acpi_ec.c revision 1.73.4.1 1 /* $NetBSD: acpi_ec.c,v 1.73.4.1 2015/04/06 15:18:08 skrll Exp $ */
2
3 /*-
4 * Copyright (c) 2007 Joerg Sonnenberger <joerg (at) NetBSD.org>.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
16 * distribution.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
20 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
21 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
22 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
23 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
24 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
25 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
26 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
27 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
28 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * SUCH DAMAGE.
30 */
31
32 /*
33 * The ACPI Embedded Controller (EC) driver serves two different purposes:
34 * - read and write access from ASL, e.g. to read battery state
35 * - notification of ASL of System Control Interrupts.
36 *
37 * Access to the EC is serialised by sc_access_mtx and optionally the
38 * ACPI global mutex. Both locks are held until the request is fulfilled.
39 * All access to the softc has to hold sc_mtx to serialise against the GPE
40 * handler and the callout. sc_mtx is also used for wakeup conditions.
41 *
42 * SCIs are processed in a kernel thread. Handling gets a bit complicated
43 * by the lock order (sc_mtx must be acquired after sc_access_mtx and the
44 * ACPI global mutex).
45 *
46 * Read and write requests spin around for a short time as many requests
47 * can be handled instantly by the EC. During normal processing interrupt
48 * mode is used exclusively. At boot and resume time interrupts are not
49 * working and the handlers just busy loop.
50 *
51 * A callout is scheduled to compensate for missing interrupts on some
52 * hardware. If the EC doesn't process a request for 5s, it is most likely
53 * in a wedged state. No method to reset the EC is currently known.
54 *
55 * Special care has to be taken to not poll the EC in a busy loop without
56 * delay. This can prevent processing of Power Button events. At least some
57 * Lenovo Thinkpads seem to be implement the Power Button Override in the EC
58 * and the only option to recover on those models is to cut off all power.
59 */
60
61 #include <sys/cdefs.h>
62 __KERNEL_RCSID(0, "$NetBSD: acpi_ec.c,v 1.73.4.1 2015/04/06 15:18:08 skrll Exp $");
63
64 #include <sys/param.h>
65 #include <sys/callout.h>
66 #include <sys/condvar.h>
67 #include <sys/device.h>
68 #include <sys/kernel.h>
69 #include <sys/kthread.h>
70 #include <sys/mutex.h>
71 #include <sys/systm.h>
72
73 #include <dev/acpi/acpireg.h>
74 #include <dev/acpi/acpivar.h>
75 #include <dev/acpi/acpi_ecvar.h>
76
77 #define _COMPONENT ACPI_EC_COMPONENT
78 ACPI_MODULE_NAME ("acpi_ec")
79
