Home | History | Annotate | Line # | Download | only in gpio
gpioiic.c revision 1.6
      1  1.6      chs /* $NetBSD: gpioiic.c,v 1.6 2012/10/27 17:18:16 chs Exp $ */
      2  1.1  mbalmer /*	$OpenBSD: gpioiic.c,v 1.8 2008/11/24 12:12:12 mbalmer Exp $	*/
      3  1.1  mbalmer 
      4  1.1  mbalmer /*
      5  1.1  mbalmer  * Copyright (c) 2006 Alexander Yurchenko <grange (at) openbsd.org>
      6  1.1  mbalmer  *
      7  1.1  mbalmer  * Permission to use, copy, modify, and distribute this software for any
      8  1.1  mbalmer  * purpose with or without fee is hereby granted, provided that the above
      9  1.1  mbalmer  * copyright notice and this permission notice appear in all copies.
     10  1.1  mbalmer  *
     11  1.1  mbalmer  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
     12  1.1  mbalmer  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
     13  1.1  mbalmer  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
     14  1.1  mbalmer  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     15  1.1  mbalmer  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     16  1.1  mbalmer  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
     17  1.1  mbalmer  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
     18  1.1  mbalmer  */
     19  1.1  mbalmer 
     20  1.1  mbalmer #include <sys/cdefs.h>
     21  1.6      chs __KERNEL_RCSID(0, "$NetBSD: gpioiic.c,v 1.6 2012/10/27 17:18:16 chs Exp $");
     22  1.1  mbalmer 
     23  1.1  mbalmer /*
     24  1.1  mbalmer  * I2C bus bit-banging through GPIO pins.
     25  1.1  mbalmer  */
     26  1.1  mbalmer 
     27  1.1  mbalmer #include <sys/param.h>
     28  1.1  mbalmer #include <sys/systm.h>
     29  1.1  mbalmer #include <sys/device.h>
     30  1.1  mbalmer #include <sys/gpio.h>
     31  1.1  mbalmer #include <sys/rwlock.h>
     32  1.5  mbalmer #include <sys/module.h>
     33  1.1  mbalmer 
     34  1.1  mbalmer #include <dev/gpio/gpiovar.h>
     35  1.1  mbalmer 
     36  1.1  mbalmer #include <dev/i2c/i2cvar.h>
     37  1.1  mbalmer #include <dev/i2c/i2c_bitbang.h>
     38  1.1  mbalmer 
     39  1.1  mbalmer #define GPIOIIC_PIN_SDA		0
     40  1.1  mbalmer #define GPIOIIC_PIN_SCL		1
     41  1.1  mbalmer #define GPIOIIC_NPINS		2
     42  1.1  mbalmer 
     43  1.1  mbalmer #define GPIOIIC_SDA		0x01
     44  1.1  mbalmer #define GPIOIIC_SCL		0x02
     45  1.1  mbalmer 
     46  1.5  mbalmer #define GPIOIIC_PIN_REVERSE	0x01
     47  1.5  mbalmer 
     48  1.1  mbalmer struct gpioiic_softc {
     49  1.1  mbalmer 	void *			sc_gpio;
     50  1.1  mbalmer 	struct gpio_pinmap	sc_map;
     51  1.1  mbalmer 	int			_map[GPIOIIC_NPINS];
     52  1.1  mbalmer 
     53  1.1  mbalmer 	struct i2c_controller	sc_i2c_tag;
     54  1.1  mbalmer 	device_t		sc_i2c_dev;
     55  1.1  mbalmer 	krwlock_t		sc_i2c_lock;
