Home | History | Annotate | Line # | Download | only in ic
am79c930reg.h revision 1.4 
      1 /* $NetBSD: am79c930reg.h,v 1.4 2003/11/02 11:07:45 wiz Exp $ */
      2 
      3 /*-
      4  * Copyright (c) 1999 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Bill Sommerfeld
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  * 3. All advertising materials mentioning features or use of this software
     19  *    must display the following acknowledgement:
     20  *        This product includes software developed by the NetBSD
     21  *        Foundation, Inc. and its contributors.
     22  * 4. Neither the name of The NetBSD Foundation nor the names of its
     23  *    contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     27  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     28  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     29  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     30  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     31  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     32  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     33  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     34  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     35  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     36  * POSSIBILITY OF SUCH DAMAGE.
     37  */
     38 
     39 /*
     40  * Device register definitions gleaned from from the AMD "Am79C930
     41  * PCnet(tm)-Mobile Single Chip Wireless LAN Media Access Controller"
     42  * data sheet, AMD Pub #20183, Rev B, amendment/0, issue date August 1997.
     43  *
     44  * As of 1999/10/23, this was available from AMD's web site in PDF
     45  * form.
     46  */
     47 
     48 
     49 /*
     50  * The 79c930 contains a bus interface unit, a media access
     51  * controller, and a tranceiver attachment interface.
     52  * The MAC contains an 80188 CPU core.
     53  * typical devices built around this chip typically add 32k or 64k of
     54  * memory for buffers.
     55  *
     56  * The 80188 runs firmware which handles most of the 802.11 gorp, and
     57  * communicates with the host using shared data structures in this
     58  * memory; the specifics of the shared memory layout are not covered
     59  * in this source file; see <dev/ic/am80211fw.h> for details of that layer.
     60  */
     61 
     62 /*
     63  * Device Registers
     64  */
     65 
     66 #define AM79C930_IO_BASE	0
     67 #define AM79C930_IO_SIZE	16
     68 #define AM79C930_IO_SIZE_BIG	40
     69 #define AM79C930_IO_ALIGN	0x40	/* am79c930 decodes lower 6bits */
     70 
     71 
     72 #define AM79C930_GCR	0	/* General Config Register */
     73 
     74 #define AM79C930_GCR_SWRESET	0x80	/* software reset */
     75 #define AM79C930_GCR_CORESET	0x40	/* core reset */
     76 #define AM79C930_GCR_DISPWDN	0x20	/* disable powerdown */
     77 #define AM79C930_GCR_ECWAIT	0x10	/* embedded controller wait */
     78 #define AM79C930_GCR_ECINT	0x08 	/* interrupt from embedded ctrlr */
     79 #define AM79C930_GCR_INT2EC	0x04 	/* interrupt to embedded ctrlr */
     80 #define AM79C930_GCR_ENECINT	0x02 	/* enable interrupts from e.c. */
     81 #define AM79C930_GCR_DAM	0x01 	/* direct access mode (read only) */
     82 
     83 #define AM79C930_GCR_BITS "\020\1DAM\2ENECINT\3INT2EC\4ECINT\5ECWAIT\6DISPWDN\7CORESET\010SWRESET"
     84 
     85 #define AM79C930_BSS	1	/* Bank Switching Select register */
     86 
     87 #define AM79C930_BSS_ECATR	0x80 	/* E.C. ALE test read */
     88 #define AM79C930_BSS_FS		0x20 	/* Flash Select */
     89 #define AM79C930_BSS_MBS	0x18	/* Memory Bank Select */
     90 #define AM79C930_BSS_EIOW	0x04 	/* Expand I/O Window */
     91 #define AM79C930_BSS_TBS	0x03 	/* TAI Bank Select */
     92 
     93 #define AM79C930_LMA_LO	2	/* Local Memory Address register (low byte) */
     94 
     95 #define AM79C930_LMA_HI 3	/* Local Memory Address register (high byte) */
     96 
     97 				/* set this bit to turn off ISAPnP version */
     98 #define AM79C930_LMA_HI_ISAPWRDWN	0x80
     99 
    100 /*
    101  * mmm, inconsistency in chip documentation:
    102  * According to page 79--80, all four of the following are equivalent
    103  * and address the single byte pointed at by BSS_{FS,MBS} | LMA_{HI,LO}
    104  * According to tables on p63 and p67, they're the LSB through MSB
    105  * of a 32-bit word.
    106  */
    107 
    108 #define AM79C930_IODPA		4 /* I/O Data port A */
    109 #define AM79C930_IODPB		5 /* I/O Data port B */
    110 #define AM79C930_IODPC	        6 /* I/O Data port C */
    111 #define AM79C930_IODPD		7 /* I/O Data port D */
    112 
    113 
    114 /*
    115  * Tranceiver Attachment Interface Registers (TIR space)
    116  * (omitted for now, since host access to them is for diagnostic
    117  * purposes only).
    118  */
    119 
    120 /*
    121  * memory space goo.
    122  */
    123 
    124 #define AM79C930_MEM_SIZE	0x8000		 /* 32k */
    125 #define AM79C930_MEM_BASE	0x0		 /* starting at 0 */
    126