adwlib.h revision 1.13
1 /* $NetBSD: adwlib.h,v 1.13 2000/05/27 18:24:50 dante Exp $ */ 2 3 /* 4 * Definitions for low level routines and data structures 5 * for the Advanced Systems Inc. SCSI controllers chips. 6 * 7 * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc. 8 * All rights reserved. 9 * 10 * Author: Baldassare Dante Profeta <dante (at) mclink.it> 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. All advertising materials mentioning features or use of this software 21 * must display the following acknowledgement: 22 * This product includes software developed by the NetBSD 23 * Foundation, Inc. and its contributors. 24 * 4. Neither the name of The NetBSD Foundation nor the names of its 25 * contributors may be used to endorse or promote products derived 26 * from this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 29 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 30 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 31 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 32 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 33 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 34 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 35 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 36 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 37 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGE. 39 */ 40 /* 41 * Ported from: 42 */ 43 /* 44 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters 45 * 46 * Copyright (c) 1995-2000 Advanced System Products, Inc. 47 * All Rights Reserved. 48 * 49 * Redistribution and use in source and binary forms, with or without 50 * modification, are permitted provided that redistributions of source 51 * code retain the above copyright notice and this comment without 52 * modification. 53 */ 54 55 #ifndef _ADVANSYS_WIDE_LIBRARY_H_ 56 #define _ADVANSYS_WIDE_LIBRARY_H_ 57 58 59 /* 60 * --- Adv Library Constants and Macros 61 */ 62 63 #define ADW_LIB_VERSION_MAJOR 5 64 #define ADW_LIB_VERSION_MINOR 8 65 66 67 /* If the result wraps when calculating tenths, return 0. */ 68 #define ADW_TENTHS(num, den) \ 69 (((10 * ((num)/(den))) > (((num) * 10)/(den))) ? \ 70 0 : ((((num) * 10)/(den)) - (10 * ((num)/(den))))) 71 72 73 /* 74 * Define Adv Reset Hold Time grater than 25 uSec. 75 * See AdwResetSCSIBus() for more info. 76 */ 77 #define ASC_SCSI_RESET_HOLD_TIME_US 60 78 79 /* 80 * Define Adv EEPROM constants. 81 */ 82 83 #define ASC_EEP_DVC_CFG_BEGIN (0x00) 84 #define ASC_EEP_DVC_CFG_END (0x15) 85 #define ASC_EEP_DVC_CTL_BEGIN (0x16) /* location of OEM name */ 86 #define ASC_EEP_MAX_WORD_ADDR (0x1E) 87 88 #define ASC_EEP_DELAY_MS 100 89 90 /* 91 * EEPROM bits reference by the RISC after initialization. 92 */ 93 #define ADW_EEPROM_BIG_ENDIAN 0x8000 /* EEPROM Bit 15 */ 94 #define ADW_EEPROM_BIOS_ENABLE 0x4000 /* EEPROM Bit 14 */ 95 #define ADW_EEPROM_TERM_POL 0x2000 /* EEPROM Bit 13 */ 96 97 /* 98 * EEPROM configuration format 99 * 100 * Field naming convention: 101 * 102 * *_enable indicates the field enables or disables the feature. The 103 * value is never reset. 104 * 105 * *_able indicates both whether a feature should be enabled or disabled 106 * and whether a device isi capable of the feature. At initialization 107 * this field may be set, but later if a device is found to be incapable 108 * of the feature, the field is cleared. 109 * 110 * Default values are maintained in the structure Default_EEPROM_Config. 111 */ 112 #define ADV_EEPROM_BIG_ENDIAN 0x8000 /* EEPROM Bit 15 */ 113 #define ADV_EEPROM_BIOS_ENABLE 0x4000 /* EEPROM Bit 14 */ 114 /* 115 * For the ASC3550 Bit 13 is Termination Polarity control bit. 116 * For later ICs Bit 13 controls whether the CIS (Card Information 117 * Service Section) is loaded from EEPROM. 118 */ 119 #define ADV_EEPROM_TERM_POL 0x2000 /* EEPROM Bit 13 */ 120 #define ADV_EEPROM_CIS_LD 0x2000 /* EEPROM Bit 13 */ 121 122 /* 123 * ASC38C1600 Bit 11 124 * 125 * If EEPROM Bit 11 is 0 for Function 0, then Function 0 will specify 126 * INT A in the PCI Configuration Space Int Pin field. If it is 1, then 127 * Function 0 will specify INT B. 128 * 129 * If EEPROM Bit 11 is 0 for Function 1, then Function 1 will specify 130 * INT B in the PCI Configuration Space Int Pin field. If it is 1, then 131 * Function 1 will specify INT A. 132 */ 133 #define ADW_EEPROM_INTAB 0x0800 /* EEPROM Bit 11 */ 134 135 typedef struct adw_eeprom 136 { 137 /* Word Offset, Description */ 138 139 u_int16_t cfg_lsw; /* 00 power up initialization */ 140 /* bit 13 set - Term Polarity Control */ 141 /* bit 14 set - BIOS Enable */ 142 /* bit 15 set - Big Endian Mode */ 143 u_int16_t cfg_msw; /* 01 unused */ 144 u_int16_t disc_enable; /* 02 disconnect enable */ 145 u_int16_t wdtr_able; /* 03 Wide DTR able */ 146 union { 147 u_int16_t sdtr_able; /* 04 Synchronous DTR able */ 148 u_int16_t sdtr_speed1; /* 04 SDTR Speed TID 0-3 */ 149 } sdtr1; 150 u_int16_t start_motor; /* 05 send start up motor */ 151 u_int16_t tagqng_able; /* 06 tag queuing able */ 152 u_int16_t bios_scan; /* 07 BIOS device control */ 153 u_int16_t scam_tolerant; /* 08 no scam */ 154 155 u_int8_t adapter_scsi_id; /* 09 Host Adapter ID */ 156 