Home | History | Annotate | Line # | Download | only in ic
ahcisata_core.c revision 1.56
      1  1.56  christos /*	$NetBSD: ahcisata_core.c,v 1.56 2016/05/02 19:18:29 christos Exp $	*/
      2   1.1    bouyer 
      3   1.1    bouyer /*
      4   1.1    bouyer  * Copyright (c) 2006 Manuel Bouyer.
      5   1.1    bouyer  *
      6   1.1    bouyer  * Redistribution and use in source and binary forms, with or without
      7   1.1    bouyer  * modification, are permitted provided that the following conditions
      8   1.1    bouyer  * are met:
      9   1.1    bouyer  * 1. Redistributions of source code must retain the above copyright
     10   1.1    bouyer  *    notice, this list of conditions and the following disclaimer.
     11   1.1    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     12   1.1    bouyer  *    notice, this list of conditions and the following disclaimer in the
     13   1.1    bouyer  *    documentation and/or other materials provided with the distribution.
     14   1.1    bouyer  *
     15   1.1    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     16   1.1    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     17   1.1    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     18   1.1    bouyer  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     19   1.1    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     20   1.1    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     21   1.1    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     22   1.1    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     23   1.1    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     24   1.1    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     25   1.1    bouyer  *
     26   1.1    bouyer  */
     27   1.1    bouyer 
     28   1.1    bouyer #include <sys/cdefs.h>
     29  1.56  christos __KERNEL_RCSID(0, "$NetBSD: ahcisata_core.c,v 1.56 2016/05/02 19:18:29 christos Exp $");
     30   1.1    bouyer 
     31   1.1    bouyer #include <sys/types.h>
     32   1.1    bouyer #include <sys/malloc.h>
     33   1.1    bouyer #include <sys/param.h>
     34   1.1    bouyer #include <sys/kernel.h>
     35   1.1    bouyer #include <sys/systm.h>
     36   1.1    bouyer #include <sys/disklabel.h>
     37   1.4        ad #include <sys/proc.h>
     38   1.8    bouyer #include <sys/buf.h>
     39   1.1    bouyer 
     40   1.1    bouyer #include <dev/ata/atareg.h>
     41   1.1    bouyer #include <dev/ata/satavar.h>
     42   1.1    bouyer #include <dev/ata/satareg.h>
     43  1.26  jakllsch #include <dev/ata/satafisvar.h>
     44  1.20  jakllsch #include <dev/ata/satafisreg.h>
     45  1.40    bouyer #include <dev/ata/satapmpreg.h>
     46   1.1    bouyer #include <dev/ic/ahcisatavar.h>
     47  1.40    bouyer #include <dev/ic/wdcreg.h>
     48   1.1    bouyer 
     49  1.16    bouyer #include <dev/scsipi/scsi_all.h> /* for SCSI status */
     50  1.16    bouyer 
     51   1.8    bouyer #include "atapibus.h"
     52   1.8    bouyer 
     53   1.1    bouyer #ifdef AHCI_DEBUG
     54  1.40    bouyer int ahcidebug_mask = 0;
     55   1.1    bouyer #endif
     56   1.1    bouyer 
     57  1.29  jakllsch static void ahci_probe_drive(struct ata_channel *);
     58  1.29  jakllsch static void ahci_setup_channel(struct ata_channel *);
     59   1.1    bouyer 
     60  1.29  jakllsch static int  ahci_ata_bio(struct ata_drive_datas *, struct ata_bio *);
     61  1.40    bouyer static int  ahci_do_reset_drive(struct ata_channel *, int, int, uint32_t *);
     62  1.40    bouyer static void ahci_reset_drive(struct ata_drive_datas *, int, uint32_t *);
     63  1.29  jakllsch static void ahci_reset_channel(struct ata_channel *, int);
     64  1.29  jakllsch static int  ahci_exec_command(struct ata_drive_datas *, struct ata_command *);
     65  1.29  jakllsch static int  ahci_ata_addref(struct ata_drive_datas *);
     66  1.29  jakllsch static void ahci_ata_delref(struct ata_drive_datas *);
     67  1.29  jakllsch static void ahci_killpending(struct ata_drive_datas *);
     68  1.29  jakllsch 
     69  1.29  jakllsch static void ahci_cmd_start(struct ata_channel *, struct ata_xfer *);
     70  1.29  jakllsch static int  ahci_cmd_complete(struct ata_channel *, struct ata_xfer *, int);
     71  1.29  jakllsch static void ahci_cmd_done(struct ata_channel *, struct ata_xfer *, int);
     72  1.29  jakllsch static void ahci_cmd_kill_xfer(struct ata_channel *, struct ata_xfer *, int) ;
     73  1.29  jakllsch static void ahci_bio_start(struct ata_channel *, struct ata_xfer *);
     74  1.29  jakllsch static int  ahci_bio_complete(struct ata_channel *, struct ata_xfer *, int);
     75  1.29  jakllsch static void ahci_bio_kill_xfer(struct ata_channel *, struct ata_xfer *, int) ;
     76  1.29  jakllsch static void ahci_channel_stop(struct ahci_softc *, struct ata_channel *, int);
     77  1.40    bouyer static void ahci_channel_start(struct ahci_softc *, struct ata_channel *,
     78  1.40    bouyer 				int, int);
     79  1.29  jakllsch static void ahci_timeout(void *);
     80  1.29  jakllsch static int  ahci_dma_setup(struct ata_channel *, int, void *, size_t, int);
     81   1.1    bouyer 
     82   1.8    bouyer #if NATAPIBUS > 0
     83  1.29  jakllsch static void ahci_atapibus_attach(struct atabus_softc *);
     84  1.29  jakllsch static void ahci_atapi_kill_pending(struct scsipi_periph *);
     85  1.29  jakllsch static void ahci_atapi_minphys(struct buf *);
     86  1.29  jakllsch static void ahci_atapi_scsipi_request(struct scsipi_channel *,
     87   1.8    bouyer     scsipi_adapter_req_t, void *);
     88  1.29  jakllsch static void ahci_atapi_start(struct ata_channel *, struct ata_xfer *);
     89  1.29  jakllsch static int  ahci_atapi_complete(struct ata_channel *, struct ata_xfer *, int);
     90  1.29  jakllsch static void ahci_atapi_kill_xfer(struct ata_channel *, struct ata_xfer *, int);
     91  1.29  jakllsch static void ahci_atapi_probe_device(struct atapibus_softc *, int);
     92   1.8    bouyer 
     93   1.8    bouyer static const struct scsipi_bustype ahci_atapi_bustype = {
     94   1.8    bouyer 	SCSIPI_BUSTYPE_ATAPI,
     95   1.8    bouyer 	atapi_scsipi_cmd,
     96   1.8    bouyer 	atapi_interpret_sense,
     97   1.8    bouyer 	atapi_print_addr,
     98   1.8    bouyer 	ahci_atapi_kill_pending,
     99  1.34    bouyer 	NULL,
    100   1.8    bouyer };
    101   1.8    bouyer #endif /* NATAPIBUS */
    102   1.8    bouyer 
    103   1.1    bouyer #define ATA_DELAY 10000 /* 10s for a drive I/O */
    104  1.24    bouyer #define ATA_RESET_DELAY 31000 /* 31s for a drive reset */
    105  1.24    bouyer #define AHCI_RST_WAIT (ATA_RESET_DELAY / 10)
    106   1.1    bouyer 
    107   1.1    bouyer const struct ata_bustype ahci_ata_bustype = {
    108   1.1    bouyer 	SCSIPI_BUSTYPE_ATA,
    109   1.1    bouyer 	ahci_ata_bio,
    110   1.1    bouyer 	ahci_reset_drive,
    111   1.1    bouyer 	ahci_reset_channel,
    112   1.1    bouyer 	ahci_exec_command,
    113   1.1    bouyer 	ata_get_params,
    114   1.1    bouyer 	ahci_ata_addref,
    115   1.1    bouyer 	ahci_ata_delref,
    116   1.1    bouyer 	ahci_killpending
    117   1.1    bouyer };
    118   1.1    bouyer 
    119  1.29  jakllsch static void ahci_intr_port(struct ahci_softc *, struct ahci_channel *);
    120   1.7     joerg static void ahci_setup_port(struct ahci_softc *sc, int i);
    121   1.7     joerg 
    122  1.51  jmcneill static void
    123  1.51  jmcneill ahci_enable(struct ahci_softc *sc)
    124  1.51  jmcneill {
    125  1.51  jmcneill 	uint32_t ghc;
    126  1.51  jmcneill 
    127  1.51  jmcneill 	ghc = AHCI_READ(sc, AHCI_GHC);
    128  1.51  jmcneill 	if (!(ghc & AHCI_GHC_AE)) {
    129  1.51  jmcneill 		ghc |= AHCI_GHC_AE;
    130  1.51  jmcneill 		AHCI_WRITE(sc, AHCI_GHC, ghc);
    131  1.51  jmcneill 	}
    132  1.51  jmcneill }
    133  1.51  jmcneill 
    134  1.29  jakllsch static int
    135   1.7     joerg ahci_reset(struct ahci_softc *sc)
    136   1.1    bouyer {
    137   1.7     joerg 	int i;
    138   1.1    bouyer 
    139   1.1    bouyer 	/* reset controller */
    140   1.1    bouyer 	AHCI_WRITE(sc, AHCI_GHC, AHCI_GHC_HR);
    141   1.1    bouyer 	/* wait up to 1s for reset to complete */
    142   1.1    bouyer 	for (i = 0; i < 1000; i++) {
    143   1.6    bouyer 		delay(1000);
    144   1.1    bouyer 		if ((AHCI_READ(sc, AHCI_GHC) & AHCI_GHC_HR) == 0)
    145   1.1    bouyer 			break;
    146   1.1    bouyer 	}
    147   1.1    bouyer 	if ((AHCI_READ(sc, AHCI_GHC) & AHCI_GHC_HR)) {
    148   1.1    bouyer 		aprint_error("%s: reset failed\n", AHCINAME(sc));
    149   1.7     joerg 		return -1;
    150   1.1    bouyer 	}
    151   1.1    bouyer 	/* enable ahci mode */
    152  1.51  jmcneill 	ahci_enable(sc);
    153  1.51  jmcneill 
    154  1.51  jmcneill 	if (sc->sc_save_init_data) {
    155  1.51  jmcneill 		AHCI_WRITE(sc, AHCI_CAP, sc->sc_init_data.cap);
    156  1.51  jmcneill 		if (sc->sc_init_data.cap2)
    157  1.51  jmcneill 			AHCI_WRITE(sc, AHCI_CAP2, sc->sc_init_data.cap2);
    158  1.51  jmcneill 		AHCI_WRITE(sc, AHCI_PI, sc->sc_init_data.ports);
    159  1.51  jmcneill 	}
    160  1.51  jmcneill 
    161   1.7     joerg 	return 0;
    162   1.7     joerg }
    163   1.1    bouyer 
    164  1.29  jakllsch static void
    165   1.7     joerg ahci_setup_ports(struct ahci_softc *sc)
    166   1.7     joerg {
    167   1.7     joerg 	int i, port;
    168   1.7     joerg 
    169   1.7     joerg 	for (i = 0, port = 0; i < AHCI_MAX_PORTS; i++) {
    170  1.50      matt 		if ((sc->sc_ahci_ports & (1 << i)) == 0)
    171   1.7     joerg 			continue;
    172   1.7     joerg 		if (port >= sc->sc_atac.atac_nchannels) {
    173   1.7     joerg 			aprint_error("%s: more ports than announced\n",
    174   1.7     joerg 			    AHCINAME(sc));
    175   1.7     joerg 			break;
    176   1.7     joerg 		}
    177   1.7     joerg 		ahci_setup_port(sc, i);
    178   1.7     joerg 	}
    179   1.7     joerg }
    180   1.7     joerg 
    181  1.29  jakllsch static void
    182   1.7     joerg ahci_reprobe_drives(struct ahci_softc *sc)
    183   1.7     joerg {
    184   1.7     joerg 	int i, port;
    185   1.7     joerg 	struct ahci_channel *achp;
    186   1.7     joerg 	struct ata_channel *chp;
    187   1.7     joerg 
    188   1.7     joerg 	for (i = 0, port = 0; i < AHCI_MAX_PORTS; i++) {
    189  1.50      matt 		if ((sc->sc_ahci_ports & (1 << i)) == 0)
    190   1.7     joerg 			continue;
    191   1.7     joerg 		if (port >= sc->sc_atac.atac_nchannels) {
    192   1.7     joerg 			aprint_error("%s: more ports than announced\n",
    193   1.7     joerg 			    AHCINAME(sc));
    194   1.7     joerg 			break;
    195   1.7     joerg 		}
    196   1.7     joerg 		achp = &sc->sc_channels[i];
    197   1.7     joerg 		chp = &achp->ata_channel;
    198   1.7     joerg 
    199   1.7     joerg 		ahci_probe_drive(chp);
    200   1.7     joerg 	}
    201   1.7     joerg }
    202   1.7     joerg 
    203   1.7     joerg static void
    204   1.7     joerg ahci_setup_port(struct ahci_softc *sc, int i)
    205   1.7     joerg {
    206   1.7     joerg 	struct ahci_channel *achp;
    207   1.7     joerg 
    208   1.7     joerg 	achp = &sc->sc_channels[i];
    209   1.7     joerg 
    210   1.7     joerg 	AHCI_WRITE(sc, AHCI_P_CLB(i), achp->ahcic_bus_cmdh);
    211  1.28  jakllsch 	AHCI_WRITE(sc, AHCI_P_CLBU(i), (uint64_t)achp->ahcic_bus_cmdh>>32);
    212   1.7     joerg 	AHCI_WRITE(sc, AHCI_P_FB(i), achp->ahcic_bus_rfis);
    213  1.28  jakllsch 	AHCI_WRITE(sc, AHCI_P_FBU(i), (uint64_t)achp->ahcic_bus_rfis>>32);
    214   1.7     joerg }
    215   1.7     joerg 
    216  1.29  jakllsch static void
    217   1.7     joerg ahci_enable_intrs(struct ahci_softc *sc)
    218   1.7     joerg {
    219   1.7     joerg 
    220   1.7     joerg 	/* clear interrupts */
    221   1.7     joerg 	AHCI_WRITE(sc, AHCI_IS, AHCI_READ(sc, AHCI_IS));
    222   1.7     joerg 	/* enable interrupts */
    223   1.7     joerg 	AHCI_WRITE(sc, AHCI_GHC, AHCI_READ(sc, AHCI_GHC) | AHCI_GHC_IE);
    224   1.7     joerg }
    225   1.7     joerg 
    226   1.7     joerg void
    227   1.7     joerg ahci_attach(struct ahci_softc *sc)
    228   1.7     joerg {
    229  1.50      matt 	uint32_t ahci_rev;
    230   1.7     joerg 	int i, j, port;
    231   1.7     joerg 	struct ahci_channel *achp;
    232   1.7     joerg 	struct ata_channel *chp;
    233   1.7     joerg 	int error;
    234   1.7     joerg 	int dmasize;
    235  1.32  jakllsch 	char buf[128];
