satapmp_subr.c revision 1.10.2.1 1 1.10.2.1 tls /* $NetBSD: satapmp_subr.c,v 1.10.2.1 2013/06/23 06:20:16 tls Exp $ */
2 1.1 bouyer
3 1.1 bouyer /*
4 1.1 bouyer * Copyright (c) 2012 Manuel Bouyer. All rights reserved.
5 1.1 bouyer *
6 1.1 bouyer * Redistribution and use in source and binary forms, with or without
7 1.1 bouyer * modification, are permitted provided that the following conditions
8 1.1 bouyer * are met:
9 1.1 bouyer * 1. Redistributions of source code must retain the above copyright
10 1.1 bouyer * notice, this list of conditions and the following disclaimer.
11 1.1 bouyer * 2. Redistributions in binary form must reproduce the above copyright
12 1.1 bouyer * notice, this list of conditions and the following disclaimer in the
13 1.1 bouyer * documentation and/or other materials provided with the distribution.
14 1.1 bouyer *
15 1.1 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 1.1 bouyer * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 1.1 bouyer * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 1.1 bouyer * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 1.1 bouyer * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 1.1 bouyer * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 1.1 bouyer * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 1.1 bouyer * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 1.1 bouyer * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 1.1 bouyer * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 1.1 bouyer */
26 1.1 bouyer
27 1.1 bouyer #include <sys/cdefs.h>
28 1.10.2.1 tls __KERNEL_RCSID(0, "$NetBSD: satapmp_subr.c,v 1.10.2.1 2013/06/23 06:20:16 tls Exp $");
29 1.1 bouyer
30 1.1 bouyer #include <sys/param.h>
31 1.1 bouyer #include <sys/systm.h>
32 1.1 bouyer #include <sys/kernel.h>
33 1.1 bouyer #include <sys/device.h>
34 1.1 bouyer #include <sys/conf.h>
35 1.1 bouyer #include <sys/fcntl.h>
36 1.1 bouyer #include <sys/proc.h>
37 1.1 bouyer #include <sys/errno.h>
38 1.1 bouyer #include <sys/kmem.h>
39 1.1 bouyer #include <sys/intr.h>
40 1.1 bouyer
41 1.1 bouyer #include <dev/ata/ataconf.h>
42 1.1 bouyer #include <dev/ata/atareg.h>
43 1.1 bouyer #include <dev/ata/atavar.h>
44 1.1 bouyer
45 1.1 bouyer #include <dev/ata/satapmpvar.h>
46 1.1 bouyer #include <dev/ata/satapmpreg.h>
47 1.1 bouyer #include <dev/ata/satavar.h>
48 1.1 bouyer #include <dev/ata/satareg.h>
49 1.1 bouyer
50 1.1 bouyer static int
51 1.6 jakllsch satapmp_read_8(struct ata_channel *chp, int port, int reg, uint64_t *value)
52 1.1 bouyer {
53 1.1 bouyer struct ata_command ata_c;
54 1.1 bouyer struct atac_softc *atac = chp->ch_atac;
55 1.1 bouyer struct ata_drive_datas *drvp;
56 1.1 bouyer
57 1.3 jakllsch KASSERT(port < PMP_MAX_DRIVES);
58 1.1 bouyer KASSERT(reg < PMP_GSCR_NREGS);
59 1.1 bouyer KASSERT(chp->ch_ndrives >= PMP_MAX_DRIVES);
60 1.1 bouyer drvp = &chp->ch_drive[PMP_PORT_CTL];
61 1.1 bouyer KASSERT(drvp->drive == PMP_PORT_CTL);
62 1.1 bouyer