     56  1.1  mbalmer 
     57  1.5  mbalmer 	int			sc_pin_sda;
     58  1.5  mbalmer 	int			sc_pin_scl;
     59  1.5  mbalmer 
     60  1.1  mbalmer 	int			sc_sda;
     61  1.1  mbalmer 	int			sc_scl;
     62  1.1  mbalmer };
     63  1.1  mbalmer 
     64  1.1  mbalmer int		gpioiic_match(device_t, cfdata_t, void *);
     65  1.1  mbalmer void		gpioiic_attach(device_t, device_t, void *);
     66  1.1  mbalmer int		gpioiic_detach(device_t, int);
     67  1.1  mbalmer 
     68  1.1  mbalmer int		gpioiic_i2c_acquire_bus(void *, int);
     69  1.1  mbalmer void		gpioiic_i2c_release_bus(void *, int);
     70  1.1  mbalmer int		gpioiic_i2c_send_start(void *, int);
     71  1.1  mbalmer int		gpioiic_i2c_send_stop(void *, int);
     72  1.1  mbalmer int		gpioiic_i2c_initiate_xfer(void *, i2c_addr_t, int);
     73  1.4  mbalmer int		gpioiic_i2c_read_byte(void *, uint8_t *, int);
     74  1.4  mbalmer int		gpioiic_i2c_write_byte(void *, uint8_t, int);
     75  1.1  mbalmer 
     76  1.4  mbalmer void		gpioiic_bb_set_bits(void *, uint32_t);
     77  1.4  mbalmer void		gpioiic_bb_set_dir(void *, uint32_t);
     78  1.4  mbalmer uint32_t	gpioiic_bb_read_bits(void *);
     79  1.1  mbalmer 
     80  1.1  mbalmer CFATTACH_DECL_NEW(gpioiic, sizeof(struct gpioiic_softc),
     81  1.2   dyoung 	gpioiic_match, gpioiic_attach, gpioiic_detach, NULL);
     82  1.1  mbalmer 
     83  1.1  mbalmer extern struct cfdriver gpioiic_cd;
     84  1.1  mbalmer 
     85  1.1  mbalmer static const struct i2c_bitbang_ops gpioiic_bbops = {
     86  1.1  mbalmer 	gpioiic_bb_set_bits,
     87  1.1  mbalmer 	gpioiic_bb_set_dir,
     88  1.1  mbalmer 	gpioiic_bb_read_bits,
     89  1.1  mbalmer 	{ GPIOIIC_SDA, GPIOIIC_SCL, GPIOIIC_SDA, 0 }
     90  1.1  mbalmer };
     91  1.1  mbalmer 
     92  1.1  mbalmer int
     93  1.1  mbalmer gpioiic_match(device_t parent, cfdata_t cf, void *aux)
     94  1.1  mbalmer {
     95  1.1  mbalmer 	struct gpio_attach_args *ga = aux;
     96  1.1  mbalmer 
     97  1.1  mbalmer 	if (strcmp(ga->ga_dvname, cf->cf_name))
     98  1.1  mbalmer 		return 0;
     99  1.1  mbalmer 
    100  1.1  mbalmer 	if (ga->ga_offset == -1)
    101  1.1  mbalmer 		return 0;
    102  1.1  mbalmer 
    103  1.1  mbalmer 	/* Check that we have enough pins */
    104  1.1  mbalmer 	if (gpio_npins(ga->ga_mask) != GPIOIIC_NPINS) {
    105  1.1  mbalmer 		aprint_debug("%s: invalid pin mask 0x%02x\n", cf->cf_name,
    106  1.1  mbalmer 		    ga->ga_mask);
    107  1.1  mbalmer 		return 0;
    108  1.1  mbalmer 	}
    109  1.1  mbalmer 	return 1;
    110  1.1  mbalmer }
    111  1.1  mbalmer 
    112  1.1  mbalmer void
    113  1.6      chs gpioiic_attach(device_t parent, device_t self, void *aux)
    114  1.1  mbalmer {
    115  1.1  mbalmer 	struct gpioiic_softc *sc = device_private(self);
