lm75.c revision 1.29 1 1.29 jdc /* $NetBSD: lm75.c,v 1.29 2016/01/11 18:23:11 jdc Exp $ */
2 1.1 thorpej
3 1.1 thorpej /*
4 1.1 thorpej * Copyright (c) 2003 Wasabi Systems, Inc.
5 1.1 thorpej * All rights reserved.
6 1.1 thorpej *
7 1.1 thorpej * Written by Jason R. Thorpe for Wasabi Systems, Inc.
8 1.1 thorpej *
9 1.1 thorpej * Redistribution and use in source and binary forms, with or without
10 1.1 thorpej * modification, are permitted provided that the following conditions
11 1.1 thorpej * are met:
12 1.1 thorpej * 1. Redistributions of source code must retain the above copyright
13 1.1 thorpej * notice, this list of conditions and the following disclaimer.
14 1.1 thorpej * 2. Redistributions in binary form must reproduce the above copyright
15 1.1 thorpej * notice, this list of conditions and the following disclaimer in the
16 1.1 thorpej * documentation and/or other materials provided with the distribution.
17 1.1 thorpej * 3. All advertising materials mentioning features or use of this software
18 1.1 thorpej * must display the following acknowledgement:
19 1.1 thorpej * This product includes software developed for the NetBSD Project by
20 1.1 thorpej * Wasabi Systems, Inc.
21 1.1 thorpej * 4. The name of Wasabi Systems, Inc. may not be used to endorse
22 1.1 thorpej * or promote products derived from this software without specific prior
23 1.1 thorpej * written permission.
24 1.1 thorpej *
25 1.1 thorpej * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
26 1.1 thorpej * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27 1.1 thorpej * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 1.1 thorpej * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
29 1.1 thorpej * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30 1.1 thorpej * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31 1.1 thorpej * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32 1.1 thorpej * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33 1.1 thorpej * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34 1.1 thorpej * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 1.1 thorpej * POSSIBILITY OF SUCH DAMAGE.
36 1.1 thorpej */
37 1.1 thorpej
38 1.17 lukem #include <sys/cdefs.h>
39 1.29 jdc __KERNEL_RCSID(0, "$NetBSD: lm75.c,v 1.29 2016/01/11 18:23:11 jdc Exp $");
40 1.17 lukem
41 1.1 thorpej #include <sys/param.h>
42 1.1 thorpej #include <sys/systm.h>
43 1.1 thorpej #include <sys/device.h>
44 1.1 thorpej #include <sys/kernel.h>
45 1.23 macallan #include <sys/sysctl.h>
46 1.1 thorpej
47 1.1 thorpej #include <dev/sysmon/sysmonvar.h>
48 1.1 thorpej
49 1.1 thorpej #include <dev/i2c/i2cvar.h>
50 1.1 thorpej #include <dev/i2c/lm75reg.h>
51 1.1 thorpej
52 1.1 thorpej struct lmtemp_softc {
53 1.23 macallan device_t sc_dev;
54 1.1 thorpej i2c_tag_t sc_tag;
55 1.1 thorpej int sc_address;
56 1.1 thorpej
57 1.18 xtraeme struct sysmon_envsys *sc_sme;
58 1.16 xtraeme envsys_data_t sc_sensor;
59 1.23 macallan int sc_tmax;
60 1.28 jdc uint32_t sc_smax, sc_smin, sc_scrit;
61 1.9 kiyohara
62 1.27 jdc uint32_t (*sc_lmtemp_decode)(const uint8_t *, int);
63 1.28 jdc void (*sc_lmtemp_encode)(const uint32_t, uint8_t *, int);
64 1.1 thorpej };
65 1.1 thorpej
66 1.18 xtraeme static int lmtemp_match(device_t, cfdata_t, void *);
67 1.18 xtraeme static void lmtemp_attach(device_t, device_t, void *);
68 1.1 thorpej
69 1.18 xtraeme CFATTACH_DECL_NEW(lmtemp, sizeof(struct lmtemp_softc),
70 1.1 thorpej lmtemp_match, lmtemp_attach, NULL, NULL);