    236   1.7     joerg 	void *cmdhp;
    237   1.7     joerg 	void *cmdtblp;
    238   1.7     joerg 
    239  1.51  jmcneill 	if (sc->sc_save_init_data) {
    240  1.51  jmcneill 		ahci_enable(sc);
    241  1.51  jmcneill 
    242  1.51  jmcneill 		sc->sc_init_data.cap = AHCI_READ(sc, AHCI_CAP);
    243  1.51  jmcneill 		sc->sc_init_data.ports = AHCI_READ(sc, AHCI_PI);
    244  1.51  jmcneill 
    245  1.51  jmcneill 		ahci_rev = AHCI_READ(sc, AHCI_VS);
    246  1.51  jmcneill 		if (AHCI_VS_MJR(ahci_rev) > 1 ||
    247  1.51  jmcneill 		    (AHCI_VS_MJR(ahci_rev) == 1 && AHCI_VS_MNR(ahci_rev) >= 20)) {
    248  1.51  jmcneill 			sc->sc_init_data.cap2 = AHCI_READ(sc, AHCI_CAP2);
    249  1.51  jmcneill 		} else {
    250  1.51  jmcneill 			sc->sc_init_data.cap2 = 0;
    251  1.51  jmcneill 		}
    252  1.51  jmcneill 		if (sc->sc_init_data.ports == 0) {
    253  1.51  jmcneill 			sc->sc_init_data.ports = sc->sc_ahci_ports;
    254  1.51  jmcneill 		}
    255  1.51  jmcneill 	}
    256  1.51  jmcneill 
    257   1.7     joerg 	if (ahci_reset(sc) != 0)
    258   1.7     joerg 		return;
    259   1.1    bouyer 
    260  1.40    bouyer 	sc->sc_ahci_cap = AHCI_READ(sc, AHCI_CAP);
    261  1.43    bouyer 	if (sc->sc_ahci_quirks & AHCI_QUIRK_BADPMP) {
    262  1.41    bouyer 		aprint_verbose_dev(sc->sc_atac.atac_dev,
    263  1.41    bouyer 		    "ignoring broken port multiplier support\n");
    264  1.41    bouyer 		sc->sc_ahci_cap &= ~AHCI_CAP_SPM;
    265  1.41    bouyer 	}
    266  1.40    bouyer 	sc->sc_atac.atac_nchannels = (sc->sc_ahci_cap & AHCI_CAP_NPMASK) + 1;
    267  1.40    bouyer 	sc->sc_ncmds = ((sc->sc_ahci_cap & AHCI_CAP_NCS) >> 8) + 1;
    268   1.1    bouyer 	ahci_rev = AHCI_READ(sc, AHCI_VS);
    269  1.32  jakllsch 	snprintb(buf, sizeof(buf), "\177\020"
    270  1.32  jakllsch 			/* "f\000\005NP\0" */
    271  1.32  jakllsch 			"b\005SXS\0"
    272  1.32  jakllsch 			"b\006EMS\0"
    273  1.32  jakllsch 			"b\007CCCS\0"
    274  1.32  jakllsch 			/* "f\010\005NCS\0" */
    275  1.32  jakllsch 			"b\015PSC\0"
    276  1.32  jakllsch 			"b\016SSC\0"
    277  1.32  jakllsch 			"b\017PMD\0"
    278  1.32  jakllsch 			"b\020FBSS\0"
    279  1.32  jakllsch 			"b\021SPM\0"
    280  1.32  jakllsch 			"b\022SAM\0"
    281  1.32  jakllsch 			"b\023SNZO\0"
    282  1.32  jakllsch 			"f\024\003ISS\0"
    283  1.32  jakllsch 			"=\001Gen1\0"
    284  1.32  jakllsch 			"=\002Gen2\0"
    285  1.32  jakllsch 			"=\003Gen3\0"
    286  1.32  jakllsch 			"b\030SCLO\0"
    287  1.32  jakllsch 			"b\031SAL\0"
    288  1.32  jakllsch 			"b\032SALP\0"
    289  1.32  jakllsch 			"b\033SSS\0"
    290  1.32  jakllsch 			"b\034SMPS\0"
    291  1.32  jakllsch 			"b\035SSNTF\0"
    292  1.32  jakllsch 			"b\036SNCQ\0"
    293  1.32  jakllsch 			"b\037S64A\0"
    294  1.40    bouyer 			"\0", sc->sc_ahci_cap);
    295  1.32  jakllsch 	aprint_normal_dev(sc->sc_atac.atac_dev, "AHCI revision %u.%u"
    296  1.49      matt 	    ", %d port%s, %d slot%s, CAP %s\n",
    297  1.32  jakllsch 	    AHCI_VS_MJR(ahci_rev), AHCI_VS_MNR(ahci_rev),
    298  1.49      matt 	    sc->sc_atac.atac_nchannels,
    299  1.49      matt 	    (sc->sc_atac.atac_nchannels == 1 ? "" : "s"),
    300  1.49      matt 	    sc->sc_ncmds, (sc->sc_ncmds == 1 ? "" : "s"), buf);
    301   1.1    bouyer 
    302   1.1    bouyer 	sc->sc_atac.atac_cap = ATAC_CAP_DATA16 | ATAC_CAP_DMA | ATAC_CAP_UDMA;
    303  1.12   xtraeme 	sc->sc_atac.atac_cap |= sc->sc_atac_capflags;
    304   1.1    bouyer 	sc->sc_atac.atac_pio_cap = 4;
    305   1.1    bouyer 	sc->sc_atac.atac_dma_cap = 2;
    306   1.1    bouyer 	sc->sc_atac.atac_udma_cap = 6;
    307   1.1    bouyer 	sc->sc_atac.atac_channels = sc->sc_chanarray;
    308   1.1    bouyer 	sc->sc_atac.atac_probe = ahci_probe_drive;
    309   1.1    bouyer 	sc->sc_atac.atac_bustype_ata = &ahci_ata_bustype;
    310   1.1    bouyer 	sc->sc_atac.atac_set_modes = ahci_setup_channel;
    311   1.8    bouyer #if NATAPIBUS > 0
    312   1.8    bouyer 	sc->sc_atac.atac_atapibus_attach = ahci_atapibus_attach;
    313   1.8    bouyer #endif
    314   1.1    bouyer 
    315   1.1    bouyer 	dmasize =
    316   1.1    bouyer 	    (AHCI_RFIS_SIZE + AHCI_CMDH_SIZE) * sc->sc_atac.atac_nchannels;
    317   1.1    bouyer 	error = bus_dmamem_alloc(sc->sc_dmat, dmasize, PAGE_SIZE, 0,
    318  1.29  jakllsch 	    &sc->sc_cmd_hdr_seg, 1, &sc->sc_cmd_hdr_nseg, BUS_DMA_NOWAIT);
    319   1.1    bouyer 	if (error) {
    320   1.1    bouyer 		aprint_error("%s: unable to allocate command header memory"
    321   1.1    bouyer 		    ", error=%d\n", AHCINAME(sc), error);
    322   1.1    bouyer 		return;
    323   1.1    bouyer 	}
    324  1.29  jakllsch 	error = bus_dmamem_map(sc->sc_dmat, &sc->sc_cmd_hdr_seg,
    325  1.29  jakllsch 	    sc->sc_cmd_hdr_nseg, dmasize,
    326   1.1    bouyer 	    &cmdhp, BUS_DMA_NOWAIT|BUS_DMA_COHERENT);
    327   1.1    bouyer 	if (error) {
    328   1.1    bouyer 		aprint_error("%s: unable to map command header memory"
    329   1.1    bouyer 		    ", error=%d\n", AHCINAME(sc), error);
    330   1.1    bouyer 		return;
    331   1.1    bouyer 	}
    332   1.1    bouyer 	error = bus_dmamap_create(sc->sc_dmat, dmasize, 1, dmasize, 0,
    333   1.1    bouyer 	    BUS_DMA_NOWAIT, &sc->sc_cmd_hdrd);
    334   1.1    bouyer 	if (error) {
    335   1.1    bouyer 		aprint_error("%s: unable to create command header map"
    336   1.1    bouyer 		    ", error=%d\n", AHCINAME(sc), error);
    337   1.1    bouyer 		return;
    338   1.1    bouyer 	}
    339   1.1    bouyer 	error = bus_dmamap_load(sc->sc_dmat, sc->sc_cmd_hdrd,
    340   1.1    bouyer 	    cmdhp, dmasize, NULL, BUS_DMA_NOWAIT);
    341   1.1    bouyer 	if (error) {
    342   1.1    bouyer 		aprint_error("%s: unable to load command header map"
    343   1.1    bouyer 		    ", error=%d\n", AHCINAME(sc), error);
    344   1.1    bouyer 		return;
    345   1.1    bouyer 	}
    346   1.1    bouyer 	sc->sc_cmd_hdr = cmdhp;
    347   1.1    bouyer 
    348   1.7     joerg 	ahci_enable_intrs(sc);
    349   1.1    bouyer 
    350  1.50      matt 	if (sc->sc_ahci_ports == 0) {
    351  1.50      matt 		sc->sc_ahci_ports = AHCI_READ(sc, AHCI_PI);
    352  1.50      matt 		AHCIDEBUG_PRINT(("active ports %#x\n", sc->sc_ahci_ports),
    353  1.50      matt 		    DEBUG_PROBE);
    354  1.50      matt 	}
    355   1.1    bouyer 	for (i = 0, port = 0; i < AHCI_MAX_PORTS; i++) {
    356  1.50      matt 		if ((sc->sc_ahci_ports & (1 << i)) == 0)
    357   1.1    bouyer 			continue;
    358   1.1    bouyer 		if (port >= sc->sc_atac.atac_nchannels) {
    359   1.1    bouyer 			aprint_error("%s: more ports than announced\n",
    360   1.1    bouyer 			    AHCINAME(sc));
    361   1.1    bouyer 			break;
    362   1.1    bouyer 		}
    363   1.1    bouyer 		achp = &sc->sc_channels[i];
    364  1.29  jakllsch 		chp = &achp->ata_channel;
    365   1.1    bouyer 		sc->sc_chanarray[i] = chp;
    366   1.1    bouyer 		chp->ch_channel = i;
    367   1.1    bouyer 		chp->ch_atac = &sc->sc_atac;
    368   1.1    bouyer 		chp->ch_queue = malloc(sizeof(struct ata_queue),
    369  1.48      matt 		    M_DEVBUF, M_NOWAIT|M_ZERO);
    370   1.1    bouyer 		if (chp->ch_queue == NULL) {
    371   1.1    bouyer 			aprint_error("%s port %d: can't allocate memory for "
    372   1.1    bouyer 			    "command queue", AHCINAME(sc), i);
    373   1.1    bouyer 			break;
    374   1.1    bouyer 		}
    375   1.1    bouyer 		dmasize = AHCI_CMDTBL_SIZE * sc->sc_ncmds;
    376   1.1    bouyer 		error = bus_dmamem_alloc(sc->sc_dmat, dmasize, PAGE_SIZE, 0,
    377  1.29  jakllsch 		    &achp->ahcic_cmd_tbl_seg, 1, &achp->ahcic_cmd_tbl_nseg,
    378  1.29  jakllsch 		    BUS_DMA_NOWAIT);
    379   1.1    bouyer 		if (error) {
    380   1.1    bouyer 			aprint_error("%s: unable to allocate command table "
    381   1.1    bouyer 			    "memory, error=%d\n", AHCINAME(sc), error);
    382   1.1    bouyer 			break;
    383   1.1    bouyer 		}
    384  1.29  jakllsch 		error = bus_dmamem_map(sc->sc_dmat, &achp->ahcic_cmd_tbl_seg,
    385  1.29  jakllsch 		    achp->ahcic_cmd_tbl_nseg, dmasize,
    386   1.1    bouyer 		    &cmdtblp, BUS_DMA_NOWAIT|BUS_DMA_COHERENT);
    387   1.1    bouyer 		if (error) {
    388   1.1    bouyer 			aprint_error("%s: unable to map command table memory"
    389   1.1    bouyer 			    ", error=%d\n", AHCINAME(sc), error);
    390   1.1    bouyer 			break;
    391   1.1    bouyer 		}
    392   1.1    bouyer 		error = bus_dmamap_create(sc->sc_dmat, dmasize, 1, dmasize, 0,
    393   1.1    bouyer 		    BUS_DMA_NOWAIT, &achp->ahcic_cmd_tbld);
    394   1.1    bouyer 		if (error) {
    395   1.1    bouyer 			aprint_error("%s: unable to create command table map"
    396   1.1    bouyer 			    ", error=%d\n", AHCINAME(sc), error);
    397   1.1    bouyer 			break;
    398   1.1    bouyer 		}
    399   1.1    bouyer 		error = bus_dmamap_load(sc->sc_dmat, achp->ahcic_cmd_tbld,
    400   1.1    bouyer 		    cmdtblp, dmasize, NULL, BUS_DMA_NOWAIT);
    401   1.1    bouyer 		if (error) {
    402   1.1    bouyer 			aprint_error("%s: unable to load command table map"
    403   1.1    bouyer 			    ", error=%d\n", AHCINAME(sc), error);
    404   1.1    bouyer 			break;
    405   1.1    bouyer 		}
    406   1.1    bouyer 		achp->ahcic_cmdh  = (struct ahci_cmd_header *)
    407   1.1    bouyer 		    ((char *)cmdhp + AHCI_CMDH_SIZE * port);
    408   1.1    bouyer 		achp->ahcic_bus_cmdh = sc->sc_cmd_hdrd->dm_segs[0].ds_addr +
    409   1.1    bouyer 		    AHCI_CMDH_SIZE * port;
    410   1.1    bouyer 		achp->ahcic_rfis = (struct ahci_r_fis *)
    411   1.1    bouyer 		    ((char *)cmdhp +
    412   1.1    bouyer 		     AHCI_CMDH_SIZE * sc->sc_atac.atac_nchannels +
    413   1.1    bouyer 		     AHCI_RFIS_SIZE * port);
    414   1.1    bouyer 		achp->ahcic_bus_rfis = sc->sc_cmd_hdrd->dm_segs[0].ds_addr +
    415   1.1    bouyer 		     AHCI_CMDH_SIZE * sc->sc_atac.atac_nchannels +
    416   1.1    bouyer 		     AHCI_RFIS_SIZE * port;
    417  1.28  jakllsch 		AHCIDEBUG_PRINT(("port %d cmdh %p (0x%" PRIx64 ") "
    418  1.28  jakllsch 				         "rfis %p (0x%" PRIx64 ")\n", i,
    419  1.28  jakllsch 		   achp->ahcic_cmdh, (uint64_t)achp->ahcic_bus_cmdh,
    420  1.28  jakllsch 		   achp->ahcic_rfis, (uint64_t)achp->ahcic_bus_rfis),
    421   1.1    bouyer 		   DEBUG_PROBE);
    422   1.1    bouyer 
    423   1.1    bouyer 		for (j = 0; j < sc->sc_ncmds; j++) {
    424   1.1    bouyer 			achp->ahcic_cmd_tbl[j] = (struct ahci_cmd_tbl *)
    425   1.1    bouyer 			    ((char *)cmdtblp + AHCI_CMDTBL_SIZE * j);
    426   1.1    bouyer 			achp->ahcic_bus_cmd_tbl[j] =
    427   1.1    bouyer 			     achp->ahcic_cmd_tbld->dm_segs[0].ds_addr +
    428   1.1    bouyer 			     AHCI_CMDTBL_SIZE * j;
    429   1.1    bouyer 			achp->ahcic_cmdh[j].cmdh_cmdtba =
    430  1.28  jakllsch 			    htole64(achp->ahcic_bus_cmd_tbl[j]);
    431  1.28  jakllsch 			AHCIDEBUG_PRINT(("port %d/%d tbl %p (0x%" PRIx64 ")\n", i, j,
    432   1.1    bouyer 			    achp->ahcic_cmd_tbl[j],
    433  1.28  jakllsch 			    (uint64_t)achp->ahcic_bus_cmd_tbl[j]), DEBUG_PROBE);
    434   1.1    bouyer 			/* The xfer DMA map */
    435   1.1    bouyer 			error = bus_dmamap_create(sc->sc_dmat, MAXPHYS,
    436   1.1    bouyer 			    AHCI_NPRD, 0x400000 /* 4MB */, 0,
    437   1.1    bouyer 			    BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
    438   1.1    bouyer 			    &achp->ahcic_datad[j]);
    439   1.1    bouyer 			if (error) {
    440   1.1    bouyer 				aprint_error("%s: couldn't alloc xfer DMA map, "
    441   1.1    bouyer 				    "error=%d\n", AHCINAME(sc), error);
    442   1.1    bouyer 				goto end;
    443   1.1    bouyer 			}
    444   1.1    bouyer 		}
    445   1.7     joerg 		ahci_setup_port(sc, i);
    446   1.1    bouyer 		if (bus_space_subregion(sc->sc_ahcit, sc->sc_ahcih,
    447  1.22  jakllsch 		    AHCI_P_SSTS(i), 4,  &achp->ahcic_sstatus) != 0) {
    448   1.1    bouyer 			aprint_error("%s: couldn't map channel %d "
    449   1.1    bouyer 			    "sata_status regs\n", AHCINAME(sc), i);
    450   1.1    bouyer 			break;
    451   1.1    bouyer 		}
    452   1.1    bouyer 		if (bus_space_subregion(sc->sc_ahcit, sc->sc_ahcih,
    453  1.22  jakllsch 		    AHCI_P_SCTL(i), 4,  &achp->ahcic_scontrol) != 0) {
    454   1.1    bouyer 			aprint_error("%s: couldn't map channel %d "
    455   1.1    bouyer 			    "sata_control regs\n", AHCINAME(sc), i);
    456   1.1    bouyer 			break;
    457   1.1    bouyer 		}
    458   1.1    bouyer 		if (bus_space_subregion(sc->sc_ahcit, sc->sc_ahcih,