    116  1.1  mbalmer 	struct gpio_attach_args *ga = aux;
    117  1.1  mbalmer 	struct i2cbus_attach_args iba;
    118  1.1  mbalmer 	int caps;
    119  1.1  mbalmer 
    120  1.1  mbalmer 	/* Map pins */
    121  1.1  mbalmer 	sc->sc_gpio = ga->ga_gpio;
    122  1.1  mbalmer 	sc->sc_map.pm_map = sc->_map;
    123  1.5  mbalmer 
    124  1.5  mbalmer 
    125  1.1  mbalmer 	if (gpio_pin_map(sc->sc_gpio, ga->ga_offset, ga->ga_mask,
    126  1.1  mbalmer 	    &sc->sc_map)) {
    127  1.1  mbalmer 		aprint_error(": can't map pins\n");
    128  1.1  mbalmer 		return;
    129  1.1  mbalmer 	}
    130  1.1  mbalmer 
    131  1.5  mbalmer 	if (ga->ga_flags & GPIOIIC_PIN_REVERSE) {
    132  1.5  mbalmer 		sc->sc_pin_sda = GPIOIIC_PIN_SCL;
    133  1.5  mbalmer 		sc->sc_pin_scl = GPIOIIC_PIN_SDA;
    134  1.5  mbalmer 	} else {
    135  1.5  mbalmer 		sc->sc_pin_sda = GPIOIIC_PIN_SDA;
    136  1.5  mbalmer 		sc->sc_pin_scl = GPIOIIC_PIN_SCL;
    137  1.5  mbalmer 	}
    138  1.5  mbalmer 
    139  1.1  mbalmer 	/* Configure SDA pin */
    140  1.5  mbalmer 	caps = gpio_pin_caps(sc->sc_gpio, &sc->sc_map, sc->sc_pin_sda);
    141  1.1  mbalmer 	if (!(caps & GPIO_PIN_OUTPUT)) {
    142  1.1  mbalmer 		aprint_error(": SDA pin is unable to drive output\n");
    143  1.1  mbalmer 		goto fail;
    144  1.1  mbalmer 	}
    145  1.1  mbalmer 	if (!(caps & GPIO_PIN_INPUT)) {
    146  1.1  mbalmer 		aprint_error(": SDA pin is unable to read input\n");
    147  1.1  mbalmer 		goto fail;
    148  1.1  mbalmer 	}
    149  1.5  mbalmer 	aprint_normal(": SDA[%d]", sc->sc_map.pm_map[sc->sc_pin_sda]);
    150  1.1  mbalmer 	sc->sc_sda = GPIO_PIN_OUTPUT;
    151  1.1  mbalmer 	if (caps & GPIO_PIN_OPENDRAIN) {
    152  1.1  mbalmer 		aprint_normal(" open-drain");
    153  1.1  mbalmer 		sc->sc_sda |= GPIO_PIN_OPENDRAIN;
    154  1.1  mbalmer 	} else if ((caps & GPIO_PIN_PUSHPULL) && (caps & GPIO_PIN_TRISTATE)) {
    155  1.1  mbalmer 		aprint_normal(" push-pull tri-state");
    156  1.1  mbalmer 		sc->sc_sda |= GPIO_PIN_PUSHPULL;
    157  1.1  mbalmer 	}
    158  1.1  mbalmer 	if (caps & GPIO_PIN_PULLUP) {
    159  1.1  mbalmer 		aprint_normal(" pull-up");
    160  1.1  mbalmer 		sc->sc_sda |= GPIO_PIN_PULLUP;
    161  1.1  mbalmer 	}
    162  1.5  mbalmer 	gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, sc->sc_pin_sda, sc->sc_sda);
    163  1.1  mbalmer 
    164  1.1  mbalmer 	/* Configure SCL pin */
    165  1.5  mbalmer 	caps = gpio_pin_caps(sc->sc_gpio, &sc->sc_map, sc->sc_pin_scl);
    166  1.1  mbalmer 	if (!(caps & GPIO_PIN_OUTPUT)) {
    167  1.1  mbalmer 		aprint_error(": SCL pin is unable to drive output\n");
    168  1.1  mbalmer 		goto fail;
    169  1.1  mbalmer 	}
    170  1.5  mbalmer 	aprint_normal(", SCL[%d]", sc->sc_map.pm_map[sc->sc_pin_scl]);
    171  1.1  mbalmer 	sc->sc_scl = GPIO_PIN_OUTPUT;