71 1.1 thorpej
72 1.16 xtraeme static void lmtemp_refresh(struct sysmon_envsys *, envsys_data_t *);
73 1.18 xtraeme static int lmtemp_config_write(struct lmtemp_softc *, uint8_t);
74 1.28 jdc static int lmtemp_temp_write(struct lmtemp_softc *, uint8_t, uint32_t,
75 1.28 jdc int);
76 1.27 jdc static int lmtemp_temp_read(struct lmtemp_softc *, uint8_t, uint32_t *,
77 1.27 jdc int);
78 1.27 jdc static uint32_t lmtemp_decode_lm75(const uint8_t *, int);
79 1.27 jdc static uint32_t lmtemp_decode_ds75(const uint8_t *, int);
80 1.27 jdc static uint32_t lmtemp_decode_lm77(const uint8_t *, int);
81 1.28 jdc static void lmtemp_encode_lm75(const uint32_t, uint8_t *, int);
82 1.28 jdc static void lmtemp_encode_ds75(const uint32_t, uint8_t *, int);
83 1.28 jdc static void lmtemp_encode_lm77(const uint32_t, uint8_t *, int);
84 1.28 jdc static void lmtemp_getlim_lm75(struct sysmon_envsys *, envsys_data_t *,
85 1.28 jdc sysmon_envsys_lim_t *, uint32_t *);
86 1.28 jdc static void lmtemp_getlim_lm77(struct sysmon_envsys *, envsys_data_t *,
87 1.28 jdc sysmon_envsys_lim_t *, uint32_t *);
88 1.28 jdc static void lmtemp_setlim_lm75(struct sysmon_envsys *, envsys_data_t *,
89 1.28 jdc sysmon_envsys_lim_t *, uint32_t *);
90 1.28 jdc static void lmtemp_setlim_lm77(struct sysmon_envsys *, envsys_data_t *,
91 1.28 jdc sysmon_envsys_lim_t *, uint32_t *);
92 1.9 kiyohara
93 1.23 macallan static void lmtemp_setup_sysctl(struct lmtemp_softc *);
94 1.23 macallan static int sysctl_lm75_temp(SYSCTLFN_ARGS);
95 1.21 martin
96 1.21 martin static const char * lmtemp_compats[] = {
97 1.21 martin "i2c-lm75",
98 1.21 martin /*
99 1.21 martin * see XXX in _attach() below: add code once non-lm75 matches are
100 1.21 martin * added here!
101 1.21 martin */
102 1.21 martin NULL
103 1.21 martin };
104 1.21 martin
105 1.9 kiyohara enum {
106 1.9 kiyohara lmtemp_lm75 = 0,
107 1.9 kiyohara lmtemp_ds75,
108 1.9 kiyohara lmtemp_lm77,
109 1.9 kiyohara };
110 1.9 kiyohara static const struct {
111 1.9 kiyohara int lmtemp_type;
112 1.9 kiyohara const char *lmtemp_name;
113 1.9 kiyohara int lmtemp_addrmask;
114 1.9 kiyohara int lmtemp_addr;
115 1.27 jdc uint32_t (*lmtemp_decode)(const uint8_t *, int);
116 1.28 jdc void (*lmtemp_encode)(const uint32_t, uint8_t *, int);
117 1.28 jdc void (*lmtemp_getlim)(struct sysmon_envsys *, envsys_data_t *,
118 1.28 jdc sysmon_envsys_lim_t *, uint32_t *);
119 1.28 jdc void (*lmtemp_setlim)(struct sysmon_envsys *, envsys_data_t *,
120 1.28 jdc sysmon_envsys_lim_t *, uint32_t *);
121 1.9 kiyohara } lmtemptbl[] = {
122 1.28 jdc { lmtemp_lm75, "LM75", LM75_ADDRMASK, LM75_ADDR,
123 1.28 jdc lmtemp_decode_lm75, lmtemp_encode_lm75,
124 1.28 jdc lmtemp_getlim_lm75, lmtemp_setlim_lm75 },
125 1.28 jdc { lmtemp_ds75, "DS75", LM75_ADDRMASK, LM75_ADDR,
126 1.28 jdc lmtemp_decode_ds75, lmtemp_encode_ds75,
127 1.28 jdc lmtemp_getlim_lm75, lmtemp_setlim_lm75 },
128 1.28 jdc { lmtemp_lm77, "LM77", LM77_ADDRMASK, LM77_ADDR,
129 1.28 jdc lmtemp_decode_lm77, lmtemp_encode_lm77,
130 1.28 jdc lmtemp_getlim_lm77, lmtemp_setlim_lm77 },
131 1.28 jdc { -1, NULL, 0, 0,
132 1.28 jdc NULL, NULL,
133 1.28 jdc NULL, NULL }
134 1.9 kiyohara };
135 1.1 thorpej
136 1.1 thorpej static int
137 1.18 xtraeme lmtemp_match(device_t parent, cfdata_t cf, void *aux)
138 1.1 thorpej {
139 1.1 thorpej struct i2c_attach_args *ia = aux;
140 1.9 kiyohara int i;
141 1.9 kiyohara
142 1.21 martin if (ia->ia_name == NULL) {
143 1.21 martin /*
144 1.21 martin * Indirect config - not much we can do!