    459  1.22  jakllsch 		    AHCI_P_SERR(i), 4,  &achp->ahcic_serror) != 0) {
    460   1.1    bouyer 			aprint_error("%s: couldn't map channel %d "
    461   1.1    bouyer 			    "sata_error regs\n", AHCINAME(sc), i);
    462   1.1    bouyer 			break;
    463   1.1    bouyer 		}
    464   1.1    bouyer 		ata_channel_attach(chp);
    465   1.1    bouyer 		port++;
    466   1.1    bouyer end:
    467   1.1    bouyer 		continue;
    468   1.1    bouyer 	}
    469   1.1    bouyer }
    470   1.1    bouyer 
    471   1.1    bouyer int
    472  1.29  jakllsch ahci_detach(struct ahci_softc *sc, int flags)
    473  1.29  jakllsch {
    474  1.29  jakllsch 	struct atac_softc *atac;
    475  1.29  jakllsch 	struct ahci_channel *achp;
    476  1.29  jakllsch 	struct ata_channel *chp;
    477  1.29  jakllsch 	struct scsipi_adapter *adapt;
    478  1.29  jakllsch 	int i, j;
    479  1.29  jakllsch 	int error;
    480  1.29  jakllsch 
    481  1.29  jakllsch 	atac = &sc->sc_atac;
    482  1.29  jakllsch 	adapt = &atac->atac_atapi_adapter._generic;
    483  1.29  jakllsch 
    484  1.29  jakllsch 	for (i = 0; i < AHCI_MAX_PORTS; i++) {
    485  1.29  jakllsch 		achp = &sc->sc_channels[i];
    486  1.29  jakllsch 		chp = &achp->ata_channel;
    487  1.29  jakllsch 
    488  1.50      matt 		if ((sc->sc_ahci_ports & (1 << i)) == 0)
    489  1.29  jakllsch 			continue;
    490  1.29  jakllsch 		if (i >= sc->sc_atac.atac_nchannels) {
    491  1.29  jakllsch 			aprint_error("%s: more ports than announced\n",
    492  1.29  jakllsch 			    AHCINAME(sc));
    493  1.29  jakllsch 			break;
    494  1.29  jakllsch 		}
    495  1.29  jakllsch 
    496  1.29  jakllsch 		if (chp->atabus == NULL)
    497  1.29  jakllsch 			continue;
    498  1.29  jakllsch 		if ((error = config_detach(chp->atabus, flags)) != 0)
    499  1.29  jakllsch 			return error;
    500  1.29  jakllsch 
    501  1.29  jakllsch 		for (j = 0; j < sc->sc_ncmds; j++)
    502  1.29  jakllsch 			bus_dmamap_destroy(sc->sc_dmat, achp->ahcic_datad[j]);
    503  1.29  jakllsch 
    504  1.29  jakllsch 		bus_dmamap_unload(sc->sc_dmat, achp->ahcic_cmd_tbld);
    505  1.29  jakllsch 		bus_dmamap_destroy(sc->sc_dmat, achp->ahcic_cmd_tbld);
    506  1.29  jakllsch 		bus_dmamem_unmap(sc->sc_dmat, achp->ahcic_cmd_tbl[0],
    507  1.29  jakllsch 		    AHCI_CMDTBL_SIZE * sc->sc_ncmds);
    508  1.29  jakllsch 		bus_dmamem_free(sc->sc_dmat, &achp->ahcic_cmd_tbl_seg,
    509  1.29  jakllsch 		    achp->ahcic_cmd_tbl_nseg);
    510  1.29  jakllsch 
    511  1.29  jakllsch 		free(chp->ch_queue, M_DEVBUF);
    512  1.29  jakllsch 		chp->atabus = NULL;
    513  1.29  jakllsch 	}
    514  1.29  jakllsch 
    515  1.29  jakllsch 	bus_dmamap_unload(sc->sc_dmat, sc->sc_cmd_hdrd);
    516  1.29  jakllsch 	bus_dmamap_destroy(sc->sc_dmat, sc->sc_cmd_hdrd);
    517  1.29  jakllsch 	bus_dmamem_unmap(sc->sc_dmat, sc->sc_cmd_hdr,
    518  1.29  jakllsch 	    (AHCI_RFIS_SIZE + AHCI_CMDH_SIZE) * sc->sc_atac.atac_nchannels);
    519  1.29  jakllsch 	bus_dmamem_free(sc->sc_dmat, &sc->sc_cmd_hdr_seg, sc->sc_cmd_hdr_nseg);
    520  1.29  jakllsch 
    521  1.29  jakllsch 	if (adapt->adapt_refcnt != 0)
    522  1.29  jakllsch 		return EBUSY;
    523  1.29  jakllsch 
    524  1.29  jakllsch 	return 0;
    525  1.29  jakllsch }
    526  1.29  jakllsch 
    527  1.29  jakllsch void
    528  1.29  jakllsch ahci_resume(struct ahci_softc *sc)
    529  1.29  jakllsch {
    530  1.29  jakllsch 	ahci_reset(sc);
    531  1.29  jakllsch 	ahci_setup_ports(sc);
    532  1.29  jakllsch 	ahci_reprobe_drives(sc);
    533  1.29  jakllsch 	ahci_enable_intrs(sc);
    534  1.29  jakllsch }
    535  1.29  jakllsch 
    536  1.29  jakllsch int
    537   1.1    bouyer ahci_intr(void *v)
    538   1.1    bouyer {
    539   1.1    bouyer 	struct ahci_softc *sc = v;
    540  1.27  jakllsch 	uint32_t is;
    541   1.1    bouyer 	int i, r = 0;
    542   1.1    bouyer 
    543   1.1    bouyer 	while ((is = AHCI_READ(sc, AHCI_IS))) {
    544   1.1    bouyer 		AHCIDEBUG_PRINT(("%s ahci_intr 0x%x\n", AHCINAME(sc), is),
    545   1.1    bouyer 		    DEBUG_INTR);
    546   1.1    bouyer 		r = 1;
    547   1.1    bouyer 		AHCI_WRITE(sc, AHCI_IS, is);
    548   1.1    bouyer 		for (i = 0; i < AHCI_MAX_PORTS; i++)
    549   1.1    bouyer 			if (is & (1 << i))
    550   1.1    bouyer 				ahci_intr_port(sc, &sc->sc_channels[i]);
    551   1.1    bouyer 	}
    552   1.1    bouyer 	return r;
    553   1.1    bouyer }
    554   1.1    bouyer 
    555  1.29  jakllsch static void
    556   1.1    bouyer ahci_intr_port(struct ahci_softc *sc, struct ahci_channel *achp)
    557   1.1    bouyer {
    558  1.27  jakllsch 	uint32_t is, tfd;
    559   1.1    bouyer 	struct ata_channel *chp = &achp->ata_channel;
    560   1.1    bouyer 	struct ata_xfer *xfer = chp->ch_queue->active_xfer;
    561   1.1    bouyer 	int slot;
    562   1.1    bouyer 
    563   1.1    bouyer 	is = AHCI_READ(sc, AHCI_P_IS(chp->ch_channel));
    564   1.1    bouyer 	AHCI_WRITE(sc, AHCI_P_IS(chp->ch_channel), is);
    565   1.1    bouyer 	AHCIDEBUG_PRINT(("ahci_intr_port %s port %d is 0x%x CI 0x%x\n", AHCINAME(sc),
    566   1.1    bouyer 	    chp->ch_channel, is, AHCI_READ(sc, AHCI_P_CI(chp->ch_channel))),
    567   1.1    bouyer 	    DEBUG_INTR);
    568   1.1    bouyer 
    569   1.1    bouyer 	if (is & (AHCI_P_IX_TFES | AHCI_P_IX_HBFS | AHCI_P_IX_IFS |
    570   1.1    bouyer 	    AHCI_P_IX_OFS | AHCI_P_IX_UFS)) {
    571   1.1    bouyer 		slot = (AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel))
    572   1.1    bouyer 			& AHCI_P_CMD_CCS_MASK) >> AHCI_P_CMD_CCS_SHIFT;
    573   1.1    bouyer 		if ((achp->ahcic_cmds_active & (1 << slot)) == 0)
    574   1.1    bouyer 			return;
    575   1.1    bouyer 		/* stop channel */
    576   1.5    bouyer 		ahci_channel_stop(sc, chp, 0);
    577   1.1    bouyer 		if (slot != 0) {
    578   1.1    bouyer 			printf("ahci_intr_port: slot %d\n", slot);
    579   1.1    bouyer 			panic("ahci_intr_port");
    580   1.1    bouyer 		}
    581   1.1    bouyer 		if (is & AHCI_P_IX_TFES) {
    582   1.1    bouyer 			tfd = AHCI_READ(sc, AHCI_P_TFD(chp->ch_channel));
    583   1.1    bouyer 			chp->ch_error =
    584   1.1    bouyer 			    (tfd & AHCI_P_TFD_ERR_MASK) >> AHCI_P_TFD_ERR_SHIFT;
    585   1.1    bouyer 			chp->ch_status = (tfd & 0xff);
    586   1.1    bouyer 		} else {
    587   1.1    bouyer 			/* emulate a CRC error */
    588   1.1    bouyer 			chp->ch_error = WDCE_CRC;
    589   1.1    bouyer 			chp->ch_status = WDCS_ERR;
    590   1.1    bouyer 		}
    591  1.40    bouyer 		if (is & AHCI_P_IX_IFS) {
    592  1.40    bouyer 			aprint_error("%s port %d: SERR 0x%x\n",
    593  1.40    bouyer 			    AHCINAME(sc), chp->ch_channel,
    594  1.40    bouyer 			    AHCI_READ(sc, AHCI_P_SERR(chp->ch_channel)));
    595  1.40    bouyer 		}
    596   1.1    bouyer 		xfer->c_intr(chp, xfer, is);
    597   1.5    bouyer 		/* if channel has not been restarted, do it now */
    598   1.5    bouyer 		if ((AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)) & AHCI_P_CMD_CR)
    599   1.5    bouyer 		    == 0)
    600  1.40    bouyer 			ahci_channel_start(sc, chp, 0, 0);
    601   1.1    bouyer 	} else {
    602   1.1    bouyer 		slot = 0; /* XXX */
    603   1.1    bouyer 		is = AHCI_READ(sc, AHCI_P_IS(chp->ch_channel));
    604   1.1    bouyer 		AHCIDEBUG_PRINT(("ahci_intr_port port %d is 0x%x act 0x%x CI 0x%x\n",
    605   1.1    bouyer 		    chp->ch_channel, is, achp->ahcic_cmds_active,
    606   1.1    bouyer 		    AHCI_READ(sc, AHCI_P_CI(chp->ch_channel))), DEBUG_INTR);
    607   1.1    bouyer 		if ((achp->ahcic_cmds_active & (1 << slot)) == 0)
    608   1.1    bouyer 			return;
    609   1.1    bouyer 		if ((AHCI_READ(sc, AHCI_P_CI(chp->ch_channel)) & (1 << slot))
    610   1.1    bouyer 		    == 0) {
    611   1.1    bouyer 			xfer->c_intr(chp, xfer, 0);
    612   1.1    bouyer 		}
    613   1.1    bouyer 	}
    614   1.1    bouyer }
    615   1.1    bouyer 
    616  1.29  jakllsch static void
    617  1.40    bouyer ahci_reset_drive(struct ata_drive_datas *drvp, int flags, uint32_t *sigp)
    618   1.1    bouyer {
    619   1.1    bouyer 	struct ata_channel *chp = drvp->chnl_softc;
    620  1.40    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
    621  1.40    bouyer 	AHCI_WRITE(sc, AHCI_GHC,
    622  1.40    bouyer 	    AHCI_READ(sc, AHCI_GHC) & ~AHCI_GHC_IE);
    623  1.40    bouyer 	ahci_channel_stop(sc, chp, flags);
    624  1.40    bouyer 	if (ahci_do_reset_drive(chp, drvp->drive, flags, sigp) != 0)
    625  1.40    bouyer 		ata_reset_channel(chp, flags);
    626  1.40    bouyer 	AHCI_WRITE(sc, AHCI_GHC, AHCI_READ(sc, AHCI_GHC) | AHCI_GHC_IE);
    627   1.1    bouyer 	return;
    628   1.1    bouyer }
    629   1.1    bouyer 
    630  1.40    bouyer /* return error code from ata_bio */
    631  1.40    bouyer static int
    632  1.40    bouyer ahci_exec_fis(struct ata_channel *chp, int timeout, int flags)
    633  1.40    bouyer {
    634  1.40    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
    635  1.40    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
    636  1.40    bouyer 	int i;
    637  1.40    bouyer 	uint32_t is;
    638  1.40    bouyer 
    639  1.52     joerg 	/*
    640  1.52     joerg 	 * Base timeout is specified in ms.
    641  1.52     joerg 	 * If we are allowed to sleep, wait a tick each round.
    642  1.53     joerg 	 * Otherwise delay for 10ms on each round.
    643  1.52     joerg 	 */
    644  1.52     joerg 	if (flags & AT_WAIT)
    645  1.52     joerg 		timeout = MAX(1, mstohz(timeout));
    646  1.53     joerg 	else
    647  1.53     joerg 		timeout = timeout / 10;
    648  1.52     joerg 
    649  1.40    bouyer 	AHCI_CMDH_SYNC(sc, achp, 0, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
    650  1.40    bouyer 	/* start command */
    651  1.40    bouyer 	AHCI_WRITE(sc, AHCI_P_CI(chp->ch_channel), 1 << 0);
    652  1.40    bouyer 	for (i = 0; i < timeout; i++) {
    653  1.40    bouyer 		if ((AHCI_READ(sc, AHCI_P_CI(chp->ch_channel)) & 1 << 0) == 0)
    654  1.40    bouyer 			return 0;
    655  1.40    bouyer 		is = AHCI_READ(sc, AHCI_P_IS(chp->ch_channel));
    656  1.40    bouyer 		if (is & (AHCI_P_IX_TFES | AHCI_P_IX_HBFS | AHCI_P_IX_IFS |
    657  1.40    bouyer 		    AHCI_P_IX_OFS | AHCI_P_IX_UFS)) {
    658  1.40    bouyer 			if ((is & (AHCI_P_IX_DHRS|AHCI_P_IX_TFES)) ==
    659  1.40    bouyer 			    (AHCI_P_IX_DHRS|AHCI_P_IX_TFES)) {
    660  1.40    bouyer 				/*
    661  1.40    bouyer 				 * we got the D2H FIS anyway,
    662  1.40    bouyer 				 * assume sig is valid.
    663  1.40    bouyer 				 * channel is restarted later
    664  1.40    bouyer 				 */
    665  1.40    bouyer 				return ERROR;
    666  1.40    bouyer 			}
    667  1.40    bouyer 			aprint_debug("%s channel %d: error 0x%x sending FIS\n",
    668  1.40    bouyer 			    AHCINAME(sc), chp->ch_channel, is);
    669  1.40    bouyer 			return ERR_DF;
    670  1.40    bouyer 		}
    671  1.40    bouyer 		if (flags & AT_WAIT)
    672  1.52     joerg 			tsleep(&sc, PRIBIO, "ahcifis", 1);
    673  1.40    bouyer 		else
    674  1.53     joerg 			delay(10000);
    675  1.40    bouyer 	}
    676  1.52     joerg 
    677  1.40    bouyer 	aprint_debug("%s channel %d: timeout sending FIS\n",
    678  1.40    bouyer 	    AHCINAME(sc), chp->ch_channel);
    679  1.40    bouyer 	return TIMEOUT;
    680  1.40    bouyer }
    681  1.40    bouyer 
    682  1.40    bouyer static int
    683  1.40    bouyer ahci_do_reset_drive(struct ata_channel *chp, int drive, int flags,
    684  1.40    bouyer     uint32_t *sigp)
    685  1.40    bouyer {
    686  1.40    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
    687  1.40    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
    688  1.40    bouyer 	struct ahci_cmd_tbl *cmd_tbl;
    689  1.40    bouyer 	struct ahci_cmd_header *cmd_h;
    690  1.40    bouyer 	int i;
    691  1.40    bouyer 	uint32_t sig;
    692  1.40    bouyer 
    693  1.40    bouyer 	KASSERT((AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)) & AHCI_P_CMD_CR) == 0);
    694  1.42    bouyer again:
    695  1.40    bouyer 	/* clear port interrupt register */
    696  1.40    bouyer 	AHCI_WRITE(sc, AHCI_P_IS(chp->ch_channel), 0xffffffff);
    697  1.40    bouyer 	/* clear SErrors and start operations */
    698  1.40    bouyer 	if ((sc->sc_ahci_cap & AHCI_CAP_CLO) == AHCI_CAP_CLO) {
    699  1.40    bouyer 		/*
    700  1.40    bouyer 		 * issue a command list override to clear BSY.