    172  1.1  mbalmer 	if (caps & GPIO_PIN_OPENDRAIN) {
    173  1.1  mbalmer 		aprint_normal(" open-drain");
    174  1.1  mbalmer 		sc->sc_scl |= GPIO_PIN_OPENDRAIN;
    175  1.1  mbalmer 		if (caps & GPIO_PIN_PULLUP) {
    176  1.1  mbalmer 			aprint_normal(" pull-up");
    177  1.1  mbalmer 			sc->sc_scl |= GPIO_PIN_PULLUP;
    178  1.1  mbalmer 		}
    179  1.1  mbalmer 	} else if (caps & GPIO_PIN_PUSHPULL) {
    180  1.1  mbalmer 		aprint_normal(" push-pull");
    181  1.1  mbalmer 		sc->sc_scl |= GPIO_PIN_PUSHPULL;
    182  1.1  mbalmer 	}
    183  1.5  mbalmer 	gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, sc->sc_pin_scl, sc->sc_scl);
    184  1.1  mbalmer 
    185  1.1  mbalmer 	aprint_normal("\n");
    186  1.1  mbalmer 
    187  1.1  mbalmer 	/* Attach I2C bus */
    188  1.1  mbalmer 	rw_init(&sc->sc_i2c_lock);
    189  1.1  mbalmer 	sc->sc_i2c_tag.ic_cookie = sc;
    190  1.1  mbalmer 	sc->sc_i2c_tag.ic_acquire_bus = gpioiic_i2c_acquire_bus;
    191  1.1  mbalmer 	sc->sc_i2c_tag.ic_release_bus = gpioiic_i2c_release_bus;
    192  1.1  mbalmer 	sc->sc_i2c_tag.ic_send_start = gpioiic_i2c_send_start;
    193  1.1  mbalmer 	sc->sc_i2c_tag.ic_send_stop = gpioiic_i2c_send_stop;
    194  1.1  mbalmer 	sc->sc_i2c_tag.ic_initiate_xfer = gpioiic_i2c_initiate_xfer;
    195  1.1  mbalmer 	sc->sc_i2c_tag.ic_read_byte = gpioiic_i2c_read_byte;
    196  1.1  mbalmer 	sc->sc_i2c_tag.ic_write_byte = gpioiic_i2c_write_byte;
    197  1.1  mbalmer 	sc->sc_i2c_tag.ic_exec = NULL;
    198  1.1  mbalmer 
    199  1.1  mbalmer 	memset(&iba, 0, sizeof(iba));
    200  1.1  mbalmer 	iba.iba_type = I2C_TYPE_SMBUS;
    201  1.1  mbalmer 	iba.iba_tag = &sc->sc_i2c_tag;
    202  1.1  mbalmer 	sc->sc_i2c_dev = config_found(self, &iba, iicbus_print);
    203  1.1  mbalmer 
    204  1.1  mbalmer 	if (!pmf_device_register(self, NULL, NULL))
    205  1.1  mbalmer 		aprint_error("%s: could not establish power handler\n",
    206  1.1  mbalmer 		    device_xname(self));
    207  1.1  mbalmer 	return;
    208  1.1  mbalmer 
    209  1.1  mbalmer fail:
    210  1.1  mbalmer 	gpio_pin_unmap(sc->sc_gpio, &sc->sc_map);
    211  1.1  mbalmer }
    212  1.1  mbalmer 
    213  1.1  mbalmer int
    214  1.6      chs gpioiic_detach(device_t self, int flags)
    215  1.1  mbalmer {
    216  1.1  mbalmer 	struct gpioiic_softc *sc = device_private(self);
    217  1.1  mbalmer 	int rv = 0;
    218  1.1  mbalmer 
    219  1.1  mbalmer 	if (sc->sc_i2c_dev != NULL)
    220  1.1  mbalmer 		rv = config_detach(sc->sc_i2c_dev, flags);
    221  1.1  mbalmer 
    222  1.1  mbalmer 	if (!rv) {
    223  1.1  mbalmer 		gpio_pin_unmap(sc->sc_gpio, &sc->sc_map);
    224  1.1  mbalmer 		pmf_device_deregister(self);
    225  1.1  mbalmer 	}
    226  1.1  mbalmer 	return rv;
    227  1.1  mbalmer }
    228  1.1  mbalmer 