u_int8_t bios_boot_delay; /* power up wait */ 157 158 u_int8_t scsi_reset_delay; /* 10 reset delay */ 159 u_int8_t bios_id_lun; /* first boot device scsi id & lun */ 160 /* high nibble is lun */ 161 /* low nibble is scsi id */ 162 163 u_int8_t termination_se; /* 11 0 - automatic */ 164 /* 1 - low off / high off */ 165 /* 2 - low off / high on */ 166 /* 3 - low on / high on */ 167 /* There is no low on / high off */ 168 169 u_int8_t termination_lvd; /* 11 0 - automatic */ 170 /* 1 - low off / high off */ 171 /* 2 - low off / high on */ 172 /* 3 - low on / high on */ 173 /* There is no low on / high off */ 174 175 u_int16_t bios_ctrl; /* 12 BIOS control bits */ 176 /* bit 0 BIOS don't act as initiator. */ 177 /* bit 1 BIOS > 1 GB support */ 178 /* bit 2 BIOS > 2 Disk Support */ 179 /* bit 3 BIOS don't support removables */ 180 /* bit 4 BIOS support bootable CD */ 181 /* bit 5 BIOS scan enabled */ 182 /* bit 6 BIOS support multiple LUNs */ 183 /* bit 7 BIOS display of message */ 184 /* bit 8 SCAM disabled */ 185 /* bit 9 Reset SCSI bus during init. */ 186 /* bit 10 */ 187 /* bit 11 No verbose initialization. */ 188 /* bit 12 SCSI parity enabled */ 189 /* bit 13 */ 190 /* bit 14 */ 191 /* bit 15 */ 192 union { 193 u_int16_t ultra_able; /* 13 ULTRA speed able */ 194 u_int16_t sdtr_speed2; /* 13 SDTR speed TID 4-7 */ 195 } sdtr2; 196 union { 197 u_int16_t reserved2; /* 14 reserved */ 198 u_int16_t sdtr_speed3; /* 14 SDTR speed TID 8-11 */ 199 } sdtr3; 200 u_int8_t max_host_qng; /* 15 maximum host queuing */ 201 u_int8_t max_dvc_qng; /* maximum per device queuing */ 202 u_int16_t dvc_cntl; /* 16 control bit for driver */ 203 union { 204 u_int16_t bug_fix; /* 17 control bit for bug fix */ 205 u_int16_t sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */ 206 } sdtr4; 207 u_int16_t serial_number[3]; /* 18 - 20 Board serial number */ 208 u_int16_t check_sum; /* 21 EEP check sum */ 209 u_int8_t oem_name[16]; /* 22 OEM name */ 210 u_int16_t dvc_err_code; /* 30 last device driver error code */ 211 u_int16_t adv_err_code; /* 31 last uc and Adv Lib error code */ 212 u_int16_t adv_err_addr; /* 32 last uc error address */ 213 u_int16_t saved_dvc_err_code; /* 33 saved last dev. driver error code */ 214 u_int16_t saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ 215 u_int16_t saved_adv_err_addr; /* 35 saved last uc error address */ 216 u_int16_t reserved1[20]; /* 36 - 55 reserved */ 217 u_int16_t cisptr_lsw; /* 56 CIS PTR LSW */ 218 u_int16_t cisprt_msw; /* 57 CIS PTR MSW */ 219 u_int16_t subsysvid; /* 58 SubSystem Vendor ID */ 220 u_int16_t subsysid; /* 59 SubSystem ID */ 221 u_int16_t reserved2[4]; /* 60 - 63 reserved */ 222 } ADW_EEPROM; 223 224 225 /* 226 * EEPROM Commands 227 */ 228 #define ASC_EEP_CMD_READ 0x80 229 #define ASC_EEP_CMD_WRITE 0x40 230 #define ASC_EEP_CMD_WRITE_ABLE 0x30 231 #define ASC_EEP_CMD_WRITE_DISABLE 0x00 232 233 #define ASC_EEP_CMD_DONE 0x0200 234 #define ASC_EEP_CMD_DONE_ERR 0x0001 235 236 /* cfg_word */ 237 #define EEP_CFG_WORD_BIG_ENDIAN 0x8000 238 239 /* bios_ctrl */ 240 #define BIOS_CTRL_BIOS 0x0001 241 #define BIOS_CTRL_EXTENDED_XLAT 0x0002 242 #define BIOS_CTRL_GT_2_DISK 0x0004 243 #define BIOS_CTRL_BIOS_REMOVABLE 0x0008 244 #define BIOS_CTRL_BOOTABLE_CD 0x0010 245 #define BIOS_CTRL_MULTIPLE_LUN 0x0040 246 #define BIOS_CTRL_DISPLAY_MSG 0x0080 247 #define BIOS_CTRL_NO_SCAM 0x0100 248 #define BIOS_CTRL_RESET_SCSI_BUS 0x0200 249 #define BIOS_CTRL_INIT_VERBOSE 0x0800 250 #define BIOS_CTRL_SCSI_PARITY 0x1000 251 #define BIOS_CTRL_AIPP_DIS 0x2000 252 253 #define ADW_3550_MEMSIZE 0x2000 /* 8 KB Internal Memory */ 254 #define ADW_3550_IOLEN 0x40 /* I/O Port Range in bytes */ 255 256 #define ADW_38C0800_MEMSIZE 0x4000 /* 16 KB Internal Memory */ 257 #define ADW_38C0800_IOLEN 0x100 /* I/O Port Range in bytes */ 258 259 #define ADW_38C1600_MEMSIZE 0x8000 /* 32 KB Internal Memory */ 260 #define ADW_38C1600_IOLEN 0x100 /* I/O Port Range 256 bytes */ 261 #define ADW_38C1600_MEMLEN 0x1000 /* Memory Range 4KB bytes */ 262 263 /* 264 * Byte I/O register address from base of 'iop_base'. 265 */ 266 #define IOPB_INTR_STATUS_REG 0x00 267 #define IOPB_CHIP_ID_1 0x01 268 #define IOPB_INTR_ENABLES 0x02 269 #define IOPB_CHIP_TYPE_REV 0x03 270 #define IOPB_RES_ADDR_4 0x04 271 #define IOPB_RES_ADDR_5 0x05 272 #define IOPB_RAM_DATA 0x06 273 #define IOPB_RES_ADDR_7 0x07 274 #define IOPB_FLAG_REG 0x08 275 #define IOPB_RES_ADDR_9 0x09 276 #define IOPB_RISC_CSR 0x0A 277 #define IOPB_RES_ADDR_B 0x0B 278 #define IOPB_RES_ADDR_C 0x0C 279 #define IOPB_RES_ADDR_D 0x0D 280 #define IOPB_SOFT_OVER_WR 0x0E 281 #define IOPB_RES_ADDR_F 0x0F 282 #define IOPB_MEM_CFG 0x10 283 #define IOPB_RES_ADDR_11 0x11 284 #define IOPB_GPIO_DATA 0x12 285 #define IOPB_RES_ADDR_13 0x13 286 #define IOPB_FLASH_PAGE 0x14 287 #define IOPB_RES_ADDR_15 0x15 288 #define IOPB_GPIO_CNTL 0x16 289 #define IOPB_RES_ADDR_17 0x17 290 #define IOPB_FLASH_DATA 0x18 291 #define IOPB_RES_ADDR_19 0x19 292 #define IOPB_RES_ADDR_1A 0x1A 293 #define IOPB_RES_ADDR_1B 0x1B 294 #define IOPB_RES_ADDR_1C 0x1C 295 #define IOPB_RES_ADDR_1D 0x1D 296 #define IOPB_RES_ADDR_1E 0x1E 297 #define IOPB_RES_ADDR_1F 0x1F 298 #define IOPB_DMA_CFG0 0x20 299 #define IOPB_DMA_CFG1 0x21 300 #define IOPB_TICKLE 0x22 301 #define IOPB_DMA_REG_WR 0x23 302 #define IOPB_SDMA_STATUS 0x24 303 #define IOPB_SCSI_BYTE_CNT 0x25 304 #define IOPB_HOST_BYTE_CNT 0x26 305 #define IOPB_BYTE_LEFT_TO_XFER 0x27 306 #define IOPB_BYTE_TO_XFER_0 0x28 307 #define IOPB_BYTE_TO_XFER_1 0x29 308 #define IOPB_BYTE_TO_XFER_2 0x2A 309 #define IOPB_BYTE_TO_XFER_3 0x2B 310 #define IOPB_ACC_GRP 0x2C 311 #define IOPB_RES_ADDR_2D 0x2D 312 #define IOPB_DEV_ID 0x2E 313 #define IOPB_RES_ADDR_2F 0x2F 314 #define IOPB_SCSI_DATA 0x30 315 #define IOPB_RES_ADDR_31 0x31 316 #define IOPB_RES_ADDR_32 0x32 317 #define IOPB_SCSI_DATA_HSHK 0x33 318 #define IOPB_SCSI_CTRL 0x34 319 #define IOPB_RES_ADDR_35 0x35 320 #define IOPB_RES_ADDR_36 0x36 321 #define IOPB_RES_ADDR_37 0x37 322 #define IOPB_RAM_BIST 0x38 323 #define IOPB_PLL_TEST 0x39 324 #define IOPB_PCI_INT_CFG 0x3A 325 #define IOPB_RES_ADDR_3B 0x3B 326 #define IOPB_RFIFO_CNT 0x3C 327 #define IOPB_RES_ADDR_3D 0x3D 328 #define IOPB_RES_ADDR_3E 0x3E 329 #define IOPB_RES_ADDR_3F 0x3F 330 331 /* 332 * Word I/O register address from base of 'iop_base'. 333 */ 334 #define IOPW_CHIP_ID_0 0x00 /* CID0 */ 335 #define IOPW_CTRL_REG 0x02 /* CC */ 336 #define IOPW_RAM_ADDR 0x04 /* LA */ 337 #define IOPW_RAM_DATA 0x06 /* LD */ 338 #define IOPW_RES_ADDR_08 0x08 339 #define IOPW_RISC_CSR 0x0A /* CSR */ 340 #define IOPW_SCSI_CFG0 0x0C /* CFG0 */ 341 #define IOPW_SCSI_CFG1 0x0E /* CFG1 */ 342 #define IOPW_RES_ADDR_10 0x10 343 #define IOPW_SEL_MASK 0x12 /* SM */ 344 #define IOPW_RES_ADDR_14 0x14 345 #define IOPW_FLASH_ADDR 0x16 /* FA */ 346 #define IOPW_RES_ADDR_18 0x18 347 #define IOPW_EE_CMD 0x1A /* EC */ 348 #define IOPW_EE_DATA 0x1C /* ED */ 349 #define IOPW_SFIFO_CNT 0x1E /* SFC */ 350 #define IOPW_RES_ADDR_20 0x20 351 #define IOPW_Q_BASE 0x22 /* QB */ 352 #define IOPW_QP 0x24 /* QP */ 353 #define IOPW_IX 0x26 /* IX */ 354 #define IOPW_SP 0x28 /* SP */ 355 #define IOPW_PC 0x2A /* PC */ 356 #define IOPW_RES_ADDR_2C 0x2C 357 #define IOPW_RES_ADDR_2E 0x2E 358 #define IOPW_SCSI_DATA 0x30 /* SD */ 359 #define IOPW_SCSI_DATA_HSHK 0x32 /* SDH */ 360 #define IOPW_SCSI_CTRL 0x34 /* SC */ 361 #define IOPW_HSHK_CFG 0x36 /* HCFG */ 362 #define IOPW_SXFR_STATUS 0x36 /* SXS */ 363 #define IOPW_SXFR_CNTL 0x38 /* SXL */ 364 #define IOPW_SXFR_CNTH 0x3A /* SXH */ 365 #define IOPW_RES_ADDR_3C 0x3C 366 #define IOPW_RFIFO_DATA 0x3E /* RFD */ 367 368 /* 369 * Doubleword I/O register address from base of 'iop_base'. 370 */ 371 #define IOPDW_RES_ADDR_0 0x00 372 #define IOPDW_RAM_DATA 0x04 373 #define IOPDW_RES_ADDR_8 0x08 374 #define IOPDW_RES_ADDR_C 0x0C 375 #define IOPDW_RES_ADDR_10 0x10 376 #define IOPDW_COMMA 0x14 377 #define IOPDW_COMMB 0x18 378 #define IOPDW_RES_ADDR_1C 0x1C 379 #define IOPDW_SDMA_ADDR0 0x20 380 #define IOPDW_SDMA_ADDR1 0x24 381 #define IOPDW_SDMA_COUNT 0x28 382 #define IOPDW_SDMA_ERROR 0x2C 383 #define IOPDW_RDMA_ADDR0 0x30 384 #define IOPDW_RDMA_ADDR1 0x34 385 #define IOPDW_RDMA_COUNT 0x38 386 #define IOPDW_RDMA_ERROR 0x3C 387 388 #define ADW_CHIP_ID_BYTE 0x25 389 #define ADW_CHIP_ID_WORD 0x04C1 390 391 #define ADW_SC_SCSI_BUS_RESET 0x2000 392 393 #define ADW_INTR_ENABLE_HOST_INTR 0x01 394 #define ADW_INTR_ENABLE_SEL_INTR 0x02 395 #define ADW_INTR_ENABLE_DPR_INTR 0x04 396 #define ADW_INTR_ENABLE_RTA_INTR 0x08 397 #define ADW_INTR_ENABLE_RMA_INTR 0x10 398 #define ADW_INTR_ENABLE_RST_INTR 0x20 399 #define ADW_INTR_ENABLE_DPE_INTR 0x40 400 #define ADW_INTR_ENABLE_GLOBAL_INTR 0x80 401 402 #define ADW_INTR_STATUS_INTRA 0x01 403 #define ADW_INTR_STATUS_INTRB 0x02 404 #define ADW_INTR_STATUS_INTRC 0x04 405 406 #define ADW_RISC_CSR_STOP (0x0000) 407 #define ADW_RISC_TEST_COND (0x2000) 408 #define ADW_RISC_CSR_RUN (0x4000) 409 #define ADW_RISC_CSR_SINGLE_STEP (0x8000) 410 411 #define ADW_CTRL_REG_HOST_INTR 0x0100 412 #define ADW_CTRL_REG_SEL_INTR 0x0200 413 #define ADW_CTRL_REG_DPR_INTR 0x0400 414 #define ADW_CTRL_REG_RTA_INTR 0x0800 415 #define ADW_CTRL_REG_RMA_INTR 0x1000 416 #define ADW_CTRL_REG_RES_BIT14 0x2000 417 #define ADW_CTRL_REG_DPE_INTR 0x4000 418 #define ADW_CTRL_REG_POWER_DONE 0x8000 419 #define ADW_CTRL_REG_ANY_INTR 0xFF00 420 421 #define ADW_CTRL_REG_CMD_RESET 0x00C6 422 #define ADW_CTRL_REG_CMD_WR_IO_REG 0x00C5 423 #define ADW_CTRL_REG_CMD_RD_IO_REG 0x00C4 424 #define ADW_CTRL_REG_CMD_WR_PCI_CFG_SPACE 0x00C3 425 #define ADW_CTRL_REG_CMD_RD_PCI_CFG_SPACE 0x00C2 426 427 #define ADV_TICKLE_NOP 0x00 428 #define ADV_TICKLE_A 0x01 429 #define ADV_TICKLE_B 0x02 430 #define ADV_TICKLE_C 0x03 431 432 #define ADW_SCSI_CTRL_RSTOUT 0x2000 433 434 #define ADW_IS_INT_PENDING(iot, ioh) \ 435 (ADW_READ_WORD_REGISTER((iot), (ioh), IOPW_CTRL_REG) & ADW_CTRL_REG_HOST_INTR) 436 437 /* 438 * SCSI_CFG0 Register bit definitions 439 */ 440 #define ADW_TIMER_MODEAB 0xC000 /* Watchdog, Second, and Select. Timer Ctrl. */ 441 #define ADW_PARITY_EN 0x2000 /* Enable SCSI Parity Error detection */ 442 #define ADW_EVEN_PARITY 0x1000 /* Select Even Parity */ 443 #define ADW_WD_LONG 0x0800 /* Watchdog Interval, 1: 57 min, 0: 13 sec */ 444 #define ADW_QUEUE_128 0x0400 /* Queue Size, 1: 128 byte, 0: 64 byte */ 445 #define ADW_PRIM_MODE 0x0100 /* Primitive SCSI mode */ 446 #define ADW_SCAM_EN 0x0080 /* Enable SCAM selection */ 447 #define ADW_SEL_TMO_LONG 0x0040 /* Sel/Resel Timeout, 1: 400 ms, 0: 1.6 ms */ 448 #define ADW_CFRM_ID 0x0020 /* SCAM id sel. confirm., 1: fast, 0: 6.4 ms */ 449 #define ADW_OUR_ID_EN 0x0010 /* Enable OUR_ID bits */ 450 #define ADW_OUR_ID 0x000F /* SCSI ID */ 451 452 /* 453 * SCSI_CFG1 Register bit definitions 454 */ 455 #define ADW_BIG_ENDIAN 0x8000 /* Enable Big Endian Mode MIO:15, EEP:15 */ 456 #define ADW_TERM_POL 0x2000 /* Terminator Polarity Ctrl. MIO:13, EEP:13 */ 457 #define ADW_SLEW_RATE 0x1000 /* SCSI output buffer slew rate */ 458 #define ADW_FILTER_SEL 0x0C00 /* Filter Period Selection */ 459 #define ADW_FLTR_DISABLE 0x0000 /* Input Filtering Disabled */ 460 #define ADW_FLTR_11_TO_20NS 0x0800 /* Input Filtering 11ns to 20ns */ 461 #define ADW_FLTR_21_TO_39NS 0x0C00 /* Input Filtering 21ns to 39ns */ 462 #define ADW_ACTIVE_DBL 0x0200 /* Disable Active Negation */ 463 #define ADW_DIFF_MODE 0x0100 /* SCSI differential Mode (Read-Only) */ 464 #define ADW_DIFF_SENSE 0x0080 /* 1: No SE cables, 0: SE cable (Read-Only) */ 465 #define ADW_TERM_CTL_SEL 0x0040 /* Enable TERM_CTL_H and TERM_CTL_L */ 466 #define ADW_TERM_CTL 0x0030 /* External SCSI Termination Bits */ 467 #define ADW_TERM_CTL_H 0x0020 /* Enable External SCSI Upper Termination */ 468 #define ADW_TERM_CTL_L 0x0010 /* Enable External SCSI Lower Termination */ 469 #define ADW_CABLE_DETECT 0x000F /* External SCSI Cable Connection Status */ 470 471 /* 472 * Addendum for ASC-38C0800 Chip 473 * 474 * The ASC-38C1600 Chip uses the same definitions except that the 475 * bus mode override bits [12:10] have been moved to byte register 476 * offset 0xE (IOPB_SOFT_OVER_WR) bits [12:10]. The [12:10] bits in 477 * SCSI_CFG1 are read-only and always available. Bit 14 (DIS_TERM_DRV) 478 * is not needed. The [12:10] bits in IOPB_SOFT_OVER_WR are write-only. 479 * Also each ASC-38C1600 function or channel uses only cable bits [5:4] 480 * and [1:0]. Bits [14], [7:6], [3:2] are unused. 481 */ 482 #define ADW_DIS_TERM_DRV 0x4000 /* 1: Read c_det[3:0], 0: cannot read */ 483 #define ADW_HVD_LVD_SE 0x1C00 /* Device Detect Bits */ 484 #define ADW_HVD 0x1000 /* HVD Device Detect */ 485 #define ADW_LVD 0x0800 /* LVD Device Detect */ 486 #define ADW_SE 0x0400 /* SE Device Detect */ 487 #define ADW_TERM_LVD 0x00C0 /* LVD Termination Bits */ 488 #define ADW_TERM_LVD_HI 0x0080 /* Enable LVD Upper Termination */ 489 #define ADW_TERM_LVD_LO 0x0040 /* Enable LVD Lower Termination */ 490 #define ADW_TERM_SE 0x0030 /* SE Termination Bits */ 491 #define ADW_TERM_SE_HI 0x0020 /* Enable SE Upper Termination */ 492 #define ADW_TERM_SE_LO 0x0010 /* Enable SE Lower Termination */ 493 #define ADW_C_DET_LVD 0x000C /* LVD Cable Detect Bits */ 494 #define ADW_C_DET3 0x0008 /* Cable Detect for LVD External Wide */ 495 #define ADW_C_DET2 0x0004 /* Cable Detect for LVD Internal Wide */ 496 #define ADW_C_DET_SE 0x0003 /* SE Cable Detect Bits */ 497 #define ADW_C_DET1 0x0002 /* Cable Detect for SE Internal Wide */ 498 #define ADW_C_DET0 0x0001 /* Cable Detect for SE Internal Narrow */ 499 500 501 #define CABLE_ILLEGAL_A 0x7 502 /* x 0 0 0 | on on | Illegal (all 3 connectors are used) */ 503 504 #define CABLE_ILLEGAL_B 0xB 505 /* 0 x 0 0 | on on | Illegal (all 3 connectors are used) */ 506 507 /* 508 The following table details the SCSI_CFG1 Termination Polarity, 509 Termination Control and Cable Detect bits. 510 511 Cable Detect | Termination 512 Bit 3 2 1 0 | 5 4 | Notes 513 _____________|________|____________________ 514 1 1 1 0 | on on | Internal wide only 515 1 1 0 1 | on on | Internal narrow only 516 1 0 1 1 | on on | External narrow only 517 0 x 1 1 | on on | External wide only 518 1 1 0 0 | on off| Internal wide and internal narrow 519 1 0 1 0 | on off| Internal wide and external narrow 520 0 x 1 0 | off off| Internal wide and external wide 521 1 0 0 1 | on off| Internal narrow and external narrow 522 0 x 0 1 | on off| Internal narrow and external wide 523 1 1 1 1 | on on | No devices are attached 524 x 0 0 0 | on on | Illegal (all 3 connectors are used) 525 0 x 0 0 | on on | Illegal (all 3 connectors are used) 526 527 x means don't-care (either '0' or '1') 528 529 If term_pol (bit 13) is '0' (active-low terminator enable), then: 530 'on' is '0' and 'off' is '1'. 531 532 If term_pol bit is '1' (meaning active-hi terminator enable), then: 533 'on' is '1' and 'off' is '0'. 