Home | History | Annotate | Line # | Download | only in cardbus
ahc_cardbus.c revision 1.27
      1 /*	$NetBSD: ahc_cardbus.c,v 1.27 2009/05/05 09:51:23 cegger Exp $	*/
      2 
      3 /*-
      4  * Copyright (c) 2000, 2005 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
      9  * NASA Ames Research Center.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions and the following disclaimer.
     16  * 2. Redistributions in binary form must reproduce the above copyright
     17  *    notice, this list of conditions and the following disclaimer in the
     18  *    documentation and/or other materials provided with the distribution.
     19  *
     20  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     21  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     22  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     23  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     30  * POSSIBILITY OF SUCH DAMAGE.
     31  */
     32 
     33 /*
     34  * CardBus front-end for the Adaptec AIC-7xxx family of SCSI controllers.
     35  *
     36  * TODO:
     37  *	- power management
     38  */
     39 
     40 #include <sys/cdefs.h>
     41 __KERNEL_RCSID(0, "$NetBSD: ahc_cardbus.c,v 1.27 2009/05/05 09:51:23 cegger Exp $");
     42 
     43 #include "opt_ahc_cardbus.h"
     44 
     45 #include <sys/param.h>
     46 #include <sys/systm.h>
     47 #include <sys/malloc.h>
     48 #include <sys/kernel.h>
     49 #include <sys/queue.h>
     50 #include <sys/device.h>
     51 
     52 #include <sys/bus.h>
     53 #include <sys/intr.h>
     54 
     55 #include <dev/scsipi/scsi_all.h>
     56 #include <dev/scsipi/scsipi_all.h>
     57 #include <dev/scsipi/scsiconf.h>
     58 
     59 #include <dev/pci/pcireg.h>
     60 
     61 #include <dev/cardbus/cardbusvar.h>
     62 #include <dev/pci/pcidevs.h>
     63 
     64 #include <dev/ic/aic7xxx_osm.h>
     65 #include <dev/ic/aic7xxx_inline.h>
     66 
     67 
     68 #ifndef	AHC_CARDBUS_DEFAULT_SCSI_ID
     69 #define	AHC_CARDBUS_DEFAULT_SCSI_ID	0x7
     70 #endif
     71 
     72 #define	AHC_CARDBUS_IOBA	0x10
     73 #define	AHC_CARDBUS_MMBA	0x14
     74 
     75 struct ahc_cardbus_softc {
     76 	struct ahc_softc sc_ahc;	/* real AHC */
     77 
     78 	/* CardBus-specific goo. */
     79 	cardbus_devfunc_t sc_ct;	/* our CardBus devfuncs */
     80 	cardbus_intr_line_t sc_intrline; /* our interrupt line */
     81 	cardbustag_t sc_tag;
     82 
     83 	int	sc_cbenable;		/* what CardBus access type to enable */
     84 	int	sc_csr;			/* CSR bits */
     85 	bus_size_t sc_size;
     86 };
     87 
     88 int	ahc_cardbus_match(device_t, cfdata_t, void *);
     89 void	ahc_cardbus_attach(device_t, device_t, void *);
     90 int	ahc_cardbus_detach(device_t, int);
     91 int	ahc_activate(device_t self, enum devact act);
     92 
     93 CFATTACH_DECL_NEW(ahc_cardbus, sizeof(struct ahc_cardbus_softc),
     94     ahc_cardbus_match, ahc_cardbus_attach, ahc_cardbus_detach, ahc_activate);
     95 
     96 int
     97 ahc_cardbus_match(device_t parent, cfdata_t match, void *aux)
     98 {
     99 	struct cardbus_attach_args *ca = aux;
    100 
    101 	if (CARDBUS_VENDOR(ca->ca_id) == PCI_VENDOR_ADP &&
    102 	    CARDBUS_PRODUCT(ca->ca_id) == PCI_PRODUCT_ADP_APA1480)
    103 		return (1);
    104 
    105 	return (0);
    106 }
    107 
    108 void
    109 ahc_cardbus_attach(device_t parent, device_t self, void *aux)
    110 {
    111 	struct cardbus_attach_args *ca = aux;
    112 	struct ahc_cardbus_softc *csc = device_private(self);
    113 	struct ahc_softc *ahc = &csc->sc_ahc;
    114 	cardbus_devfunc_t ct = ca->ca_ct;
    115 	cardbus_chipset_tag_t cc = ct->ct_cc;
    116 	cardbus_function_tag_t cf = ct->ct_cf;
    117 	bus_space_tag_t bst;
    118 	bus_space_handle_t bsh;
    119 	pcireg_t reg;
    120 	u_int sxfrctl1 = 0;
    121 	u_char sblkctl;
    122 
    123 
    124 	ahc->sc_dev = self;
    125 	csc->sc_ct = ct;
    126 	csc->sc_tag = ca->ca_tag;
    127 	csc->sc_intrline = ca->ca_intrline;
    128 
    129 	printf(": Adaptec ADP-1480 SCSI\n");
    130 
    131 	/*
    132 	 * Map the device.