    701  1.40    bouyer 		 * This is needed if there's a PMP with no drive
    702  1.40    bouyer 		 * on port 0
    703  1.40    bouyer 		 */
    704  1.40    bouyer 		ahci_channel_start(sc, chp, flags, 1);
    705  1.40    bouyer 	} else {
    706  1.40    bouyer 		ahci_channel_start(sc, chp, flags, 0);
    707  1.40    bouyer 	}
    708  1.40    bouyer 	if (drive > 0) {
    709  1.40    bouyer 		KASSERT(sc->sc_ahci_cap & AHCI_CAP_SPM);
    710  1.40    bouyer 	}
    711  1.54  jmcneill 
    712  1.54  jmcneill 	if (sc->sc_ahci_quirks & AHCI_QUIRK_SKIP_RESET)
    713  1.54  jmcneill 		goto skip_reset;
    714  1.54  jmcneill 
    715  1.40    bouyer 	/* polled command, assume interrupts are disabled */
    716  1.40    bouyer 	/* use slot 0 to send reset, the channel is idle */
    717  1.40    bouyer 	cmd_h = &achp->ahcic_cmdh[0];
    718  1.40    bouyer 	cmd_tbl = achp->ahcic_cmd_tbl[0];
    719  1.40    bouyer 	cmd_h->cmdh_flags = htole16(AHCI_CMDH_F_RST | AHCI_CMDH_F_CBSY |
    720  1.40    bouyer 	    RHD_FISLEN / 4 | (drive << AHCI_CMDH_F_PMP_SHIFT));
    721  1.40    bouyer 	cmd_h->cmdh_prdbc = 0;
    722  1.40    bouyer 	memset(cmd_tbl->cmdt_cfis, 0, 64);
    723  1.40    bouyer 	cmd_tbl->cmdt_cfis[fis_type] = RHD_FISTYPE;
    724  1.40    bouyer 	cmd_tbl->cmdt_cfis[rhd_c] = drive;
    725  1.40    bouyer 	cmd_tbl->cmdt_cfis[rhd_control] = WDCTL_RST;
    726  1.52     joerg 	switch(ahci_exec_fis(chp, 100, flags)) {
    727  1.40    bouyer 	case ERR_DF:
    728  1.40    bouyer 	case TIMEOUT:
    729  1.40    bouyer 		aprint_error("%s channel %d: setting WDCTL_RST failed "
    730  1.40    bouyer 		    "for drive %d\n", AHCINAME(sc), chp->ch_channel, drive);
    731  1.40    bouyer 		if (sigp)
    732  1.40    bouyer 			*sigp = 0xffffffff;
    733  1.40    bouyer 		goto end;
    734  1.40    bouyer 	default:
    735  1.40    bouyer 		break;
    736  1.40    bouyer 	}
    737  1.40    bouyer 	cmd_h->cmdh_flags = htole16(RHD_FISLEN / 4 |
    738  1.40    bouyer 	    (drive << AHCI_CMDH_F_PMP_SHIFT));
    739  1.40    bouyer 	cmd_h->cmdh_prdbc = 0;
    740  1.40    bouyer 	memset(cmd_tbl->cmdt_cfis, 0, 64);
    741  1.40    bouyer 	cmd_tbl->cmdt_cfis[fis_type] = RHD_FISTYPE;
    742  1.40    bouyer 	cmd_tbl->cmdt_cfis[rhd_c] = drive;
    743  1.40    bouyer 	cmd_tbl->cmdt_cfis[rhd_control] = 0;
    744  1.52     joerg 	switch(ahci_exec_fis(chp, 310, flags)) {
    745  1.40    bouyer 	case ERR_DF:
    746  1.40    bouyer 	case TIMEOUT:
    747  1.43    bouyer 		if ((sc->sc_ahci_quirks & AHCI_QUIRK_BADPMPRESET) != 0 &&
    748  1.41    bouyer 		    drive == PMP_PORT_CTL) {
    749  1.41    bouyer 			/*
    750  1.41    bouyer 			 * some controllers fails to reset when
    751  1.41    bouyer 			 * targeting a PMP but a single drive is attached.
    752  1.41    bouyer 			 * try again with port 0
    753  1.41    bouyer 			 */
    754  1.41    bouyer 			drive = 0;
    755  1.42    bouyer 			ahci_channel_stop(sc, chp, flags);
    756  1.41    bouyer 			goto again;
    757  1.41    bouyer 		}
    758  1.40    bouyer 		aprint_error("%s channel %d: clearing WDCTL_RST failed "
    759  1.40    bouyer 		    "for drive %d\n", AHCINAME(sc), chp->ch_channel, drive);
    760  1.40    bouyer 		if (sigp)
    761  1.40    bouyer 			*sigp = 0xffffffff;
    762  1.40    bouyer 		goto end;
    763  1.40    bouyer 	default:
    764  1.40    bouyer 		break;
    765  1.40    bouyer 	}
    766  1.54  jmcneill 
    767  1.54  jmcneill skip_reset:
    768  1.40    bouyer 	/*
    769  1.40    bouyer 	 * wait 31s for BSY to clear
    770  1.40    bouyer 	 * This should not be needed, but some controllers clear the
    771  1.40    bouyer 	 * command slot before receiving the D2H FIS ...
    772  1.40    bouyer 	 */
    773  1.46      matt 	for (i = 0; i < AHCI_RST_WAIT; i++) {
    774  1.40    bouyer 		sig = AHCI_READ(sc, AHCI_P_TFD(chp->ch_channel));
    775  1.46      matt 		if ((__SHIFTOUT(sig, AHCI_P_TFD_ST) & WDCS_BSY) == 0)
    776  1.40    bouyer 			break;
    777  1.45    bouyer 		if (flags & AT_WAIT)
    778  1.45    bouyer 			tsleep(&sc, PRIBIO, "ahcid2h", mstohz(10));
    779  1.45    bouyer 		else
    780  1.45    bouyer 			delay(10000);
    781  1.40    bouyer 	}
    782  1.40    bouyer 	if (i == AHCI_RST_WAIT) {
    783  1.40    bouyer 		aprint_error("%s: BSY never cleared, TD 0x%x\n",
    784  1.40    bouyer 		    AHCINAME(sc), sig);
    785  1.40    bouyer 		if (sigp)
    786  1.40    bouyer 			*sigp = 0xffffffff;
    787  1.40    bouyer 		goto end;
    788  1.40    bouyer 	}
    789  1.40    bouyer 	AHCIDEBUG_PRINT(("%s: BSY took %d ms\n", AHCINAME(sc), i * 10),
    790  1.40    bouyer 	    DEBUG_PROBE);
    791  1.40    bouyer 	sig = AHCI_READ(sc, AHCI_P_SIG(chp->ch_channel));
    792  1.40    bouyer 	if (sigp)
    793  1.40    bouyer 		*sigp = sig;
    794  1.40    bouyer 	AHCIDEBUG_PRINT(("%s: port %d: sig=0x%x CMD=0x%x\n",
    795  1.40    bouyer 	    AHCINAME(sc), chp->ch_channel, sig,
    796  1.40    bouyer 	    AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel))), DEBUG_PROBE);
    797  1.40    bouyer end:
    798  1.40    bouyer 	ahci_channel_stop(sc, chp, flags);
    799  1.45    bouyer 	if (flags & AT_WAIT)
    800  1.45    bouyer 		tsleep(&sc, PRIBIO, "ahcirst", mstohz(500));
    801  1.45    bouyer 	else
    802  1.45    bouyer 		delay(500000);
    803  1.40    bouyer 	/* clear port interrupt register */
    804  1.40    bouyer 	AHCI_WRITE(sc, AHCI_P_IS(chp->ch_channel), 0xffffffff);
    805  1.47    bouyer 	ahci_channel_start(sc, chp, flags,
    806  1.40    bouyer 	    (sc->sc_ahci_cap & AHCI_CAP_CLO) ? 1 : 0);
    807  1.40    bouyer 	return 0;
    808  1.40    bouyer }
    809  1.40    bouyer 
    810  1.29  jakllsch static void
    811   1.1    bouyer ahci_reset_channel(struct ata_channel *chp, int flags)
    812   1.1    bouyer {
    813   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
    814   1.1    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
    815  1.18    bouyer 	int i, tfd;
    816   1.1    bouyer 
    817   1.5    bouyer 	ahci_channel_stop(sc, chp, flags);
    818   1.1    bouyer 	if (sata_reset_interface(chp, sc->sc_ahcit, achp->ahcic_scontrol,
    819  1.47    bouyer 	    achp->ahcic_sstatus, flags) != SStatus_DET_DEV) {
    820  1.33  jakllsch 		printf("%s: port %d reset failed\n", AHCINAME(sc), chp->ch_channel);
    821   1.1    bouyer 		/* XXX and then ? */
    822   1.1    bouyer 	}
    823   1.1    bouyer 	if (chp->ch_queue->active_xfer) {
    824   1.1    bouyer 		chp->ch_queue->active_xfer->c_kill_xfer(chp,
    825   1.1    bouyer 		    chp->ch_queue->active_xfer, KILL_RESET);
    826   1.1    bouyer 	}
    827  1.47    bouyer 	ata_delay(500, "ahcirst", flags);
    828  1.24    bouyer 	/* clear port interrupt register */
    829  1.24    bouyer 	AHCI_WRITE(sc, AHCI_P_IS(chp->ch_channel), 0xffffffff);
    830  1.24    bouyer 	/* clear SErrors and start operations */
    831  1.40    bouyer 	ahci_channel_start(sc, chp, flags, 1);
    832  1.18    bouyer 	/* wait 31s for BSY to clear */
    833  1.24    bouyer 	for (i = 0; i <AHCI_RST_WAIT; i++) {
    834  1.18    bouyer 		tfd = AHCI_READ(sc, AHCI_P_TFD(chp->ch_channel));
    835  1.18    bouyer 		if ((((tfd & AHCI_P_TFD_ST) >> AHCI_P_TFD_ST_SHIFT)
    836  1.18    bouyer 		    & WDCS_BSY) == 0)
    837   1.8    bouyer 			break;
    838  1.47    bouyer 		ata_delay(10, "ahcid2h", flags);
    839   1.8    bouyer 	}
    840  1.24    bouyer 	if (i == AHCI_RST_WAIT)
    841  1.18    bouyer 		aprint_error("%s: BSY never cleared, TD 0x%x\n",
    842  1.18    bouyer 		    AHCINAME(sc), tfd);
    843  1.18    bouyer 	AHCIDEBUG_PRINT(("%s: BSY took %d ms\n", AHCINAME(sc), i * 10),
    844  1.18    bouyer 	    DEBUG_PROBE);
    845   1.8    bouyer 	/* clear port interrupt register */
    846   1.8    bouyer 	AHCI_WRITE(sc, AHCI_P_IS(chp->ch_channel), 0xffffffff);
    847   1.8    bouyer 
    848   1.1    bouyer 	return;
    849   1.1    bouyer }
    850   1.1    bouyer 
    851  1.29  jakllsch static int
    852   1.1    bouyer ahci_ata_addref(struct ata_drive_datas *drvp)
    853   1.1    bouyer {
    854   1.1    bouyer 	return 0;
    855   1.1    bouyer }
    856   1.1    bouyer 
    857  1.29  jakllsch static void
    858   1.1    bouyer ahci_ata_delref(struct ata_drive_datas *drvp)
    859   1.1    bouyer {
    860   1.1    bouyer 	return;
    861   1.1    bouyer }
    862   1.1    bouyer 
    863  1.29  jakllsch static void
    864   1.1    bouyer ahci_killpending(struct ata_drive_datas *drvp)
    865   1.1    bouyer {
    866   1.1    bouyer 	return;
    867   1.1    bouyer }
    868   1.1    bouyer 
    869  1.29  jakllsch static void
    870   1.1    bouyer ahci_probe_drive(struct ata_channel *chp)
    871   1.1    bouyer {
    872   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
    873   1.1    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
    874  1.27  jakllsch 	uint32_t sig;
    875   1.1    bouyer 
    876  1.18    bouyer 	/* bring interface up, accept FISs, power up and spin up device */
    877   1.1    bouyer 	AHCI_WRITE(sc, AHCI_P_CMD(chp->ch_channel),
    878  1.18    bouyer 	    AHCI_P_CMD_ICC_AC | AHCI_P_CMD_FRE |
    879  1.18    bouyer 	    AHCI_P_CMD_POD | AHCI_P_CMD_SUD);
    880   1.1    bouyer 	/* reset the PHY and bring online */
    881   1.1    bouyer 	switch (sata_reset_interface(chp, sc->sc_ahcit, achp->ahcic_scontrol,
    882  1.47    bouyer 	    achp->ahcic_sstatus, AT_WAIT)) {
    883   1.1    bouyer 	case SStatus_DET_DEV:
    884  1.24    bouyer 		tsleep(&sc, PRIBIO, "ahcidv", mstohz(500));
    885  1.40    bouyer 		if (sc->sc_ahci_cap & AHCI_CAP_SPM) {
    886  1.40    bouyer 			ahci_do_reset_drive(chp, PMP_PORT_CTL, AT_WAIT, &sig);
    887  1.40    bouyer 		} else {
    888  1.40    bouyer 			ahci_do_reset_drive(chp, 0, AT_WAIT, &sig);
    889   1.8    bouyer 		}
    890  1.40    bouyer 		sata_interpret_sig(chp, 0, sig);
    891  1.40    bouyer 		/* if we have a PMP attached, inform the controller */
    892  1.40    bouyer 		if (chp->ch_ndrives > PMP_PORT_CTL &&
    893  1.40    bouyer 		    chp->ch_drive[PMP_PORT_CTL].drive_type == ATA_DRIVET_PM) {
    894  1.40    bouyer 			AHCI_WRITE(sc, AHCI_P_CMD(chp->ch_channel),
    895  1.40    bouyer 			    AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)) |
    896  1.40    bouyer 			    AHCI_P_CMD_PMA);
    897  1.23    bouyer 		}
    898  1.23    bouyer 		/* clear port interrupt register */
    899  1.23    bouyer 		AHCI_WRITE(sc, AHCI_P_IS(chp->ch_channel), 0xffffffff);
    900  1.44      matt 
    901  1.23    bouyer 		/* and enable interrupts */
    902   1.1    bouyer 		AHCI_WRITE(sc, AHCI_P_IE(chp->ch_channel),
    903   1.1    bouyer 		    AHCI_P_IX_TFES | AHCI_P_IX_HBFS | AHCI_P_IX_IFS |
    904   1.1    bouyer 		    AHCI_P_IX_OFS | AHCI_P_IX_DPS | AHCI_P_IX_UFS |
    905  1.44      matt 		    AHCI_P_IX_PSS | AHCI_P_IX_DHRS);
    906  1.17     dillo 		/* wait 500ms before actually starting operations */
    907  1.17     dillo 		tsleep(&sc, PRIBIO, "ahciprb", mstohz(500));
    908   1.1    bouyer 		break;
    909   1.1    bouyer 
    910   1.1    bouyer 	default:
    911   1.1    bouyer 		break;
    912   1.1    bouyer 	}
    913   1.1    bouyer }
    914   1.1    bouyer 
    915  1.29  jakllsch static void
    916   1.1    bouyer ahci_setup_channel(struct ata_channel *chp)
    917   1.1    bouyer {
    918   1.1    bouyer 	return;
    919   1.1    bouyer }
    920   1.1    bouyer 
    921  1.29  jakllsch static int
    922   1.1    bouyer ahci_exec_command(struct ata_drive_datas *drvp, struct ata_command *ata_c)
    923   1.1    bouyer {
    924   1.1    bouyer 	struct ata_channel *chp = drvp->chnl_softc;
    925   1.1    bouyer 	struct ata_xfer *xfer;
    926   1.1    bouyer 	int ret;
    927   1.1    bouyer 	int s;
    928   1.1    bouyer 
    929   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
    930   1.1    bouyer 	AHCIDEBUG_PRINT(("ahci_exec_command port %d CI 0x%x\n",
    931   1.1    bouyer 	    chp->ch_channel, AHCI_READ(sc, AHCI_P_CI(chp->ch_channel))),
    932   1.1    bouyer 	    DEBUG_XFERS);
    933   1.1    bouyer 	xfer = ata_get_xfer(ata_c->flags & AT_WAIT ? ATAXF_CANSLEEP :
    934   1.1    bouyer 	    ATAXF_NOSLEEP);
    935   1.1    bouyer 	if (xfer == NULL) {
    936   1.1    bouyer 		return ATACMD_TRY_AGAIN;
    937   1.1    bouyer 	}
    938   1.1    bouyer 	if (ata_c->flags & AT_POLL)
    939   1.1    bouyer 		xfer->c_flags |= C_POLL;
    940   1.1    bouyer 	if (ata_c->flags & AT_WAIT)
    941   1.1    bouyer 		xfer->c_flags |= C_WAIT;
    942   1.1    bouyer 	xfer->c_drive = drvp->drive;
    943   1.1    bouyer 	xfer->c_databuf = ata_c->data;
    944   1.1    bouyer 	xfer->c_bcount = ata_c->bcount;
    945   1.1    bouyer 	xfer->c_cmd = ata_c;
    946   1.1    bouyer 	xfer->c_start = ahci_cmd_start;
    947   1.1    bouyer 	xfer->c_intr = ahci_cmd_complete;
    948   1.1    bouyer 	xfer->c_kill_xfer = ahci_cmd_kill_xfer;
    949   1.1    bouyer 	s = splbio();
    950   1.1    bouyer 	ata_exec_xfer(chp, xfer);
    951   1.1    bouyer #ifdef DIAGNOSTIC
    952   1.1    bouyer 	if ((ata_c->flags & AT_POLL) != 0 &&
    953   1.1    bouyer 	    (ata_c->flags & AT_DONE) == 0)
    954   1.1    bouyer 		panic("ahci_exec_command: polled command not done");
    955   1.1    bouyer #endif
    956   1.1    bouyer 	if (ata_c->flags & AT_DONE) {
    957   1.1    bouyer 		ret = ATACMD_COMPLETE;
    958   1.1    bouyer 	} else {
    959   1.1    bouyer 		if (ata_c->flags & AT_WAIT) {
    960   1.1    bouyer 			while ((ata_c->flags & AT_DONE) == 0) {
    961   1.1    bouyer 				tsleep(ata_c, PRIBIO, "ahcicmd", 0);
    962   1.1    bouyer 			}
    963   1.1    bouyer 			ret = ATACMD_COMPLETE;
    964   1.1    bouyer 		} else {
    965   1.1    bouyer 			ret = ATACMD_QUEUED;
    966   1.1    bouyer 		}
    967   1.1    bouyer 	}
    968   1.1    bouyer 	splx(s);
    969   1.1    bouyer 	return ret;
    970   1.1    bouyer }
    971   1.1    bouyer 
    972  1.29  jakllsch static void
    973   1.1    bouyer ahci_cmd_start(struct ata_channel *chp, struct ata_xfer *xfer)
    974   1.1    bouyer {
    975   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
    976   1.1    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
    977   1.1    bouyer 	struct ata_command *ata_c = xfer->c_cmd;
    978   1.1    bouyer 	int slot = 0 /* XXX slot */;
    979   1.1    bouyer 	struct ahci_cmd_tbl *cmd_tbl;
    980   1.1    bouyer 	struct ahci_cmd_header *cmd_h;
    981   1.1    bouyer 	int i;
    982   1.1    bouyer 	int channel = chp->ch_channel;
    983   1.1    bouyer 
    984  1.44      matt 	AHCIDEBUG_PRINT(("ahci_cmd_start CI 0x%x timo %d\n",
    985  1.44      matt 	    AHCI_READ(sc, AHCI_P_CI(chp->ch_channel)), ata_c->timeout),
    986  1.44      matt 	    DEBUG_XFERS);
    987   1.1    bouyer 
    988   1.1    bouyer 	cmd_tbl = achp->ahcic_cmd_tbl[slot];
    989   1.1    bouyer 	AHCIDEBUG_PRINT(("%s port %d tbl %p\n", AHCINAME(sc), chp->ch_channel,
    990   1.1    bouyer 	      cmd_tbl), DEBUG_XFERS);
    991   1.1    bouyer 
    992  1.20  jakllsch 	satafis_rhd_construct_cmd(ata_c, cmd_tbl->cmdt_cfis);
    993  1.40    bouyer 	cmd_tbl->cmdt_cfis[rhd_c] |= xfer->c_drive;
    994   1.1    bouyer 
    995   1.1    bouyer 	cmd_h = &achp->ahcic_cmdh[slot];
    996   1.1    bouyer 	AHCIDEBUG_PRINT(("%s port %d header %p\n", AHCINAME(sc),
    997   1.1    bouyer 	    chp->ch_channel, cmd_h), DEBUG_XFERS);
    998   1.1    bouyer 	if (ahci_dma_setup(chp, slot,
    999  1.31   tsutsui 	    (ata_c->flags & (AT_READ|AT_WRITE) && ata_c->bcount > 0) ?
