Home | History | Annotate | Line # | Download | only in ata
ata_wdc.c revision 1.21
      1  1.21    bouyer /*	$NetBSD: ata_wdc.c,v 1.21 1999/08/09 09:43:11 bouyer Exp $	*/
      2   1.2    bouyer 
      3   1.2    bouyer /*
      4   1.2    bouyer  * Copyright (c) 1998 Manuel Bouyer.
      5   1.2    bouyer  *
      6   1.2    bouyer  * Redistribution and use in source and binary forms, with or without
      7   1.2    bouyer  * modification, are permitted provided that the following conditions
      8   1.2    bouyer  * are met:
      9   1.2    bouyer  * 1. Redistributions of source code must retain the above copyright
     10   1.2    bouyer  *    notice, this list of conditions and the following disclaimer.
     11   1.2    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     12   1.2    bouyer  *    notice, this list of conditions and the following disclaimer in the
     13   1.2    bouyer  *    documentation and/or other materials provided with the distribution.
     14   1.2    bouyer  * 3. All advertising materials mentioning features or use of this software
     15   1.2    bouyer  *    must display the following acknowledgement:
     16   1.2    bouyer  *	This product includes software developed by the University of
     17   1.2    bouyer  *	California, Berkeley and its contributors.
     18   1.2    bouyer  * 4. Neither the name of the University nor the names of its contributors
     19   1.2    bouyer  *    may be used to endorse or promote products derived from this software
     20   1.2    bouyer  *    without specific prior written permission.
     21   1.2    bouyer  *
     22   1.2    bouyer  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     23   1.2    bouyer  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     24   1.2    bouyer  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     25   1.2    bouyer  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     26   1.2    bouyer  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     27   1.2    bouyer  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     28   1.2    bouyer  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     29   1.2    bouyer  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     30   1.2    bouyer  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     31   1.2    bouyer  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     32   1.2    bouyer  * SUCH DAMAGE.
     33   1.2    bouyer  *
     34   1.2    bouyer  */
     35   1.2    bouyer 
     36   1.2    bouyer /*-
     37   1.2    bouyer  * Copyright (c) 1998 The NetBSD Foundation, Inc.
     38   1.2    bouyer  * All rights reserved.
     39   1.2    bouyer  *
     40   1.2    bouyer  * This code is derived from software contributed to The NetBSD Foundation
     41   1.2    bouyer  * by Charles M. Hannum, by Onno van der Linden and by Manuel Bouyer.
     42   1.2    bouyer  *
     43   1.2    bouyer  * Redistribution and use in source and binary forms, with or without
     44   1.2    bouyer  * modification, are permitted provided that the following conditions
     45   1.2    bouyer  * are met:
     46   1.2    bouyer  * 1. Redistributions of source code must retain the above copyright
     47   1.2    bouyer  *    notice, this list of conditions and the following disclaimer.
     48   1.2    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     49   1.2    bouyer  *    notice, this list of conditions and the following disclaimer in the
     50   1.2    bouyer  *    documentation and/or other materials provided with the distribution.
     51   1.2    bouyer  * 3. All advertising materials mentioning features or use of this software
     52   1.2    bouyer  *    must display the following acknowledgement:
     53   1.2    bouyer  *        This product includes software developed by the NetBSD
     54   1.2    bouyer  *        Foundation, Inc. and its contributors.
     55   1.2    bouyer  * 4. Neither the name of The NetBSD Foundation nor the names of its
     56   1.2    bouyer  *    contributors may be used to endorse or promote products derived
     57   1.2    bouyer  *    from this software without specific prior written permission.
     58   1.2    bouyer  *
     59   1.2    bouyer  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     60   1.2    bouyer  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     61   1.2    bouyer  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     62   1.2    bouyer  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     63   1.2    bouyer  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     64   1.2    bouyer  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     65   1.2    bouyer  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     66   1.2    bouyer  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     67   1.2    bouyer  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     68   1.2    bouyer  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     69   1.2    bouyer  * POSSIBILITY OF SUCH DAMAGE.
     70   1.2    bouyer  */
     71   1.2    bouyer 
     72  1.15   hubertf #ifndef WDCDEBUG
     73   1.2    bouyer #define WDCDEBUG
     74  1.15   hubertf #endif /* WDCDEBUG */
     75   1.2    bouyer 
     76   1.2    bouyer #include <sys/param.h>
     77   1.2    bouyer #include <sys/systm.h>
     78   1.2    bouyer #include <sys/kernel.h>
     79   1.2    bouyer #include <sys/file.h>
     80   1.2    bouyer #include <sys/stat.h>
     81   1.2    bouyer #include <sys/buf.h>
     82   1.2    bouyer #include <sys/malloc.h>
     83   1.2    bouyer #include <sys/device.h>
     84   1.2    bouyer #include <sys/disklabel.h>
     85   1.2    bouyer #include <sys/syslog.h>
     86   1.2    bouyer #include <sys/proc.h>
     87   1.2    bouyer 
     88   1.2    bouyer #include <machine/intr.h>
     89   1.2    bouyer #include <machine/bus.h>
     90   1.2    bouyer #ifndef __BUS_SPACE_HAS_STREAM_METHODS
     91   1.2    bouyer #define    bus_space_write_multi_stream_2    bus_space_write_multi_2
     92   1.2    bouyer #define    bus_space_write_multi_stream_4    bus_space_write_multi_4
     93   1.2    bouyer #define    bus_space_read_multi_stream_2    bus_space_read_multi_2
     94   1.2    bouyer #define    bus_space_read_multi_stream_4    bus_space_read_multi_4
     95   1.2    bouyer #endif /* __BUS_SPACE_HAS_STREAM_METHODS */
     96   1.2    bouyer 
     97   1.2    bouyer #include <dev/ata/atareg.h>
     98   1.2    bouyer #include <dev/ata/atavar.h>
     99   1.2    bouyer #include <dev/ic/wdcreg.h>
    100   1.2    bouyer #include <dev/ic/wdcvar.h>
    101   1.2    bouyer #include <dev/ata/wdvar.h>
    102   1.2    bouyer 
    103   1.2    bouyer #define DEBUG_INTR   0x01
    104   1.2    bouyer #define DEBUG_XFERS  0x02
    105   1.2    bouyer #define DEBUG_STATUS 0x04
    106   1.2    bouyer #define DEBUG_FUNCS  0x08
    107   1.2    bouyer #define DEBUG_PROBE  0x10
    108   1.2    bouyer #ifdef WDCDEBUG
    109   1.3   thorpej int wdcdebug_wd_mask = 0;
    110   1.2    bouyer #define WDCDEBUG_PRINT(args, level) \
    111   1.2    bouyer 	if (wdcdebug_wd_mask & (level)) \
    112   1.2    bouyer 		printf args
    113   1.2    bouyer #else
    114   1.2    bouyer #define WDCDEBUG_PRINT(args, level)
    115   1.2    bouyer #endif
    116   1.2    bouyer 
    117  1.17    bouyer #define ATA_DELAY 10000 /* 10s for a drive I/O */
    118   1.2    bouyer 
    119   1.2    bouyer void  wdc_ata_bio_start  __P((struct channel_softc *,struct wdc_xfer *));
    120  1.20    bouyer void  _wdc_ata_bio_start  __P((struct channel_softc *,struct wdc_xfer *));
    121  1.19    bouyer int   wdc_ata_bio_intr   __P((struct channel_softc *, struct wdc_xfer *, int));
    122   1.2    bouyer void  wdc_ata_bio_done   __P((struct channel_softc *, struct wdc_xfer *));
    123  1.19    bouyer int   wdc_ata_ctrl_intr __P((struct channel_softc *, struct wdc_xfer *, int));
    124  1.16    bouyer int   wdc_ata_err __P((struct ata_drive_datas *, struct ata_bio *));
    125   1.2    bouyer #define WDC_ATA_NOERR 0x00 /* Drive doesn't report an error */
    126   1.2    bouyer #define WDC_ATA_RECOV 0x01 /* There was a recovered error */
    127   1.2    bouyer #define WDC_ATA_ERR   0x02 /* Drive reports an error */
    128   1.2    bouyer 
    129   1.2    bouyer /*
    130   1.2    bouyer  * Handle block I/O operation. Return WDC_COMPLETE, WDC_QUEUED, or
    131   1.2    bouyer  * WDC_TRY_AGAIN. Must be called at splio().
