am9513reg.h revision 1.2
1 /* $NetBSD: am9513reg.h,v 1.2 2005/02/27 00:27:00 perry Exp $ */ 2 3 /*- 4 * Copyright (c) 2001 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Matthew Fredette. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 39 #ifndef _AM9513REG_H 40 #define _AM9513REG_H 41 42 /* 43 * Driver support for the Am9513 timer chip. See 44 * http://www.amd.com/products/cpg/techdocs/misc/03402/03402.html 45 * for data sheets. 46 */ 47 48 struct am9513 { 49 u_int16_t am9513_clk_data; /* data register */ 50 u_int16_t am9513_clk_cmd; /* command register */ 51 }; 52 53 #define AM9513_CLK_DATA 0 54 #define AM9513_CLK_CMD 2 55 56 /* 57 * All of the below macros are for use in bitfields in the Counter 58 * Mode (CM) Register. 59 */ 60 61 /* Gating control, CM[13:15]: */ 62 /* 63 * Legend: A[HL][LE]? 64 * | | `-> L = level, E = edge 65 * | `-> H = high, L = low 66 * `-> active 67 * 68 * P1 = plus one, M1 = minus one 69 */ 70 #define AM9513_CM_GATING_NONE (0x0 << 13) 71 #define AM9513_CM_GATING_AH_TCN_M1 (0x1 << 13) 72 #define AM9513_CM_GATING_AHL_GATEN_P1 (0x2 << 13) 73 #define AM9513_CM_GATING_AHL_GATEN_M1 (0x3 << 13) 74 #define AM9513_CM_GATING_AHL_GATEN (0x4 << 13) 75 #define AM9513_CM_GATING_ALL_GATEN (0x5 << 13) 76 #define AM9513_CM_GATING_AHE_GATEN (0x6 << 13) 77 #define AM9513_CM_GATING_ALE_GATEN (0x7 << 13) 78 79 /* Source edge, CM[12]: */ 80 #define AM9513_CM_SOURCE_EDGE_RISING (0 << 12) 81 #define AM9513_CM_SOURCE_EDGE_FALLING (1 << 12) 82 83 /* Count sources, CM[8:11]: */ 84 #define AM9513_CM_SOURCE_TCN1 (0x0 << 8) 85 #define AM9513_CM_SOURCE_SRC1 (0x1 << 8) 86 #define AM9513_CM_SOURCE_SRC2 (0x2 << 8) 87 #define AM9513_CM_SOURCE_SRC3 (0x3 << 8) 88 #define AM9513_CM_SOURCE_SRC4 (0x4 << 8) 89 #define AM9513_CM_SOURCE_SRC5 (0x5 << 8) 90 #define AM9513_CM_SOURCE_GATE1 (0x6 << 8) 91 #define AM9513_CM_SOURCE_GATE2 (0x7 << 8) 92 #define AM9513_CM_SOURCE_GATE3 (0x8 << 8) 93 #define AM9513_CM_SOURCE_GATE4 (0x9 << 8) 94 #define AM9513_CM_SOURCE_GATE5 (0xA << 8) 95 #define AM9513_CM_SOURCE_F1 (0xB << 8) 96 #define AM9513_CM_SOURCE_F2 (0xC << 8) 97 #define AM9513_CM_SOURCE_F3 (0xD << 8) 98 #define AM9513_CM_SOURCE_F4 (0xE << 8) 99 #define AM9513_CM_SOURCE_F5 (0xF << 8) 100 101 /* Count control, CM[7]: */ 102 #define AM9513_CM_SPECIAL_GATE_ENA (1 << 7) 103 #define AM9513_CM_SPECIAL_GATE_DIS (0 << 7) 104 105 /* Counter reload source, CM[6]: */ 106 #define AM9513_CM_RELOAD_SOURCE_LOAD (0 << 6) 107 #define AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD (1 << 6) 108 109 /* Counter repeat control, CM[5]: */ 110 #define AM9513_CM_REPEAT_DIS (0 << 5) 111 #define AM9513_CM_REPEAT_ENA (1 << 5) 112 113 /* Counter type, CM[4]: */ 114 #define AM9513_CM_TYPE_BIN (0 << 4) 115 #define AM9513_CM_TYPE_BCD (1 << 4) 116 117 /* Counter direction, CM[3]: */ 118 #define AM9513_CM_DIR_DOWN (0 << 3) 119 #define AM9513_CM_DIR_UP (1 << 3) 120 121 /* Output