Home | History | Annotate | Line # | Download | only in cardbus
ahc_cardbus.c revision 1.24
      1 /*	$NetBSD: ahc_cardbus.c,v 1.24 2008/04/28 20:23:47 martin Exp $	*/
      2 
      3 /*-
      4  * Copyright (c) 2000, 2005 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
      9  * NASA Ames Research Center.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions and the following disclaimer.
     16  * 2. Redistributions in binary form must reproduce the above copyright
     17  *    notice, this list of conditions and the following disclaimer in the
     18  *    documentation and/or other materials provided with the distribution.
     19  *
     20  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     21  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     22  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     23  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     30  * POSSIBILITY OF SUCH DAMAGE.
     31  */
     32 
     33 /*
     34  * CardBus front-end for the Adaptec AIC-7xxx family of SCSI controllers.
     35  *
     36  * TODO:
     37  *	- power management
     38  */
     39 
     40 #include <sys/cdefs.h>
     41 __KERNEL_RCSID(0, "$NetBSD: ahc_cardbus.c,v 1.24 2008/04/28 20:23:47 martin Exp $");
     42 
     43 #include "opt_ahc_cardbus.h"
     44 
     45 #include <sys/param.h>
     46 #include <sys/systm.h>
     47 #include <sys/malloc.h>
     48 #include <sys/kernel.h>
     49 #include <sys/queue.h>
     50 #include <sys/device.h>
     51 
     52 #include <sys/bus.h>
     53 #include <sys/intr.h>
     54 
     55 #include <dev/scsipi/scsi_all.h>
     56 #include <dev/scsipi/scsipi_all.h>
     57 #include <dev/scsipi/scsiconf.h>
     58 
     59 #include <dev/pci/pcireg.h>
     60 
     61 #include <dev/cardbus/cardbusvar.h>
     62 #include <dev/pci/pcidevs.h>
     63 
     64 #include <dev/ic/aic7xxx_osm.h>
     65 #include <dev/ic/aic7xxx_inline.h>
     66 
     67 
     68 #ifndef	AHC_CARDBUS_DEFAULT_SCSI_ID
     69 #define	AHC_CARDBUS_DEFAULT_SCSI_ID	0x7
     70 #endif
     71 
     72 #define	AHC_CARDBUS_IOBA	0x10
     73 #define	AHC_CARDBUS_MMBA	0x14
     74 
     75 struct ahc_cardbus_softc {
     76 	struct ahc_softc sc_ahc;	/* real AHC */
     77 
     78 	/* CardBus-specific goo. */
     79 	cardbus_devfunc_t sc_ct;	/* our CardBus devfuncs */
     80 	int	sc_intrline;		/* our interrupt line */
     81 	cardbustag_t sc_tag;
     82 
     83 	int	sc_cbenable;		/* what CardBus access type to enable */
     84 	int	sc_csr;			/* CSR bits */
     85 	bus_size_t sc_size;
     86 };
     87 
     88 int	ahc_cardbus_match(struct device *, struct cfdata *, void *);
     89 void	ahc_cardbus_attach(struct device *, struct device *, void *);
     90 int	ahc_cardbus_detach(struct device *, int);
     91 int	ahc_activate(struct device *self, enum devact act);
     92 
     93 CFATTACH_DECL(ahc_cardbus, sizeof(struct ahc_cardbus_softc),
     94     ahc_cardbus_match, ahc_cardbus_attach, ahc_cardbus_detach, ahc_activate);
     95 
     96 int
     97 ahc_cardbus_match(struct device *parent, struct cfdata *match,
     98     void *aux)
     99 {
    100 	struct cardbus_attach_args *ca = aux;
    101 
    102 	if (CARDBUS_VENDOR(ca->ca_id) == PCI_VENDOR_ADP &&
    103 	    CARDBUS_PRODUCT(ca->ca_id) == PCI_PRODUCT_ADP_APA1480)
    104 		return (1);
    105 
    106 	return (0);
    107 }
    108 
    109 void
    110 ahc_cardbus_attach(struct device *parent, struct device *self,
    111     void *aux)
    112 {
    113 	struct cardbus_attach_args *ca = aux;
    114 	struct ahc_cardbus_softc *csc = device_private(self);
    115 	struct ahc_softc *ahc = &csc->sc_ahc;
    116 	cardbus_devfunc_t ct = ca->ca_ct;
    117 	cardbus_chipset_tag_t cc = ct->ct_cc;
    118 	cardbus_function_tag_t cf = ct->ct_cf;
    119 	bus_space_tag_t bst;
    120 	bus_space_handle_t bsh;
    121 	pcireg_t reg;
    122 	u_int sxfrctl1 = 0;
    123 	u_char sblkctl;
    124 
    125 
    126 	csc->sc_ct = ct;
    127 	csc->sc_tag = ca->ca_tag;
    128 	csc->sc_intrline = ca->ca_intrline;
    129 
    130 	printf(": Adaptec ADP-1480 SCSI\n");
    131 
    132 	/*
    133 	 * Map the device.