145 1.21 martin */
146 1.21 martin for (i = 0; lmtemptbl[i].lmtemp_type != -1 ; i++)
147 1.21 martin if (lmtemptbl[i].lmtemp_type == cf->cf_flags)
148 1.21 martin break;
149 1.21 martin if (lmtemptbl[i].lmtemp_type == -1)
150 1.21 martin return 0;
151 1.21 martin
152 1.21 martin if ((ia->ia_addr & lmtemptbl[i].lmtemp_addrmask) ==
153 1.21 martin lmtemptbl[i].lmtemp_addr)
154 1.21 martin return 1;
155 1.21 martin } else {
156 1.21 martin /*
157 1.21 martin * Direct config - match via the list of compatible
158 1.26 phx * hardware or simply match the device name.
159 1.21 martin */
160 1.26 phx if (ia->ia_ncompat > 0) {
161 1.26 phx if (iic_compat_match(ia, lmtemp_compats))
162 1.26 phx return 1;
163 1.26 phx } else {
164 1.26 phx if (strcmp(ia->ia_name, "lmtemp") == 0)
165 1.26 phx return 1;
166 1.26 phx }
167 1.21 martin }
168 1.21 martin
169 1.1 thorpej
170 1.18 xtraeme return 0;
171 1.1 thorpej }
172 1.1 thorpej
173 1.1 thorpej static void
174 1.18 xtraeme lmtemp_attach(device_t parent, device_t self, void *aux)
175 1.1 thorpej {
176 1.6 thorpej struct lmtemp_softc *sc = device_private(self);
177 1.1 thorpej struct i2c_attach_args *ia = aux;
178 1.9 kiyohara int i;
179 1.9 kiyohara
180 1.23 macallan sc->sc_dev = self;
181 1.21 martin if (ia->ia_name == NULL) {
182 1.21 martin for (i = 0; lmtemptbl[i].lmtemp_type != -1 ; i++)
183 1.21 martin if (lmtemptbl[i].lmtemp_type ==
184 1.21 martin device_cfdata(self)->cf_flags)
185 1.21 martin break;
186 1.21 martin } else {
187 1.21 martin /* XXX - add code when adding other direct matches! */
188 1.21 martin i = 0;
189 1.21 martin }
190 1.1 thorpej
191 1.1 thorpej sc->sc_tag = ia->ia_tag;
192 1.1 thorpej sc->sc_address = ia->ia_addr;
193 1.1 thorpej
194 1.1 thorpej aprint_naive(": Temperature Sensor\n");
195 1.21 martin if (ia->ia_name) {
196 1.21 martin aprint_normal(": %s %s Temperature Sensor\n", ia->ia_name,
197 1.21 martin lmtemptbl[i].lmtemp_name);
198 1.21 martin } else {
199 1.21 martin aprint_normal(": %s Temperature Sensor\n",
200 1.21 martin lmtemptbl[i].lmtemp_name);
201 1.21 martin }
202 1.1 thorpej
203 1.27 jdc sc->sc_lmtemp_decode = lmtemptbl[i].lmtemp_decode;
204 1.28 jdc sc->sc_lmtemp_encode = lmtemptbl[i].lmtemp_encode;
205 1.27 jdc
206 1.27 jdc iic_acquire_bus(sc->sc_tag, I2C_F_POLL);
207 1.27 jdc
208 1.28 jdc /* Read temperature limit(s) and remember initial value(s). */
209 1.28 jdc if (i == lmtemp_lm77) {
210 1.29 jdc if (lmtemp_temp_read(sc, LM77_REG_TCRIT_SET_POINT,
211 1.29 jdc &sc->sc_scrit, 1) != 0) {
212 1.29 jdc aprint_error_dev(self,
213 1.29 jdc "unable to read low register\n");
214 1.29 jdc iic_release_bus(sc->sc_tag, I2C_F_POLL);
215 1.29 jdc return;
216 1.29 jdc }
217 1.28 jdc if (lmtemp_temp_read(sc, LM77_REG_TLOW_SET_POINT,
218 1.29 jdc &sc->sc_smin, 1) != 0) {
219 1.28 jdc aprint_error_dev(self,
220 1.28 jdc "unable to read low register\n");
221 1.28 jdc iic_release_bus(sc->sc_tag, I2C_F_POLL);
222 1.28 jdc return;
223 1.28 jdc }
224 1.28 jdc if (lmtemp_temp_read(sc, LM77_REG_THIGH_SET_POINT,