    133 	 */
    134 	csc->sc_csr = PCI_COMMAND_MASTER_ENABLE;
    135 	if (Cardbus_mapreg_map(csc->sc_ct, AHC_CARDBUS_MMBA,
    136 	    PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
    137 	    &bst, &bsh, NULL, &csc->sc_size) == 0) {
    138 		csc->sc_cbenable = CARDBUS_MEM_ENABLE;
    139 		csc->sc_csr |= PCI_COMMAND_MEM_ENABLE;
    140 	} else if (Cardbus_mapreg_map(csc->sc_ct, AHC_CARDBUS_IOBA,
    141 	    PCI_MAPREG_TYPE_IO, 0, &bst, &bsh, NULL, &csc->sc_size) == 0) {
    142 		csc->sc_cbenable = CARDBUS_IO_ENABLE;
    143 		csc->sc_csr |= PCI_COMMAND_IO_ENABLE;
    144 	} else {
    145 		printf("%s: unable to map device registers\n",
    146 		    ahc_name(ahc));
    147 		return;
    148 	}
    149 
    150 	/* Make sure the right access type is on the CardBus bridge. */
    151 	(*ct->ct_cf->cardbus_ctrl)(cc, csc->sc_cbenable);
    152 	(*ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_BM_ENABLE);
    153 
    154 	/* Enable the appropriate bits in the PCI CSR. */
    155 	reg = cardbus_conf_read(cc, cf, ca->ca_tag, PCI_COMMAND_STATUS_REG);
    156 	reg &= ~(PCI_COMMAND_IO_ENABLE|PCI_COMMAND_MEM_ENABLE);
    157 	reg |= csc->sc_csr;
    158 	cardbus_conf_write(cc, cf, ca->ca_tag, PCI_COMMAND_STATUS_REG, reg);
    159 
    160 	/*
    161 	 * Make sure the latency timer is set to some reasonable
    162 	 * value.
    163 	 */
    164 	reg = cardbus_conf_read(cc, cf, ca->ca_tag, PCI_BHLC_REG);
    165 	if (PCI_LATTIMER(reg) < 0x20) {
    166 		reg &= ~(PCI_LATTIMER_MASK << PCI_LATTIMER_SHIFT);
    167 		reg |= (0x20 << PCI_LATTIMER_SHIFT);
    168 		cardbus_conf_write(cc, cf, ca->ca_tag, PCI_BHLC_REG, reg);
    169 	}
    170 
    171 	ahc_set_name(ahc, device_xname(ahc->sc_dev));
    172 
    173 	ahc->parent_dmat = ca->ca_dmat;
    174 	ahc->tag = bst;
    175 	ahc->bsh = bsh;
    176 
    177 	/*
    178 	 * ADP-1480 is always an AIC-7860.
    179 	 */
    180 	ahc->chip = AHC_AIC7860 | AHC_PCI;
    181 	ahc->features = AHC_AIC7860_FE|AHC_REMOVABLE;
    182 	ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
    183 	if (PCI_REVISION(ca->ca_class) >= 1)
    184 		ahc->bugs |= AHC_PCI_2_1_RETRY_BUG;
    185 
    186 	if (ahc_softc_init(ahc) != 0)
    187 		return;
    188 
    189 	/*
    190 	 * On all CardBus adapters, we allow SCB paging.
    191 	 */
    192 	ahc->flags = AHC_PAGESCBS;
    193 
    194 	ahc->channel = 'A';
    195 
    196 	ahc_intr_enable(ahc, FALSE);
    197 
    198 	ahc_reset(ahc);
    199 
    200 	/*
    201 	 * Establish the interrupt.
