ata.c revision 1.145
1 /* $NetBSD: ata.c,v 1.145 2018/10/24 20:25:52 jdolecek Exp $ */ 2 3 /* 4 * Copyright (c) 1998, 2001 Manuel Bouyer. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __KERNEL_RCSID(0, "$NetBSD: ata.c,v 1.145 2018/10/24 20:25:52 jdolecek Exp $"); 29 30 #include "opt_ata.h" 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/kernel.h> 35 #include <sys/device.h> 36 #include <sys/conf.h> 37 #include <sys/fcntl.h> 38 #include <sys/proc.h> 39 #include <sys/kthread.h> 40 #include <sys/errno.h> 41 #include <sys/ataio.h> 42 #include <sys/kmem.h> 43 #include <sys/intr.h> 44 #include <sys/bus.h> 45 #include <sys/once.h> 46 #include <sys/bitops.h> 47 48 #define ATABUS_PRIVATE 49 50 #include <dev/ata/ataconf.h> 51 #include <dev/ata/atareg.h> 52 #include <dev/ata/atavar.h> 53 #include <dev/ic/wdcvar.h> /* for PIOBM */ 54 55 #include "ioconf.h" 56 #include "locators.h" 57 58 #include "atapibus.h" 59 #include "ataraid.h" 60 #include "sata_pmp.h" 61 62 #if NATARAID > 0 63 #include <dev/ata/ata_raidvar.h> 64 #endif 65 #if NSATA_PMP > 0 66 #include <dev/ata/satapmpvar.h> 67 #endif 68 #include <dev/ata/satapmpreg.h> 69 70 #define DEBUG_FUNCS 0x08 71 #define DEBUG_PROBE 0x10 72 #define DEBUG_DETACH 0x20 73 #define DEBUG_XFERS 0x40 74 #ifdef ATADEBUG 75 #ifndef ATADEBUG_MASK 76 #define ATADEBUG_MASK 0 77 #endif 78 int atadebug_mask = ATADEBUG_MASK; 79 #define ATADEBUG_PRINT(args, level) \ 80 if (atadebug_mask & (level)) \ 81 printf args 82 #else 83 #define ATADEBUG_PRINT(args, level) 84 #endif 85 86 static ONCE_DECL(ata_init_ctrl); 87 static struct pool ata_xfer_pool; 88 89 /* 90 * A queue of atabus instances, used to ensure the same bus probe order 91 * for a given hardware configuration at each boot. Kthread probing 92 * devices on a atabus. Only one probing at once. 93 */ 94 static TAILQ_HEAD(, atabus_initq) atabus_initq_head; 95 static kmutex_t atabus_qlock; 96 static kcondvar_t atabus_qcv; 97 static lwp_t * atabus_cfg_lwp; 98 99 /***************************************************************************** 100 * ATA bus layer. 101 * 102 * ATA controllers attach an atabus instance, which handles probing the bus 103 * for drives, etc. 104 *****************************************************************************/ 105 106 dev_type_open(atabusopen); 107 dev_type_close(atabusclose); 108 dev_type_ioctl(atabusioctl); 109 110 const struct cdevsw atabus_cdevsw = { 111 .d_open = atabusopen, 112 .d_close = atabusclose, 113 .d_read = noread, 114 .d_write = nowrite, 115 .d_ioctl = atabusioctl, 116 .d_stop = nostop, 117 .d_tty = notty, 118 .d_poll = nopoll, 119 .d_mmap = nommap, 120 .d_kqfilter = nokqfilter, 121 .d_discard = nodiscard, 122 .d_flag = D_OTHER 123 }; 124 125 static void atabus_childdetached(device_t, device_t); 126 static int atabus_rescan(device_t, const char *, const int *); 127 static bool atabus_resume(device_t, const pmf_qual_t *); 128 static bool atabus_suspend(device_t, const pmf_qual_t *); 129 static void atabusconfig_thread(void *); 130 131 static void ata_channel_idle(struct ata_channel *); 132 static void ata_activate_xfer_locked(struct ata_channel *, struct ata_xfer *); 133 static void ata_channel_freeze_locked(struct ata_channel *); 134 static void ata_thread_wake_locked(struct ata_channel *); 135 136 /* 137 * atabus_init: 138 * 139 * Initialize ATA subsystem structures. 140 */ 141 static int 142 atabus_init(void) 143 { 144 145 pool_init(&ata_xfer_pool, sizeof(struct ata_xfer), 0, 0, 0, 146 "ataspl", NULL, IPL_BIO); 147 TAILQ_INIT(&atabus_initq_head); 148 mutex_init(&atabus_qlock, MUTEX_DEFAULT, IPL_NONE); 149 cv_init(&atabus_qcv, "atainitq"); 150 return 0; 151 } 152 153 /* 154 * atabusprint: 155 * 156 * Autoconfiguration print routine used by ATA controllers when 157 * attaching an atabus instance. 158 */ 159 int 160 atabusprint(void *aux, const char *pnp) 161 { 162 struct ata_channel *chan = aux; 163 164 if (pnp) 165 aprint_normal("atabus at %s", pnp); 166 aprint_normal(" channel %d", chan->ch_channel); 167 168 return (UNCONF); 169 } 170 171 /* 172 * ataprint: 173 * 174 * Autoconfiguration print routine. 175 */ 176 int 177 ataprint(void *aux, const char *pnp) 178 { 179 struct ata_device *adev = aux; 180 181 if (pnp) 182 aprint_normal("wd at %s", pnp); 183 aprint_normal(" drive %d", adev->adev_drv_data->drive); 184 185 return (UNCONF); 186 } 187 188 /* 189 * ata_channel_attach: 190 * 191 * Common parts of attaching an atabus to an ATA controller channel. 192 */ 193 void 194 ata_channel_attach(struct ata_channel *chp) 195 { 196 if (chp->ch_flags & ATACH_DISABLED) 197 return; 198 199 ata_channel_init(chp); 200 201 KASSERT(chp->ch_queue != NULL); 202 203 chp->atabus = config_found_ia(chp->ch_atac->atac_dev, "ata", chp, 204 atabusprint); 205 } 206 207 /* 208 * ata_channel_detach: 209 * 210 * Common parts of detaching an atabus to an ATA controller channel. 211 */ 212 void 213 ata_channel_detach(struct ata_channel *chp) 214 { 215 if (chp->ch_flags & ATACH_DISABLED) 216 return; 217 218 ata_channel_destroy(chp); 219 220 chp->ch_flags |= ATACH_DETACHED; 221 } 222 223 static void 224 atabusconfig(struct atabus_softc *atabus_sc) 225 { 226 struct ata_channel *chp = atabus_sc->sc_chan; 227 struct atac_softc *atac = chp->ch_atac; 228 struct atabus_initq *atabus_initq = NULL; 229 int i, error; 230 231 /* we are in the atabus's thread context */ 232 ata_channel_lock(chp); 233 chp->ch_flags |= ATACH_TH_RUN; 234 ata_channel_unlock(chp); 235 236 /* 237 * Probe for the drives attached to controller, unless a PMP 238 * is already known 239 */ 240 /* XXX for SATA devices we will power up all drives at once */ 241 if (chp->ch_satapmp_nports == 0) 242 (*atac->atac_probe)(chp); 243 244 if (chp->ch_ndrives >= 2) { 245 ATADEBUG_PRINT(("atabusattach: ch_drive_type 0x%x 0x%x\n", 246 chp->ch_drive[0].drive_type, chp->ch_drive[1].drive_type), 247 DEBUG_PROBE); 248 } 249 250 /* next operations will occurs in a separate thread */ 251 ata_channel_lock(chp); 252 chp->ch_flags &= ~ATACH_TH_RUN; 253 ata_channel_unlock(chp); 254 255 /* Make sure the devices probe in atabus order to avoid jitter. */ 256 mutex_enter(&atabus_qlock); 257 for (;;) { 258 atabus_initq = TAILQ_FIRST(&atabus_initq_head); 259 if (atabus_initq->atabus_sc == atabus_sc) 260 break; 261 cv_wait(&atabus_qcv, &atabus_qlock); 262 } 263 mutex_exit(&atabus_qlock); 264 265 ata_channel_lock(chp); 266 267 /* If no drives, abort here */ 268 if (chp->ch_drive == NULL) 269 goto out; 270 KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL); 271 for (i = 0; i < chp->ch_ndrives; i++) 272 if (chp->ch_drive[i].drive_type != ATA_DRIVET_NONE) 273 break; 274 if (i == chp->ch_ndrives) 275 goto out; 276 277 /* Shortcut in case we've been shutdown */ 278 if (chp->ch_flags & ATACH_SHUTDOWN) 279 goto out; 280 281 ata_channel_unlock(chp); 282 283 if ((error = kthread_create(PRI_NONE, 0, NULL, atabusconfig_thread, 284 atabus_sc, &atabus_cfg_lwp, 285 "%scnf", device_xname(atac->atac_dev))) != 0) 286 aprint_error_dev(atac->atac_dev, 287 "unable to create config thread: error %d\n", error); 288 return; 289 290 out: 291 ata_channel_unlock(chp); 292 293 mutex_enter(&atabus_qlock); 294 TAILQ_REMOVE(&atabus_initq_head, atabus_initq, atabus_initq); 295 cv_broadcast(&atabus_qcv); 296 mutex_exit(&atabus_qlock); 297 298 kmem_free(atabus_initq, sizeof(*atabus_initq)); 299 300 ata_delref(chp); 301 302 config_pending_decr(atac->atac_dev); 303 } 304 305 /* 306 * atabus_configthread: finish attach of atabus's childrens, in a separate 307 * kernel thread. 308 */ 309 static void 310 atabusconfig_thread(void *arg) 311 { 312 struct atabus_softc *atabus_sc = arg; 313 struct ata_channel *chp = atabus_sc->sc_chan; 314 struct atac_softc *atac = chp->ch_atac; 315 struct atabus_initq *atabus_initq = NULL; 316 int i, s; 317 318 /* XXX seems wrong */ 319 mutex_enter(&atabus_qlock); 320 atabus_initq = TAILQ_FIRST(&atabus_initq_head); 321 KASSERT(atabus_initq->atabus_sc == atabus_sc); 322 mutex_exit(&atabus_qlock); 323 324 /* 325 * First look for a port multiplier 326 */ 327 if (chp->ch_ndrives == PMP_MAX_DRIVES && 328 chp->ch_drive[PMP_PORT_CTL].drive_type == ATA_DRIVET_PM) { 329 #if NSATA_PMP > 0 330 satapmp_attach(chp); 331 #else 332 aprint_error_dev(atabus_sc->sc_dev, 333 "SATA port multiplier not supported\n"); 334 /* no problems going on, all drives are ATA_DRIVET_NONE */ 335 #endif 336 } 337 338 /* 339 * Attach an ATAPI bus, if needed. 