db_command.c revision 1.122 1 1.122 pooka /* $NetBSD: db_command.c,v 1.122 2008/11/16 19:34:29 pooka Exp $ */
2 1.64 simonb /*
3 1.1 cgd * Mach Operating System
4 1.1 cgd * Copyright (c) 1991,1990 Carnegie Mellon University
5 1.1 cgd * All Rights Reserved.
6 1.64 simonb *
7 1.1 cgd * Permission to use, copy, modify and distribute this software and its
8 1.1 cgd * documentation is hereby granted, provided that both the copyright
9 1.1 cgd * notice and this permission notice appear in all copies of the
10 1.1 cgd * software, derivative works or modified versions, and any portions
11 1.1 cgd * thereof, and that both notices appear in supporting documentation.
12 1.64 simonb *
13 1.30 pk * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
14 1.1 cgd * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
15 1.1 cgd * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
16 1.64 simonb *
17 1.1 cgd * Carnegie Mellon requests users of this software to return to
18 1.64 simonb *
19 1.1 cgd * Software Distribution Coordinator or Software.Distribution (at) CS.CMU.EDU
20 1.1 cgd * School of Computer Science
21 1.1 cgd * Carnegie Mellon University
22 1.1 cgd * Pittsburgh PA 15213-3890
23 1.64 simonb *
24 1.1 cgd * any improvements or extensions that they make and grant Carnegie the
25 1.1 cgd * rights to redistribute these changes.
26 1.1 cgd */
27 1.98 martin /*
28 1.98 martin * Copyright (c) 1996, 1997, 1998, 1999, 2002 The NetBSD Foundation, Inc.
29 1.98 martin * All rights reserved.
30 1.98 martin *
31 1.98 martin * This code is derived from software contributed to The NetBSD Foundation
32 1.98 martin * by Adam Hamsik.
33 1.98 martin *
34 1.98 martin * Redistribution and use in source and binary forms, with or without
35 1.98 martin * modification, are permitted provided that the following conditions
36 1.98 martin * are met:
37 1.98 martin * 1. Redistributions of source code must retain the above copyright
38 1.98 martin * notice, this list of conditions and the following disclaimer.
39 1.98 martin * 2. Redistributions in binary form must reproduce the above copyright
40 1.98 martin * notice, this list of conditions and the following disclaimer in the
41 1.98 martin * documentation and/or other materials provided with the distribution.
42 1.98 martin *
43 1.98 martin * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
44 1.98 martin * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
45 1.98 martin * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
46 1.98 martin * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
47 1.98 martin * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
48 1.98 martin * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
49 1.98 martin * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
50 1.98 martin * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
51 1.98 martin * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
52 1.98 martin * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
53 1.98 martin * POSSIBILITY OF SUCH DAMAGE.
54 1.98 martin */
55 1.25 mrg
56 1.63 lukem /*
57 1.63 lukem * Command dispatcher.
58 1.63 lukem */
59 1.63 lukem
60 1.63 lukem #include <sys/cdefs.h>
61 1.122 pooka __KERNEL_RCSID(0, "$NetBSD: db_command.c,v 1.122 2008/11/16 19:34:29 pooka Exp $");
62 1.63 lukem
63 1.121 ad #include "opt_aio.h"
64 1.27 tron #include "opt_ddb.h"
65 1.69 briggs #include "opt_kgdb.h"
66 1.40 jhawk #include "opt_inet.h"
67 1.118 skrll #include "opt_uvmhist.h"
68 1.80 yamt #include "opt_ddbparam.h"
69 1.5 mycroft
70 1.7 mycroft #include <sys/param.h>
71 1.18 christos #include <sys/systm.h>
72 1.23 scottr #include <sys/reboot.h>
73 1.65 simonb #include <sys/device.h>
74 1.112 yamt #include <sys/lwp.h>
75 1.65 simonb #include <sys/malloc.h>
76 1.83 yamt #include <sys/mbuf.h>
77 1.65 simonb #include <sys/namei.h>
78 1.65 simonb #include <sys/pool.h>
79 1.7 mycroft #include <sys/proc.h>
80 1.36 chs #include <sys/vnode.h>
81 1.112 yamt #include <sys/vmem.h>
82 1.92 ad #include <sys/lockdebug.h>
83 1.92 ad #include <sys/sleepq.h>
84 1.109 ad #include <sys/cpu.h>
85 1.122 pooka #include <sys/buf.h>
86 1.15 gwr
87 1.98 martin /*include queue macros*/
88 1.98 martin #include <sys/queue.h>
89 1.98 martin
90 1.1 cgd #include <machine/db_machdep.h> /* type definitions */
91 1.1 cgd
92 1.58 mrg #if defined(_KERNEL_OPT)
93 1.34 sommerfe #include "opt_multiprocessor.h"
94 1.34 sommerfe #endif
95 1.34 sommerfe
96 1.1 cgd #include <ddb/db_lex.h>
97 1.1 cgd #include <ddb/db_output.h>
98 1.10 pk #include <ddb/db_command.h>
99 1.16 christos #include <ddb/db_break.h>
100 1.16 christos #include <ddb/db_watch.h>
101 1.16 christos #include <ddb/db_run.h>
102 1.16 christos #include <ddb/db_variables.h>
103 1.16 christos #include <ddb/db_interface.h>
104 1.16 christos #include <ddb/db_sym.h>
105 1.16 christos #include <ddb/db_extern.h>
106 1.1 cgd
107 1.24 mrg #include <uvm/uvm_extern.h>
108 1.26 jonathan #include <uvm/uvm_ddb.h>
109 1.24 mrg
110 1.46 jhawk #include "arp.h"
111 1.46 jhawk
112 1.1 cgd /*
113 1.64 simonb * Results of command search.
114 1.64 simonb */
115 1.64 simonb #define CMD_UNIQUE 0
116 1.64 simonb #define CMD_FOUND 1
117 1.64 simonb #define CMD_NONE 2
118 1.64 simonb #define CMD_AMBIGUOUS 3
119 1.98 martin
120 1.64 simonb /*
121 1.1 cgd * Exported global variables
122 1.1 cgd */
123 1.93 thorpej bool db_cmd_loop_done;
124 1.17 gwr label_t *db_recover;
125 1.64 simonb db_addr_t db_dot;
126 1.64 simonb db_addr_t db_last_addr;
127 1.64 simonb db_addr_t db_prev;
128 1.64 simonb db_addr_t db_next;
129 1.1 cgd
130 1.98 martin
131 1.98 martin /*
132 1.98 martin New DDB api for adding and removing commands uses three lists, because
133 1.98 martin we use two types of commands
134 1.98 martin a) standard commands without subcommands -> reboot
135 1.98 martin b) show commands which are subcommands of show command -> show aio_jobs
136 1.98 martin c) if defined machine specific commands
137 1.116 blymn
138 1.98 martin ddb_add_cmd, ddb_rem_cmd use type (DDB_SHOW_CMD||DDB_BASE_CMD)argument to
139 1.98 martin add them to representativ lists.
140 1.98 martin */
141 1.98 martin
142 1.103 martin static const struct db_command db_command_table[];
143 1.103 martin static const struct db_command db_show_cmds[];
144 1.103 martin #ifdef DB_MACHINE_COMMANDS
145 1.103 martin static const struct db_command db_machine_command_table[];
146 1.103 martin #endif
147 1.103 martin
148 1.105 martin /* the global queue of all command tables */
149 1.105 martin TAILQ_HEAD(db_cmd_tbl_en_head, db_cmd_tbl_en);
150 1.105 martin
151 1.105 martin /* TAILQ entry used to register command tables */
152 1.105 martin struct db_cmd_tbl_en {
153 1.105 martin const struct db_command *db_cmd; /* cmd table */
154 1.105 martin TAILQ_ENTRY(db_cmd_tbl_en) db_cmd_next;
155 1.105 martin };
156 1.105 martin
157 1.103 martin /* head of base commands list */
158 1.98 martin static struct db_cmd_tbl_en_head db_base_cmd_list =
159 1.98 martin TAILQ_HEAD_INITIALIZER(db_base_cmd_list);
160 1.103 martin static struct db_cmd_tbl_en db_base_cmd_builtins =
161 1.103 martin { .db_cmd = db_command_table };
162 1.98 martin
163 1.103 martin /* head of show commands list */
164 1.98 martin static struct db_cmd_tbl_en_head db_show_cmd_list =
165 1.98 martin TAILQ_HEAD_INITIALIZER(db_show_cmd_list);
166 1.103 martin static struct db_cmd_tbl_en db_show_cmd_builtins =
167 1.103 martin { .db_cmd = db_show_cmds };
168 1.98 martin
169 1.103 martin /* head of machine commands list */
170 1.98 martin static struct db_cmd_tbl_en_head db_mach_cmd_list =
171 1.98 martin TAILQ_HEAD_INITIALIZER(db_mach_cmd_list);
172 1.103 martin #ifdef DB_MACHINE_COMMANDS
173 1.103 martin static struct db_cmd_tbl_en db_mach_cmd_builtins =
174 1.103 martin { .db_cmd = db_machine_command_table };
175 1.98 martin #endif
176 1.98 martin
177 1.1 cgd /*
178 1.1 cgd * if 'ed' style: 'dot' is set at start of last item printed,
179 1.1 cgd * and '+' points to next line.