80 /* Maximum time to wait for global ACPI lock in ms */
81 #define EC_LOCK_TIMEOUT 5
82
83 /* Maximum time to poll for completion of a command in ms */
84 #define EC_POLL_TIMEOUT 5
85
86 /* Maximum time to give a single EC command in s */
87 #define EC_CMD_TIMEOUT 10
88
89 /* From ACPI 3.0b, chapter 12.3 */
90 #define EC_COMMAND_READ 0x80
91 #define EC_COMMAND_WRITE 0x81
92 #define EC_COMMAND_BURST_EN 0x82
93 #define EC_COMMAND_BURST_DIS 0x83
94 #define EC_COMMAND_QUERY 0x84
95
96 /* From ACPI 3.0b, chapter 12.2.1 */
97 #define EC_STATUS_OBF 0x01
98 #define EC_STATUS_IBF 0x02
99 #define EC_STATUS_CMD 0x08
100 #define EC_STATUS_BURST 0x10
101 #define EC_STATUS_SCI 0x20
102 #define EC_STATUS_SMI 0x40
103
104 static const char *ec_hid[] = {
105 "PNP0C09",
106 NULL,
107 };
108
109 enum ec_state_t {
110 EC_STATE_QUERY,
111 EC_STATE_QUERY_VAL,
112 EC_STATE_READ,
113 EC_STATE_READ_ADDR,
114 EC_STATE_READ_VAL,
115 EC_STATE_WRITE,
116 EC_STATE_WRITE_ADDR,
117 EC_STATE_WRITE_VAL,
118 EC_STATE_FREE
119 };
120
121 struct acpiec_softc {
122 ACPI_HANDLE sc_ech;
123
124 ACPI_HANDLE sc_gpeh;
125 uint8_t sc_gpebit;
126
127 bus_space_tag_t sc_data_st;
128 bus_space_handle_t sc_data_sh;
129
130 bus_space_tag_t sc_csr_st;
131 bus_space_handle_t sc_csr_sh;
132
133 bool sc_need_global_lock;
134 uint32_t sc_global_lock;
135
136 kmutex_t sc_mtx, sc_access_mtx;
137 kcondvar_t sc_cv, sc_cv_sci;
138 enum ec_state_t sc_state;
139 bool sc_got_sci;
140 callout_t sc_pseudo_intr;
141
142 uint8_t sc_cur_addr, sc_cur_val;
143 };
144
145 static int acpiecdt_match(device_t, cfdata_t, void *);
146 static void acpiecdt_attach(device_t, device_t, void *);
147
148 static int acpiec_match(device_t, cfdata_t, void *);
149 static void acpiec_attach(device_t, device_t, void *);
150
151 static void acpiec_common_attach(device_t, device_t, ACPI_HANDLE,
152 bus_space_tag_t, bus_addr_t, bus_space_tag_t, bus_addr_t,
153 ACPI_HANDLE, uint8_t);
154
155 static bool acpiec_suspend(device_t, const pmf_qual_t *);
156 static bool acpiec_resume(device_t, const pmf_qual_t *);
157 static bool acpiec_shutdown(device_t, int);
158
159 static bool acpiec_parse_gpe_package(device_t, ACPI_HANDLE,
160 ACPI_HANDLE *, uint8_t *);
161
162 static void acpiec_callout(void *);
163 static void acpiec_gpe_query(void *);
164 static uint32_t acpiec_gpe_handler(ACPI_HANDLE, uint32_t, void *);
165 static ACPI_STATUS acpiec_space_setup(ACPI_HANDLE, uint32_t, void *, void **);
166 static ACPI_STATUS acpiec_space_handler(uint32_t, ACPI_PHYSICAL_ADDRESS,
167 uint32_t, ACPI_INTEGER *, void *, void *);
168
169 static void acpiec_gpe_state_machine(device_t);
170
171 CFATTACH_DECL_NEW(acpiec, sizeof(struct acpiec_softc),
172 acpiec_match, acpiec_attach, NULL, NULL);
173
174 CFATTACH_DECL_NEW(acpiecdt, sizeof(struct acpiec_softc),
175 acpiecdt_match, acpiecdt_attach, NULL, NULL);
176
177 static device_t ec_singleton = NULL;