340 */ 341 KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL); 342 for (i = 0; i < chp->ch_ndrives && chp->atapibus == NULL; i++) { 343 if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATAPI) { 344 #if NATAPIBUS > 0 345 (*atac->atac_atapibus_attach)(atabus_sc); 346 #else 347 /* 348 * Fake the autoconfig "not configured" message 349 */ 350 aprint_normal("atapibus at %s not configured\n", 351 device_xname(atac->atac_dev)); 352 chp->atapibus = NULL; 353 s = splbio(); 354 for (i = 0; i < chp->ch_ndrives; i++) { 355 if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATAPI) 356 chp->ch_drive[i].drive_type = ATA_DRIVET_NONE; 357 } 358 splx(s); 359 #endif 360 break; 361 } 362 } 363 364 for (i = 0; i < chp->ch_ndrives; i++) { 365 struct ata_device adev; 366 if (chp->ch_drive[i].drive_type != ATA_DRIVET_ATA && 367 chp->ch_drive[i].drive_type != ATA_DRIVET_OLD) { 368 continue; 369 } 370 if (chp->ch_drive[i].drv_softc != NULL) 371 continue; 372 memset(&adev, 0, sizeof(struct ata_device)); 373 adev.adev_bustype = atac->atac_bustype_ata; 374 adev.adev_channel = chp->ch_channel; 375 adev.adev_drv_data = &chp->ch_drive[i]; 376 chp->ch_drive[i].drv_softc = config_found_ia(atabus_sc->sc_dev, 377 "ata_hl", &adev, ataprint); 378 if (chp->ch_drive[i].drv_softc != NULL) { 379 ata_probe_caps(&chp->ch_drive[i]); 380 } else { 381 s = splbio(); 382 chp->ch_drive[i].drive_type = ATA_DRIVET_NONE; 383 splx(s); 384 } 385 } 386 387 /* now that we know the drives, the controller can set its modes */ 388 if (atac->atac_set_modes) { 389 (*atac->atac_set_modes)(chp); 390 ata_print_modes(chp); 391 } 392 #if NATARAID > 0 393 if (atac->atac_cap & ATAC_CAP_RAID) { 394 for (i = 0; i < chp->ch_ndrives; i++) { 395 if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATA) { 396 ata_raid_check_component( 397 chp->ch_drive[i].drv_softc); 398 } 399 } 400 } 401 #endif /* NATARAID > 0 */ 402 403 /* 404 * reset drive_flags for unattached devices, reset state for attached 405 * ones 406 */ 407 s = splbio(); 408 for (i = 0; i < chp->ch_ndrives; i++) { 409 if (chp->ch_drive[i].drive_type == ATA_DRIVET_PM) 410 continue; 411 if (chp->ch_drive[i].drv_softc == NULL) { 412 chp->ch_drive[i].drive_flags = 0; 413 chp->ch_drive[i].drive_type = ATA_DRIVET_NONE; 414 } else 415 chp->ch_drive[i].state = 0; 416 } 417 splx(s); 418 419 mutex_enter(&atabus_qlock); 420 TAILQ_REMOVE(&atabus_initq_head, atabus_initq, atabus_initq); 421 cv_broadcast(&atabus_qcv); 422 mutex_exit(&atabus_qlock); 423 424 kmem_free(atabus_initq, sizeof(*atabus_initq)); 425 426 ata_delref(chp); 427 428 config_pending_decr(atac->atac_dev); 429 kthread_exit(0); 430 } 431 432 /* 433 * atabus_thread: 434 * 435 * Worker thread for the ATA bus. 436 */ 437 static void 438 atabus_thread(void *arg) 439 { 440 struct atabus_softc *sc = arg; 441 struct ata_channel *chp = sc->sc_chan; 442 struct ata_queue *chq = chp->ch_queue; 443 struct ata_xfer *xfer; 444 int i, rv; 445 446 ata_channel_lock(chp); 447 chp->ch_flags |= ATACH_TH_RUN; 448 449 /* 450 * Probe the drives. Reset type to indicate to controllers 451 * that can re-probe that all drives must be probed.. 452 * 453 * Note: ch_ndrives may be changed during the probe. 454 */ 455 KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL); 456 for (i = 0; i < chp->ch_ndrives; i++) { 457 chp->ch_drive[i].drive_flags = 0; 458 chp->ch_drive[i].drive_type = ATA_DRIVET_NONE; 459 } 460 ata_channel_unlock(chp); 461 462 atabusconfig(sc); 463 464 ata_channel_lock(chp); 465 for (;;) { 466 if ((chp->ch_flags & (ATACH_TH_RESET | ATACH_TH_DRIVE_RESET 467 | ATACH_TH_RECOVERY | ATACH_SHUTDOWN)) == 0 && 468 (chq->queue_active == 0 || chq->queue_freeze == 0)) { 469 chp->ch_flags &= ~ATACH_TH_RUN; 470 cv_wait(&chp->ch_thr_idle, &chp->ch_lock); 471 chp->ch_flags |= ATACH_TH_RUN; 472 } 473 if (chp->ch_flags & ATACH_SHUTDOWN) { 474 break; 475 } 476 if (chp->ch_flags & ATACH_TH_RESCAN) { 477 chp->ch_flags &= ~ATACH_TH_RESCAN; 478 ata_channel_unlock(chp); 479 atabusconfig(sc); 480 ata_channel_lock(chp); 481 } 482 if (chp->ch_flags & ATACH_TH_RESET) { 483 /* this will unfreeze the channel */ 484 ata_thread_run(chp, AT_WAIT, 485 ATACH_TH_RESET, ATACH_NODRIVE); 486 } else if (chp->ch_flags & ATACH_TH_DRIVE_RESET) { 487 /* this will unfreeze the channel */ 488 for (i = 0; i < chp->ch_ndrives; i++) { 489 struct ata_drive_datas *drvp; 490 491 drvp = &chp->ch_drive[i]; 492 493 if (drvp->drive_flags & ATA_DRIVE_TH_RESET) { 494 ata_thread_run(chp, 495 AT_WAIT, ATACH_TH_DRIVE_RESET, i); 496 } 497 } 498 chp->ch_flags &= ~ATACH_TH_DRIVE_RESET; 499 } else if (chp->ch_flags & ATACH_TH_RECOVERY) { 500 /* 501 * This will unfreeze the channel; drops locks during 502 * run, so must wrap in splbio()/splx() to avoid 503 * spurious interrupts. XXX MPSAFE 504 */ 505 int s = splbio(); 506 ata_thread_run(chp, AT_WAIT, ATACH_TH_RECOVERY, 507 chp->recovery_tfd); 508 splx(s); 509 } else if (chq->queue_active > 0 && chq->queue_freeze == 1) { 510 /* 511 * Caller has bumped queue_freeze, decrease it. This 512 * flow shalt never be executed for NCQ commands. 513 */ 514 KASSERT((chp->ch_flags & ATACH_NCQ) == 0); 515 KASSERT(chq->queue_active == 1); 516 517 ata_channel_thaw_locked(chp); 518 xfer = ata_queue_get_active_xfer_locked(chp); 519 520 KASSERT(xfer != NULL); 521 KASSERT((xfer->c_flags & C_POLL) == 0); 522 523 switch ((rv = ata_xfer_start(xfer))) { 524 case ATASTART_STARTED: 525 case ATASTART_POLL: 526 case ATASTART_ABORT: 527 break; 528 case ATASTART_TH: 529 default: 530 panic("%s: ata_xfer_start() unexpected rv %d", 531 __func__, rv); 532 /* NOTREACHED */ 533 } 534 } else if (chq->queue_freeze > 1) 535 panic("%s: queue_freeze", __func__); 536 537 /* Try to run down the queue once channel is unfrozen */ 538 if (chq->queue_freeze == 0) { 539 ata_channel_unlock(chp); 540 atastart(chp); 541 ata_channel_lock(chp); 542 } 543 } 544 chp->ch_thread = NULL; 545 cv_signal(&chp->ch_thr_idle); 546 ata_channel_unlock(chp); 547 kthread_exit(0); 548 } 549 550 static void 551 ata_thread_wake_locked(struct ata_channel *chp) 552 { 553 KASSERT(mutex_owned(&chp->ch_lock)); 554 ata_channel_freeze_locked(chp); 555 cv_signal(&chp->ch_thr_idle); 556 } 557 558 /* 559 * atabus_match: 560 * 561 * Autoconfiguration match routine. 562 */ 563 static int 564 atabus_match(device_t parent, cfdata_t cf, void *aux) 565 { 566 struct ata_channel *chp = aux; 567 568 if (chp == NULL) 569 return (0); 570 571 if (cf->cf_loc[ATACF_CHANNEL] != chp->ch_channel && 572 cf->cf_loc[ATACF_CHANNEL] != ATACF_CHANNEL_DEFAULT) 573 return (0); 574 575 return (1); 576 } 577 578 /* 579 * atabus_attach: 580 * 581 * Autoconfiguration attach routine. 582 */ 583 static void 584 atabus_attach(device_t parent, device_t self, void *aux) 585 { 586 struct atabus_softc *sc = device_private(self); 587 struct ata_channel *chp = aux; 588 struct atabus_initq *initq; 589 int error; 590 591 sc->sc_chan = chp; 592 593 aprint_normal("\n"); 594 aprint_naive("\n"); 595 596 sc->sc_dev = self; 597 598 if (ata_addref(chp)) 599 return; 600 601 RUN_ONCE(&ata_init_ctrl, atabus_init); 602 603 initq = kmem_zalloc(sizeof(*initq), KM_SLEEP); 604 initq->atabus_sc = sc; 605 mutex_enter(&atabus_qlock); 606 TAILQ_INSERT_TAIL(&atabus_initq_head, initq, atabus_initq); 607 mutex_exit(&atabus_qlock); 608 config_pending_incr(sc->sc_dev); 609 610 /* XXX MPSAFE - no KTHREAD_MPSAFE, so protected by KERNEL_LOCK() */ 611 if ((error = kthread_create(PRI_NONE, 0, NULL, atabus_thread, sc, 612 &chp->ch_thread, "%s", device_xname(self))) != 0) 613 aprint_error_dev(self, 614 "unable to create kernel thread: error %d\n", error); 615 616 if (!pmf_device_register(self, atabus_suspend, atabus_resume)) 617 aprint_error_dev(self, "couldn't establish power handler\n"); 618 } 619 620 /* 621 * atabus_detach: 622 * 623 * Autoconfiguration detach routine. 