180 1.1 cgd * Otherwise: 'dot' points to next item, '..' points to last.
181 1.1 cgd */
182 1.95 thorpej static bool db_ed_style = true;
183 1.64 simonb
184 1.104 martin static void db_init_commands(void);
185 1.103 martin static int db_register_tbl_entry(uint8_t type,
186 1.103 martin struct db_cmd_tbl_en *list_ent);
187 1.98 martin static void db_cmd_list(const struct db_cmd_tbl_en_head *);
188 1.98 martin static int db_cmd_search(const char *, const struct db_command *,
189 1.98 martin const struct db_command **);
190 1.98 martin static void db_command(const struct db_command **);
191 1.94 matt static void db_buf_print_cmd(db_expr_t, bool, db_expr_t, const char *);
192 1.94 matt static void db_event_print_cmd(db_expr_t, bool, db_expr_t, const char *);
193 1.94 matt static void db_fncall(db_expr_t, bool, db_expr_t, const char *);
194 1.98 martin static int db_get_list_type(const char *);
195 1.98 martin static void db_help_print_cmd(db_expr_t, bool, db_expr_t, const char *);
196 1.98 martin static void db_lock_print_cmd(db_expr_t, bool, db_expr_t, const char *);
197 1.98 martin static void db_mount_print_cmd(db_expr_t, bool, db_expr_t, const char *);
198 1.98 martin static void db_mbuf_print_cmd(db_expr_t, bool, db_expr_t, const char *);
199 1.94 matt static void db_malloc_print_cmd(db_expr_t, bool, db_expr_t, const char *);
200 1.94 matt static void db_map_print_cmd(db_expr_t, bool, db_expr_t, const char *);
201 1.98 martin static void db_namecache_print_cmd(db_expr_t, bool, db_expr_t,
202 1.98 martin const char *);
203 1.94 matt static void db_object_print_cmd(db_expr_t, bool, db_expr_t, const char *);
204 1.94 matt static void db_page_print_cmd(db_expr_t, bool, db_expr_t, const char *);
205 1.94 matt static void db_show_all_pages(db_expr_t, bool, db_expr_t, const char *);
206 1.94 matt static void db_pool_print_cmd(db_expr_t, bool, db_expr_t, const char *);
207 1.94 matt static void db_reboot_cmd(db_expr_t, bool, db_expr_t, const char *);
208 1.94 matt static void db_sifting_cmd(db_expr_t, bool, db_expr_t, const char *);
209 1.94 matt static void db_stack_trace_cmd(db_expr_t, bool, db_expr_t, const char *);
210 1.94 matt static void db_sync_cmd(db_expr_t, bool, db_expr_t, const char *);
211 1.112 yamt static void db_whatis_cmd(db_expr_t, bool, db_expr_t, const char *);
212 1.94 matt static void db_uvmexp_print_cmd(db_expr_t, bool, db_expr_t, const char *);
213 1.118 skrll #ifdef UVMHIST
214 1.118 skrll static void db_uvmhist_print_cmd(db_expr_t, bool, db_expr_t, const char *);
215 1.118 skrll #endif
216 1.94 matt static void db_vnode_print_cmd(db_expr_t, bool, db_expr_t, const char *);
217 1.64 simonb
218 1.64 simonb static const struct db_command db_show_cmds[] = {
219 1.98 martin /*added from all sub cmds*/
220 1.98 martin { DDB_ADD_CMD("callout", db_show_callout,
221 1.98 martin 0 ,"List all used callout functions.",NULL,NULL) },
222 1.98 martin { DDB_ADD_CMD("pages", db_show_all_pages,
223 1.98 martin 0 ,"List all used memory pages.",NULL,NULL) },
224 1.98 martin { DDB_ADD_CMD("procs", db_show_all_procs,
225 1.98 martin 0 ,"List all processes.",NULL,NULL) },
226 1.98 martin { DDB_ADD_CMD("pools", db_show_all_pools,
227 1.98 martin 0 ,"Show all poolS",NULL,NULL) },
228 1.121 ad #ifdef AIO
229 1.98 martin /*added from all sub cmds*/
230 1.98 martin { DDB_ADD_CMD("aio_jobs", db_show_aio_jobs, 0,
231 1.98 martin "Show aio jobs",NULL,NULL) },
232 1.121 ad #endif
233 1.98 martin { DDB_ADD_CMD("all", NULL,
234 1.98 martin CS_COMPAT, NULL,NULL,NULL) },
235 1.64 simonb #if defined(INET) && (NARP > 0)
236 1.98 martin { DDB_ADD_CMD("arptab", db_show_arptab, 0,NULL,NULL,NULL) },
237 1.64 simonb #endif
238 1.98 martin { DDB_ADD_CMD("breaks", db_listbreak_cmd, 0,
239 1.98 martin "Display all breaks.",NULL,NULL) },
240 1.98 martin { DDB_ADD_CMD("buf", db_buf_print_cmd, 0,
241 1.98 martin "Print the struct buf at address.", "[/f] address",NULL) },
242 1.98 martin { DDB_ADD_CMD("event", db_event_print_cmd, 0,
243 1.98 martin "Print all the non-zero evcnt(9) event counters.", "[/f]",NULL) },
244 1.117 blymn { DDB_ADD_CMD("files", db_show_files_cmd, 0,
245 1.117 blymn "Print the files open by process at address",
246 1.117 blymn "[/f] address", NULL) },
247 1.98 martin { DDB_ADD_CMD("lock", db_lock_print_cmd, 0,NULL,NULL,NULL) },
248 1.98 martin { DDB_ADD_CMD("malloc", db_malloc_print_cmd,0,NULL,NULL,NULL) },
249 1.98 martin { DDB_ADD_CMD("map", db_map_print_cmd, 0,
250 1.98 martin "Print the vm_map at address.", "[/f] address",NULL) },
251 1.98 martin { DDB_ADD_CMD("mount", db_mount_print_cmd, 0,
252 1.98 martin "Print the mount structure at address.", "[/f] address",NULL) },
253 1.119 rmind { DDB_ADD_CMD("mqueue", db_show_mqueue_cmd, 0,
254 1.119 rmind "Print the message queues", NULL, NULL) },
255 1.98 martin { DDB_ADD_CMD("mbuf", db_mbuf_print_cmd, 0,NULL,NULL,
256 1.98 martin "-c prints all mbuf chains") },
257 1.98 martin { DDB_ADD_CMD("ncache", db_namecache_print_cmd, 0,
258 1.98 martin "Dump the namecache list.", "address",NULL) },
259 1.98 martin { DDB_ADD_CMD("object", db_object_print_cmd, 0,
260 1.98 martin "Print the vm_object at address.", "[/f] address",NULL) },
261 1.98 martin { DDB_ADD_CMD("page", db_page_print_cmd, 0,
262 1.98 martin "Print the vm_page at address.", "[/f] address",NULL) },
263 1.98 martin { DDB_ADD_CMD("pool", db_pool_print_cmd, 0,
264 1.98 martin "Print the pool at address.", "[/clp] address",NULL) },
265 1.98 martin { DDB_ADD_CMD("registers", db_show_regs, 0,
266 1.98 martin "Display the register set.", "[/u]",NULL) },
267 1.98 martin { DDB_ADD_CMD("sched_qs", db_show_sched_qs, 0,
268 1.98 martin "Print the state of the scheduler's run queues.",
269 1.98 martin NULL,NULL) },
270 1.98 martin { DDB_ADD_CMD("uvmexp", db_uvmexp_print_cmd, 0,
271 1.98 martin "Print a selection of UVM counters and statistics.",
272 1.98 martin NULL,NULL) },
273 1.118 skrll #ifdef UVMHIST
274 1.118 skrll { DDB_ADD_CMD("uvmhist", db_uvmhist_print_cmd, 0,
275 1.118 skrll "Print the UVM history logs.",
276 1.118 skrll NULL,NULL) },
277 1.118 skrll #endif
278 1.98 martin { DDB_ADD_CMD("vnode", db_vnode_print_cmd, 0,
279 1.98 martin "Print the vnode at address.", "[/f] address",NULL) },
280 1.98 martin { DDB_ADD_CMD("watches", db_listwatch_cmd, 0,
281 1.98 martin "Display all watchpoints.", NULL,NULL) },