225 1.28 jdc &sc->sc_smax, 1) != 0) {
226 1.28 jdc aprint_error_dev(self,
227 1.28 jdc "unable to read high register\n");
228 1.28 jdc iic_release_bus(sc->sc_tag, I2C_F_POLL);
229 1.28 jdc return;
230 1.28 jdc }
231 1.29 jdc } else { /* LM75 or compatible */
232 1.29 jdc if (lmtemp_temp_read(sc, LM75_REG_TOS_SET_POINT,
233 1.29 jdc &sc->sc_smax, 1) != 0) {
234 1.29 jdc aprint_error_dev(self, "unable to read Tos register\n");
235 1.29 jdc iic_release_bus(sc->sc_tag, I2C_F_POLL);
236 1.29 jdc return;
237 1.29 jdc }
238 1.28 jdc }
239 1.29 jdc sc->sc_tmax = sc->sc_smax;
240 1.27 jdc
241 1.23 macallan if (i == lmtemp_lm75)
242 1.23 macallan lmtemp_setup_sysctl(sc);
243 1.23 macallan
244 1.1 thorpej /* Set the configuration of the LM75 to defaults. */
245 1.23 macallan if (lmtemp_config_write(sc, LM75_CONFIG_FAULT_QUEUE_4) != 0) {
246 1.18 xtraeme aprint_error_dev(self, "unable to write config register\n");
247 1.1 thorpej iic_release_bus(sc->sc_tag, I2C_F_POLL);
248 1.1 thorpej return;
249 1.1 thorpej }
250 1.1 thorpej iic_release_bus(sc->sc_tag, I2C_F_POLL);
251 1.1 thorpej
252 1.16 xtraeme sc->sc_sme = sysmon_envsys_create();
253 1.1 thorpej /* Initialize sensor data. */
254 1.16 xtraeme sc->sc_sensor.units = ENVSYS_STEMP;
255 1.22 pgoyette sc->sc_sensor.state = ENVSYS_SINVALID;
256 1.28 jdc sc->sc_sensor.flags = ENVSYS_FMONLIMITS;
257 1.21 martin (void)strlcpy(sc->sc_sensor.desc,
258 1.21 martin ia->ia_name? ia->ia_name : device_xname(self),
259 1.18 xtraeme sizeof(sc->sc_sensor.desc));
260 1.16 xtraeme if (sysmon_envsys_sensor_attach(sc->sc_sme, &sc->sc_sensor)) {
261 1.16 xtraeme sysmon_envsys_destroy(sc->sc_sme);
262 1.16 xtraeme return;
263 1.16 xtraeme }
264 1.1 thorpej
265 1.7 riz /* Hook into system monitor. */
266 1.18 xtraeme sc->sc_sme->sme_name = device_xname(self);
267 1.16 xtraeme sc->sc_sme->sme_cookie = sc;
268 1.16 xtraeme sc->sc_sme->sme_refresh = lmtemp_refresh;
269 1.28 jdc sc->sc_sme->sme_get_limits = lmtemptbl[i].lmtemp_getlim;
270 1.28 jdc sc->sc_sme->sme_set_limits = lmtemptbl[i].lmtemp_setlim;
271 1.1 thorpej
272 1.16 xtraeme if (sysmon_envsys_register(sc->sc_sme)) {
273 1.18 xtraeme aprint_error_dev(self, "unable to register with sysmon\n");
274 1.16 xtraeme sysmon_envsys_destroy(sc->sc_sme);
275 1.16 xtraeme }
276 1.1 thorpej }
277 1.1 thorpej
278 1.1 thorpej static int
279 1.1 thorpej lmtemp_config_write(struct lmtemp_softc *sc, uint8_t val)
280 1.1 thorpej {
281 1.1 thorpej uint8_t cmdbuf[2];
282 1.1 thorpej
283 1.1 thorpej cmdbuf[0] = LM75_REG_CONFIG;
284 1.1 thorpej cmdbuf[1] = val;
285 1.1 thorpej
286 1.18 xtraeme return iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP,
287 1.18 xtraeme sc->sc_address, cmdbuf, 1, &cmdbuf[1], 1, I2C_F_POLL);
288 1.1 thorpej }
289 1.1 thorpej
290 1.1 thorpej static int
291 1.28 jdc lmtemp_temp_write(struct lmtemp_softc *sc, uint8_t reg, uint32_t val, int degc)
292 1.23 macallan {
293 1.23 macallan uint8_t cmdbuf[3];
294 1.23 macallan
295 1.23 macallan cmdbuf[0] = reg;