624 */ 625 static int 626 atabus_detach(device_t self, int flags) 627 { 628 struct atabus_softc *sc = device_private(self); 629 struct ata_channel *chp = sc->sc_chan; 630 device_t dev = NULL; 631 int i, error = 0; 632 633 /* Shutdown the channel. */ 634 ata_channel_lock(chp); 635 chp->ch_flags |= ATACH_SHUTDOWN; 636 while (chp->ch_thread != NULL) { 637 cv_signal(&chp->ch_thr_idle); 638 cv_wait(&chp->ch_thr_idle, &chp->ch_lock); 639 } 640 ata_channel_unlock(chp); 641 642 /* 643 * Detach atapibus and its children. 644 */ 645 if ((dev = chp->atapibus) != NULL) { 646 ATADEBUG_PRINT(("atabus_detach: %s: detaching %s\n", 647 device_xname(self), device_xname(dev)), DEBUG_DETACH); 648 649 error = config_detach(dev, flags); 650 if (error) 651 goto out; 652 KASSERT(chp->atapibus == NULL); 653 } 654 655 KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL); 656 657 /* 658 * Detach our other children. 659 */ 660 for (i = 0; i < chp->ch_ndrives; i++) { 661 if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATAPI) 662 continue; 663 if (chp->ch_drive[i].drive_type == ATA_DRIVET_PM) 664 chp->ch_drive[i].drive_type = ATA_DRIVET_NONE; 665 if ((dev = chp->ch_drive[i].drv_softc) != NULL) { 666 ATADEBUG_PRINT(("%s.%d: %s: detaching %s\n", __func__, 667 __LINE__, device_xname(self), device_xname(dev)), 668 DEBUG_DETACH); 669 error = config_detach(dev, flags); 670 if (error) 671 goto out; 672 KASSERT(chp->ch_drive[i].drv_softc == NULL); 673 KASSERT(chp->ch_drive[i].drive_type == 0); 674 } 675 } 676 atabus_free_drives(chp); 677 678 out: 679 #ifdef ATADEBUG 680 if (dev != NULL && error != 0) 681 ATADEBUG_PRINT(("%s: %s: error %d detaching %s\n", __func__, 682 device_xname(self), error, device_xname(dev)), 683 DEBUG_DETACH); 684 #endif /* ATADEBUG */ 685 686 return (error); 687 } 688 689 void 690 atabus_childdetached(device_t self, device_t child) 691 { 692 bool found = false; 693 struct atabus_softc *sc = device_private(self); 694 struct ata_channel *chp = sc->sc_chan; 695 int i; 696 697 KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL); 698 /* 699 * atapibus detached. 700 */ 701 if (child == chp->atapibus) { 702 chp->atapibus = NULL; 703 found = true; 704 for (i = 0; i < chp->ch_ndrives; i++) { 705 if (chp->ch_drive[i].drive_type != ATA_DRIVET_ATAPI) 706 continue; 707 KASSERT(chp->ch_drive[i].drv_softc != NULL); 708 chp->ch_drive[i].drv_softc = NULL; 709 chp->ch_drive[i].drive_flags = 0; 710 chp->ch_drive[i].drive_type = ATA_DRIVET_NONE; 711 } 712 } 713 714 /* 715 * Detach our other children. 716 */ 717 for (i = 0; i < chp->ch_ndrives; i++) { 718 if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATAPI) 719 continue; 720 if (child == chp->ch_drive[i].drv_softc) { 721 chp->ch_drive[i].drv_softc = NULL; 722 chp->ch_drive[i].drive_flags = 0; 723 if (chp->ch_drive[i].drive_type == ATA_DRIVET_PM) 724 chp->ch_satapmp_nports = 0; 725 chp->ch_drive[i].drive_type = ATA_DRIVET_NONE; 726 found = true; 727 } 728 } 729 730 if (!found) 731 panic("%s: unknown child %p", device_xname(self), 732 (const void *)child); 733 } 734 735 CFATTACH_DECL3_NEW(atabus, sizeof(struct atabus_softc), 736 atabus_match, atabus_attach, atabus_detach, NULL, atabus_rescan, 737 atabus_childdetached, DVF_DETACH_SHUTDOWN); 738 739 /***************************************************************************** 740 * Common ATA bus operations. 741 *****************************************************************************/ 742 743 /* allocate/free the channel's ch_drive[] array */ 744 int 745 atabus_alloc_drives(struct ata_channel *chp, int ndrives) 746 { 747 int i; 748 if (chp->ch_ndrives != ndrives) 749 atabus_free_drives(chp); 750 if (chp->ch_drive == NULL) { 751 chp->ch_drive = kmem_zalloc( 752 sizeof(struct ata_drive_datas) * ndrives, KM_NOSLEEP); 753 } 754 if (chp->ch_drive == NULL) { 755 aprint_error_dev(chp->ch_atac->atac_dev, 756 "can't alloc drive array\n"); 757 chp->ch_ndrives = 0; 758 return ENOMEM; 759 }; 760 for (i = 0; i < ndrives; i++) { 761 chp->ch_drive[i].chnl_softc = chp; 762 chp->ch_drive[i].drive = i; 763 } 764 chp->ch_ndrives = ndrives; 765 return 0; 766 } 767 768 void 769 atabus_free_drives(struct ata_channel *chp) 770 { 771 #ifdef DIAGNOSTIC 772 int i; 773 int dopanic = 0; 774 KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL); 775 for (i = 0; i < chp->ch_ndrives; i++) { 776 if (chp->ch_drive[i].drive_type != ATA_DRIVET_NONE) { 777 printf("%s: ch_drive[%d] type %d != ATA_DRIVET_NONE\n", 778 device_xname(chp->atabus), i, 779 chp->ch_drive[i].drive_type); 780 dopanic = 1; 781 } 782 if (chp->ch_drive[i].drv_softc != NULL) { 783 printf("%s: ch_drive[%d] attached to %s\n", 784 device_xname(chp->atabus), i, 785 device_xname(chp->ch_drive[i].drv_softc)); 786 dopanic = 1; 787 } 788 } 789 if (dopanic) 790 panic("atabus_free_drives"); 791 #endif 792 793 if (chp->ch_drive == NULL) 794 return; 795 kmem_free(chp->ch_drive, 796 sizeof(struct ata_drive_datas) * chp->ch_ndrives); 797 chp->ch_ndrives = 0; 798 chp->ch_drive = NULL; 799 } 800 801 /* Get the disk's parameters */ 802 int 803 ata_get_params(struct ata_drive_datas *drvp, uint8_t flags, 804 struct ataparams *prms) 805 { 806 struct ata_xfer *xfer; 807 struct ata_channel *chp = drvp->chnl_softc; 808 struct atac_softc *atac = chp->ch_atac; 809 char *tb; 810 int i, rv; 811 uint16_t *p; 812 813 ATADEBUG_PRINT(("%s\n", __func__), DEBUG_FUNCS); 814 815 xfer = ata_get_xfer(chp, false); 816 if (xfer == NULL) { 817 ATADEBUG_PRINT(("%s: no xfer\n", __func__), 818 DEBUG_FUNCS|DEBUG_PROBE); 819 return CMD_AGAIN; 820 } 821 822 tb = kmem_zalloc(ATA_BSIZE, KM_SLEEP); 823 memset(prms, 0, sizeof(struct ataparams)); 824 825 if (drvp->drive_type == ATA_DRIVET_ATA) { 826 xfer->c_ata_c.r_command = WDCC_IDENTIFY; 827 xfer->c_ata_c.r_st_bmask = WDCS_DRDY; 828 xfer->c_ata_c.r_st_pmask = WDCS_DRQ; 829 xfer->c_ata_c.timeout = 3000; /* 3s */ 830 } else if (drvp->drive_type == ATA_DRIVET_ATAPI) { 831 xfer->c_ata_c.r_command = ATAPI_IDENTIFY_DEVICE; 832 xfer->c_ata_c.r_st_bmask = 0; 833 xfer->c_ata_c.r_st_pmask = WDCS_DRQ; 834 xfer->c_ata_c.timeout = 10000; /* 10s */ 835 } else { 836 ATADEBUG_PRINT(("ata_get_parms: no disks\n"), 837 DEBUG_FUNCS|DEBUG_PROBE); 838 rv = CMD_ERR; 839 goto out; 840 } 841 xfer->c_ata_c.flags = AT_READ | flags; 842 xfer->c_ata_c.data = tb; 843 xfer->c_ata_c.bcount = ATA_BSIZE; 844 if ((*atac->atac_bustype_ata->ata_exec_command)(drvp, 845 xfer) != ATACMD_COMPLETE) { 846 ATADEBUG_PRINT(("ata_get_parms: wdc_exec_command failed\n"), 847 DEBUG_FUNCS|DEBUG_PROBE); 848 rv = CMD_AGAIN; 849 goto out; 850 } 851 if (xfer->c_ata_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) { 852 ATADEBUG_PRINT(("ata_get_parms: ata_c.flags=0x%x\n", 853 xfer->c_ata_c.flags), DEBUG_FUNCS|DEBUG_PROBE); 854 rv = CMD_ERR; 855 goto out; 856 } 857 /* if we didn't read any data something is wrong */ 858 if ((xfer->c_ata_c.flags & AT_XFDONE) == 0) { 859 rv = CMD_ERR; 860 goto out; 861 } 862 863 /* Read in parameter block. */ 864 memcpy(prms, tb, sizeof(struct ataparams)); 865 866 /* 867 * Shuffle string byte order. 868 * ATAPI NEC, Mitsumi and Pioneer drives and 869 * old ATA TDK CompactFlash cards 870 * have different byte order. 871 */ 872 #if BYTE_ORDER == BIG_ENDIAN 873 # define M(n) prms->atap_model[(n) ^ 1] 874 #else 875 # define M(n) prms->atap_model[n] 876 #endif 877 if ( 878 #if BYTE_ORDER == BIG_ENDIAN 879 ! 880 #endif 881 ((drvp->drive_type == ATA_DRIVET_ATAPI) ? 