    134 	 */
    135 	csc->sc_csr = PCI_COMMAND_MASTER_ENABLE;
    136 	if (Cardbus_mapreg_map(csc->sc_ct, AHC_CARDBUS_MMBA,
    137 	    PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
    138 	    &bst, &bsh, NULL, &csc->sc_size) == 0) {
    139 		csc->sc_cbenable = CARDBUS_MEM_ENABLE;
    140 		csc->sc_csr |= PCI_COMMAND_MEM_ENABLE;
    141 	} else if (Cardbus_mapreg_map(csc->sc_ct, AHC_CARDBUS_IOBA,
    142 	    PCI_MAPREG_TYPE_IO, 0, &bst, &bsh, NULL, &csc->sc_size) == 0) {
    143 		csc->sc_cbenable = CARDBUS_IO_ENABLE;
    144 		csc->sc_csr |= PCI_COMMAND_IO_ENABLE;
    145 	} else {
    146 		printf("%s: unable to map device registers\n",
    147 		    ahc_name(ahc));
    148 		return;
    149 	}
    150 
    151 	/* Make sure the right access type is on the CardBus bridge. */
    152 	(*ct->ct_cf->cardbus_ctrl)(cc, csc->sc_cbenable);
    153 	(*ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_BM_ENABLE);
    154 
    155 	/* Enable the appropriate bits in the PCI CSR. */
    156 	reg = cardbus_conf_read(cc, cf, ca->ca_tag, PCI_COMMAND_STATUS_REG);
    157 	reg &= ~(PCI_COMMAND_IO_ENABLE|PCI_COMMAND_MEM_ENABLE);
    158 	reg |= csc->sc_csr;
    159 	cardbus_conf_write(cc, cf, ca->ca_tag, PCI_COMMAND_STATUS_REG, reg);
    160 
    161 	/*
    162 	 * Make sure the latency timer is set to some reasonable
    163 	 * value.
    164 	 */
    165 	reg = cardbus_conf_read(cc, cf, ca->ca_tag, PCI_BHLC_REG);
    166 	if (PCI_LATTIMER(reg) < 0x20) {
    167 		reg &= ~(PCI_LATTIMER_MASK << PCI_LATTIMER_SHIFT);
    168 		reg |= (0x20 << PCI_LATTIMER_SHIFT);
    169 		cardbus_conf_write(cc, cf, ca->ca_tag, PCI_BHLC_REG, reg);
    170 	}
    171 
    172 	ahc_set_name(ahc, device_xname(&ahc->sc_dev));
    173 
    174 	ahc->parent_dmat = ca->ca_dmat;
    175 	ahc->tag = bst;
    176 	ahc->bsh = bsh;
    177 
    178 	/*
    179 	 * ADP-1480 is always an AIC-7860.
    180 	 */
    181 	ahc->chip = AHC_AIC7860 | AHC_PCI;
    182 	ahc->features = AHC_AIC7860_FE|AHC_REMOVABLE;
    183 	ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
    184 	if (PCI_REVISION(ca->ca_class) >= 1)
    185 		ahc->bugs |= AHC_PCI_2_1_RETRY_BUG;
    186 
    187 	if (ahc_softc_init(ahc) != 0)
    188 		return;
    189 
    190 	/*
    191 	 * On all CardBus adapters, we allow SCB paging.
    192 	 */
    193 	ahc->flags = AHC_PAGESCBS;
    194 
    195 	ahc->channel = 'A';
    196 
    197 	ahc_intr_enable(ahc, FALSE);
    198 
    199 	ahc_reset(ahc);
    200 
    201 	/*
    202 	 * Establish the interrupt.
