satapmp_subr.c revision 1.14.2.1 1 1.14.2.1 jdolecek /* $NetBSD: satapmp_subr.c,v 1.14.2.1 2018/09/22 09:22:59 jdolecek Exp $ */
2 1.1 bouyer
3 1.1 bouyer /*
4 1.1 bouyer * Copyright (c) 2012 Manuel Bouyer. All rights reserved.
5 1.1 bouyer *
6 1.1 bouyer * Redistribution and use in source and binary forms, with or without
7 1.1 bouyer * modification, are permitted provided that the following conditions
8 1.1 bouyer * are met:
9 1.1 bouyer * 1. Redistributions of source code must retain the above copyright
10 1.1 bouyer * notice, this list of conditions and the following disclaimer.
11 1.1 bouyer * 2. Redistributions in binary form must reproduce the above copyright
12 1.1 bouyer * notice, this list of conditions and the following disclaimer in the
13 1.1 bouyer * documentation and/or other materials provided with the distribution.
14 1.1 bouyer *
15 1.1 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 1.1 bouyer * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 1.1 bouyer * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 1.1 bouyer * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 1.1 bouyer * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 1.1 bouyer * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 1.1 bouyer * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 1.1 bouyer * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 1.1 bouyer * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 1.1 bouyer * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 1.1 bouyer */
26 1.1 bouyer
27 1.1 bouyer #include <sys/cdefs.h>
28 1.14.2.1 jdolecek __KERNEL_RCSID(0, "$NetBSD: satapmp_subr.c,v 1.14.2.1 2018/09/22 09:22:59 jdolecek Exp $");
29 1.1 bouyer
30 1.1 bouyer #include <sys/param.h>
31 1.1 bouyer #include <sys/systm.h>
32 1.1 bouyer #include <sys/kernel.h>
33 1.1 bouyer #include <sys/device.h>
34 1.1 bouyer #include <sys/conf.h>
35 1.1 bouyer #include <sys/fcntl.h>
36 1.1 bouyer #include <sys/proc.h>
37 1.1 bouyer #include <sys/errno.h>
38 1.1 bouyer #include <sys/kmem.h>
39 1.1 bouyer #include <sys/intr.h>
40 1.1 bouyer
41 1.1 bouyer #include <dev/ata/ataconf.h>
42 1.1 bouyer #include <dev/ata/atareg.h>
43 1.1 bouyer #include <dev/ata/atavar.h>
44 1.1 bouyer
45 1.1 bouyer #include <dev/ata/satapmpvar.h>
46 1.1 bouyer #include <dev/ata/satapmpreg.h>
47 1.1 bouyer #include <dev/ata/satavar.h>
48 1.1 bouyer #include <dev/ata/satareg.h>
49 1.1 bouyer
50 1.1 bouyer static int
51 1.13 jdolecek satapmp_read_8(struct ata_channel *chp, int port, int reg, uint64_t *value,
52 1.13 jdolecek struct ata_xfer *xfer)
53 1.1 bouyer {
54 1.1 bouyer struct atac_softc *atac = chp->ch_atac;
55 1.1 bouyer struct ata_drive_datas *drvp;
56 1.13 jdolecek int error = 0;
57 1.1 bouyer