    132   1.2    bouyer  */
    133   1.2    bouyer int
    134   1.2    bouyer wdc_ata_bio(drvp, ata_bio)
    135   1.2    bouyer 	struct ata_drive_datas *drvp;
    136   1.2    bouyer 	struct ata_bio *ata_bio;
    137   1.2    bouyer {
    138   1.2    bouyer 	struct wdc_xfer *xfer;
    139   1.2    bouyer 	struct channel_softc *chp = drvp->chnl_softc;
    140   1.2    bouyer 
    141   1.2    bouyer 	xfer = wdc_get_xfer(WDC_NOSLEEP);
    142   1.2    bouyer 	if (xfer == NULL)
    143   1.2    bouyer 		return WDC_TRY_AGAIN;
    144   1.2    bouyer 	if (ata_bio->flags & ATA_POLL)
    145   1.2    bouyer 		xfer->c_flags |= C_POLL;
    146   1.2    bouyer 	if ((drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) &&
    147   1.2    bouyer 	    (ata_bio->flags & ATA_SINGLE) == 0)
    148   1.2    bouyer 		xfer->c_flags |= C_DMA;
    149   1.2    bouyer 	xfer->drive = drvp->drive;
    150   1.2    bouyer 	xfer->cmd = ata_bio;
    151   1.2    bouyer 	xfer->databuf = ata_bio->databuf;
    152   1.2    bouyer 	xfer->c_bcount = ata_bio->bcount;
    153   1.2    bouyer 	xfer->c_start = wdc_ata_bio_start;
    154   1.2    bouyer 	xfer->c_intr = wdc_ata_bio_intr;
    155   1.2    bouyer 	wdc_exec_xfer(chp, xfer);
    156   1.2    bouyer 	return (ata_bio->flags & ATA_ITSDONE) ? WDC_COMPLETE : WDC_QUEUED;
    157   1.2    bouyer }
    158   1.2    bouyer 
    159   1.2    bouyer void
    160   1.2    bouyer wdc_ata_bio_start(chp, xfer)
    161   1.2    bouyer 	struct channel_softc *chp;
    162   1.2    bouyer 	struct wdc_xfer *xfer;
    163   1.2    bouyer {
    164   1.2    bouyer 	struct ata_bio *ata_bio = xfer->cmd;
    165  1.20    bouyer 	WDCDEBUG_PRINT(("wdc_ata_bio_start %s:%d:%d\n",
    166  1.20    bouyer 	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive),
    167  1.20    bouyer 	    DEBUG_XFERS);
    168  1.20    bouyer 
    169  1.20    bouyer 	/* start timeout machinery */
    170  1.20    bouyer 	if ((ata_bio->flags & ATA_POLL) == 0)
    171  1.20    bouyer 		timeout(wdctimeout, chp, ATA_DELAY / 1000 * hz);
    172  1.20    bouyer 	_wdc_ata_bio_start(chp, xfer);
    173  1.20    bouyer }
    174  1.20    bouyer 
    175  1.20    bouyer void
    176  1.20    bouyer _wdc_ata_bio_start(chp, xfer)
    177  1.20    bouyer 	struct channel_softc *chp;
    178  1.20    bouyer 	struct wdc_xfer *xfer;
    179  1.20    bouyer {
    180  1.20    bouyer 	struct ata_bio *ata_bio = xfer->cmd;
    181   1.2    bouyer 	struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
    182   1.2    bouyer 	u_int16_t cyl;
    183   1.2    bouyer 	u_int8_t head, sect, cmd = 0;
    184   1.2    bouyer 	int nblks;
    185  1.16    bouyer 	int ata_delay;
    186   1.2    bouyer 	int dma_flags = 0;
    187   1.2    bouyer 
    188  1.20    bouyer 	WDCDEBUG_PRINT(("_wdc_ata_bio_start %s:%d:%d\n",
    189   1.2    bouyer 	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive),
    190  1.20    bouyer 	    DEBUG_INTR | DEBUG_XFERS);
    191   1.2    bouyer 	/* Do control operations specially. */
    192   1.2    bouyer 	if (drvp->state < READY) {
    193   1.2    bouyer 		/*
    194   1.2    bouyer 		 * Actually, we want to be careful not to mess with the control
    195   1.2    bouyer 		 * state if the device is currently busy, but we can assume
    196   1.2    bouyer 		 * that we never get to this point if that's the case.
