dz.c revision 1.15
1 /* $NetBSD: dz.c,v 1.15 2004/04/25 06:23:41 matt Exp $ */ 2 /* 3 * Copyright (c) 1992, 1993 4 * The Regents of the University of California. All rights reserved. 5 * 6 * This code is derived from software contributed to Berkeley by 7 * Ralph Campbell and Rick Macklem. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 */ 33 34 /* 35 * Copyright (c) 1996 Ken C. Wellsch. All rights reserved. 36 * 37 * This code is derived from software contributed to Berkeley by 38 * Ralph Campbell and Rick Macklem. 39 * 40 * Redistribution and use in source and binary forms, with or without 41 * modification, are permitted provided that the following conditions 42 * are met: 43 * 1. Redistributions of source code must retain the above copyright 44 * notice, this list of conditions and the following disclaimer. 45 * 2. Redistributions in binary form must reproduce the above copyright 46 * notice, this list of conditions and the following disclaimer in the 47 * documentation and/or other materials provided with the distribution. 48 * 3. All advertising materials mentioning features or use of this software 49 * must display the following acknowledgement: 50 * This product includes software developed by the University of 51 * California, Berkeley and its contributors. 52 * 4. Neither the name of the University nor the names of its contributors 53 * may be used to endorse or promote products derived from this software 54 * without specific prior written permission. 55 * 56 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 57 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 58 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 59 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 60 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 61 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 62 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 63 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 64 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 65 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 66 * SUCH DAMAGE. 67 */ 68 69 #include <sys/cdefs.h> 70 __KERNEL_RCSID(0, "$NetBSD: dz.c,v 1.15 2004/04/25 06:23:41 matt Exp $"); 71 72 #include <sys/param.h> 73 #include <sys/systm.h> 74 #include <sys/callout.h> 75 #include <sys/ioctl.h> 76 #include <sys/tty.h> 77 #include <sys/proc.h> 78 #include <sys/buf.h> 79 #include <sys/conf.h> 80 #include <sys/file.h> 81 #include <sys/uio.h> 82 #include <sys/kernel.h> 83 #include <sys/syslog.h> 84 #include <sys/device.h> 85 86 #include <machine/bus.h> 87 88 #include <dev/dec/dzreg.h> 89 #include <dev/dec/dzvar.h> 90 91 #include <dev/cons.h> 92 93 #define DZ_READ_BYTE(adr) \ 94 bus_space_read_1(sc->sc_iot, sc->sc_ioh, sc->sc_dr.adr) 95 #define DZ_READ_WORD(adr) \ 96 bus_space_read_2(sc->sc_iot, sc->sc_ioh, sc->sc_dr.adr) 97 #define DZ_WRITE_BYTE(adr, val) \ 98 bus_space_write_1(sc->sc_iot, sc->sc_ioh, sc->sc_dr.adr, val) 99 #define DZ_WRITE_WORD(adr, val) \ 100 bus_space_write_2(sc->sc_iot, sc->sc_ioh, sc->sc_dr.adr, val) 101 #define DZ_BARRIER() \ 102 bus_space_barrier(sc->sc_iot, sc->sc_ioh, sc->sc_dr.dr_firstreg, \ 103 sc->sc_dr.dr_winsize, \ 104 BUS_SPACE_BARRIER_WRITE | BUS_SPACE_BARRIER_READ) 105 106 #include "ioconf.h" 107 108 /* Flags used to monitor modem bits, make them understood outside driver */ 109 110 #define DML_DTR TIOCM_DTR 111 #define DML_DCD TIOCM_CD 112 #define DML_RI TIOCM_RI 113 #define DML_BRK 0100000 /* no equivalent, we will mask */ 114 115 static const struct speedtab dzspeedtab[] = 116 { 117 { 0, 0 }, 118 { 50, DZ_LPR_B50 }, 119 { 75, DZ_LPR_B75 }, 120 { 110, DZ_LPR_B110 }, 121 { 134, DZ_LPR_B134 }, 122 { 150, DZ_LPR_B150 }, 123 { 300, DZ_LPR_B300 }, 124 { 600, DZ_LPR_B600 }, 125 { 1200, DZ_LPR_B1200 }, 126 { 1800, DZ_LPR_B1800 }, 127 { 2000, DZ_LPR_B2000 }, 128 { 2400, DZ_LPR_B2400 }, 129 { 3600, DZ_LPR_B3600 }, 130 { 4800, DZ_LPR_B4800 }, 131 { 7200, DZ_LPR_B7200 }, 132 { 9600, DZ_LPR_B9600 }, 133 { 19200, DZ_LPR_B19200 }, 134 { -1, -1 } 135 }; 136 137 static void dzstart(struct tty *); 138 static int dzparam(struct tty *, struct termios *); 139 static unsigned dzmctl(struct dz_softc *, int, int, int); 140 static void dzscan(void *); 141 142 dev_type_open(dzopen); 143 dev_type_close(dzclose); 144 dev_type_read(dzread); 145 dev_type_write(dzwrite); 146 dev_type_ioctl(dzioctl); 147 dev_type_stop(dzstop); 148 dev_type_tty(dztty); 149 dev_type_poll(dzpoll); 150 151 const struct cdevsw dz_cdevsw = { 152 dzopen, dzclose, dzread, dzwrite, dzioctl, 153 dzstop, dztty, dzpoll, nommap, ttykqfilter, D_TTY 154 }; 155 156 /* 157 * The DZ series doesn't interrupt on carrier transitions, 158 * so we have to use a timer to watch it. 159 */ 160 int dz_timer; /* true if timer started */ 161 struct callout dzscan_ch; 162 static struct cnm_state dz_cnm_state; 163 164 void 165 dzattach(struct dz_softc *sc, struct evcnt *parent_evcnt, int consline) 166 { 167 int n; 168 169 sc->sc_rxint = sc->sc_brk = 0; 170 sc->sc_consline = consline; 171 172 sc->sc_dr.dr_tcrw = sc->sc_dr.dr_tcr; 173 DZ_WRITE_WORD(dr_csr, DZ_CSR_MSE | DZ_CSR_RXIE | DZ_CSR_TXIE); 174 DZ_WRITE_BYTE(dr_dtr, 0); 175 DZ_WRITE_BYTE(dr_break, 0); 176 DZ_BARRIER(); 177 178 /* Initialize our softc structure. Should be done in open? */ 179 180 for (n = 0; n < sc->sc_type; n++) { 181 sc->sc_dz[n].dz_sc = sc; 182 sc->sc_dz[n].dz_line = n; 183 sc->sc_dz[n].dz_tty = ttymalloc(); 184 } 185 186 evcnt_attach_dynamic(&sc->sc_rintrcnt, EVCNT_TYPE_INTR, parent_evcnt, 187 sc->sc_dev.dv_xname, "rintr"); 188 evcnt_attach_dynamic(&sc->sc_tintrcnt, EVCNT_TYPE_INTR, parent_evcnt, 189 sc->sc_dev.dv_xname, "tintr"); 190 191 /* Console magic keys */ 192 cn_init_magic(&dz_cnm_state); 193 cn_set_magic("\047\001"); /* default magic is BREAK */ 194 /* VAX will change it in MD code */ 195 196 /* Alas no interrupt on modem bit changes, so we manually scan */ 197 198 if (dz_timer == 0) { 199 dz_timer = 1; 200 callout_init(&dzscan_ch); 201 callout_reset(&dzscan_ch, hz, dzscan, NULL); 202 } 203 printf("\n"); 204 } 205 206 /* Receiver Interrupt */ 207 208 void 209 dzrint(void *arg) 210 { 211 struct dz_softc *sc = arg; 212 struct tty *tp; 213 int cc, mcc, line; 214 unsigned c; 215 int overrun = 0; 216 217 sc->sc_rxint++; 218 219 while ((c = DZ_READ_WORD(dr_rbuf)) & DZ_RBUF_DATA_VALID) { 220 cc = c & 0xFF; 221 line = DZ_PORT(c>>8); 222 tp = sc->sc_dz[line].dz_tty; 223 224 /* Must be caught early */ 225 if (sc->sc_dz[line].dz_catch && 226 (*sc->sc_dz[line].dz_catch)(sc->sc_dz[line].dz_private, cc)) 227 continue; 228 229 if ((c & (DZ_RBUF_FRAMING_ERR | 0xff)) == DZ_RBUF_FRAMING_ERR) 230 mcc = CNC_BREAK; 231 else 232 mcc = cc; 233 234 cn_check_magic(tp->t_dev, mcc, dz_cnm_state); 235 236 if (!