178 static bool acpiec_cold = false;
179
180 static bool
181 acpiecdt_find(device_t parent, ACPI_HANDLE *ec_handle,
182 bus_addr_t *cmd_reg, bus_addr_t *data_reg, uint8_t *gpebit)
183 {
184 ACPI_TABLE_ECDT *ecdt;
185 ACPI_STATUS rv;
186
187 rv = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt);
188 if (ACPI_FAILURE(rv))
189 return false;
190
191 if (ecdt->Control.BitWidth != 8 || ecdt->Data.BitWidth != 8) {
192 aprint_error_dev(parent,
193 "ECDT register width invalid (%u/%u)\n",
194 ecdt->Control.BitWidth, ecdt->Data.BitWidth);
195 return false;
196 }
197
198 rv = AcpiGetHandle(ACPI_ROOT_OBJECT, ecdt->Id, ec_handle);
199 if (ACPI_FAILURE(rv)) {
200 aprint_error_dev(parent,
201 "failed to look up EC object %s: %s\n",
202 ecdt->Id, AcpiFormatException(rv));
203 return false;
204 }
205
206 *cmd_reg = ecdt->Control.Address;
207 *data_reg = ecdt->Data.Address;
208 *gpebit = ecdt->Gpe;
209
210 return true;
211 }
212
213 static int
214 acpiecdt_match(device_t parent, cfdata_t match, void *aux)
215 {
216 ACPI_HANDLE ec_handle;
217 bus_addr_t cmd_reg, data_reg;
218 uint8_t gpebit;
219
220 if (acpiecdt_find(parent, &ec_handle, &cmd_reg, &data_reg, &gpebit))
221 return 1;
222 else
223 return 0;
224 }
225
226 static void
227 acpiecdt_attach(device_t parent, device_t self, void *aux)
228 {
229 struct acpibus_attach_args *aa = aux;
230 ACPI_HANDLE ec_handle;
231 bus_addr_t cmd_reg, data_reg;
232 uint8_t gpebit;
233
234 if (!acpiecdt_find(parent, &ec_handle, &cmd_reg, &data_reg, &gpebit))
235 panic("ECDT disappeared");
236
237 aprint_naive("\n");
238 aprint_normal(": ACPI Embedded Controller via ECDT\n");
239
240 acpiec_common_attach(parent, self, ec_handle, aa->aa_iot, cmd_reg,
241 aa->aa_iot, data_reg, NULL, gpebit);
242 }
243
244 static int
245 acpiec_match(device_t parent, cfdata_t match, void *aux)
246 {
247 struct acpi_attach_args *aa = aux;
248
249 if (aa->aa_node->ad_type != ACPI_TYPE_DEVICE)
250 return 0;
251
252 return acpi_match_hid(aa->aa_node->ad_devinfo, ec_hid);
253 }
254
255 static void
256 acpiec_attach(device_t parent, device_t self, void *aux)
257 {
258 struct acpi_attach_args *aa = aux;
259 struct acpi_resources ec_res;
260 struct acpi_io *io0, *io1;
261 ACPI_HANDLE gpe_handle;
262 uint8_t gpebit;
263 ACPI_STATUS rv;
264
265 if (ec_singleton != NULL) {
266 aprint_naive(": using %s\n", device_xname(ec_singleton));
267 aprint_normal(": using %s\n", device_xname(ec_singleton));
268 goto fail0;
269 }
270 aprint_naive("\n");
271 aprint_normal("\n");
272
273 if (!acpiec_parse_gpe_package(self, aa->aa_node->ad_handle,
274 &gpe_handle, &gpebit))
275 goto fail0;
276
277 rv = acpi_resource_parse(self, aa->aa_node->ad_handle, "_CRS",
278 &ec_res, &acpi_resource_parse_ops_default);
279 if (rv != AE_OK) {
280 aprint_error_dev(self, "resource parsing failed: %s\n",
281 AcpiFormatException(rv));
282 goto fail0;
283 }
284
285 if ((io0 = acpi_res_io(&ec_res, 0)) == NULL) {