    197   1.2    bouyer 		 */
    198   1.2    bouyer 		/* at this point, we should only be in RECAL state */
    199   1.2    bouyer 		if (drvp->state != RECAL) {
    200  1.20    bouyer 			printf("%s:%d:%d: bad state %d in _wdc_ata_bio_start\n",
    201   1.2    bouyer 			    chp->wdc->sc_dev.dv_xname, chp->channel,
    202   1.2    bouyer 			    xfer->drive, drvp->state);
    203  1.20    bouyer 			panic("_wdc_ata_bio_start: bad state");
    204   1.2    bouyer 		}
    205   1.2    bouyer 		xfer->c_intr = wdc_ata_ctrl_intr;
    206   1.2    bouyer 		bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
    207   1.2    bouyer 		    WDSD_IBM | (xfer->drive << 4));
    208  1.17    bouyer 		if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY) != 0)
    209   1.2    bouyer 			goto timeout;
    210   1.2    bouyer 		wdccommandshort(chp, xfer->drive, WDCC_RECAL);
    211   1.2    bouyer 		drvp->state = RECAL_WAIT;
    212   1.2    bouyer 		if ((ata_bio->flags & ATA_POLL) == 0) {
    213   1.2    bouyer 			chp->ch_flags |= WDCF_IRQ_WAIT;
    214   1.2    bouyer 		} else {
    215   1.2    bouyer 			/* Wait for at last 400ns for status bit to be valid */
    216  1.19    bouyer 			DELAY(1);
    217  1.19    bouyer 			wdc_ata_ctrl_intr(chp, xfer, 0);
    218   1.2    bouyer 		}
    219   1.2    bouyer 		return;
    220   1.2    bouyer 	}
    221   1.2    bouyer 
    222   1.2    bouyer 	if (xfer->c_flags & C_DMA) {
    223   1.2    bouyer 		dma_flags = (ata_bio->flags & ATA_READ) ?  WDC_DMA_READ : 0;
    224   1.2    bouyer 		dma_flags |= (ata_bio->flags & ATA_POLL) ?  WDC_DMA_POLL : 0;
    225   1.2    bouyer 	}
    226  1.16    bouyer 	if (ata_bio->flags & ATA_SINGLE)
    227  1.17    bouyer 		ata_delay = ATA_DELAY;
    228  1.16    bouyer 	else
    229  1.17    bouyer 		ata_delay = ATA_DELAY;
    230   1.2    bouyer again:
    231   1.2    bouyer 	/*
    232   1.2    bouyer 	 *
    233   1.2    bouyer 	 * When starting a multi-sector transfer, or doing single-sector
    234   1.2    bouyer 	 * transfers...
    235   1.2    bouyer 	 */
    236   1.2    bouyer 	if (xfer->c_skip == 0 || (ata_bio->flags & ATA_SINGLE) != 0) {
    237   1.2    bouyer 		if (ata_bio->flags & ATA_SINGLE)
    238   1.2    bouyer 			nblks = 1;
    239   1.2    bouyer 		else
    240   1.2    bouyer 			nblks = xfer->c_bcount / ata_bio->lp->d_secsize;
    241   1.2    bouyer 		/* Check for bad sectors and adjust transfer, if necessary. */
    242   1.2    bouyer 		if ((ata_bio->lp->d_flags & D_BADSECT) != 0) {
    243   1.2    bouyer 			long blkdiff;
    244   1.2    bouyer 			int i;
    245   1.2    bouyer 			for (i = 0; (blkdiff = ata_bio->badsect[i]) != -1;
    246   1.2    bouyer 			    i++) {
    247   1.2    bouyer 				blkdiff -= ata_bio->blkno;
    248   1.2    bouyer 				if (blkdiff < 0)
    249   1.2    bouyer 					continue;
    250   1.2    bouyer 				if (blkdiff == 0) {
    251   1.2    bouyer 					/* Replace current block of transfer. */
    252   1.2    bouyer 					ata_bio->blkno =
    253   1.2    bouyer 					    ata_bio->lp->d_secperunit -
    254   1.2    bouyer 					    ata_bio->lp->d_nsectors - i - 1;
    255   1.2    bouyer 				}
    256   1.2    bouyer 				if (blkdiff < nblks) {
    257   1.2    bouyer 					/* Bad block inside transfer. */
    258   1.2    bouyer 					ata_bio->flags |= ATA_SINGLE;
    259   1.2    bouyer 					nblks = 1;
    260   1.2    bouyer 				}
    261   1.2    bouyer 				break;
    262   1.2    bouyer 			}
    263   1.2    bouyer 		/* Transfer is okay now. */
    264   1.2    bouyer 		}
    265   1.2    bouyer 		if (ata_bio->flags & ATA_LBA) {
    266   1.2    bouyer 			sect = (ata_bio->blkno >> 0) & 0xff;
    267   1.2    bouyer 			cyl = (ata_bio->blkno >> 8) & 0xffff;
    268   1.2    bouyer 			head = (ata_bio->blkno >> 24) & 0x0f;
    269   1.2    bouyer 			head |= WDSD_LBA;
    270   1.2    bouyer 		} else {
    271   1.2    bouyer 			int blkno = ata_bio->blkno;
    272   1.2    bouyer 			sect = blkno % ata_bio->lp->d_nsectors;
    273   1.2    bouyer 			sect++;    /* Sectors begin with 1, not 0. */
    274   1.2    bouyer 			blkno /= ata_bio->lp->d_nsectors;
    275   1.2    bouyer 			head = blkno % ata_bio->lp->d_ntracks;
    276   1.2    bouyer 			blkno /= ata_bio->lp->d_ntracks;
    277   1.2    bouyer 			cyl = blkno;
    278   1.2    bouyer 			head |= WDSD_CHS;
    279   1.2    bouyer 		}
    280   1.2    bouyer 		if (xfer->c_flags & C_DMA) {
    281   1.2    bouyer 			ata_bio->nblks = nblks;
    282   1.2    bouyer 			ata_bio->nbytes = xfer->c_bcount;
    283   1.2    bouyer 			cmd = (ata_bio->flags & ATA_READ) ?
    284   1.2    bouyer 			    WDCC_READDMA : WDCC_WRITEDMA;
    285   1.2    bouyer 			nblks = ata_bio->nblks;
    286   1.2    bouyer 	    		/* Init the DMA channel. */
    287   1.2    bouyer 			if ((*chp->wdc->dma_init)(chp->wdc->dma_arg,
    288   1.2    bouyer 			    chp->channel, xfer->drive,
    289  1.11  augustss 			    (char *)xfer->databuf + xfer->c_skip,
    290  1.11  augustss 			    ata_bio->nbytes, dma_flags) != 0) {
    291   1.2    bouyer 				ata_bio->error = ERR_DMA;
    292   1.2    bouyer 				ata_bio->r_error = 0;
    293   1.2    bouyer 				wdc_ata_bio_done(chp, xfer);
    294   1.2    bouyer 				return;
    295   1.2    bouyer 			}
    296   1.2    bouyer 			/* Initiate command */
    297   1.2    bouyer 			bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
    298   1.2    bouyer 			    WDSD_IBM | (xfer->drive << 4));
    299  1.16    bouyer 			if (wait_for_ready(chp, ata_delay) < 0)
    300   1.2    bouyer 				goto timeout;
    301   1.2    bouyer 			wdccommand(chp, xfer->drive, cmd, cyl,
    302   1.2    bouyer 			    head, sect, nblks, 0);
    303   1.2    bouyer 			/* start the DMA channel */
    304   1.2    bouyer 			(*chp->wdc->dma_start)(chp->wdc->dma_arg,
    305   1.2    bouyer 			    chp->channel, xfer->drive, dma_flags);
    306   1.2    bouyer 			/* wait for irq */
    307   1.2    bouyer 			goto intr;
    308   1.2    bouyer 		} /* else not DMA */
    309   1.2    bouyer 		ata_bio->nblks = min(nblks, ata_bio->multi);
    310   1.2    bouyer 		ata_bio->nbytes = ata_bio->nblks * ata_bio->lp->d_secsize;
    311   1.2    bouyer 		if (ata_bio->nblks > 1 && (ata_bio->flags & ATA_SINGLE) == 0) {
    312   1.2    bouyer 			cmd = (ata_bio->flags & ATA_READ) ?