   1000  1.31   tsutsui 	    ata_c->data : NULL,
   1001   1.1    bouyer 	    ata_c->bcount,
   1002   1.1    bouyer 	    (ata_c->flags & AT_READ) ? BUS_DMA_READ : BUS_DMA_WRITE)) {
   1003   1.1    bouyer 		ata_c->flags |= AT_DF;
   1004   1.1    bouyer 		ahci_cmd_complete(chp, xfer, slot);
   1005   1.1    bouyer 		return;
   1006   1.1    bouyer 	}
   1007   1.1    bouyer 	cmd_h->cmdh_flags = htole16(
   1008   1.1    bouyer 	    ((ata_c->flags & AT_WRITE) ? AHCI_CMDH_F_WR : 0) |
   1009  1.40    bouyer 	    RHD_FISLEN / 4 | (xfer->c_drive << AHCI_CMDH_F_PMP_SHIFT));
   1010   1.1    bouyer 	cmd_h->cmdh_prdbc = 0;
   1011   1.1    bouyer 	AHCI_CMDH_SYNC(sc, achp, slot,
   1012   1.1    bouyer 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
   1013   1.1    bouyer 
   1014   1.1    bouyer 	if (ata_c->flags & AT_POLL) {
   1015   1.1    bouyer 		/* polled command, disable interrupts */
   1016   1.1    bouyer 		AHCI_WRITE(sc, AHCI_GHC,
   1017   1.1    bouyer 		    AHCI_READ(sc, AHCI_GHC) & ~AHCI_GHC_IE);
   1018   1.1    bouyer 	}
   1019   1.1    bouyer 	chp->ch_flags |= ATACH_IRQ_WAIT;
   1020   1.5    bouyer 	chp->ch_status = 0;
   1021   1.1    bouyer 	/* start command */
   1022   1.1    bouyer 	AHCI_WRITE(sc, AHCI_P_CI(chp->ch_channel), 1 << slot);
   1023   1.1    bouyer 	/* and says we started this command */
   1024   1.1    bouyer 	achp->ahcic_cmds_active |= 1 << slot;
   1025   1.1    bouyer 
   1026   1.1    bouyer 	if ((ata_c->flags & AT_POLL) == 0) {
   1027   1.1    bouyer 		chp->ch_flags |= ATACH_IRQ_WAIT; /* wait for interrupt */
   1028   1.1    bouyer 		callout_reset(&chp->ch_callout, mstohz(ata_c->timeout),
   1029   1.1    bouyer 		    ahci_timeout, chp);
   1030   1.1    bouyer 		return;
   1031   1.1    bouyer 	}
   1032   1.1    bouyer 	/*
   1033   1.1    bouyer 	 * Polled command.
   1034   1.1    bouyer 	 */
   1035   1.1    bouyer 	for (i = 0; i < ata_c->timeout / 10; i++) {
   1036   1.1    bouyer 		if (ata_c->flags & AT_DONE)
   1037   1.1    bouyer 			break;
   1038   1.1    bouyer 		ahci_intr_port(sc, achp);
   1039   1.1    bouyer 		if (ata_c->flags & AT_WAIT)
   1040   1.1    bouyer 			tsleep(&xfer, PRIBIO, "ahcipl", mstohz(10));
   1041   1.1    bouyer 		else
   1042   1.1    bouyer 			delay(10000);
   1043   1.1    bouyer 	}
   1044   1.1    bouyer 	AHCIDEBUG_PRINT(("%s port %d poll end GHC 0x%x IS 0x%x list 0x%x%x fis 0x%x%x CMD 0x%x CI 0x%x\n", AHCINAME(sc), channel,
   1045   1.1    bouyer 	    AHCI_READ(sc, AHCI_GHC), AHCI_READ(sc, AHCI_IS),
   1046   1.1    bouyer 	    AHCI_READ(sc, AHCI_P_CLBU(channel)), AHCI_READ(sc, AHCI_P_CLB(channel)),
   1047   1.1    bouyer 	    AHCI_READ(sc, AHCI_P_FBU(channel)), AHCI_READ(sc, AHCI_P_FB(channel)),
   1048   1.1    bouyer 	    AHCI_READ(sc, AHCI_P_CMD(channel)), AHCI_READ(sc, AHCI_P_CI(channel))),
   1049   1.1    bouyer 	    DEBUG_XFERS);
   1050   1.1    bouyer 	if ((ata_c->flags & AT_DONE) == 0) {
   1051   1.1    bouyer 		ata_c->flags |= AT_TIMEOU;
   1052   1.1    bouyer 		ahci_cmd_complete(chp, xfer, slot);
   1053   1.1    bouyer 	}
   1054   1.1    bouyer 	/* reenable interrupts */
   1055   1.1    bouyer 	AHCI_WRITE(sc, AHCI_GHC, AHCI_READ(sc, AHCI_GHC) | AHCI_GHC_IE);
   1056   1.1    bouyer }
   1057   1.1    bouyer 
   1058  1.29  jakllsch static void
   1059   1.1    bouyer ahci_cmd_kill_xfer(struct ata_channel *chp, struct ata_xfer *xfer, int reason)
   1060   1.1    bouyer {
   1061   1.1    bouyer 	struct ata_command *ata_c = xfer->c_cmd;
   1062   1.1    bouyer 	AHCIDEBUG_PRINT(("ahci_cmd_kill_xfer channel %d\n", chp->ch_channel),
   1063   1.1    bouyer 	    DEBUG_FUNCS);
   1064   1.1    bouyer 
   1065   1.1    bouyer 	switch (reason) {
   1066   1.1    bouyer 	case KILL_GONE:
   1067   1.1    bouyer 		ata_c->flags |= AT_GONE;
   1068   1.1    bouyer 		break;
   1069   1.1    bouyer 	case KILL_RESET:
   1070   1.1    bouyer 		ata_c->flags |= AT_RESET;
   1071   1.1    bouyer 		break;
   1072   1.1    bouyer 	default:
   1073   1.1    bouyer 		printf("ahci_cmd_kill_xfer: unknown reason %d\n", reason);
   1074   1.1    bouyer 		panic("ahci_cmd_kill_xfer");
   1075   1.1    bouyer 	}
   1076   1.1    bouyer 	ahci_cmd_done(chp, xfer, 0 /* XXX slot */);
   1077   1.1    bouyer }
   1078   1.1    bouyer 
   1079  1.29  jakllsch static int
   1080   1.1    bouyer ahci_cmd_complete(struct ata_channel *chp, struct ata_xfer *xfer, int is)
   1081   1.1    bouyer {
   1082   1.1    bouyer 	int slot = 0; /* XXX slot */
   1083   1.1    bouyer 	struct ata_command *ata_c = xfer->c_cmd;
   1084   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
   1085  1.26  jakllsch 	struct ahci_channel *achp = (struct ahci_channel *)chp;
   1086   1.1    bouyer 
   1087   1.1    bouyer 	AHCIDEBUG_PRINT(("ahci_cmd_complete channel %d CMD 0x%x CI 0x%x\n",
   1088   1.1    bouyer 	    chp->ch_channel, AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)),
   1089   1.1    bouyer 	    AHCI_READ(sc, AHCI_P_CI(chp->ch_channel))),
   1090   1.1    bouyer 	    DEBUG_FUNCS);
   1091   1.1    bouyer 	chp->ch_flags &= ~ATACH_IRQ_WAIT;
   1092   1.1    bouyer 	if (xfer->c_flags & C_TIMEOU) {
   1093   1.1    bouyer 		ata_c->flags |= AT_TIMEOU;
   1094   1.1    bouyer 	} else
   1095   1.1    bouyer 		callout_stop(&chp->ch_callout);
   1096   1.1    bouyer 
   1097   1.1    bouyer 	chp->ch_queue->active_xfer = NULL;
   1098   1.1    bouyer 
   1099  1.40    bouyer 	if (chp->ch_drive[xfer->c_drive].drive_flags & ATA_DRIVE_WAITDRAIN) {
   1100   1.1    bouyer 		ahci_cmd_kill_xfer(chp, xfer, KILL_GONE);
   1101  1.40    bouyer 		chp->ch_drive[xfer->c_drive].drive_flags &= ~ATA_DRIVE_WAITDRAIN;
   1102   1.1    bouyer 		wakeup(&chp->ch_queue->active_xfer);
   1103   1.1    bouyer 		return 0;
   1104   1.1    bouyer 	}
   1105  1.26  jakllsch 
   1106  1.26  jakllsch 	if (chp->ch_status & WDCS_BSY) {
   1107  1.26  jakllsch 		ata_c->flags |= AT_TIMEOU;
   1108  1.26  jakllsch 	} else if (chp->ch_status & WDCS_ERR) {
   1109  1.26  jakllsch 		ata_c->r_error = chp->ch_error;
   1110  1.26  jakllsch 		ata_c->flags |= AT_ERROR;
   1111   1.1    bouyer 	}
   1112  1.26  jakllsch 
   1113  1.26  jakllsch 	if (ata_c->flags & AT_READREG)
   1114  1.26  jakllsch 		satafis_rdh_cmd_readreg(ata_c, achp->ahcic_rfis->rfis_rfis);
   1115  1.26  jakllsch 
   1116   1.1    bouyer 	ahci_cmd_done(chp, xfer, slot);
   1117   1.1    bouyer 	return 0;
   1118   1.1    bouyer }
   1119   1.1    bouyer 
   1120  1.29  jakllsch static void
   1121   1.1    bouyer ahci_cmd_done(struct ata_channel *chp, struct ata_xfer *xfer, int slot)
   1122   1.1    bouyer {
   1123   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
   1124   1.1    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
   1125   1.1    bouyer 	struct ata_command *ata_c = xfer->c_cmd;
   1126  1.25  jakllsch 	uint16_t *idwordbuf;
   1127  1.25  jakllsch 	int i;
   1128   1.1    bouyer 
   1129  1.44      matt 	AHCIDEBUG_PRINT(("ahci_cmd_done channel %d (status %#x) flags %#x/%#x\n",
   1130  1.44      matt 	    chp->ch_channel, chp->ch_status, xfer->c_flags, ata_c->flags), DEBUG_FUNCS);
   1131   1.1    bouyer 
   1132   1.1    bouyer 	/* this comamnd is not active any more */
   1133   1.1    bouyer 	achp->ahcic_cmds_active &= ~(1 << slot);
   1134   1.1    bouyer 
   1135  1.31   tsutsui 	if (ata_c->flags & (AT_READ|AT_WRITE) && ata_c->bcount > 0) {
   1136  1.44      matt 		bus_dmamap_t map = achp->ahcic_datad[slot];
   1137  1.44      matt 		bus_dmamap_sync(sc->sc_dmat, map, 0, map->dm_mapsize,
   1138   1.1    bouyer 		    (ata_c->flags & AT_READ) ? BUS_DMASYNC_POSTREAD :
   1139   1.1    bouyer 		    BUS_DMASYNC_POSTWRITE);
   1140  1.44      matt 		bus_dmamap_unload(sc->sc_dmat, map);
   1141   1.1    bouyer 	}
   1142   1.1    bouyer 
   1143   1.2      fvdl 	AHCI_CMDH_SYNC(sc, achp, slot,
   1144   1.2      fvdl 	    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
   1145   1.2      fvdl 
   1146  1.25  jakllsch 	/* ata(4) expects IDENTIFY data to be in host endianess */
   1147  1.25  jakllsch 	if (ata_c->r_command == WDCC_IDENTIFY ||
   1148  1.25  jakllsch 	    ata_c->r_command == ATAPI_IDENTIFY_DEVICE) {
   1149  1.25  jakllsch 		idwordbuf = xfer->c_databuf;
   1150  1.25  jakllsch 		for (i = 0; i < (xfer->c_bcount / sizeof(*idwordbuf)); i++) {
   1151  1.25  jakllsch 			idwordbuf[i] = le16toh(idwordbuf[i]);
   1152  1.25  jakllsch 		}
   1153  1.25  jakllsch 	}
   1154  1.25  jakllsch 
   1155   1.1    bouyer 	ata_c->flags |= AT_DONE;
   1156   1.1    bouyer 	if (achp->ahcic_cmdh[slot].cmdh_prdbc)
   1157   1.1    bouyer 		ata_c->flags |= AT_XFDONE;
   1158   1.1    bouyer 
   1159   1.1    bouyer 	ata_free_xfer(chp, xfer);
   1160   1.1    bouyer 	if (ata_c->flags & AT_WAIT)
   1161   1.1    bouyer 		wakeup(ata_c);
   1162   1.1    bouyer 	else if (ata_c->callback)
   1163   1.1    bouyer 		ata_c->callback(ata_c->callback_arg);
   1164   1.1    bouyer 	atastart(chp);
   1165   1.1    bouyer 	return;
   1166   1.1    bouyer }
   1167   1.1    bouyer 
   1168  1.29  jakllsch static int
   1169   1.1    bouyer ahci_ata_bio(struct ata_drive_datas *drvp, struct ata_bio *ata_bio)
   1170   1.1    bouyer {
   1171   1.1    bouyer 	struct ata_channel *chp = drvp->chnl_softc;
   1172   1.1    bouyer 	struct ata_xfer *xfer;
   1173   1.1    bouyer 
   1174   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
   1175   1.1    bouyer 	AHCIDEBUG_PRINT(("ahci_ata_bio port %d CI 0x%x\n",
   1176   1.1    bouyer 	    chp->ch_channel, AHCI_READ(sc, AHCI_P_CI(chp->ch_channel))),
   1177   1.1    bouyer 	    DEBUG_XFERS);
   1178   1.1    bouyer 	xfer = ata_get_xfer(ATAXF_NOSLEEP);
   1179   1.1    bouyer 	if (xfer == NULL) {
   1180   1.1    bouyer 		return ATACMD_TRY_AGAIN;
   1181   1.1    bouyer 	}
   1182   1.1    bouyer 	if (ata_bio->flags & ATA_POLL)
   1183   1.1    bouyer 		xfer->c_flags |= C_POLL;
   1184   1.1    bouyer 	xfer->c_drive = drvp->drive;
   1185   1.1    bouyer 	xfer->c_cmd = ata_bio;
   1186   1.1    bouyer 	xfer->c_databuf = ata_bio->databuf;
   1187   1.1    bouyer 	xfer->c_bcount = ata_bio->bcount;
   1188   1.1    bouyer 	xfer->c_start = ahci_bio_start;
   1189   1.1    bouyer 	xfer->c_intr = ahci_bio_complete;
   1190   1.1    bouyer 	xfer->c_kill_xfer = ahci_bio_kill_xfer;
   1191   1.1    bouyer 	ata_exec_xfer(chp, xfer);
   1192   1.1    bouyer 	return (ata_bio->flags & ATA_ITSDONE) ? ATACMD_COMPLETE : ATACMD_QUEUED;
   1193   1.1    bouyer }
   1194   1.1    bouyer 
   1195  1.29  jakllsch static void
   1196   1.1    bouyer ahci_bio_start(struct ata_channel *chp, struct ata_xfer *xfer)
   1197   1.1    bouyer {
   1198   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
   1199   1.1    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
   1200   1.1    bouyer 	struct ata_bio *ata_bio = xfer->c_cmd;
   1201   1.1    bouyer 	int slot = 0 /* XXX slot */;
   1202   1.1    bouyer 	struct ahci_cmd_tbl *cmd_tbl;
   1203   1.1    bouyer 	struct ahci_cmd_header *cmd_h;
   1204  1.20  jakllsch 	int i;
   1205   1.1    bouyer 	int channel = chp->ch_channel;
   1206   1.1    bouyer 
   1207   1.1    bouyer 	AHCIDEBUG_PRINT(("ahci_bio_start CI 0x%x\n",
   1208   1.1    bouyer 	    AHCI_READ(sc, AHCI_P_CI(chp->ch_channel))), DEBUG_XFERS);
   1209   1.1    bouyer 
   1210   1.1    bouyer 	cmd_tbl = achp->ahcic_cmd_tbl[slot];
   1211   1.1    bouyer 	AHCIDEBUG_PRINT(("%s port %d tbl %p\n", AHCINAME(sc), chp->ch_channel,
   1212   1.1    bouyer 	      cmd_tbl), DEBUG_XFERS);
   1213   1.1    bouyer 
   1214  1.20  jakllsch 	satafis_rhd_construct_bio(xfer, cmd_tbl->cmdt_cfis);
   1215  1.40    bouyer 	cmd_tbl->cmdt_cfis[rhd_c] |= xfer->c_drive;
   1216   1.1    bouyer 
   1217   1.1    bouyer 	cmd_h = &achp->ahcic_cmdh[slot];
   1218   1.1    bouyer 	AHCIDEBUG_PRINT(("%s port %d header %p\n", AHCINAME(sc),
   1219   1.1    bouyer 	    chp->ch_channel, cmd_h), DEBUG_XFERS);
   1220   1.1    bouyer 	if (ahci_dma_setup(chp, slot, ata_bio->databuf, ata_bio->bcount,
   1221   1.1    bouyer 	    (ata_bio->flags & ATA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE)) {
   1222   1.1    bouyer 		ata_bio->error = ERR_DMA;
   1223   1.1    bouyer 		ata_bio->r_error = 0;
   1224   1.1    bouyer 		ahci_bio_complete(chp, xfer, slot);
   1225   1.1    bouyer 		return;
   1226   1.1    bouyer 	}
   1227   1.1    bouyer 	cmd_h->cmdh_flags = htole16(
   1228   1.1    bouyer 	    ((ata_bio->flags & ATA_READ) ? 0 :  AHCI_CMDH_F_WR) |
   1229  1.40    bouyer 	    RHD_FISLEN / 4 | (xfer->c_drive << AHCI_CMDH_F_PMP_SHIFT));
   1230   1.1    bouyer 	cmd_h->cmdh_prdbc = 0;
   1231   1.2      fvdl 	AHCI_CMDH_SYNC(sc, achp, slot,
   1232   1.2      fvdl 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
   1233   1.1    bouyer 
   1234   1.1    bouyer 	if (xfer->c_flags & C_POLL) {
   1235   1.1    bouyer 		/* polled command, disable interrupts */
   1236   1.1    bouyer 		AHCI_WRITE(sc, AHCI_GHC,
   1237   1.1    bouyer 		    AHCI_READ(sc, AHCI_GHC) & ~AHCI_GHC_IE);
   1238   1.1    bouyer 	}
   1239   1.1    bouyer 	chp->ch_flags |= ATACH_IRQ_WAIT;
   1240   1.5    bouyer 	chp->ch_status = 0;
   1241   1.1    bouyer 	/* start command */
   1242   1.1    bouyer 	AHCI_WRITE(sc, AHCI_P_CI(chp->ch_channel), 1 << slot);
   1243   1.1    bouyer 	/* and says we started this command */
   1244   1.1    bouyer 	achp->ahcic_cmds_active |= 1 << slot;
   1245   1.1    bouyer 
   1246   1.1    bouyer 	if ((xfer->c_flags & C_POLL) == 0) {
   1247   1.1    bouyer 		chp->ch_flags |= ATACH_IRQ_WAIT; /* wait for interrupt */
   1248   1.1    bouyer 		callout_reset(&chp->ch_callout, mstohz(ATA_DELAY),
   1249   1.1    bouyer 		    ahci_timeout, chp);
   1250   1.1    bouyer 		return;
   1251   1.1    bouyer 	}
   1252   1.1    bouyer 	/*
   1253   1.1    bouyer 	 * Polled command.
