Home | History | Annotate | Line # | Download | only in i2o
dpti.c revision 1.30.2.1
      1  1.30.2.1      tron /*	$NetBSD: dpti.c,v 1.30.2.1 2006/12/04 18:34:16 tron Exp $	*/
      2       1.1        ad 
      3       1.1        ad /*-
      4       1.1        ad  * Copyright (c) 2001 The NetBSD Foundation, Inc.
      5       1.1        ad  * All rights reserved.
      6       1.1        ad  *
      7       1.1        ad  * This code is derived from software contributed to The NetBSD Foundation
      8       1.1        ad  * by Andrew Doran.
      9       1.1        ad  *
     10       1.1        ad  * Redistribution and use in source and binary forms, with or without
     11       1.1        ad  * modification, are permitted provided that the following conditions
     12       1.1        ad  * are met:
     13       1.1        ad  * 1. Redistributions of source code must retain the above copyright
     14       1.1        ad  *    notice, this list of conditions and the following disclaimer.
     15       1.1        ad  * 2. Redistributions in binary form must reproduce the above copyright
     16       1.1        ad  *    notice, this list of conditions and the following disclaimer in the
     17       1.1        ad  *    documentation and/or other materials provided with the distribution.
     18       1.1        ad  * 3. All advertising materials mentioning features or use of this software
     19       1.1        ad  *    must display the following acknowledgement:
     20       1.1        ad  *        This product includes software developed by the NetBSD
     21       1.1        ad  *        Foundation, Inc. and its contributors.
     22       1.1        ad  * 4. Neither the name of The NetBSD Foundation nor the names of its
     23       1.1        ad  *    contributors may be used to endorse or promote products derived
     24       1.1        ad  *    from this software without specific prior written permission.
     25       1.1        ad  *
     26       1.1        ad  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     27       1.1        ad  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     28       1.1        ad  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     29       1.1        ad  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     30       1.1        ad  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     31       1.1        ad  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     32       1.1        ad  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     33       1.1        ad  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     34       1.1        ad  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     35       1.1        ad  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     36       1.1        ad  * POSSIBILITY OF SUCH DAMAGE.
     37       1.1        ad  */
     38       1.1        ad 
     39       1.1        ad /*
     40       1.1        ad  * Copyright (c) 1996-2000 Distributed Processing Technology Corporation
     41       1.1        ad  * Copyright (c) 2000 Adaptec Corporation
     42       1.1        ad  * All rights reserved.
     43       1.1        ad  *
     44       1.1        ad  * TERMS AND CONDITIONS OF USE
     45       1.1        ad  *
     46       1.1        ad  * Redistribution and use in source form, with or without modification, are
     47       1.1        ad  * permitted provided that redistributions of source code must retain the
     48       1.1        ad  * above copyright notice, this list of conditions and the following disclaimer.
     49       1.1        ad  *
     50       1.1        ad  * This software is provided `as is' by Adaptec and any express or implied
     51       1.1        ad  * warranties, including, but not limited to, the implied warranties of
     52       1.1        ad  * merchantability and fitness for a particular purpose, are disclaimed. In no
     53       1.1        ad  * event shall Adaptec be liable for any direct, indirect, incidental, special,
     54       1.1        ad  * exemplary or consequential damages (including, but not limited to,
     55       1.1        ad  * procurement of substitute goods or services; loss of use, data, or profits;
     56       1.1        ad  * or business interruptions) however caused and on any theory of liability,
     57       1.1        ad  * whether in contract, strict liability, or tort (including negligence or
     58       1.1        ad  * otherwise) arising in any way out of the use of this driver software, even
     59       1.1        ad  * if advised of the possibility of such damage.
     60       1.1        ad  */
     61       1.1        ad 
     62       1.1        ad /*
     63       1.1        ad  * Adaptec/DPT I2O control interface.