534 */ 535 536 /* 537 * MEM_CFG Register bit definitions 538 */ 539 #define ADW_BIOS_EN 0x40 /* BIOS Enable MIO:14,EEP:14 */ 540 #define ADW_FAST_EE_CLK 0x20 /* Diagnostic Bit */ 541 #define ADW_RAM_SZ 0x1C /* Specify size of RAM to RISC */ 542 #define ADW_RAM_SZ_2KB 0x00 /* 2 KB */ 543 #define ADW_RAM_SZ_4KB 0x04 /* 4 KB */ 544 #define ADW_RAM_SZ_8KB 0x08 /* 8 KB */ 545 #define ADW_RAM_SZ_16KB 0x0C /* 16 KB */ 546 #define ADW_RAM_SZ_32KB 0x10 /* 32 KB */ 547 #define ADW_RAM_SZ_64KB 0x14 /* 64 KB */ 548 549 /* 550 * DMA_CFG0 Register bit definitions 551 * 552 * This register is only accessible to the host. 553 */ 554 #define BC_THRESH_ENB 0x80 /* PCI DMA Start Conditions */ 555 #define FIFO_THRESH 0x70 /* PCI DMA FIFO Threshold */ 556 #define FIFO_THRESH_16B 0x00 /* 16 bytes */ 557 #define FIFO_THRESH_32B 0x20 /* 32 bytes */ 558 #define FIFO_THRESH_48B 0x30 /* 48 bytes */ 559 #define FIFO_THRESH_64B 0x40 /* 64 bytes */ 560 #define FIFO_THRESH_80B 0x50 /* 80 bytes (default) */ 561 #define FIFO_THRESH_96B 0x60 /* 96 bytes */ 562 #define FIFO_THRESH_112B 0x70 /* 112 bytes */ 563 #define START_CTL 0x0C /* DMA start conditions */ 564 #define START_CTL_TH 0x00 /* Wait threshold level (default) */ 565 #define START_CTL_ID 0x04 /* Wait SDMA/SBUS idle */ 566 #define START_CTL_THID 0x08 /* Wait threshold and SDMA/SBUS idle */ 567 #define START_CTL_EMFU 0x0C /* Wait SDMA FIFO empty/full */ 568 #define READ_CMD 0x03 /* Memory Read Method */ 569 #define READ_CMD_MR 0x00 /* Memory Read */ 570 #define READ_CMD_MRL 0x02 /* Memory Read Long */ 571 #define READ_CMD_MRM 0x03 /* Memory Read Multiple (default) */ 572 573 /* 574 * ASC-38C0800 RAM BIST Register bit definitions 575 */ 576 #define RAM_TEST_MODE 0x80 577 #define PRE_TEST_MODE 0x40 578 #define NORMAL_MODE 0x00 579 #define RAM_TEST_DONE 0x10 580 #define RAM_TEST_STATUS 0x0F 581 #define RAM_TEST_HOST_ERROR 0x08 582 #define RAM_TEST_INTRAM_ERROR 0x04 583 #define RAM_TEST_RISC_ERROR 0x02 584 #define RAM_TEST_SCSI_ERROR 0x01 585 #define RAM_TEST_SUCCESS 0x00 586 #define PRE_TEST_VALUE 0x05 587 #define NORMAL_VALUE 0x00 588 589 /* 590 * ASC38C1600 Definitions 591 * 592 * IOPB_PCI_INT_CFG Bit Field Definitions 593 */ 594 595 #define INTAB_LD 0x80 /* Value loaded from EEPROM Bit 11. */ 596 597 /* 598 * Bit 1 can be set to change the interrupt for the Function to operate in 599 * Totem Pole mode. By default Bit 1 is 0 and the interrupt operates in 600 * Open Drain mode. Both functions of the ASC38C1600 must be set to the same 601 * mode, otherwise the operating mode is undefined. 602 */ 603 #define TOTEMPOLE 0x02 604 605 /* 606 * Bit 0 can be used to change the Int Pin for the Function. The value is 607 * 0 by default for both Functions with Function 0 using INT A and Function 608 * B using INT B. For Function 0 if set, INT B is used. For Function 1 if set, 609 * INT A is used. 610 * 611 * EEPROM Word 0 Bit 11 for each Function may change the initial Int Pin 612 * value specified in the PCI Configuration Space. 613 */ 614 #define INTAB 0x01 615 616 617 #define ADW_MAX_TID 15 /* max. target identifier */ 618 #define ADW_MAX_LUN 7 /* max. logical unit number */ 619 620 621 /* 622 * Adv Library Status Definitions 623 */ 624 #define ADW_TRUE 1 625 #define ADW_FALSE 0 626 #define ADW_NOERROR 1 627 #define ADW_SUCCESS 1 628 #define ADW_BUSY 0 629 #define ADW_ERROR (-1) 630 631 632 /* 633 * Warning code values for AdwInitFrom*EEP() functions 634 */ 635 #define ADW_WARN_BUSRESET_ERROR 0x0001 /* SCSI Bus Reset error */ 636 #define ADW_WARN_EEPROM_CHKSUM 0x0002 /* EEP check sum error */ 637 #define ADW_WARN_EEPROM_TERMINATION 0x0004 /* EEP termination bad field */ 638 #define ADW_WARN_SET_PCI_CONFIG_SPACE 0x0080 /* PCI config space set error */ 639 #define ADW_WARN_ERROR 0xFFFF /* ADW_ERROR return */ 640 641 /* 642 * Error code values for AdwInitAsc*Driver() functions 643 */ 644 #define ADW_IERR_WRITE_EEPROM 0x0001 /* write EEPROM error */ 645 #define ADW_IERR_MCODE_CHKSUM 0x0002 /* micro code check sum error */ 646 #define ADW_IERR_NO_CARRIER 0x0004 /* No more carrier memory. */ 647 #define ADW_IERR_START_STOP_CHIP 0x0008 /* start/stop chip failed */ 648 #define ADW_IERR_CHIP_VERSION 0x0040 /* wrong chip version */ 649 #define ADW_IERR_SET_SCSI_ID 0x0080 /* set SCSI ID failed */ 650 #define ADW_IERR_HVD_DEVICE 0x0100 /* HVD attached to LVD connector. */ 651 #define ADW_IERR_BAD_SIGNATURE 0x0200 /* signature not found */ 652 #define ADW_IERR_ILLEGAL_CONNECTION 0x0400 /* Illegal cable connection */ 653 #define ADW_IERR_SINGLE_END_DEVICE 0x0800 /* Single-end used w/differential */ 654 #define ADW_IERR_REVERSED_CABLE 0x1000 /* Narrow flat cable reversed */ 655 #define ADW_IERR_BIST_PRE_TEST 0x2000 /* BIST pre-test error */ 656 #define ADW_IERR_BIST_RAM_TEST 0x4000 /* BIST RAM test error */ 657 #define ADW_IERR_BAD_CHIPTYPE 0x8000 /* Invalid 'chip_type' setting. */ 658 659 /* 660 * BIOS LRAM variable absolute offsets. 661 */ 662 #define BIOS_CODESEG 0x54 663 #define BIOS_CODELEN 0x56 664 #define BIOS_SIGNATURE 0x58 665 #define BIOS_VERSION 0x5A 666 667 /* 668 * Chip Type flag values 669 */ 670 #define ADW_CHIP_ASC3550 0x01 /* Ultra-Wide IC */ 671 #define ADW_CHIP_ASC38C0800 0x02 /* Ultra2-Wide/LVD IC */ 672 #define ADW_CHIP_ASC38C1600 0x03 /* Ultra3-Wide/LVD2 IC */ 673 674 /* 675 * Adapter temporary configuration structure 676 * 677 * This structure can be discarded after initialization. Don't add 678 * fields here needed after initialization. 679 * 680 * Field naming convention: 681 * 682 * *_enable indicates the field enables or disables a feature. The 683 * value of the field is never reset. 