    313   1.2    bouyer 			    WDCC_READMULTI : WDCC_WRITEMULTI;
    314   1.2    bouyer 		} else {
    315   1.2    bouyer 			cmd = (ata_bio->flags & ATA_READ) ?
    316   1.2    bouyer 			    WDCC_READ : WDCC_WRITE;
    317   1.2    bouyer 		}
    318   1.2    bouyer 		/* Initiate command! */
    319   1.2    bouyer 		bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
    320   1.2    bouyer 		    WDSD_IBM | (xfer->drive << 4));
    321  1.16    bouyer 		if (wait_for_ready(chp, ata_delay) < 0)
    322   1.2    bouyer 			goto timeout;
    323   1.2    bouyer 		wdccommand(chp, xfer->drive, cmd, cyl,
    324   1.2    bouyer 		    head, sect, nblks,
    325   1.2    bouyer 		    (ata_bio->lp->d_type == DTYPE_ST506) ?
    326   1.2    bouyer 		    ata_bio->lp->d_precompcyl / 4 : 0);
    327   1.2    bouyer 	} else if (ata_bio->nblks > 1) {
    328   1.2    bouyer 		/* The number of blocks in the last stretch may be smaller. */
    329   1.2    bouyer 		nblks = xfer->c_bcount / ata_bio->lp->d_secsize;
    330   1.2    bouyer 		if (ata_bio->nblks > nblks) {
    331   1.2    bouyer 		ata_bio->nblks = nblks;
    332   1.2    bouyer 		ata_bio->nbytes = xfer->c_bcount;
    333   1.2    bouyer 		}
    334   1.2    bouyer 	}
    335   1.2    bouyer 	/* If this was a write and not using DMA, push the data. */
    336   1.2    bouyer 	if ((ata_bio->flags & ATA_READ) == 0) {
    337  1.16    bouyer 		if (wait_for_drq(chp, ata_delay) != 0) {
    338   1.2    bouyer 			printf("%s:%d:%d: timeout waiting for DRQ, "
    339   1.2    bouyer 			    "st=0x%02x, err=0x%02x\n",
    340   1.2    bouyer 			    chp->wdc->sc_dev.dv_xname, chp->channel,
    341   1.2    bouyer 			    xfer->drive, chp->ch_status, chp->ch_error);
    342  1.16    bouyer 			if (wdc_ata_err(drvp, ata_bio) != WDC_ATA_ERR)
    343   1.2    bouyer 				ata_bio->error = TIMEOUT;
    344   1.2    bouyer 			wdc_ata_bio_done(chp, xfer);
    345   1.2    bouyer 			return;
    346   1.2    bouyer 		}
    347  1.16    bouyer 		if (wdc_ata_err(drvp, ata_bio) == WDC_ATA_ERR) {
    348   1.2    bouyer 			wdc_ata_bio_done(chp, xfer);
    349   1.2    bouyer 			return;
    350   1.2    bouyer 		}
    351   1.2    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_ATA_NOSTREAM)) {
    352   1.2    bouyer 			if (drvp->drive_flags & DRIVE_CAP32) {
    353   1.2    bouyer 				bus_space_write_multi_4(chp->data32iot,
    354   1.2    bouyer 				    chp->data32ioh, 0,
    355  1.12   thorpej 				    (u_int32_t *)((char *)xfer->databuf +
    356  1.12   thorpej 				                  xfer->c_skip),
    357   1.2    bouyer 				    ata_bio->nbytes >> 2);
    358   1.2    bouyer 			} else {
    359   1.2    bouyer 				bus_space_write_multi_2(chp->cmd_iot,
    360   1.2    bouyer 				    chp->cmd_ioh, wd_data,
    361  1.12   thorpej 				    (u_int16_t *)((char *)xfer->databuf +
    362  1.12   thorpej 				                  xfer->c_skip),
    363   1.2    bouyer 				    ata_bio->nbytes >> 1);
    364   1.2    bouyer 			}
    365   1.2    bouyer 		} else {
    366   1.2    bouyer 			if (drvp->drive_flags & DRIVE_CAP32) {
    367   1.2    bouyer 				bus_space_write_multi_stream_4(chp->data32iot,
    368   1.2    bouyer 				    chp->data32ioh, 0,
    369  1.12   thorpej 				    (u_int32_t *)((char *)xfer->databuf +
    370  1.12   thorpej 				                  xfer->c_skip),
    371   1.2    bouyer 				    ata_bio->nbytes >> 2);
    372   1.2    bouyer 			} else {
    373   1.2    bouyer 				bus_space_write_multi_stream_2(chp->cmd_iot,
    374   1.2    bouyer 				    chp->cmd_ioh, wd_data,
    375  1.12   thorpej 				    (u_int16_t *)((char *)xfer->databuf +
    376  1.12   thorpej 				                  xfer->c_skip),
    377   1.2    bouyer 				    ata_bio->nbytes >> 1);
    378   1.2    bouyer 			}
    379   1.2    bouyer 		}
    380   1.2    bouyer 	}
    381   1.2    bouyer 
    382   1.2    bouyer intr:	/* Wait for IRQ (either real or polled) */
    383   1.2    bouyer 	if ((ata_bio->flags & ATA_POLL) == 0) {
    384   1.2    bouyer 		chp->ch_flags |= WDCF_IRQ_WAIT;
    385   1.2    bouyer 	} else {
    386   1.2    bouyer 		/* Wait for at last 400ns for status bit to be valid */
    387   1.2    bouyer 		delay(1);
    388  1.19    bouyer 		wdc_ata_bio_intr(chp, xfer, 0);
    389   1.2    bouyer 		if ((ata_bio->flags & ATA_ITSDONE) == 0)