     64       1.1        ad  */
     65       1.3     lukem 
     66       1.3     lukem #include <sys/cdefs.h>
     67  1.30.2.1      tron __KERNEL_RCSID(0, "$NetBSD: dpti.c,v 1.30.2.1 2006/12/04 18:34:16 tron Exp $");
     68       1.1        ad 
     69       1.1        ad #include "opt_i2o.h"
     70       1.1        ad 
     71       1.1        ad #include <sys/param.h>
     72       1.1        ad #include <sys/systm.h>
     73       1.1        ad #include <sys/kernel.h>
     74       1.1        ad #include <sys/device.h>
     75       1.1        ad #include <sys/queue.h>
     76       1.1        ad #include <sys/proc.h>
     77       1.1        ad #include <sys/endian.h>
     78       1.1        ad #include <sys/malloc.h>
     79       1.1        ad #include <sys/conf.h>
     80       1.1        ad #include <sys/ioctl.h>
     81      1.29      elad #include <sys/kauth.h>
     82       1.1        ad 
     83       1.2        ad #include <uvm/uvm_extern.h>
     84       1.2        ad 
     85       1.1        ad #include <machine/bus.h>
     86      1.11   thorpej #ifdef __i386__
     87       1.2        ad #include <machine/pio.h>
     88       1.2        ad #endif
     89       1.1        ad 
     90       1.1        ad #include <dev/i2o/i2o.h>
     91       1.1        ad #include <dev/i2o/i2odpt.h>
     92       1.1        ad #include <dev/i2o/iopio.h>
     93       1.1        ad #include <dev/i2o/iopvar.h>
     94       1.1        ad #include <dev/i2o/dptivar.h>
     95       1.1        ad 
     96       1.1        ad #ifdef I2ODEBUG
     97       1.1        ad #define	DPRINTF(x)		printf x
     98       1.1        ad #else
     99       1.1        ad #define	DPRINTF(x)
    100       1.1        ad #endif
    101       1.1        ad 
    102       1.1        ad static struct dpt_sig dpti_sig = {
    103       1.2        ad 	{ 'd', 'P', 't', 'S', 'i', 'G'},
    104       1.2        ad 	SIG_VERSION,
    105      1.11   thorpej #if defined(__i386__)
    106       1.2        ad 	PROC_INTEL,
    107      1.11   thorpej #elif defined(__powerpc__)
    108       1.2        ad 	PROC_POWERPC,
    109      1.11   thorpej #elif defined(__alpha__)
    110       1.2        ad 	PROC_ALPHA,
    111       1.4   thorpej #elif defined(__mips__)
    112       1.2        ad 	PROC_MIPS,
    113      1.11   thorpej #elif defined(__sparc64__)
    114       1.2        ad 	PROC_ULTRASPARC,
    115       1.2        ad #endif
    116      1.11   thorpej #if defined(__i386__)
    117       1.2        ad 	PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM,
    118       1.2        ad #else
    119       1.2        ad 	0,
    120       1.2        ad #endif
    121       1.2        ad 	FT_HBADRVR,
    122       1.2        ad 	0,
    123       1.2        ad 	OEM_DPT,
    124       1.2        ad 	OS_FREE_BSD,	/* XXX */
    125       1.2        ad 	CAP_ABOVE16MB,
    126       1.2        ad 	DEV_ALL,
    127       1.1        ad 	ADF_ALL_SC5,
    128       1.2        ad 	0,
    129       1.2        ad 	0,
    130       1.2        ad 	DPTI_VERSION,
    131       1.2        ad 	DPTI_REVISION,
    132       1.2        ad 	DPTI_SUBREVISION,
    133       1.2        ad 	DPTI_MONTH,
    134       1.2        ad 	DPTI_DAY,
    135       1.2        ad 	DPTI_YEAR,
    136       1.2        ad 	""		/* Will be filled later */
    137       1.1        ad };
    138       1.1        ad 
    139       1.1        ad void	dpti_attach(struct device *, struct device *, void *);
    140       1.1        ad int	dpti_blinkled(struct dpti_softc *);
    141      1.10        ad int	dpti_ctlrinfo(struct dpti_softc *, int, caddr_t);
    142       1.1        ad int	dpti_match(struct device *, struct cfdata *, void *);
    143       1.1        ad int	dpti_passthrough(struct dpti_softc *, caddr_t, struct proc *);
    144      1.10        ad int	dpti_sysinfo(struct dpti_softc *, int, caddr_t);
    145       1.1        ad 
    146       1.5   gehenna dev_type_open(dptiopen);
    147       1.5   gehenna dev_type_ioctl(dptiioctl);
    148       1.5   gehenna 
    149       1.5   gehenna const struct cdevsw dpti_cdevsw = {
    150       1.5   gehenna 	dptiopen, nullclose, noread, nowrite, dptiioctl,
    151      1.26  christos 	nostop, notty, nopoll, nommap, nokqfilter, D_OTHER,
    152       1.5   gehenna };
    153       1.1        ad 
    154       1.1        ad extern struct cfdriver dpti_cd;
    155       1.1        ad 
    156       1.7   thorpej CFATTACH_DECL(dpti, sizeof(struct dpti_softc),
    157       1.8   thorpej     dpti_match, dpti_attach, NULL, NULL);
    158       1.1        ad 
    159       1.1        ad int
    160      1.30  christos dpti_match(struct device *parent, struct cfdata *match, void *aux)
    161       1.1        ad {
    162       1.1        ad 	struct iop_attach_args *ia;
    163       1.1        ad 	struct iop_softc *iop;
    164       1.1        ad 
    165       1.1        ad 	ia = aux;
    166       1.1        ad 	iop = (struct iop_softc *)parent;
    167       1.1        ad 
    168       1.1        ad 	if (ia->ia_class != I2O_CLASS_ANY || ia->ia_tid != I2O_TID_IOP)
    169       1.1        ad 		return (0);
    170       1.1        ad 
    171       1.1        ad 	if (le16toh(iop->sc_status.orgid) != I2O_ORG_DPT)
    172       1.1        ad 		return (0);
    173       1.1        ad 
    174       1.1        ad 	return (1);
    175       1.1        ad }
    176       1.1        ad 
    177       1.1        ad void
    178      1.30  christos dpti_attach(struct device *parent, struct device *self, void *aux)
    179       1.1        ad {
    180       1.1        ad 	struct iop_softc *iop;
    181       1.1        ad 	struct dpti_softc *sc;
    182       1.1        ad 	struct {
    183       1.1        ad 		struct	i2o_param_op_results pr;
    184       1.1        ad 		struct	i2o_param_read_results prr;
    185       1.1        ad 		struct	i2o_dpt_param_exec_iop_buffers dib;
    186       1.1        ad 	} __attribute__ ((__packed__)) param;
    187       1.1        ad 	int rv;
    188       1.1        ad 
    189      1.24   thorpej 	sc = device_private(self);
    190      1.24   thorpej 	iop = device_private(parent);
    191       1.1        ad 
    192       1.1        ad 	/*
    193       1.1        ad 	 * Tell the world what we are.  The description in the signature
    194       1.1        ad 	 * must be no more than 46 bytes long (see dptivar.h).