(tp->t_state & TS_ISOPEN)) { 237 wakeup((caddr_t)&tp->t_rawq); 238 continue; 239 } 240 241 if ((c & DZ_RBUF_OVERRUN_ERR) && overrun == 0) { 242 log(LOG_WARNING, "%s: silo overflow, line %d\n", 243 sc->sc_dev.dv_xname, line); 244 overrun = 1; 245 } 246 247 if (c & DZ_RBUF_FRAMING_ERR) 248 cc |= TTY_FE; 249 if (c & DZ_RBUF_PARITY_ERR) 250 cc |= TTY_PE; 251 252 (*tp->t_linesw->l_rint)(cc, tp); 253 } 254 } 255 256 /* Transmitter Interrupt */ 257 258 void 259 dzxint(void *arg) 260 { 261 struct dz_softc *sc = arg; 262 struct tty *tp; 263 struct clist *cl; 264 int line, ch, csr; 265 u_char tcr; 266 267 /* 268 * Switch to POLLED mode. 269 * Some simple measurements indicated that even on 270 * one port, by freeing the scanner in the controller 271 * by either providing a character or turning off 272 * the port when output is complete, the transmitter 273 * was ready to accept more output when polled again. 274 * With just two ports running the game "worms," 275 * almost every interrupt serviced both transmitters! 276 * Each UART is double buffered, so if the scanner 277 * is quick enough and timing works out, we can even 278 * feed the same port twice. 279 * 280 * Ragge 980517: 281 * Do not need to turn off interrupts, already at interrupt level. 282 * Remove the pdma stuff; no great need of it right now. 283 */ 284 285 while (((csr = DZ_READ_WORD(dr_csr)) & DZ_CSR_TX_READY) != 0) { 286 287 line = DZ_PORT(csr>>8); 288 289 tp = sc->sc_dz[line].dz_tty; 290 cl = &tp->t_outq; 291 tp->t_state &= ~TS_BUSY; 292 293 /* Just send out a char if we have one */ 294 /* As long as we can fill the chip buffer, we just loop here */ 295 if (cl->c_cc) { 296 tp->t_state |= TS_BUSY; 297 ch = getc(cl); 298 DZ_WRITE_BYTE(dr_tbuf, ch); 299 DZ_BARRIER(); 300 continue; 301 } 302 /* Nothing to send; clear the scan bit */ 303 /* Clear xmit scanner bit; dzstart may set it again */ 304 tcr = DZ_READ_WORD(dr_tcrw); 305 tcr &= 255; 306 tcr &= ~(1 << line); 307 DZ_WRITE_BYTE(dr_tcr, tcr); 308 DZ_BARRIER(); 309 if (sc->sc_dz[line].dz_catch) 310 continue; 311 312 if (tp->t_state & TS_FLUSH) 313 tp->t_state &= ~TS_FLUSH; 314 else 315 ndflush (&tp->t_outq, cl->c_cc); 316 317 (*tp->t_linesw->l_start)(tp); 318 } 319 } 320 321 int 322 dzopen(dev_t dev, int flag, int mode, struct proc *p) 323 { 324 struct tty *tp; 325 int unit, line; 326 struct dz_softc *sc; 327 int s, error = 0; 328 329 unit = DZ_I2C(minor(dev)); 330 line = DZ_PORT(minor(dev)); 331 if (unit >= dz_cd.cd_ndevs || dz_cd.cd_devs[unit] == NULL) 332 return (ENXIO); 333 334 sc = dz_cd.cd_devs[unit]; 335 336 if (line >= sc->sc_type) 337 return ENXIO; 338 339 /* if some other device is using the line, it's busy */ 340 if (sc->sc_dz[line].dz_catch) 341 return EBUSY; 342 343 tp = sc->sc_dz[line].dz_tty; 344 if (tp == NULL) 345 return (ENODEV); 346 tp->t_oproc = dzstart; 347 tp->t_param = dzparam; 348 tp->t_dev = dev; 349 if ((tp->t_state & TS_ISOPEN) == 0) { 350 ttychars(tp); 351 if (tp->t_ispeed == 0) { 352 tp->t_iflag = TTYDEF_IFLAG; 353 tp->t_oflag = TTYDEF_OFLAG; 354 tp->t_cflag = TTYDEF_CFLAG; 355 tp->t_lflag = TTYDEF_LFLAG; 356 tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED; 357 } 358 (void) dzparam(tp, &tp->t_termios); 359 ttsetwater(tp); 360 } else if ((tp->t_state & TS_XCLUDE) && p->p_ucred->cr_uid != 0) 361 return (EBUSY); 362 /* Use DMBIS and *not* DMSET or else we clobber incoming bits */ 363 if (dzmctl(sc, line, DML_DTR, DMBIS) & DML_DCD) 364 tp->t_state |= TS_CARR_ON; 365 s = spltty(); 366 while (!(flag & O_NONBLOCK) && !(tp->t_cflag & CLOCAL) && 367 !(tp->t_state & TS_CARR_ON)) { 368 tp->t_wopen++; 369 error = ttysleep(tp, (caddr_t)&tp->t_rawq, 370 TTIPRI | PCATCH, ttopen, 0); 371 tp->t_wopen--; 372 if (error) 373 break; 374 } 375 (void) splx(s); 376 if (error) 377 return (error); 378 return ((*tp->t_linesw->l_open)(dev, tp)); 379 } 380 381 /*ARGSUSED*/ 382 int 383 dzclose(dev_t dev, int flag, int mode, struct proc *p) 384 { 385 struct dz_softc *sc; 386 struct tty *tp; 387 int unit, line; 388 389 390 unit = DZ_I2C(minor(dev)); 391 line = DZ_PORT(minor(dev)); 392 sc = dz_cd.cd_devs[unit]; 393 394 tp = sc->sc_dz[line].dz_tty; 395 396 (*tp->t_linesw->l_close)(tp, flag); 397 398 /* Make sure a BREAK state is not left enabled. */ 399 (void) dzmctl(sc, line, DML_BRK, DMBIC); 400 401 /* Do a hangup if so required. */ 402 if ((tp->t_cflag & HUPCL) || tp->t_wopen || !(tp->t_state & TS_ISOPEN)) 403 (void) dzmctl(sc, line, 0, DMSET); 404 405 return (ttyclose(tp)); 406 } 407 408 int 409 dzread(dev_t dev, struct uio *uio, int flag) 410 { 411 struct tty *tp; 412 struct dz_softc *sc; 413 414 sc = dz_cd.cd_devs[DZ_I2C(minor(dev))]; 415 416 tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty; 417 return ((*tp->t_linesw->l_read)(tp, uio, flag)); 418 } 419 420 int 421 dzwrite(dev_t dev, struct uio *uio, int flag) 422 { 423 struct tty *tp; 424 struct dz_softc *sc; 425 426 sc = dz_cd.cd_devs[DZ_I2C(minor(dev))]; 427 428 tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty; 429 return ((*tp->t_linesw->l_write)(tp, uio, flag)); 430 } 431 432 int 433 dzpoll(dev, events, p) 434 dev_t dev; 435 int events; 436 struct proc *p; 437 { 438 struct tty *tp; 439 struct dz_softc *sc; 440 441 sc = dz_cd.cd_devs[DZ_I2C(minor(dev))]; 442 443 tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty; 444 return ((*tp->t_linesw->l_poll)(tp, events, p)); 445 } 446 447 /*ARGSUSED*/ 448 int 449 dzioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p) 450 { 451 struct dz_softc *sc; 452 struct tty *tp; 453 int unit, line; 454 int error; 455 456 unit = DZ_I2C(minor(dev)); 457 line = DZ_PORT(minor(dev)); 458 sc = dz_cd.cd_devs[unit]; 459 tp = sc->sc_dz[line].dz_tty; 460 461 error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, p); 462 if (error >= 0) 463 return (error); 464 465 error = ttioctl(tp, cmd, data, flag, p); 466 if (error >= 0) 467 return (error); 468 469 switch (cmd) { 470 471 case TIOCSBRK: 472 (void) dzmctl(sc, line, DML_BRK, DMBIS); 473 break; 474 475 case TIOCCBRK: 476 (void) dzmctl(sc, line, DML_BRK, DMBIC); 477 break; 478 479 case TIOCSDTR: 480 (void) dzmctl(sc, line, DML_DTR, DMBIS); 481 break; 482 483 case TIOCCDTR: 484 (void) dzmctl(sc, line, DML_DTR, DMBIC); 485 break; 486 487 