    390   1.2    bouyer 			goto again;
    391   1.2    bouyer 	}
    392   1.2    bouyer 	return;
    393   1.2    bouyer timeout:
    394   1.2    bouyer 	printf("%s:%d:%d: not ready, st=0x%02x, err=0x%02x\n",
    395   1.2    bouyer 	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
    396   1.2    bouyer 	    chp->ch_status, chp->ch_error);
    397  1.16    bouyer 	if (wdc_ata_err(drvp, ata_bio) != WDC_ATA_ERR)
    398   1.2    bouyer 		ata_bio->error = TIMEOUT;
    399   1.2    bouyer 	wdc_ata_bio_done(chp, xfer);
    400   1.2    bouyer 	return;
    401   1.2    bouyer }
    402   1.2    bouyer 
    403   1.2    bouyer int
    404  1.19    bouyer wdc_ata_bio_intr(chp, xfer, irq)
    405   1.2    bouyer 	struct channel_softc *chp;
    406   1.2    bouyer 	struct wdc_xfer *xfer;
    407  1.19    bouyer 	int irq;
    408   1.2    bouyer {
    409   1.2    bouyer 	struct ata_bio *ata_bio = xfer->cmd;
    410   1.2    bouyer 	struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
    411   1.2    bouyer 	int drv_err;
    412   1.2    bouyer 	int dma_flags = 0;
    413   1.2    bouyer 
    414   1.2    bouyer 	WDCDEBUG_PRINT(("wdc_ata_bio_intr %s:%d:%d\n",
    415   1.2    bouyer 	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive),
    416   1.2    bouyer 	    DEBUG_INTR | DEBUG_XFERS);
    417   1.2    bouyer 
    418   1.2    bouyer 
    419   1.2    bouyer 	/* Is it not a transfer, but a control operation? */
    420   1.2    bouyer 	if (drvp->state < READY) {
    421   1.2    bouyer 		printf("%s:%d:%d: bad state %d in wdc_ata_bio_intr\n",
    422   1.2    bouyer 		    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
    423   1.2    bouyer 		    drvp->state);
    424   1.2    bouyer 		panic("wdc_ata_bio_intr: bad state\n");
    425   1.2    bouyer 	}
    426   1.2    bouyer 
    427   1.2    bouyer 	if (xfer->c_flags & C_DMA) {
    428   1.2    bouyer 		dma_flags = (ata_bio->flags & ATA_READ) ?  WDC_DMA_READ : 0;
    429   1.2    bouyer 		dma_flags |= (ata_bio->flags & ATA_POLL) ?  WDC_DMA_POLL : 0;
    430   1.2    bouyer 	}
    431   1.2    bouyer 
    432  1.20    bouyer 	/*
    433  1.20    bouyer 	 * if we missed an interrupt in a PIO transfer, reset and restart.
    434  1.20    bouyer 	 * Don't try to continue transfer, we may have missed cycles.
    435  1.20    bouyer 	 */
    436  1.20    bouyer 	if ((xfer->c_flags & (C_TIMEOU | C_DMA)) == C_TIMEOU) {
    437  1.20    bouyer 		ata_bio->error = TIMEOUT;
    438  1.20    bouyer 		wdc_ata_bio_done(chp, xfer);
    439  1.20    bouyer 		return 1;
    440  1.20    bouyer 	}
    441  1.20    bouyer 
    442   1.2    bouyer 	/* Ack interrupt done by wait_for_unbusy */
    443  1.18    bouyer 	if (wait_for_unbusy(chp,
    444  1.19    bouyer 	    (irq == 0) ? ATA_DELAY : 0) < 0) {
    445  1.19    bouyer 		if (irq && (xfer->c_flags & C_TIMEOU) == 0)
    446  1.18    bouyer 			return 0; /* IRQ was not for us */
    447   1.2    bouyer 		printf("%s:%d:%d: device timeout, c_bcount=%d, c_skip%d\n",
    448   1.2    bouyer 		    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
    449   1.2    bouyer 		    xfer->c_bcount, xfer->c_skip);
    450   1.2    bouyer 		/* if we were using DMA, turn off DMA channel */
    451  1.10    bouyer 		if (xfer->c_flags & C_DMA) {
    452   1.2    bouyer 			(*chp->wdc->dma_finish)(chp->wdc->dma_arg,
    453   1.2    bouyer 			    chp->channel, xfer->drive, dma_flags);
    454  1.10    bouyer 			drvp->n_dmaerrs++;
    455  1.10    bouyer 		}
    456   1.2    bouyer 		ata_bio->error = TIMEOUT;
    457   1.2    bouyer 		wdc_ata_bio_done(chp, xfer);
    458   1.2    bouyer 		return 1;
    459   1.2    bouyer 	}
    460   1.2    bouyer 
    461  1.16    bouyer 	drv_err = wdc_ata_err(drvp, ata_bio);
    462   1.2    bouyer 
    463   1.2    bouyer 	/* If we were using DMA, Turn off the DMA channel and check for error */
    464   1.2    bouyer 	if (xfer->c_flags & C_DMA) {
    465   1.2    bouyer 		if (ata_bio->flags & ATA_POLL) {
    466   1.2    bouyer 			/*
    467  1.13    bouyer 			 * IDE drives deassert WDCS_BSY before transfer is
    468   1.2    bouyer 			 * complete when using DMA. Polling for DRQ to deassert
    469   1.2    bouyer 			 * is not enouth DRQ is not required to be
    470   1.7    bouyer 			 * asserted for DMA transfers, so poll for DRDY.