    195       1.1        ad 	 */
    196       1.2        ad 	printf(": DPT/Adaptec RAID management interface\n");
    197      1.18    itojun 	snprintf(dpti_sig.dsDescription, sizeof(dpti_sig.dsDescription),
    198      1.18    itojun 	    "NetBSD %s I2O OSM", osrelease);
    199       1.1        ad 
    200       1.1        ad 	rv = iop_field_get_all(iop, I2O_TID_IOP,
    201       1.1        ad 	    I2O_DPT_PARAM_EXEC_IOP_BUFFERS, &param,
    202       1.1        ad 	    sizeof(param), NULL);
    203       1.1        ad 	if (rv != 0)
    204       1.1        ad 		return;
    205       1.1        ad 
    206       1.1        ad 	sc->sc_blinkled = le32toh(param.dib.serialoutputoff) + 8;
    207       1.1        ad }
    208       1.1        ad 
    209       1.1        ad int
    210      1.30  christos dptiopen(dev_t dev, int flag, int mode,
    211      1.30  christos     struct lwp *l)
    212       1.1        ad {
    213       1.1        ad 
    214       1.1        ad 	if (device_lookup(&dpti_cd, minor(dev)) == NULL)
    215       1.1        ad 		return (ENXIO);
    216       1.1        ad 
    217       1.1        ad 	return (0);
    218       1.1        ad }
    219       1.1        ad 
    220       1.1        ad int
    221      1.30  christos dptiioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct lwp *l)
    222       1.1        ad {
    223       1.1        ad 	struct iop_softc *iop;
    224       1.1        ad 	struct dpti_softc *sc;
    225       1.1        ad 	struct ioctl_pt *pt;
    226      1.10        ad 	int i, size, rv, linux;
    227       1.1        ad 
    228       1.1        ad 	sc = device_lookup(&dpti_cd, minor(dev));
    229      1.22   thorpej 	iop = (struct iop_softc *)device_parent(&sc->sc_dv);
    230      1.17        ad 	rv = 0;
    231       1.1        ad 
    232       1.1        ad 	if (cmd == PTIOCLINUX) {
    233       1.1        ad 		pt = (struct ioctl_pt *)data;
    234      1.10        ad 		size = IOCPARM_LEN(pt->com);
    235      1.10        ad 		cmd = pt->com & 0xffff;
    236       1.1        ad 		data = pt->data;
    237      1.10        ad 		linux = 1;
    238      1.10        ad 	} else {
    239      1.10        ad 		size = IOCPARM_LEN(cmd);
    240      1.10        ad 		cmd = cmd & 0xffff;
    241      1.10        ad 		linux = 0;
    242      1.10        ad 	}
    243       1.1        ad 
    244      1.10        ad 	switch (cmd) {
    245       1.1        ad 	case DPT_SIGNATURE:
    246       1.1        ad 		if (size > sizeof(dpti_sig))
    247       1.1        ad 			size = sizeof(dpti_sig);
    248       1.1        ad 		memcpy(data, &dpti_sig, size);
    249      1.17        ad 		break;
    250       1.1        ad 
    251       1.1        ad 	case DPT_CTRLINFO:
    252      1.17        ad 		rv = dpti_ctlrinfo(sc, size, data);
    253      1.17        ad 		break;
    254       1.1        ad 
    255       1.1        ad 	case DPT_SYSINFO:
    256      1.17        ad 		rv = dpti_sysinfo(sc, size, data);
    257      1.17        ad 		break;
    258       1.1        ad 
    259       1.1        ad 	case DPT_BLINKLED:
    260       1.1        ad 		if ((i = dpti_blinkled(sc)) == -1)
    261       1.1        ad 			i = 0;
    262       1.1        ad 
    263      1.17        ad 		if (size == 0) {
    264      1.17        ad 			rv = copyout(&i, *(caddr_t *)data, sizeof(i));
    265      1.17        ad 			break;
    266      1.17        ad 		}
    267       1.1        ad 
    268       1.1        ad 		*(int *)data = i;
    269      1.17        ad 		break;
    270       1.1        ad 
    271       1.1        ad 	case DPT_TARGET_BUSY:
    272       1.1        ad 		/*
    273       1.1        ad 		 * XXX This is here to stop linux_machdepioctl() from
    274      1.10        ad 		 * whining about an unknown ioctl.