case TIOCMSET: 488 (void) dzmctl(sc, line, *(int *)data, DMSET); 489 break; 490 491 case TIOCMBIS: 492 (void) dzmctl(sc, line, *(int *)data, DMBIS); 493 break; 494 495 case TIOCMBIC: 496 (void) dzmctl(sc, line, *(int *)data, DMBIC); 497 break; 498 499 case TIOCMGET: 500 *(int *)data = (dzmctl(sc, line, 0, DMGET) & ~DML_BRK); 501 break; 502 503 default: 504 return (EPASSTHROUGH); 505 } 506 return (0); 507 } 508 509 struct tty * 510 dztty(dev_t dev) 511 { 512 struct dz_softc *sc = dz_cd.cd_devs[DZ_I2C(minor(dev))]; 513 struct tty *tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty; 514 515 return (tp); 516 } 517 518 /*ARGSUSED*/ 519 void 520 dzstop(struct tty *tp, int flag) 521 { 522 if (tp->t_state & TS_BUSY) 523 if (!(tp->t_state & TS_TTSTOP)) 524 tp->t_state |= TS_FLUSH; 525 } 526 527 void 528 dzstart(struct tty *tp) 529 { 530 struct dz_softc *sc; 531 struct clist *cl; 532 int unit, line, s; 533 char state; 534 535 unit = DZ_I2C(minor(tp->t_dev)); 536 line = DZ_PORT(minor(tp->t_dev)); 537 sc = dz_cd.cd_devs[unit]; 538 539 s = spltty(); 540 if (tp->t_state & (TS_TIMEOUT|TS_BUSY|TS_TTSTOP)) { 541 splx(s); 542 return; 543 } 544 cl = &tp->t_outq; 545 if (cl->c_cc <= tp->t_lowat) { 546 if (tp->t_state & TS_ASLEEP) { 547 tp->t_state &= ~TS_ASLEEP; 548 wakeup((caddr_t)cl); 549 } 550 selwakeup(&tp->t_wsel); 551 } 552 if (cl->c_cc == 0) { 553 splx(s); 554 return; 555 } 556 557 tp->t_state |= TS_BUSY; 558 559 state = DZ_READ_WORD(dr_tcrw) & 255; 560 if ((state & (1 << line)) == 0) { 561 DZ_WRITE_BYTE(dr_tcr, state | (1 << line)); 562 DZ_BARRIER(); 563 } 564 dzxint(sc); 565 splx(s); 566 } 567 568 static int 569 dzparam(struct tty *tp, struct termios *t) 570 { 571 struct dz_softc *sc; 572 int cflag = t->c_cflag; 573 int unit, line; 574 int ispeed = ttspeedtab(t->c_ispeed, dzspeedtab); 575 int ospeed = ttspeedtab(t->c_ospeed, dzspeedtab); 576 unsigned lpr; 577 int s; 578 579 unit = DZ_I2C(minor(tp->t_dev)); 580 line = DZ_PORT(minor(tp->t_dev)); 581 sc = dz_cd.cd_devs[unit]; 582 583 /* check requested parameters */ 584 if (ospeed < 0 || ispeed < 0 || ispeed != ospeed) 585 return (EINVAL); 586 587 tp->t_ispeed = t->c_ispeed; 588 tp->t_ospeed = t->c_ospeed; 589 tp->t_cflag = cflag; 590 591 if (ospeed == 0) { 592 (void) dzmctl(sc, line, 0, DMSET); /* hang up line */ 593 return (0); 594 } 595 596 s = spltty(); 597 598 lpr = DZ_LPR_RX_ENABLE | ((ispeed&0xF)<<8) | line; 599 600 switch (cflag & CSIZE) 601 { 602 case CS5: 603 lpr |= DZ_LPR_5_BIT_CHAR; 604 break; 605 case CS6: 606 lpr |= DZ_LPR_6_BIT_CHAR; 607 break; 608 case CS7: 609 lpr |= DZ_LPR_7_BIT_CHAR; 610 break; 611 default: 612 lpr |= DZ_LPR_8_BIT_CHAR; 613 break; 614 } 615 if (cflag & PARENB) 616 lpr |= DZ_LPR_PARENB; 617 if (cflag & PARODD) 618 lpr |= DZ_LPR_OPAR; 619 if (cflag & CSTOPB) 620 lpr |= DZ_LPR_2_STOP; 621 622 DZ_WRITE_WORD(dr_lpr, lpr); 623 DZ_BARRIER(); 624 625 (void) splx(s); 626 return (0); 627 } 628 629 static unsigned 630 dzmctl(struct dz_softc *sc, int line, int bits, int how) 631 { 632 unsigned status; 633 unsigned mbits; 634 unsigned bit; 635 int s; 636 637 s = spltty(); 638 639 mbits = 0; 640 641 bit = (1 << line); 642 643 /* external signals as seen from the port */ 644 645 status = DZ_READ_BYTE(dr_dcd) | sc->sc_dsr; 