684 */ 685 typedef struct adw_dvc_cfg { 686 u_int16_t disc_enable; /* enable disconnection */ 687 u_int8_t chip_version; /* chip version */ 688 u_int8_t termination; /* Term. Ctrl. bits 6-5 of SCSI_CFG1 */ 689 u_int16_t pci_device_id; /* PCI device code number */ 690 u_int16_t lib_version; /* Adv Library version number */ 691 u_int16_t control_flag; /* Microcode Control Flag */ 692 u_int16_t mcode_date; /* Microcode date */ 693 u_int16_t mcode_version; /* Microcode version */ 694 u_int16_t pci_slot_info; /* high byte device/function number 695 bits 7-3 device num., 696 bits 2-0 function num. 697 low byte bus num. */ 698 u_int16_t serial1; /* EEPROM serial number word 1 */ 699 u_int16_t serial2; /* EEPROM serial number word 2 */ 700 u_int16_t serial3; /* EEPROM serial number word 3 */ 701 } ADW_DVC_CFG; 702 703 704 #define NO_OF_SG_PER_BLOCK 15 705 706 typedef struct adw_sg_block { 707 u_int8_t reserved1; 708 u_int8_t reserved2; 709 u_int8_t reserved3; 710 u_int8_t sg_cnt; /* Valid entries in block. */ 711 u_int32_t sg_ptr; /* links to next sg block */ 712 struct { 713 u_int32_t sg_addr; /* SG element address */ 714 u_int32_t sg_count; /* SG element count */ 715 } sg_list[NO_OF_SG_PER_BLOCK]; 716 } ADW_SG_BLOCK; 717 718 719 /* 720 * Adapter operation variable structure. 721 * 722 * One structure is required per host adapter. 723 * 724 * Field naming convention: 725 * 726 * *_able indicates both whether a feature should be enabled or disabled 727 * and whether a device is capable of the feature. At initialization 728 * this field may be set, but later if a device is found to be incapable 729 * of the feature, the field is cleared. 730 */ 731 #define CCB_HASH_SIZE 32 /* hash table size for phystokv */ 732 #define CCB_HASH_SHIFT 9 733 #define CCB_HASH(x) ((((x)) >> CCB_HASH_SHIFT) & (CCB_HASH_SIZE - 1)) 734 735 typedef int (* ADW_CALLBACK) (int); 736 737 typedef struct adw_softc { 738 739 struct device sc_dev; 740 741 bus_space_tag_t sc_iot; 742 bus_space_handle_t sc_ioh; 743 bus_dma_tag_t sc_dmat; 744 bus_dmamap_t sc_dmamap_control; /* maps the control structures */ 745 bus_dmamap_t sc_dmamap_carrier; /* maps the carrier structures */ 746 void *sc_ih; 747 748 struct adw_control *sc_control; /* control structures */ 749 750 struct adw_ccb *sc_ccbhash[CCB_HASH_SIZE]; 751 TAILQ_HEAD(, adw_ccb) sc_free_ccb, sc_waiting_ccb; 752 TAILQ_HEAD(adw_pending_ccb, adw_ccb) sc_pending_ccb; 753 struct scsipi_link sc_link; /* prototype for devs */ 754 struct scsipi_adapter sc_adapter; 755 756 TAILQ_HEAD(, scsipi_xfer) sc_queue; 757 758 int sc_freeze_dev[ADW_MAX_TID]; 759 760 ADW_CALLBACK isr_callback; /* pointer to function, called in AdwISR() */ 761 ADW_CALLBACK async_callback; /* pointer to function, called in AdwISR() */ 762 u_int16_t bios_ctrl; /* BIOS control word, EEPROM word 12 */ 763 u_int16_t wdtr_able; /* try WDTR for a device */ 764 u_int16_t sdtr_able; /* try SDTR for a device */ 765 u_int16_t ultra_able; /* try SDTR Ultra speed for a device */ 766 u_int16_t sdtr_speed1; /* EEPROM SDTR Speed for TID 0-3 */ 767 u_int16_t sdtr_speed2; /* EEPROM SDTR Speed for TID 4-7 */ 768 u_int16_t sdtr_speed3; /* EEPROM SDTR Speed for TID 8-11 */ 769 u_int16_t sdtr_speed4; /* EEPROM SDTR Speed for TID 12-15 */ 770 u_int16_t tagqng_able; /* try tagged queuing with a device */ 771 u_int16_t ppr_able; /* PPR message capable per TID bitmask. */ 772 u_int16_t start_motor; /* start motor command allowed */ 773 u_int8_t max_dvc_qng; /* maximum number of tagged commands per device */ 774 u_int8_t scsi_reset_wait; /* delay in seconds after scsi bus reset */ 775 u_int8_t chip_no; /* should be assigned by caller */ 776 u_int8_t max_host_qng; /* maximum number of Q'ed command allowed */ 777 u_int8_t irq_no; /* IRQ number */ 778 u_int8_t chip_type; /* chip SCSI target ID */ 779 u_int16_t no_scam; /* scam_tolerant of EEPROM */ 780 u_int32_t drv_ptr; /* driver pointer to private structure */ 781 u_int8_t chip_scsi_id; /* chip SCSI target ID */ 782 u_int8_t bist_err_code; 783 u_int16_t carr_pending_cnt; /* Count of pending carriers. */ 784 struct adw_carrier *carr_freelist; /* Carrier free list. */ 785 struct adw_carrier *icq_sp; /* Initiator command queue stopper pointer. */ 786 struct adw_carrier *irq_sp; /* Initiator response queue stopper pointer. */ 787 /* 788 * Note: The following fields will not be used after initialization. The 789 * driver may discard the buffer after initialization is done. 790 */ 791 ADW_DVC_CFG cfg; /* temporary configuration structure */ 792 } ADW_SOFTC; 793 794 795 /* 796 * ADW_SCSI_REQ_Q - microcode request structure 797 * 798 * All fields in this structure up to byte 60 are used by the microcode. 799 * The microcode makes assumptions about the size and ordering of fields 800 * in this structure. Do not change the structure definition here without 801 * coordinating the change with the microcode. 