882 ((M(0) == 'N' && M(1) == 'E') || 883 (M(0) == 'F' && M(1) == 'X') || 884 (M(0) == 'P' && M(1) == 'i')) : 885 ((M(0) == 'T' && M(1) == 'D' && M(2) == 'K')))) { 886 rv = CMD_OK; 887 goto out; 888 } 889 #undef M 890 for (i = 0; i < sizeof(prms->atap_model); i += 2) { 891 p = (uint16_t *)(prms->atap_model + i); 892 *p = bswap16(*p); 893 } 894 for (i = 0; i < sizeof(prms->atap_serial); i += 2) { 895 p = (uint16_t *)(prms->atap_serial + i); 896 *p = bswap16(*p); 897 } 898 for (i = 0; i < sizeof(prms->atap_revision); i += 2) { 899 p = (uint16_t *)(prms->atap_revision + i); 900 *p = bswap16(*p); 901 } 902 903 rv = CMD_OK; 904 out: 905 kmem_free(tb, ATA_BSIZE); 906 ata_free_xfer(chp, xfer); 907 return rv; 908 } 909 910 int 911 ata_set_mode(struct ata_drive_datas *drvp, uint8_t mode, uint8_t flags) 912 { 913 struct ata_xfer *xfer; 914 int rv; 915 struct ata_channel *chp = drvp->chnl_softc; 916 struct atac_softc *atac = chp->ch_atac; 917 918 ATADEBUG_PRINT(("ata_set_mode=0x%x\n", mode), DEBUG_FUNCS); 919 920 xfer = ata_get_xfer(chp, false); 921 if (xfer == NULL) { 922 ATADEBUG_PRINT(("%s: no xfer\n", __func__), 923 DEBUG_FUNCS|DEBUG_PROBE); 924 return CMD_AGAIN; 925 } 926 927 xfer->c_ata_c.r_command = SET_FEATURES; 928 xfer->c_ata_c.r_st_bmask = 0; 929 xfer->c_ata_c.r_st_pmask = 0; 930 xfer->c_ata_c.r_features = WDSF_SET_MODE; 931 xfer->c_ata_c.r_count = mode; 932 xfer->c_ata_c.flags = flags; 933 xfer->c_ata_c.timeout = 1000; /* 1s */ 934 if ((*atac->atac_bustype_ata->ata_exec_command)(drvp, 935 xfer) != ATACMD_COMPLETE) { 936 rv = CMD_AGAIN; 937 goto out; 938 } 939 if (xfer->c_ata_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) { 940 rv = CMD_ERR; 941 goto out; 942 } 943 944 rv = CMD_OK; 945 946 out: 947 ata_free_xfer(chp, xfer); 948 return rv; 949 } 950 951 #if NATA_DMA 952 void 953 ata_dmaerr(struct ata_drive_datas *drvp, int flags) 954 { 955 /* 956 * Downgrade decision: if we get NERRS_MAX in NXFER. 957 * We start with n_dmaerrs set to NERRS_MAX-1 so that the 958 * first error within the first NXFER ops will immediatly trigger 959 * a downgrade. 960 * If we got an error and n_xfers is bigger than NXFER reset counters. 961 */ 962 drvp->n_dmaerrs++; 963 if (drvp->n_dmaerrs >= NERRS_MAX && drvp->n_xfers <= NXFER) { 964 ata_downgrade_mode(drvp, flags); 965 drvp->n_dmaerrs = NERRS_MAX-1; 966 drvp->n_xfers = 0; 967 return; 968 } 969 if (drvp->n_xfers > NXFER) { 970 drvp->n_dmaerrs = 1; /* just got an error */ 971 drvp->n_xfers = 1; /* restart counting from this error */ 972 } 973 } 974 #endif /* NATA_DMA */ 975 976 /* 977 * freeze the queue and wait for the controller to be idle. Caller has to 978 * unfreeze/restart the queue 979 */ 980 static void 981 ata_channel_idle(struct ata_channel *chp) 982 { 983 ata_channel_lock(chp); 984 ata_channel_freeze_locked(chp); 985 while (chp->ch_queue->queue_active > 0) { 986 chp->ch_queue->queue_flags |= QF_IDLE_WAIT; 987 cv_timedwait(&chp->ch_queue->queue_idle, &chp->ch_lock, 1); 988 } 989 ata_channel_unlock(chp); 990 } 991 992 /* 993 * Add a command to the queue and start controller. 994 * 995 * MUST BE CALLED AT splbio()! 996 */ 997 void 998 ata_exec_xfer(struct ata_channel *chp, struct ata_xfer *xfer) 999 { 1000 1001 ATADEBUG_PRINT(("ata_exec_xfer %p channel %d drive %d\n", xfer, 1002 chp->ch_channel, xfer->c_drive), DEBUG_XFERS); 1003 1004 /* complete xfer setup */ 1005 xfer->c_chp = chp; 1006 1007 ata_channel_lock(chp); 1008 1009 /* 1010 * Standard commands are added to the end of command list, but 1011 * recovery commands must be run immediatelly. 1012 */ 1013 if ((xfer->c_flags & C_SKIP_QUEUE) == 0) 1014 SIMPLEQ_INSERT_TAIL(&chp->ch_queue->queue_xfer, xfer, 1015 c_xferchain); 1016 else 1017 SIMPLEQ_INSERT_HEAD(&chp->ch_queue->queue_xfer, xfer, 1018 c_xferchain); 1019 1020 /* 1021 * if polling and can sleep, wait for the xfer to be at head of queue 1022 */ 1023 if ((xfer->c_flags & (C_POLL | C_WAIT)) == (C_POLL | C_WAIT)) { 1024 while (chp->ch_queue->queue_active > 0 || 1025 SIMPLEQ_FIRST(&chp->ch_queue->queue_xfer) != xfer) { 1026 xfer->c_flags |= C_WAITACT; 1027 cv_wait(&chp->ch_queue->c_active, &chp->ch_lock); 1028 xfer->c_flags &= ~C_WAITACT; 1029 } 1030 1031 /* 1032 * Free xfer now if it there was attempt to free it 1033 * while we were waiting. 1034 */ 1035 if ((xfer->c_flags & (C_FREE|C_WAITTIMO)) == C_FREE) { 1036 ata_channel_unlock(chp); 1037 1038 ata_free_xfer(chp, xfer); 1039 return; 1040 } 1041 } 1042 1043 ata_channel_unlock(chp); 1044 1045 ATADEBUG_PRINT(("atastart from ata_exec_xfer, flags 0x%x\n", 1046 chp->ch_flags), DEBUG_XFERS); 1047 atastart(chp); 1048 } 1049 1050 /* 1051 * Start I/O on a controller, for the given channel. 1052 * The first xfer may be not for our channel if the channel queues 1053 * are shared. 1054 * 1055 * MUST BE CALLED AT splbio()! 1056 * 1057 * XXX FIS-based switching with PMP 1058 * Currently atastart() never schedules concurrent NCQ transfers to more than 1059 * one drive, even when channel has several SATA drives attached via PMP. 1060 * To support concurrent transfers to different drives with PMP, it would be 1061 * necessary to implement FIS-based switching support in controller driver, 1062 * and then adjust error handling and recovery to stop assuming at most 1063 * one active drive. 1064 */ 1065 void 1066 atastart(struct ata_channel *chp) 1067 { 1068 struct atac_softc *atac = chp->ch_atac; 1069 struct ata_queue *chq = chp->ch_queue; 1070 struct ata_xfer *xfer, *axfer; 1071 bool skipq; 1072 1073 #ifdef ATA_DEBUG 1074 int spl1, spl2; 1075 1076 spl1 = splbio(); 1077 spl2 = splbio(); 1078 if (spl2 != spl1) { 1079 printf("atastart: not at splbio()\n"); 1080 panic("atastart"); 1081 } 1082 splx(spl2); 1083 splx(spl1); 1084 #endif /* ATA_DEBUG */ 1085 1086 ata_channel_lock(chp); 1087 1088 again: 1089 /* is there a xfer ? */ 1090 if ((xfer = SIMPLEQ_FIRST(&chp->ch_queue->queue_xfer)) == NULL) { 1091 ATADEBUG_PRINT(("%s(chp=%p): channel %d queue_xfer is empty\n", 1092 __func__, chp, chp->ch_channel), DEBUG_XFERS); 1093 goto out; 1094 } 1095 1096 /* 1097 * if someone is waiting for the command to be active, wake it up 1098 * and let it process the command 1099 */ 1100 if (__predict_false(xfer->c_flags & C_WAITACT)) { 1101 ATADEBUG_PRINT(("atastart: xfer %p channel %d drive %d " 1102 "wait active\n", xfer, chp->ch_channel, xfer->c_drive), 1103 DEBUG_XFERS); 1104 cv_broadcast(&chp->ch_queue->c_active); 1105 goto out; 1106 } 1107 1108 skipq = ISSET(xfer->c_flags, C_SKIP_QUEUE); 1109 1110 /* is the queue frozen? */ 1111 if (__predict_false(!skipq && chq->queue_freeze > 0)) { 1112 if (chq->queue_flags & QF_IDLE_WAIT) { 1113 chq->queue_flags &= ~QF_IDLE_WAIT; 1114 cv_signal(&chp->ch_queue->queue_idle); 1115 } 1116 ATADEBUG_PRINT(("%s(chp=%p): channel %d drive %d " 1117 "queue frozen: %d\n", 1118 __func__, chp, chp->ch_channel, xfer->c_drive, 1119 chq->queue_freeze), 1120 DEBUG_XFERS); 1121 goto out; 1122 } 1123 1124 /* all xfers on same queue must belong to the same channel */ 1125 KASSERT(xfer->c_chp == chp); 1126 1127 /* 1128 * Can only take the command if there are no current active 1129 * commands, or if the command is NCQ and the active commands are also 1130 * NCQ. If PM is in use and HBA driver doesn't support/use FIS-based 1131 * switching, can only send commands to single drive. 1132 * Need only check first xfer. 1133 * XXX FIS-based switching - revisit 1134 */ 1135 if (!skipq && (axfer = TAILQ_FIRST(&chp->ch_queue->active_xfers))) { 1136 if (!ISSET(xfer->c_flags, C_NCQ) || 1137 !ISSET(axfer->c_flags, C_NCQ) || 1138 xfer->c_drive != axfer->c_drive) 1139 goto out; 1140 } 1141 1142 struct ata_drive_datas * const drvp = &chp->ch_drive[xfer->c_drive]; 1143 1144 /* 1145 * Are we on limit of active xfers ? If the queue has more 1146 * than 1 openings, we keep one slot reserved for recovery or dump. 1147 */ 1148 KASSERT(chq->queue_active <= chq->queue_openings); 1149 const uint8_t chq_openings = (!skipq && chq->queue_openings > 1) 1150 ? (chq->queue_openings - 1) : chq->queue_openings; 1151 const uint8_t drv_openings = ISSET(xfer->c_flags, C_NCQ) 1152 ? drvp->drv_openings : ATA_MAX_OPENINGS; 1153 if (chq->queue_active >= MIN(chq_openings, drv_openings)) { 1154 if (skipq) { 1155 panic("%s: channel %d busy, xfer not possible", 1156 __func__, chp->ch_channel); 1157 } 1158 1159 ATADEBUG_PRINT(("%s(chp=%p): channel %d completely busy\n", 1160 __func__, chp, chp->ch_channel), DEBUG_XFERS); 1161 goto out; 1162 } 1163 1164 /* Slot allocation can fail if drv_openings < ch_openings */ 1165 if (!ata_queue_alloc_slot(chp, &xfer->c_slot, drv_openings)) 1166 goto out; 1167 1168 if (__predict_false(atac->atac_claim_hw)) { 1169 if (!atac->atac_claim_hw(chp, 0)) { 1170 ata_queue_free_slot(chp, xfer->c_slot); 1171 goto out; 1172 } 1173 } 1174 1175 /* Now committed to start the xfer */ 1176 1177 ATADEBUG_PRINT(("%s(chp=%p): xfer %p channel %d drive %d\n", 1178 __func__, chp, xfer, chp->ch_channel, xfer->c_drive), DEBUG_XFERS); 1179 if (drvp->drive_flags & ATA_DRIVE_RESET) { 1180 drvp->drive_flags &= ~ATA_DRIVE_RESET; 1181 drvp->state = 0; 1182 } 1183 1184 if (ISSET(xfer->c_flags, C_NCQ)) 1185 SET(chp->ch_flags, ATACH_NCQ); 1186 else 1187 CLR(chp->ch_flags, ATACH_NCQ); 1188 1189 SIMPLEQ_REMOVE_HEAD(&chq->queue_xfer, c_xferchain); 1190 1191 ata_activate_xfer_locked(chp, xfer); 1192 1193 if (atac->atac_cap & ATAC_CAP_NOIRQ) 1194 KASSERT(xfer->c_flags & C_POLL); 1195 1196 switch (ata_xfer_start(xfer)) { 1197 case ATASTART_TH: 1198 case ATASTART_ABORT: 1199 /* don't start any further commands in this case */ 1200 goto out; 1201 default: 1202 /* nothing to do */ 1203 break; 1204 } 1205 1206 /* Queue more commands if possible, but not during recovery or dump */ 1207 if (!skipq && chq->queue_active < chq->queue_openings) 1208 goto again; 1209 1210 out: 1211 ata_channel_unlock(chp); 1212 } 1213 1214 int 1215 ata_xfer_start(struct ata_xfer *xfer) 1216 { 1217 struct ata_channel *chp = xfer->c_chp; 1218 int rv; 1219 1220 KASSERT(mutex_owned(&chp->ch_lock)); 1221 1222 rv = xfer->ops->c_start(chp, xfer); 1223 switch (rv) { 1224 case ATASTART_STARTED: 1225 /* nothing to do */ 1226 break; 1227 case ATASTART_TH: 1228 /* postpone xfer to thread */ 1229 ata_thread_wake_locked(chp); 1230 break; 1231 case ATASTART_POLL: 1232 /* can happen even in thread context for some ATAPI devices */ 1233 ata_channel_unlock(chp); 1234 KASSERT(xfer->ops != NULL && xfer->ops->c_poll != NULL); 1235 xfer->ops->c_poll(chp, xfer); 1236 ata_channel_lock(chp); 1237 break; 1238 case ATASTART_ABORT: 1239 ata_channel_unlock(chp); 1240 KASSERT(xfer->ops != NULL && xfer->ops->c_abort != NULL); 1241 xfer->ops->c_abort(chp, xfer); 1242 ata_channel_lock(chp); 1243 break; 1244 } 1245 1246 return rv; 1247 } 1248 1249 static void 1250 ata_activate_xfer_locked(struct ata_channel *chp, struct ata_xfer *xfer) 1251 { 1252 struct ata_queue * const chq = chp->ch_queue; 1253 1254 KASSERT(mutex_owned(&chp->ch_lock)); 1255 KASSERT((chq->active_xfers_used & __BIT(xfer->c_slot)) == 0); 1256 1257 if ((xfer->c_flags & C_SKIP_QUEUE) == 0) 1258 TAILQ_INSERT_TAIL(&chq->active_xfers, xfer, c_activechain); 1259 else { 1260 /* 1261 * Must go to head, so that ata_queue_get_active_xfer() 1262 * returns the recovery command, and not some other 1263 * random active transfer. 1264 */ 1265 TAILQ_INSERT_HEAD(&chq->active_xfers, xfer, c_activechain); 1266 } 1267 chq->active_xfers_used |= __BIT(xfer->c_slot); 1268 chq->queue_active++; 1269 } 1270 1271 /* 1272 * Does it's own locking, does not require splbio(). 1273 * flags - whether to block waiting for free xfer 1274 */ 1275 struct ata_xfer * 1276 ata_get_xfer(struct ata_channel *chp, bool waitok) 1277 { 1278 struct ata_xfer *xfer; 1279 1280 xfer = pool_get(&ata_xfer_pool, waitok ? PR_WAITOK : PR_NOWAIT); 1281 KASSERT(!waitok || xfer != NULL); 1282 1283 if (xfer != NULL) { 1284 /* zero everything */ 1285 memset(xfer, 0, sizeof(*xfer)); 1286 } 1287 1288 return xfer; 1289 } 1290 1291 /* 1292 * ata_deactivate_xfer() must be always called prior to ata_free_xfer() 1293 */ 1294 void 1295 ata_free_xfer(struct ata_channel *chp, struct ata_xfer *xfer) 1296 { 1297 struct ata_queue *chq = chp->ch_queue; 1298 1299 ata_channel_lock(chp); 1300 1301 if (__predict_false(xfer->c_flags & (C_WAITACT|C_WAITTIMO))) { 1302 /* Someone is waiting for this xfer, so we can't free now */ 1303 xfer->c_flags |= C_FREE; 1304 cv_broadcast(&chq->c_active); 1305 ata_channel_unlock(chp); 1306 return; 1307 } 1308 1309 /* XXX move PIOBM and free_gw to deactivate? */ 1310 #if NATA_PIOBM /* XXX wdc dependent code */ 1311 if (__predict_false(xfer->c_flags & C_PIOBM)) { 1312 struct wdc_softc *wdc = CHAN_TO_WDC(chp); 1313 1314 /* finish the busmastering PIO */ 1315 (*wdc->piobm_done)(wdc->dma_arg, 1316 chp->ch_channel, xfer->c_drive); 1317 chp->ch_flags &= ~(ATACH_DMA_WAIT | ATACH_PIOBM_WAIT | ATACH_IRQ_WAIT); 1318 } 1319 #endif 1320 1321 if (__predict_false(chp->ch_atac->atac_free_hw)) 1322 chp->ch_atac->atac_free_hw(chp); 1323 1324 ata_channel_unlock(chp); 1325 1326 if (__predict_true(!ISSET(xfer->c_flags, C_PRIVATE_ALLOC))) 1327 pool_put(&ata_xfer_pool, xfer); 1328 } 1329 1330 void 1331 ata_deactivate_xfer(struct ata_channel *chp, struct ata_xfer *xfer) 1332 { 1333 struct ata_queue * const chq = chp->ch_queue; 1334 1335 ata_channel_lock(chp); 1336 1337 KASSERT(chq->queue_active > 0); 1338 KASSERT((chq->active_xfers_used & __BIT(xfer->c_slot)) != 0); 1339 1340 /* Stop only when this is last active xfer */ 1341 if (chq->queue_active == 1) 1342 callout_stop(&chp->c_timo_callout); 1343 1344 if (callout_invoking(&chp->c_timo_callout)) 1345 xfer->c_flags |= C_WAITTIMO; 1346 1347 TAILQ_REMOVE(&chq->active_xfers, xfer, c_activechain); 1348 chq->active_xfers_used &= ~__BIT(xfer->c_slot); 1349 chq->queue_active--; 1350 1351 ata_queue_free_slot(chp, xfer->c_slot); 1352 1353 if (xfer->c_flags & C_WAIT) 1354 cv_broadcast(&chq->c_cmd_finish); 1355 1356 ata_channel_unlock(chp); 1357 } 1358 1359 /* 1360 * Called in c_intr hook. Must be called before before any deactivations 1361 * are done - if there is drain pending, it calls c_kill_xfer hook which 1362 * deactivates the xfer. 1363 * Calls c_kill_xfer with channel lock free. 1364 * Returns true if caller should just exit without further processing. 1365 * Caller must not further access any part of xfer or any related controller 1366 * structures in that case, it should just return. 1367 */ 1368 bool 1369 ata_waitdrain_xfer_check(struct ata_channel *chp, struct ata_xfer *xfer) 1370 { 1371 int drive = xfer->c_drive; 1372 bool draining = false; 1373 1374 ata_channel_lock(chp); 1375 1376 if (chp->ch_drive[drive].drive_flags & ATA_DRIVE_WAITDRAIN) { 1377 ata_channel_unlock(chp); 1378 1379 xfer->ops->c_kill_xfer(chp, xfer, KILL_GONE); 1380 1381 ata_channel_lock(chp); 1382 chp->ch_drive[drive].drive_flags &= ~ATA_DRIVE_WAITDRAIN; 1383 cv_signal(&chp->ch_queue->queue_drain); 1384 draining = true; 1385 } 1386 1387 ata_channel_unlock(chp); 1388 1389 return draining; 1390 } 1391 1392 /* 1393 * Check for race of normal transfer handling vs. timeout. 1394 */ 1395 bool 1396 ata_timo_xfer_check(struct ata_xfer *xfer) 1397 { 1398 struct ata_channel *chp = xfer->c_chp; 1399 struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive]; 1400 1401 ata_channel_lock(chp); 1402 1403 if (xfer->c_flags & C_WAITTIMO) { 1404 xfer->c_flags &= ~C_WAITTIMO; 1405 1406 /* Handle race vs. ata_free_xfer() */ 1407 if (xfer->c_flags & C_FREE) { 1408 xfer->c_flags &= ~C_FREE; 1409 ata_channel_unlock(chp); 1410 1411 device_printf(drvp->drv_softc, 1412 "xfer %"PRIxPTR" freed while invoking timeout\n", 1413 (intptr_t)xfer & PAGE_MASK); 1414 1415 ata_free_xfer(chp, xfer); 1416 return true; 1417 } 1418 1419 /* Race vs. callout_stop() in ata_deactivate_xfer() */ 1420 ata_channel_unlock(chp); 1421 1422 device_printf(drvp->drv_softc, 1423 "xfer %"PRIxPTR" deactivated while invoking timeout\n", 1424 (intptr_t)xfer & PAGE_MASK); 1425 return true; 1426 } 1427 1428 ata_channel_unlock(chp); 1429 1430 /* No race, proceed with timeout handling */ 1431 return false; 1432 } 1433 1434 /* 1435 * Kill off all active xfers for a ata_channel. 1436 * 1437 * Must be called with channel lock held. 1438 */ 1439 void 1440 ata_kill_active(struct ata_channel *chp, int reason, int flags) 1441 { 1442 struct ata_queue * const chq = chp->ch_queue; 1443 struct ata_xfer *xfer, *xfernext; 1444 1445 KASSERT(mutex_owned(&chp->ch_lock)); 1446 1447 TAILQ_FOREACH_SAFE(xfer, &chq->active_xfers, c_activechain, xfernext) { 1448 ata_channel_unlock(chp); 1449 xfer->ops->c_kill_xfer(xfer->c_chp, xfer, reason); 1450 ata_channel_lock(chp); 1451 } 1452 } 1453 1454 /* 1455 * Kill off all pending xfers for a drive. 