Home | History | Annotate | Line # | Download | only in ata
satapmp_subr.c revision 1.6
      1  1.6  jakllsch /*	$NetBSD: satapmp_subr.c,v 1.6 2012/07/22 18:21:17 jakllsch Exp $	*/
      2  1.1    bouyer 
      3  1.1    bouyer /*
      4  1.1    bouyer  * Copyright (c) 2012 Manuel Bouyer.  All rights reserved.
      5  1.1    bouyer  *
      6  1.1    bouyer  * Redistribution and use in source and binary forms, with or without
      7  1.1    bouyer  * modification, are permitted provided that the following conditions
      8  1.1    bouyer  * are met:
      9  1.1    bouyer  * 1. Redistributions of source code must retain the above copyright
     10  1.1    bouyer  *    notice, this list of conditions and the following disclaimer.
     11  1.1    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     12  1.1    bouyer  *    notice, this list of conditions and the following disclaimer in the
     13  1.1    bouyer  *    documentation and/or other materials provided with the distribution.
     14  1.1    bouyer  *
     15  1.1    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     16  1.1    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     17  1.1    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     18  1.1    bouyer  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     19  1.1    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     20  1.1    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     21  1.1    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     22  1.1    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     23  1.1    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     24  1.1    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     25  1.1    bouyer  */
     26  1.1    bouyer 
     27  1.1    bouyer #include <sys/cdefs.h>
     28  1.6  jakllsch __KERNEL_RCSID(0, "$NetBSD: satapmp_subr.c,v 1.6 2012/07/22 18:21:17 jakllsch Exp $");
     29  1.1    bouyer 
     30  1.1    bouyer #include <sys/param.h>
     31  1.1    bouyer #include <sys/systm.h>
     32  1.1    bouyer #include <sys/kernel.h>
     33  1.1    bouyer #include <sys/device.h>
     34  1.1    bouyer #include <sys/conf.h>
     35  1.1    bouyer #include <sys/fcntl.h>
     36  1.1    bouyer #include <sys/proc.h>
     37  1.1    bouyer #include <sys/errno.h>
     38  1.1    bouyer #include <sys/kmem.h>
     39  1.1    bouyer #include <sys/intr.h>
     40  1.1    bouyer 
     41  1.1    bouyer #include <dev/ata/ataconf.h>
     42  1.1    bouyer #include <dev/ata/atareg.h>
     43  1.1    bouyer #include <dev/ata/atavar.h>
     44  1.1    bouyer 
     45  1.1    bouyer #include <dev/ata/satapmpvar.h>
     46  1.1    bouyer #include <dev/ata/satapmpreg.h>
     47  1.1    bouyer #include <dev/ata/satavar.h>
     48  1.1    bouyer #include <dev/ata/satareg.h>
     49  1.1    bouyer 
     50  1.1    bouyer static int
     51  1.6  jakllsch satapmp_read_8(struct ata_channel *chp, int port, int reg, uint64_t *value)
     52  1.1    bouyer {
     53  1.1    bouyer 	struct ata_command ata_c;
     54  1.1    bouyer 	struct atac_softc *atac = chp->ch_atac;
     55  1.1    bouyer 	struct ata_drive_datas *drvp;
     56  1.1    bouyer 
     57  1.3  jakllsch 	KASSERT(port < PMP_MAX_DRIVES);
     58  1.1    bouyer 	KASSERT(reg < PMP_GSCR_NREGS);
     59  1.1    bouyer 	KASSERT(chp->ch_ndrives >= PMP_MAX_DRIVES);
     60  1.1    bouyer 	drvp = &chp->ch_drive[PMP_PORT_CTL];
     61  1.1    bouyer 	KASSERT(drvp->drive == PMP_PORT_CTL);
     62  1.1    bouyer 
     63  1.1    bouyer 	memset(&ata_c, 0, sizeof(struct ata_command));