282 1.98 martin { DDB_ADD_CMD(NULL, NULL, 0,NULL,NULL,NULL) }
283 1.64 simonb };
284 1.64 simonb
285 1.77 yamt /* arch/<arch>/<arch>/db_interface.c */
286 1.77 yamt #ifdef DB_MACHINE_COMMANDS
287 1.77 yamt extern const struct db_command db_machine_command_table[];
288 1.77 yamt #endif
289 1.77 yamt
290 1.64 simonb static const struct db_command db_command_table[] = {
291 1.98 martin { DDB_ADD_CMD("b", db_breakpoint_cmd, 0,
292 1.98 martin "Set a breakpoint at address", "[/u] address[,count].",NULL) },
293 1.98 martin { DDB_ADD_CMD("break", db_breakpoint_cmd, 0,
294 1.98 martin "Set a breakpoint at address", "[/u] address[,count].",NULL) },
295 1.98 martin { DDB_ADD_CMD("bt", db_stack_trace_cmd, 0,
296 1.98 martin "Show backtrace.", "See help trace.",NULL) },
297 1.98 martin { DDB_ADD_CMD("c", db_continue_cmd, 0,
298 1.98 martin "Continue execution.", "[/c]",NULL) },
299 1.98 martin { DDB_ADD_CMD("call", db_fncall, CS_OWN,
300 1.98 martin "Call the function", "address[(expression[,...])]",NULL) },
301 1.98 martin { DDB_ADD_CMD("callout", db_show_callout, 0, NULL,
302 1.98 martin NULL,NULL ) },
303 1.98 martin { DDB_ADD_CMD("continue", db_continue_cmd, 0,
304 1.98 martin "Continue execution.", "[/c]",NULL) },
305 1.98 martin { DDB_ADD_CMD("d", db_delete_cmd, 0,
306 1.98 martin "Delete a breakpoint.", "address | #number",NULL) },
307 1.98 martin { DDB_ADD_CMD("delete", db_delete_cmd, 0,
308 1.98 martin "Delete a breakpoint.", "address | #number",NULL) },
309 1.98 martin { DDB_ADD_CMD("dmesg", db_dmesg, 0,
310 1.98 martin "Show kernel message buffer.", "[count]",NULL) },
311 1.98 martin { DDB_ADD_CMD("dwatch", db_deletewatch_cmd, 0,
312 1.98 martin "Delete the watchpoint.", "address",NULL) },
313 1.98 martin { DDB_ADD_CMD("examine", db_examine_cmd, CS_SET_DOT,
314 1.98 martin "Display the address locations.",
315 1.98 martin "[/modifier] address[,count]",NULL) },
316 1.98 martin { DDB_ADD_CMD("help", db_help_print_cmd, CS_OWN|CS_NOREPEAT,
317 1.98 martin "Display help about commands",
318 1.98 martin "Use other commands as arguments.",NULL) },
319 1.98 martin { DDB_ADD_CMD("kill", db_kill_proc, CS_OWN,
320 1.98 martin "Send a signal to the process","pid[,signal_number]",
321 1.98 martin " pid:\t\t\tthe process id (may need 0t prefix for decimal)\n"
322 1.98 martin " signal_number:\tthe signal to send") },
323 1.69 briggs #ifdef KGDB
324 1.99 martin { DDB_ADD_CMD("kgdb", db_kgdb_cmd, 0, NULL,NULL,NULL) },
325 1.69 briggs #endif
326 1.98 martin { DDB_ADD_CMD("machine",NULL,CS_MACH,
327 1.98 martin "Architecture specific functions.",NULL,NULL) },
328 1.98 martin { DDB_ADD_CMD("match", db_trace_until_matching_cmd,0,
329 1.98 martin "Stop at the matching return instruction.","See help next",NULL) },
330 1.98 martin { DDB_ADD_CMD("next", db_trace_until_matching_cmd,0,
331 1.98 martin "Stop at the matching return instruction.","[/p]",NULL) },
332 1.98 martin { DDB_ADD_CMD("p", db_print_cmd, 0,
333 1.98 martin "Print address according to the format.",
334 1.98 martin "[/axzodurc] address [address ...]",NULL) },
335 1.98 martin { DDB_ADD_CMD("print", db_print_cmd, 0,
336 1.98 martin "Print address according to the format.",
337 1.98 martin "[/axzodurc] address [address ...]",NULL) },
338 1.98 martin { DDB_ADD_CMD("ps", db_show_all_procs, 0,
339 1.98 martin "Print all processes.","See show all procs",NULL) },
340 1.98 martin { DDB_ADD_CMD("reboot", db_reboot_cmd, CS_OWN,
341 1.98 martin "Reboot","0x1 RB_ASKNAME, 0x2 RB_SINGLE, 0x4 RB_NOSYNC, 0x8 RB_HALT,"
342 1.98 martin "0x40 RB_KDB, 0x100 RB_DUMP, 0x808 RB_POWERDOWN",NULL) },
343 1.98 martin { DDB_ADD_CMD("s", db_single_step_cmd, 0,
344 1.98 martin "Single-step count times.","[/p] [,count]",NULL) },
345 1.98 martin { DDB_ADD_CMD("search", db_search_cmd, CS_OWN|CS_SET_DOT,
346 1.98 martin "Search memory from address for value.",
347 1.98 martin "[/bhl] address value [mask] [,count]",NULL) },
348 1.98 martin { DDB_ADD_CMD("set", db_set_cmd, CS_OWN,
349 1.98 martin "Set the named variable","$variable [=] expression",NULL) },
350 1.107 martin { DDB_ADD_CMD("show", NULL, CS_SHOW,
351 1.98 martin "Show kernel stats.", NULL,NULL) },
352 1.98 martin { DDB_ADD_CMD("sifting", db_sifting_cmd, CS_OWN,
353 1.98 martin "Search the symbol tables ","[/F] string",NULL) },
354 1.98 martin { DDB_ADD_CMD("step", db_single_step_cmd, 0,
355 1.98 martin "Single-step count times.","[/p] [,count]",NULL) },
356 1.98 martin { DDB_ADD_CMD("sync", db_sync_cmd, CS_OWN,
357 1.98 martin "Force a crash dump, and then reboot.",NULL,NULL) },
358 1.98 martin { DDB_ADD_CMD("trace", db_stack_trace_cmd, 0,
359 1.98 martin "Stack trace from frame-address.",
360 1.98 martin "[/u[l]] [frame-address][,count]",NULL) },
361 1.98 martin { DDB_ADD_CMD("until", db_trace_until_call_cmd,0,
362 1.98 martin "Stop at the next call or return instruction.","[/p]",NULL) },
363 1.98 martin { DDB_ADD_CMD("w", db_write_cmd, CS_MORE|CS_SET_DOT,
364 1.114 uwe "Write the expressions at succeeding locations.",
365 1.114 uwe "[/bhl] address expression [expression ...]",NULL) },
366 1.98 martin { DDB_ADD_CMD("watch", db_watchpoint_cmd, CS_MORE,
367 1.98 martin "Set a watchpoint for a region. ","address[,size]",NULL) },
368 1.112 yamt { DDB_ADD_CMD("whatis", db_whatis_cmd, 0,
369 1.112 yamt "Describe what an address is", "address", NULL) },
370 1.98 martin { DDB_ADD_CMD("write", db_write_cmd, CS_MORE|CS_SET_DOT,
371 1.98 martin "Write the expressions at succeeding locations.",
372 1.98 martin "[/bhl] address expression [expression ...]",NULL) },
373 1.98 martin { DDB_ADD_CMD("x", db_examine_cmd, CS_SET_DOT,
374 1.98 martin "Display the address locations.",
375 1.98 martin "[/modifier] address[,count]",NULL) },
376 1.98 martin { DDB_ADD_CMD(NULL, NULL, 0, NULL, NULL, NULL) }
377 1.64 simonb };
378 1.64 simonb
379 1.64 simonb static const struct db_command *db_last_command = NULL;
380 1.80 yamt #if defined(DDB_COMMANDONENTER)
381 1.81 yamt char db_cmd_on_enter[DB_LINE_MAXLEN + 1] = ___STRING(DDB_COMMANDONENTER);
382 1.81 yamt #else /* defined(DDB_COMMANDONENTER) */
383 1.81 yamt char db_cmd_on_enter[DB_LINE_MAXLEN + 1] = "";
384 1.80 yamt #endif /* defined(DDB_COMMANDONENTER) */
385 1.80 yamt #define DB_LINE_SEP ';'
386 1.1 cgd
387 1.1 cgd /*
388 1.1 cgd * Utility routine - discard tokens through end-of-line.