1456 */ 1457 void 1458 ata_kill_pending(struct ata_drive_datas *drvp) 1459 { 1460 struct ata_channel * const chp = drvp->chnl_softc; 1461 struct ata_queue * const chq = chp->ch_queue; 1462 struct ata_xfer *xfer; 1463 1464 ata_channel_lock(chp); 1465 1466 /* Kill all pending transfers */ 1467 while ((xfer = SIMPLEQ_FIRST(&chq->queue_xfer))) { 1468 KASSERT(xfer->c_chp == chp); 1469 1470 if (xfer->c_drive != drvp->drive) 1471 continue; 1472 1473 SIMPLEQ_REMOVE_HEAD(&chp->ch_queue->queue_xfer, c_xferchain); 1474 1475 /* 1476 * Keep the lock, so that we get deadlock (and 'locking against 1477 * myself' with LOCKDEBUG), instead of silent 1478 * data corruption, if the hook tries to call back into 1479 * middle layer for inactive xfer. 1480 */ 1481 xfer->ops->c_kill_xfer(chp, xfer, KILL_GONE_INACTIVE); 1482 } 1483 1484 /* Wait until all active transfers on the drive finish */ 1485 while (chq->queue_active > 0) { 1486 bool drv_active = false; 1487 1488 TAILQ_FOREACH(xfer, &chq->active_xfers, c_activechain) { 1489 KASSERT(xfer->c_chp == chp); 1490 1491 if (xfer->c_drive == drvp->drive) { 1492 drv_active = true; 1493 break; 1494 } 1495 } 1496 1497 if (!drv_active) { 1498 /* all finished */ 1499 break; 1500 } 1501 1502 drvp->drive_flags |= ATA_DRIVE_WAITDRAIN; 1503 cv_wait(&chq->queue_drain, &chp->ch_lock); 1504 } 1505 1506 ata_channel_unlock(chp); 1507 } 1508 1509 static void 1510 ata_channel_freeze_locked(struct ata_channel *chp) 1511 { 1512 chp->ch_queue->queue_freeze++; 1513 1514 ATADEBUG_PRINT(("%s(chp=%p) -> %d\n", __func__, chp, 1515 chp->ch_queue->queue_freeze), DEBUG_FUNCS | DEBUG_XFERS); 1516 } 1517 1518 void 1519 ata_channel_freeze(struct ata_channel *chp) 1520 { 1521 ata_channel_lock(chp); 1522 ata_channel_freeze_locked(chp); 1523 ata_channel_unlock(chp); 1524 } 1525 1526 void 1527 ata_channel_thaw_locked(struct ata_channel *chp) 1528 { 1529 KASSERT(mutex_owned(&chp->ch_lock)); 1530 KASSERT(chp->ch_queue->queue_freeze > 0); 1531 1532 chp->ch_queue->queue_freeze--; 1533 1534 ATADEBUG_PRINT(("%s(chp=%p) -> %d\n", __func__, chp, 1535 chp->ch_queue->queue_freeze), DEBUG_FUNCS | DEBUG_XFERS); 1536 } 1537 1538 /* 1539 * ata_thread_run: 1540 * 1541 * Reset and ATA channel. Channel lock must be held. arg is type-specific. 1542 */ 1543 void 1544 ata_thread_run(struct ata_channel *chp, int flags, int type, int arg) 1545 { 1546 struct atac_softc *atac = chp->ch_atac; 1547 bool threset = false; 1548 struct ata_drive_datas *drvp; 1549 1550 ata_channel_lock_owned(chp); 1551 1552 /* 1553 * If we can poll or wait it's OK, otherwise wake up the 1554 * kernel thread to do it for us. 1555 */ 1556 ATADEBUG_PRINT(("%s flags 0x%x ch_flags 0x%x\n", 1557 __func__, flags, chp->ch_flags), DEBUG_FUNCS | DEBUG_XFERS); 1558 if ((flags & (AT_POLL | AT_WAIT)) == 0) { 1559 switch (type) { 1560 case ATACH_TH_RESET: 1561 if (chp->ch_flags & ATACH_TH_RESET) { 1562 /* No need to schedule another reset */ 1563 return; 1564 } 1565 break; 1566 case ATACH_TH_DRIVE_RESET: 1567 { 1568 int drive = arg; 1569 1570 KASSERT(drive <= chp->ch_ndrives); 1571 drvp = &chp->ch_drive[drive]; 1572 1573 if (drvp->drive_flags & ATA_DRIVE_TH_RESET) { 1574 /* No need to schedule another reset */ 1575 return; 1576 } 1577 drvp->drive_flags |= ATA_DRIVE_TH_RESET; 1578 break; 1579 } 1580 case ATACH_TH_RECOVERY: 1581 { 1582 uint32_t tfd = (uint32_t)arg; 1583 1584 KASSERT((chp->ch_flags & ATACH_RECOVERING) == 0); 1585 chp->recovery_tfd = tfd; 1586 break; 1587 } 1588 default: 1589 panic("%s: unknown type: %x", __func__, type); 1590 /* NOTREACHED */ 1591 } 1592 1593 /* 1594 * Block execution of other commands while reset is scheduled 1595 * to a thread. 1596 */ 1597 ata_channel_freeze_locked(chp); 1598 chp->ch_flags |= type; 1599 1600 cv_signal(&chp->ch_thr_idle); 1601 return; 1602 } 1603 1604 /* Block execution of other commands during reset */ 1605 ata_channel_freeze_locked(chp); 1606 1607 /* 1608 * If reset has been scheduled to a thread, then clear 1609 * the flag now so that the thread won't try to execute it if 1610 * we happen to sleep, and thaw one more time after the reset. 1611 */ 1612 if (chp->ch_flags & type) { 1613 chp->ch_flags &= ~type; 1614 threset = true; 1615 } 1616 1617 switch (type) { 1618 case ATACH_TH_RESET: 1619 (*atac->atac_bustype_ata->ata_reset_channel)(chp, flags); 1620 1621 KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL); 1622 for (int drive = 0; drive < chp->ch_ndrives; drive++) 1623 chp->ch_drive[drive].state = 0; 1624 break; 1625 1626 case ATACH_TH_DRIVE_RESET: 1627 { 1628 int drive = arg; 1629 1630 KASSERT(drive <= chp->ch_ndrives); 1631 drvp = &chp->ch_drive[drive]; 1632 (*atac->atac_bustype_ata->ata_reset_drive)(drvp, flags, NULL); 1633 drvp->state = 0; 1634 break; 1635 } 1636 1637 case ATACH_TH_RECOVERY: 1638 { 1639 uint32_t tfd = (uint32_t)arg; 1640 1641 KASSERT((chp->ch_flags & ATACH_RECOVERING) == 0); 1642 KASSERT(atac->atac_bustype_ata->ata_recovery != NULL); 1643 1644 SET(chp->ch_flags, ATACH_RECOVERING); 1645 (*atac->atac_bustype_ata->ata_recovery)(chp, flags, tfd); 1646 CLR(chp->ch_flags, ATACH_RECOVERING); 1647 break; 1648 } 1649 1650 default: 1651 panic("%s: unknown type: %x", __func__, type); 1652 /* NOTREACHED */ 1653 } 1654 1655 /* 1656 * Thaw one extra time to clear the freeze done when the reset has 1657 * been scheduled to the thread. 1658 */ 1659 if (threset) 1660 ata_channel_thaw_locked(chp); 1661 1662 /* Allow commands to run again */ 1663 ata_channel_thaw_locked(chp); 1664 1665 /* Signal the thread in case there is an xfer to run */ 1666 cv_signal(&chp->ch_thr_idle); 1667 } 1668 1669 int 1670 ata_addref(struct ata_channel *chp) 1671 { 1672 struct atac_softc *atac = chp->ch_atac; 1673 struct scsipi_adapter *adapt = &atac->atac_atapi_adapter._generic; 1674 int s, error = 0; 1675 1676 s = splbio(); 1677 if (adapt->adapt_refcnt++ == 0 && 1678 adapt->adapt_enable != NULL) { 1679 error = (*adapt->adapt_enable)(atac->atac_dev, 1); 1680 if (error) 1681 adapt->adapt_refcnt--; 1682 } 1683 splx(s); 1684 return (error); 1685 } 1686 1687 void 1688 ata_delref(struct ata_channel *chp) 1689 { 1690 struct atac_softc *atac = chp->ch_atac; 1691 struct scsipi_adapter *adapt = &atac->atac_atapi_adapter._generic; 1692 int s; 1693 1694 s = splbio(); 1695 if (adapt->adapt_refcnt-- == 1 && 1696 adapt->adapt_enable != NULL) 1697 (void) (*adapt->adapt_enable)(atac->atac_dev, 0); 1698 splx(s); 1699 } 1700 1701 void 1702 ata_print_modes(struct ata_channel *chp) 1703 { 1704 struct atac_softc *atac = chp->ch_atac; 1705 int drive; 1706 struct ata_drive_datas *drvp; 1707 1708 KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL); 1709 for (drive = 0; drive < chp->ch_ndrives; drive++) { 1710 drvp = &chp->ch_drive[drive]; 1711 if (drvp->drive_type == ATA_DRIVET_NONE || 1712 drvp->drv_softc == NULL) 1713 continue; 1714 aprint_verbose("%s(%s:%d:%d): using PIO mode %d", 1715 device_xname(drvp->drv_softc), 1716 device_xname(atac->atac_dev), 1717 chp->ch_channel, drvp->drive, drvp->PIO_mode); 1718 #if NATA_DMA 1719 if (drvp->drive_flags & ATA_DRIVE_DMA) 1720 aprint_verbose(", DMA mode %d", drvp->DMA_mode); 1721 #if NATA_UDMA 1722 if (drvp->drive_flags & ATA_DRIVE_UDMA) { 1723 aprint_verbose(", Ultra-DMA mode %d", drvp->UDMA_mode); 1724 if (drvp->UDMA_mode == 2) 1725 aprint_verbose(" (Ultra/33)"); 1726 else if (drvp->UDMA_mode == 4) 1727 aprint_verbose(" (Ultra/66)"); 1728 else if (drvp->UDMA_mode == 5) 1729 aprint_verbose(" (Ultra/100)"); 1730 else if (drvp->UDMA_mode == 6) 1731 aprint_verbose(" (Ultra/133)"); 1732 } 1733 #endif /* NATA_UDMA */ 1734 #endif /* NATA_DMA */ 1735 #if NATA_DMA || NATA_PIOBM 1736 if (0 1737 #if NATA_DMA 1738 || (drvp->drive_flags & (ATA_DRIVE_DMA | ATA_DRIVE_UDMA)) 1739 #endif 1740 #if NATA_PIOBM 1741 /* PIOBM capable controllers use DMA for PIO commands */ 1742 || (atac->atac_cap & ATAC_CAP_PIOBM) 1743 #endif 1744 ) 1745 aprint_verbose(" (using DMA)"); 1746 1747 if (drvp->drive_flags & ATA_DRIVE_NCQ) { 1748 aprint_verbose(", NCQ (%d tags)%s", 1749 ATA_REAL_OPENINGS(chp->ch_queue->queue_openings), 1750 (drvp->drive_flags & ATA_DRIVE_NCQ_PRIO) 1751 ? " w/PRIO" : ""); 1752 } else if (drvp->drive_flags & ATA_DRIVE_WFUA) 1753 aprint_verbose(", WRITE DMA FUA EXT"); 1754 1755 #endif /* NATA_DMA || NATA_PIOBM */ 1756 aprint_verbose("\n"); 1757 } 1758 } 1759 1760 #if NATA_DMA 1761 /* 1762 * downgrade the transfer mode of a drive after an error. return 1 if 1763 * downgrade was possible, 0 otherwise. 1764 * 1765 * MUST BE CALLED AT splbio()! 