     64  1.1    bouyer 
     65  1.1    bouyer 	ata_c.r_command = PMPC_READ_PORT;
     66  1.1    bouyer 	ata_c.r_features = reg;
     67  1.4  jakllsch 	ata_c.r_device = port;
     68  1.1    bouyer 	ata_c.timeout = 3000; /* 3s */
     69  1.1    bouyer 	ata_c.r_st_bmask = WDCS_DRDY;
     70  1.1    bouyer 	ata_c.r_st_pmask = 0;
     71  1.4  jakllsch 	ata_c.flags = AT_LBA48 | AT_READREG | AT_WAIT;
     72  1.1    bouyer 
     73  1.1    bouyer 	if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
     74  1.1    bouyer 	    &ata_c) != ATACMD_COMPLETE) {
     75  1.1    bouyer 		aprint_error_dev(chp->atabus,
     76  1.1    bouyer 		    "PMP register %d read failed\n", reg);
     77  1.1    bouyer 		return EIO;
     78  1.1    bouyer 	}
     79  1.1    bouyer 	if (ata_c.flags & (AT_TIMEOU | AT_DF)) {
     80  1.1    bouyer 		aprint_error_dev(chp->atabus,
     81  1.1    bouyer 		    "PMP register %d read failed, flags 0x%x\n",
     82  1.1    bouyer 		    reg, ata_c.flags);
     83  1.1    bouyer 		return EIO;
     84  1.1    bouyer 	}
     85  1.1    bouyer 	if (ata_c.flags & AT_ERROR) {
     86  1.1    bouyer 		aprint_verbose_dev(chp->atabus,
     87  1.1    bouyer 		    "PMP register %d read failed, error 0x%x\n",
     88  1.1    bouyer 		    reg, ata_c.r_error);
     89  1.1    bouyer 		return EIO;
     90  1.1    bouyer 	}
     91  1.6  jakllsch 
     92  1.6  jakllsch 	*value = ((uint64_t)((ata_c.r_lba >> 24) & 0xffffff) << 40) |
     93  1.6  jakllsch 		((uint64_t)((ata_c.r_count >> 8) & 0xff) << 32) |
     94  1.6  jakllsch 		((uint64_t)((ata_c.r_lba >> 0) & 0xffffff) << 8) |
     95  1.6  jakllsch 		((uint64_t)((ata_c.r_count >> 0) & 0xff) << 0);
     96  1.6  jakllsch 
     97  1.1    bouyer 	return 0;
     98  1.1    bouyer }
     99  1.1    bouyer 
    100  1.6  jakllsch static inline int
    101  1.6  jakllsch satapmp_read(struct ata_channel *chp, int port, int reg, uint32_t *value)
    102  1.6  jakllsch {
    103  1.6  jakllsch 	uint64_t value64;
    104  1.6  jakllsch 	int ret;
    105  1.6  jakllsch 
    106  1.6  jakllsch 	ret = satapmp_read_8(chp, port, reg, &value64);
    107  1.6  jakllsch 	if (ret)
    108  1.6  jakllsch 		return ret;
    109  1.6  jakllsch 
    110  1.6  jakllsch 	*value = value64 & 0xffffffff;
    111  1.6  jakllsch 	return ret;
    112  1.6  jakllsch }
    113  1.6  jakllsch 
    114  1.1    bouyer static int
    115  1.6  jakllsch satapmp_write_8(struct ata_channel *chp, int port, int reg, uint64_t value)
    116  1.1    bouyer {
    117  1.1    bouyer 	struct ata_command ata_c;
    118  1.1    bouyer 	struct atac_softc *atac = chp->ch_atac;
    119  1.1    bouyer 	struct ata_drive_datas *drvp;
    120  1.1    bouyer 
    121  1.3  jakllsch 	KASSERT(port < PMP_MAX_DRIVES);
    122  1.1    bouyer 	KASSERT(reg < PMP_GSCR_NREGS);
    123  1.1    bouyer 	KASSERT(chp->ch_ndrives >= PMP_MAX_DRIVES);
    124  1.1    bouyer 	drvp = &chp->ch_drive[PMP_PORT_CTL];
    125  1.1    bouyer 	KASSERT(drvp->drive == PMP_PORT_CTL);
    126  1.1    bouyer 
    127  1.1    bouyer 	memset(&ata_c, 0, sizeof(struct ata_command));
    128  1.1    bouyer 
    129  1.1    bouyer 	ata_c.r_command = PMPC_WRITE_PORT;
    130  1.1    bouyer 	ata_c.r_features = reg;
    131  1.4  jakllsch 	ata_c.r_device = port;
    132  1.6  jakllsch 	ata_c.r_lba = (((value >> 40) & 0xffffff) << 24) |
    133  1.6  jakllsch 		      (((value >>  8) & 0xffffff) <<  0);
    134  1.6  jakllsch 	ata_c.r_count = (((value >> 32) & 0xff) << 8) |
    135  1.6  jakllsch 			(((value >>  0) & 0xff) << 0);
    136  1.1    bouyer 	ata_c.timeout = 3000; /* 3s */