    275       1.1        ad 		 */
    276      1.17        ad 		rv = EIO;
    277      1.17        ad 		break;
    278       1.1        ad 
    279       1.1        ad 	case DPT_I2OUSRCMD:
    280  1.30.2.1      tron 		rv = kauth_authorize_device_passthru(l->l_cred, dev,
    281  1.30.2.1      tron 		    KAUTH_REQ_DEVICE_RAWIO_PASSTHRU_ALL, data);
    282      1.29      elad 		if (rv)
    283      1.25  christos 			break;
    284      1.25  christos 
    285       1.2        ad 		if (sc->sc_nactive++ >= 2)
    286       1.2        ad 			tsleep(&sc->sc_nactive, PRIBIO, "dptislp", 0);
    287       1.2        ad 
    288      1.10        ad 		if (linux)
    289      1.21  christos 			rv = dpti_passthrough(sc, data, l->l_proc);
    290      1.10        ad 		else
    291      1.21  christos 			rv = dpti_passthrough(sc, *(caddr_t *)data, l->l_proc);
    292       1.2        ad 
    293       1.2        ad 		sc->sc_nactive--;
    294       1.2        ad 		wakeup_one(&sc->sc_nactive);
    295      1.17        ad 		break;
    296       1.1        ad 
    297       1.1        ad 	case DPT_I2ORESETCMD:
    298       1.1        ad 		printf("%s: I2ORESETCMD not implemented\n",
    299       1.1        ad 		    sc->sc_dv.dv_xname);
    300      1.17        ad 		rv = EOPNOTSUPP;
    301      1.17        ad 		break;
    302       1.1        ad 
    303       1.1        ad 	case DPT_I2ORESCANCMD:
    304      1.17        ad 		if ((rv = lockmgr(&iop->sc_conflock, LK_EXCLUSIVE, NULL)) != 0)
    305      1.17        ad 			break;
    306      1.17        ad 		rv = iop_reconfigure(iop, 0);
    307      1.17        ad 		lockmgr(&iop->sc_conflock, LK_RELEASE, NULL);
    308      1.17        ad 		break;
    309       1.1        ad 
    310       1.1        ad 	default:
    311      1.17        ad 		rv = ENOTTY;
    312      1.17        ad 		break;
    313       1.1        ad 	}
    314      1.17        ad 
    315      1.17        ad 	return (rv);
    316       1.1        ad }
    317       1.1        ad 
    318       1.1        ad int
    319       1.1        ad dpti_blinkled(struct dpti_softc *sc)
    320       1.1        ad {
    321       1.1        ad 	struct iop_softc *iop;
    322       1.1        ad 	u_int v;
    323       1.1        ad 
    324      1.22   thorpej 	iop = (struct iop_softc *)device_parent(&sc->sc_dv);
    325       1.1        ad 
    326       1.1        ad 	v = bus_space_read_1(iop->sc_iot, iop->sc_ioh, sc->sc_blinkled + 0);
    327       1.1        ad 	if (v == 0xbc) {
    328       1.1        ad 		v = bus_space_read_1(iop->sc_iot, iop->sc_ioh,
    329       1.1        ad 		    sc->sc_blinkled + 1);
    330       1.1        ad 		return (v);
    331       1.1        ad 	}
    332       1.1        ad 
    333       1.1        ad 	return (-1);
    334       1.1        ad }
    335       1.1        ad 
    336       1.1        ad int
    337      1.10        ad dpti_ctlrinfo(struct dpti_softc *sc, int size, caddr_t data)
    338       1.1        ad {
    339       1.2        ad 	struct dpt_ctlrinfo info;
    340       1.1        ad 	struct iop_softc *iop;
    341       1.1        ad 	int rv, i;
    342       1.1        ad 
    343      1.22   thorpej 	iop = (struct iop_softc *)device_parent(&sc->sc_dv);
    344       1.1        ad 
    345       1.2        ad 	memset(&info, 0, sizeof(info));
    346       1.1        ad 
    347       1.2        ad 	info.length = sizeof(info) - sizeof(u_int16_t);
    348      1.23   thorpej 	info.drvrHBAnum = device_unit(&sc->sc_dv);
    349       1.2        ad 	info.baseAddr = iop->sc_memaddr;
    350       1.1        ad 	if ((i = dpti_blinkled(sc)) == -1)
    351       1.1        ad 		i = 0;
    352       1.2        ad 	info.blinkState = i;
    353       1.2        ad 	info.pciBusNum = iop->sc_pcibus;
    354       1.2        ad 	info.pciDeviceNum = iop->sc_pcidev;
    355       1.2        ad 	info.hbaFlags = FLG_OSD_PCI_VALID | FLG_OSD_DMA | FLG_OSD_I2O;
    356       1.2        ad 	info.Interrupt = 10;			/* XXX */
    357       1.1        ad 
    358      1.10        ad 	if (size > sizeof(*data)) {
    359      1.10        ad 		memcpy(data, &info, min(sizeof(info), size));
    360       1.1        ad 		rv = 0;
    361       1.1        ad 	} else
    362       1.2        ad 		rv = copyout(&info, *(caddr_t *)data, sizeof(info));
    363       1.1        ad 
    364       1.1        ad 	return (rv);
    365       1.1        ad }
    366       1.1        ad 
    367       1.1        ad int
    368      1.30  christos dpti_sysinfo(struct dpti_softc *sc, int size, caddr_t data)
    369       1.1        ad {
    370       1.2        ad 	struct dpt_sysinfo info;
    371       1.2        ad 	int rv;
    372      1.11   thorpej #ifdef __i386__
    373       1.2        ad 	int i, j;
    374       1.2        ad #endif
    375       1.2        ad 
    376       1.2        ad 	memset(&info, 0, sizeof(info));
    377       1.2        ad 
    378      1.11   thorpej #ifdef __i386__
    379       1.2        ad 	outb (0x70, 0x12);
    380       1.2        ad 	i = inb(0x71);
    381       1.2        ad 	j = i >> 4;
    382       1.2        ad 	if (i == 0x0f) {
    383       1.2        ad 		outb (0x70, 0x19);
    384       1.2        ad 		j = inb (0x71);
    385       1.2        ad 	}
    386       1.2        ad 	info.drive0CMOS = j;
    387       1.2        ad 
    388       1.2        ad 	j = i & 0x0f;
    389       1.2        ad 	if (i == 0x0f) {
    390       1.2        ad 		outb (0x70, 0x1a);
    391       1.2        ad 		j = inb (0x71);
    392       1.2        ad 	}
    393       1.2        ad 	info.drive1CMOS = j;
    394       1.2        ad 	info.processorFamily = dpti_sig.dsProcessorFamily;
    395       1.2        ad 
    396       1.2        ad 	/*
    397       1.2        ad 	 * Get the conventional memory size from CMOS.
