if_rtk_cardbus.c revision 1.43
1 /* $NetBSD: if_rtk_cardbus.c,v 1.43 2010/02/26 00:57:02 dyoung Exp $ */ 2 3 /* 4 * Copyright (c) 2000 Masanori Kanaoka 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The name of the author may not be used to endorse or promote products 16 * derived from this software without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 23 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 /* 31 * if_rtk_cardbus.c: 32 * Cardbus specific routines for Realtek 8139 ethernet adapter. 33 * Tested for 34 * - elecom-Laneed LD-10/100CBA (Accton MPX5030) 35 * - MELCO LPC3-TX-CB (Realtek 8139) 36 */ 37 38 #include <sys/cdefs.h> 39 __KERNEL_RCSID(0, "$NetBSD: if_rtk_cardbus.c,v 1.43 2010/02/26 00:57:02 dyoung Exp $"); 40 41 #include "opt_inet.h" 42 #include "rnd.h" 43 44 #include <sys/param.h> 45 #include <sys/systm.h> 46 #include <sys/callout.h> 47 #include <sys/device.h> 48 #include <sys/sockio.h> 49 #include <sys/mbuf.h> 50 #include <sys/malloc.h> 51 #include <sys/kernel.h> 52 #include <sys/socket.h> 53 54 #include <net/if.h> 55 #include <net/if_arp.h> 56 #include <net/if_ether.h> 57 #include <net/if_dl.h> 58 #include <net/if_media.h> 59 #ifdef INET 60 #include <netinet/in.h> 61 #include <netinet/if_inarp.h> 62 #endif 63 64 #if NRND > 0 65 #include <sys/rnd.h> 66 #endif 67 68 #include <sys/bus.h> 69 70 #include <dev/pci/pcireg.h> 71 #include <dev/pci/pcivar.h> 72 #include <dev/pci/pcidevs.h> 73 74 #include <dev/cardbus/cardbusvar.h> 75 #include <dev/pci/pcidevs.h> 76 77 #include <dev/mii/mii.h> 78 #include <dev/mii/miivar.h> 79 80 /* 81 * Default to using PIO access for this driver. On SMP systems, 82 * there appear to be problems with memory mapped mode: it looks like 83 * doing too many memory mapped access back to back in rapid succession 84 * can hang the bus. I'm inclined to blame this on crummy design/construction 85 * on the part of Realtek. Memory mapped mode does appear to work on 86 * uniprocessor systems though. 87 */ 88 #define RTK_USEIOSPACE 89 90 #include <dev/ic/rtl81x9reg.h> 91 #include <dev/ic/rtl81x9var.h> 92 93 /* 94 * Various supported device vendors/types and their names. 95 */ 96 static const struct rtk_type rtk_cardbus_devs[] = { 97 { PCI_VENDOR_ACCTON, PCI_PRODUCT_ACCTON_MPX5030, 98 RTK_8139, "Accton MPX 5030/5038 10/100BaseTX" }, 99 { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DFE690TXD, 100 RTK_8139, "D-Link DFE-690TXD 10/100BaseTX" }, 101 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8138, 102 RTK_8139, "Realtek 8138 10/100BaseTX" }, 103 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8139, 104 RTK_8139, "Realtek 8139 10/100BaseTX" }, 105 { PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_CB_TXD, 106 RTK_8139, "Corega FEther CB-TXD 10/100BaseTX" }, 