389 1.1 cgd */
390 1.1 cgd void
391 1.64 simonb db_skip_to_eol(void)
392 1.1 cgd {
393 1.64 simonb int t;
394 1.64 simonb
395 1.1 cgd do {
396 1.64 simonb t = db_read_token();
397 1.1 cgd } while (t != tEOL);
398 1.1 cgd }
399 1.1 cgd
400 1.64 simonb void
401 1.89 uwe db_error(const char *s)
402 1.64 simonb {
403 1.64 simonb
404 1.64 simonb if (s)
405 1.64 simonb db_printf("%s", s);
406 1.64 simonb db_flush_lex();
407 1.64 simonb longjmp(db_recover);
408 1.64 simonb }
409 1.64 simonb
410 1.98 martin /*Execute commandlist after ddb start
411 1.98 martin *This function goes through the command list created from commands and ';'
412 1.98 martin */
413 1.98 martin
414 1.81 yamt static void
415 1.81 yamt db_execute_commandlist(const char *cmdlist)
416 1.81 yamt {
417 1.81 yamt const char *cmd = cmdlist;
418 1.81 yamt const struct db_command *dummy = NULL;
419 1.81 yamt
420 1.81 yamt while (*cmd != '\0') {
421 1.81 yamt const char *ep = cmd;
422 1.81 yamt
423 1.81 yamt while (*ep != '\0' && *ep != DB_LINE_SEP) {
424 1.81 yamt ep++;
425 1.81 yamt }
426 1.81 yamt db_set_line(cmd, ep);
427 1.98 martin db_command(&dummy);
428 1.81 yamt cmd = ep;
429 1.81 yamt if (*cmd == DB_LINE_SEP) {
430 1.81 yamt cmd++;
431 1.81 yamt }
432 1.81 yamt }
433 1.81 yamt }
434 1.81 yamt
435 1.98 martin /*Initialize ddb command tables*/
436 1.102 martin void
437 1.98 martin db_init_commands(void)
438 1.98 martin {
439 1.101 martin static bool done = false;
440 1.98 martin
441 1.101 martin if (done) return;
442 1.101 martin done = true;
443 1.98 martin
444 1.103 martin /* register command tables */
445 1.103 martin (void)db_register_tbl_entry(DDB_BASE_CMD, &db_base_cmd_builtins);
446 1.98 martin #ifdef DB_MACHINE_COMMANDS
447 1.103 martin (void)db_register_tbl_entry(DDB_MACH_CMD, &db_mach_cmd_builtins);
448 1.98 martin #endif
449 1.103 martin (void)db_register_tbl_entry(DDB_SHOW_CMD, &db_show_cmd_builtins);
450 1.98 martin }
451 1.98 martin
452 1.98 martin
453 1.98 martin /*
454 1.98 martin * Add command table to the specified list
455 1.98 martin * Arg:
456 1.98 martin * int type specifies type of command table DDB_SHOW_CMD|DDB_BASE_CMD|DDB_MAC_CMD
457 1.98 martin * *cmd_tbl poiter to static allocated db_command table
458 1.98 martin *
459 1.98 martin *Command table must be NULL terminated array of struct db_command
460 1.98 martin */
461 1.98 martin int
462 1.98 martin db_register_tbl(uint8_t type, const struct db_command *cmd_tbl)
463 1.98 martin {
464 1.98 martin struct db_cmd_tbl_en *list_ent;
465 1.103 martin
466 1.103 martin if (cmd_tbl->name == 0)
467 1.103 martin /* empty list - ignore */
468 1.103 martin return 0;
469 1.103 martin
470 1.105 martin /* force builtin commands to be registered first */
471 1.105 martin db_init_commands();
472 1.105 martin
473 1.105 martin /* now create a list entry for this table */
474 1.103 martin list_ent = malloc(sizeof(struct db_cmd_tbl_en), M_TEMP, M_ZERO);
475 1.103 martin if (list_ent == NULL)
476 1.103 martin return ENOMEM;
477 1.105 martin list_ent->db_cmd=cmd_tbl;
478 1.103 martin
479 1.105 martin /* and register it */
480 1.103 martin return db_register_tbl_entry(type, list_ent);
481 1.103 martin }
482 1.103 martin
483 1.103 martin static int
484 1.103 martin db_register_tbl_entry(uint8_t type, struct db_cmd_tbl_en *list_ent)
485 1.103 martin {
486 1.98 martin struct db_cmd_tbl_en_head *list;
487 1.98 martin
488 1.103 martin switch(type) {
489 1.103 martin case DDB_BASE_CMD:
490 1.103 martin list = &db_base_cmd_list;
491 1.103 martin break;
492 1.103 martin case DDB_SHOW_CMD:
493 1.103 martin list = &db_show_cmd_list;
494 1.103 martin break;
495 1.103 martin case DDB_MACH_CMD:
496 1.103 martin list = &db_mach_cmd_list;
497 1.103 martin break;
498 1.103 martin default:
499 1.103 martin return ENOENT;
500 1.98 martin }
501 1.103 martin
502 1.105 martin TAILQ_INSERT_TAIL(list, list_ent, db_cmd_next);
503 1.103 martin
504 1.98 martin return 0;
505 1.98 martin }
506 1.103 martin
507 1.98 martin /*
508 1.103 martin * Remove command table specified with db_cmd address == cmd_tbl
509 1.98 martin */
510 1.98 martin int
511 1.98 martin db_unregister_tbl(uint8_t type,const struct db_command *cmd_tbl)
512 1.98 martin {
513 1.98 martin struct db_cmd_tbl_en *list_ent;
514 1.98 martin struct db_cmd_tbl_en_head *list;
515 1.98 martin
516 1.103 martin /* find list on which the entry should live */
517 1.103 martin switch (type) {
518 1.98 martin case DDB_BASE_CMD:
519 1.98 martin list=&db_base_cmd_list;
520 1.98 martin break;
521 1.98 martin case DDB_SHOW_CMD:
522 1.98 martin list=&db_show_cmd_list;
523 1.98 martin break;
524 1.98 martin case DDB_MACH_CMD:
525 1.98 martin list=&db_mach_cmd_list;
526 1.98 martin break;
527 1.98 martin default:
528 1.103 martin return EINVAL;
529 1.98 martin }
530 1.103 martin
531 1.103 martin TAILQ_FOREACH (list_ent,list,db_cmd_next) {
532 1.98 martin if (list_ent->db_cmd == cmd_tbl){
533 1.98 martin TAILQ_REMOVE(list,
534 1.98 martin list_ent,db_cmd_next);
535 1.98 martin free(list_ent,M_TEMP);
536 1.105 martin return 0;
537 1.98 martin }
538 1.103 martin }
539 1.105 martin return ENOENT;
540 1.116 blymn }
541 1.103 martin
542 1.98 martin /*This function is called from machine trap code.*/
543 1.64 simonb void
544 1.64 simonb db_command_loop(void)
545 1.64 simonb {
546 1.116 blymn
547 1.64 simonb label_t db_jmpbuf;
548 1.64 simonb label_t *savejmp;
549 1.64 simonb
550 1.64 simonb /*
551 1.64 simonb * Initialize 'prev' and 'next' to dot.
552 1.64 simonb */
553 1.64 simonb db_prev = db_dot;
554 1.64 simonb db_next = db_dot;
555 1.64 simonb
556 1.102 martin db_cmd_loop_done = false;
557 1.64 simonb
558 1.101 martin /*Init default command tables add machine, base,
559 1.101 martin show command tables to the list*/
560 1.102 martin db_init_commands();
561 1.101 martin
562 1.98 martin /*save context for return from ddb*/
563 1.64 simonb savejmp = db_recover;
564 1.64 simonb db_recover = &db_jmpbuf;
565 1.64 simonb (void) setjmp(&db_jmpbuf);
566 1.64 simonb
567 1.98 martin /*Execute default ddb start commands*/
568 1.81 yamt db_execute_commandlist(db_cmd_on_enter);
569 1.80 yamt
570 1.106 martin (void) setjmp(&db_jmpbuf);
571 1.64 simonb while (!db_cmd_loop_done) {
572 1.64 simonb if (db_print_position() != 0)
573 1.64 simonb db_printf("\n");
574 1.64 simonb db_output_line = 0;
575 1.64 simonb
576 1.64 simonb
577 1.64 simonb #ifdef MULTIPROCESSOR
578 1.64 simonb db_printf("db{%ld}> ", (long)cpu_number());
579 1.64 simonb #else
580 1.64 simonb db_printf("db> ");
581 1.64 simonb #endif
582 1.64 simonb (void) db_read_line();
583 1.64 simonb
584 1.98 martin db_command(&db_last_command);
585 1.64 simonb }
586 1.64 simonb
587 1.64 simonb db_recover = savejmp;
588 1.64 simonb }
589 1.1 cgd
590 1.1 cgd /*
591 1.98 martin * Search for command table for command prefix
592 1.108 uwe * ret: CMD_UNIQUE -> completely matches command
593 1.108 uwe * CMD_FOUND -> matches prefix of single command
594 1.108 uwe * CMD_AMBIGIOUS -> matches prefix of more than one command
595 1.108 uwe * CMD_NONE -> command not found
596 1.1 cgd */
597 1.64 simonb static int
598 1.98 martin db_cmd_search(const char *name,const struct db_command *table,
599 1.64 simonb const struct db_command **cmdp)
600 1.1 cgd {
601 1.116 blymn
602 1.53 jdolecek const struct db_command *cmd;
603 1.108 uwe int result;
604 1.1 cgd
605 1.108 uwe result = CMD_NONE;
606 1.110 martin *cmdp = NULL;
607 1.1 cgd for (cmd = table; cmd->name != 0; cmd++) {
608 1.64 simonb const char *lp;
609 1.64 simonb const char *rp;
610 1.64 simonb
611 1.64 simonb lp = name;
612 1.64 simonb rp = cmd->name;
613 1.108 uwe while (*lp != '\0' && *lp == *rp) {
614 1.107 martin rp++;
615 1.64 simonb lp++;
616 1.64 simonb }
617 1.108 uwe
618 1.108 uwe if (*lp != '\0') /* mismatch or extra chars in name */
619 1.108 uwe continue;
620 1.108 uwe
621 1.108 uwe if (*rp == '\0') { /* complete match */
622 1.107 martin *cmdp = cmd;
623 1.107 martin return (CMD_UNIQUE);
624 1.107 martin }
625 1.108 uwe
626 1.108 uwe /* prefix match: end of name, not end of command */
627 1.108 uwe if (result == CMD_NONE) {
628 1.108 uwe result = CMD_FOUND;
629 1.108 uwe *cmdp = cmd;
630 1.108 uwe }
631 1.108 uwe else if (result == CMD_FOUND) {
632 1.108 uwe result = CMD_AMBIGUOUS;
633 1.108 uwe *cmdp = NULL;
634 1.1 cgd }
635 1.1 cgd }
636 1.108 uwe
637 1.1 cgd return (result);
638 1.1 cgd }
639 1.1 cgd
640 1.98 martin /*
641 1.98 martin *List commands to the console.
