Home | History | Annotate | Line # | Download | only in ata
satapmp_subr.c revision 1.12.24.2
      1  1.12.24.2  jdolecek /*	$NetBSD: satapmp_subr.c,v 1.12.24.2 2017/06/17 14:01:36 jdolecek Exp $	*/
      2        1.1    bouyer 
      3        1.1    bouyer /*
      4        1.1    bouyer  * Copyright (c) 2012 Manuel Bouyer.  All rights reserved.
      5        1.1    bouyer  *
      6        1.1    bouyer  * Redistribution and use in source and binary forms, with or without
      7        1.1    bouyer  * modification, are permitted provided that the following conditions
      8        1.1    bouyer  * are met:
      9        1.1    bouyer  * 1. Redistributions of source code must retain the above copyright
     10        1.1    bouyer  *    notice, this list of conditions and the following disclaimer.
     11        1.1    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     12        1.1    bouyer  *    notice, this list of conditions and the following disclaimer in the
     13        1.1    bouyer  *    documentation and/or other materials provided with the distribution.
     14        1.1    bouyer  *
     15        1.1    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     16        1.1    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     17        1.1    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     18        1.1    bouyer  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     19        1.1    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     20        1.1    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     21        1.1    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     22        1.1    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     23        1.1    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     24        1.1    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     25        1.1    bouyer  */
     26        1.1    bouyer 
     27        1.1    bouyer #include <sys/cdefs.h>
     28  1.12.24.2  jdolecek __KERNEL_RCSID(0, "$NetBSD: satapmp_subr.c,v 1.12.24.2 2017/06/17 14:01:36 jdolecek Exp $");
     29        1.1    bouyer 
     30        1.1    bouyer #include <sys/param.h>
     31        1.1    bouyer #include <sys/systm.h>
     32        1.1    bouyer #include <sys/kernel.h>
     33        1.1    bouyer #include <sys/device.h>
     34        1.1    bouyer #include <sys/conf.h>
     35        1.1    bouyer #include <sys/fcntl.h>
     36        1.1    bouyer #include <sys/proc.h>
     37        1.1    bouyer #include <sys/errno.h>
     38        1.1    bouyer #include <sys/kmem.h>
     39        1.1    bouyer #include <sys/intr.h>
     40        1.1    bouyer 
     41        1.1    bouyer #include <dev/ata/ataconf.h>
     42        1.1    bouyer #include <dev/ata/atareg.h>
     43        1.1    bouyer #include <dev/ata/atavar.h>
     44        1.1    bouyer 
     45        1.1    bouyer #include <dev/ata/satapmpvar.h>
     46        1.1    bouyer #include <dev/ata/satapmpreg.h>
     47        1.1    bouyer #include <dev/ata/satavar.h>
     48        1.1    bouyer #include <dev/ata/satareg.h>
     49        1.1    bouyer 
     50        1.1    bouyer static int
     51        1.6  jakllsch satapmp_read_8(struct ata_channel *chp, int port, int reg, uint64_t *value)
     52        1.1    bouyer {
     53  1.12.24.1  jdolecek 	struct ata_xfer xfer;