    398       1.2        ad 	 */
    399       1.2        ad 	outb(0x70, 0x16);
    400       1.2        ad 	j = inb(0x71);
    401       1.2        ad 	j <<= 8;
    402       1.2        ad 	outb(0x70, 0x15);
    403       1.2        ad 	j |= inb(0x71);
    404       1.2        ad 	info.conventionalMemSize = j;
    405       1.2        ad 
    406       1.2        ad 	/*
    407       1.2        ad 	 * Get the extended memory size from CMOS.
    408       1.2        ad 	 */
    409       1.2        ad 	outb(0x70, 0x31);
    410       1.2        ad 	j = inb(0x71);
    411       1.2        ad 	j <<= 8;
    412       1.2        ad 	outb(0x70, 0x30);
    413       1.2        ad 	j |= inb(0x71);
    414       1.2        ad 	info.extendedMemSize = j;
    415       1.2        ad 
    416       1.2        ad 	switch (cpu_class) {
    417       1.2        ad 	case CPUCLASS_386:
    418       1.2        ad 		info.processorType = PROC_386;
    419       1.2        ad 		break;
    420       1.2        ad 	case CPUCLASS_486:
    421       1.2        ad 		info.processorType = PROC_486;
    422       1.2        ad 		break;
    423       1.2        ad 	case CPUCLASS_586:
    424       1.2        ad 		info.processorType = PROC_PENTIUM;
    425       1.2        ad 		break;
    426       1.2        ad 	case CPUCLASS_686:
    427       1.2        ad 	default:
    428       1.2        ad 		info.processorType = PROC_SEXIUM;
    429       1.2        ad 		break;
    430       1.2        ad 	}
    431       1.2        ad 
    432       1.2        ad 	info.flags = SI_CMOS_Valid | SI_BusTypeValid |
    433       1.2        ad 	    SI_MemorySizeValid | SI_NO_SmartROM;
    434       1.2        ad #else
    435       1.2        ad 	info.flags = SI_BusTypeValid | SI_NO_SmartROM;
    436       1.2        ad #endif
    437       1.2        ad 
    438       1.2        ad 	info.busType = SI_PCI_BUS;
    439       1.1        ad 
    440       1.1        ad 	/*
    441       1.2        ad 	 * Copy out the info structure to the user.
    442       1.1        ad 	 */
    443      1.10        ad 	if (size > sizeof(*data)) {
    444      1.10        ad 		memcpy(data, &info, min(sizeof(info), size));
    445       1.2        ad 		rv = 0;
    446       1.2        ad 	} else
    447       1.2        ad 		rv = copyout(&info, *(caddr_t *)data, sizeof(info));
    448       1.2        ad 
    449       1.2        ad 	return (rv);
    450       1.1        ad }
    451       1.1        ad 
    452       1.1        ad int
    453       1.1        ad dpti_passthrough(struct dpti_softc *sc, caddr_t data, struct proc *proc)
    454       1.1        ad {
    455       1.1        ad 	struct iop_softc *iop;
    456       1.1        ad 	struct i2o_msg mh, *mf;
    457       1.1        ad 	struct i2o_reply rh;
    458       1.1        ad 	struct iop_msg *im;
    459       1.1        ad 	struct dpti_ptbuf bufs[IOP_MAX_MSG_XFERS];
    460       1.1        ad 	u_int32_t mbtmp[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)];
    461       1.1        ad 	u_int32_t rbtmp[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)];
    462       1.2        ad 	int rv, msgsize, repsize, sgoff, i, mapped, nbuf, nfrag, j, sz;
    463      1.16    simonb 	u_int32_t *p, *pmax;
    464       1.1        ad 
    465      1.22   thorpej 	iop = (struct iop_softc *)device_parent(&sc->sc_dv);
    466       1.2        ad 	im = NULL;
    467       1.1        ad 
    468       1.1        ad 	if ((rv = dpti_blinkled(sc)) != -1) {
    469       1.1        ad 		if (rv != 0) {
    470       1.1        ad 			printf("%s: adapter blinkled = 0x%02x\n",
    471       1.1        ad 			    sc->sc_dv.dv_xname, rv);
    472       1.1        ad 			return (EIO);
    473       1.1        ad 		}
    474       1.1        ad 	}
    475       1.1        ad 
    476       1.1        ad 	/*
    477       1.1        ad 	 * Copy in the message frame header and determine the size of the
    478       1.1        ad 	 * full message frame.