642 1.98 martin */
643 1.64 simonb static void
644 1.98 martin db_cmd_list(const struct db_cmd_tbl_en_head *list)
645 1.1 cgd {
646 1.98 martin
647 1.98 martin struct db_cmd_tbl_en *list_ent;
648 1.98 martin const struct db_command *table;
649 1.105 martin size_t i, j, w, columns, lines, numcmds, width=0;
650 1.53 jdolecek const char *p;
651 1.1 cgd
652 1.105 martin TAILQ_FOREACH(list_ent,list,db_cmd_next) {
653 1.105 martin table = list_ent->db_cmd;
654 1.105 martin for (i = 0; table[i].name != NULL; i++) {
655 1.98 martin w = strlen(table[i].name);
656 1.98 martin if (w > width)
657 1.98 martin width = w;
658 1.98 martin }
659 1.32 lukem }
660 1.98 martin
661 1.32 lukem width = DB_NEXT_TAB(width);
662 1.32 lukem
663 1.32 lukem columns = db_max_width / width;
664 1.32 lukem if (columns == 0)
665 1.32 lukem columns = 1;
666 1.98 martin
667 1.105 martin TAILQ_FOREACH(list_ent,list,db_cmd_next) {
668 1.105 martin table = list_ent->db_cmd;
669 1.98 martin
670 1.105 martin for (numcmds = 0; table[numcmds].name != NULL; numcmds++)
671 1.105 martin ;
672 1.105 martin lines = (numcmds + columns - 1) / columns;
673 1.116 blymn
674 1.98 martin for (i = 0; i < lines; i++) {
675 1.98 martin for (j = 0; j < columns; j++) {
676 1.98 martin p = table[j * lines + i].name;
677 1.98 martin if (p)
678 1.98 martin db_printf("%s", p);
679 1.105 martin if (j * lines + i + lines >= numcmds) {
680 1.98 martin db_putchar('\n');
681 1.98 martin break;
682 1.98 martin }
683 1.98 martin if (p) {
684 1.98 martin w = strlen(p);
685 1.98 martin while (w < width) {
686 1.98 martin w = DB_NEXT_TAB(w);
687 1.98 martin db_putchar('\t');
688 1.98 martin }
689 1.98 martin }
690 1.98 martin }
691 1.98 martin }
692 1.98 martin }
693 1.98 martin return;
694 1.98 martin }
695 1.98 martin
696 1.98 martin /*
697 1.98 martin *Returns type of list for command with name *name.
698 1.98 martin */
699 1.98 martin static int
700 1.98 martin db_get_list_type(const char *name)
701 1.98 martin {
702 1.98 martin
703 1.98 martin const struct db_command *cmd;
704 1.98 martin struct db_cmd_tbl_en *list_ent;
705 1.98 martin int error,ret=-1;
706 1.98 martin
707 1.105 martin /* search for the command name */
708 1.105 martin TAILQ_FOREACH(list_ent,&db_base_cmd_list,db_cmd_next) {
709 1.105 martin /*
710 1.105 martin * cmd_search returns CMD_UNIQUE, CMD_FOUND ...
711 1.105 martin * CMD_UNIQUE when name was completly matched to cmd->name
712 1.105 martin * CMD_FOUND when name was only partially matched to cmd->name
713 1.105 martin * CMD_NONE command not found in a list
714 1.105 martin * CMD_AMBIGIOUS ->more partialy matches
715 1.98 martin */
716 1.98 martin
717 1.105 martin error = db_cmd_search(name, list_ent->db_cmd, &cmd);
718 1.105 martin
719 1.105 martin if (error == CMD_UNIQUE) {
720 1.105 martin /* exact match found */
721 1.105 martin if (cmd->flag == CS_SHOW) {
722 1.105 martin ret = DDB_SHOW_CMD;
723 1.32 lukem break;
724 1.32 lukem }
725 1.105 martin if (cmd->flag == CS_MACH) {
726 1.105 martin ret = DDB_MACH_CMD;
727 1.98 martin break;
728 1.98 martin } else {
729 1.105 martin ret = DDB_BASE_CMD;
730 1.98 martin break;
731 1.32 lukem }
732 1.105 martin
733 1.111 martin } else if (error == CMD_FOUND) {
734 1.105 martin /*
735 1.105 martin * partial match, search will continue, but
736 1.105 martin * note current result in case we won't
737 1.105 martin * find anything better.
738 1.105 martin */
739 1.98 martin if (cmd->flag == CS_SHOW)
740 1.105 martin ret = DDB_SHOW_CMD;
741 1.111 martin else if (cmd->flag == CS_MACH)
742 1.105 martin ret = DDB_MACH_CMD;
743 1.98 martin else
744 1.105 martin ret = DDB_BASE_CMD;
745 1.32 lukem }
746 1.1 cgd }
747 1.102 martin
748 1.105 martin return ret;
749 1.1 cgd }
750 1.1 cgd
751 1.98 martin /*
752 1.98 martin *Parse command line and execute apropriate function.
753 1.98 martin */
754 1.64 simonb static void
755 1.98 martin db_command(const struct db_command **last_cmdp)
756 1.1 cgd {
757 1.98 martin const struct db_command *command;
758 1.98 martin struct db_cmd_tbl_en *list_ent;
759 1.98 martin struct db_cmd_tbl_en_head *list;
760 1.116 blymn
761 1.1 cgd int t;
762 1.98 martin int result;
763 1.116 blymn
764 1.1 cgd char modif[TOK_STRING_SIZE];
765 1.1 cgd db_expr_t addr, count;
766 1.95 thorpej bool have_addr = false;
767 1.98 martin
768 1.87 he static db_expr_t last_count = 0;
769 1.116 blymn
770 1.98 martin command = NULL; /* XXX gcc */
771 1.86 mrg
772 1.1 cgd t = db_read_token();
773 1.38 jhawk if ((t == tEOL) || (t == tCOMMA)) {
774 1.1 cgd /*
775 1.64 simonb * An empty line repeats last command, at 'next'.
776 1.64 simonb * Only a count repeats the last command with the new count.