   1254   1.1    bouyer 	 */
   1255  1.47    bouyer 	for (i = 0; i < ATA_DELAY * 10; i++) {
   1256   1.1    bouyer 		if (ata_bio->flags & ATA_ITSDONE)
   1257   1.1    bouyer 			break;
   1258   1.1    bouyer 		ahci_intr_port(sc, achp);
   1259  1.47    bouyer 		delay(100);
   1260   1.1    bouyer 	}
   1261   1.1    bouyer 	AHCIDEBUG_PRINT(("%s port %d poll end GHC 0x%x IS 0x%x list 0x%x%x fis 0x%x%x CMD 0x%x CI 0x%x\n", AHCINAME(sc), channel,
   1262   1.1    bouyer 	    AHCI_READ(sc, AHCI_GHC), AHCI_READ(sc, AHCI_IS),
   1263   1.1    bouyer 	    AHCI_READ(sc, AHCI_P_CLBU(channel)), AHCI_READ(sc, AHCI_P_CLB(channel)),
   1264   1.1    bouyer 	    AHCI_READ(sc, AHCI_P_FBU(channel)), AHCI_READ(sc, AHCI_P_FB(channel)),
   1265   1.1    bouyer 	    AHCI_READ(sc, AHCI_P_CMD(channel)), AHCI_READ(sc, AHCI_P_CI(channel))),
   1266   1.1    bouyer 	    DEBUG_XFERS);
   1267   1.1    bouyer 	if ((ata_bio->flags & ATA_ITSDONE) == 0) {
   1268   1.1    bouyer 		ata_bio->error = TIMEOUT;
   1269   1.1    bouyer 		ahci_bio_complete(chp, xfer, slot);
   1270   1.1    bouyer 	}
   1271   1.1    bouyer 	/* reenable interrupts */
   1272   1.1    bouyer 	AHCI_WRITE(sc, AHCI_GHC, AHCI_READ(sc, AHCI_GHC) | AHCI_GHC_IE);
   1273   1.1    bouyer }
   1274   1.1    bouyer 
   1275  1.29  jakllsch static void
   1276   1.1    bouyer ahci_bio_kill_xfer(struct ata_channel *chp, struct ata_xfer *xfer, int reason)
   1277   1.1    bouyer {
   1278   1.1    bouyer 	int slot = 0;  /* XXX slot */
   1279   1.1    bouyer 	int drive = xfer->c_drive;
   1280   1.1    bouyer 	struct ata_bio *ata_bio = xfer->c_cmd;
   1281   1.1    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
   1282   1.1    bouyer 	AHCIDEBUG_PRINT(("ahci_bio_kill_xfer channel %d\n", chp->ch_channel),
   1283   1.1    bouyer 	    DEBUG_FUNCS);
   1284   1.1    bouyer 
   1285   1.1    bouyer 	achp->ahcic_cmds_active &= ~(1 << slot);
   1286   1.1    bouyer 	ata_free_xfer(chp, xfer);
   1287   1.1    bouyer 	ata_bio->flags |= ATA_ITSDONE;
   1288   1.1    bouyer 	switch (reason) {
   1289   1.1    bouyer 	case KILL_GONE:
   1290   1.1    bouyer 		ata_bio->error = ERR_NODEV;
   1291   1.1    bouyer 		break;
   1292   1.1    bouyer 	case KILL_RESET:
   1293   1.1    bouyer 		ata_bio->error = ERR_RESET;
   1294   1.1    bouyer 		break;
   1295   1.1    bouyer 	default:
   1296   1.1    bouyer 		printf("ahci_bio_kill_xfer: unknown reason %d\n", reason);
   1297   1.1    bouyer 		panic("ahci_bio_kill_xfer");
   1298   1.1    bouyer 	}
   1299   1.1    bouyer 	ata_bio->r_error = WDCE_ABRT;
   1300   1.1    bouyer 	(*chp->ch_drive[drive].drv_done)(chp->ch_drive[drive].drv_softc);
   1301   1.1    bouyer }
   1302   1.1    bouyer 
   1303  1.29  jakllsch static int
   1304   1.1    bouyer ahci_bio_complete(struct ata_channel *chp, struct ata_xfer *xfer, int is)
   1305   1.1    bouyer {
   1306   1.1    bouyer 	int slot = 0; /* XXX slot */
   1307   1.1    bouyer 	struct ata_bio *ata_bio = xfer->c_cmd;
   1308   1.1    bouyer 	int drive = xfer->c_drive;
   1309   1.1    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
   1310   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
   1311   1.1    bouyer 
   1312   1.1    bouyer 	AHCIDEBUG_PRINT(("ahci_bio_complete channel %d\n", chp->ch_channel),
   1313   1.1    bouyer 	    DEBUG_FUNCS);
   1314   1.1    bouyer 
   1315   1.1    bouyer 	achp->ahcic_cmds_active &= ~(1 << slot);
   1316   1.1    bouyer 	chp->ch_flags &= ~ATACH_IRQ_WAIT;
   1317   1.5    bouyer 	if (xfer->c_flags & C_TIMEOU) {
   1318   1.5    bouyer 		ata_bio->error = TIMEOUT;
   1319   1.5    bouyer 	} else {
   1320   1.5    bouyer 		callout_stop(&chp->ch_callout);
   1321  1.19    bouyer 		ata_bio->error = NOERROR;
   1322   1.5    bouyer 	}
   1323   1.1    bouyer 
   1324   1.1    bouyer 	chp->ch_queue->active_xfer = NULL;
   1325   1.1    bouyer 	bus_dmamap_sync(sc->sc_dmat, achp->ahcic_datad[slot], 0,
   1326   1.1    bouyer 	    achp->ahcic_datad[slot]->dm_mapsize,
   1327   1.1    bouyer 	    (ata_bio->flags & ATA_READ) ? BUS_DMASYNC_POSTREAD :
   1328   1.1    bouyer 	    BUS_DMASYNC_POSTWRITE);
   1329   1.1    bouyer 	bus_dmamap_unload(sc->sc_dmat, achp->ahcic_datad[slot]);
   1330   1.1    bouyer 
   1331  1.40    bouyer 	if (chp->ch_drive[xfer->c_drive].drive_flags & ATA_DRIVE_WAITDRAIN) {
   1332   1.1    bouyer 		ahci_bio_kill_xfer(chp, xfer, KILL_GONE);
   1333  1.40    bouyer 		chp->ch_drive[xfer->c_drive].drive_flags &= ~ATA_DRIVE_WAITDRAIN;
   1334   1.1    bouyer 		wakeup(&chp->ch_queue->active_xfer);
   1335   1.1    bouyer 		return 0;
   1336   1.1    bouyer 	}
   1337   1.1    bouyer 	ata_free_xfer(chp, xfer);
   1338   1.1    bouyer 	ata_bio->flags |= ATA_ITSDONE;
   1339   1.1    bouyer 	if (chp->ch_status & WDCS_DWF) {
   1340   1.1    bouyer 		ata_bio->error = ERR_DF;
   1341   1.1    bouyer 	} else if (chp->ch_status & WDCS_ERR) {
   1342   1.1    bouyer 		ata_bio->error = ERROR;
   1343   1.1    bouyer 		ata_bio->r_error = chp->ch_error;
   1344   1.1    bouyer 	} else if (chp->ch_status & WDCS_CORR)
   1345   1.1    bouyer 		ata_bio->flags |= ATA_CORR;
   1346   1.1    bouyer 
   1347   1.1    bouyer 	AHCI_CMDH_SYNC(sc, achp, slot,
   1348   1.1    bouyer 	    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
   1349   1.1    bouyer 	AHCIDEBUG_PRINT(("ahci_bio_complete bcount %ld",
   1350   1.1    bouyer 	    ata_bio->bcount), DEBUG_XFERS);
   1351  1.19    bouyer 	/*
   1352  1.19    bouyer 	 * if it was a write, complete data buffer may have been transfered
   1353  1.19    bouyer 	 * before error detection; in this case don't use cmdh_prdbc
   1354  1.19    bouyer 	 * as it won't reflect what was written to media. Assume nothing
   1355  1.19    bouyer 	 * was transfered and leave bcount as-is.
   1356  1.19    bouyer 	 */
   1357  1.19    bouyer 	if ((ata_bio->flags & ATA_READ) || ata_bio->error == NOERROR)
   1358  1.19    bouyer 		ata_bio->bcount -= le32toh(achp->ahcic_cmdh[slot].cmdh_prdbc);
   1359   1.1    bouyer 	AHCIDEBUG_PRINT((" now %ld\n", ata_bio->bcount), DEBUG_XFERS);
   1360   1.1    bouyer 	(*chp->ch_drive[drive].drv_done)(chp->ch_drive[drive].drv_softc);
   1361   1.1    bouyer 	atastart(chp);
   1362   1.1    bouyer 	return 0;
   1363   1.1    bouyer }
   1364   1.1    bouyer 
   1365  1.29  jakllsch static void
   1366   1.5    bouyer ahci_channel_stop(struct ahci_softc *sc, struct ata_channel *chp, int flags)
   1367   1.5    bouyer {
   1368   1.5    bouyer 	int i;
   1369   1.5    bouyer 	/* stop channel */
   1370   1.5    bouyer 	AHCI_WRITE(sc, AHCI_P_CMD(chp->ch_channel),
   1371   1.5    bouyer 	    AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)) & ~AHCI_P_CMD_ST);
   1372   1.5    bouyer 	/* wait 1s for channel to stop */
   1373   1.5    bouyer 	for (i = 0; i <100; i++) {
   1374   1.5    bouyer 		if ((AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)) & AHCI_P_CMD_CR)
   1375   1.5    bouyer 		    == 0)
   1376   1.5    bouyer 			break;
   1377   1.5    bouyer 		if (flags & AT_WAIT)
   1378  1.40    bouyer 			tsleep(&sc, PRIBIO, "ahcistop", mstohz(10));
   1379   1.5    bouyer 		else
   1380   1.5    bouyer 			delay(10000);
   1381   1.5    bouyer 	}
   1382   1.5    bouyer 	if (AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)) & AHCI_P_CMD_CR) {
   1383   1.5    bouyer 		printf("%s: channel wouldn't stop\n", AHCINAME(sc));
   1384   1.5    bouyer 		/* XXX controller reset ? */
   1385   1.5    bouyer 		return;
   1386   1.5    bouyer 	}
   1387  1.51  jmcneill 
   1388  1.51  jmcneill 	if (sc->sc_channel_stop)
   1389  1.51  jmcneill 		sc->sc_channel_stop(sc, chp);
   1390   1.5    bouyer }
   1391   1.5    bouyer 
   1392  1.29  jakllsch static void
   1393  1.40    bouyer ahci_channel_start(struct ahci_softc *sc, struct ata_channel *chp,
   1394  1.40    bouyer     int flags, int clo)
   1395   1.1    bouyer {
   1396  1.40    bouyer 	int i;
   1397  1.40    bouyer 	uint32_t p_cmd;
   1398   1.1    bouyer 	/* clear error */
   1399  1.18    bouyer 	AHCI_WRITE(sc, AHCI_P_SERR(chp->ch_channel),
   1400  1.18    bouyer 	    AHCI_READ(sc, AHCI_P_SERR(chp->ch_channel)));
   1401   1.1    bouyer 
   1402  1.40    bouyer 	if (clo) {
   1403  1.40    bouyer 		/* issue command list override */
   1404  1.40    bouyer 		KASSERT(sc->sc_ahci_cap & AHCI_CAP_CLO);
   1405  1.40    bouyer 		AHCI_WRITE(sc, AHCI_P_CMD(chp->ch_channel),
   1406  1.40    bouyer 		    AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)) | AHCI_P_CMD_CLO);
   1407  1.40    bouyer 		/* wait 1s for AHCI_CAP_CLO to clear */
   1408  1.40    bouyer 		for (i = 0; i <100; i++) {
   1409  1.40    bouyer 			if ((AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)) &
   1410  1.40    bouyer 			    AHCI_P_CMD_CLO) == 0)
   1411  1.40    bouyer 				break;
   1412  1.40    bouyer 			if (flags & AT_WAIT)
   1413  1.40    bouyer 				tsleep(&sc, PRIBIO, "ahciclo", mstohz(10));
   1414  1.40    bouyer 			else
   1415  1.40    bouyer 				delay(10000);
   1416  1.40    bouyer 		}
   1417  1.40    bouyer 		if (AHCI_READ(sc, AHCI_P_CMD(chp->ch_channel)) & AHCI_P_CMD_CLO) {
   1418  1.40    bouyer 			printf("%s: channel wouldn't CLO\n", AHCINAME(sc));
   1419  1.40    bouyer 			/* XXX controller reset ? */
   1420  1.40    bouyer 			return;
   1421  1.40    bouyer 		}
   1422  1.40    bouyer 	}
   1423  1.51  jmcneill 
   1424  1.51  jmcneill 	if (sc->sc_channel_start)
   1425  1.51  jmcneill 		sc->sc_channel_start(sc, chp);
   1426  1.51  jmcneill 
   1427   1.1    bouyer 	/* and start controller */
   1428  1.40    bouyer 	p_cmd = AHCI_P_CMD_ICC_AC | AHCI_P_CMD_POD | AHCI_P_CMD_SUD |
   1429  1.40    bouyer 	    AHCI_P_CMD_FRE | AHCI_P_CMD_ST;
   1430  1.40    bouyer 	if (chp->ch_ndrives > PMP_PORT_CTL &&
   1431  1.40    bouyer 	    chp->ch_drive[PMP_PORT_CTL].drive_type == ATA_DRIVET_PM) {
   1432  1.40    bouyer 		p_cmd |= AHCI_P_CMD_PMA;
   1433  1.40    bouyer 	}
   1434  1.40    bouyer 	AHCI_WRITE(sc, AHCI_P_CMD(chp->ch_channel), p_cmd);
   1435   1.1    bouyer }
   1436   1.1    bouyer 
   1437  1.29  jakllsch static void
   1438   1.1    bouyer ahci_timeout(void *v)
   1439   1.1    bouyer {
   1440   1.1    bouyer 	struct ata_channel *chp = (struct ata_channel *)v;
   1441   1.1    bouyer 	struct ata_xfer *xfer = chp->ch_queue->active_xfer;
   1442  1.44      matt #ifdef AHCI_DEBUG
   1443  1.44      matt 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
   1444  1.44      matt #endif
   1445   1.1    bouyer 	int s = splbio();
   1446  1.51  jmcneill 	AHCIDEBUG_PRINT(("ahci_timeout xfer %p intr %#x ghc %08x is %08x\n", xfer, AHCI_READ(sc, AHCI_P_IS(chp->ch_channel)), AHCI_READ(sc, AHCI_GHC), AHCI_READ(sc, AHCI_IS)), DEBUG_INTR);
   1447  1.44      matt 
   1448   1.1    bouyer 	if ((chp->ch_flags & ATACH_IRQ_WAIT) != 0) {
   1449   1.1    bouyer 		xfer->c_flags |= C_TIMEOU;
   1450   1.1    bouyer 		xfer->c_intr(chp, xfer, 0);
   1451   1.1    bouyer 	}
   1452   1.1    bouyer 	splx(s);
   1453   1.1    bouyer }
   1454   1.1    bouyer 
   1455  1.29  jakllsch static int
   1456   1.1    bouyer ahci_dma_setup(struct ata_channel *chp, int slot, void *data,
   1457   1.1    bouyer     size_t count, int op)
   1458   1.1    bouyer {
   1459   1.1    bouyer 	int error, seg;
   1460   1.1    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