    229  1.1  mbalmer int
    230  1.1  mbalmer gpioiic_i2c_acquire_bus(void *cookie, int flags)
    231  1.1  mbalmer {
    232  1.1  mbalmer 	struct gpioiic_softc *sc = cookie;
    233  1.1  mbalmer 
    234  1.1  mbalmer 	if (flags & I2C_F_POLL)
    235  1.1  mbalmer 		return 0;
    236  1.1  mbalmer 
    237  1.1  mbalmer 	rw_enter(&sc->sc_i2c_lock, RW_WRITER);
    238  1.1  mbalmer 	return 1;
    239  1.1  mbalmer }
    240  1.1  mbalmer 
    241  1.1  mbalmer void
    242  1.1  mbalmer gpioiic_i2c_release_bus(void *cookie, int flags)
    243  1.1  mbalmer {
    244  1.1  mbalmer 	struct gpioiic_softc *sc = cookie;
    245  1.1  mbalmer 
    246  1.1  mbalmer 	if (flags & I2C_F_POLL)
    247  1.1  mbalmer 		return;
    248  1.1  mbalmer 
    249  1.1  mbalmer 	rw_exit(&sc->sc_i2c_lock);
    250  1.1  mbalmer }
    251  1.1  mbalmer 
    252  1.1  mbalmer int
    253  1.1  mbalmer gpioiic_i2c_send_start(void *cookie, int flags)
    254  1.1  mbalmer {
    255  1.1  mbalmer 	return i2c_bitbang_send_start(cookie, flags, &gpioiic_bbops);
    256  1.1  mbalmer }
    257  1.1  mbalmer 
    258  1.1  mbalmer int
    259  1.1  mbalmer gpioiic_i2c_send_stop(void *cookie, int flags)
    260  1.1  mbalmer {
    261  1.1  mbalmer 	return i2c_bitbang_send_stop(cookie, flags, &gpioiic_bbops);
    262  1.1  mbalmer }
    263  1.1  mbalmer 
    264  1.1  mbalmer int
    265  1.1  mbalmer gpioiic_i2c_initiate_xfer(void *cookie, i2c_addr_t addr, int flags)
    266  1.1  mbalmer {
    267  1.1  mbalmer 	return i2c_bitbang_initiate_xfer(cookie, addr, flags, &gpioiic_bbops);
    268  1.1  mbalmer }
    269  1.1  mbalmer 
    270  1.1  mbalmer int
    271  1.4  mbalmer gpioiic_i2c_read_byte(void *cookie, uint8_t *bytep, int flags)
    272  1.1  mbalmer {
    273  1.1  mbalmer 	return i2c_bitbang_read_byte(cookie, bytep, flags, &gpioiic_bbops);
    274  1.1  mbalmer }
    275  1.1  mbalmer 
    276  1.1  mbalmer int
    277  1.4  mbalmer gpioiic_i2c_write_byte(void *cookie, uint8_t byte, int flags)
    278  1.1  mbalmer {
    279  1.1  mbalmer 	return i2c_bitbang_write_byte(cookie, byte, flags, &gpioiic_bbops);
    280  1.1  mbalmer }
    281  1.1  mbalmer 
    282  1.1  mbalmer void
    283  1.4  mbalmer gpioiic_bb_set_bits(void *cookie, uint32_t bits)
    284  1.1  mbalmer {
    285  1.1  mbalmer 	struct gpioiic_softc *sc = cookie;
    286  1.1  mbalmer 
    287  1.5  mbalmer 	gpio_pin_write(sc->sc_gpio, &sc->sc_map, sc->sc_pin_sda,
    288  1.1  mbalmer 	    bits & GPIOIIC_SDA ? GPIO_PIN_HIGH : GPIO_PIN_LOW);
    289  1.1  mbalmer 	gpio_pin_write(sc->sc_gpio, &sc->sc_map, GPIOIIC_PIN_SCL,
    290  1.5  mbalmer 	    bits & GPIOIIC_SCL ? GPIO_PIN_HIGH : sc->sc_pin_scl);
    291  1.1  mbalmer }
    292  1.1  mbalmer 
    293  1.1  mbalmer void
    294  1.4  mbalmer gpioiic_bb_set_dir(void *cookie, uint32_t bits)