control, CM[0:2]: */ 122 #define AM9513_CM_OUTPUT_OL (0x0 << 0) /* inactive, output low */ 123 #define AM9513_CM_OUTPUT_AHTCP (0x1 << 0) /* active high terminal count pulse */ 124 #define AM9513_CM_OUTPUT_TC_TOGGLED (0x2 << 0) /* TC toggled */ 125 #define AM9513_CM_OUTPUT_OHI (0x4 << 0) /* inactive, output high impedance */ 126 #define AM9513_CM_OUTPUT_ALTCP (0x5 << 0) /* active low terminal count pulse */ 127 128 /* The modes are various combinations of the above: */ 129 130 /* Mode A: */ 131 #define AM9513_CM_MODE_A (AM9513_CM_GATING_NONE \ 132 | AM9513_CM_SPECIAL_GATE_DIS \ 133 | AM9513_CM_RELOAD_SOURCE_LOAD \ 134 | AM9513_CM_REPEAT_DIS) 135 136 /* 137 * Mode B is just like mode A, except you OR in the 138 * AM9513_CM_GATING_ value for the *level* you want: 139 */ 140 #define AM9513_CM_MODE_B AM9513_CM_MODE_A 141 142 /* 143 * Mode C is just like mode A, except you OR in the 144 * AM9513_CM_GATING_ value for the *edge* you want: 145 */ 146 #define AM9513_CM_MODE_C AM9513_CM_MODE_A 147 148 /* Mode D: */ 149 #define AM9513_CM_MODE_D (AM9513_CM_GATING_NONE \ 150 | AM9513_CM_SPECIAL_GATE_DIS \ 151 | AM9513_CM_RELOAD_SOURCE_LOAD \ 152 | AM9513_CM_REPEAT_ENA) 153 154 /* 155 * Mode E is just like mode D, except you OR in the 156 * AM9513_CM_GATING_ value for the *level* you want: 157 */ 158 #define AM9513_CM_MODE_E AM9513_CM_MODE_D 159 160 /* 161 * Mode F is just like mode D, except you OR in the 162 * AM9513_CM_GATING_ value for the *edge* you want: 163 */ 164 #define AM9513_CM_MODE_F AM9513_CM_MODE_D 165 166 /* Mode G: */ 167 #define AM9513_CM_MODE_G (AM9513_CM_GATING_NONE \ 168 | AM9513_CM_SPECIAL_GATE_DIS \ 169 | AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD \ 170 | AM9513_CM_REPEAT_DIS) 171 172 /* 173 * Mode H is just like mode G, except you OR in the 174 * AM9513_CM_GATING_ value for the *level* you want: 175 */ 176 #define AM9513_CM_MODE_H AM9513_CM_MODE_G 177 178 /* 179 * Mode I is just like mode G, except you OR in the 180 * AM9513_CM_GATING_ value for the *edge* you want: 181 */ 182 #define AM9513_CM_MODE_I AM9513_CM_MODE_G 183 184 /* Mode J: */ 185 #define AM9513_CM_MODE_J (AM9513_CM_GATING_NONE \ 186 | AM9513_CM_SPECIAL_GATE_DIS \ 187 | AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD \ 188 | AM9513_CM_REPEAT_ENA) 189 190 /* 191 * Mode K is just like mode J, except you OR in the 192 * AM9513_CM_GATING_ value for the *level* you want: 193 */ 194 #define AM9513_CM_MODE_K AM9513_CM_MODE_J 195 196 /* 197 * Mode L is just like mode J, except you OR in the 198 * AM9513_CM_GATING_ value for the *edge* you want: 199 */ 200 #define AM9513_CM_MODE_L AM9513_CM_MODE_J 201 202 /* Mode N: */ 203 #define AM9513_CM_MODE_N (AM9513_CM_GATING_NONE \ 204 | AM9513_CM_SPECIAL_GATE_ENA \ 205 | AM9513_CM_RELOAD_SOURCE_LOAD \ 206 | AM9513_CM_REPEAT_DIS) 207 208 /* 209 * Mode O is just like mode N, except you OR in the 210 * AM9513_CM_GATING_ value for