107 { PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_2CB_TXD, 108 RTK_8139, "Corega FEther II CB-TXD 10/100BaseTX" }, 109 { PCI_VENDOR_PLANEX, PCI_PRODUCT_PLANEX_FNW_3603_TX, 110 RTK_8139, "Planex FNW-3603 10/100BaseTX" }, 111 { PCI_VENDOR_PLANEX, PCI_PRODUCT_PLANEX_FNW_3800_TX, 112 RTK_8139, "Planex 10/100BaseTX FNW-3800-TX" }, 113 { PCI_VENDOR_ABOCOM, PCI_PRODUCT_ABOCOM_FE2000VX, 114 RTK_8139, "AboCom FE2000VX 10/100BaseTX" }, 115 116 { 0, 0, 0, NULL } 117 }; 118 119 static int rtk_cardbus_match(device_t, cfdata_t, void *); 120 static void rtk_cardbus_attach(device_t, device_t, void *); 121 static int rtk_cardbus_detach(device_t, int); 122 123 struct rtk_cardbus_softc { 124 struct rtk_softc sc_rtk; /* real rtk softc */ 125 126 /* CardBus-specific goo. */ 127 void *sc_ih; 128 cardbus_devfunc_t sc_ct; 129 pcitag_t sc_tag; 130 pcireg_t sc_csr; 131 int sc_bar_reg; 132 pcireg_t sc_bar_val; 133 bus_size_t sc_mapsize; 134 cardbus_intr_line_t sc_intrline; 135 }; 136 137 CFATTACH_DECL_NEW(rtk_cardbus, sizeof(struct rtk_cardbus_softc), 138 rtk_cardbus_match, rtk_cardbus_attach, rtk_cardbus_detach, rtk_activate); 139 140 const struct rtk_type *rtk_cardbus_lookup(const struct cardbus_attach_args *); 141 142 void rtk_cardbus_setup(struct rtk_cardbus_softc *); 143 144 int rtk_cardbus_enable(struct rtk_softc *); 145 void rtk_cardbus_disable(struct rtk_softc *); 146 void rtk_cardbus_power(struct rtk_softc *, int); 147 148 const struct rtk_type * 149 rtk_cardbus_lookup(const struct cardbus_attach_args *ca) 150 { 151 const struct rtk_type *t; 152 153 for (t = rtk_cardbus_devs; t->rtk_name != NULL; t++){ 154 if (PCI_VENDOR(ca->ca_id) == t->rtk_vid && 155 PCI_PRODUCT(ca->ca_id) == t->rtk_did) { 156 return t; 157 } 158 } 159 return NULL; 160 } 161 162 int 163 rtk_cardbus_match(device_t parent, cfdata_t cf, void *aux) 164 { 165 struct cardbus_attach_args *ca = aux; 166 167 if (rtk_cardbus_lookup(ca) != NULL) 168 return 1; 169 170 return 0; 171 } 172 173 174 void 175 rtk_cardbus_attach(device_t parent, device_t self, void *aux) 176 { 177 struct rtk_cardbus_softc *csc = device_private(self); 178 struct rtk_softc *sc = &csc->sc_rtk; 179 struct cardbus_attach_args *ca = aux; 180 cardbus_devfunc_t ct = ca->ca_ct; 181 const struct rtk_type *t; 182 bus_addr_t adr; 183 184 sc->sc_dev = self; 185 sc->sc_dmat = ca->ca_dmat; 186 csc->sc_ct = ct; 187 csc->sc_tag = ca->ca_tag; 188 csc->sc_intrline = ca->ca_intrline; 189 190 t = rtk_cardbus_lookup(ca); 191 if (t == NULL) { 192 aprint_error("\n"); 193 panic("%s: impossible", __func__); 194 } 195 aprint_normal(": %s\n", t->rtk_name); 196 197 /* 198 * Power management hooks. 199 */ 200 sc->sc_enable = rtk_cardbus_enable; 201 sc->sc_disable = rtk_cardbus_disable; 202 203 /* 204 * Map control/status registers. 