777 1.64 simonb */
778 1.98 martin command = *last_cmdp;
779 1.98 martin
780 1.98 martin if (!command)
781 1.98 martin return;
782 1.98 martin
783 1.64 simonb addr = (db_expr_t)db_next;
784 1.64 simonb if (t == tCOMMA) {
785 1.64 simonb if (!db_expression(&count)) {
786 1.64 simonb db_printf("Count missing\n");
787 1.64 simonb db_flush_lex();
788 1.64 simonb return;
789 1.64 simonb }
790 1.64 simonb } else
791 1.64 simonb count = last_count;
792 1.95 thorpej have_addr = false;
793 1.64 simonb modif[0] = '\0';
794 1.64 simonb db_skip_to_eol();
795 1.98 martin
796 1.64 simonb } else if (t == tEXCL) {
797 1.64 simonb db_fncall(0, 0, 0, NULL);
798 1.64 simonb return;
799 1.98 martin
800 1.64 simonb } else if (t != tIDENT) {
801 1.64 simonb db_printf("?\n");
802 1.64 simonb db_flush_lex();
803 1.64 simonb return;
804 1.98 martin
805 1.64 simonb } else {
806 1.98 martin
807 1.98 martin switch(db_get_list_type(db_tok_string)) {
808 1.98 martin
809 1.98 martin case DDB_BASE_CMD:
810 1.107 martin list = &db_base_cmd_list;
811 1.98 martin break;
812 1.107 martin
813 1.98 martin case DDB_SHOW_CMD:
814 1.107 martin list = &db_show_cmd_list;
815 1.98 martin /* need to read show subcommand if show command list
816 1.98 martin is used. */
817 1.107 martin t = db_read_token();
818 1.98 martin
819 1.98 martin if (t != tIDENT) {
820 1.98 martin /* if only show command is executed, print
821 1.98 martin all subcommands */
822 1.116 blymn db_cmd_list(list);
823 1.64 simonb db_flush_lex();
824 1.64 simonb return;
825 1.98 martin }
826 1.98 martin break;
827 1.98 martin case DDB_MACH_CMD:
828 1.107 martin list = &db_mach_cmd_list;
829 1.98 martin /* need to read machine subcommand if
830 1.98 martin machine level 2 command list is used. */
831 1.98 martin t = db_read_token();
832 1.98 martin
833 1.98 martin if (t != tIDENT) {
834 1.98 martin /* if only show command is executed, print
835 1.98 martin all subcommands */
836 1.98 martin db_cmd_list(list);
837 1.64 simonb db_flush_lex();
838 1.64 simonb return;
839 1.116 blymn }
840 1.98 martin break;
841 1.98 martin default:
842 1.98 martin db_printf("No such command\n");
843 1.116 blymn db_flush_lex();
844 1.98 martin return;
845 1.98 martin }
846 1.98 martin
847 1.98 martin COMPAT_RET:
848 1.107 martin TAILQ_FOREACH(list_ent, list, db_cmd_next) {
849 1.98 martin result = db_cmd_search(db_tok_string, list_ent->db_cmd,
850 1.98 martin &command);
851 1.98 martin
852 1.98 martin /* after CMD_UNIQUE in cmd_list only a single command
853 1.98 martin name is possible */
854 1.98 martin if (result == CMD_UNIQUE)
855 1.64 simonb break;
856 1.98 martin
857 1.98 martin }
858 1.101 martin
859 1.118 skrll /* check compatibility flag */
860 1.101 martin if (command && command->flag & CS_COMPAT){
861 1.98 martin t = db_read_token();
862 1.98 martin if (t != tIDENT) {
863 1.98 martin db_cmd_list(list);
864 1.64 simonb db_flush_lex();
865 1.64 simonb return;
866 1.64 simonb }
867 1.1 cgd
868 1.98 martin /* support only level 2 commands here */
869 1.98 martin goto COMPAT_RET;
870 1.101 martin }
871 1.101 martin
872 1.101 martin if (!command) {
873 1.101 martin db_printf("No such command\n");
874 1.101 martin db_flush_lex();
875 1.101 martin return;
876 1.101 martin }
877 1.98 martin
878 1.98 martin if ((command->flag & CS_OWN) == 0) {
879 1.98 martin
880 1.64 simonb /*
881 1.64 simonb * Standard syntax:
882 1.64 simonb * command [/modifier] [addr] [,count]
883 1.64 simonb */
884 1.98 martin t = db_read_token(); /* get modifier */
885 1.116 blymn if (t == tSLASH) {
886 1.64 simonb t = db_read_token();
887 1.64 simonb if (t != tIDENT) {
888 1.64 simonb db_printf("Bad modifier\n");
889 1.64 simonb db_flush_lex();
890 1.64 simonb return;
891 1.64 simonb }
892 1.98 martin /* save modifier */
893 1.71 itojun strlcpy(modif, db_tok_string, sizeof(modif));
894 1.116 blymn
895 1.64 simonb } else {
896 1.64 simonb db_unread_token(t);
897 1.64 simonb modif[0] = '\0';
898 1.64 simonb }
899 1.64 simonb
900 1.98 martin if (db_expression(&addr)) { /*get address*/
901 1.64 simonb db_dot = (db_addr_t) addr;
902 1.64 simonb db_last_addr = db_dot;
903 1.95 thorpej have_addr = true;
904 1.64 simonb } else {
905 1.64 simonb addr = (db_expr_t) db_dot;
906 1.95 thorpej have_addr = false;
907 1.64 simonb }
908 1.98 martin
909 1.64 simonb t = db_read_token();
910 1.98 martin if (t == tCOMMA) { /*Get count*/
911 1.64 simonb if (!db_expression(&count)) {
912 1.64 simonb db_printf("Count missing\n");
913 1.64 simonb db_flush_lex();
914 1.64 simonb return;
915 1.64 simonb }
916 1.116 blymn } else {
917 1.64 simonb db_unread_token(t);
918 1.64 simonb count = -1;
919 1.64 simonb }
920 1.98 martin if ((command->flag & CS_MORE) == 0) {
921 1.64 simonb db_skip_to_eol();
922 1.64 simonb }
923 1.1 cgd }
924 1.1 cgd }
925 1.98 martin
926 1.98 martin if (command->flag & CS_NOREPEAT) {
927 1.98 martin *last_cmdp = NULL;
928 1.98 martin last_count = 0;
929 1.98 martin } else {
930 1.98 martin *last_cmdp = command;
931 1.98 martin last_count = count;
932 1.98 martin }
933 1.98 martin
934 1.98 martin if (command != NULL) {
935 1.1 cgd /*
936 1.64 simonb * Execute the command.
937 1.1 cgd */
938 1.107 martin if (command->fcn != NULL)
939 1.107 martin (*command->fcn)(addr, have_addr, count, modif);
940 1.64 simonb
941 1.98 martin if (command->flag & CS_SET_DOT) {
942 1.64 simonb /*
943 1.64 simonb * If command changes dot, set dot to
944 1.64 simonb * previous address displayed (if 'ed' style).
945 1.64 simonb */
946 1.64 simonb if (db_ed_style)
947 1.64 simonb db_dot = db_prev;
948 1.64 simonb else
949 1.64 simonb db_dot = db_next;
950 1.64 simonb } else {
951 1.64 simonb /*
952 1.64 simonb * If command does not change dot,
953 1.64 simonb * set 'next' location to be the same.
954 1.64 simonb */
955 1.64 simonb db_next = db_dot;
956 1.1 cgd }
957 1.1 cgd }
958 1.1 cgd }
959 1.1 cgd
960 1.98 martin /*
961 1.98 martin * Print help for commands
962 1.98 martin */
963 1.98 martin static void
964 1.98 martin db_help_print_cmd(db_expr_t addr, bool have_addr, db_expr_t count,
965 1.98 martin const char *modif)
966 1.98 martin {
967 1.116 blymn
968 1.98 martin const struct db_cmd_tbl_en_head *list;
969 1.98 martin const struct db_cmd_tbl_en *list_ent;
970 1.110 martin const struct db_command *help = NULL;
971 1.98 martin int t, result;
972 1.116 blymn
973 1.98 martin t = db_read_token();
974 1.98 martin /* is there another command after the "help"? */
975 1.98 martin if (t == tIDENT){
976 1.98 martin
977 1.110 martin switch(db_get_list_type(db_tok_string)) {
978 1.98 martin
979 1.98 martin case DDB_BASE_CMD:
980 1.98 martin list=&db_base_cmd_list;
981 1.98 martin break;
982 1.98 martin case DDB_SHOW_CMD:
983 1.98 martin list=&db_show_cmd_list;
984 1.98 martin /* read the show subcommand */
985 1.116 blymn t = db_read_token();
986 1.98 martin
987 1.98 martin if (t != tIDENT) {
988 1.98 martin /* no subcommand, print the list */
989 1.98 martin db_cmd_list(list);
990 1.98 martin db_flush_lex();
991 1.98 martin return;
992 1.116 blymn }
993 1.116 blymn
994 1.98 martin break;
995 1.98 martin case DDB_MACH_CMD:
996 1.98 martin list=&db_mach_cmd_list;
997 1.98 martin /* read machine subcommand */
998 1.116 blymn t = db_read_token();
999 1.98 martin
1000 1.98 martin if (t != tIDENT) {
1001 1.98 martin /* no subcommand - just print the list */
1002 1.98 martin db_cmd_list(list);
1003 1.98 martin db_flush_lex();
1004 1.98 martin return;
1005 1.98 martin }
1006 1.98 martin break;
1007 1.103 martin
1008 1.98 martin default:
1009 1.98 martin db_printf("No such command\n");
1010 1.98 martin db_flush_lex();
1011 1.98 martin return;
1012 1.98 martin }
1013 1.116 blymn COMPAT_RET:
1014 1.98 martin TAILQ_FOREACH(list_ent,list,db_cmd_next){
1015 1.98 martin result = db_cmd_search(db_tok_string, list_ent->db_cmd,
1016 1.98 martin &help);
1017 1.98 martin /* after CMD_UNIQUE only a single command
1018 1.98 martin name is possible */
1019 1.98 martin if (result == CMD_UNIQUE)
1020 1.98 martin break;
1021 1.98 martin }
1022 1.98 martin #ifdef DDB_VERBOSE_HELP
1023 1.98 martin /*print help*/
1024 1.98 martin
1025 1.98 martin db_printf("Command: %s\n",help->name);
1026 1.98 martin
1027 1.98 martin if (help->cmd_descr != NULL)
1028 1.98 martin db_printf(" Description: %s\n",help->cmd_descr);
1029 1.116 blymn
1030 1.98 martin if (help->cmd_arg != NULL)
1031 1.98 martin db_printf(" Arguments: %s\n",help->cmd_arg);
1032 1.98 martin
1033 1.98 martin if (help->cmd_arg_help != NULL)
1034 1.98 martin db_printf(" Arguments description:\n%s\n",
1035 1.98 martin help->cmd_arg_help);
1036 1.98 martin
1037 1.98 martin if ((help->cmd_arg == NULL) && (help->cmd_descr == NULL))
1038 1.98 martin db_printf("%s Doesn't have any help message included.\n",
1039 1.98 martin help->name);
1040 1.98 martin #endif
1041 1.98 martin /* check compatibility flag */
1042 1.98 martin /*
1043 1.98 martin * The "show all" command table has been merged with the
1044 1.98 martin * "show" command table - but we want to keep the old UI
1045 1.98 martin * available. So if we find a CS_COMPAT entry, we read
1046 1.98 martin * the next token and try again.