286 aprint_error_dev(self, "no data register resource\n");
287 goto fail1;
288 }
289 if ((io1 = acpi_res_io(&ec_res, 1)) == NULL) {
290 aprint_error_dev(self, "no CSR register resource\n");
291 goto fail1;
292 }
293
294 acpiec_common_attach(parent, self, aa->aa_node->ad_handle,
295 aa->aa_iot, io1->ar_base, aa->aa_iot, io0->ar_base,
296 gpe_handle, gpebit);
297
298 acpi_resource_cleanup(&ec_res);
299 return;
300
301 fail1: acpi_resource_cleanup(&ec_res);
302 fail0: if (!pmf_device_register(self, NULL, NULL))
303 aprint_error_dev(self, "couldn't establish power handler\n");
304 }
305
306 static void
307 acpiec_common_attach(device_t parent, device_t self,
308 ACPI_HANDLE ec_handle, bus_space_tag_t cmdt, bus_addr_t cmd_reg,
309 bus_space_tag_t datat, bus_addr_t data_reg,
310 ACPI_HANDLE gpe_handle, uint8_t gpebit)
311 {
312 struct acpiec_softc *sc = device_private(self);
313 ACPI_STATUS rv;
314 ACPI_INTEGER val;
315
316 sc->sc_csr_st = cmdt;
317 sc->sc_data_st = datat;
318
319 sc->sc_ech = ec_handle;
320 sc->sc_gpeh = gpe_handle;
321 sc->sc_gpebit = gpebit;
322
323 sc->sc_state = EC_STATE_FREE;
324 mutex_init(&sc->sc_mtx, MUTEX_DRIVER, IPL_TTY);
325 mutex_init(&sc->sc_access_mtx, MUTEX_DEFAULT, IPL_NONE);
326 cv_init(&sc->sc_cv, "eccv");
327 cv_init(&sc->sc_cv_sci, "ecsci");
328
329 if (bus_space_map(sc->sc_data_st, data_reg, 1, 0,
330 &sc->sc_data_sh) != 0) {
331 aprint_error_dev(self, "unable to map data register\n");
332 return;
333 }
334
335 if (bus_space_map(sc->sc_csr_st, cmd_reg, 1, 0, &sc->sc_csr_sh) != 0) {
336 aprint_error_dev(self, "unable to map CSR register\n");
337 goto post_data_map;
338 }
339
340 rv = acpi_eval_integer(sc->sc_ech, "_GLK", &val);
341 if (rv == AE_OK) {
342 sc->sc_need_global_lock = val != 0;
343 } else if (rv != AE_NOT_FOUND) {
344 aprint_error_dev(self, "unable to evaluate _GLK: %s\n",
345 AcpiFormatException(rv));
346 goto post_csr_map;
347 } else {
348 sc->sc_need_global_lock = false;
349 }
350 if (sc->sc_need_global_lock)
351 aprint_normal_dev(self, "using global ACPI lock\n");
352
353 callout_init(&sc->sc_pseudo_intr, CALLOUT_MPSAFE);
354 callout_setfunc(&sc->sc_pseudo_intr, acpiec_callout, self);
355
356 rv = AcpiInstallAddressSpaceHandler(sc->sc_ech, ACPI_ADR_SPACE_EC,
357 acpiec_space_handler, acpiec_space_setup, self);
358 if (rv != AE_OK) {
359 aprint_error_dev(self,
360 "unable to install address space handler: %s\n",
361 AcpiFormatException(rv));
362 goto post_csr_map;
363 }
364
365 rv = AcpiInstallGpeHandler(sc->sc_gpeh, sc->sc_gpebit,
366 ACPI_GPE_EDGE_TRIGGERED, acpiec_gpe_handler, self);
367 if (rv != AE_OK) {
368 aprint_error_dev(self, "unable to install GPE handler: %s\n",
369 AcpiFormatException(rv));
370 goto post_csr_map;
371 }
372
373 rv = AcpiEnableGpe(sc->sc_gpeh, sc->sc_gpebit);
374 if (rv != AE_OK) {
375 aprint_error_dev(self, "unable to enable GPE: %s\n",