802 */ 803 typedef struct adw_scsi_req_q { 804 u_int8_t cntl; /* Ucode flags and state (ADW_MC_QC_*). */ 805 u_int8_t target_cmd; 806 u_int8_t target_id; /* Device target identifier. */ 807 u_int8_t target_lun; /* Device target logical unit number. */ 808 u_int32_t data_addr; /* Data buffer physical address. */ 809 u_int32_t data_cnt; /* Data count. Ucode sets to residual. */ 810 u_int32_t sense_addr; /* Sense buffer physical address. */ 811 u_int32_t carr_ba; /* Carrier p-address */ 812 u_int8_t mflag; /* Adv Library flag field. */ 813 u_int8_t sense_len; /* Auto-sense length. uCode sets to residual. */ 814 u_int8_t cdb_len; /* SCSI CDB length. Must <= 16 bytes. */ 815 u_int8_t scsi_cntl; 816 u_int8_t done_status; /* Completion status. (see below) */ 817 u_int8_t scsi_status; /* SCSI status byte. (see below) */ 818 u_int8_t host_status; /* ,uCode host status. (see below) */ 819 u_int8_t sg_working_ix; /* ,uCode working SG variable. */ 820 u_int8_t cdb[12]; /* SCSI CDB bytes 0-11. */ 821 u_int32_t sg_real_addr; /* SG list physical address. */ 822 u_int32_t scsiq_rptr; /* Iternal pointer to ADW_SCSI_REQ_Q */ 823 u_int8_t cdb16[4]; /* SCSI CDB bytes 12-15. */ 824 u_int32_t ccb_ptr; /* CCB Physical Address */ 825 u_int32_t carr_va; /* Carrier v-address (unused) */ 826 /* 827 * End of microcode structure - 60 bytes. The rest of the structure 828 * is used by the Adv Library and ignored by the microcode. 829 */ 830 struct scsipi_sense_data *vsense_addr; /* Sense buffer virtual address. */ 831 u_char *vdata_addr; /* Data buffer virtual address. */ 832 } ADW_SCSI_REQ_Q; 833 834 /* 835 * ASC_SCSI_REQ_Q 'done_status' return values. 836 */ 837 #define QD_NO_STATUS 0x00 /* Request not completed yet. */ 838 #define QD_NO_ERROR 0x01 839 #define QD_ABORTED_BY_HOST 0x02 840 #define QD_WITH_ERROR 0x04 841 842 /* 843 * ASC_SCSI_REQ_Q 'host_status' return values. 844 */ 845 #define QHSTA_NO_ERROR 0x00 846 #define QHSTA_M_SEL_TIMEOUT 0x11 847 #define QHSTA_M_DATA_OVER_RUN 0x12 848 #define QHSTA_M_UNEXPECTED_BUS_FREE 0x13 849 #define QHSTA_M_QUEUE_ABORTED 0x15 850 #define QHSTA_M_SXFR_SDMA_ERR 0x16 /* SXFR_STATUS SCSI DMA Error */ 851 #define QHSTA_M_SXFR_SXFR_PERR 0x17 /* SXFR_STATUS SCSI Bus Parity Error */ 852 #define QHSTA_M_RDMA_PERR 0x18 /* RISC PCI DMA parity error */ 853 #define QHSTA_M_SXFR_OFF_UFLW 0x19 /* SXFR_STATUS Offset Underflow */ 854 #define QHSTA_M_SXFR_OFF_OFLW 0x20 /* SXFR_STATUS Offset Overflow */ 855 #define QHSTA_M_SXFR_WD_TMO 0x21 /* SXFR_STATUS Watchdog Timeout */ 856 #define QHSTA_M_SXFR_DESELECTED 0x22 /* SXFR_STATUS Deselected */ 857 /* Note: QHSTA_M_SXFR_XFR_OFLW is identical to QHSTA_M_DATA_OVER_RUN. */ 858 #define QHSTA_M_SXFR_XFR_OFLW 0x12 /* SXFR_STATUS Transfer Overflow */ 859 #define QHSTA_M_SXFR_XFR_PH_ERR 0x24 /* SXFR_STATUS Transfer Phase Error */ 860 #define QHSTA_M_SXFR_UNKNOWN_ERROR 0x25 /* SXFR_STATUS Unknown Error */ 861 #define QHSTA_M_SCSI_BUS_RESET 0x30 /* Request aborted from SBR */ 862 #define QHSTA_M_SCSI_BUS_RESET_UNSOL 0x31 /* Request aborted from unsol. SBR */ 863 #define QHSTA_M_BUS_DEVICE_RESET 0x32 /* Request aborted from BDR */ 864 #define QHSTA_M_DIRECTION_ERR 0x35 /* Data Phase mismatch */ 865 #define QHSTA_M_DIRECTION_ERR_HUNG 0x36 /* Data Phase mismatch and bus hang */ 866 #define QHSTA_M_WTM_TIMEOUT 0x41 867 #define QHSTA_M_BAD_CMPL_STATUS_IN 0x42 868 #define QHSTA_M_NO_AUTO_REQ_SENSE 0x43 869 #define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44 870 #define QHSTA_M_INVALID_DEVICE 0x45 /* Bad target ID */ 871 #define QHSTA_M_FROZEN_TIDQ 0x46 /* TID Queue frozen. */ 872 #define QHSTA_M_SGBACKUP_ERROR 0x47 /* Scatter-Gather backup error */ 873 874 /* 875 * ASC_SCSI_REQ_Q 'scsi_status' return values. 876 */ 877 #define SCSI_STATUS_GOOD 0x00 878 #define SCSI_STATUS_CHECK_CONDITION 0x02 879 #define SCSI_STATUS_CONDITION_MET 0x04 880 #define SCSI_STATUS_TARGET_BUSY 0x08 881 #define SCSI_STATUS_INTERMID 0x10 882 #define SCSI_STATUS_INTERMID_COND_MET 0x14 883 #define SCSI_STATUS_RSERV_CONFLICT 0x18 884 #define SCSI_STATUS_CMD_TERMINATED 0x22 885 #define SCSI_STATUS_QUEUE_FULL 0x28 886 887 888 /* 889 * Microcode idle loop commands 890 */ 891 #define IDLE_CMD_COMPLETED 0 892 #define IDLE_CMD_STOP_CHIP 0x0001 893 #define IDLE_CMD_STOP_CHIP_SEND_INT 0x0002 894 #define IDLE_CMD_SEND_INT 0x0004 895 #define IDLE_CMD_ABORT 0x0008 896 #define IDLE_CMD_DEVICE_RESET 0x0010 897 #define IDLE_CMD_SCSI_RESET_START 0x0020 /* Assert SCSI Bus Reset */ 898 #define IDLE_CMD_SCSI_RESET_END 0x0040 /* Deassert SCSI Bus Reset */ 899 #define IDLE_CMD_SCSIREQ 0x0080 900 901 #define IDLE_CMD_STATUS_SUCCESS 0x0001 902 #define IDLE_CMD_STATUS_FAILURE 0x0002 903 904 /* 905 * AdwSendIdleCmd() flag definitions. 906 */ 907 #define ADW_NOWAIT 0x01 908 909 /* 910 * Wait loop time out values. 911 */ 912 #define SCSI_WAIT_10_SEC 10UL /* 10 seconds */ 913 #define SCSI_WAIT_100_MSEC 100UL /* 100 milliseconds */ 914 #define SCSI_US_PER_MSEC 1000 /* microseconds per millisecond */ 915 #define SCSI_MS_PER_SEC 1000UL /* milliseconds per second */ 916 #define SCSI_MAX_RETRY 10 /* retry count */ 917 918 #define ADV_ASYNC_RDMA_FAILURE 0x01 /* Fatal RDMA failure. */ 919 #define ADV_ASYNC_SCSI_BUS_RESET_DET 0x02 /* Detected SCSI Bus Reset. */ 920 #define ADV_ASYNC_CARRIER_READY_FAILURE 0x03 /* Carrier Ready failure. */ 921 922 #define ADV_HOST_SCSI_BUS_RESET 0x80 /* Host Initiated SCSI Bus Reset. */ 923 924 925 /* Read byte from a register. */ 926 #define ADW_READ_BYTE_REGISTER(iot, ioh, reg_off) \ 927 bus_space_read_1((iot), (ioh), (reg_off)) 928 929 /* Write byte to a register. */ 930 #define ADW_WRITE_BYTE_REGISTER(iot, ioh, reg_off, byte) \ 931 bus_space_write_1((iot), (ioh), (reg_off), (byte)) 932 933 /* Read word (2 bytes) from a register. */ 934 #define ADW_READ_WORD_REGISTER(iot, ioh, reg_off) \ 