.23 scottr if (!db_expression(&bootflags))
1287 1.23 scottr bootflags = (db_expr_t)RB_AUTOBOOT;
1288 1.23 scottr if (db_read_token() != tEOL) {
1289 1.64 simonb db_error("?\n");
1290 1.64 simonb /*NOTREACHED*/
1291 1.23 scottr }
1292 1.47 sommerfe /*
1293 1.47 sommerfe * We are leaving DDB, never to return upward.
1294 1.47 sommerfe * Clear db_recover so that we can debug faults in functions
1295 1.47 sommerfe * called from cpu_reboot.
1296 1.47 sommerfe */
1297 1.47 sommerfe db_recover = 0;
1298 1.23 scottr cpu_reboot((int)bootflags, NULL);
1299 1.41 jhawk }
1300 1.41 jhawk
1301 1.64 simonb static void
1302 1.94 matt db_sifting_cmd(db_expr_t addr, bool have_addr,
1303 1.91 christos db_expr_t count, const char *modif)
1304 1.41 jhawk {
1305 1.41 jhawk int mode, t;
1306 1.41 jhawk
1307 1.41 jhawk t = db_read_token();
1308 1.41 jhawk if (t == tSLASH) {
1309 1.41 jhawk t = db_read_token();
1310 1.41 jhawk if (t != tIDENT) {
1311 1.41 jhawk bad_modifier:
1312 1.41 jhawk db_printf("Bad modifier\n");
1313 1.41 jhawk db_flush_lex();
1314 1.41 jhawk return;
1315 1.41 jhawk }
1316 1.41 jhawk if (!strcmp(db_tok_string, "F"))
1317 1.41 jhawk mode = 'F';
1318 1.41 jhawk else
1319 1.41 jhawk goto bad_modifier;
1320 1.41 jhawk t = db_read_token();
1321 1.41 jhawk } else
1322 1.41 jhawk mode = 0;
1323 1.41 jhawk
1324 1.51 chs if (t == tIDENT)
1325 1.41 jhawk db_sifting(db_tok_string, mode);
1326 1.41 jhawk else {
1327 1.41 jhawk db_printf("Bad argument (non-string)\n");
1328 1.41 jhawk db_flush_lex();
1329 1.41 jhawk }
1330 1.43 jhawk }
1331 1.43 jhawk
1332 1.64 simonb static void
1333 1.94 matt db_stack_trace_cmd(db_expr_t addr, bool have_addr, db_expr_t count, const char *modif)
1334 1.43 jhawk {
1335 1.79 drochner register const char *cp = modif;
1336 1.70 atatat register char c;
1337 1.70 atatat void (*pr)(const char *, ...);
1338 1.70 atatat
1339 1.70 atatat pr = db_printf;
1340 1.70 atatat while ((c = *cp++) != 0)
1341 1.70 atatat if (c == 'l')
1342 1.70 atatat pr = printf;
1343 1.64 simonb
1344 1.43 jhawk if (count == -1)
1345 1.43 jhawk count = 65535;
1346 1.43 jhawk
1347 1.70 atatat db_stack_trace_print(addr, have_addr, count, modif, pr);
1348 1.32 lukem }
1349 1.32 lukem
1350 1.64 simonb static void
1351 1.94 matt db_sync_cmd(db_expr_t addr, bool have_addr,
1352 1.91 christos db_expr_t count, const char *modif)
1353 1.32 lukem {
1354 1.64 simonb
1355 1.47 sommerfe /*
1356 1.47 sommerfe * We are leaving DDB, never to return upward.
1357 1.47 sommerfe * Clear db_recover so that we can debug faults in functions
1358 1.47 sommerfe * called from cpu_reboot.
1359 1.47 sommerfe */
1360 1.47 sommerfe db_recover = 0;
1361 1.113 martin panicstr = "dump forced via kernel debugger";
1362 1.32 lukem cpu_reboot(RB_DUMP, NULL);
1363 1.1 cgd }
1364 1.112 yamt
1365 1.112 yamt /*
1366 1.112 yamt * Describe what an address is
1367 1.112 yamt */
1368 1.112 yamt void
1369 1.112 yamt db_whatis_cmd(db_expr_t address, bool have_addr,
1370 1.112 yamt db_expr_t count, const char *modif)
1371 1.112 yamt {
1372 1.112 yamt const uintptr_t addr = (uintptr_t)address;
1373 1.112 yamt
1374 1.112 yamt lwp_whatis(addr, db_printf);
1375 1.112 yamt pool_whatis(addr, db_printf);
1376 1.112 yamt vmem_whatis(addr, db_printf);
1377 1.112 yamt uvm_whatis(addr, db_printf);
1378 1.112 yamt }
1379