   1461   1.1    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
   1462   1.1    bouyer 	struct ahci_cmd_tbl *cmd_tbl;
   1463   1.1    bouyer 	struct ahci_cmd_header *cmd_h;
   1464   1.1    bouyer 
   1465   1.1    bouyer 	cmd_h = &achp->ahcic_cmdh[slot];
   1466   1.1    bouyer 	cmd_tbl = achp->ahcic_cmd_tbl[slot];
   1467   1.1    bouyer 
   1468   1.1    bouyer 	if (data == NULL) {
   1469   1.1    bouyer 		cmd_h->cmdh_prdtl = 0;
   1470   1.1    bouyer 		goto end;
   1471   1.1    bouyer 	}
   1472   1.1    bouyer 
   1473   1.1    bouyer 	error = bus_dmamap_load(sc->sc_dmat, achp->ahcic_datad[slot],
   1474   1.1    bouyer 	    data, count, NULL,
   1475   1.1    bouyer 	    BUS_DMA_NOWAIT | BUS_DMA_STREAMING | op);
   1476   1.1    bouyer 	if (error) {
   1477   1.1    bouyer 		printf("%s port %d: failed to load xfer: %d\n",
   1478   1.1    bouyer 		    AHCINAME(sc), chp->ch_channel, error);
   1479   1.1    bouyer 		return error;
   1480   1.1    bouyer 	}
   1481   1.1    bouyer 	bus_dmamap_sync(sc->sc_dmat, achp->ahcic_datad[slot], 0,
   1482   1.1    bouyer 	    achp->ahcic_datad[slot]->dm_mapsize,
   1483   1.1    bouyer 	    (op == BUS_DMA_READ) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
   1484   1.1    bouyer 	for (seg = 0; seg <  achp->ahcic_datad[slot]->dm_nsegs; seg++) {
   1485  1.28  jakllsch 		cmd_tbl->cmdt_prd[seg].prd_dba = htole64(
   1486   1.1    bouyer 		     achp->ahcic_datad[slot]->dm_segs[seg].ds_addr);
   1487   1.1    bouyer 		cmd_tbl->cmdt_prd[seg].prd_dbc = htole32(
   1488   1.1    bouyer 		    achp->ahcic_datad[slot]->dm_segs[seg].ds_len - 1);
   1489   1.1    bouyer 	}
   1490   1.1    bouyer 	cmd_tbl->cmdt_prd[seg - 1].prd_dbc |= htole32(AHCI_PRD_DBC_IPC);
   1491   1.1    bouyer 	cmd_h->cmdh_prdtl = htole16(achp->ahcic_datad[slot]->dm_nsegs);
   1492   1.1    bouyer end:
   1493   1.1    bouyer 	AHCI_CMDTBL_SYNC(sc, achp, slot, BUS_DMASYNC_PREWRITE);
   1494   1.1    bouyer 	return 0;
   1495   1.1    bouyer }
   1496   1.8    bouyer 
   1497   1.8    bouyer #if NATAPIBUS > 0
   1498  1.29  jakllsch static void
   1499   1.8    bouyer ahci_atapibus_attach(struct atabus_softc * ata_sc)
   1500   1.8    bouyer {
   1501   1.8    bouyer 	struct ata_channel *chp = ata_sc->sc_chan;
   1502   1.8    bouyer 	struct atac_softc *atac = chp->ch_atac;
   1503   1.8    bouyer 	struct scsipi_adapter *adapt = &atac->atac_atapi_adapter._generic;
   1504   1.8    bouyer 	struct scsipi_channel *chan = &chp->ch_atapi_channel;
   1505   1.8    bouyer 	/*
   1506   1.8    bouyer 	 * Fill in the scsipi_adapter.
   1507   1.8    bouyer 	 */
   1508  1.13      cube 	adapt->adapt_dev = atac->atac_dev;
   1509   1.8    bouyer 	adapt->adapt_nchannels = atac->atac_nchannels;
   1510   1.8    bouyer 	adapt->adapt_request = ahci_atapi_scsipi_request;
   1511   1.8    bouyer 	adapt->adapt_minphys = ahci_atapi_minphys;
   1512   1.8    bouyer 	atac->atac_atapi_adapter.atapi_probe_device = ahci_atapi_probe_device;
   1513   1.8    bouyer 
   1514   1.8    bouyer 	/*
   1515   1.8    bouyer 	 * Fill in the scsipi_channel.
   1516   1.8    bouyer 	 */
   1517   1.8    bouyer 	memset(chan, 0, sizeof(*chan));
   1518   1.8    bouyer 	chan->chan_adapter = adapt;
   1519   1.8    bouyer 	chan->chan_bustype = &ahci_atapi_bustype;
   1520   1.8    bouyer 	chan->chan_channel = chp->ch_channel;
   1521   1.8    bouyer 	chan->chan_flags = SCSIPI_CHAN_OPENINGS;
   1522   1.8    bouyer 	chan->chan_openings = 1;
   1523   1.8    bouyer 	chan->chan_max_periph = 1;
   1524   1.8    bouyer 	chan->chan_ntargets = 1;
   1525   1.8    bouyer 	chan->chan_nluns = 1;
   1526  1.13      cube 	chp->atapibus = config_found_ia(ata_sc->sc_dev, "atapi", chan,
   1527   1.8    bouyer 		atapiprint);
   1528   1.8    bouyer }
   1529   1.8    bouyer 
   1530  1.29  jakllsch static void
   1531   1.8    bouyer ahci_atapi_minphys(struct buf *bp)
   1532   1.8    bouyer {
   1533   1.8    bouyer 	if (bp->b_bcount > MAXPHYS)
   1534   1.8    bouyer 		bp->b_bcount = MAXPHYS;
   1535   1.8    bouyer 	minphys(bp);
   1536   1.8    bouyer }
   1537   1.8    bouyer 
   1538   1.8    bouyer /*
   1539   1.8    bouyer  * Kill off all pending xfers for a periph.
   1540   1.8    bouyer  *
   1541   1.8    bouyer  * Must be called at splbio().
   1542   1.8    bouyer  */
   1543  1.29  jakllsch static void
   1544   1.8    bouyer ahci_atapi_kill_pending(struct scsipi_periph *periph)
   1545   1.8    bouyer {
   1546   1.8    bouyer 	struct atac_softc *atac =
   1547  1.13      cube 	    device_private(periph->periph_channel->chan_adapter->adapt_dev);
   1548   1.8    bouyer 	struct ata_channel *chp =
   1549   1.8    bouyer 	    atac->atac_channels[periph->periph_channel->chan_channel];
   1550   1.8    bouyer 
   1551   1.8    bouyer 	ata_kill_pending(&chp->ch_drive[periph->periph_target]);
   1552   1.8    bouyer }
   1553   1.8    bouyer 
   1554  1.29  jakllsch static void
   1555   1.8    bouyer ahci_atapi_scsipi_request(struct scsipi_channel *chan,
   1556   1.8    bouyer     scsipi_adapter_req_t req, void *arg)
   1557   1.8    bouyer {
   1558   1.8    bouyer 	struct scsipi_adapter *adapt = chan->chan_adapter;
   1559   1.8    bouyer 	struct scsipi_periph *periph;
   1560   1.8    bouyer 	struct scsipi_xfer *sc_xfer;
   1561  1.13      cube 	struct ahci_softc *sc = device_private(adapt->adapt_dev);
   1562   1.8    bouyer 	struct atac_softc *atac = &sc->sc_atac;
   1563   1.8    bouyer 	struct ata_xfer *xfer;
   1564   1.8    bouyer 	int channel = chan->chan_channel;
   1565   1.8    bouyer 	int drive, s;
   1566   1.8    bouyer 
   1567   1.8    bouyer 	switch (req) {
   1568   1.8    bouyer 	case ADAPTER_REQ_RUN_XFER:
   1569   1.8    bouyer 		sc_xfer = arg;
   1570   1.8    bouyer 		periph = sc_xfer->xs_periph;
   1571   1.8    bouyer 		drive = periph->periph_target;
   1572  1.13      cube 		if (!device_is_active(atac->atac_dev)) {
   1573   1.8    bouyer 			sc_xfer->error = XS_DRIVER_STUFFUP;
   1574   1.8    bouyer 			scsipi_done(sc_xfer);
   1575   1.8    bouyer 			return;
   1576   1.8    bouyer 		}
   1577   1.8    bouyer 		xfer = ata_get_xfer(ATAXF_NOSLEEP);
   1578   1.8    bouyer 		if (xfer == NULL) {
   1579   1.8    bouyer 			sc_xfer->error = XS_RESOURCE_SHORTAGE;
   1580   1.8    bouyer 			scsipi_done(sc_xfer);
   1581   1.8    bouyer 			return;
   1582   1.8    bouyer 		}
   1583   1.8    bouyer 
   1584   1.8    bouyer 		if (sc_xfer->xs_control & XS_CTL_POLL)
   1585   1.8    bouyer 			xfer->c_flags |= C_POLL;
   1586   1.8    bouyer 		xfer->c_drive = drive;
   1587   1.8    bouyer 		xfer->c_flags |= C_ATAPI;
   1588   1.8    bouyer 		xfer->c_cmd = sc_xfer;
   1589   1.8    bouyer 		xfer->c_databuf = sc_xfer->data;
   1590   1.8    bouyer 		xfer->c_bcount = sc_xfer->datalen;
   1591   1.8    bouyer 		xfer->c_start = ahci_atapi_start;
   1592   1.8    bouyer 		xfer->c_intr = ahci_atapi_complete;
   1593   1.8    bouyer 		xfer->c_kill_xfer = ahci_atapi_kill_xfer;
   1594   1.8    bouyer 		xfer->c_dscpoll = 0;
   1595   1.8    bouyer 		s = splbio();
   1596   1.8    bouyer 		ata_exec_xfer(atac->atac_channels[channel], xfer);
   1597   1.8    bouyer #ifdef DIAGNOSTIC
   1598   1.8    bouyer 		if ((sc_xfer->xs_control & XS_CTL_POLL) != 0 &&
   1599   1.8    bouyer 		    (sc_xfer->xs_status & XS_STS_DONE) == 0)
   1600   1.8    bouyer 			panic("ahci_atapi_scsipi_request: polled command "
   1601   1.8    bouyer 			    "not done");
   1602   1.8    bouyer #endif
   1603   1.8    bouyer 		splx(s);
   1604   1.8    bouyer 		return;
   1605   1.8    bouyer 	default:
   1606   1.8    bouyer 		/* Not supported, nothing to do. */
   1607   1.8    bouyer 		;
   1608   1.8    bouyer 	}
   1609   1.8    bouyer }
   1610   1.8    bouyer 
   1611  1.29  jakllsch static void
   1612   1.8    bouyer ahci_atapi_start(struct ata_channel *chp, struct ata_xfer *xfer)
   1613   1.8    bouyer {
   1614   1.8    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
   1615   1.8    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
   1616   1.8    bouyer 	struct scsipi_xfer *sc_xfer = xfer->c_cmd;
   1617   1.8    bouyer 	int slot = 0 /* XXX slot */;
   1618   1.8    bouyer 	struct ahci_cmd_tbl *cmd_tbl;
   1619   1.8    bouyer 	struct ahci_cmd_header *cmd_h;
   1620   1.8    bouyer 	int i;
   1621   1.8    bouyer 	int channel = chp->ch_channel;
   1622   1.8    bouyer 
   1623   1.8    bouyer 	AHCIDEBUG_PRINT(("ahci_atapi_start CI 0x%x\n",
   1624   1.8    bouyer 	    AHCI_READ(sc, AHCI_P_CI(chp->ch_channel))), DEBUG_XFERS);
   1625   1.8    bouyer 
   1626   1.8    bouyer 	cmd_tbl = achp->ahcic_cmd_tbl[slot];
   1627   1.8    bouyer 	AHCIDEBUG_PRINT(("%s port %d tbl %p\n", AHCINAME(sc), chp->ch_channel,
   1628   1.8    bouyer 	      cmd_tbl), DEBUG_XFERS);
   1629   1.8    bouyer 
   1630  1.20  jakllsch 	satafis_rhd_construct_atapi(xfer, cmd_tbl->cmdt_cfis);
   1631  1.40    bouyer 	cmd_tbl->cmdt_cfis[rhd_c] |= xfer->c_drive;
   1632   1.8    bouyer 	memset(&cmd_tbl->cmdt_acmd, 0, sizeof(cmd_tbl->cmdt_acmd));
   1633   1.8    bouyer 	memcpy(cmd_tbl->cmdt_acmd, sc_xfer->cmd, sc_xfer->cmdlen);
   1634   1.8    bouyer 
   1635   1.8    bouyer 	cmd_h = &achp->ahcic_cmdh[slot];
   1636   1.8    bouyer 	AHCIDEBUG_PRINT(("%s port %d header %p\n", AHCINAME(sc),
   1637   1.8    bouyer 	    chp->ch_channel, cmd_h), DEBUG_XFERS);
   1638   1.8    bouyer 	if (ahci_dma_setup(chp, slot, sc_xfer->datalen ? sc_xfer->data : NULL,
   1639   1.8    bouyer 	    sc_xfer->datalen,
   1640   1.8    bouyer 	    (sc_xfer->xs_control & XS_CTL_DATA_IN) ?
   1641   1.8    bouyer 	    BUS_DMA_READ : BUS_DMA_WRITE)) {
   1642   1.8    bouyer 		sc_xfer->error = XS_DRIVER_STUFFUP;
   1643   1.8    bouyer 		ahci_atapi_complete(chp, xfer, slot);
   1644   1.8    bouyer 		return;
   1645   1.8    bouyer 	}
   1646   1.8    bouyer 	cmd_h->cmdh_flags = htole16(
   1647   1.8    bouyer 	    ((sc_xfer->xs_control & XS_CTL_DATA_OUT) ? AHCI_CMDH_F_WR : 0) |
   1648  1.40    bouyer 	    RHD_FISLEN / 4 | AHCI_CMDH_F_A |
   1649  1.40    bouyer 	    (xfer->c_drive << AHCI_CMDH_F_PMP_SHIFT));
   1650   1.8    bouyer 	cmd_h->cmdh_prdbc = 0;
   1651   1.8    bouyer 	AHCI_CMDH_SYNC(sc, achp, slot,
   1652   1.8    bouyer 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
   1653   1.8    bouyer 
   1654   1.8    bouyer 	if (xfer->c_flags & C_POLL) {
   1655   1.8    bouyer 		/* polled command, disable interrupts */
   1656   1.8    bouyer 		AHCI_WRITE(sc, AHCI_GHC,
   1657   1.8    bouyer 		    AHCI_READ(sc, AHCI_GHC) & ~AHCI_GHC_IE);
   1658   1.8    bouyer 	}
   1659   1.8    bouyer 	chp->ch_flags |= ATACH_IRQ_WAIT;
   1660   1.8    bouyer 	chp->ch_status = 0;
   1661   1.8    bouyer 	/* start command */
   1662   1.8    bouyer 	AHCI_WRITE(sc, AHCI_P_CI(chp->ch_channel), 1 << slot);
   1663   1.8    bouyer 	/* and says we started this command */
   1664   1.8    bouyer 	achp->ahcic_cmds_active |= 1 << slot;
   1665   1.8    bouyer 
   1666   1.8    bouyer 	if ((xfer->c_flags & C_POLL) == 0) {
   1667   1.8    bouyer 		chp->ch_flags |= ATACH_IRQ_WAIT; /* wait for interrupt */
   1668   1.8    bouyer 		callout_reset(&chp->ch_callout, mstohz(sc_xfer->timeout),
   1669   1.8    bouyer 		    ahci_timeout, chp);
   1670   1.8    bouyer 		return;
   1671   1.8    bouyer 	}
   1672   1.8    bouyer 	/*
   1673   1.8    bouyer 	 * Polled command.