376 AcpiFormatException(rv));
377 goto post_csr_map;
378 }
379
380 if (kthread_create(PRI_NONE, KTHREAD_MPSAFE, NULL, acpiec_gpe_query,
381 self, NULL, "acpiec sci thread")) {
382 aprint_error_dev(self, "unable to create query kthread\n");
383 goto post_csr_map;
384 }
385
386 ec_singleton = self;
387
388 if (!pmf_device_register1(self, acpiec_suspend, acpiec_resume,
389 acpiec_shutdown))
390 aprint_error_dev(self, "couldn't establish power handler\n");
391
392 return;
393
394 post_csr_map:
395 (void)AcpiRemoveGpeHandler(sc->sc_gpeh, sc->sc_gpebit,
396 acpiec_gpe_handler);
397 (void)AcpiRemoveAddressSpaceHandler(sc->sc_ech,
398 ACPI_ADR_SPACE_EC, acpiec_space_handler);
399 bus_space_unmap(sc->sc_csr_st, sc->sc_csr_sh, 1);
400 post_data_map:
401 bus_space_unmap(sc->sc_data_st, sc->sc_data_sh, 1);
402 if (!pmf_device_register(self, NULL, NULL))
403 aprint_error_dev(self, "couldn't establish power handler\n");
404 }
405
406 static bool
407 acpiec_suspend(device_t dv, const pmf_qual_t *qual)
408 {
409 acpiec_cold = true;
410
411 return true;
412 }
413
414 static bool
415 acpiec_resume(device_t dv, const pmf_qual_t *qual)
416 {
417 acpiec_cold = false;
418
419 return true;
420 }
421
422 static bool
423 acpiec_shutdown(device_t dv, int how)
424 {
425
426 acpiec_cold = true;
427 return true;
428 }
429
430 static bool
431 acpiec_parse_gpe_package(device_t self, ACPI_HANDLE ec_handle,
432 ACPI_HANDLE *gpe_handle, uint8_t *gpebit)
433 {
434 ACPI_BUFFER buf;
435 ACPI_OBJECT *p, *c;
436 ACPI_STATUS rv;
437
438 rv = acpi_eval_struct(ec_handle, "_GPE", &buf);
439 if (rv != AE_OK) {
440 aprint_error_dev(self, "unable to evaluate _GPE: %s\n",
441 AcpiFormatException(rv));
442 return false;
443 }
444
445 p = buf.Pointer;
446
447 if (p->Type == ACPI_TYPE_INTEGER) {
448 *gpe_handle = NULL;
449 *gpebit = p->Integer.Value;
450 ACPI_FREE(p);
451 return true;
452 }
453
454 if (p->Type != ACPI_TYPE_PACKAGE) {
455 aprint_error_dev(self, "_GPE is neither integer nor package\n");
456 ACPI_FREE(p);
457 return false;
458 }
459
460 if (p->Package.Count != 2) {
461 aprint_error_dev(self, "_GPE package does not contain 2 elements\n");
462 ACPI_FREE(p);
463 return false;
464 }
465
466 c = &p->Package.Elements[0];
467 rv = acpi_eval_reference_handle(c, gpe_handle);
468
469 if (ACPI_FAILURE(rv)) {
470 aprint_error_dev(self, "failed to evaluate _GPE handle\n");
471 ACPI_FREE(p);
472 return false;
473 }
474
475 c = &p->Package.Elements[1];
476
477 if (c->Type != ACPI_TYPE_INTEGER) {
478 aprint_error_dev(self,
479 "_GPE package needs integer as 2nd field\n");
480 ACPI_FREE(p);
481 return false;
482 }
483 *gpebit = c->Integer.Value;
484 ACPI_FREE(p);
485 return true;
486 }
487
488 static uint8_t
489 acpiec_read_data(struct acpiec_softc *sc)
490 {
491 return bus_space_read_1(sc->sc_data_st, sc->sc_data_sh, 0);
492 }
493
494 static void
495 acpiec_write_data(struct acpiec_softc *sc, uint8_t val)