1766 */ 1767 int 1768 ata_downgrade_mode(struct ata_drive_datas *drvp, int flags) 1769 { 1770 struct ata_channel *chp = drvp->chnl_softc; 1771 struct atac_softc *atac = chp->ch_atac; 1772 device_t drv_dev = drvp->drv_softc; 1773 int cf_flags = device_cfdata(drv_dev)->cf_flags; 1774 1775 /* if drive or controller don't know its mode, we can't do much */ 1776 if ((drvp->drive_flags & ATA_DRIVE_MODE) == 0 || 1777 (atac->atac_set_modes == NULL)) 1778 return 0; 1779 /* current drive mode was set by a config flag, let it this way */ 1780 if ((cf_flags & ATA_CONFIG_PIO_SET) || 1781 (cf_flags & ATA_CONFIG_DMA_SET) || 1782 (cf_flags & ATA_CONFIG_UDMA_SET)) 1783 return 0; 1784 1785 #if NATA_UDMA 1786 /* 1787 * If we were using Ultra-DMA mode, downgrade to the next lower mode. 1788 */ 1789 if ((drvp->drive_flags & ATA_DRIVE_UDMA) && drvp->UDMA_mode >= 2) { 1790 drvp->UDMA_mode--; 1791 aprint_error_dev(drv_dev, 1792 "transfer error, downgrading to Ultra-DMA mode %d\n", 1793 drvp->UDMA_mode); 1794 } 1795 #endif 1796 1797 /* 1798 * If we were using ultra-DMA, don't downgrade to multiword DMA. 1799 */ 1800 else if (drvp->drive_flags & (ATA_DRIVE_DMA | ATA_DRIVE_UDMA)) { 1801 drvp->drive_flags &= ~(ATA_DRIVE_DMA | ATA_DRIVE_UDMA); 1802 drvp->PIO_mode = drvp->PIO_cap; 1803 aprint_error_dev(drv_dev, 1804 "transfer error, downgrading to PIO mode %d\n", 1805 drvp->PIO_mode); 1806 } else /* already using PIO, can't downgrade */ 1807 return 0; 1808 1809 (*atac->atac_set_modes)(chp); 1810 ata_print_modes(chp); 1811 /* reset the channel, which will schedule all drives for setup */ 1812 ata_thread_run(chp, flags, ATACH_TH_RESET, ATACH_NODRIVE); 1813 return 1; 1814 } 1815 #endif /* NATA_DMA */ 1816 1817 /* 1818 * Probe drive's capabilities, for use by the controller later 1819 * Assumes drvp points to an existing drive. 1820 */ 1821 void 1822 ata_probe_caps(struct ata_drive_datas *drvp) 1823 { 1824 struct ataparams params, params2; 1825 struct ata_channel *chp = drvp->chnl_softc; 1826 struct atac_softc *atac = chp->ch_atac; 1827 device_t drv_dev = drvp->drv_softc; 1828 int i, printed = 0; 1829 const char *sep = ""; 1830 int cf_flags; 1831 1832 if (ata_get_params(drvp, AT_WAIT, ¶ms) != CMD_OK) { 1833 /* IDENTIFY failed. Can't tell more about the device */ 1834 return; 1835 } 1836 if ((atac->atac_cap & (ATAC_CAP_DATA16 | ATAC_CAP_DATA32)) == 1837 (ATAC_CAP_DATA16 | ATAC_CAP_DATA32)) { 1838 /* 1839 * Controller claims 16 and 32 bit transfers. 1840 * Re-do an IDENTIFY with 32-bit transfers, 1841 * and compare results. 1842 */ 1843 ata_channel_lock(chp); 1844 drvp->drive_flags |= ATA_DRIVE_CAP32; 1845 ata_channel_unlock(chp); 1846 ata_get_params(drvp, AT_WAIT, ¶ms2); 1847 if (memcmp(¶ms, ¶ms2, sizeof(struct ataparams)) != 0) { 1848 /* Not good. fall back to 16bits */ 1849 ata_channel_lock(chp); 1850 drvp->drive_flags &= ~ATA_DRIVE_CAP32; 1851 ata_channel_unlock(chp); 1852 } else { 1853 aprint_verbose_dev(drv_dev, "32-bit data port\n"); 1854 } 1855 } 1856 #if 0 /* Some ultra-DMA drives claims to only support ATA-3. sigh */ 1857 if (params.atap_ata_major > 0x01 && 1858 params.atap_ata_major != 0xffff) { 1859 for (i = 14; i > 0; i--) { 1860 if (params.atap_ata_major & (1 << i)) { 1861 aprint_verbose_dev(drv_dev, 1862 "ATA version %d\n", i); 1863 drvp->ata_vers = i; 1864 break; 1865 } 1866 } 1867 } 1868 #endif 1869 1870 /* An ATAPI device is at last PIO mode 3 */ 1871 if (drvp->drive_type == ATA_DRIVET_ATAPI) 1872 drvp->PIO_mode = 3; 1873 1874 /* 1875 * It's not in the specs, but it seems that some drive 1876 * returns 0xffff in atap_extensions when this field is invalid 1877 */ 1878 if (params.atap_extensions != 0xffff && 1879 (params.atap_extensions & WDC_EXT_MODES)) { 1880 /* 1881 * XXX some drives report something wrong here (they claim to 1882 * support PIO mode 8 !). As mode is coded on 3 bits in 1883 * SET FEATURE, limit it to 7 (so limit i to 4). 1884 * If higher mode than 7 is found, abort. 1885 */ 1886 for (i = 7; i >= 0; i--) { 1887 if ((params.atap_piomode_supp & (1 << i)) == 0) 1888 continue; 1889 if (i > 4) 1890 return; 1891 /* 1892 * See if mode is accepted. 1893 * If the controller can't set its PIO mode, 1894 * assume the defaults are good, so don't try 1895 * to set it 1896 */ 1897 if (atac->atac_set_modes) 1898 /* 1899 * It's OK to pool here, it's fast enough 1900 * to not bother waiting for interrupt 1901 */ 1902 if (ata_set_mode(drvp, 0x08 | (i + 3), 1903 AT_WAIT) != CMD_OK) 1904 continue; 1905 if (!printed) { 1906 aprint_verbose_dev(drv_dev, 1907 "drive supports PIO mode %d", i + 3); 1908 sep = ","; 1909 printed = 1; 1910 } 1911 /* 1912 * If controller's driver can't set its PIO mode, 1913 * get the highter one for the drive. 1914 */ 1915 if (atac->atac_set_modes == NULL || 1916 atac->atac_pio_cap >= i + 3) { 1917 drvp->PIO_mode = i + 3; 1918 drvp->PIO_cap = i + 3; 1919 break; 1920 } 1921 } 1922 if (!printed) { 1923 /* 1924 * We didn't find a valid PIO mode. 1925 * Assume the values returned for DMA are buggy too 1926 */ 1927 return; 1928 } 1929 ata_channel_lock(chp); 1930 drvp->drive_flags |= ATA_DRIVE_MODE; 1931 ata_channel_unlock(chp); 1932 printed = 0; 1933 for (i = 7; i >= 0; i--) { 1934 if ((params.atap_dmamode_supp & (1 << i)) == 0) 1935 continue; 1936 #if NATA_DMA 1937 if ((atac->atac_cap & ATAC_CAP_DMA) && 1938 atac->atac_set_modes != NULL) 1939 if (ata_set_mode(drvp, 0x20 | i, AT_WAIT) 1940 != CMD_OK) 1941 continue; 1942 #endif 1943 if (!printed) { 1944 aprint_verbose("%s DMA mode %d", sep, i); 1945 sep = ","; 1946 printed = 1; 1947 } 1948 #if NATA_DMA 1949 if (atac->atac_cap & ATAC_CAP_DMA) { 1950 if (atac->atac_set_modes != NULL && 1951 atac->atac_dma_cap < i) 1952 continue; 1953 drvp->DMA_mode = i; 1954 drvp->DMA_cap = i; 1955 ata_channel_lock(chp); 1956 drvp->drive_flags |= ATA_DRIVE_DMA; 1957 ata_channel_unlock(chp); 1958 } 1959 #endif 1960 break; 1961 } 1962 if (params.atap_extensions & WDC_EXT_UDMA_MODES) { 1963 printed = 0; 1964 for (i = 7; i >= 0; i--) { 1965 if ((params.atap_udmamode_supp & (1 << i)) 1966 == 0) 1967 continue; 1968 #if NATA_UDMA 1969 if (atac->atac_set_modes != NULL && 1970 (atac->atac_cap & ATAC_CAP_UDMA)) 1971 if (ata_set_mode(drvp, 0x40 | i, 1972 AT_WAIT) != CMD_OK) 1973 continue; 1974 #endif 1975 if (!printed) { 1976 aprint_verbose("%s Ultra-DMA mode %d", 1977 sep, i); 1978 if (i == 2) 1979 aprint_verbose(" (Ultra/33)"); 1980 else if (i == 4) 1981 aprint_verbose(" (Ultra/66)"); 1982 else if (i == 5) 1983 aprint_verbose(" (Ultra/100)"); 1984 else if (i == 6) 1985 aprint_verbose(" (Ultra/133)"); 1986 sep = ","; 1987 printed = 1; 1988 } 1989 #if NATA_UDMA 1990 if (atac->atac_cap & ATAC_CAP_UDMA) { 1991 if (atac->atac_set_modes != NULL && 1992 atac->atac_udma_cap < i) 1993 continue; 1994 drvp->UDMA_mode = i; 1995 drvp->UDMA_cap = i; 1996 ata_channel_lock(chp); 1997 drvp->drive_flags |= ATA_DRIVE_UDMA; 1998 ata_channel_unlock(chp); 1999 } 2000 #endif 2001 break; 2002 } 2003 } 2004 } 2005 2006 ata_channel_lock(chp); 2007 drvp->drive_flags &= ~ATA_DRIVE_NOSTREAM; 2008 if (drvp->drive_type == ATA_DRIVET_ATAPI) { 2009 if (atac->atac_cap & ATAC_CAP_ATAPI_NOSTREAM) 2010 drvp->drive_flags |= ATA_DRIVE_NOSTREAM; 2011 } else { 2012 if (atac->atac_cap & ATAC_CAP_ATA_NOSTREAM) 2013 drvp->drive_flags |= ATA_DRIVE_NOSTREAM; 2014 } 2015 ata_channel_unlock(chp); 2016 2017 /* Try to guess ATA version here, if it didn't get reported */ 2018 if (drvp->ata_vers == 0) { 2019 #if NATA_UDMA 2020 if (drvp->drive_flags & ATA_DRIVE_UDMA) 2021 drvp->ata_vers = 4; /* should be at last ATA-4 */ 2022 else 2023 #endif 2024 if (drvp->PIO_cap > 2) 2025 drvp->ata_vers = 2; /* should be at last ATA-2 */ 2026 } 2027 cf_flags = device_cfdata(drv_dev)->cf_flags; 2028 if (cf_flags & ATA_CONFIG_PIO_SET) { 2029 ata_channel_lock(chp); 2030 drvp->PIO_mode = 2031 (cf_flags & ATA_CONFIG_PIO_MODES) >> ATA_CONFIG_PIO_OFF; 2032 drvp->drive_flags |= ATA_DRIVE_MODE; 2033 ata_channel_unlock(chp); 2034 } 2035 #if NATA_DMA 2036 if ((atac->atac_cap & ATAC_CAP_DMA) == 0) { 2037 /* don't care about DMA modes */ 2038 return; 2039 } 2040 if (cf_flags & ATA_CONFIG_DMA_SET) { 2041 ata_channel_lock(chp); 2042 if ((cf_flags & ATA_CONFIG_DMA_MODES) == 2043 ATA_CONFIG_DMA_DISABLE) { 2044 drvp->drive_flags &= ~ATA_DRIVE_DMA; 2045 } else { 2046 drvp->DMA_mode = (cf_flags & ATA_CONFIG_DMA_MODES) >> 2047 ATA_CONFIG_DMA_OFF; 2048 drvp->drive_flags |= ATA_DRIVE_DMA | ATA_DRIVE_MODE; 2049 } 2050 ata_channel_unlock(chp); 