com_acpi.c revision 1.27.4.2 1 /* $NetBSD: com_acpi.c,v 1.27.4.2 2009/07/18 14:52:59 yamt Exp $ */
2
3 /*
4 * Copyright (c) 2002 Jared D. McNeill <jmcneill (at) invisible.ca>
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. The name of the author may not be used to endorse or promote products
13 * derived from this software without specific prior written permission.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
20 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
21 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
22 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
23 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28 #include <sys/cdefs.h>
29 __KERNEL_RCSID(0, "$NetBSD: com_acpi.c,v 1.27.4.2 2009/07/18 14:52:59 yamt Exp $");
30
31 #include <sys/param.h>
32 #include <sys/systm.h>
33 #include <sys/errno.h>
34 #include <sys/ioctl.h>
35 #include <sys/syslog.h>
36 #include <sys/device.h>
37 #include <sys/proc.h>
38 #include <sys/termios.h>
39
40 #include <sys/bus.h>
41
42 #include <dev/isa/isavar.h>
43 #include <dev/isa/isadmavar.h>
44
45 #include <dev/acpi/acpica.h>
46 #include <dev/acpi/acpireg.h>
47 #include <dev/acpi/acpivar.h>
48
49 #include <dev/ic/comvar.h>
50
51 static int com_acpi_match(device_t, cfdata_t , void *);
52 static void com_acpi_attach(device_t, device_t, void *);
53
54 struct com_acpi_softc {
55 struct com_softc sc_com;
56 void *sc_ih;
57 };
58
59 CFATTACH_DECL_NEW(com_acpi, sizeof(struct com_acpi_softc), com_acpi_match,
60 com_acpi_attach, NULL, com_activate);
61
62 /*
63 * Supported device IDs
64 */
65
66 static const char * const com_acpi_ids[] = {
67 "PNP0500", /* Standard PC COM port */
68 "PNP0501", /* 16550A-compatible COM port */
69 "PNP0510", /* Generic IRDA-compatible device */
70 "PNP0511", /* Generic IRDA-compatible device */
71 "IBM0071", /* IBM ThinkPad IRDA device */
72 "SMCF010", /* SMC SuperIO IRDA device */
73 "NSC6001", /* NSC IRDA device */
74 "FUJ02E6", /* Fujitsu Serial Pen Tablet */
75 NULL
76 };
77
78 /*
79 * com_acpi_match: autoconf(9) match routine
80 */
81 static int
82 com_acpi_match(device_t parent, cfdata_t match, void *aux)
83 {
84 struct acpi_attach_args *aa = aux;
85
86 if (aa->aa_node->ad_type != ACPI_TYPE_DEVICE)
87 return 0;
88
89 return acpi_match_hid(aa->aa_node->ad_devinfo,com_acpi_ids);
90 }
91
92 /*
93 * com_acpi_attach: autoconf(9) attach routine
94 */
95 static void
96 com_acpi_attach(device_t parent, device_t self, void *aux)
97 {
98 struct com_acpi_softc *asc = device_private(self);
99 struct com_softc *sc = &asc->sc_com;
100 struct acpi_attach_args *aa = aux;
101 struct acpi_resources res;
102 struct acpi_io *io;
103 struct acpi_mem *mem;
104 struct acpi_irq *irq;
105 bus_space_tag_t iot;
106 bus_space_handle_t ioh;
107 bus_addr_t base;
108 bus_size_t size;
109 ACPI_STATUS rv;
110
111 sc->sc_dev = self;
112
113 /* parse resources */
114 rv = acpi_resource_parse(sc->sc_dev, aa->aa_node->ad_handle, "_CRS",
115 &res, &acpi_resource_parse_ops_default);
116 if (ACPI_FAILURE(rv))
117 return;
118
119 /* find our i/o registers */
120 io = acpi_res_io(&res, 0);
121 if (io != NULL) {
122 iot = aa->aa_iot;
123 base = io->ar_base;
124 size = io->ar_length;
125 } else {
126 mem = acpi_res_mem(&res, 0);
127 if (mem != NULL) {
128 iot = aa->aa_memt;
129 base = mem->ar_base;
130 size = mem->ar_length;
131 } else {
132 aprint_error_dev(self,
133 "unable to find i/o register and memory resource\n");
134 goto out;
135 }
136 }
137
138 /* find our IRQ */
139 irq = acpi_res_irq(&res, 0);
140 if (irq == NULL) {
141 aprint_error_dev(self, "unable to find irq resource\n");
142 goto out;
143 }
144
145 if (!com_is_console(iot, base, &ioh))
146 if (bus_space_map(iot, base, size, 0, &ioh)) {
147 aprint_error_dev(self, "can't map i/o space\n");
148 goto out;
149 }
150 COM_INIT_REGS(sc->sc_regs, iot, ioh, base);
151
152 aprint_normal("%s", device_xname(self));
153
154 if (com_probe_subr(&sc->sc_regs) == 0) {
155 aprint_error(": com probe failed\n");
156 goto out;
157 }
158
159 sc->sc_frequency = 115200 * 16;
160
161 com_attach_subr(sc);
162
163 asc->sc_ih = isa_intr_establish(aa->aa_ic, irq->ar_irq,
164 (irq->ar_type == ACPI_EDGE_SENSITIVE) ? IST_EDGE : IST_LEVEL,
165 IPL_SERIAL, comintr, sc);
166
167 if (!pmf_device_register(self, NULL, com_resume))
168 aprint_error_dev(self, "couldn't establish a power handler\n");
169
170 out:
171 acpi_resource_cleanup(&res);
172 }
173