58 1.3 jakllsch KASSERT(port < PMP_MAX_DRIVES);
59 1.1 bouyer KASSERT(reg < PMP_GSCR_NREGS);
60 1.1 bouyer KASSERT(chp->ch_ndrives >= PMP_MAX_DRIVES);
61 1.1 bouyer drvp = &chp->ch_drive[PMP_PORT_CTL];
62 1.1 bouyer KASSERT(drvp->drive == PMP_PORT_CTL);
63 1.13 jdolecek ata_channel_lock_owned(chp);
64 1.1 bouyer
65 1.13 jdolecek xfer->c_ata_c.r_command = PMPC_READ_PORT;
66 1.13 jdolecek xfer->c_ata_c.r_features = reg;
67 1.13 jdolecek xfer->c_ata_c.r_device = port;
68 1.13 jdolecek xfer->c_ata_c.timeout = 3000; /* 3s */
69 1.13 jdolecek xfer->c_ata_c.r_st_bmask = 0;
70 1.13 jdolecek xfer->c_ata_c.r_st_pmask = WDCS_DRDY;
71 1.13 jdolecek xfer->c_ata_c.flags = AT_LBA48 | AT_READREG | AT_WAIT;
72 1.1 bouyer
73 1.13 jdolecek ata_channel_unlock(chp);
74 1.1 bouyer if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
75 1.13 jdolecek xfer) != ATACMD_COMPLETE) {
76 1.1 bouyer aprint_error_dev(chp->atabus,
77 1.11 jakllsch "PMP port %d register %d read failed\n", port, reg);
78 1.13 jdolecek error = EIO;
79 1.13 jdolecek goto out;
80 1.1 bouyer }
81 1.13 jdolecek if (xfer->c_ata_c.flags & (AT_TIMEOU | AT_DF)) {
82 1.1 bouyer aprint_error_dev(chp->atabus,
83 1.11 jakllsch "PMP port %d register %d read failed, flags 0x%x\n",
84 1.13 jdolecek port, reg, xfer->c_ata_c.flags);
85 1.13 jdolecek error = EIO;
86 1.13 jdolecek goto out;
87 1.1 bouyer }
88 1.13 jdolecek if (xfer->c_ata_c.flags & AT_ERROR) {
89 1.1 bouyer aprint_verbose_dev(chp->atabus,
90 1.11 jakllsch "PMP port %d register %d read failed, error 0x%x\n",
91 1.13 jdolecek port, reg, xfer->c_ata_c.r_error);
92 1.13 jdolecek error = EIO;
93 1.13 jdolecek goto out;
94 1.1 bouyer }
95 1.6 jakllsch
96 1.13 jdolecek *value = ((uint64_t)((xfer->c_ata_c.r_lba >> 24) & 0xffffff) << 40) |
97 1.13 jdolecek ((uint64_t)((xfer->c_ata_c.r_count >> 8) & 0xff) << 32) |
98 1.13 jdolecek ((uint64_t)((xfer->c_ata_c.r_lba >> 0) & 0xffffff) << 8) |
99 1.13 jdolecek ((uint64_t)((xfer->c_ata_c.r_count >> 0) & 0xff) << 0);
100 1.13 jdolecek
101 1.13 jdolecek out:
102 1.13 jdolecek ata_channel_lock(chp);
103 1.13 jdolecek return error;
104 1.1 bouyer }
105 1.1 bouyer
106 1.6 jakllsch static inline int
107 1.13 jdolecek satapmp_read(struct ata_channel *chp, int port, int reg, uint32_t *value,
108 1.13 jdolecek struct ata_xfer *xfer)
109 1.6 jakllsch {
110 1.6 jakllsch uint64_t value64;
111 1.6 jakllsch int ret;
112 1.6 jakllsch
113 1.13 jdolecek ret = satapmp_read_8(chp, port, reg, &value64, xfer);
114 1.6 jakllsch if (ret)
115 1.6 jakllsch return ret;
116 1.6 jakllsch
117 1.6 jakllsch *value = value64 & 0xffffffff;
118 1.6 jakllsch return ret;
119 1.6 jakllsch }
120 1.6 jakllsch
121 1.1 bouyer static int
122 1.13 jdolecek satapmp_write_8(struct ata_channel *chp, int port, int reg, uint64_t value,