     54        1.1    bouyer 	struct atac_softc *atac = chp->ch_atac;
     55        1.1    bouyer 	struct ata_drive_datas *drvp;
     56  1.12.24.2  jdolecek 	int error = 0;
     57        1.1    bouyer 
     58        1.3  jakllsch 	KASSERT(port < PMP_MAX_DRIVES);
     59        1.1    bouyer 	KASSERT(reg < PMP_GSCR_NREGS);
     60        1.1    bouyer 	KASSERT(chp->ch_ndrives >= PMP_MAX_DRIVES);
     61        1.1    bouyer 	drvp = &chp->ch_drive[PMP_PORT_CTL];
     62        1.1    bouyer 	KASSERT(drvp->drive == PMP_PORT_CTL);
     63        1.1    bouyer 
     64  1.12.24.2  jdolecek 	ata_xfer_init(&xfer, true);
     65        1.1    bouyer 
     66  1.12.24.1  jdolecek 	xfer.c_ata_c.r_command = PMPC_READ_PORT;
     67  1.12.24.1  jdolecek 	xfer.c_ata_c.r_features = reg;
     68  1.12.24.1  jdolecek 	xfer.c_ata_c.r_device = port;
     69  1.12.24.1  jdolecek 	xfer.c_ata_c.timeout = 3000; /* 3s */
     70  1.12.24.1  jdolecek 	xfer.c_ata_c.r_st_bmask = 0;
     71  1.12.24.1  jdolecek 	xfer.c_ata_c.r_st_pmask = WDCS_DRDY;
     72  1.12.24.1  jdolecek 	xfer.c_ata_c.flags = AT_LBA48 | AT_READREG | AT_WAIT;
     73        1.1    bouyer 
     74        1.1    bouyer 	if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
     75  1.12.24.1  jdolecek 	    &xfer) != ATACMD_COMPLETE) {
     76        1.1    bouyer 		aprint_error_dev(chp->atabus,
     77       1.11  jakllsch 		    "PMP port %d register %d read failed\n", port, reg);
     78  1.12.24.2  jdolecek 		error = EIO;
     79  1.12.24.2  jdolecek 		goto out;
     80        1.1    bouyer 	}
     81  1.12.24.1  jdolecek 	if (xfer.c_ata_c.flags & (AT_TIMEOU | AT_DF)) {
     82        1.1    bouyer 		aprint_error_dev(chp->atabus,
     83       1.11  jakllsch 		    "PMP port %d register %d read failed, flags 0x%x\n",
     84  1.12.24.1  jdolecek 		    port, reg, xfer.c_ata_c.flags);
     85  1.12.24.2  jdolecek 		error = EIO;
     86  1.12.24.2  jdolecek 		goto out;
     87        1.1    bouyer 	}
     88  1.12.24.1  jdolecek 	if (xfer.c_ata_c.flags & AT_ERROR) {
     89        1.1    bouyer 		aprint_verbose_dev(chp->atabus,
     90       1.11  jakllsch 		    "PMP port %d register %d read failed, error 0x%x\n",
     91  1.12.24.1  jdolecek 		    port, reg, xfer.c_ata_c.r_error);
     92  1.12.24.2  jdolecek 		error = EIO;
     93  1.12.24.2  jdolecek 		goto out;
     94        1.1    bouyer 	}
     95        1.6  jakllsch 
     96  1.12.24.1  jdolecek 	*value = ((uint64_t)((xfer.c_ata_c.r_lba >> 24) & 0xffffff) << 40) |
     97  1.12.24.1  jdolecek 		((uint64_t)((xfer.c_ata_c.r_count >> 8) & 0xff) << 32) |
     98  1.12.24.1  jdolecek 		((uint64_t)((xfer.c_ata_c.r_lba >> 0) & 0xffffff) << 8) |
     99  1.12.24.1  jdolecek 		((uint64_t)((xfer.c_ata_c.r_count >> 0) & 0xff) << 0);
    100        1.6  jakllsch 
    101  1.12.24.2  jdolecek out:
    102  1.12.24.2  jdolecek 	ata_xfer_destroy(&xfer);
    103  1.12.24.2  jdolecek 	return error;
    104        1.1    bouyer }
    105        1.1    bouyer 
    106        1.6  jakllsch static inline int
    107        1.6  jakllsch satapmp_read(struct ata_channel *chp, int port, int reg, uint32_t *value)
    108        1.6  jakllsch {
    109        1.6  jakllsch 	uint64_t value64;
    110        1.6  jakllsch 	int ret;
    111        1.6  jakllsch 
    112        1.6  jakllsch 	ret = satapmp_read_8(chp, port, reg, &value64);