    471   1.2    bouyer 			 */
    472   1.2    bouyer 			if (wdcwait(chp, WDCS_DRDY | WDCS_DRQ, WDCS_DRDY,
    473  1.17    bouyer 			    ATA_DELAY) < 0) {
    474   1.7    bouyer 				printf("%s:%d:%d: polled transfer timed out "
    475   1.2    bouyer 				    "(st=0x%x)\n", chp->wdc->sc_dev.dv_xname,
    476   1.2    bouyer 				    chp->channel, xfer->drive, chp->ch_status);
    477   1.2    bouyer 				ata_bio->error = TIMEOUT;
    478  1.10    bouyer 				drv_err = WDC_ATA_ERR;
    479  1.10    bouyer 			}
    480  1.10    bouyer 		}
    481  1.10    bouyer 		if ((*chp->wdc->dma_finish)(chp->wdc->dma_arg,
    482  1.10    bouyer 		    chp->channel, xfer->drive, dma_flags) != 0) {
    483  1.10    bouyer 			if (drv_err != WDC_ATA_ERR) {
    484  1.10    bouyer 				ata_bio->error = ERR_DMA;
    485  1.10    bouyer 				drv_err = WDC_ATA_ERR;
    486   1.2    bouyer 			}
    487   1.2    bouyer 		}
    488   1.2    bouyer 		if (chp->ch_status & WDCS_DRQ) {
    489   1.2    bouyer 			if (drv_err != WDC_ATA_ERR) {
    490   1.2    bouyer 				printf("%s:%d:%d: intr with DRQ (st=0x%x)\n",
    491   1.2    bouyer 				    chp->wdc->sc_dev.dv_xname, chp->channel,
    492   1.2    bouyer 				    xfer->drive, chp->ch_status);
    493   1.2    bouyer 				ata_bio->error = TIMEOUT;
    494   1.2    bouyer 				drv_err = WDC_ATA_ERR;
    495   1.2    bouyer 			}
    496   1.2    bouyer 		}
    497   1.2    bouyer 		if (drv_err != WDC_ATA_ERR)
    498   1.2    bouyer 			goto end;
    499  1.10    bouyer 		drvp->n_dmaerrs++;
    500   1.2    bouyer 	}
    501   1.2    bouyer 
    502   1.2    bouyer 	/* if we had an error, end */
    503   1.2    bouyer 	if (drv_err == WDC_ATA_ERR) {
    504   1.2    bouyer 		wdc_ata_bio_done(chp, xfer);
    505   1.2    bouyer 		return 1;
    506   1.2    bouyer 	}
    507   1.2    bouyer 
    508   1.2    bouyer 	/* If this was a read and not using DMA, fetch the data. */
    509   1.2    bouyer 	if ((ata_bio->flags & ATA_READ) != 0) {
    510  1.14    bouyer 		if ((chp->ch_status & WDCS_DRQ) != WDCS_DRQ) {
    511   1.2    bouyer 			printf("%s:%d:%d: read intr before drq\n",
    512   1.2    bouyer 			    chp->wdc->sc_dev.dv_xname, chp->channel,
    513   1.2    bouyer 			    xfer->drive);
    514   1.2    bouyer 			ata_bio->error = TIMEOUT;
    515   1.2    bouyer 			wdc_ata_bio_done(chp, xfer);
    516   1.2    bouyer 			return 1;
    517   1.2    bouyer 		}
    518   1.2    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_ATA_NOSTREAM)) {
    519   1.2    bouyer 			if (drvp->drive_flags & DRIVE_CAP32) {
    520   1.2    bouyer 				bus_space_read_multi_4(chp->data32iot,
    521   1.2    bouyer 				    chp->data32ioh, 0,
    522  1.12   thorpej 				    (u_int32_t *)((char *)xfer->databuf +
    523  1.12   thorpej 				                  xfer->c_skip),
    524   1.2    bouyer 				    ata_bio->nbytes >> 2);
    525   1.2    bouyer 			} else {
    526   1.2    bouyer 				bus_space_read_multi_2(chp->cmd_iot,
    527   1.2    bouyer 				    chp->cmd_ioh, wd_data,
    528  1.12   thorpej 				    (u_int16_t *)((char *)xfer->databuf +
    529  1.12   thorpej 				                  xfer->c_skip),
    530   1.2    bouyer 				    ata_bio->nbytes >> 1);
    531   1.2    bouyer 			}
    532   1.2    bouyer 		} else {
    533   1.2    bouyer 			if (drvp->drive_flags & DRIVE_CAP32) {
    534   1.2    bouyer 				bus_space_read_multi_stream_4(chp->data32iot,
    535   1.2    bouyer 				    chp->data32ioh, 0,
    536  1.12   thorpej 				    (u_int32_t *)((char *)xfer->databuf +
    537  1.12   thorpej 				                  xfer->c_skip),
    538   1.2    bouyer 				    ata_bio->nbytes >> 2);
    539   1.2    bouyer 			} else {
    540   1.2    bouyer 				bus_space_read_multi_stream_2(chp->cmd_iot,
    541   1.2    bouyer 				    chp->cmd_ioh, wd_data,
    542  1.12   thorpej 				    (u_int16_t *)((char *)xfer->databuf +
    543  1.12   thorpej 				                  xfer->c_skip),
    544   1.2    bouyer 				    ata_bio->nbytes >> 1);
    545   1.2    bouyer 			}
    546   1.2    bouyer 		}
    547   1.2    bouyer 	}
    548   1.2    bouyer 
    549   1.2    bouyer end:
    550   1.2    bouyer 	ata_bio->blkno += ata_bio->nblks;
    551   1.2    bouyer 	ata_bio->blkdone += ata_bio->nblks;
    552   1.2    bouyer 	xfer->c_skip += ata_bio->nbytes;
    553   1.2    bouyer 	xfer->c_bcount -= ata_bio->nbytes;
    554   1.2    bouyer 	/* See if this transfer is complete. */
    555   1.2    bouyer 	if (xfer->c_bcount > 0) {
    556   1.2    bouyer 		if ((ata_bio->flags & ATA_POLL) == 0) {
    557   1.2    bouyer 			/* Start the next operation */
    558  1.20    bouyer 			_wdc_ata_bio_start(chp, xfer);
    559   1.2    bouyer 		} else {
    560  1.20    bouyer 			/* Let _wdc_ata_bio_start do the loop */
    561   1.2    bouyer 			return 1;
    562   1.2    bouyer 		}
    563   1.2    bouyer 	} else { /* Done with this transfer */
    564   1.2    bouyer 		ata_bio->error = NOERROR;
    565   1.2    bouyer 		wdc_ata_bio_done(chp, xfer);
    566   1.2    bouyer 	}
    567   1.2    bouyer 	return 1;
    568   1.2    bouyer }
    569   1.2    bouyer 
    570   1.2    bouyer void
    571   1.2    bouyer wdc_ata_bio_done(chp, xfer)
    572   1.2    bouyer 	struct channel_softc *chp;
    573   1.2    bouyer 	struct wdc_xfer *xfer;
    574   1.2    bouyer {
    575   1.2    bouyer 	struct ata_bio *ata_bio = xfer->cmd;
    576   1.2    bouyer 	int drive = xfer->drive;
    577  1.10    bouyer 	struct ata_drive_datas *drvp = &chp->ch_drive[drive];
    578   1.2    bouyer 
    579   1.5    bouyer 	WDCDEBUG_PRINT(("wdc_ata_bio_done %s:%d:%d: flags 0x%x\n",
    580   1.5    bouyer 	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
    581   1.5    bouyer 	    (u_int)xfer->c_flags),
    582   1.4    bouyer 	    DEBUG_XFERS);
    583  1.10    bouyer 
    584  1.20    bouyer 	untimeout(wdctimeout, chp);
    585  1.10    bouyer 	if (ata_bio->error == NOERROR)
    586  1.10    bouyer 		drvp->n_dmaerrs = 0;
    587  1.10    bouyer 	else if (drvp->n_dmaerrs >= NERRS_MAX) {
    588  1.10    bouyer 		wdc_downgrade_mode(drvp);
    589  1.10    bouyer 	}
    590   1.2    bouyer 
    591   1.2    bouyer 	/* feed back residual bcount to our caller */
    592   1.2    bouyer 	ata_bio->bcount = xfer->c_bcount;
    593   1.2    bouyer 
    594   1.2    bouyer 	/* remove this command from xfer queue */
    595   1.2    bouyer 	wdc_free_xfer(chp, xfer);
    596   1.2    bouyer 
    597   1.2    bouyer 	ata_bio->flags |= ATA_ITSDONE;
    598  1.21    bouyer 	if ((ata_bio->flags & ATA_POLL) == 0) {
    599   1.4    bouyer 		WDCDEBUG_PRINT(("wdc_ata_done: wddone\n"), DEBUG_XFERS);
    600   1.2    bouyer 		wddone(chp->ch_drive[drive].drv_softc);
    601   1.2    bouyer 	}
    602   1.2    bouyer 	WDCDEBUG_PRINT(("wdcstart from wdc_ata_done, flags 0x%x\n",
    603   1.4    bouyer 	    chp->ch_flags), DEBUG_XFERS);
    604   1.9  drochner 	wdcstart(chp);
    605   1.2    bouyer }
    606   1.2    bouyer 
    607   1.2    bouyer /*
    608   1.2    bouyer  * Implement operations needed before read/write.