    479       1.1        ad 	 */
    480       1.1        ad 	if ((rv = copyin(data, &mh, sizeof(mh))) != 0) {
    481       1.1        ad 		DPRINTF(("%s: message copyin failed\n",
    482       1.1        ad 		    sc->sc_dv.dv_xname));
    483       1.1        ad 		return (rv);
    484       1.1        ad 	}
    485       1.1        ad 
    486       1.1        ad 	msgsize = (mh.msgflags >> 14) & ~3;
    487       1.1        ad 	if (msgsize < sizeof(mh) || msgsize >= IOP_MAX_MSG_SIZE) {
    488       1.1        ad 		DPRINTF(("%s: bad message frame size\n",
    489       1.1        ad 		    sc->sc_dv.dv_xname));
    490       1.1        ad 		return (EINVAL);
    491       1.1        ad 	}
    492       1.1        ad 
    493       1.1        ad 	/*
    494       1.1        ad 	 * Handle special commands.
    495       1.1        ad 	 */
    496       1.1        ad 	switch (mh.msgfunc >> 24) {
    497       1.1        ad 	case I2O_EXEC_IOP_RESET:
    498       1.2        ad 		printf("%s: I2O_EXEC_IOP_RESET not implemented\n",
    499       1.1        ad 		    sc->sc_dv.dv_xname);
    500       1.2        ad 		return (EOPNOTSUPP);
    501       1.1        ad 
    502       1.1        ad 	case I2O_EXEC_OUTBOUND_INIT:
    503       1.2        ad 		printf("%s: I2O_EXEC_OUTBOUND_INIT not implemented\n",
    504       1.1        ad 		    sc->sc_dv.dv_xname);
    505       1.2        ad 		return (EOPNOTSUPP);
    506       1.1        ad 
    507       1.1        ad 	case I2O_EXEC_SYS_TAB_SET:
    508       1.2        ad 		printf("%s: I2O_EXEC_SYS_TAB_SET not implemented\n",
    509       1.1        ad 		    sc->sc_dv.dv_xname);
    510       1.2        ad 		return (EOPNOTSUPP);
    511       1.1        ad 
    512       1.1        ad 	case I2O_EXEC_STATUS_GET:
    513       1.2        ad 		if ((rv = iop_status_get(iop, 0)) == 0)
    514       1.2        ad 			rv = copyout(&iop->sc_status, data + msgsize,
    515       1.2        ad 			    sizeof(iop->sc_status));
    516       1.1        ad 		return (rv);
    517       1.1        ad 	}
    518       1.1        ad 
    519       1.1        ad 	/*
    520       1.1        ad 	 * Copy in the full message frame.
    521       1.1        ad 	 */
    522       1.1        ad 	if ((rv = copyin(data, mbtmp, msgsize)) != 0) {
    523       1.1        ad 		DPRINTF(("%s: full message copyin failed\n",
    524       1.1        ad 		    sc->sc_dv.dv_xname));
    525       1.1        ad 		return (rv);
    526       1.1        ad 	}
    527       1.1        ad 
    528       1.1        ad 	/*
    529       1.1        ad 	 * Determine the size of the reply frame, and copy it in.
    530       1.1        ad 	 */
    531       1.1        ad 	if ((rv = copyin(data + msgsize, &rh, sizeof(rh))) != 0) {
    532       1.1        ad 		DPRINTF(("%s: reply copyin failed\n",
    533       1.1        ad 		    sc->sc_dv.dv_xname));
    534       1.1        ad 		return (rv);
    535       1.1        ad 	}
    536       1.1        ad 
    537       1.1        ad 	repsize = (rh.msgflags >> 14) & ~3;
    538       1.1        ad 	if (repsize < sizeof(rh) || repsize >= IOP_MAX_MSG_SIZE) {
    539       1.1        ad 		DPRINTF(("%s: bad reply header size\n",
    540       1.1        ad 		    sc->sc_dv.dv_xname));
    541       1.1        ad 		return (EINVAL);
    542       1.1        ad 	}
    543       1.1        ad 
    544       1.1        ad 	if ((rv = copyin(data + msgsize, rbtmp, repsize)) != 0) {
    545       1.1        ad 		DPRINTF(("%s: reply too large\n", sc->sc_dv.dv_xname));
    546       1.1        ad 		return (rv);
    547       1.1        ad 	}
    548       1.1        ad 
    549       1.1        ad 	/*
    550       1.1        ad 	 * If the message has a scatter gather list, it must be comprised of
    551       1.1        ad 	 * simple elements.  If any one transfer contains multiple segments,
    552       1.1        ad 	 * we allocate a temporary buffer for it; otherwise, the buffer will
    553       1.2        ad 	 * be mapped directly.