2051 } 2052 2053 /* 2054 * Probe WRITE DMA FUA EXT. Support is mandatory for devices 2055 * supporting LBA48, but nevertheless confirm with the feature flag. 2056 */ 2057 if (drvp->drive_flags & ATA_DRIVE_DMA) { 2058 if ((params.atap_cmd2_en & ATA_CMD2_LBA48) != 0 2059 && (params.atap_cmd_def & ATA_CMDE_WFE)) { 2060 drvp->drive_flags |= ATA_DRIVE_WFUA; 2061 aprint_verbose("%s WRITE DMA FUA", sep); 2062 sep = ","; 2063 } 2064 } 2065 2066 /* Probe NCQ support - READ/WRITE FPDMA QUEUED command support */ 2067 ata_channel_lock(chp); 2068 drvp->drv_openings = 1; 2069 if (params.atap_sata_caps & SATA_NATIVE_CMDQ) { 2070 if (atac->atac_cap & ATAC_CAP_NCQ) 2071 drvp->drive_flags |= ATA_DRIVE_NCQ; 2072 drvp->drv_openings = 2073 (params.atap_queuedepth & WDC_QUEUE_DEPTH_MASK) + 1; 2074 aprint_verbose("%s NCQ (%d tags)", sep, drvp->drv_openings); 2075 sep = ","; 2076 2077 if (params.atap_sata_caps & SATA_NCQ_PRIO) { 2078 drvp->drive_flags |= ATA_DRIVE_NCQ_PRIO; 2079 aprint_verbose(" w/PRIO"); 2080 } 2081 } 2082 ata_channel_unlock(chp); 2083 2084 if (printed) 2085 aprint_verbose("\n"); 2086 2087 #if NATA_UDMA 2088 if ((atac->atac_cap & ATAC_CAP_UDMA) == 0) { 2089 /* don't care about UDMA modes */ 2090 return; 2091 } 2092 if (cf_flags & ATA_CONFIG_UDMA_SET) { 2093 ata_channel_lock(chp); 2094 if ((cf_flags & ATA_CONFIG_UDMA_MODES) == 2095 ATA_CONFIG_UDMA_DISABLE) { 2096 drvp->drive_flags &= ~ATA_DRIVE_UDMA; 2097 } else { 2098 drvp->UDMA_mode = (cf_flags & ATA_CONFIG_UDMA_MODES) >> 2099 ATA_CONFIG_UDMA_OFF; 2100 drvp->drive_flags |= ATA_DRIVE_UDMA | ATA_DRIVE_MODE; 2101 } 2102 ata_channel_unlock(chp); 2103 } 2104 #endif /* NATA_UDMA */ 2105 #endif /* NATA_DMA */ 2106 } 2107 2108 /* management of the /dev/atabus* devices */ 2109 int 2110 atabusopen(dev_t dev, int flag, int fmt, struct lwp *l) 2111 { 2112 struct atabus_softc *sc; 2113 int error; 2114 2115 sc = device_lookup_private(&atabus_cd, minor(dev)); 2116 if (sc == NULL) 2117 return (ENXIO); 2118 2119 if (sc->sc_flags & ATABUSCF_OPEN) 2120 return (EBUSY); 2121 2122 if ((error = ata_addref(sc->sc_chan)) != 0) 2123 return (error); 2124 2125 sc->sc_flags |= ATABUSCF_OPEN; 2126 2127 return (0); 2128 } 2129 2130 2131 int 2132 atabusclose(dev_t dev, int flag, int fmt, struct lwp *l) 2133 { 2134 struct atabus_softc *sc = 2135 device_lookup_private(&atabus_cd, minor(dev)); 2136 2137 ata_delref(sc->sc_chan); 2138 2139 sc->sc_flags &= ~ATABUSCF_OPEN; 2140 2141 return (0); 2142 } 2143 2144 int 2145 atabusioctl(dev_t dev, u_long cmd, void *addr, int flag, struct lwp *l) 2146 { 2147 struct atabus_softc *sc = 2148 device_lookup_private(&atabus_cd, minor(dev)); 2149 struct ata_channel *chp = sc->sc_chan; 2150 int min_drive, max_drive, drive; 2151 int error; 2152 2153 /* 2154 * Enforce write permission for ioctls that change the 2155 * state of the bus. Host adapter specific ioctls must 2156 * be checked by the adapter driver. 2157 */ 2158 switch (cmd) { 2159 case ATABUSIOSCAN: 2160 case ATABUSIODETACH: 2161 case ATABUSIORESET: 2162 if ((flag & FWRITE) == 0) 2163 return (EBADF); 2164 } 2165 2166 switch (cmd) { 2167 case ATABUSIORESET: 2168 ata_channel_lock(chp); 2169 ata_thread_run(sc->sc_chan, AT_WAIT | AT_POLL, 2170 ATACH_TH_RESET, ATACH_NODRIVE); 2171 ata_channel_unlock(chp); 2172 return 0; 2173 case ATABUSIOSCAN: 2174 { 2175 #if 0 2176 struct atabusioscan_args *a= 2177 (struct atabusioscan_args *)addr; 2178 #endif 2179 if ((chp->ch_drive[0].drive_type == ATA_DRIVET_OLD) || 2180 (chp->ch_drive[1].drive_type == ATA_DRIVET_OLD)) 2181 return (EOPNOTSUPP); 2182 return (EOPNOTSUPP); 2183 } 2184 case ATABUSIODETACH: 2185 { 2186 struct atabusiodetach_args *a= 2187 (struct atabusiodetach_args *)addr; 2188 if ((chp->ch_drive[0].drive_type == ATA_DRIVET_OLD) || 2189 (chp->ch_drive[1].drive_type == ATA_DRIVET_OLD)) 2190 return (EOPNOTSUPP); 2191 switch (a->at_dev) { 2192 case -1: 2193 min_drive = 0; 2194 max_drive = 1; 2195 break; 2196 case 0: 2197 case 1: 2198 min_drive = max_drive = a->at_dev; 2199 break; 2200 default: 2201 return (EINVAL); 2202 } 2203 for (drive = min_drive; drive <= max_drive; drive++) { 2204 if (chp->ch_drive[drive].drv_softc != NULL) { 2205 error = config_detach( 2206 chp->ch_drive[drive].drv_softc, 0); 2207 if (error) 2208 return (error); 2209 KASSERT(chp->ch_drive[drive].drv_softc == NULL); 2210 } 2211 } 2212 return 0; 2213 } 2214 default: 2215 return ENOTTY; 2216 } 2217 } 2218 2219 static bool 2220 atabus_suspend(device_t dv, const pmf_qual_t *qual) 2221 { 2222 struct atabus_softc *sc = device_private(dv); 2223 struct ata_channel *chp = sc->sc_chan; 2224 2225 ata_channel_idle(chp); 2226 2227 return true; 2228 } 2229 2230 static bool 2231 atabus_resume(device_t dv, const pmf_qual_t *qual) 2232 { 2233 struct atabus_softc *sc = device_private(dv); 2234 struct ata_channel *chp = sc->sc_chan; 2235 2236 /* 2237 * XXX joerg: with wdc, the first channel unfreezes the controler. 2238 * Move this the reset and queue idling into wdc. 2239 */ 2240 ata_channel_lock(chp); 2241 if (chp->ch_queue->queue_freeze == 0) { 2242 ata_channel_unlock(chp); 2243 goto out; 2244 } 2245 2246 /* unfreeze the queue and reset drives */ 2247 ata_channel_thaw_locked(chp); 2248 2249 /* reset channel only if there are drives attached */ 2250 if (chp->ch_ndrives > 0) 2251 ata_thread_run(chp, AT_WAIT, ATACH_TH_RESET, ATACH_NODRIVE); 2252 2253 ata_channel_unlock(chp); 2254 2255 out: 2256 return true; 2257 } 2258 2259 static int 2260 atabus_rescan(device_t self, const char *ifattr, const int *locators) 2261 { 2262 struct atabus_softc *sc = device_private(self); 2263 struct ata_channel *chp = sc->sc_chan; 2264 struct atabus_initq *initq; 2265 int i; 2266 2267 /* 2268 * we can rescan a port multiplier atabus, even if some devices are 2269 * still attached 2270 */ 2271 if (chp->ch_satapmp_nports == 0) { 2272 if (chp->atapibus != NULL) { 2273 return EBUSY; 2274 } 2275 2276 KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL); 2277 for (i = 0; i < chp->ch_ndrives; i++) { 2278 if (chp->ch_drive[i].drv_softc != NULL) { 2279 return EBUSY; 2280 } 2281 } 2282 } 2283 2284 initq = kmem_zalloc(sizeof(*initq), KM_SLEEP); 2285 initq->atabus_sc = sc; 2286 mutex_enter(&atabus_qlock); 2287 TAILQ_INSERT_TAIL(&atabus_initq_head, initq, atabus_initq); 2288 mutex_exit(&atabus_qlock); 2289 config_pending_incr(sc->sc_dev); 2290 2291 ata_channel_lock(chp); 2292 chp->ch_flags |= ATACH_TH_RESCAN; 2293 cv_signal(&chp->ch_thr_idle); 2294 ata_channel_unlock(chp); 2295 2296 return 0; 2297 } 2298 2299 void 2300 ata_delay(struct ata_channel *chp, int ms, const char *msg, int flags) 2301 { 2302 KASSERT(mutex_owned(&chp->ch_lock)); 2303 2304 if ((flags & (AT_WAIT | AT_POLL)) == AT_POLL) { 2305 /* 2306 * can't use kpause(), we may be in interrupt context 2307 * or taking a crash dump 2308 */ 2309 delay(ms * 1000); 2310 } else { 2311 int pause = mstohz(ms); 2312 2313 kpause(msg, false, pause > 0 ? pause : 1, &chp->ch_lock); 2314 } 2315 } 2316 2317 void 2318 atacmd_toncq(struct ata_xfer *xfer, uint8_t *cmd, uint16_t *count, 2319 uint16_t *features, uint8_t *device) 2320 { 2321 if ((xfer->c_flags & C_NCQ) == 0) { 2322 /* FUA handling for non-NCQ drives */ 2323 if (xfer->c_bio.flags & ATA_FUA 2324 && *cmd == WDCC_WRITEDMA_EXT) 2325 *cmd = WDCC_WRITEDMA_FUA_EXT; 2326 2327 return; 2328 } 2329 2330 *cmd = (xfer->c_bio.flags & ATA_READ) ? 2331 WDCC_READ_FPDMA_QUEUED : WDCC_WRITE_FPDMA_QUEUED; 2332 2333 /* for FPDMA the block count is in features */ 2334 *features = *count; 2335 2336 /* NCQ tag */ 2337 *count = (xfer->c_slot << 3); 2338 2339 if (xfer->c_bio.flags & ATA_PRIO_HIGH) 2340 *count |= WDSC_PRIO_HIGH; 2341 2342 /* other device flags */ 2343 if (xfer->c_bio.flags & ATA_FUA) 2344 *device |= WDSD_FUA; 2345 } 2346 2347 void 2348 ata_wait_cmd(struct ata_channel *chp, struct ata_xfer *xfer) 2349 { 2350 struct ata_queue *chq = chp->ch_queue; 2351 struct ata_command *ata_c = &xfer->c_ata_c; 2352 2353 ata_channel_lock(chp); 2354 2355 while ((ata_c->flags & AT_DONE) == 0) 2356 cv_wait(&chq->c_cmd_finish, &chp->ch_lock); 2357 2358 ata_channel_unlock(chp); 2359 2360 KASSERT((ata_c->flags & AT_DONE) != 0); 2361 } 2362
Indexes created Wed Sep 24 15:09:51 GMT 2025