    202 	 */
    203 	ahc->ih = cardbus_intr_establish(cc, cf, ca->ca_intrline, IPL_BIO,
    204 	    ahc_intr, ahc);
    205 	if (ahc->ih == NULL) {
    206 		printf("%s: unable to establish interrupt\n",
    207 		    ahc_name(ahc));
    208 		return;
    209 	}
    210 
    211 	ahc->seep_config = malloc(sizeof(*ahc->seep_config),
    212 				  M_DEVBUF, M_NOWAIT);
    213 	if (ahc->seep_config == NULL)
    214 		return;
    215 
    216 	ahc_check_extport(ahc, &sxfrctl1);
    217 	/*
    218 	 * Take the LED out of diagnostic mode.
    219 	 */
    220 	sblkctl = ahc_inb(ahc, SBLKCTL);
    221 	ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));
    222 
    223 	/*
    224 	 * I don't know where this is set in the SEEPROM or by the
    225 	 * BIOS, so we default to 100%.
    226 	 */
    227 	ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100);
    228 
    229 	if (ahc->flags & AHC_USEDEFAULTS) {
    230 		int our_id;
    231 		/*
    232 		 * Assume only one connector and always turn
    233 		 * on termination.
    234 		 */
    235 		our_id = AHC_CARDBUS_DEFAULT_SCSI_ID;
    236 		sxfrctl1 = STPWEN;
    237 		ahc_outb(ahc, SCSICONF, our_id | ENSPCHK | RESET_SCSI);
    238 		ahc->our_id = our_id;
    239 	}
    240 
    241 	printf("%s: aic7860", ahc_name(ahc));
    242 
    243 	/*
    244 	 * Record our termination setting for the
    245 	 * generic initialization routine.
    246 	 */
    247         if ((sxfrctl1 & STPWEN) != 0)
    248 		ahc->flags |= AHC_TERM_ENB_A;
    249 
    250 	if (ahc_init(ahc)) {
    251 		ahc_free(ahc);
    252 		return;
    253 	}
    254 
    255 	ahc_attach(ahc);
    256 }
    257 
    258 int
    259 ahc_cardbus_detach(device_t self, int flags)
    260 {
    261 	struct ahc_cardbus_softc *csc = device_private(self);
    262 	struct ahc_softc *ahc = &csc->sc_ahc;
    263 
    264 	int rv;
    265 
    266 	rv = ahc_detach((void *)ahc, flags);
    267 	if (rv)
    268 		return rv;
    269 
    270 	if (ahc->ih) {
    271 		cardbus_intr_disestablish(csc->sc_ct->ct_cc,
    272 					  csc->sc_ct->ct_cf, ahc->ih);
    273 		ahc->ih = 0;
    274 	}
    275 
    276 	if (csc->sc_cbenable) {
    277 		if (csc->sc_cbenable == CARDBUS_MEM_ENABLE)
    278 			Cardbus_mapreg_unmap(csc->sc_ct, AHC_CARDBUS_MMBA,
    279 				ahc->tag, ahc->bsh, csc->sc_size);
    280 		else if (csc->sc_cbenable == CARDBUS_IO_ENABLE)
    281 			Cardbus_mapreg_unmap(csc->sc_ct, AHC_CARDBUS_IOBA,
    282 				ahc->tag, ahc->bsh, csc->sc_size);
    283 	csc->sc_cbenable = 0;
    284 	}
    285 
    286 	return (0);
    287 }
    288 
    289 
    290 int
    291 ahc_activate(device_t self, enum devact act)
    292 {
    293 	struct ahc_cardbus_softc *csc = device_private(self);
    294 	struct ahc_softc *ahc = &csc->sc_ahc;
    295 	int s, rv = 0;
    296 
    297 	s = splhigh();
    298 	switch (act) {
    299 	case DVACT_ACTIVATE:
    300 		rv = EOPNOTSUPP;
    301 		break;
    302 
    303 	case DVACT_DEACTIVATE:
    304 		if (ahc->sc_child != NULL)
    305 			rv = config_deactivate(ahc->sc_child);
    306 		break;
    307 	}
    308 	splx(s);
    309 
    310 	return (rv);
    311 }
    312