123 1.13 jdolecek struct ata_xfer *xfer)
124 1.1 bouyer {
125 1.1 bouyer struct atac_softc *atac = chp->ch_atac;
126 1.1 bouyer struct ata_drive_datas *drvp;
127 1.13 jdolecek int error = 0;
128 1.1 bouyer
129 1.3 jakllsch KASSERT(port < PMP_MAX_DRIVES);
130 1.1 bouyer KASSERT(reg < PMP_GSCR_NREGS);
131 1.1 bouyer KASSERT(chp->ch_ndrives >= PMP_MAX_DRIVES);
132 1.1 bouyer drvp = &chp->ch_drive[PMP_PORT_CTL];
133 1.1 bouyer KASSERT(drvp->drive == PMP_PORT_CTL);
134 1.13 jdolecek ata_channel_lock_owned(chp);
135 1.1 bouyer
136 1.13 jdolecek xfer->c_ata_c.r_command = PMPC_WRITE_PORT;
137 1.13 jdolecek xfer->c_ata_c.r_features = reg;
138 1.13 jdolecek xfer->c_ata_c.r_device = port;
139 1.13 jdolecek xfer->c_ata_c.r_lba = (((value >> 40) & 0xffffff) << 24) |
140 1.6 jakllsch (((value >> 8) & 0xffffff) << 0);
141 1.13 jdolecek xfer->c_ata_c.r_count = (((value >> 32) & 0xff) << 8) |
142 1.6 jakllsch (((value >> 0) & 0xff) << 0);
143 1.13 jdolecek xfer->c_ata_c.timeout = 3000; /* 3s */
144 1.13 jdolecek xfer->c_ata_c.r_st_bmask = 0;
145 1.13 jdolecek xfer->c_ata_c.r_st_pmask = WDCS_DRDY;
146 1.13 jdolecek xfer->c_ata_c.flags = AT_LBA48 | AT_WAIT;
147 1.1 bouyer
148 1.13 jdolecek ata_channel_unlock(chp);
149 1.1 bouyer if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
150 1.13 jdolecek xfer) != ATACMD_COMPLETE) {
151 1.1 bouyer aprint_error_dev(chp->atabus,
152 1.11 jakllsch "PMP port %d register %d write failed\n", port, reg);
153 1.13 jdolecek error = EIO;
154 1.13 jdolecek goto out;
155 1.1 bouyer }
156 1.13 jdolecek if (xfer->c_ata_c.flags & (AT_TIMEOU | AT_DF)) {
157 1.1 bouyer aprint_error_dev(chp->atabus,
158 1.11 jakllsch "PMP port %d register %d write failed, flags 0x%x\n",
159 1.13 jdolecek port, reg, xfer->c_ata_c.flags);
160 1.13 jdolecek error = EIO;
161 1.13 jdolecek goto out;
162 1.1 bouyer }
163 1.13 jdolecek if (xfer->c_ata_c.flags & AT_ERROR) {
164 1.1 bouyer aprint_verbose_dev(chp->atabus,
165 1.11 jakllsch "PMP port %d register %d write failed, error 0x%x\n",
166 1.13 jdolecek port, reg, xfer->c_ata_c.r_error);
167 1.13 jdolecek error = EIO;
168 1.13 jdolecek goto out;
169 1.1 bouyer }
170 1.13 jdolecek
171 1.13 jdolecek out:
172 1.13 jdolecek ata_channel_lock(chp);
173 1.13 jdolecek return error;
174 1.1 bouyer }
175 1.1 bouyer
176 1.6 jakllsch static inline int
177 1.13 jdolecek satapmp_write(struct ata_channel *chp, int port, int reg, uint32_t value,
178 1.13 jdolecek struct ata_xfer *xfer)
179 1.6 jakllsch {
180 1.13 jdolecek return satapmp_write_8(chp, port, reg, value, xfer);
181 1.6 jakllsch }
182 1.6 jakllsch
183 1.1 bouyer /*
184 1.1 bouyer * Reset one port's PHY and bring it online
185 1.1 bouyer * XXX duplicate of sata_reset_interface()
186 1.1 bouyer */
187 1.1 bouyer static uint32_t