63 1.1 bouyer memset(&ata_c, 0, sizeof(struct ata_command));
64 1.1 bouyer
65 1.1 bouyer ata_c.r_command = PMPC_READ_PORT;
66 1.1 bouyer ata_c.r_features = reg;
67 1.4 jakllsch ata_c.r_device = port;
68 1.1 bouyer ata_c.timeout = 3000; /* 3s */
69 1.10.2.1 tls ata_c.r_st_bmask = 0;
70 1.10.2.1 tls ata_c.r_st_pmask = WDCS_DRDY;
71 1.4 jakllsch ata_c.flags = AT_LBA48 | AT_READREG | AT_WAIT;
72 1.1 bouyer
73 1.1 bouyer if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
74 1.1 bouyer &ata_c) != ATACMD_COMPLETE) {
75 1.1 bouyer aprint_error_dev(chp->atabus,
76 1.10.2.1 tls "PMP port %d register %d read failed\n", port, reg);
77 1.1 bouyer return EIO;
78 1.1 bouyer }
79 1.1 bouyer if (ata_c.flags & (AT_TIMEOU | AT_DF)) {
80 1.1 bouyer aprint_error_dev(chp->atabus,
81 1.10.2.1 tls "PMP port %d register %d read failed, flags 0x%x\n",
82 1.10.2.1 tls port, reg, ata_c.flags);
83 1.1 bouyer return EIO;
84 1.1 bouyer }
85 1.1 bouyer if (ata_c.flags & AT_ERROR) {
86 1.1 bouyer aprint_verbose_dev(chp->atabus,
87 1.10.2.1 tls "PMP port %d register %d read failed, error 0x%x\n",
88 1.10.2.1 tls port, reg, ata_c.r_error);
89 1.1 bouyer return EIO;
90 1.1 bouyer }
91 1.6 jakllsch
92 1.6 jakllsch *value = ((uint64_t)((ata_c.r_lba >> 24) & 0xffffff) << 40) |
93 1.6 jakllsch ((uint64_t)((ata_c.r_count >> 8) & 0xff) << 32) |
94 1.6 jakllsch ((uint64_t)((ata_c.r_lba >> 0) & 0xffffff) << 8) |
95 1.6 jakllsch ((uint64_t)((ata_c.r_count >> 0) & 0xff) << 0);
96 1.6 jakllsch
97 1.1 bouyer return 0;
98 1.1 bouyer }
99 1.1 bouyer
100 1.6 jakllsch static inline int
101 1.6 jakllsch satapmp_read(struct ata_channel *chp, int port, int reg, uint32_t *value)
102 1.6 jakllsch {
103 1.6 jakllsch uint64_t value64;
104 1.6 jakllsch int ret;
105 1.6 jakllsch
106 1.6 jakllsch ret = satapmp_read_8(chp, port, reg, &value64);
107 1.6 jakllsch if (ret)
108 1.6 jakllsch return ret;
109 1.6 jakllsch
110 1.6 jakllsch *value = value64 & 0xffffffff;
111 1.6 jakllsch return ret;
112 1.6 jakllsch }
113 1.6 jakllsch
114 1.1 bouyer static int
115 1.6 jakllsch satapmp_write_8(struct ata_channel *chp, int port, int reg, uint64_t value)
116 1.1 bouyer {
117 1.1 bouyer struct ata_command ata_c;
118 1.1 bouyer struct atac_softc *atac = chp->ch_atac;
119 1.1 bouyer struct ata_drive_datas *drvp;
120 1.1 bouyer
121 1.3 jakllsch KASSERT(port < PMP_MAX_DRIVES);
122 1.1 bouyer KASSERT(reg < PMP_GSCR_NREGS);
123 1.1 bouyer KASSERT(chp->ch_ndrives >= PMP_MAX_DRIVES);
124 1.1 bouyer drvp = &chp->ch_drive[PMP_PORT_CTL];
125 1.1 bouyer KASSERT(drvp->drive == PMP_PORT_CTL);
126 1.1 bouyer
127 1.1 bouyer memset(&ata_c, 0, sizeof(struct ata_command));
128 1.1 bouyer
129 1.1 bouyer ata_c.r_command = PMPC_WRITE_PORT;
130 1.1 bouyer ata_c.r_features = reg;
131 1.4 jakllsch ata_c.r_device = port;
132 1.6 jakllsch ata_c.r_lba = (((value >> 40) & 0xffffff) << 24) |
133 1.6 jakllsch (((value >> 8) & 0xffffff) << 0);
134 1.6 jakllsch ata_c.r_count = (((value >> 32) & 0xff) << 8) |
135 1.6 jakllsch (((value >> 0) & 0xff) << 0);