496 {
497 bus_space_write_1(sc->sc_data_st, sc->sc_data_sh, 0, val);
498 }
499
500 static uint8_t
501 acpiec_read_status(struct acpiec_softc *sc)
502 {
503 return bus_space_read_1(sc->sc_csr_st, sc->sc_csr_sh, 0);
504 }
505
506 static void
507 acpiec_write_command(struct acpiec_softc *sc, uint8_t cmd)
508 {
509 bus_space_write_1(sc->sc_csr_st, sc->sc_csr_sh, 0, cmd);
510 }
511
512 static ACPI_STATUS
513 acpiec_space_setup(ACPI_HANDLE region, uint32_t func, void *arg,
514 void **region_arg)
515 {
516 if (func == ACPI_REGION_DEACTIVATE)
517 *region_arg = NULL;
518 else
519 *region_arg = arg;
520
521 return AE_OK;
522 }
523
524 static void
525 acpiec_lock(device_t dv)
526 {
527 struct acpiec_softc *sc = device_private(dv);
528 ACPI_STATUS rv;
529
530 mutex_enter(&sc->sc_access_mtx);
531
532 if (sc->sc_need_global_lock) {
533 rv = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->sc_global_lock);
534 if (rv != AE_OK) {
535 aprint_error_dev(dv, "failed to acquire global lock: %s\n",
536 AcpiFormatException(rv));
537 return;
538 }
539 }
540 }
541
542 static void
543 acpiec_unlock(device_t dv)
544 {
545 struct acpiec_softc *sc = device_private(dv);
546 ACPI_STATUS rv;
547
548 if (sc->sc_need_global_lock) {
549 rv = AcpiReleaseGlobalLock(sc->sc_global_lock);
550 if (rv != AE_OK) {
551 aprint_error_dev(dv, "failed to release global lock: %s\n",
552 AcpiFormatException(rv));
553 }
554 }
555 mutex_exit(&sc->sc_access_mtx);
556 }
557
558 static ACPI_STATUS
559 acpiec_read(device_t dv, uint8_t addr, uint8_t *val)
560 {
561 struct acpiec_softc *sc = device_private(dv);
562 int i, timeo = 1000 * EC_CMD_TIMEOUT;
563
564 acpiec_lock(dv);
565 mutex_enter(&sc->sc_mtx);
566
567 sc->sc_cur_addr = addr;
568 sc->sc_state = EC_STATE_READ;
569
570 for (i = 0; i < EC_POLL_TIMEOUT; ++i) {
571 acpiec_gpe_state_machine(dv);
572 if (sc->sc_state == EC_STATE_FREE)
573 goto done;
574 delay(1);
575 }
576
577 if (cold || acpiec_cold) {
578 while (sc->sc_state != EC_STATE_FREE && timeo-- > 0) {
579 delay(1000);
580 acpiec_gpe_state_machine(dv);
581 }
582 if (sc->sc_state != EC_STATE_FREE) {
583 mutex_exit(&sc->sc_mtx);
584 acpiec_unlock(dv);
585 aprint_error_dev(dv, "command timed out, state %d\n",
586 sc->sc_state);
587 return AE_ERROR;
588 }
589 } else if (cv_timedwait(&sc->sc_cv, &sc->sc_mtx, EC_CMD_TIMEOUT * hz)) {
590 mutex_exit(&sc->sc_mtx);
591 acpiec_unlock(dv);
592 aprint_error_dev(dv, "command takes over %d sec...\n", EC_CMD_TIMEOUT);
593 return AE_ERROR;
594 }
595
596 done:
597 *val = sc->sc_cur_val;
598
599 mutex_exit(&sc->sc_mtx);
600 acpiec_unlock(dv);
601 return AE_OK;
602 }
603
604 static ACPI_STATUS
605 acpiec_write(device_t dv, uint8_t addr, uint8_t val)
606 {
607 struct acpiec_softc *sc = device_private(dv);
608 int i, timeo = 1000 * EC_CMD_TIMEOUT;
609
610 acpiec_lock(dv);
611 mutex_enter(&sc->sc_mtx);
612
613 sc->sc_cur_addr = addr;