1047 1.98 martin */
1048 1.98 martin if (help->flag == CS_COMPAT){
1049 1.98 martin t = db_read_token();
1050 1.98 martin
1051 1.98 martin if (t != tIDENT){
1052 1.98 martin db_cmd_list(list);
1053 1.98 martin db_flush_lex();
1054 1.98 martin return;
1055 1.98 martin }
1056 1.98 martin
1057 1.98 martin goto COMPAT_RET;
1058 1.98 martin /* support only level 2 commands here */
1059 1.98 martin } else {
1060 1.98 martin db_skip_to_eol();
1061 1.98 martin }
1062 1.116 blymn
1063 1.98 martin } else /* t != tIDENT */
1064 1.98 martin /* print base commands */
1065 1.98 martin db_cmd_list(&db_base_cmd_list);
1066 1.116 blymn
1067 1.98 martin return;
1068 1.98 martin }
1069 1.110 martin
1070 1.4 brezak /*ARGSUSED*/
1071 1.64 simonb static void
1072 1.94 matt db_map_print_cmd(db_expr_t addr, bool have_addr, db_expr_t count,
1073 1.90 christos const char *modif)
1074 1.64 simonb {
1075 1.95 thorpej bool full = false;
1076 1.64 simonb
1077 1.64 simonb if (modif[0] == 'f')
1078 1.95 thorpej full = true;
1079 1.60 matt
1080 1.95 thorpej if (have_addr == false)
1081 1.120 rmind addr = (db_expr_t)(uintptr_t) kernel_map;
1082 1.4 brezak
1083 1.120 rmind uvm_map_printit((struct vm_map *)(uintptr_t) addr, full, db_printf);
1084 1.4 brezak }
1085 1.4 brezak
1086 1.4 brezak /*ARGSUSED*/
1087 1.64 simonb static void
1088 1.94 matt db_malloc_print_cmd(db_expr_t addr, bool have_addr,
1089 1.91 christos db_expr_t count, const char *modif)
1090 1.62 thorpej {
1091 1.64 simonb
1092 1.62 thorpej #ifdef MALLOC_DEBUG
1093 1.62 thorpej if (!have_addr)
1094 1.62 thorpej addr = 0;
1095 1.62 thorpej
1096 1.62 thorpej debug_malloc_printit(db_printf, (vaddr_t) addr);
1097 1.62 thorpej #else
1098 1.62 thorpej db_printf("The kernel is not built with the MALLOC_DEBUG option.\n");
1099 1.62 thorpej #endif /* MALLOC_DEBUG */
1100 1.62 thorpej }
1101 1.62 thorpej
1102 1.62 thorpej /*ARGSUSED*/
1103 1.64 simonb static void
1104 1.94 matt db_object_print_cmd(db_expr_t addr, bool have_addr,
1105 1.91 christos db_expr_t count, const char *modif)
1106 1.64 simonb {
1107 1.95 thorpej bool full = false;
1108 1.64 simonb
1109 1.64 simonb if (modif[0] == 'f')
1110 1.95 thorpej full = true;
1111 1.4 brezak
1112 1.120 rmind uvm_object_printit((struct uvm_object *)(uintptr_t) addr, full,
1113 1.66 scw db_printf);
1114 1.24 mrg }
1115 1.24 mrg
1116 1.24 mrg /*ARGSUSED*/
1117 1.64 simonb static void
1118 1.94 matt db_page_print_cmd(db_expr_t addr, bool have_addr,
1119 1.91 christos db_expr_t count, const char *modif)
1120 1.64 simonb {
1121 1.95 thorpej bool full = false;
1122 1.64 simonb
1123 1.64 simonb if (modif[0] == 'f')
1124 1.95 thorpej full = true;
1125 1.24 mrg
1126 1.120 rmind uvm_page_printit((struct vm_page *)(uintptr_t) addr, full, db_printf);
1127 1.36 chs }
1128 1.36 chs
1129 1.36 chs /*ARGSUSED*/
1130 1.64 simonb static void
1131 1.94 matt db_show_all_pages(db_expr_t addr, bool have_addr,
1132 1.91 christos db_expr_t count, const char *modif)
1133 1.84 bjh21 {
1134 1.84 bjh21
1135 1.84 bjh21 uvm_page_printall(db_printf);
1136 1.84 bjh21 }
1137 1.84 bjh21
1138 1.84 bjh21 /*ARGSUSED*/
1139 1.84 bjh21 static void
1140 1.94 matt db_buf_print_cmd(db_expr_t addr, bool have_addr,
1141 1.91 christos db_expr_t count, const char *modif)
1142 1.36 chs {
1143 1.95 thorpej bool full = false;
1144 1.64 simonb
1145 1.36 chs if (modif[0] == 'f')
1146 1.95 thorpej full = true;
1147 1.36 chs
1148 1.120 rmind vfs_buf_print((struct buf *)(uintptr_t) addr, full, db_printf);
1149 1.65 simonb }
1150 1.65 simonb
1151 1.65 simonb /*ARGSUSED*/
1152 1.65 simonb static void
1153 1.94 matt db_event_print_cmd(db_expr_t addr, bool have_addr,
1154 1.91 christos db_expr_t count, const char *modif)
1155 1.65 simonb {
1156 1.95 thorpej bool full = false;
1157 1.65 simonb
1158 1.65 simonb if (modif[0] == 'f')
1159 1.95 thorpej full = true;
1160 1.65 simonb
1161 1.65 simonb event_print(full, db_printf);
1162 1.36 chs }
1163 1.36 chs
1164 1.36 chs /*ARGSUSED*/
1165 1.64 simonb static void
1166 1.94 matt db_vnode_print_cmd(db_expr_t addr, bool have_addr,
1167 1.91 christos db_expr_t count, const char *modif)
1168 1.36 chs {
1169 1.95 thorpej bool full = false;
1170 1.64 simonb
1171 1.36 chs if (modif[0] == 'f')
1172 1.95 thorpej full = true;
1173 1.36 chs
1174 1.120 rmind vfs_vnode_print((struct vnode *)(uintptr_t) addr, full, db_printf);
1175 1.74 dbj }
1176 1.74 dbj
1177 1.74 dbj static void
1178 1.94 matt db_mount_print_cmd(db_expr_t addr, bool have_addr,
1179 1.91 christos db_expr_t count, const char *modif)
1180 1.74 dbj {
1181 1.95 thorpej bool full = false;
1182 1.74 dbj
1183 1.74 dbj if (modif[0] == 'f')
1184 1.95 thorpej full = true;
1185 1.74 dbj
1186 1.120 rmind vfs_mount_print((struct mount *)(uintptr_t) addr, full, db_printf);
1187 1.4 brezak }
1188 1.4 brezak
1189 1.31 thorpej /*ARGSUSED*/
1190 1.64 simonb static void
1191 1.94 matt db_mbuf_print_cmd(db_expr_t addr, bool have_addr,
1192 1.91 christos db_expr_t count, const char *modif)
1193 1.83 yamt {
1194 1.83 yamt
1195 1.120 rmind m_print((const struct mbuf *)(uintptr_t) addr, modif, db_printf);
1196 1.83 yamt }
1197 1.83 yamt
1198 1.83 yamt /*ARGSUSED*/
1199 1.83 yamt static void
1200 1.94 matt db_pool_print_cmd(db_expr_t addr, bool have_addr,
1201 1.91 christos db_expr_t count, const char *modif)
1202 1.31 thorpej {
1203 1.64 simonb
1204 1.120 rmind pool_printit((struct pool *)(uintptr_t) addr, modif, db_printf);
1205 1.51 chs }
1206 1.31 thorpej
1207 1.51 chs /*ARGSUSED*/
1208 1.64 simonb static void
1209 1.94 matt db_namecache_print_cmd(db_expr_t addr, bool have_addr,
1210 1.91 christos db_expr_t count, const char *modif)
1211 1.51 chs {
1212 1.64 simonb
1213 1.120 rmind namecache_print((struct vnode *)(uintptr_t) addr, db_printf);
1214 1.51 chs }
1215 1.51 chs
1216 1.51 chs /*ARGSUSED*/
1217 1.64 simonb static void
1218 1.94 matt db_uvmexp_print_cmd(db_expr_t addr, bool have_addr,
1219 1.91 christos db_expr_t count, const char *modif)
1220 1.51 chs {
1221 1.64 simonb
1222 1.51 chs uvmexp_print(db_printf);
1223 1.31 thorpej }
1224 1.31 thorpej
1225 1.118 skrll #ifdef UVMHIST
1226 1.118 skrll /*ARGSUSED*/
1227 1.118 skrll static void