205 */ 206 csc->sc_csr = PCI_COMMAND_MASTER_ENABLE; 207 #ifdef RTK_USEIOSPACE 208 if (Cardbus_mapreg_map(ct, RTK_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0, 209 &sc->rtk_btag, &sc->rtk_bhandle, &adr, &csc->sc_mapsize) == 0) { 210 #if rbus 211 #else 212 (*ct->ct_cf->cardbus_io_open)(cc, 0, adr, adr+csc->sc_mapsize); 213 #endif 214 csc->sc_csr |= PCI_COMMAND_IO_ENABLE; 215 csc->sc_bar_reg = RTK_PCI_LOIO; 216 csc->sc_bar_val = adr | PCI_MAPREG_TYPE_IO; 217 } 218 #else 219 if (Cardbus_mapreg_map(ct, RTK_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0, 220 &sc->rtk_btag, &sc->rtk_bhandle, &adr, &csc->sc_mapsize) == 0) { 221 #if rbus 222 #else 223 (*ct->ct_cf->cardbus_mem_open)(cc, 0, adr, adr+csc->sc_mapsize); 224 #endif 225 csc->sc_csr |= PCI_COMMAND_MEM_ENABLE; 226 csc->sc_bar_reg = RTK_PCI_LOMEM; 227 csc->sc_bar_val = adr | PCI_MAPREG_TYPE_MEM; 228 } 229 #endif 230 else { 231 aprint_error_dev(self, " unable to map deviceregisters\n"); 232 return; 233 } 234 /* 235 * Handle power management nonsense and initialize the 236 * configuration registers. 237 */ 238 rtk_cardbus_setup(csc); 239 240 rtk_attach(sc); 241 242 if (pmf_device_register(self, NULL, NULL)) 243 pmf_class_network_register(self, &sc->ethercom.ec_if); 244 else 245 aprint_error_dev(self, "couldn't establish power handler\n"); 246 247 /* 248 * Power down the socket. 249 */ 250 Cardbus_function_disable(csc->sc_ct); 251 } 252 253 int 254 rtk_cardbus_detach(device_t self, int flags) 255 { 256 struct rtk_cardbus_softc *csc = device_private(self); 257 struct rtk_softc *sc = &csc->sc_rtk; 258 struct cardbus_devfunc *ct = csc->sc_ct; 259 int rv; 260 261 #ifdef DIAGNOSTIC 262 if (ct == NULL) 263 panic("%s: data structure lacks", device_xname(self)); 264 #endif 265 rv = rtk_detach(sc); 266 if (rv) 267 return rv; 268 /* 269 * Unhook the interrupt handler. 270 */ 271 if (csc->sc_ih != NULL) 272 cardbus_intr_disestablish(ct->ct_cc, ct->ct_cf, csc->sc_ih); 273 274 /* 275 * Release bus space and close window. 276 */ 277 if (csc->sc_bar_reg != 0) 278 Cardbus_mapreg_unmap(ct, csc->sc_bar_reg, 279 sc->rtk_btag, sc->rtk_bhandle, csc->sc_mapsize); 280 281 return 0; 282 } 283 284 void 285 rtk_cardbus_setup(struct rtk_cardbus_softc *csc) 286 { 287 struct rtk_softc *sc = &csc->sc_rtk; 288 cardbus_devfunc_t ct = csc->sc_ct; 289 cardbus_chipset_tag_t cc = ct->ct_cc; 290 cardbus_function_tag_t cf = ct->ct_cf; 291 pcireg_t reg, command; 292 int pmreg; 293 294 /* 295 * Handle power management nonsense. 