    554       1.1        ad 	 */
    555      1.20     fredb 	mapped = 0;
    556       1.1        ad 	if ((sgoff = ((mh.msgflags >> 4) & 15)) != 0) {
    557       1.1        ad 		if ((sgoff + 2) > (msgsize >> 2)) {
    558       1.1        ad 			DPRINTF(("%s: invalid message size fields\n",
    559       1.1        ad 			    sc->sc_dv.dv_xname));
    560       1.1        ad 			return (EINVAL);
    561       1.1        ad 		}
    562       1.2        ad 
    563       1.2        ad 		memset(bufs, 0, sizeof(bufs));
    564       1.2        ad 
    565       1.1        ad 		p = mbtmp + sgoff;
    566       1.2        ad 		pmax = mbtmp + (msgsize >> 2) - 2;
    567       1.1        ad 
    568       1.2        ad 		for (nbuf = 0; nbuf < IOP_MAX_MSG_XFERS; nbuf++, p += 2) {
    569       1.2        ad 			if (p > pmax) {
    570       1.1        ad 				DPRINTF(("%s: invalid SGL (1)\n",
    571       1.1        ad 				    sc->sc_dv.dv_xname));
    572       1.2        ad 				goto bad;
    573       1.1        ad 			}
    574       1.1        ad 
    575       1.1        ad 			if ((p[0] & 0x30000000) != I2O_SGL_SIMPLE) {
    576       1.1        ad 				DPRINTF(("%s: invalid SGL (2)\n",
    577       1.1        ad 				    sc->sc_dv.dv_xname));
    578       1.2        ad 				goto bad;
    579       1.1        ad 			}
    580       1.1        ad 
    581       1.1        ad 			bufs[nbuf].db_out = (p[0] & I2O_SGL_DATA_OUT) != 0;
    582       1.2        ad 			bufs[nbuf].db_ptr = NULL;
    583       1.1        ad 
    584       1.1        ad 			if ((p[0] & I2O_SGL_END_BUFFER) != 0) {
    585       1.1        ad 				if ((p[0] & 0x00ffffff) > IOP_MAX_XFER) {
    586       1.1        ad 					DPRINTF(("%s: buffer too large\n",
    587       1.1        ad 					    sc->sc_dv.dv_xname));
    588       1.2        ad 					goto bad;
    589       1.1        ad 				}
    590       1.1        ad 
    591       1.1        ad 				bufs[nbuf].db_ptr = (caddr_t)p[1];
    592       1.1        ad 				bufs[nbuf].db_proc = proc;
    593       1.1        ad 				bufs[nbuf].db_size = p[0] & 0x00ffffff;
    594       1.1        ad 
    595       1.1        ad 				if ((p[0] & I2O_SGL_END) != 0)
    596       1.1        ad 					break;
    597       1.1        ad 
    598       1.1        ad 				continue;
    599       1.1        ad 			}
    600       1.1        ad 
    601       1.2        ad 			/*
    602       1.2        ad 			 * The buffer has multiple segments.  Determine the
    603       1.2        ad 			 * total size.
    604       1.2        ad 			 */
    605       1.2        ad 			nfrag = 0;
    606       1.2        ad 			sz = 0;
    607      1.16    simonb 			for (; p <= pmax; p += 2) {
    608       1.2        ad 				if (nfrag == DPTI_MAX_SEGS) {
    609       1.2        ad 					DPRINTF(("%s: too many segments\n",
    610       1.2        ad 					    sc->sc_dv.dv_xname));
    611       1.2        ad 					goto bad;
    612       1.2        ad 				}
    613       1.2        ad 
    614       1.2        ad 				bufs[nbuf].db_frags[nfrag].iov_len =
    615       1.2        ad 				    p[0] & 0x00ffffff;
    616      1.19     perry 				bufs[nbuf].db_frags[nfrag].iov_base =
    617       1.2        ad 				    (void *)p[1];
    618       1.2        ad 
    619       1.2        ad 				sz += p[0] & 0x00ffffff;
    620       1.2        ad 				nfrag++;
    621       1.2        ad 
    622       1.2        ad 				if ((p[0] & I2O_SGL_END) != 0) {
    623       1.2        ad 					if ((p[0] & I2O_SGL_END_BUFFER) == 0) {
    624       1.2        ad 						DPRINTF((
    625       1.2        ad 						    "%s: invalid SGL (3)\n",
    626       1.2        ad 						    sc->sc_dv.dv_xname));
    627       1.2        ad 						goto bad;
    628       1.2        ad 					}
    629       1.2        ad 					break;
    630       1.2        ad 				}
    631       1.2        ad 				if ((p[0] & I2O_SGL_END_BUFFER) != 0)
    632       1.2        ad 					break;
    633       1.2        ad 			}
    634       1.2        ad 			bufs[nbuf].db_nfrag = nfrag;
    635       1.2        ad 
    636       1.2        ad 			if (p > pmax) {
    637       1.2        ad 				DPRINTF(("%s: invalid SGL (4)\n",
    638       1.2        ad 				    sc->sc_dv.dv_xname));
    639       1.2        ad 				goto bad;
    640       1.2        ad 			}
    641       1.2        ad 
    642       1.2        ad 			if (sz > IOP_MAX_XFER) {
    643       1.2        ad 				DPRINTF(("%s: buffer too large\n",
    644       1.2        ad 				    sc->sc_dv.dv_xname));
    645       1.2        ad 				goto bad;
    646       1.2        ad 			}
    647       1.2        ad 
    648       1.2        ad 			bufs[nbuf].db_size = sz;
    649       1.2        ad 			bufs[nbuf].db_ptr = malloc(sz, M_DEVBUF, M_WAITOK);
    650       1.2        ad 			if (bufs[nbuf].db_ptr == NULL) {
    651       1.2        ad 				DPRINTF(("%s: allocation failure\n",
    652       1.2        ad 				    sc->sc_dv.dv_xname));
    653       1.2        ad 				rv = ENOMEM;
    654       1.2        ad 				goto bad;
    655       1.2        ad 			}
    656       1.2        ad 
    657       1.2        ad 			for (i = 0, sz = 0; i < bufs[nbuf].db_nfrag; i++) {
    658       1.2        ad 				rv = copyin(bufs[nbuf].db_frags[i].iov_base,
    659       1.2        ad 				    bufs[nbuf].db_ptr + sz,
    660       1.2        ad 				    bufs[nbuf].db_frags[i].iov_len);
    661       1.2        ad 				if (rv != 0) {
    662       1.2        ad 					DPRINTF(("%s: frag copyin\n",
    663       1.2        ad 					    sc->sc_dv.dv_xname));
    664       1.2        ad 					goto bad;
    665       1.2        ad 				}
    666       1.2        ad 				sz += bufs[nbuf].db_frags[i].iov_len;
    667       1.2        ad 			}
    668       1.2        ad 
    669       1.2        ad 			if ((p[0] & I2O_SGL_END) != 0)
    670       1.2        ad 				break;
    671       1.1        ad 		}
    672       1.1        ad 
    673       1.1        ad 		if (nbuf == IOP_MAX_MSG_XFERS) {
    674       1.1        ad 			DPRINTF(("%s: too many transfers\n",
    675       1.1        ad 			    sc->sc_dv.dv_xname));
    676       1.2        ad 			goto bad;
    677       1.1        ad 		}
    678      1.15   mycroft 	} else
    679      1.15   mycroft 		nbuf = -1;
    680       1.1        ad 
    681       1.1        ad 	/*
    682       1.1        ad 	 * Allocate a wrapper, and adjust the message header fields to
    683       1.1        ad 	 * indicate that no scatter-gather list is currently present.