    137  1.1    bouyer 	ata_c.r_st_bmask = WDCS_DRDY;
    138  1.1    bouyer 	ata_c.r_st_pmask = 0;
    139  1.4  jakllsch 	ata_c.flags = AT_LBA48 | AT_WAIT;
    140  1.1    bouyer 
    141  1.1    bouyer 	if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
    142  1.1    bouyer 	    &ata_c) != ATACMD_COMPLETE) {
    143  1.1    bouyer 		aprint_error_dev(chp->atabus,
    144  1.1    bouyer 		    "PMP register %d write failed\n", reg);
    145  1.1    bouyer 		return EIO;
    146  1.1    bouyer 	}
    147  1.1    bouyer 	if (ata_c.flags & (AT_TIMEOU | AT_DF)) {
    148  1.1    bouyer 		aprint_error_dev(chp->atabus,
    149  1.1    bouyer 		    "PMP register %d write failed, flags 0x%x\n",
    150  1.1    bouyer 		    reg, ata_c.flags);
    151  1.1    bouyer 		return EIO;
    152  1.1    bouyer 	}
    153  1.1    bouyer 	if (ata_c.flags & AT_ERROR) {
    154  1.1    bouyer 		aprint_verbose_dev(chp->atabus,
    155  1.1    bouyer 		    "PMP register %d write failed, error 0x%x\n",
    156  1.1    bouyer 		    reg, ata_c.r_error);
    157  1.1    bouyer 		return EIO;
    158  1.1    bouyer 	}
    159  1.1    bouyer 	return 0;
    160  1.1    bouyer }
    161  1.1    bouyer 
    162  1.6  jakllsch static inline int
    163  1.6  jakllsch satapmp_write(struct ata_channel *chp, int port, int reg, uint32_t value)
    164  1.6  jakllsch {
    165  1.6  jakllsch 	return satapmp_write_8(chp, port, reg, value);
    166  1.6  jakllsch }
    167  1.6  jakllsch 
    168  1.1    bouyer /*
    169  1.1    bouyer  * Reset one port's PHY and bring it online
    170  1.1    bouyer  * XXX duplicate of sata_reset_interface()
    171  1.1    bouyer  */
    172  1.1    bouyer static uint32_t
    173  1.1    bouyer satapmp_reset_device_port(struct ata_channel *chp, int port)
    174  1.1    bouyer {
    175  1.1    bouyer 	uint32_t scontrol, sstatus;
    176  1.1    bouyer 	int i;
    177  1.1    bouyer 
    178  1.1    bouyer 	/* bring the PHY online */
    179  1.1    bouyer 	scontrol = SControl_IPM_NONE | SControl_SPD_ANY | SControl_DET_INIT;
    180  1.1    bouyer 	if (satapmp_write(chp, port, PMP_PSCR_SControl, scontrol) != 0)
    181  1.1    bouyer 		return 0;
    182  1.1    bouyer 
    183  1.1    bouyer 	tsleep(chp, PRIBIO, "sataup", mstohz(50));
    184  1.1    bouyer 	scontrol &= ~SControl_DET_INIT;
    185  1.1    bouyer 	if (satapmp_write(chp, port, PMP_PSCR_SControl, scontrol) != 0)
    186  1.1    bouyer 		return 0;
    187  1.1    bouyer 	tsleep(chp, PRIBIO, "sataup", mstohz(50));
    188  1.1    bouyer 
    189  1.1    bouyer 	/* wait up to 1s for device to come up */
    190  1.1    bouyer 	for (i = 0; i < 100; i++) {
    191  1.1    bouyer 
    192  1.1    bouyer 		if (satapmp_read(chp, port, PMP_PSCR_SStatus, &sstatus) != 0)
    193  1.1    bouyer 			return 0;
    194  1.1    bouyer 		if ((sstatus & SStatus_DET_mask) == SStatus_DET_DEV)
    195  1.1    bouyer 			break;
    196  1.1    bouyer 		tsleep(chp, PRIBIO, "sataup", mstohz(10));
    197  1.1    bouyer 	}
    198  1.1    bouyer 
    199  1.1    bouyer 	switch (sstatus & SStatus_DET_mask) {
    200  1.1    bouyer 	case SStatus_DET_NODEV:
    201  1.1    bouyer 		/* No Device; be silent.  */
    202  1.1    bouyer 		break;
    203  1.1    bouyer 	case SStatus_DET_DEV_NE:
    204  1.1    bouyer 		aprint_error("%s PMP port %d: device connected, but "
    205  1.1    bouyer 		    "communication not established\n",
    206  1.1    bouyer 		    device_xname(chp->atabus), port);
    207  1.1    bouyer 		break;
    208  1.1    bouyer 	case SStatus_DET_OFFLINE:
    209  1.1    bouyer 		aprint_error("%s PMP port %d: PHY offline\n",
    210  1.1    bouyer 		    device_xname(chp->atabus), port);
    211  1.1    bouyer 		break;
    212  1.1    bouyer 	case SStatus_DET_DEV:
    213  1.1    bouyer 		aprint_normal("%s PMP port %d: device present, speed: %s\n",
    214  1.1    bouyer 		    device_xname(chp->atabus), port, sata_speed(sstatus));
    215  1.1    bouyer 		break;
    216  1.1    bouyer 	default:
    217  1.1    bouyer 		aprint_error("%s PMP port %d: unknown SStatus: 0x%08x\n",
    218  1.1    bouyer 		    device_xname(chp->atabus), port, sstatus);
    219  1.1    bouyer 	}
    220  1.1    bouyer 	return(sstatus & SStatus_DET_mask);
    221  1.1    bouyer }
    222  1.1    bouyer 
    223  1.1    bouyer void
    224  1.1    bouyer satapmp_rescan(struct ata_channel *chp) {
    225  1.1    bouyer 	int i;
    226  1.1    bouyer 	uint32_t sig;
    227  1.1    bouyer 
    228  1.1    bouyer 	KASSERT(chp->ch_satapmp_nports <= PMP_PORT_CTL);
    229  1.1    bouyer 	KASSERT(chp->ch_satapmp_nports <= chp->ch_ndrives);
    230  1.1    bouyer 
    231  1.1    bouyer 	for (i = 0; i < chp->ch_satapmp_nports; i++) {
    232  1.2       dsl 		if (chp->ch_drive[i].drive_type != ATA_DRIVET_NONE ||
    233  1.1    bouyer 		    satapmp_reset_device_port(chp, i) != SStatus_DET_DEV) {
    234  1.1    bouyer 			continue;
    235  1.1    bouyer 		}
    236  1.1    bouyer 		if (satapmp_write(chp, i, PMP_PSCR_SError, 0xffffffff) != 0) {
    237  1.1    bouyer 			aprint_error("%s PMP port %d: can't write SError\n",
    238  1.1    bouyer 			    device_xname(chp->atabus), i);
    239  1.1    bouyer 			continue;
    240  1.1    bouyer 		}
    241  1.1    bouyer 		chp->ch_atac->atac_bustype_ata->ata_reset_drive(
    242  1.1    bouyer 		    &chp->ch_drive[i], AT_WAIT, &sig);
    243  1.1    bouyer 
    244  1.1    bouyer 		sata_interpret_sig(chp, i, sig);
    245  1.1    bouyer 	}
    246  1.1    bouyer }
    247  1.1    bouyer 
    248  1.1    bouyer void
    249  1.1    bouyer satapmp_attach(struct ata_channel *chp)
    250  1.1    bouyer {
    251  1.1    bouyer 	uint32_t id, rev, inf;
    252  1.1    bouyer 
    253  1.1    bouyer 	if (satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_ID, &id) != 0 ||
    254  1.1    bouyer 	    satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_REV, &rev) != 0 ||
    255  1.1    bouyer 	    satapmp_read(chp, PMP_PORT_CTL, PMP_GSCR_INF, &inf) != 0) {
    256  1.1    bouyer 		aprint_normal_dev(chp->atabus, "can't read PMP registers\n");
    257  1.1    bouyer 		return;
    258  1.1    bouyer 	}
    259  1.1    bouyer 
    260  1.1    bouyer 	aprint_normal_dev(chp->atabus,
    261  1.1    bouyer 	    "SATA port multiplier, %d ports\n", PMP_INF_NPORTS(inf));
    262  1.1    bouyer 	aprint_verbose_dev(chp->atabus,
    263  1.5  jakllsch 	    "vendor 0x%04x, product 0x%04x",
    264  1.1    bouyer 	    PMP_ID_VEND(id), PMP_ID_DEV(id));
    265  1.1    bouyer 	if (rev & PMP_REV_SPEC_11) {
    266  1.1    bouyer 		aprint_verbose(", revision 1.1");
    267  1.1    bouyer 	} else if (rev & PMP_REV_SPEC_10) {
    268  1.1    bouyer 		aprint_verbose(", revision 1.0");
    269  1.1    bouyer 	} else {
    270  1.1    bouyer 		aprint_verbose(", unknown revision 0x%x", rev & 0x0f);
    271  1.1    bouyer 	}
    272  1.1    bouyer 	aprint_verbose(", level %d\n", PMP_REV_LEVEL(rev));
    273  1.1    bouyer 
    274  1.1    bouyer 	chp->ch_satapmp_nports = PMP_INF_NPORTS(inf);
    275  1.1    bouyer 
    276  1.1    bouyer 	/* reset and bring up PHYs */
    277  1.1    bouyer 	satapmp_rescan(chp);
    278  1.1    bouyer }
    279