1228 1.118 skrll db_uvmhist_print_cmd(db_expr_t addr, bool have_addr,
1229 1.118 skrll db_expr_t count, const char *modif)
1230 1.118 skrll {
1231 1.118 skrll
1232 1.118 skrll uvmhist_print(db_printf);
1233 1.118 skrll }
1234 1.118 skrll #endif
1235 1.118 skrll
1236 1.92 ad /*ARGSUSED*/
1237 1.92 ad static void
1238 1.94 matt db_lock_print_cmd(db_expr_t addr, bool have_addr,
1239 1.92 ad db_expr_t count, const char *modif)
1240 1.92 ad {
1241 1.92 ad
1242 1.92 ad lockdebug_lock_print((void *)addr, db_printf);
1243 1.92 ad }
1244 1.92 ad
1245 1.1 cgd /*
1246 1.1 cgd * Call random function:
1247 1.1 cgd * !expr(arg,arg,arg)
1248 1.1 cgd */
1249 1.16 christos /*ARGSUSED*/
1250 1.64 simonb static void
1251 1.94 matt db_fncall(db_expr_t addr, bool have_addr,
1252 1.91 christos db_expr_t count, const char *modif)
1253 1.1 cgd {
1254 1.1 cgd db_expr_t fn_addr;
1255 1.1 cgd #define MAXARGS 11
1256 1.1 cgd db_expr_t args[MAXARGS];
1257 1.1 cgd int nargs = 0;
1258 1.1 cgd db_expr_t retval;
1259 1.64 simonb db_expr_t (*func)(db_expr_t, ...);
1260 1.1 cgd int t;
1261 1.1 cgd
1262 1.1 cgd if (!db_expression(&fn_addr)) {
1263 1.64 simonb db_printf("Bad function\n");
1264 1.64 simonb db_flush_lex();
1265 1.64 simonb return;
1266 1.1 cgd }
1267 1.120 rmind func = (db_expr_t (*)(db_expr_t, ...))(uintptr_t) fn_addr;
1268 1.1 cgd
1269 1.1 cgd t = db_read_token();
1270 1.1 cgd if (t == tLPAREN) {
1271 1.64 simonb if (db_expression(&args[0])) {
1272 1.64 simonb nargs++;
1273 1.64 simonb while ((t = db_read_token()) == tCOMMA) {
1274 1.64 simonb if (nargs == MAXARGS) {
1275 1.64 simonb db_printf("Too many arguments\n");
1276 1.64 simonb db_flush_lex();
1277 1.64 simonb return;
1278 1.64 simonb }
1279 1.64 simonb if (!db_expression(&args[nargs])) {
1280 1.64 simonb db_printf("Argument missing\n");
1281 1.64 simonb db_flush_lex();
1282 1.64 simonb return;
1283 1.64 simonb }
1284 1.64 simonb nargs++;
1285 1.64 simonb }
1286 1.64 simonb db_unread_token(t);
1287 1.64 simonb }
1288 1.64 simonb if (db_read_token() != tRPAREN) {
1289 1.64 simonb db_printf("?\n");
1290 1.1 cgd db_flush_lex();
1291 1.1 cgd return;
1292 1.1 cgd }
1293 1.1 cgd }
1294 1.1 cgd db_skip_to_eol();
1295 1.1 cgd
1296 1.1 cgd while (nargs < MAXARGS) {
1297 1.64 simonb args[nargs++] = 0;
1298 1.1 cgd }
1299 1.1 cgd
1300 1.1 cgd retval = (*func)(args[0], args[1], args[2], args[3], args[4],
1301 1.20 christos args[5], args[6], args[7], args[8], args[9]);
1302 1.45 jhawk db_printf("%s\n", db_num_to_str(retval));
1303 1.23 scottr }
1304 1.23 scottr
1305 1.64 simonb static void
1306 1.94 matt db_reboot_cmd(db_expr_t addr, bool have_addr,
1307 1.91 christos db_expr_t count, const char *modif)
1308 1.23 scottr {
1309 1.23 scottr db_expr_t bootflags;
1310 1.23 scottr
1311 1.23 scottr /* Flags, default to RB_AUTOBOOT */
1312 1.23 scottr if (!db_expression(&bootflags))
1313 1.23 scottr bootflags = (db_expr_t)RB_AUTOBOOT;
1314 1.23 scottr if (db_read_token() != tEOL) {
1315 1.64 simonb db_error("?\n");
1316 1.64 simonb /*NOTREACHED*/
1317 1.23 scottr }
1318 1.47 sommerfe /*
1319 1.47 sommerfe * We are leaving DDB, never to return upward.
1320 1.47 sommerfe * Clear db_recover so that we can debug faults in functions
1321 1.47 sommerfe * called from cpu_reboot.
1322 1.47 sommerfe */
1323 1.47 sommerfe db_recover = 0;
1324 1.23 scottr cpu_reboot((int)bootflags, NULL);
1325 1.41 jhawk }
1326 1.41 jhawk
1327 1.64 simonb static void
1328 1.94 matt db_sifting_cmd(db_expr_t addr, bool have_addr,
1329 1.91 christos db_expr_t count, const char *modif)
1330 1.41 jhawk {
1331 1.41 jhawk int mode, t;
1332 1.41 jhawk
1333 1.41 jhawk t = db_read_token();
1334 1.41 jhawk if (t == tSLASH) {
1335 1.41 jhawk t = db_read_token();
1336 1.41 jhawk if (t != tIDENT) {
1337 1.41 jhawk bad_modifier:
1338 1.41 jhawk db_printf("Bad modifier\n");
1339 1.41 jhawk db_flush_lex();
1340 1.41 jhawk return;
1341 1.41 jhawk }
1342 1.41 jhawk if (!strcmp(db_tok_string, "F"))
1343 1.41 jhawk mode = 'F';
1344 1.41 jhawk else
1345 1.41 jhawk goto bad_modifier;
1346 1.41 jhawk t = db_read_token();
1347 1.41 jhawk } else
1348 1.41 jhawk mode = 0;
1349 1.41 jhawk
1350 1.51 chs if (t == tIDENT)
1351 1.41 jhawk db_sifting(db_tok_string, mode);
1352 1.41 jhawk else {
1353 1.41 jhawk db_printf("Bad argument (non-string)\n");
1354 1.41 jhawk db_flush_lex();
1355 1.41 jhawk }
1356 1.43 jhawk }
1357 1.43 jhawk
1358 1.64 simonb static void
1359 1.94 matt db_stack_trace_cmd(db_expr_t addr, bool have_addr, db_expr_t count, const char *modif)
1360 1.43 jhawk {
1361 1.79 drochner register const char *cp = modif;
1362 1.70 atatat register char c;
1363 1.70 atatat void (*pr)(const char *, ...);
1364 1.70 atatat
1365 1.70 atatat pr = db_printf;
1366 1.70 atatat while ((c = *cp++) != 0)
1367 1.70 atatat if (c == 'l')
1368 1.70 atatat pr = printf;
1369 1.64 simonb
1370 1.43 jhawk if (count == -1)
1371 1.43 jhawk count = 65535;
1372 1.43 jhawk
1373 1.70 atatat db_stack_trace_print(addr, have_addr, count, modif, pr);
1374 1.32 lukem }
1375 1.32 lukem
1376 1.64 simonb static void
1377 1.94 matt db_sync_cmd(db_expr_t addr, bool have_addr,
1378 1.91 christos db_expr_t count, const char *modif)
1379 1.32 lukem {
1380 1.64 simonb
1381 1.47 sommerfe /*
1382 1.47 sommerfe * We are leaving DDB, never to return upward.
1383 1.47 sommerfe * Clear db_recover so that we can debug faults in functions
1384 1.47 sommerfe * called from cpu_reboot.
1385 1.47 sommerfe */
1386 1.47 sommerfe db_recover = 0;
1387 1.113 martin panicstr = "dump forced via kernel debugger";
1388 1.32 lukem cpu_reboot(RB_DUMP, NULL);
1389 1.1 cgd }
1390 1.112 yamt
1391 1.112 yamt /*
1392 1.112 yamt * Describe what an address is
1393 1.112 yamt */
1394 1.112 yamt void
1395 1.112 yamt db_whatis_cmd(db_expr_t address, bool have_addr,
1396 1.112 yamt db_expr_t count, const char *modif)
1397 1.112 yamt {
1398 1.112 yamt const uintptr_t addr = (uintptr_t)address;
1399 1.112 yamt
1400 1.112 yamt lwp_whatis(addr, db_printf);
1401 1.112 yamt pool_whatis(addr, db_printf);
1402 1.112 yamt vmem_whatis(addr, db_printf);
1403 1.112 yamt uvm_whatis(addr, db_printf);
1404 1.112 yamt }
1405