136 1.1 bouyer ata_c.timeout = 3000; /* 3s */
137 1.10.2.1 tls ata_c.r_st_bmask = 0;
138 1.10.2.1 tls ata_c.r_st_pmask = WDCS_DRDY;
139 1.4 jakllsch ata_c.flags = AT_LBA48 | AT_WAIT;
140 1.1 bouyer
141 1.1 bouyer if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
142 1.1 bouyer &ata_c) != ATACMD_COMPLETE) {
143 1.1 bouyer aprint_error_dev(chp->atabus,
144 1.10.2.1 tls "PMP port %d register %d write failed\n", port, reg);
145 1.1 bouyer return EIO;
146 1.1 bouyer }
147 1.1 bouyer if (ata_c.flags & (AT_TIMEOU | AT_DF)) {
148 1.1 bouyer aprint_error_dev(chp->atabus,
149 1.10.2.1 tls "PMP port %d register %d write failed, flags 0x%x\n",
150 1.10.2.1 tls port, reg, ata_c.flags);
151 1.1 bouyer return EIO;
152 1.1 bouyer }
153 1.1 bouyer if (ata_c.flags & AT_ERROR) {
154 1.1 bouyer aprint_verbose_dev(chp->atabus,
155 1.10.2.1 tls "PMP port %d register %d write failed, error 0x%x\n",
156 1.10.2.1 tls port, reg, ata_c.r_error);
157 1.1 bouyer return EIO;
158 1.1 bouyer }
159 1.1 bouyer return 0;
160 1.1 bouyer }
161 1.1 bouyer
162 1.6 jakllsch static inline int
163 1.6 jakllsch satapmp_write(struct ata_channel *chp, int port, int reg, uint32_t value)
164 1.6 jakllsch {
165 1.6 jakllsch return satapmp_write_8(chp, port, reg, value);
166 1.6 jakllsch }
167 1.6 jakllsch
168 1.1 bouyer /*
169 1.1 bouyer * Reset one port's PHY and bring it online
170 1.1 bouyer * XXX duplicate of sata_reset_interface()
171 1.1 bouyer */
172 1.1 bouyer static uint32_t
173 1.1 bouyer satapmp_reset_device_port(struct ata_channel *chp, int port)
174 1.1 bouyer {
175 1.1 bouyer uint32_t scontrol, sstatus;
176 1.1 bouyer int i;
177 1.1 bouyer
178 1.1 bouyer /* bring the PHY online */
179 1.1 bouyer scontrol = SControl_IPM_NONE | SControl_SPD_ANY | SControl_DET_INIT;
180 1.1 bouyer if (satapmp_write(chp, port, PMP_PSCR_SControl, scontrol) != 0)
181 1.1 bouyer return 0;
182 1.1 bouyer
183 1.1 bouyer tsleep(chp, PRIBIO, "sataup", mstohz(50));
184 1.1 bouyer scontrol &= ~SControl_DET_INIT;
185 1.1 bouyer if (satapmp_write(chp, port, PMP_PSCR_SControl, scontrol) != 0)
186 1.1 bouyer return 0;
187 1.1 bouyer tsleep(chp, PRIBIO, "sataup", mstohz(50));
188 1.1 bouyer
189 1.1 bouyer /* wait up to 1s for device to come up */
190 1.1 bouyer for (i = 0; i < 100; i++) {
191 1.1 bouyer
192 1.1 bouyer if (satapmp_read(chp, port, PMP_PSCR_SStatus, &sstatus) != 0)
193 1.1 bouyer return 0;
194 1.1 bouyer if ((sstatus & SStatus_DET_mask) == SStatus_DET_DEV)
195 1.1 bouyer break;
196 1.1 bouyer tsleep(chp, PRIBIO, "sataup", mstohz(10));
197 1.1 bouyer }
198 1.1 bouyer
199 1.1 bouyer switch (sstatus & SStatus_DET_mask) {
200 1.1 bouyer case SStatus_DET_NODEV:
201 1.1 bouyer /* No Device; be silent. */
202 1.1 bouyer break;
203 1.1 bouyer case SStatus_DET_DEV_NE:
204 1.1 bouyer aprint_error("%s PMP port %d: device connected, but "
205 1.1 bouyer "communication not established\n",
206 1.1 bouyer device_xname(chp->atabus), port);
207 1.1 bouyer break;
208 1.1 bouyer case SStatus_DET_OFFLINE:
209 1.1 bouyer aprint_error("%s PMP port %d: PHY offline\n",
210 1.1 bouyer device_xname(chp->atabus), port);
211 1.1 bouyer break;
212 1.1 bouyer case SStatus_DET_DEV:
213 1.1 bouyer aprint_normal("%s PMP port %d: device present, speed: %s\n",
214 1.1 bouyer device_xname(chp->atabus), port, sata_speed(sstatus));
215 1.1 bouyer break;
216 1.1 bouyer default:
217 1.1 bouyer aprint_error("%s PMP port %d: unknown SStatus: 0x%08x\n",
218 1.1 bouyer device_xname(chp->atabus), port, sstatus);
219 1.1 bouyer }
220 1.1 bouyer return(sstatus & SStatus_DET_mask);
221 1.1 bouyer }
222 1.1 bouyer
223 1.1 bouyer void
224 1.1 bouyer satapmp_rescan(struct ata_channel *chp) {
225 1.1 bouyer int i;
226 1.1 bouyer uint32_t sig;
227 1.1 bouyer
228 1.1 bouyer KASSERT(chp->ch_satapmp_nports <= PMP_PORT_CTL);
229 1.1 bouyer KASSERT(chp->ch_satapmp_nports <= chp->ch_ndrives);
230 1.1 bouyer
231 1.1 bouyer for (i = 0; i < chp->ch_satapmp_nports; i++) {
232 1.10 bouyer if (chp->ch_drive[i].drive_type != ATA_DRIVET_NONE ||
233 1.1 bouyer satapmp_reset_device_port(chp, i) != SStatus_DET_DEV) {
234 1.1 bouyer continue;
235 1.1 bouyer }
236 1.1 bouyer if (satapmp_write(chp, i, PMP_PSCR_SError, 0xffffffff) != 0) {
237 1.1 bouyer aprint_error("%s PMP port %d: can't write SError\n",
238 1.1 bouyer device_xname(chp->atabus), i);
239 1.1 bouyer continue;
240 1.1 bouyer }
241 1.1 bouyer chp->ch_atac->atac_bustype_ata->ata_reset_drive(
242 1.1 bouyer &chp->ch_drive[i], AT_WAIT, &sig);
243 1.1 bouyer
244 1.1 bouyer sata_interpret_sig(chp, i, sig);
245 1.1 bouyer }
246 1.1 bouyer }
247 1.1 bouyer
248 1.1 bouyer void
249 1.1 bouyer satapmp_attach(struct ata_channel *chp)
250 1.1 bouyer {
251 1.1 bouyer uint32_t id, rev, inf;
252 1.1 bouyer
253 1.1 bouyer if (satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_ID, &id) != 0 ||
254 1.1 bouyer satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_REV, &rev) != 0 ||
255 1.1 bouyer satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_INF, &inf) != 0) {
256 1.1 bouyer aprint_normal_dev(chp->atabus, "can't read PMP registers\n");
257 1.1 bouyer return;
258 1.1 bouyer }
259 1.1 bouyer
260 1.1 bouyer aprint_normal_dev(chp->atabus,
261 1.1 bouyer "SATA port multiplier, %d ports\n", PMP_INF_NPORTS(inf));
262 1.1 bouyer aprint_verbose_dev(chp->atabus,
263 1.5 jakllsch "vendor 0x%04x, product 0x%04x",
264 1.1 bouyer PMP_ID_VEND(id), PMP_ID_DEV(id));
265 1.1 bouyer if (rev & PMP_REV_SPEC_11) {
266 1.1 bouyer aprint_verbose(", revision 1.1");
267 1.1 bouyer } else if (rev & PMP_REV_SPEC_10) {
268 1.1 bouyer aprint_verbose(", revision 1.0");
269 1.1 bouyer } else {
270 1.1 bouyer aprint_verbose(", unknown revision 0x%x", rev & 0x0f);
271 1.1 bouyer }
272 1.1 bouyer aprint_verbose(", level %d\n", PMP_REV_LEVEL(rev));
273 1.1 bouyer
274 1.1 bouyer chp->ch_satapmp_nports = PMP_INF_NPORTS(inf);
275 1.1 bouyer
276 1.1 bouyer /* reset and bring up PHYs */
277 1.1 bouyer satapmp_rescan(chp);
278 1.1 bouyer }
279