296 1.28 jdc sc->sc_lmtemp_encode(val, &cmdbuf[1], degc);
297 1.23 macallan
298 1.23 macallan return iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP,
299 1.23 macallan sc->sc_address, cmdbuf, 1, &cmdbuf[1], 2, I2C_F_POLL);
300 1.23 macallan }
301 1.23 macallan
302 1.23 macallan static int
303 1.27 jdc lmtemp_temp_read(struct lmtemp_softc *sc, uint8_t which, uint32_t *valp,
304 1.27 jdc int degc)
305 1.1 thorpej {
306 1.2 scw int error;
307 1.1 thorpej uint8_t cmdbuf[1];
308 1.1 thorpej uint8_t buf[LM75_TEMP_LEN];
309 1.1 thorpej
310 1.1 thorpej cmdbuf[0] = which;
311 1.1 thorpej
312 1.1 thorpej error = iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP,
313 1.1 thorpej sc->sc_address, cmdbuf, 1, buf, LM75_TEMP_LEN, 0);
314 1.1 thorpej if (error)
315 1.18 xtraeme return error;
316 1.1 thorpej
317 1.27 jdc *valp = sc->sc_lmtemp_decode(buf, degc);
318 1.18 xtraeme return 0;
319 1.1 thorpej }
320 1.1 thorpej
321 1.1 thorpej static void
322 1.1 thorpej lmtemp_refresh_sensor_data(struct lmtemp_softc *sc)
323 1.1 thorpej {
324 1.1 thorpej uint32_t val;
325 1.1 thorpej int error;
326 1.1 thorpej
327 1.27 jdc error = lmtemp_temp_read(sc, LM75_REG_TEMP, &val, 0);
328 1.1 thorpej if (error) {
329 1.1 thorpej #if 0
330 1.25 chs aprint_error_dev(sc->sc_dev, "unable to read temperature, error = %d\n",
331 1.19 cegger error);
332 1.1 thorpej #endif
333 1.16 xtraeme sc->sc_sensor.state = ENVSYS_SINVALID;
334 1.1 thorpej return;
335 1.1 thorpej }
336 1.1 thorpej
337 1.16 xtraeme sc->sc_sensor.value_cur = val;
338 1.16 xtraeme sc->sc_sensor.state = ENVSYS_SVALID;
339 1.1 thorpej }
340 1.1 thorpej
341 1.16 xtraeme static void
342 1.16 xtraeme lmtemp_refresh(struct sysmon_envsys *sme, envsys_data_t *edata)
343 1.1 thorpej {
344 1.1 thorpej struct lmtemp_softc *sc = sme->sme_cookie;
345 1.1 thorpej
346 1.1 thorpej iic_acquire_bus(sc->sc_tag, 0); /* also locks our instance */
347 1.1 thorpej lmtemp_refresh_sensor_data(sc);
348 1.1 thorpej iic_release_bus(sc->sc_tag, 0); /* also unlocks our instance */
349 1.1 thorpej }
350 1.2 scw
351 1.28 jdc static void
352 1.28 jdc lmtemp_getlim_lm75(struct sysmon_envsys *sme, envsys_data_t *edata,
353 1.28 jdc sysmon_envsys_lim_t *limits, uint32_t *props)
354 1.28 jdc {
355 1.28 jdc struct lmtemp_softc *sc = sme->sme_cookie;
356 1.28 jdc uint32_t val;
357 1.28 jdc
358 1.28 jdc *props &= ~(PROP_CRITMAX);
359 1.28 jdc
360 1.29 jdc iic_acquire_bus(sc->sc_tag, 0);
361 1.28 jdc if (lmtemp_temp_read(sc, LM75_REG_TOS_SET_POINT, &val, 0) == 0) {
362 1.28 jdc limits->sel_critmax = val;
363 1.28 jdc *props |= PROP_CRITMAX;
364 1.28 jdc }
365 1.29 jdc iic_release_bus(sc->sc_tag, 0);
366 1.28 jdc }
367 1.28 jdc
368 1.28 jdc static void
369 1.28 jdc lmtemp_getlim_lm77(struct sysmon_envsys *sme, envsys_data_t *edata,
370 1.28 jdc sysmon_envsys_lim_t *limits, uint32_t *props)
371 1.28 jdc {
372 1.28 jdc struct lmtemp_softc *sc = sme->sme_cookie;
373 1.28 jdc uint32_t val;
374 1.28 jdc
375 1.28 jdc *props &= ~(PROP_CRITMAX | PROP_WARNMAX | PROP_WARNMIN);