    609   1.2    bouyer  */
    610   1.2    bouyer int
    611  1.19    bouyer wdc_ata_ctrl_intr(chp, xfer, irq)
    612   1.2    bouyer 	struct channel_softc *chp;
    613   1.2    bouyer 	struct wdc_xfer *xfer;
    614  1.19    bouyer 	int irq;
    615   1.2    bouyer {
    616   1.2    bouyer 	struct ata_bio *ata_bio = xfer->cmd;
    617   1.2    bouyer 	struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
    618   1.2    bouyer 	char *errstring = NULL;
    619  1.19    bouyer 	int delay = (irq == 0) ? ATA_DELAY : 0;
    620  1.18    bouyer 
    621   1.2    bouyer 	WDCDEBUG_PRINT(("wdc_ata_ctrl_intr: state %d\n", drvp->state),
    622  1.18    bouyer 	    DEBUG_FUNCS);
    623   1.2    bouyer 
    624   1.2    bouyer again:
    625   1.2    bouyer 	switch (drvp->state) {
    626   1.2    bouyer 	case RECAL:    /* Should not be in this state here */
    627   1.2    bouyer 		panic("wdc_ata_ctrl_intr: state==RECAL");
    628   1.2    bouyer 		break;
    629   1.2    bouyer 
    630   1.2    bouyer 	case RECAL_WAIT:
    631   1.2    bouyer 		errstring = "recal";
    632  1.18    bouyer 		if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, delay))
    633   1.2    bouyer 			goto timeout;
    634   1.2    bouyer 		if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
    635   1.2    bouyer 			goto error;
    636   1.2    bouyer 	/* fall through */
    637   1.2    bouyer 
    638   1.2    bouyer 	case PIOMODE:
    639   1.2    bouyer 		/* Don't try to set modes if controller can't be adjusted */
    640   1.2    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_MODE) == 0)
    641   1.6    bouyer 			goto geometry;
    642   1.6    bouyer 		/* Also don't try if the drive didn't report its mode */
    643   1.6    bouyer 		if ((drvp->drive_flags & DRIVE_MODE) == 0)
    644   1.2    bouyer 			goto geometry;
    645   1.2    bouyer 		wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
    646   1.2    bouyer 		    0x08 | drvp->PIO_mode, WDSF_SET_MODE);
    647   1.2    bouyer 		drvp->state = PIOMODE_WAIT;
    648   1.2    bouyer 		break;
    649   1.2    bouyer 
    650   1.2    bouyer 	case PIOMODE_WAIT:
    651   1.2    bouyer 		errstring = "piomode";
    652  1.18    bouyer 		if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, delay))
    653   1.2    bouyer 			goto timeout;
    654   1.2    bouyer 		if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
    655   1.2    bouyer 			goto error;
    656   1.2    bouyer 	/* fall through */
    657   1.2    bouyer 
    658   1.2    bouyer 	case DMAMODE:
    659   1.2    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
    660   1.2    bouyer 			wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
    661   1.2    bouyer 			    0x40 | drvp->UDMA_mode, WDSF_SET_MODE);
    662   1.2    bouyer 		} else if (drvp->drive_flags & DRIVE_DMA) {
    663   1.2    bouyer 			wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
    664   1.2    bouyer 			    0x20 | drvp->DMA_mode, WDSF_SET_MODE);
    665   1.2    bouyer 		} else {
    666   1.2    bouyer 			goto geometry;
    667   1.2    bouyer 		}
    668   1.2    bouyer 		drvp->state = DMAMODE_WAIT;
    669   1.2    bouyer 		break;
    670   1.2    bouyer 	case DMAMODE_WAIT:
    671   1.2    bouyer 		errstring = "dmamode";
    672  1.18    bouyer 		if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, delay))
    673   1.2    bouyer 			goto timeout;
    674   1.2    bouyer 		if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
    675   1.2    bouyer 			goto error;
    676   1.2    bouyer 	/* fall through */
    677   1.2    bouyer 
    678   1.2    bouyer 	case GEOMETRY:
    679   1.2    bouyer 	geometry:
    680   1.2    bouyer 		if (ata_bio->flags & ATA_LBA)
    681   1.2    bouyer 			goto multimode;
    682   1.2    bouyer 		wdccommand(chp, xfer->drive, WDCC_IDP,
    683   1.2    bouyer 		    ata_bio->lp->d_ncylinders,
    684   1.2    bouyer 		    ata_bio->lp->d_ntracks - 1, 0, ata_bio->lp->d_nsectors,
    685   1.2    bouyer 		    (ata_bio->lp->d_type == DTYPE_ST506) ?