    203 	 */
    204 	ahc->ih = cardbus_intr_establish(cc, cf, ca->ca_intrline, IPL_BIO,
    205 	    ahc_intr, ahc);
    206 	if (ahc->ih == NULL) {
    207 		printf("%s: unable to establish interrupt at %d\n",
    208 		    ahc_name(ahc), ca->ca_intrline);
    209 		return;
    210 	}
    211 	printf("%s: interrupting at %d\n", ahc_name(ahc), ca->ca_intrline);
    212 
    213 	ahc->seep_config = malloc(sizeof(*ahc->seep_config),
    214 				  M_DEVBUF, M_NOWAIT);
    215 	if (ahc->seep_config == NULL)
    216 		return;
    217 
    218 	ahc_check_extport(ahc, &sxfrctl1);
    219 	/*
    220 	 * Take the LED out of diagnostic mode.
    221 	 */
    222 	sblkctl = ahc_inb(ahc, SBLKCTL);
    223 	ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));
    224 
    225 	/*
    226 	 * I don't know where this is set in the SEEPROM or by the
    227 	 * BIOS, so we default to 100%.
    228 	 */
    229 	ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100);
    230 
    231 	if (ahc->flags & AHC_USEDEFAULTS) {
    232 		int our_id;
    233 		/*
    234 		 * Assume only one connector and always turn
    235 		 * on termination.
    236 		 */
    237 		our_id = AHC_CARDBUS_DEFAULT_SCSI_ID;
    238 		sxfrctl1 = STPWEN;
    239 		ahc_outb(ahc, SCSICONF, our_id | ENSPCHK | RESET_SCSI);
    240 		ahc->our_id = our_id;
    241 	}
    242 
    243 	printf("%s: aic7860", ahc_name(ahc));
    244 
    245 	/*
    246 	 * Record our termination setting for the
    247 	 * generic initialization routine.
    248 	 */
    249         if ((sxfrctl1 & STPWEN) != 0)
    250 		ahc->flags |= AHC_TERM_ENB_A;
    251 
    252 	if (ahc_init(ahc)) {
    253 		ahc_free(ahc);
    254 		return;
    255 	}
    256 
    257 	ahc_attach(ahc);
    258 }
    259 
    260 int
    261 ahc_cardbus_detach(self, flags)
    262 	struct device *self;
    263 	int flags;
    264 {
    265 	struct ahc_cardbus_softc *csc = device_private(self);
    266 	struct ahc_softc *ahc = &csc->sc_ahc;
    267 
    268 	int rv;
    269 
    270 	rv = ahc_detach((void *)ahc, flags);
    271 	if (rv)
    272 		return rv;
    273 
    274 	if (ahc->ih) {
    275 		cardbus_intr_disestablish(csc->sc_ct->ct_cc,
    276 					  csc->sc_ct->ct_cf, ahc->ih);
    277 		ahc->ih = 0;
    278 	}
    279 
    280 	if (csc->sc_cbenable) {
    281 		if (csc->sc_cbenable == CARDBUS_MEM_ENABLE)
    282 			Cardbus_mapreg_unmap(csc->sc_ct, AHC_CARDBUS_MMBA,
    283 				ahc->tag, ahc->bsh, csc->sc_size);
    284 		else if (csc->sc_cbenable == CARDBUS_IO_ENABLE)
    285 			Cardbus_mapreg_unmap(csc->sc_ct, AHC_CARDBUS_IOBA,
    286 				ahc->tag, ahc->bsh, csc->sc_size);
    287 	csc->sc_cbenable = 0;
    288 	}
    289 
    290 	return (0);
    291 }
    292 
    293 
    294 int
    295 ahc_activate(struct device *self, enum devact act)
    296 {
    297 	struct ahc_cardbus_softc *csc = (void*)self;
    298 	struct ahc_softc *ahc = &csc->sc_ahc;
    299 	int s, rv = 0;
    300 
    301 	s = splhigh();
    302 	switch (act) {
    303 	case DVACT_ACTIVATE:
    304 		rv = EOPNOTSUPP;
    305 		break;
    306 
    307 	case DVACT_DEACTIVATE:
    308 		if (ahc->sc_child != NULL)
    309 			rv = config_deactivate(ahc->sc_child);
    310 		break;
    311 	}
    312 	splx(s);
    313 
    314 	return (rv);
    315 }
    316