376 1.28 jdc
377 1.29 jdc iic_acquire_bus(sc->sc_tag, 0);
378 1.28 jdc if (lmtemp_temp_read(sc, LM77_REG_TCRIT_SET_POINT, &val, 0) == 0) {
379 1.28 jdc limits->sel_critmax = val;
380 1.28 jdc *props |= PROP_CRITMAX;
381 1.28 jdc }
382 1.28 jdc if (lmtemp_temp_read(sc, LM77_REG_THIGH_SET_POINT, &val, 0) == 0) {
383 1.28 jdc limits->sel_warnmax = val;
384 1.28 jdc *props |= PROP_WARNMAX;
385 1.28 jdc }
386 1.28 jdc if (lmtemp_temp_read(sc, LM77_REG_TLOW_SET_POINT, &val, 0) == 0) {
387 1.28 jdc limits->sel_warnmin = val;
388 1.28 jdc *props |= PROP_WARNMIN;
389 1.28 jdc }
390 1.29 jdc iic_release_bus(sc->sc_tag, 0);
391 1.28 jdc }
392 1.28 jdc
393 1.28 jdc static void
394 1.28 jdc lmtemp_setlim_lm75(struct sysmon_envsys *sme, envsys_data_t *edata,
395 1.28 jdc sysmon_envsys_lim_t *limits, uint32_t *props)
396 1.28 jdc {
397 1.28 jdc struct lmtemp_softc *sc = sme->sme_cookie;
398 1.28 jdc int32_t limit;
399 1.28 jdc
400 1.28 jdc if (*props & PROP_CRITMAX) {
401 1.28 jdc if (limits == NULL) /* Restore defaults */
402 1.28 jdc limit = sc->sc_smax;
403 1.28 jdc else
404 1.28 jdc limit = limits->sel_critmax;
405 1.29 jdc iic_acquire_bus(sc->sc_tag, 0);
406 1.28 jdc lmtemp_temp_write(sc, LM75_REG_THYST_SET_POINT,
407 1.28 jdc limit - 5000000, 0);
408 1.28 jdc lmtemp_temp_write(sc, LM75_REG_TOS_SET_POINT, limit, 0);
409 1.29 jdc iic_release_bus(sc->sc_tag, 0);
410 1.28 jdc
411 1.28 jdc /* Synchronise sysctl */
412 1.28 jdc sc->sc_tmax = (limit - 273150000) / 1000000;
413 1.28 jdc }
414 1.28 jdc }
415 1.28 jdc
416 1.28 jdc static void
417 1.28 jdc lmtemp_setlim_lm77(struct sysmon_envsys *sme, envsys_data_t *edata,
418 1.28 jdc sysmon_envsys_lim_t *limits, uint32_t *props)
419 1.28 jdc {
420 1.28 jdc struct lmtemp_softc *sc = sme->sme_cookie;
421 1.28 jdc int32_t limit;
422 1.28 jdc
423 1.29 jdc iic_acquire_bus(sc->sc_tag, 0);
424 1.28 jdc if (*props & PROP_CRITMAX) {
425 1.28 jdc if (limits == NULL) /* Restore defaults */
426 1.29 jdc limit = sc->sc_scrit;
427 1.28 jdc else
428 1.28 jdc limit = limits->sel_critmax;
429 1.28 jdc lmtemp_temp_write(sc, LM77_REG_TCRIT_SET_POINT, limit, 0);
430 1.28 jdc }
431 1.28 jdc if (*props & PROP_WARNMAX) {
432 1.28 jdc if (limits == NULL) /* Restore defaults */
433 1.28 jdc limit = sc->sc_smax;
434 1.28 jdc else
435 1.28 jdc limit = limits->sel_warnmax;
436 1.28 jdc lmtemp_temp_write(sc, LM77_REG_THIGH_SET_POINT, limit, 0);
437 1.28 jdc }
438 1.28 jdc if (*props & PROP_WARNMIN) {
439 1.28 jdc if (limits == NULL) /* Restore defaults */
440 1.29 jdc limit = sc->sc_smin;
441 1.28 jdc else
442 1.28 jdc limit = limits->sel_warnmin;
443 1.28 jdc lmtemp_temp_write(sc, LM77_REG_TLOW_SET_POINT, limit, 0);
444 1.28 jdc }
445 1.29 jdc iic_release_bus(sc->sc_tag, 0);
446 1.28 jdc }
447 1.28 jdc
448 1.2 scw static uint32_t
449 1.27 jdc lmtemp_decode_lm75(const uint8_t *buf, int degc)
450 1.2 scw {
451 1.20 briggs int temp;
452 1.2 scw uint32_t val;
453 1.2 scw
454 1.20 briggs /*
455 1.20 briggs * LM75 temps are the most-significant 9 bits of a 16-bit reg.