188 1.13 jdolecek satapmp_reset_device_port(struct ata_channel *chp, int port,
189 1.13 jdolecek struct ata_xfer *xfer)
190 1.1 bouyer {
191 1.1 bouyer uint32_t scontrol, sstatus;
192 1.1 bouyer int i;
193 1.1 bouyer
194 1.13 jdolecek ata_channel_lock_owned(chp);
195 1.13 jdolecek
196 1.1 bouyer /* bring the PHY online */
197 1.1 bouyer scontrol = SControl_IPM_NONE | SControl_SPD_ANY | SControl_DET_INIT;
198 1.13 jdolecek if (satapmp_write(chp, port, PMP_PSCR_SControl, scontrol, xfer) != 0)
199 1.1 bouyer return 0;
200 1.1 bouyer
201 1.13 jdolecek ata_delay(chp, 50, "sataup", AT_WAIT);
202 1.1 bouyer scontrol &= ~SControl_DET_INIT;
203 1.13 jdolecek if (satapmp_write(chp, port, PMP_PSCR_SControl, scontrol, xfer) != 0)
204 1.1 bouyer return 0;
205 1.13 jdolecek ata_delay(chp, 50, "sataup", AT_WAIT);
206 1.1 bouyer
207 1.1 bouyer /* wait up to 1s for device to come up */
208 1.1 bouyer for (i = 0; i < 100; i++) {
209 1.1 bouyer
210 1.13 jdolecek if (satapmp_read(chp, port, PMP_PSCR_SStatus, &sstatus,
211 1.13 jdolecek xfer) != 0)
212 1.1 bouyer return 0;
213 1.1 bouyer if ((sstatus & SStatus_DET_mask) == SStatus_DET_DEV)
214 1.1 bouyer break;
215 1.13 jdolecek ata_delay(chp, 10, "sataup", AT_WAIT);
216 1.1 bouyer }
217 1.1 bouyer
218 1.1 bouyer switch (sstatus & SStatus_DET_mask) {
219 1.1 bouyer case SStatus_DET_NODEV:
220 1.1 bouyer /* No Device; be silent. */
221 1.1 bouyer break;
222 1.1 bouyer case SStatus_DET_DEV_NE:
223 1.1 bouyer aprint_error("%s PMP port %d: device connected, but "
224 1.1 bouyer "communication not established\n",
225 1.1 bouyer device_xname(chp->atabus), port);
226 1.1 bouyer break;
227 1.1 bouyer case SStatus_DET_OFFLINE:
228 1.1 bouyer aprint_error("%s PMP port %d: PHY offline\n",
229 1.1 bouyer device_xname(chp->atabus), port);
230 1.1 bouyer break;
231 1.1 bouyer case SStatus_DET_DEV:
232 1.1 bouyer aprint_normal("%s PMP port %d: device present, speed: %s\n",
233 1.1 bouyer device_xname(chp->atabus), port, sata_speed(sstatus));
234 1.1 bouyer break;
235 1.1 bouyer default:
236 1.1 bouyer aprint_error("%s PMP port %d: unknown SStatus: 0x%08x\n",
237 1.1 bouyer device_xname(chp->atabus), port, sstatus);
238 1.1 bouyer }
239 1.1 bouyer return(sstatus & SStatus_DET_mask);
240 1.1 bouyer }
241 1.1 bouyer
242 1.14 jdolecek static void __noinline
243 1.13 jdolecek satapmp_rescan(struct ata_channel *chp, struct ata_xfer *xfer)
244 1.13 jdolecek {
245 1.1 bouyer int i;
246 1.1 bouyer uint32_t sig;
247 1.1 bouyer
248 1.1 bouyer KASSERT(chp->ch_satapmp_nports <= PMP_PORT_CTL);
249 1.1 bouyer KASSERT(chp->ch_satapmp_nports <= chp->ch_ndrives);
250 1.13 jdolecek ata_channel_lock_owned(chp);
251 1.1 bouyer
252 1.1 bouyer for (i = 0; i < chp->ch_satapmp_nports; i++) {