935 bus_space_read_2((iot), (ioh), (reg_off)) 936 937 /* Write word (2 bytes) to a register. */ 938 #define ADW_WRITE_WORD_REGISTER(iot, ioh, reg_off, word) \ 939 bus_space_write_2((iot), (ioh), (reg_off), (word)) 940 941 /* Write double word (4 bytes) to a register. */ 942 #define ADW_WRITE_DWORD_REGISTER(iot, ioh, reg_off, dword) \ 943 bus_space_write_4((iot), (ioh), (reg_off), (dword)) 944 945 /* Read byte from LRAM. */ 946 #define ADW_READ_BYTE_LRAM(iot, ioh, addr, byte) \ 947 do { \ 948 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 949 (byte) = bus_space_read_1((iot), (ioh), IOPB_RAM_DATA); \ 950 } while (0) 951 952 /* Write byte to LRAM. */ 953 #define ADW_WRITE_BYTE_LRAM(iot, ioh, addr, byte) \ 954 do { \ 955 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 956 bus_space_write_1((iot), (ioh), IOPB_RAM_DATA, (byte)); \ 957 } while (0) 958 959 /* Read word (2 bytes) from LRAM. */ 960 #define ADW_READ_WORD_LRAM(iot, ioh, addr, word) \ 961 do { \ 962 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 963 (word) = bus_space_read_2((iot), (ioh), IOPW_RAM_DATA); \ 964 } while (0) 965 966 /* Write word (2 bytes) to LRAM. */ 967 #define ADW_WRITE_WORD_LRAM(iot, ioh, addr, word) \ 968 do { \ 969 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 970 bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, (word)); \ 971 } while (0) 972 973 /* Write double word (4 bytes) to LRAM */ 974 /* Because of unspecified C language ordering don't use auto-increment. */ 975 #define ADW_WRITE_DWORD_LRAM(iot, ioh, addr, dword) \ 976 do { \ 977 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 978 bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, \ 979 (ushort) ((dword) & 0xFFFF)); \ 980 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr) + 2); \ 981 bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, \ 982 (ushort) ((dword >> 16) & 0xFFFF)); \ 983 } while (0) 984 985 /* Read word (2 bytes) from LRAM assuming that the address is already set. */ 986 #define ADW_READ_WORD_AUTO_INC_LRAM(iot, ioh) \ 987 bus_space_read_2((iot), (ioh), IOPW_RAM_DATA) \ 988 989 /* Write word (2 bytes) to LRAM assuming that the address is already set. */ 990 #define ADW_WRITE_WORD_AUTO_INC_LRAM(iot, ioh, word) \ 991 bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, (word)) 992 993 /* 994 * Define macro to check for Condor signature. 995 * 996 * Evaluate to ADW_TRUE if a Condor chip is found the specified port 997 * address 'iop_base'. Otherwise evalue to ADW_FALSE. 998 */ 999 #define ADW_FIND_SIGNATURE(iot, ioh) \ 1000 (((ADW_READ_BYTE_REGISTER((iot), (ioh), IOPB_CHIP_ID_1) == \ 1001 ADW_CHIP_ID_BYTE) && \ 1002 (ADW_READ_WORD_REGISTER((iot), (ioh), IOPW_CHIP_ID_0) == \ 1003 ADW_CHIP_ID_WORD)) ? ADW_TRUE : ADW_FALSE) 1004 1005 /* 1006 * Define macro to Return the version number of the chip at 'iop_base'. 1007 * 1008 * The second parameter 'bus_type' is currently unused. 1009 */ 1010 #define ADW_GET_CHIP_VERSION(iot, ioh, bus_type) \ 1011 ADW_READ_BYTE_REGISTER((iot), (ioh), IOPB_CHIP_TYPE_REV) 1012 1013 /* 1014 * Abort an SRB in the chip's RISC Memory. The 'srb_ptr' argument must 1015 * match the ASC_SCSI_REQ_Q 'srb_ptr' field. 1016 * 1017 * If the request has not yet been sent to the device it will simply be 1018 * aborted from RISC memory. If the request is disconnected it will be 1019 * aborted on reselection by sending an Abort Message to the target ID. 1020 * 1021 * Return value: 1022 * ADW_TRUE(1) - Queue was successfully aborted. 1023 * ADW_FALSE(0) - Queue was not found on the active queue list. 1024 */ 1025 #define ADW_ABORT_CCB(sc, ccb_ptr) \ 1026 AdwSendIdleCmd((sc), (u_int16_t) IDLE_CMD_ABORT, (ccb_ptr)->hashkey) 1027 1028 /* 1029 * Send a Bus Device Reset Message to the specified target ID. 1030 * 1031 * All outstanding commands will be purged if sending the 1032 * Bus Device Reset Message is successful. 1033 * 1034 * Return Value: 1035 * ADW_TRUE(1) - All requests on the target are purged. 1036 * ADW_FALSE(0) - Couldn't issue Bus Device Reset Message; Requests 1037 * are not purged. 1038 */ 1039 #define ADW_RESET_DEVICE(sc, target_id) \ 1040 AdwSendIdleCmd((sc), (u_int16_t) IDLE_CMD_DEVICE_RESET, (target_id), 0) 1041 1042 /* 1043 * SCSI Wide Type definition. 1044 */ 1045 #define ADW_SCSI_BIT_ID_TYPE u_int16_t 1046 1047 /* 1048 * AdvInitScsiTarget() 'cntl_flag' options. 1049 */ 1050 #define ADW_SCAN_LUN 0x01 1051 #define ADW_CAPINFO_NOLUN 0x02 1052 1053 /* 1054 * Convert target id to target id bit mask. 1055 */ 1056 #define ADW_TID_TO_TIDMASK(tid) (0x01 << ((tid) & ADW_MAX_TID)) 1057 1058 /* 1059 * Adv Library functions available to drivers. 1060 */ 1061 1062 int AdwInitFromEEPROM __P((ADW_SOFTC *)); 1063 int AdwInitDriver __P((ADW_SOFTC *)); 1064 int AdwExeScsiQueue __P((ADW_SOFTC *, ADW_SCSI_REQ_Q *)); 1065 int AdwISR __P((ADW_SOFTC *)); 1066 void AdwResetChip __P((bus_space_tag_t, bus_space_handle_t)); 1067 int AdwSendIdleCmd __P((ADW_SOFTC *, u_int16_t, u_int32_t)); 1068 int AdwResetSCSIBus __P((ADW_SOFTC *)); 1069 int AdwResetCCB __P((ADW_SOFTC *)); 1070 1071 #endif /* _ADVANSYS_WIDE_LIBRARY_H_ */ 1072
Indexes created Mon Sep 22 13:09:51 GMT 2025