    113        1.6  jakllsch 	if (ret)
    114        1.6  jakllsch 		return ret;
    115        1.6  jakllsch 
    116        1.6  jakllsch 	*value = value64 & 0xffffffff;
    117        1.6  jakllsch 	return ret;
    118        1.6  jakllsch }
    119        1.6  jakllsch 
    120        1.1    bouyer static int
    121        1.6  jakllsch satapmp_write_8(struct ata_channel *chp, int port, int reg, uint64_t value)
    122        1.1    bouyer {
    123  1.12.24.1  jdolecek 	struct ata_xfer xfer;
    124        1.1    bouyer 	struct atac_softc *atac = chp->ch_atac;
    125        1.1    bouyer 	struct ata_drive_datas *drvp;
    126  1.12.24.2  jdolecek 	int error = 0;
    127        1.1    bouyer 
    128        1.3  jakllsch 	KASSERT(port < PMP_MAX_DRIVES);
    129        1.1    bouyer 	KASSERT(reg < PMP_GSCR_NREGS);
    130        1.1    bouyer 	KASSERT(chp->ch_ndrives >= PMP_MAX_DRIVES);
    131        1.1    bouyer 	drvp = &chp->ch_drive[PMP_PORT_CTL];
    132        1.1    bouyer 	KASSERT(drvp->drive == PMP_PORT_CTL);
    133        1.1    bouyer 
    134  1.12.24.2  jdolecek 	ata_xfer_init(&xfer, true);
    135        1.1    bouyer 
    136  1.12.24.1  jdolecek 	xfer.c_ata_c.r_command = PMPC_WRITE_PORT;
    137  1.12.24.1  jdolecek 	xfer.c_ata_c.r_features = reg;
    138  1.12.24.1  jdolecek 	xfer.c_ata_c.r_device = port;
    139  1.12.24.1  jdolecek 	xfer.c_ata_c.r_lba = (((value >> 40) & 0xffffff) << 24) |
    140        1.6  jakllsch 		      (((value >>  8) & 0xffffff) <<  0);
    141  1.12.24.1  jdolecek 	xfer.c_ata_c.r_count = (((value >> 32) & 0xff) << 8) |
    142        1.6  jakllsch 			(((value >>  0) & 0xff) << 0);
    143  1.12.24.1  jdolecek 	xfer.c_ata_c.timeout = 3000; /* 3s */
    144  1.12.24.1  jdolecek 	xfer.c_ata_c.r_st_bmask = 0;
    145  1.12.24.1  jdolecek 	xfer.c_ata_c.r_st_pmask = WDCS_DRDY;
    146  1.12.24.1  jdolecek 	xfer.c_ata_c.flags = AT_LBA48 | AT_WAIT;
    147        1.1    bouyer 
    148        1.1    bouyer 	if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
    149  1.12.24.1  jdolecek 	    &xfer) != ATACMD_COMPLETE) {
    150        1.1    bouyer 		aprint_error_dev(chp->atabus,
    151       1.11  jakllsch 		    "PMP port %d register %d write failed\n", port, reg);
    152  1.12.24.2  jdolecek 		error = EIO;
    153  1.12.24.2  jdolecek 		goto out;
    154        1.1    bouyer 	}
    155  1.12.24.1  jdolecek 	if (xfer.c_ata_c.flags & (AT_TIMEOU | AT_DF)) {
    156        1.1    bouyer 		aprint_error_dev(chp->atabus,
    157       1.11  jakllsch 		    "PMP port %d register %d write failed, flags 0x%x\n",
    158  1.12.24.1  jdolecek 		    port, reg, xfer.c_ata_c.flags);
    159  1.12.24.2  jdolecek 		error = EIO;
    160  1.12.24.2  jdolecek 		goto out;
    161        1.1    bouyer 	}
    162  1.12.24.1  jdolecek 	if (xfer.c_ata_c.flags & AT_ERROR) {
    163        1.1    bouyer 		aprint_verbose_dev(chp->atabus,
    164       1.11  jakllsch 		    "PMP port %d register %d write failed, error 0x%x\n",
    165  1.12.24.1  jdolecek 		    port, reg, xfer.c_ata_c.r_error);
    166  1.12.24.2  jdolecek 		error = EIO;
    167  1.12.24.2  jdolecek 		goto out;
    168        1.1    bouyer 	}
    169  1.12.24.2  jdolecek 
    170  1.12.24.2  jdolecek out:
    171  1.12.24.2  jdolecek 	ata_xfer_destroy(&xfer);
    172  1.12.24.2  jdolecek 	return error;
    173        1.1    bouyer }