456 1.20 briggs * sign-extend the MSB and add in the 0.5 from the LSB
457 1.20 briggs */
458 1.20 briggs temp = (int8_t) buf[0];
459 1.20 briggs temp = (temp << 1) + ((buf[1] >> 7) & 0x1);
460 1.2 scw
461 1.27 jdc /* Temp is given in 1/2 deg. C, we convert to C or uK. */
462 1.27 jdc if (degc)
463 1.27 jdc val = temp / 2;
464 1.27 jdc else
465 1.27 jdc val = temp * 500000 + 273150000;
466 1.2 scw
467 1.18 xtraeme return val;
468 1.2 scw }
469 1.2 scw
470 1.2 scw static uint32_t
471 1.27 jdc lmtemp_decode_ds75(const uint8_t *buf, int degc)
472 1.2 scw {
473 1.2 scw int temp;
474 1.2 scw
475 1.2 scw /*
476 1.2 scw * Sign-extend the MSB byte, and add in the fractions of a
477 1.7 riz * degree contained in the LSB (precision 1/16th DegC).
478 1.2 scw */
479 1.2 scw temp = (int8_t)buf[0];
480 1.2 scw temp = (temp << 4) | ((buf[1] >> 4) & 0xf);
481 1.2 scw
482 1.2 scw /*
483 1.27 jdc * Conversion to C or uK is simple.
484 1.2 scw */
485 1.27 jdc if (degc)
486 1.27 jdc return temp / 16;
487 1.27 jdc else
488 1.27 jdc return (temp * 62500 + 273150000);
489 1.2 scw }
490 1.2 scw
491 1.9 kiyohara static uint32_t
492 1.27 jdc lmtemp_decode_lm77(const uint8_t *buf, int degc)
493 1.9 kiyohara {
494 1.9 kiyohara int temp;
495 1.9 kiyohara uint32_t val;
496 1.9 kiyohara
497 1.9 kiyohara /*
498 1.9 kiyohara * Describe each bits of temperature registers on LM77.
499 1.9 kiyohara * D15 - D12: Sign
500 1.9 kiyohara * D11 - D3 : Bit8(MSB) - Bit0
501 1.9 kiyohara */
502 1.9 kiyohara temp = (int8_t)buf[0];
503 1.10 kiyohara temp = (temp << 5) | ((buf[1] >> 3) & 0x1f);
504 1.9 kiyohara
505 1.27 jdc /* Temp is given in 1/2 deg. C, we convert to C or uK. */
506 1.27 jdc if (degc)
507 1.27 jdc val = temp / 2;
508 1.27 jdc else
509 1.27 jdc val = temp * 500000 + 273150000;
510 1.9 kiyohara
511 1.18 xtraeme return val;
512 1.9 kiyohara }
513 1.9 kiyohara
514 1.28 jdc static void lmtemp_encode_lm75(const uint32_t val, uint8_t *buf, int degc)
515 1.28 jdc {
516 1.28 jdc int temp;
517 1.28 jdc
518 1.28 jdc /* Convert from C or uK to register format */
519 1.28 jdc if (degc)
520 1.28 jdc temp = val * 2;
521 1.28 jdc else
522 1.28 jdc temp = (val - 273150000) / 500000;
523 1.28 jdc buf[0] = (temp >> 1) & 0xff;
524 1.28 jdc buf[1] = (temp & 1) << 7;
525 1.28 jdc }
526 1.28 jdc
527 1.28 jdc static void lmtemp_encode_ds75(const uint32_t val, uint8_t *buf, int degc)
528 1.28 jdc {
529 1.28 jdc int temp;
530 1.28 jdc
531 1.28 jdc /* Convert from C or uK to register format */
532 1.28 jdc if (degc)
533 1.28 jdc temp = val * 16;
534 1.28 jdc else
535 1.28 jdc temp = (val - 273150000) / 62500;
536 1.28 jdc buf[0] = (temp >> 4) & 0xff;
537 1.28 jdc buf[1] = (temp & 0xf) << 4;
538 1.28 jdc }
539 1.28 jdc
540 1.28 jdc static void lmtemp_encode_lm77(const uint32_t val, uint8_t *buf, int degc)
541 1.28 jdc {
542 1.28 jdc int temp;
543 1.28 jdc