614 sc->sc_cur_val = val;
615 sc->sc_state = EC_STATE_WRITE;
616
617 for (i = 0; i < EC_POLL_TIMEOUT; ++i) {
618 acpiec_gpe_state_machine(dv);
619 if (sc->sc_state == EC_STATE_FREE)
620 goto done;
621 delay(1);
622 }
623
624 if (cold || acpiec_cold) {
625 while (sc->sc_state != EC_STATE_FREE && timeo-- > 0) {
626 delay(1000);
627 acpiec_gpe_state_machine(dv);
628 }
629 if (sc->sc_state != EC_STATE_FREE) {
630 mutex_exit(&sc->sc_mtx);
631 acpiec_unlock(dv);
632 aprint_error_dev(dv, "command timed out, state %d\n",
633 sc->sc_state);
634 return AE_ERROR;
635 }
636 } else if (cv_timedwait(&sc->sc_cv, &sc->sc_mtx, EC_CMD_TIMEOUT * hz)) {
637 mutex_exit(&sc->sc_mtx);
638 acpiec_unlock(dv);
639 aprint_error_dev(dv, "command takes over %d sec...\n", EC_CMD_TIMEOUT);
640 return AE_ERROR;
641 }
642
643 done:
644 mutex_exit(&sc->sc_mtx);
645 acpiec_unlock(dv);
646 return AE_OK;
647 }
648
649 static ACPI_STATUS
650 acpiec_space_handler(uint32_t func, ACPI_PHYSICAL_ADDRESS paddr,
651 uint32_t width, ACPI_INTEGER *value, void *arg, void *region_arg)
652 {
653 device_t dv;
654 ACPI_STATUS rv;
655 uint8_t addr, reg;
656 unsigned int i;
657
658 if (paddr > 0xff || width % 8 != 0 || value == NULL || arg == NULL ||
659 paddr + width / 8 > 0x100)
660 return AE_BAD_PARAMETER;
661
662 addr = paddr;
663 dv = arg;
664
665 rv = AE_OK;
666
667 switch (func) {
668 case ACPI_READ:
669 *value = 0;
670 for (i = 0; i < width; i += 8, ++addr) {
671 rv = acpiec_read(dv, addr, ®);
672 if (rv != AE_OK)
673 break;
674 *value |= (ACPI_INTEGER)reg << i;
675 }
676 break;
677 case ACPI_WRITE:
678 for (i = 0; i < width; i += 8, ++addr) {
679 reg = (*value >>i) & 0xff;
680 rv = acpiec_write(dv, addr, reg);
681 if (rv != AE_OK)
682 break;
683 }
684 break;
685 default:
686 aprint_error("%s: invalid Address Space function called: %x\n",
687 device_xname(dv), (unsigned int)func);
688 return AE_BAD_PARAMETER;
689 }
690
691 return rv;
692 }
693
694 static void
695 acpiec_gpe_query(void *arg)
696 {
697 device_t dv = arg;
698 struct acpiec_softc *sc = device_private(dv);
699 uint8_t reg;
700 char qxx[5];
701 ACPI_STATUS rv;
702 int i;
703
704 loop:
705 mutex_enter(&sc->sc_mtx);
706
707 if (sc->sc_got_sci == false)
708 cv_wait(&sc->sc_cv_sci, &sc->sc_mtx);
709 mutex_exit(&sc->sc_mtx);
710
711 acpiec_lock(dv);
712 mutex_enter(&sc->sc_mtx);
713
714 /* The Query command can always be issued, so be defensive here. */
715 sc->sc_got_sci = false;
716 sc->sc_state = EC_STATE_QUERY;
717
718 for (i = 0; i < EC_POLL_TIMEOUT; ++i) {
719 acpiec_gpe_state_machine(dv);
720 if (sc->sc_state == EC_STATE_FREE)
721 goto done;
722 delay(1);
723 }
724
725 cv_wait(&sc->sc_cv, &sc->sc_mtx);
726
727 done:
728 reg = sc->sc_cur_val;
729
730 mutex_exit(&sc->sc_mtx);
731 acpiec_unlock(dv);
732
733 if (reg == 0)
734 goto loop; /* Spurious query result */
735
736 /*
737 * Evaluate _Qxx to respond to the controller.