    174        1.1    bouyer 
    175        1.6  jakllsch static inline int
    176        1.6  jakllsch satapmp_write(struct ata_channel *chp, int port, int reg, uint32_t value)
    177        1.6  jakllsch {
    178        1.6  jakllsch 	return satapmp_write_8(chp, port, reg, value);
    179        1.6  jakllsch }
    180        1.6  jakllsch 
    181        1.1    bouyer /*
    182        1.1    bouyer  * Reset one port's PHY and bring it online
    183        1.1    bouyer  * XXX duplicate of sata_reset_interface()
    184        1.1    bouyer  */
    185        1.1    bouyer static uint32_t
    186        1.1    bouyer satapmp_reset_device_port(struct ata_channel *chp, int port)
    187        1.1    bouyer {
    188        1.1    bouyer 	uint32_t scontrol, sstatus;
    189        1.1    bouyer 	int i;
    190        1.1    bouyer 
    191        1.1    bouyer 	/* bring the PHY online */
    192        1.1    bouyer 	scontrol = SControl_IPM_NONE | SControl_SPD_ANY | SControl_DET_INIT;
    193        1.1    bouyer 	if (satapmp_write(chp, port, PMP_PSCR_SControl, scontrol) != 0)
    194        1.1    bouyer 		return 0;
    195        1.1    bouyer 
    196        1.1    bouyer 	tsleep(chp, PRIBIO, "sataup", mstohz(50));
    197        1.1    bouyer 	scontrol &= ~SControl_DET_INIT;
    198        1.1    bouyer 	if (satapmp_write(chp, port, PMP_PSCR_SControl, scontrol) != 0)
    199        1.1    bouyer 		return 0;
    200        1.1    bouyer 	tsleep(chp, PRIBIO, "sataup", mstohz(50));
    201        1.1    bouyer 
    202        1.1    bouyer 	/* wait up to 1s for device to come up */
    203        1.1    bouyer 	for (i = 0; i < 100; i++) {
    204        1.1    bouyer 
    205        1.1    bouyer 		if (satapmp_read(chp, port, PMP_PSCR_SStatus, &sstatus) != 0)
    206        1.1    bouyer 			return 0;
    207        1.1    bouyer 		if ((sstatus & SStatus_DET_mask) == SStatus_DET_DEV)
    208        1.1    bouyer 			break;
    209        1.1    bouyer 		tsleep(chp, PRIBIO, "sataup", mstohz(10));
    210        1.1    bouyer 	}
    211        1.1    bouyer 
    212        1.1    bouyer 	switch (sstatus & SStatus_DET_mask) {
    213        1.1    bouyer 	case SStatus_DET_NODEV:
    214        1.1    bouyer 		/* No Device; be silent.  */
    215        1.1    bouyer 		break;
    216        1.1    bouyer 	case SStatus_DET_DEV_NE:
    217        1.1    bouyer 		aprint_error("%s PMP port %d: device connected, but "
    218        1.1    bouyer 		    "communication not established\n",
    219        1.1    bouyer 		    device_xname(chp->atabus), port);
    220        1.1    bouyer 		break;
    221        1.1    bouyer 	case SStatus_DET_OFFLINE:
    222        1.1    bouyer 		aprint_error("%s PMP port %d: PHY offline\n",
    223        1.1    bouyer 		    device_xname(chp->atabus), port);
    224        1.1    bouyer 		break;
    225        1.1    bouyer 	case SStatus_DET_DEV:
    226        1.1    bouyer 		aprint_normal("%s PMP port %d: device present, speed: %s\n",
    227        1.1    bouyer 		    device_xname(chp->atabus), port, sata_speed(sstatus));
    228        1.1    bouyer 		break;
    229        1.1    bouyer 	default:
    230        1.1    bouyer 		aprint_error("%s PMP port %d: unknown SStatus: 0x%08x\n",
    231        1.1    bouyer 		    device_xname(chp->atabus), port, sstatus);
    232        1.1    bouyer 	}