    686   1.2    bouyer 			ata_bio->lp->d_precompcyl / 4 : 0);
    687   1.2    bouyer 		drvp->state = GEOMETRY_WAIT;
    688   1.2    bouyer 		break;
    689   1.2    bouyer 
    690   1.2    bouyer 	case GEOMETRY_WAIT:
    691   1.2    bouyer 		errstring = "geometry";
    692  1.18    bouyer 		if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, delay))
    693   1.2    bouyer 			goto timeout;
    694   1.2    bouyer 		if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
    695   1.2    bouyer 			goto error;
    696   1.2    bouyer 		/* fall through */
    697   1.2    bouyer 
    698   1.2    bouyer 	case MULTIMODE:
    699   1.2    bouyer 	multimode:
    700   1.2    bouyer 		if (ata_bio->multi == 1)
    701   1.2    bouyer 			goto ready;
    702   1.2    bouyer 		wdccommand(chp, xfer->drive, WDCC_SETMULTI, 0, 0, 0,
    703   1.2    bouyer 		    ata_bio->multi, 0);
    704   1.2    bouyer 		drvp->state = MULTIMODE_WAIT;
    705   1.2    bouyer 		break;
    706   1.2    bouyer 
    707   1.2    bouyer 	case MULTIMODE_WAIT:
    708   1.2    bouyer 		errstring = "setmulti";
    709  1.18    bouyer 		if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, delay))
    710   1.2    bouyer 			goto timeout;
    711   1.2    bouyer 		if (chp->ch_status & (WDCS_ERR | WDCS_DWF))
    712   1.2    bouyer 			goto error;
    713   1.2    bouyer 		/* fall through */
    714   1.2    bouyer 
    715   1.2    bouyer 	case READY:
    716   1.2    bouyer 	ready:
    717   1.2    bouyer 		drvp->state = READY;
    718   1.2    bouyer 		/*
    719   1.2    bouyer 		 * The drive is usable now
    720   1.2    bouyer 		 */
    721   1.2    bouyer 		xfer->c_intr = wdc_ata_bio_intr;
    722  1.20    bouyer 		_wdc_ata_bio_start(chp, xfer);
    723   1.2    bouyer 		return 1;
    724   1.2    bouyer 	}
    725   1.2    bouyer 
    726   1.2    bouyer 	if ((ata_bio->flags & ATA_POLL) == 0) {
    727   1.2    bouyer 		chp->ch_flags |= WDCF_IRQ_WAIT;
    728   1.2    bouyer 	} else {
    729   1.2    bouyer 		goto again;
    730   1.2    bouyer 	}
    731   1.2    bouyer 	return 1;
    732   1.2    bouyer 
    733   1.2    bouyer timeout:
    734  1.19    bouyer 	if (irq && (xfer->c_flags & C_TIMEOU) == 0) {
    735   1.2    bouyer 		return 0; /* IRQ was not for us */
    736   1.2    bouyer 	}
    737   1.2    bouyer 	printf("%s:%d:%d: %s timed out\n",
    738   1.2    bouyer 	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive, errstring);
    739   1.2    bouyer 	ata_bio->error = TIMEOUT;
    740   1.2    bouyer 	drvp->state = 0;
    741   1.2    bouyer 	wdc_ata_bio_done(chp, xfer);
    742   1.2    bouyer 	return 0;
    743   1.2    bouyer error:
    744   1.2    bouyer 	printf("%s:%d:%d: %s ",
    745   1.2    bouyer 	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
    746   1.2    bouyer 	    errstring);
    747   1.2    bouyer 	if (chp->ch_status & WDCS_DWF) {
    748   1.2    bouyer 		printf("drive fault\n");
    749   1.2    bouyer 		ata_bio->error = ERR_DF;
    750   1.2    bouyer 	} else {
    751   1.2    bouyer 		printf("error (%x)\n", chp->ch_error);
    752   1.2    bouyer 		ata_bio->r_error = chp->ch_error;
    753   1.2    bouyer 		ata_bio->error = ERROR;
    754   1.2    bouyer 	}
    755   1.2    bouyer 	drvp->state = 0;
    756   1.2    bouyer 	wdc_ata_bio_done(chp, xfer);
    757   1.2    bouyer 	return 1;
    758   1.2    bouyer }
    759   1.2    bouyer 
    760   1.2    bouyer int
    761  1.16    bouyer wdc_ata_err(drvp, ata_bio)
    762  1.16    bouyer 	struct ata_drive_datas *drvp;
    763   1.2    bouyer 	struct ata_bio *ata_bio;
    764   1.2    bouyer {
    765  1.16    bouyer 	struct channel_softc *chp = drvp->chnl_softc;
    766   1.2    bouyer 	ata_bio->error = 0;
    767   1.2    bouyer 	if (chp->ch_status & WDCS_BSY) {
    768   1.2    bouyer 		ata_bio->error = TIMEOUT;
    769   1.2    bouyer 		return WDC_ATA_ERR;
    770   1.2    bouyer 	}
    771   1.2    bouyer 
    772   1.2    bouyer 	if (chp->ch_status & WDCS_DWF) {
    773   1.2    bouyer 		ata_bio->error = ERR_DF;
    774   1.2    bouyer 		return WDC_ATA_ERR;
    775   1.2    bouyer 	}
    776   1.2    bouyer 
    777   1.2    bouyer 	if (chp->ch_status & WDCS_ERR) {
    778   1.2    bouyer 		ata_bio->error = ERROR;
    779   1.2    bouyer 		ata_bio->r_error = chp->ch_error;
    780  1.16    bouyer 		if (drvp->drive_flags & DRIVE_UDMA &&
    781  1.16    bouyer 		    (ata_bio->r_error & WDCE_CRC)) {
    782  1.16    bouyer 			/*
    783  1.16    bouyer 			 * Record the CRC error, to avoid downgrading to
    784  1.16    bouyer 			 * multiword DMA
    785  1.16    bouyer 			 */
    786  1.16    bouyer 			drvp->drive_flags |= DRIVE_DMAERR;
    787  1.16    bouyer 		}
    788   1.2    bouyer 		if (ata_bio->r_error & (WDCE_BBK | WDCE_UNC | WDCE_IDNF |
    789   1.2    bouyer 		    WDCE_ABRT | WDCE_TK0NF | WDCE_AMNF))
    790   1.2    bouyer 			return WDC_ATA_ERR;
    791   1.2    bouyer 		return WDC_ATA_NOERR;
    792   1.2    bouyer 	}
    793   1.2    bouyer 
    794   1.2    bouyer 	if (chp->ch_status & WDCS_CORR)
    795   1.2    bouyer 		ata_bio->flags |= ATA_CORR;
    796   1.2    bouyer 	return WDC_ATA_NOERR;
    797   1.8   thorpej }
    798   1.8   thorpej 
    799   1.8   thorpej int
    800   1.8   thorpej wdc_ata_addref(drvp)
    801   1.8   thorpej 	struct ata_drive_datas *drvp;
    802   1.8   thorpej {
    803   1.8   thorpej 	struct channel_softc *chp = drvp->chnl_softc;
    804   1.8   thorpej 
    805   1.8   thorpej 	return (wdc_addref(chp));
    806   1.8   thorpej }
    807   1.8   thorpej 
    808   1.8   thorpej void
    809   1.8   thorpej wdc_ata_delref(drvp)
    810   1.8   thorpej 	struct ata_drive_datas *drvp;
    811   1.8   thorpej {
    812   1.8   thorpej 	struct channel_softc *chp = drvp->chnl_softc;
    813   1.8   thorpej 
    814   1.8   thorpej 	wdc_delref(chp);
    815   1.2    bouyer }
    816