netbsd-dm.h revision 1.8.6.1 1 /* $NetBSD: netbsd-dm.h,v 1.8.6.1 2020/04/08 14:08:03 martin Exp $ */
2
3 /*
4 * Copyright (c) 2008 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Adam Hamsik.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
30 */
31
32 #ifndef __NETBSD_DM_H__
33 #define __NETBSD_DM_H__
34
35 #include <sys/ioccom.h>
36 #include <prop/proplib.h>
37
38 #define DM_IOCTL 0xfd
39
40 #define DM_IOCTL_CMD 0
41
42 #define NETBSD_DM_IOCTL _IOWR(DM_IOCTL, DM_IOCTL_CMD, struct plistref)
43
44
45 /*
46 * DM-ioctl dictionary.
47 *
48 * This contains general information about dm device.
49 *
50 * <dict>
51 * <key>command</key>
52 * <string>...</string>
53 *
54 * <key>event_nr</key>
55 * <integer>...</integer>
56 *
57 * <key>name</key>
58 * <string>...</string>
59 *
60 * <key>uuid</key>
61 * <string>...</string>
62 *
63 * <key>dev</key>
64 * <integer></integer>
65 *
66 * <key>flags</key>
67 * <integer></integer>
68 *
69 * <key>version</key>
70 * <array>
71 * <integer>...</integer>
72 * <integer>...</integer>
73 * <integer>...</integer>
74 * </array>
75 *
76 * <key>cmd_data</key>
77 * <array>
78 * <!-- See below for command
79 * specific dictionaries -->
80 * </array>
81 * </dict>
82 *
83 * Available commands from _cmd_data_v4.
84 *
85 * create, reload, remove, remove_all, suspend,
86 * resume, info, deps, rename, version, status,
87 * table, waitevent, names, clear, mknodes,
88 * targets, message, setgeometry
89 *
90 */
91
92 /*
93 * DM_LIST_VERSIONS == "targets" command dictionary entry.
94 * Lists all available targets with their version.
95 *
96 * <array>
97 * <dict>
98 * <key>name<key>
99 * <string>...</string>
100 *
101 * <key>version</key>
102 * <array>
103 * <integer>...</integer>
104 * <integer>...</integer>
105 * <integer>...</integer>
106 * </array>
107 * </dict>
108 * </array>
109 *
110 */
111
112 /*
113 * DM_DEV_LIST == "names"
114 * Request list of device-mapper created devices from kernel.
115 *
116 * <array>
117 * <dict>
118 * <key>name<key>
119 * <string>...</string>
120 *
121 * <key>dev</key>
122 * <integer>...</integer>
123 * </dict>
124 * </array>
125 *
126 * dev is uint64_t
127 *
128 */
129
130 /*
131 * DM_DEV_RENAME == "rename"
132 * Rename device to string.
133 *
134 * <array>
135 * <string>...</string>
136 * </array>
137 *
138 */
139
140 /*
141 * DM_DEV_STATUS == "info, mknodes"
142 * Will change fields DM_IOCTL_OPEN, DM_IOCTL_DEV in received dictionary,
143 * with dm device values with name or uuid from list.
144 *
145 */
146
147 /*
148 * DM_TABLE_STATUS == "status,table"
149 * Request list of device-mapper created devices from kernel.
150 *
151 * <array>
152 * <dict>
153 * <key>type<key>
154 * <string>...</string>
155 *
156 * <key>start</key>
157 * <integer>...</integer>
158 *
159 * <key>length</key>
160 * <integer>...</integer>
161 *
162 * <key>params</key>
163 * <string>...</string>
164 * </dict>
165 * </array>
166 *
167 * params is string which contains {device} {parameters}
168 *
169 */
170
171 /*
172 * DM_TABLE_DEPS == "deps"
173 * Request list active table device dependencies.
174 *
175 * This command is also run to get dm-device
176 * dependencies for existing real block device.
177 *
178 * eg. vgcreate calls DM_TABLE_DEPS
179 *
180 * <array>
181 * <integer>...</integer>
182 * </array>
183 *
184 */
185
186
187 #define DM_IOCTL_COMMAND "command"
188 #define DM_IOCTL_VERSION "version"
189 #define DM_IOCTL_OPEN "open_count"
190 #define DM_IOCTL_MINOR "minor"
191 #define DM_IOCTL_NAME "name"
192 #define DM_IOCTL_UUID "uuid"
193 #define DM_IOCTL_TARGET_COUNT "target_count"
194 #define DM_IOCTL_EVENT "event_nr"
195 #define DM_IOCTL_FLAGS "flags"
196 #define DM_IOCTL_CMD_DATA "cmd_data"
197
198 #define DM_TARGETS_NAME "name"
199 #define DM_TARGETS_VERSION "ver"
200
201 #define DM_DEV_NEWNAME "newname"
202 #define DM_DEV_NAME "name"
203 #define DM_DEV_DEV "dev"
204
205 #define DM_TABLE_TYPE "type"
206 #define DM_TABLE_START "start"
207 #define DM_TABLE_STAT "status"
208 #define DM_TABLE_LENGTH "length"
209 #define DM_TABLE_PARAMS "params"
210 //#ifndef __LIB_DEVMAPPER__
211 //#define DM_TABLE_DEPS "deps"
212 //#endif
213
214 /* Status bits */
215 /* IO mode of device */
216 #define DM_READONLY_FLAG (1 << 0) /* In/Out *//* to kernel/from kernel */
217 #define DM_SUSPEND_FLAG (1 << 1) /* In/Out */
218 /* XXX. This flag is undocumented. */
219 #define DM_EXISTS_FLAG (1 << 2) /* In/Out */
220 /* Minor number is persistent */
221 #define DM_PERSISTENT_DEV_FLAG (1 << 3) /* In */
222
223 /*
224 * Flag passed into ioctl STATUS command to get table information
225 * rather than current status.
226 */
227 #define DM_STATUS_TABLE_FLAG (1 << 4) /* In */
228
229 /*
230 * Flags that indicate whether a table is present in either of
231 * the two table slots that a device has.
232 */
233 #define DM_ACTIVE_PRESENT_FLAG (1 << 5) /* Out */
234 #define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
235
236 /*
237 * Indicates that the buffer passed in wasn't big enough for the
238 * results.
239 */
240 #define DM_BUFFER_FULL_FLAG (1 << 8) /* Out */
241
242 /*
243 * This flag is now ignored.
244 */
245 #define DM_SKIP_BDGET_FLAG (1 << 9) /* In */
246
247 /*
248 * Set this to avoid attempting to freeze any filesystem when suspending.
249 */
250 #define DM_SKIP_LOCKFS_FLAG (1 << 10) /* In */
251
252 /*
253 * Set this to suspend without flushing queued ios.
254 */
255 #define DM_NOFLUSH_FLAG (1 << 11) /* In */
256
257 /*
258 * If set, any table information returned will relate to the inactive
259 * table instead of the live one. Always check DM_INACTIVE_PRESENT_FLAG
260 * is set before using the data returned.
261 */
262 #define DM_QUERY_INACTIVE_TABLE_FLAG (1 << 12) /* In */
263
264 #endif /* __NETBSD_DM_H__ */
265