646 647 if (status & bit) 648 mbits |= DML_DCD; 649 650 status = DZ_READ_BYTE(dr_ring); 651 652 if (status & bit) 653 mbits |= DML_RI; 654 655 /* internal signals/state delivered to port */ 656 657 status = DZ_READ_BYTE(dr_dtr); 658 659 if (status & bit) 660 mbits |= DML_DTR; 661 662 if (sc->sc_brk & bit) 663 mbits |= DML_BRK; 664 665 switch (how) 666 { 667 case DMSET: 668 mbits = bits; 669 break; 670 671 case DMBIS: 672 mbits |= bits; 673 break; 674 675 case DMBIC: 676 mbits &= ~bits; 677 break; 678 679 case DMGET: 680 (void) splx(s); 681 return (mbits); 682 } 683 684 if (mbits & DML_DTR) { 685 DZ_WRITE_BYTE(dr_dtr, DZ_READ_BYTE(dr_dtr) | bit); 686 } else { 687 DZ_WRITE_BYTE(dr_dtr, DZ_READ_BYTE(dr_dtr) & ~bit); 688 } 689 690 if (mbits & DML_BRK) { 691 sc->sc_brk |= bit; 692 DZ_WRITE_BYTE(dr_break, sc->sc_brk); 693 } else { 694 sc->sc_brk &= ~bit; 695 DZ_WRITE_BYTE(dr_break, sc->sc_brk); 696 } 697 698 DZ_BARRIER(); 699 (void) splx(s); 700 return (mbits); 701 } 702 703 /* 704 * This is called by timeout() periodically. 705 * Check to see if modem status bits have changed. 706 */ 707 static void 708 dzscan(void *arg) 709 { 710 struct dz_softc *sc; 711 struct tty *tp; 712 int n, bit, port; 713 unsigned csr; 714 int s; 715 716 s = spltty(); 717 718 for (n = 0; n < dz_cd.cd_ndevs; n++) { 719 720 if (dz_cd.cd_devs[n] == NULL) 721 continue; 722 723 sc = dz_cd.cd_devs[n]; 724 725 for (port = 0; port < sc->sc_type; port++) { 726 727 tp = sc->sc_dz[port].dz_tty; 728 bit = (1 << port); 729 730 if ((DZ_READ_BYTE(dr_dcd) | sc->sc_dsr) & bit) { 731 if (!(tp->t_state & TS_CARR_ON)) 732 (*tp->t_linesw->l_modem) (tp, 1); 733 } else if ((tp->t_state & TS_CARR_ON) && 734 (*tp->t_linesw->l_modem)(tp, 0) == 0) { 735 DZ_WRITE_BYTE(dr_tcr, 736 (DZ_READ_WORD(dr_tcrw) & 255) & ~bit); 737 DZ_BARRIER(); 738 } 739 } 740 741 /* 742 * If the RX interrupt rate is this high, switch 743 * the controller to Silo Alarm - which means don't 744 * interrupt until the RX silo has 16 characters in 745 * it (the silo is 64 characters in all). 746 * Avoid oscillating SA on and off by not turning 747 * if off unless the rate is appropriately low. 748 */ 749 750 csr = DZ_READ_WORD(dr_csr); 751 752 if (sc->sc_rxint > (16*10)) { 753 if ((csr & DZ_CSR_SAE) == 0) 754 DZ_WRITE_WORD(dr_csr, csr | DZ_CSR_SAE); 755 } else if ((csr & DZ_CSR_SAE) != 0) 756 if (sc->sc_rxint < 10) 757 DZ_WRITE_WORD(dr_csr, csr & ~(DZ_CSR_SAE)); 758 759 DZ_BARRIER(); 760 sc->sc_rxint = 0; 761 } 762 (void) splx(s); 763 callout_reset(&dzscan_ch, hz, dzscan, NULL); 764 } 765 766 /* 767 * Called after an ubareset. The DZ card is reset, but the only thing 768 * that must be done is to start the receiver and transmitter again. 769 * No DMA setup to care about. 770 */ 771 void 772 dzreset(struct device *dev) 773 { 774 struct dz_softc *sc = (void *)dev; 775 struct tty *tp; 776 int i; 777 778 for (i = 0; i < sc->sc_type; i++) { 779 tp = sc->sc_dz[i].dz_tty; 780 781 if (((tp->t_state & TS_ISOPEN) == 0) || (tp->t_wopen == 0)) 782 continue; 783 784 dzparam(tp, &tp->t_termios); 785 dzmctl(sc, i, DML_DTR, DMSET); 786 tp->t_state &= ~TS_BUSY; 787 dzstart(tp); /* Kick off transmitter again */ 788 } 789 } 790
Indexes created Wed Sep 24 05:09:52 GMT 2025