    295  1.1  mbalmer {
    296  1.1  mbalmer 	struct gpioiic_softc *sc = cookie;
    297  1.1  mbalmer 	int sda = sc->sc_sda;
    298  1.1  mbalmer 
    299  1.1  mbalmer 	sda &= ~(GPIO_PIN_INPUT | GPIO_PIN_OUTPUT | GPIO_PIN_TRISTATE);
    300  1.1  mbalmer 	sda |= (bits & GPIOIIC_SDA ? GPIO_PIN_OUTPUT : GPIO_PIN_INPUT);
    301  1.1  mbalmer 	if ((sda & GPIO_PIN_PUSHPULL) && !(bits & GPIOIIC_SDA))
    302  1.1  mbalmer 		sda |= GPIO_PIN_TRISTATE;
    303  1.1  mbalmer 	if (sc->sc_sda != sda) {
    304  1.1  mbalmer 		sc->sc_sda = sda;
    305  1.5  mbalmer 		gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, sc->sc_pin_sda,
    306  1.1  mbalmer 		    sc->sc_sda);
    307  1.1  mbalmer 	}
    308  1.1  mbalmer }
    309  1.1  mbalmer 
    310  1.4  mbalmer uint32_t
    311  1.1  mbalmer gpioiic_bb_read_bits(void *cookie)
    312  1.1  mbalmer {
    313  1.1  mbalmer 	struct gpioiic_softc *sc = cookie;
    314  1.4  mbalmer 	uint32_t bits = 0;
    315  1.1  mbalmer 
    316  1.3  mbalmer 	if (gpio_pin_read(sc->sc_gpio, &sc->sc_map,
    317  1.5  mbalmer 	    sc->sc_pin_sda) == GPIO_PIN_HIGH)
    318  1.3  mbalmer 		bits |= GPIOIIC_SDA;
    319  1.3  mbalmer 	if (gpio_pin_read(sc->sc_gpio, &sc->sc_map,
    320  1.5  mbalmer 	    sc->sc_pin_scl) == GPIO_PIN_HIGH)
    321  1.3  mbalmer 		bits |= GPIOIIC_SCL;
    322  1.3  mbalmer 
    323  1.3  mbalmer 	return bits;
    324  1.1  mbalmer }
    325  1.5  mbalmer 
    326  1.5  mbalmer MODULE(MODULE_CLASS_DRIVER, gpioiic, "gpio,iic");
    327  1.5  mbalmer 
    328  1.5  mbalmer #ifdef _MODULE
    329  1.5  mbalmer #include "ioconf.c"
    330  1.5  mbalmer #endif
    331  1.5  mbalmer 
    332  1.5  mbalmer static int
    333  1.5  mbalmer gpioiic_modcmd(modcmd_t cmd, void *opaque)
    334  1.5  mbalmer {
    335  1.5  mbalmer 	int error;
    336  1.5  mbalmer 
    337  1.5  mbalmer 	error = 0;
    338  1.5  mbalmer 	switch (cmd) {
    339  1.5  mbalmer 	case MODULE_CMD_INIT:
    340  1.5  mbalmer #ifdef _MODULE
    341  1.5  mbalmer 		error = config_init_component(cfdriver_ioconf_gpioiic,
    342  1.5  mbalmer 		    cfattach_ioconf_gpioiic, cfdata_ioconf_gpioiic);
    343  1.5  mbalmer 		if (error)
    344  1.5  mbalmer 			aprint_error("%s: unable to init component\n",
    345  1.5  mbalmer 			    gpioiic_cd.cd_name);
    346  1.5  mbalmer #endif
    347  1.5  mbalmer 		break;
    348  1.5  mbalmer 	case MODULE_CMD_FINI:
    349  1.5  mbalmer #ifdef _MODULE
    350  1.5  mbalmer 		config_fini_component(cfdriver_ioconf_gpioiic,
    351  1.5  mbalmer 		    cfattach_ioconf_gpioiic, cfdata_ioconf_gpioiic);
    352  1.5  mbalmer #endif
    353  1.5  mbalmer 		break;
    354  1.5  mbalmer 	default:
    355  1.5  mbalmer 		error = ENOTTY;
    356  1.5  mbalmer 	}
    357  1.5  mbalmer 	return error;
    358  1.5  mbalmer }
    359