    684       1.1        ad 	 */
    685       1.2        ad 
    686       1.1        ad 	im = iop_msg_alloc(iop, IM_WAIT | IM_NOSTATUS);
    687       1.1        ad 	im->im_rb = (struct i2o_reply *)rbtmp;
    688       1.1        ad 	mf = (struct i2o_msg *)mbtmp;
    689       1.1        ad 	mf->msgictx = IOP_ICTX;
    690       1.1        ad 	mf->msgtctx = im->im_tctx;
    691       1.1        ad 
    692       1.1        ad 	if (sgoff != 0)
    693       1.1        ad 		mf->msgflags = (mf->msgflags & 0xff0f) | (sgoff << 16);
    694       1.1        ad 
    695       1.1        ad 	/*
    696       1.1        ad 	 * Map the data transfer(s).
    697       1.1        ad 	 */
    698       1.1        ad 	for (i = 0; i <= nbuf; i++) {
    699       1.1        ad 		rv = iop_msg_map(iop, im, mbtmp, bufs[i].db_ptr,
    700       1.1        ad 		    bufs[i].db_size, bufs[i].db_out, bufs[i].db_proc);
    701       1.1        ad 		if (rv != 0) {
    702       1.2        ad 			DPRINTF(("%s: msg_map failed, rv = %d\n",
    703       1.2        ad 			    sc->sc_dv.dv_xname, rv));
    704       1.1        ad 			goto bad;
    705       1.1        ad 		}
    706       1.1        ad 		mapped = 1;
    707       1.1        ad 	}
    708       1.1        ad 
    709       1.1        ad 	/*
    710       1.1        ad 	 * Start the command and sleep until it completes.
    711       1.1        ad 	 */
    712       1.1        ad 	if ((rv = iop_msg_post(iop, im, mbtmp, 5*60*1000)) != 0)
    713       1.1        ad 		goto bad;
    714       1.1        ad 
    715       1.1        ad 	/*
    716       1.1        ad 	 * Copy out the reply frame.
    717       1.1        ad 	 */
    718      1.27  christos 	if ((rv = copyout(rbtmp, data + msgsize, repsize)) != 0) {
    719       1.1        ad 		DPRINTF(("%s: reply copyout() failed\n",
    720       1.1        ad 		    sc->sc_dv.dv_xname));
    721      1.27  christos 	}
    722       1.1        ad 
    723       1.1        ad  bad:
    724       1.2        ad 	/*
    725       1.2        ad 	 * Free resources and return to the caller.
    726       1.2        ad 	 */
    727       1.2        ad 	if (im != NULL) {
    728       1.2        ad 		if (mapped)
    729       1.2        ad 			iop_msg_unmap(iop, im);
    730       1.2        ad 		iop_msg_free(iop, im);
    731       1.2        ad 	}
    732       1.2        ad 
    733       1.2        ad 	for (i = 0; i <= nbuf; i++) {
    734       1.2        ad 		if (bufs[i].db_proc != NULL)
    735       1.2        ad 			continue;
    736       1.2        ad 
    737       1.2        ad 		if (!bufs[i].db_out && rv == 0) {
    738       1.2        ad 			for (j = 0, sz = 0; j < bufs[i].db_nfrag; j++) {
    739       1.2        ad 				rv = copyout(bufs[i].db_ptr + sz,
    740       1.2        ad 				    bufs[i].db_frags[j].iov_base,
    741       1.2        ad 				    bufs[i].db_frags[j].iov_len);
    742       1.2        ad 				if (rv != 0)
    743       1.2        ad 					break;
    744       1.2        ad 				sz += bufs[i].db_frags[j].iov_len;
    745       1.2        ad 			}
    746       1.2        ad 		}
    747       1.1        ad 
    748       1.2        ad 		if (bufs[i].db_ptr != NULL)
    749       1.2        ad 			free(bufs[i].db_ptr, M_DEVBUF);
    750       1.2        ad 	}
    751       1.1        ad 
    752       1.1        ad 	return (rv);
    753       1.1        ad }
    754