the *edge* you want: 211 */ 212 #define AM9513_CM_MODE_O AM9513_CM_MODE_N 213 214 /* Mode Q; OR in the AM9513_CM_GATING_ value for the *level* you want: */ 215 #define AM9513_CM_MODE_Q (AM9513_CM_GATING_NONE \ 216 | AM9513_CM_SPECIAL_GATE_ENA \ 217 | AM9513_CM_RELOAD_SOURCE_LOAD \ 218 | AM9513_CM_REPEAT_ENA) 219 220 /* 221 * Mode R is just like mode N, except you OR in the 222 * AM9513_CM_GATING_ value for the *edge* you want: 223 */ 224 #define AM9513_CM_MODE_R AM9513_CM_MODE_Q 225 226 /* Mode S: */ 227 #define AM9513_CM_MODE_S (AM9513_CM_GATING_NONE \ 228 | AM9513_CM_SPECIAL_GATE_ENA \ 229 | AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD \ 230 | AM9513_CM_REPEAT_DIS) 231 232 /* Mode V: */ 233 #define AM9513_CM_MODE_V (AM9513_CM_GATING_NONE \ 234 | AM9513_CM_SPECIAL_GATE_ENA \ 235 | AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD \ 236 | AM9513_CM_REPEAT_ENA) 237 238 /* Given an AM9513_CM_SOURCE_F? value, return the divisor: */ 239 #define AM9513_CM_SOURCE_Fn_DIV(func) (1 << (((func) - AM9513_CM_SOURCE_F1) >> 6)) 240 241 /* 242 * Given a basic frequency and an AM9513_CM_SOURCE_F? value, returns 243 * the number of clock ticks for a certain frequency: 244 */ 245 #define AM9513_TICKS(basic, func, hz) (((basic) / AM9513_CM_SOURCE_Fn_DIV(func)) / (hz)) 246 247 /* These are the timer numbers: */ 248 #define AM9513_TIMER1 (1) 249 #define AM9513_TIMER2 (2) 250 #define AM9513_TIMER3 (3) 251 #define AM9513_TIMER4 (4) 252 #define AM9513_TIMER5 (5) 253 254 /* 255 * This macro is used to compose a bitmask of times for those 256 * commands that take a bitmask: 257 */ 258 #define AM9513_TIMER_BIT(timer) (1 << ((timer) - 1)) 259 260 /* When in 16-bit mode, the high 8 bits of every command must be ones: */ 261 #define _AM9513_CMD(x) (0xFF00 | (x)) 262 263 /* Commands: */ 264 #define AM9513_CMD_LOAD_MODE(timer) _AM9513_CMD(0x00 | (timer)) 265 #define AM9513_CMD_LOAD_LOAD(timer) _AM9513_CMD(0x08 | (timer)) 266 #define AM9513_CMD_LOAD_HOLD(timer) _AM9513_CMD(0x10 | (timer)) 267 #define AM9513_CMD_ARM(timers) _AM9513_CMD(0x20 | (timers)) 268 #define AM9513_CMD_LOAD(timers) _AM9513_CMD(0x40 | (timers)) 269 #define AM9513_CMD_LOAD_ARM(timers) _AM9513_CMD(0x60 | (timers)) 270 #define AM9513_CMD_SAVE(timers) _AM9513_CMD(0xA0 | (timers)) 271 #define AM9513_CMD_DISARM(timers) _AM9513_CMD(0xC0 | (timers)) 272 #define AM9513_CMD_CLEAR_OUTPUT(timer) _AM9513_CMD(0xE0 | (timer)) 273 #define AM9513_CMD_RESET _AM9513_CMD(0xFF) 274 275 /* These are mode register values for various uses */ 276 #define AM9513_TICK_MODE (AM9513_F2+0x22) /* F2 + Operating mode D */ 277 #define AM9513_UART_MODE (AM9513_F1+0x22) /* F1 + Operating mode D */ 278 #define AM9513_FAST_LO_MODE (AM9513_F3+0x28) /* F3, repeat, count up */ 279 #define AM9513_FAST_HI_MODE (0x0028) /* TC of LO, repeat, count up */ 280 281 #endif /* _AM9513REG_H */ 282
Indexes created Mon Sep 29 21:09:56 GMT 2025