    233        1.1    bouyer 	return(sstatus & SStatus_DET_mask);
    234        1.1    bouyer }
    235        1.1    bouyer 
    236        1.1    bouyer void
    237        1.1    bouyer satapmp_rescan(struct ata_channel *chp) {
    238        1.1    bouyer 	int i;
    239        1.1    bouyer 	uint32_t sig;
    240        1.1    bouyer 
    241        1.1    bouyer 	KASSERT(chp->ch_satapmp_nports <= PMP_PORT_CTL);
    242        1.1    bouyer 	KASSERT(chp->ch_satapmp_nports <= chp->ch_ndrives);
    243        1.1    bouyer 
    244        1.1    bouyer 	for (i = 0; i < chp->ch_satapmp_nports; i++) {
    245       1.10    bouyer 		if (chp->ch_drive[i].drive_type != ATA_DRIVET_NONE ||
    246        1.1    bouyer 		    satapmp_reset_device_port(chp, i) != SStatus_DET_DEV) {
    247        1.1    bouyer 			continue;
    248        1.1    bouyer 		}
    249        1.1    bouyer 		if (satapmp_write(chp, i, PMP_PSCR_SError, 0xffffffff) != 0) {
    250        1.1    bouyer 			aprint_error("%s PMP port %d: can't write SError\n",
    251        1.1    bouyer 			    device_xname(chp->atabus), i);
    252        1.1    bouyer 			continue;
    253        1.1    bouyer 		}
    254        1.1    bouyer 		chp->ch_atac->atac_bustype_ata->ata_reset_drive(
    255        1.1    bouyer 		    &chp->ch_drive[i], AT_WAIT, &sig);
    256        1.1    bouyer 
    257        1.1    bouyer 		sata_interpret_sig(chp, i, sig);
    258        1.1    bouyer 	}
    259        1.1    bouyer }
    260        1.1    bouyer 
    261        1.1    bouyer void
    262        1.1    bouyer satapmp_attach(struct ata_channel *chp)
    263        1.1    bouyer {
    264        1.1    bouyer 	uint32_t id, rev, inf;
    265        1.1    bouyer 
    266        1.1    bouyer 	if (satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_ID, &id) != 0 ||
    267        1.1    bouyer 	    satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_REV, &rev) != 0 ||
    268        1.1    bouyer 	    satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_INF, &inf) != 0) {
    269        1.1    bouyer 		aprint_normal_dev(chp->atabus, "can't read PMP registers\n");
    270        1.1    bouyer 		return;
    271        1.1    bouyer 	}
    272        1.1    bouyer 
    273        1.1    bouyer 	aprint_normal_dev(chp->atabus,
    274        1.1    bouyer 	    "SATA port multiplier, %d ports\n", PMP_INF_NPORTS(inf));
    275        1.1    bouyer 	aprint_verbose_dev(chp->atabus,
    276        1.5  jakllsch 	    "vendor 0x%04x, product 0x%04x",
    277        1.1    bouyer 	    PMP_ID_VEND(id), PMP_ID_DEV(id));
    278        1.1    bouyer 	if (rev & PMP_REV_SPEC_11) {
    279        1.1    bouyer 		aprint_verbose(", revision 1.1");
    280        1.1    bouyer 	} else if (rev & PMP_REV_SPEC_10) {
    281        1.1    bouyer 		aprint_verbose(", revision 1.0");
    282        1.1    bouyer 	} else {
    283        1.1    bouyer 		aprint_verbose(", unknown revision 0x%x", rev & 0x0f);
    284        1.1    bouyer 	}
    285        1.1    bouyer 	aprint_verbose(", level %d\n", PMP_REV_LEVEL(rev));
    286        1.1    bouyer 
    287        1.1    bouyer 	chp->ch_satapmp_nports = PMP_INF_NPORTS(inf);
    288        1.1    bouyer 
    289        1.1    bouyer 	/* reset and bring up PHYs */
    290        1.1    bouyer 	satapmp_rescan(chp);
    291        1.1    bouyer }
    292