atavar.h revision 1.8
1 /* $NetBSD: atavar.h,v 1.8 1998/12/04 11:17:54 bouyer Exp $ */ 2 3 /* 4 * Copyright (c) 1998 Manuel Bouyer. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by the University of 17 * California, Berkeley and its contributors. 18 * 4. Neither the name of the University nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 */ 35 36 /* Hight-level functions and structures used by both ATA and ATAPI devices */ 37 38 /* Datas common to drives and controller drivers */ 39 struct ata_drive_datas { 40 u_int8_t drive; /* drive number */ 41 u_int16_t drive_flags; /* bitmask for drives present/absent and cap */ 42 #define DRIVE_ATA 0x01 43 #define DRIVE_ATAPI 0x02 44 #define DRIVE (DRIVE_ATA|DRIVE_ATAPI) 45 #define DRIVE_CAP32 0x04 46 #define DRIVE_DMA 0x08 47 #define DRIVE_UDMA 0x10 48 #define DRIVE_MODE 0x20 /* the drive reported its mode */ 49 #define DRIVE_RESET 0x40 /* reset the drive state at next xfer */ 50 /* 51 * Current setting of drive's PIO, DMA and UDMA modes. 52 * Is initialised by the disks drivers at attach time, and may be 53 * changed later by the controller's code if needed 54 */ 55 u_int8_t PIO_mode; /* Current setting of drive's PIO mode */ 56 u_int8_t DMA_mode; /* Current setting of drive's DMA mode */ 57 u_int8_t UDMA_mode; /* Current setting of drive's UDMA mode */ 58 /* Supported modes for this drive */ 59 u_int8_t PIO_cap; /* supported drive's PIO mode */ 60 u_int8_t DMA_cap; /* supported drive's DMA mode */ 61 u_int8_t UDMA_cap; /* supported drive's UDMA mode */ 62 /* 63 * Drive state. This is drive-type (ATA or ATAPI) dependant 64 * This is reset to 0 after a channel reset. 65 */ 66 u_int8_t state; 67 68 struct device *drv_softc; /* ATA drives softc, if any */ 69 void* chnl_softc; /* channel softc */ 70 }; 71 72 /* ATA/ATAPI common attachement datas */ 73 struct ata_atapi_attach { 74 u_int8_t aa_type; /* Type of device */ 75 #define T_ATA 0 76 #define T_ATAPI 1 77 u_int8_t aa_channel; /* controller's channel */ 78 u_int8_t aa_openings; /* Number of simultaneous commands possible */ 79 struct ata_drive_datas *aa_drv_data; 80 void *aa_bus_private; /* infos specifics to this bus */ 81 }; 82 83 /* User config flags that force (or disable) the use of a mode */ 84 #define ATA_CONFIG_PIO_MODES 0x0007 85 #define ATA_CONFIG_PIO_SET 0x0008 86 #define ATA_CONFIG_PIO_OFF 0 87 #define ATA_CONFIG_DMA_MODES 0x0070 88 #define ATA_CONFIG_DMA_SET 0x0080 89 #define ATA_CONFIG_DMA_DISABLE 0x0070 90 #define ATA_CONFIG_DMA_OFF 4 91 #define ATA_CONFIG_UDMA_MODES 0x0700 92 #define ATA_CONFIG_UDMA_SET 0x0800 93 #define ATA_CONFIG_UDMA_DISABLE 0x0700 94 #define ATA_CONFIG_UDMA_OFF 8 95 96 /* 97 * ATA/ATAPI commands description 98 * 99 * This structure defines the interface between the ATA/ATAPI device driver 100 * and the controller for short commands. It contains the command's parameter, 101 * the len of data's to read/write (if any), and a function to call upon 102 * completion. 103 * If no sleep is allowed, the driver can poll for command completion. 104 * Once the command completed, if the error registed is valid, the flag 105 * AT_ERROR is set and the error register value is copied to r_error . 106 * A separate interface is needed for read/write or ATAPI packet commands 107 * (which need multiple interrupts per commands). 108 */ 109 struct wdc_command { 110 u_int8_t r_command; /* Parameters to upload to registers */ 111 u_int8_t r_head; 112 u_int16_t r_cyl; 113 u_int8_t r_sector; 114 u_int8_t r_count; 115 u_int8_t r_precomp; 116 u_int8_t r_st_bmask; /* status register mask to wait for before command */ 117 u_int8_t r_st_pmask; /* status register mask to wait for after command */ 118 u_int8_t r_error; /* error register after command done */ 119 volatile u_int16_t flags; 120 #define AT_READ 0x0001 /* There is data to read */ 121 #define AT_WRITE 0x0002 /* There is data to write (excl. with AT_READ) */ 122 #define AT_WAIT 0x0008 /* wait in controller code for command completion */ 123 #define AT_POLL 0x0010 /* poll for command completion (no interrupts) */ 124 #define AT_DONE 0x0020 /* command is done */ 125 #define AT_ERROR 0x0040 /* command is done with error */ 126 #define AT_TIMEOU 0x0080 /* command timed out */ 127 #define AT_DF 0x0100 /* Drive fault */ 128 #define AT_READREG 0x0200 /* Read registers on completion */ 129 int timeout; /* timeout (in ms) */ 130 void *data; /* Data buffer address */ 131 int bcount; /* number of bytes to transfer */ 132 void (*callback) __P((void*)); /* command to call once command completed */ 133 void *callback_arg; /* argument passed to *callback() */ 134 }; 135 136 int wdc_exec_command __P((struct ata_drive_datas *, struct wdc_command*)); 137 #define WDC_COMPLETE 0x01 138 #define WDC_QUEUED 0x02 139 #define WDC_TRY_AGAIN 0x03 140 141 void wdc_probe_caps __P((struct ata_drive_datas*)); 142 143 void wdc_reset_channel __P((struct ata_drive_datas *)); 144 145 int wdc_ata_addref __P((struct ata_drive_datas *)); 146 void wdc_ata_delref __P((struct ata_drive_datas *)); 147 148 struct ataparams; 149 int ata_get_params __P((struct ata_drive_datas*, u_int8_t, 150 struct ataparams *)); 151 int ata_set_mode __P((struct ata_drive_datas*, u_int8_t, u_int8_t)); 152 /* return code for these cmds */ 153 #define CMD_OK 0 154 #define CMD_ERR 1 155 #define CMD_AGAIN 2 156
Indexes created Mon Sep 29 21:09:56 GMT 2025