544 1.28 jdc /* Convert from C or uK to register format */
545 1.28 jdc if (degc)
546 1.28 jdc temp = val * 2;
547 1.28 jdc else
548 1.28 jdc temp = (val - 273150000) / 500000;
549 1.28 jdc buf[0] = (temp >> 5) & 0xff;
550 1.28 jdc buf[1] = (temp & 0x1f) << 3;
551 1.28 jdc }
552 1.28 jdc
553 1.23 macallan static void
554 1.23 macallan lmtemp_setup_sysctl(struct lmtemp_softc *sc)
555 1.23 macallan {
556 1.23 macallan const struct sysctlnode *me = NULL, *node = NULL;
557 1.23 macallan
558 1.23 macallan sysctl_createv(NULL, 0, NULL, &me,
559 1.23 macallan CTLFLAG_READWRITE,
560 1.23 macallan CTLTYPE_NODE, device_xname(sc->sc_dev), NULL,
561 1.23 macallan NULL, 0, NULL, 0,
562 1.23 macallan CTL_MACHDEP, CTL_CREATE, CTL_EOL);
563 1.23 macallan
564 1.23 macallan sysctl_createv(NULL, 0, NULL, &node,
565 1.23 macallan CTLFLAG_READWRITE | CTLFLAG_OWNDESC,
566 1.23 macallan CTLTYPE_INT, "temp", "Threshold temperature",
567 1.24 dsl sysctl_lm75_temp, 1, (void *)sc, 0,
568 1.23 macallan CTL_MACHDEP, me->sysctl_num, CTL_CREATE, CTL_EOL);
569 1.23 macallan }
570 1.23 macallan
571 1.23 macallan static int
572 1.23 macallan sysctl_lm75_temp(SYSCTLFN_ARGS)
573 1.23 macallan {
574 1.23 macallan struct sysctlnode node = *rnode;
575 1.23 macallan struct lmtemp_softc *sc = node.sysctl_data;
576 1.23 macallan int temp;
577 1.23 macallan
578 1.23 macallan if (newp) {
579 1.23 macallan
580 1.23 macallan /* we're asked to write */
581 1.23 macallan node.sysctl_data = &sc->sc_tmax;
582 1.23 macallan if (sysctl_lookup(SYSCTLFN_CALL(&node)) == 0) {
583 1.23 macallan
584 1.23 macallan temp = *(int *)node.sysctl_data;
585 1.23 macallan sc->sc_tmax = temp;
586 1.23 macallan iic_acquire_bus(sc->sc_tag, I2C_F_POLL);
587 1.23 macallan lmtemp_temp_write(sc, LM75_REG_THYST_SET_POINT,
588 1.28 jdc sc->sc_tmax - 5, 1);
589 1.23 macallan lmtemp_temp_write(sc, LM75_REG_TOS_SET_POINT,
590 1.28 jdc sc->sc_tmax, 1);
591 1.23 macallan iic_release_bus(sc->sc_tag, I2C_F_POLL);
592 1.28 jdc
593 1.28 jdc /* Synchronise envsys - calls lmtemp_getlim_lm75() */
594 1.28 jdc sysmon_envsys_update_limits(sc->sc_sme, &sc->sc_sensor);
595 1.23 macallan return 0;
596 1.23 macallan }
597 1.23 macallan return EINVAL;
598 1.23 macallan } else {
599 1.23 macallan
600 1.23 macallan node.sysctl_data = &sc->sc_tmax;
601 1.23 macallan node.sysctl_size = 4;
602 1.23 macallan return (sysctl_lookup(SYSCTLFN_CALL(&node)));
603 1.23 macallan }
604 1.23 macallan
605 1.23 macallan return 0;
606 1.23 macallan }
607 1.23 macallan
608 1.23 macallan SYSCTL_SETUP(sysctl_lmtemp_setup, "sysctl lmtemp subtree setup")
609 1.23 macallan {
610 1.23 macallan
611 1.23 macallan sysctl_createv(NULL, 0, NULL, NULL,
612 1.23 macallan CTLFLAG_PERMANENT,
613 1.23 macallan CTLTYPE_NODE, "machdep", NULL,
614 1.23 macallan NULL, 0, NULL, 0,
615 1.23 macallan CTL_MACHDEP, CTL_EOL);
616 1.23 macallan }
617 1.23 macallan
618 1.23 macallan
619