253 1.10 bouyer if (chp->ch_drive[i].drive_type != ATA_DRIVET_NONE ||
254 1.13 jdolecek satapmp_reset_device_port(chp, i, xfer)
255 1.13 jdolecek != SStatus_DET_DEV) {
256 1.1 bouyer continue;
257 1.1 bouyer }
258 1.13 jdolecek if (satapmp_write(chp, i, PMP_PSCR_SError, 0xffffffff, xfer)
259 1.13 jdolecek != 0) {
260 1.1 bouyer aprint_error("%s PMP port %d: can't write SError\n",
261 1.1 bouyer device_xname(chp->atabus), i);
262 1.1 bouyer continue;
263 1.1 bouyer }
264 1.13 jdolecek ata_channel_unlock(chp);
265 1.1 bouyer chp->ch_atac->atac_bustype_ata->ata_reset_drive(
266 1.1 bouyer &chp->ch_drive[i], AT_WAIT, &sig);
267 1.13 jdolecek ata_channel_lock(chp);
268 1.1 bouyer
269 1.1 bouyer sata_interpret_sig(chp, i, sig);
270 1.1 bouyer }
271 1.1 bouyer }
272 1.1 bouyer
273 1.1 bouyer void
274 1.1 bouyer satapmp_attach(struct ata_channel *chp)
275 1.1 bouyer {
276 1.1 bouyer uint32_t id, rev, inf;
277 1.13 jdolecek struct ata_xfer *xfer;
278 1.1 bouyer
279 1.14.2.1 jdolecek xfer = ata_get_xfer(chp, false);
280 1.13 jdolecek if (xfer == NULL) {
281 1.13 jdolecek aprint_normal_dev(chp->atabus, "no available xfer\n");
282 1.13 jdolecek return;
283 1.13 jdolecek }
284 1.13 jdolecek
285 1.13 jdolecek ata_channel_lock(chp);
286 1.13 jdolecek
287 1.13 jdolecek if (satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_ID, &id, xfer) != 0 ||
288 1.13 jdolecek satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_REV, &rev, xfer) != 0 ||
289 1.13 jdolecek satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_INF, &inf, xfer) != 0) {
290 1.1 bouyer aprint_normal_dev(chp->atabus, "can't read PMP registers\n");
291 1.13 jdolecek goto out;
292 1.1 bouyer }
293 1.1 bouyer
294 1.13 jdolecek aprint_normal("%s at %s channel %d: SATA port multiplier, %d ports\n",
295 1.13 jdolecek device_xname(chp->atabus),
296 1.13 jdolecek device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
297 1.13 jdolecek PMP_INF_NPORTS(inf));
298 1.1 bouyer aprint_verbose_dev(chp->atabus,
299 1.5 jakllsch "vendor 0x%04x, product 0x%04x",
300 1.1 bouyer PMP_ID_VEND(id), PMP_ID_DEV(id));
301 1.1 bouyer if (rev & PMP_REV_SPEC_11) {
302 1.1 bouyer aprint_verbose(", revision 1.1");
303 1.1 bouyer } else if (rev & PMP_REV_SPEC_10) {
304 1.1 bouyer aprint_verbose(", revision 1.0");
305 1.1 bouyer } else {
306 1.1 bouyer aprint_verbose(", unknown revision 0x%x", rev & 0x0f);
307 1.1 bouyer }
308 1.1 bouyer aprint_verbose(", level %d\n", PMP_REV_LEVEL(rev));
309 1.1 bouyer
310 1.1 bouyer chp->ch_satapmp_nports = PMP_INF_NPORTS(inf);
311 1.1 bouyer
312 1.1 bouyer /* reset and bring up PHYs */
313 1.13 jdolecek satapmp_rescan(chp, xfer);
314 1.13 jdolecek
315 1.13 jdolecek out:
316 1.13 jdolecek ata_channel_unlock(chp);
317 1.13 jdolecek ata_free_xfer(chp, xfer);
318 1.1 bouyer }
319