738 */
739 snprintf(qxx, sizeof(qxx), "_Q%02X", (unsigned int)reg);
740 rv = AcpiEvaluateObject(sc->sc_ech, qxx, NULL, NULL);
741 if (rv != AE_OK && rv != AE_NOT_FOUND) {
742 aprint_error_dev(dv, "GPE query method %s failed: %s",
743 qxx, AcpiFormatException(rv));
744 }
745
746 goto loop;
747 }
748
749 static void
750 acpiec_gpe_state_machine(device_t dv)
751 {
752 struct acpiec_softc *sc = device_private(dv);
753 uint8_t reg;
754
755 reg = acpiec_read_status(sc);
756
757 if (reg & EC_STATUS_SCI)
758 sc->sc_got_sci = true;
759
760 switch (sc->sc_state) {
761 case EC_STATE_QUERY:
762 if ((reg & EC_STATUS_IBF) != 0)
763 break; /* Nothing of interest here. */
764 acpiec_write_command(sc, EC_COMMAND_QUERY);
765 sc->sc_state = EC_STATE_QUERY_VAL;
766 break;
767
768 case EC_STATE_QUERY_VAL:
769 if ((reg & EC_STATUS_OBF) == 0)
770 break; /* Nothing of interest here. */
771
772 sc->sc_cur_val = acpiec_read_data(sc);
773 sc->sc_state = EC_STATE_FREE;
774
775 cv_signal(&sc->sc_cv);
776 break;
777
778 case EC_STATE_READ:
779 if ((reg & EC_STATUS_IBF) != 0)
780 break; /* Nothing of interest here. */
781
782 acpiec_write_command(sc, EC_COMMAND_READ);
783 sc->sc_state = EC_STATE_READ_ADDR;
784 break;
785
786 case EC_STATE_READ_ADDR:
787 if ((reg & EC_STATUS_IBF) != 0)
788 break; /* Nothing of interest here. */
789
790 acpiec_write_data(sc, sc->sc_cur_addr);
791 sc->sc_state = EC_STATE_READ_VAL;
792 break;
793
794 case EC_STATE_READ_VAL:
795 if ((reg & EC_STATUS_OBF) == 0)
796 break; /* Nothing of interest here. */
797 sc->sc_cur_val = acpiec_read_data(sc);
798 sc->sc_state = EC_STATE_FREE;
799
800 cv_signal(&sc->sc_cv);
801 break;
802
803 case EC_STATE_WRITE:
804 if ((reg & EC_STATUS_IBF) != 0)
805 break; /* Nothing of interest here. */
806
807 acpiec_write_command(sc, EC_COMMAND_WRITE);
808 sc->sc_state = EC_STATE_WRITE_ADDR;
809 break;
810
811 case EC_STATE_WRITE_ADDR:
812 if ((reg & EC_STATUS_IBF) != 0)
813 break; /* Nothing of interest here. */
814 acpiec_write_data(sc, sc->sc_cur_addr);
815 sc->sc_state = EC_STATE_WRITE_VAL;
816 break;
817
818 case EC_STATE_WRITE_VAL:
819 if ((reg & EC_STATUS_IBF) != 0)
820 break; /* Nothing of interest here. */
821 sc->sc_state = EC_STATE_FREE;
822 cv_signal(&sc->sc_cv);
823
824 acpiec_write_data(sc, sc->sc_cur_val);
825 break;
826
827 case EC_STATE_FREE:
828 if (sc->sc_got_sci)
829 cv_signal(&sc->sc_cv_sci);
830 break;
831 default:
832 panic("invalid state");
833 }
834
835 if (sc->sc_state != EC_STATE_FREE)
836 callout_schedule(&sc->sc_pseudo_intr, 1);
837 }
838
839 static void
840 acpiec_callout(void *arg)
841 {
842 device_t dv = arg;
843 struct acpiec_softc *sc = device_private(dv);
844
845 mutex_enter(&sc->sc_mtx);
846 acpiec_gpe_state_machine(dv);
847 mutex_exit(&sc->sc_mtx);
848 }
849
850 static uint32_t
851 acpiec_gpe_handler(ACPI_HANDLE hdl, uint32_t gpebit, void *arg)
852 {
853 device_t dv = arg;
854 struct acpiec_softc *sc = device_private(dv);
855
856 mutex_enter(&sc->sc_mtx);
857 acpiec_gpe_state_machine(dv);
858 mutex_exit(&sc->sc_mtx);
859
860 return ACPI_INTERRUPT_HANDLED | ACPI_REENABLE_GPE;
861 }
862
863 ACPI_STATUS
864 acpiec_bus_read(device_t dv, u_int addr, ACPI_INTEGER *val, int width)
865 {
866 return acpiec_space_handler(ACPI_READ, addr, width * 8, val, dv, NULL);
867 }
868
869 ACPI_STATUS
870 acpiec_bus_write(device_t dv, u_int addr, ACPI_INTEGER val, int width)
871 {
872 return acpiec_space_handler(ACPI_WRITE, addr, width * 8, &val, dv, NULL);
873 }
874
875 ACPI_HANDLE
876 acpiec_get_handle(device_t dv)
877 {
878 struct acpiec_softc *sc = device_private(dv);
879
880 return sc->sc_ech;
881 }
882