   1674   1.8    bouyer 	 */
   1675   1.8    bouyer 	for (i = 0; i < ATA_DELAY / 10; i++) {
   1676   1.8    bouyer 		if (sc_xfer->xs_status & XS_STS_DONE)
   1677   1.8    bouyer 			break;
   1678   1.8    bouyer 		ahci_intr_port(sc, achp);
   1679   1.8    bouyer 		delay(10000);
   1680   1.8    bouyer 	}
   1681   1.8    bouyer 	AHCIDEBUG_PRINT(("%s port %d poll end GHC 0x%x IS 0x%x list 0x%x%x fis 0x%x%x CMD 0x%x CI 0x%x\n", AHCINAME(sc), channel,
   1682   1.8    bouyer 	    AHCI_READ(sc, AHCI_GHC), AHCI_READ(sc, AHCI_IS),
   1683   1.8    bouyer 	    AHCI_READ(sc, AHCI_P_CLBU(channel)), AHCI_READ(sc, AHCI_P_CLB(channel)),
   1684   1.8    bouyer 	    AHCI_READ(sc, AHCI_P_FBU(channel)), AHCI_READ(sc, AHCI_P_FB(channel)),
   1685   1.8    bouyer 	    AHCI_READ(sc, AHCI_P_CMD(channel)), AHCI_READ(sc, AHCI_P_CI(channel))),
   1686   1.8    bouyer 	    DEBUG_XFERS);
   1687   1.8    bouyer 	if ((sc_xfer->xs_status & XS_STS_DONE) == 0) {
   1688   1.8    bouyer 		sc_xfer->error = XS_TIMEOUT;
   1689   1.8    bouyer 		ahci_atapi_complete(chp, xfer, slot);
   1690   1.8    bouyer 	}
   1691   1.8    bouyer 	/* reenable interrupts */
   1692   1.8    bouyer 	AHCI_WRITE(sc, AHCI_GHC, AHCI_READ(sc, AHCI_GHC) | AHCI_GHC_IE);
   1693   1.8    bouyer }
   1694   1.8    bouyer 
   1695  1.29  jakllsch static int
   1696   1.8    bouyer ahci_atapi_complete(struct ata_channel *chp, struct ata_xfer *xfer, int irq)
   1697   1.8    bouyer {
   1698   1.8    bouyer 	int slot = 0; /* XXX slot */
   1699   1.8    bouyer 	struct scsipi_xfer *sc_xfer = xfer->c_cmd;
   1700   1.8    bouyer 	int drive = xfer->c_drive;
   1701   1.8    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
   1702   1.8    bouyer 	struct ahci_softc *sc = (struct ahci_softc *)chp->ch_atac;
   1703   1.8    bouyer 
   1704   1.8    bouyer 	AHCIDEBUG_PRINT(("ahci_atapi_complete channel %d\n", chp->ch_channel),
   1705   1.8    bouyer 	    DEBUG_FUNCS);
   1706   1.8    bouyer 
   1707   1.8    bouyer 	achp->ahcic_cmds_active &= ~(1 << slot);
   1708   1.8    bouyer 	chp->ch_flags &= ~ATACH_IRQ_WAIT;
   1709   1.8    bouyer 	if (xfer->c_flags & C_TIMEOU) {
   1710   1.8    bouyer 		sc_xfer->error = XS_TIMEOUT;
   1711   1.8    bouyer 	} else {
   1712   1.8    bouyer 		callout_stop(&chp->ch_callout);
   1713   1.8    bouyer 		sc_xfer->error = 0;
   1714   1.8    bouyer 	}
   1715   1.8    bouyer 
   1716   1.8    bouyer 	chp->ch_queue->active_xfer = NULL;
   1717  1.55  jakllsch 	if (xfer->c_bcount > 0) {
   1718  1.55  jakllsch 		bus_dmamap_sync(sc->sc_dmat, achp->ahcic_datad[slot], 0,
   1719  1.55  jakllsch 		    achp->ahcic_datad[slot]->dm_mapsize,
   1720  1.55  jakllsch 		    (sc_xfer->xs_control & XS_CTL_DATA_IN) ?
   1721  1.55  jakllsch 		    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
   1722  1.55  jakllsch 		bus_dmamap_unload(sc->sc_dmat, achp->ahcic_datad[slot]);
   1723  1.55  jakllsch 	}
   1724   1.8    bouyer 
   1725  1.40    bouyer 	if (chp->ch_drive[drive].drive_flags & ATA_DRIVE_WAITDRAIN) {
   1726   1.8    bouyer 		ahci_atapi_kill_xfer(chp, xfer, KILL_GONE);
   1727  1.40    bouyer 		chp->ch_drive[drive].drive_flags &= ~ATA_DRIVE_WAITDRAIN;
   1728   1.8    bouyer 		wakeup(&chp->ch_queue->active_xfer);
   1729   1.8    bouyer 		return 0;
   1730   1.8    bouyer 	}
   1731   1.8    bouyer 	ata_free_xfer(chp, xfer);
   1732   1.8    bouyer 
   1733   1.8    bouyer 	AHCI_CMDH_SYNC(sc, achp, slot,
   1734   1.8    bouyer 	    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
   1735   1.8    bouyer 	sc_xfer->resid = sc_xfer->datalen;
   1736   1.8    bouyer 	sc_xfer->resid -= le32toh(achp->ahcic_cmdh[slot].cmdh_prdbc);
   1737   1.8    bouyer 	AHCIDEBUG_PRINT(("ahci_atapi_complete datalen %d resid %d\n",
   1738   1.8    bouyer 	    sc_xfer->datalen, sc_xfer->resid), DEBUG_XFERS);
   1739  1.16    bouyer 	if (chp->ch_status & WDCS_ERR &&
   1740  1.16    bouyer 	    ((sc_xfer->xs_control & XS_CTL_REQSENSE) == 0 ||
   1741  1.16    bouyer 	    sc_xfer->resid == sc_xfer->datalen)) {
   1742  1.16    bouyer 		sc_xfer->error = XS_SHORTSENSE;
   1743  1.16    bouyer 		sc_xfer->sense.atapi_sense = chp->ch_error;
   1744  1.16    bouyer 		if ((sc_xfer->xs_periph->periph_quirks &
   1745  1.16    bouyer 		    PQUIRK_NOSENSE) == 0) {
   1746  1.16    bouyer 			/* ask scsipi to send a REQUEST_SENSE */
   1747  1.16    bouyer 			sc_xfer->error = XS_BUSY;
   1748  1.16    bouyer 			sc_xfer->status = SCSI_CHECK;
   1749  1.16    bouyer 		}
   1750  1.16    bouyer 	}
   1751   1.8    bouyer 	scsipi_done(sc_xfer);
   1752   1.8    bouyer 	atastart(chp);
   1753   1.8    bouyer 	return 0;
   1754   1.8    bouyer }
   1755   1.8    bouyer 
   1756  1.29  jakllsch static void
   1757   1.8    bouyer ahci_atapi_kill_xfer(struct ata_channel *chp, struct ata_xfer *xfer, int reason)
   1758   1.8    bouyer {
   1759   1.8    bouyer 	struct scsipi_xfer *sc_xfer = xfer->c_cmd;
   1760   1.8    bouyer 	struct ahci_channel *achp = (struct ahci_channel *)chp;
   1761   1.8    bouyer 	int slot = 0; /* XXX slot */
   1762   1.8    bouyer 
   1763   1.8    bouyer 	achp->ahcic_cmds_active &= ~(1 << slot);
   1764   1.8    bouyer 
   1765   1.8    bouyer 	/* remove this command from xfer queue */
   1766   1.8    bouyer 	switch (reason) {
   1767   1.8    bouyer 	case KILL_GONE:
   1768   1.8    bouyer 		sc_xfer->error = XS_DRIVER_STUFFUP;
   1769   1.8    bouyer 		break;
   1770   1.8    bouyer 	case KILL_RESET:
   1771   1.8    bouyer 		sc_xfer->error = XS_RESET;
   1772   1.8    bouyer 		break;
   1773   1.8    bouyer 	default:
   1774   1.8    bouyer 		printf("ahci_ata_atapi_kill_xfer: unknown reason %d\n", reason);
   1775   1.8    bouyer 		panic("ahci_ata_atapi_kill_xfer");
   1776   1.8    bouyer 	}
   1777   1.8    bouyer 	ata_free_xfer(chp, xfer);
   1778   1.8    bouyer 	scsipi_done(sc_xfer);
   1779   1.8    bouyer }
   1780   1.8    bouyer 
   1781  1.29  jakllsch static void
   1782   1.8    bouyer ahci_atapi_probe_device(struct atapibus_softc *sc, int target)
   1783   1.8    bouyer {
   1784   1.8    bouyer 	struct scsipi_channel *chan = sc->sc_channel;
   1785   1.8    bouyer 	struct scsipi_periph *periph;
   1786   1.8    bouyer 	struct ataparams ids;
   1787   1.8    bouyer 	struct ataparams *id = &ids;
   1788  1.13      cube 	struct ahci_softc *ahcic =
   1789  1.13      cube 	    device_private(chan->chan_adapter->adapt_dev);
   1790   1.8    bouyer 	struct atac_softc *atac = &ahcic->sc_atac;
   1791   1.8    bouyer 	struct ata_channel *chp = atac->atac_channels[chan->chan_channel];
   1792   1.8    bouyer 	struct ata_drive_datas *drvp = &chp->ch_drive[target];
   1793   1.8    bouyer 	struct scsipibus_attach_args sa;
   1794   1.8    bouyer 	char serial_number[21], model[41], firmware_revision[9];
   1795   1.8    bouyer 	int s;
   1796   1.8    bouyer 
   1797   1.8    bouyer 	/* skip if already attached */
   1798   1.8    bouyer 	if (scsipi_lookup_periph(chan, target, 0) != NULL)
   1799   1.8    bouyer 		return;
   1800   1.8    bouyer 
   1801   1.8    bouyer 	/* if no ATAPI device detected at attach time, skip */
   1802  1.40    bouyer 	if (drvp->drive_type != ATA_DRIVET_ATAPI) {
   1803   1.8    bouyer 		AHCIDEBUG_PRINT(("ahci_atapi_probe_device: drive %d "
   1804   1.8    bouyer 		    "not present\n", target), DEBUG_PROBE);
   1805   1.8    bouyer 		return;
   1806   1.8    bouyer 	}
   1807   1.8    bouyer 
   1808   1.8    bouyer 	/* Some ATAPI devices need a bit more time after software reset. */
   1809   1.8    bouyer 	delay(5000);
   1810   1.8    bouyer 	if (ata_get_params(drvp,  AT_WAIT, id) == 0) {
   1811   1.8    bouyer #ifdef ATAPI_DEBUG_PROBE
   1812   1.8    bouyer 		printf("%s drive %d: cmdsz 0x%x drqtype 0x%x\n",
   1813  1.14      cube 		    AHCINAME(ahcic), target,
   1814   1.8    bouyer 		    id->atap_config & ATAPI_CFG_CMD_MASK,
   1815   1.8    bouyer 		    id->atap_config & ATAPI_CFG_DRQ_MASK);
   1816   1.8    bouyer #endif
   1817   1.8    bouyer 		periph = scsipi_alloc_periph(M_NOWAIT);
   1818   1.8    bouyer 		if (periph == NULL) {
   1819  1.14      cube 			aprint_error_dev(sc->sc_dev,
   1820  1.14      cube 			    "unable to allocate periph for drive %d\n",
   1821  1.14      cube 			    target);
   1822   1.8    bouyer 			return;
   1823   1.8    bouyer 		}
   1824   1.8    bouyer 		periph->periph_dev = NULL;
   1825   1.8    bouyer 		periph->periph_channel = chan;
   1826   1.8    bouyer 		periph->periph_switch = &atapi_probe_periphsw;
   1827   1.8    bouyer 		periph->periph_target = target;
   1828   1.8    bouyer 		periph->periph_lun = 0;
   1829   1.8    bouyer 		periph->periph_quirks = PQUIRK_ONLYBIG;
   1830   1.8    bouyer 
   1831   1.8    bouyer #ifdef SCSIPI_DEBUG
   1832   1.8    bouyer 		if (SCSIPI_DEBUG_TYPE == SCSIPI_BUSTYPE_ATAPI &&
   1833   1.8    bouyer 		    SCSIPI_DEBUG_TARGET == target)
   1834   1.8    bouyer 			periph->periph_dbflags |= SCSIPI_DEBUG_FLAGS;
   1835   1.8    bouyer #endif
   1836   1.8    bouyer 		periph->periph_type = ATAPI_CFG_TYPE(id->atap_config);
   1837   1.8    bouyer 		if (id->atap_config & ATAPI_CFG_REMOV)
   1838   1.8    bouyer 			periph->periph_flags |= PERIPH_REMOVABLE;
   1839   1.8    bouyer 		if (periph->periph_type == T_SEQUENTIAL) {
   1840   1.8    bouyer 			s = splbio();
   1841  1.40    bouyer 			drvp->drive_flags |= ATA_DRIVE_ATAPIDSCW;
   1842   1.8    bouyer 			splx(s);
   1843   1.8    bouyer 		}
   1844   1.8    bouyer 
   1845   1.8    bouyer 		sa.sa_periph = periph;
   1846   1.8    bouyer 		sa.sa_inqbuf.type =  ATAPI_CFG_TYPE(id->atap_config);
   1847   1.8    bouyer 		sa.sa_inqbuf.removable = id->atap_config & ATAPI_CFG_REMOV ?
   1848   1.8    bouyer 		    T_REMOV : T_FIXED;
   1849  1.56  christos 		strnvisx(model, sizeof(model), id->atap_model, 40,
   1850  1.56  christos 		    VIS_TRIM|VIS_SAFE|VIS_OCTAL);
   1851  1.56  christos 		strnvisx(serial_number, sizeof(serial_number), id->atap_serial,
   1852  1.56  christos 		    20, VIS_TRIM|VIS_SAFE|VIS_OCTAL);
   1853  1.56  christos 		strnvisx(firmware_revision, sizeof(firmware_revision),
   1854  1.56  christos 		    id->atap_revision, 8, VIS_TRIM|VIS_SAFE|VIS_OCTAL);
   1855   1.8    bouyer 		sa.sa_inqbuf.vendor = model;
   1856   1.8    bouyer 		sa.sa_inqbuf.product = serial_number;
   1857   1.8    bouyer 		sa.sa_inqbuf.revision = firmware_revision;
   1858   1.8    bouyer 
   1859   1.8    bouyer 		/*
   1860   1.8    bouyer 		 * Determine the operating mode capabilities of the device.
   1861   1.8    bouyer 		 */
   1862   1.8    bouyer 		if ((id->atap_config & ATAPI_CFG_CMD_MASK) == ATAPI_CFG_CMD_16)
   1863   1.8    bouyer 			periph->periph_cap |= PERIPH_CAP_CMD16;
   1864   1.8    bouyer 		/* XXX This is gross. */
   1865   1.8    bouyer 		periph->periph_cap |= (id->atap_config & ATAPI_CFG_DRQ_MASK);
   1866   1.8    bouyer 
   1867   1.8    bouyer 		drvp->drv_softc = atapi_probe_device(sc, target, periph, &sa);
   1868   1.8    bouyer 
   1869   1.8    bouyer 		if (drvp->drv_softc)
   1870   1.8    bouyer 			ata_probe_caps(drvp);
   1871   1.8    bouyer 		else {
   1872   1.8    bouyer 			s = splbio();
   1873  1.40    bouyer 			drvp->drive_type = ATA_DRIVET_NONE;
   1874   1.8    bouyer 			splx(s);
   1875   1.8    bouyer 		}
   1876   1.8    bouyer 	} else {
   1877   1.8    bouyer 		AHCIDEBUG_PRINT(("ahci_atapi_get_params: ATAPI_IDENTIFY_DEVICE "
   1878   1.8    bouyer 		    "failed for drive %s:%d:%d: error 0x%x\n",
   1879   1.8    bouyer 		    AHCINAME(ahcic), chp->ch_channel, target,
   1880   1.8    bouyer 		    chp->ch_error), DEBUG_PROBE);
   1881   1.8    bouyer 		s = splbio();
   1882  1.40    bouyer 		drvp->drive_type = ATA_DRIVET_NONE;
   1883   1.8    bouyer 		splx(s);
   1884   1.8    bouyer 	}
   1885   1.8    bouyer }
   1886   1.8    bouyer #endif /* NATAPIBUS */
   1887