296 */ 297 if (cardbus_get_capability(cc, cf, csc->sc_tag, 298 PCI_CAP_PWRMGMT, &pmreg, 0)) { 299 command = Cardbus_conf_read(ct, csc->sc_tag, 300 pmreg + PCI_PMCSR); 301 if (command & PCI_PMCSR_STATE_MASK) { 302 pcireg_t iobase, membase, irq; 303 304 /* Save important PCI config data. */ 305 iobase = Cardbus_conf_read(ct, csc->sc_tag, 306 RTK_PCI_LOIO); 307 membase = Cardbus_conf_read(ct, csc->sc_tag, 308 RTK_PCI_LOMEM); 309 irq = Cardbus_conf_read(ct, csc->sc_tag, 310 PCI_INTERRUPT_REG); 311 312 /* Reset the power state. */ 313 aprint_normal_dev(sc->sc_dev, 314 "chip is in D%d power mode -- setting to D0\n", 315 command & PCI_PMCSR_STATE_MASK); 316 command &= ~PCI_PMCSR_STATE_MASK; 317 Cardbus_conf_write(ct, csc->sc_tag, 318 pmreg + PCI_PMCSR, command); 319 320 /* Restore PCI config data. */ 321 Cardbus_conf_write(ct, csc->sc_tag, 322 RTK_PCI_LOIO, iobase); 323 Cardbus_conf_write(ct, csc->sc_tag, 324 RTK_PCI_LOMEM, membase); 325 Cardbus_conf_write(ct, csc->sc_tag, 326 PCI_INTERRUPT_REG, irq); 327 } 328 } 329 330 /* Program the BAR */ 331 Cardbus_conf_write(ct, csc->sc_tag, csc->sc_bar_reg, csc->sc_bar_val); 332 333 /* Enable the appropriate bits in the CARDBUS CSR. */ 334 reg = Cardbus_conf_read(ct, csc->sc_tag, PCI_COMMAND_STATUS_REG); 335 reg &= ~(PCI_COMMAND_IO_ENABLE|PCI_COMMAND_MEM_ENABLE); 336 reg |= csc->sc_csr; 337 Cardbus_conf_write(ct, csc->sc_tag, PCI_COMMAND_STATUS_REG, reg); 338 339 /* 340 * Make sure the latency timer is set to some reasonable 341 * value. 342 */ 343 reg = Cardbus_conf_read(ct, csc->sc_tag, PCI_BHLC_REG); 344 if (PCI_LATTIMER(reg) < 0x20) { 345 reg &= ~(PCI_LATTIMER_MASK << PCI_LATTIMER_SHIFT); 346 reg |= (0x20 << PCI_LATTIMER_SHIFT); 347 Cardbus_conf_write(ct, csc->sc_tag, PCI_BHLC_REG, reg); 348 } 349 } 350 351 int 352 rtk_cardbus_enable(struct rtk_softc *sc) 353 { 354 struct rtk_cardbus_softc *csc = (struct rtk_cardbus_softc *)sc; 355 cardbus_devfunc_t ct = csc->sc_ct; 356 cardbus_chipset_tag_t cc = ct->ct_cc; 357 cardbus_function_tag_t cf = ct->ct_cf; 358 359 /* 360 * Power on the socket. 361 */ 362 Cardbus_function_enable(ct); 363 364 /* 365 * Set up the PCI configuration registers. 366 */ 367 rtk_cardbus_setup(csc); 368 369 /* 370 * Map and establish the interrupt. 371 */ 372 csc->sc_ih = cardbus_intr_establish(cc, cf, csc->sc_intrline, 373 IPL_NET, rtk_intr, sc); 374 if (csc->sc_ih == NULL) { 375 aprint_error_dev(sc->sc_dev, 376 "unable to establish interrupt\n"); 377 Cardbus_function_disable(csc->sc_ct); 378 return 1; 379 } 380 return 0; 381 } 382 383 void 384 rtk_cardbus_disable(struct rtk_softc *sc) 385 { 386 struct rtk_cardbus_softc *csc = (struct rtk_cardbus_softc *)sc; 387 cardbus_devfunc_t ct = csc->sc_ct; 388 cardbus_chipset_tag_t cc = ct->ct_cc; 389 cardbus_function_tag_t cf = ct->ct_cf; 390 391 /* Unhook the interrupt handler. */ 392 cardbus_intr_disestablish(cc, cf, csc->sc_ih); 393 csc->sc_ih = NULL; 394 395 /* Power down the socket. */ 396 Cardbus_function_disable(ct); 397 } 398
Indexes created Fri Oct 03 02:09:57 GMT 2025